Post on 20-Jul-2020
Temple
There is a temple for Lord Vinayaga in our campus. Poojas are being performed daily for the prosperity and peaceful mind of one and all. The temple is located in a serene atmosphere.
The Kongu Vellalar Institute of Technology Trust was founded in the year 1983 by 38 philanthropists of the Kongu Vellalar Community. The following Institutions established by the Trust are
Kongu Engineering College
Kongu Arts & Science College
Kongu Industrial training Centre
Kongu National Matriculation Hr Secy School
Dispensary
It is constructed at a cost of Rs.5,43,750 with an area of 1450 sq.ft with two beds. Doctors are employed to take care of the students and faculties who come for treatment. An ambulance van is available for emergency.
Driving School
There is a driving school under the supervision of our Mechanical Engineering department. It arranges driving training of two wheelers and four wheelers for the students and faculties. We arrange driving licence also.
Insurance
Rural Postal Life Insurance is arranged for all.
Post Office
The post office extends postal services for the welfare of students and faculties inside the campus.
Bank : There is a branch of Karur Vysya Bank Ltd., inside our campus. ATM facilities have been provided. It extends banking services to the students and faculties.
www.kongupolytechnic.ac.in
Contact fThe PrincipalKongu Polytechnic CollegeKEC nagar,Perundurai R.S Road,Thoppupalayam, Perundurai - 638 052, Erode Dist.Tel : 04294- 220471, 225505, 226779 Fax: 04294- 220116E-mail : kpc@kongu.ac.in, kpc_plc@yahoo.com
or details
MODERNIZED FACILITIES
Estd. 1983
Kongu Polytechnic College (Approved by AICTE, New Delhi & Govt. of TamilNadu andan ISO 9001-2008 certified Institution)
25ationc ud E niY ecne lela cers Ex of
SILVER JUBLIEE 1984 - 2009
Providing Career Avenues&
Best Quality of Education
www.kongupolytechnic.ac.in
BLA
CK
& W
HIT
E 0
422
4294
242
Estd. 1983 Kongu Polytechnic College
(Approved by AICTE, New Delhi & Govt. of TamilNadu ) FS 69617
ISO 9001 : 2008
TM
ANABACCREDITED
BSI
K NGUAssuring the Best
There is NCC at our college. It aims at developing the qualities of leadership discipline, duty consciousness and national service in the minds of students. Total strength of NCC is 70.
NCC officer trains students.
Prof. V. Vedhagiri Eswaran M.E., M.B.A.,Principal
www.kongupolytechnic.ac.in
“ To impart commendable education and develop the students’ knowledge in the field of Engineering.”
“ To refine skills of the students so as to create skillful engineers.”
Vision Mission
Education is the ability to meet life's challenges and is a potent media to enable us to face everyday challenges. We understand that quality education is vital in this era of globalization and hence our mission is to produce talented engineers. To fulfill our goals, our college provides the best quality and value based technical education and hands on training to the students. We assure the finest education to enable the students to carve a bright future.
Situated at Perundurai on the NH47, our college is just 20 km away from both Erode railway station and Bus stand. It is 80 km from Coimbatore and 70 km from Salem airports.
LOCATION
CORRESPONDENT'S MESSAGE
Quality education is our motto. For this we consistently strive to ensure that the students receive the best insight in terms of theory and practice.
QUALITY POLICY
Imbibing values to inculcate experience
A fleet of 75 buses is available for the students and faculties to commute within a radius of 60 km. Free shuttle trip is also provided between the college campus and Perundurai.TRAVEL
Ten courses for valuable learning
Diploma in Civil Engineering*
Diploma in Mechanical Engineering*
Diploma in Automobile Engineering*
Diploma in Electronics & Communication Engineering*
Diploma in Electrical & Electronics Engineering*
Diploma in Computer Engineering*
Diploma in Chemical Engineering
Diploma in Information Technology
Diploma in Instrumentation & Control Engineering
Diploma in Electronics and Robotics
* Six of programmes are accredited by The National Board of Accreditation (AICTE), New Delhi.
>
>
>
>
>
>
>
>
>
>
COURSES OFFERED
TOWARDS EXCELLENCE
Established in the year 1983 by Kongu Vellalar Institute of Technology Trust, Kongu Polytechnic College has been consistently rendering knowledge oriented service in the realms of Science, Engineering and Technology for twenty five years. With a motto of providing exemplary technical wisdom we are constantly moving towards the greatest height of the topmost institution by providing the best quality education.
We believe that excellent education can be achieved through only ample experience. Our college is equipped with excellent infrastructural facilities and efficient faculties to ensure that the students gain hands-on-training in their respective areas of branches. Our team of well qualified staff has been successful in producing state level rank holders over the years. Our college is, infact, an ideal place for the best education, exposure and placement in a dynamic environment.
An institution with volumes of distinctions
ABOUT US
25cation duE in Y e cne llea xcers of E
SILVER JUBLIEE 1984 - 2009
TOWARDS EXCELLENCE
We have a well-equipped infrastructure to enhance the learning experience of the students and refine their technical skills. The following have well-equipped infrastructures.
Campus with modernized facilities
MODERNIZED FACILITIES
Our central library is stacked with national international books and journals with technical reports, monographs, statistical data etc. 550 journals and magazines in the field of science and technology are also available. We also have an online digital library comprising more than 550 magazines and journals. Apart from this, various other Digital libraries like ACM, ASME, IEEE are present. ACM is for General books and journals, while ASME is for Management related resources and IEEE is for all computer and communication based sources.
Our library functions with the following
OPAC (On-line Public Access Catalogue)
CD_ROM Database (Full Text & Abstract Service)
Bibliography Service
Current Awareness Service
Reprographic Service
Wi-fi Internet Service
?
?
?
?
?
?
Library & Information Centre
www.kongupolytechnic.ac.in
Physics LaboratoryA physics laboratory with total area of 212.51 square meters is highly equipped with instruments worth Rs 6.25 Lakhs. It enables the students to enhance their basic knowledge in the field of engineering. Chemistry LaboratoryA well constructed Chemistry laboratory with a total area of 233.51 square meters contains chemicals and apparatus worth Rs 1.5 Lakhs. Students are encouraged and guided to update knowledge concentrating in the scenario of engineering. Work ShopA well equipped new workshop has been established at a cost of Rs. 3 Lakhs, with size of 247.48 square meters. It enables the students to develop their basic knowledge in the engineering field. Computer Application LaboratoryAn advanced computer application laboratory exclusively for I year students has been established at a cost of Rs.29 lakhs with a total area of 158 square meters. The advanced technology enables the students to develop their basic knowledge about computers.
CAD CENTREAn advanced CAD application laboratory exclusively for students has been established at a cost of Rs.42 Lakhs with a total area of 190Sq.m. The advancedsoftware tools like Pro-E, CATIA, Master CAM, etc, are available in or lab enables the students to develop their Design and Modeling Knowledge.
WELDING, FOUNDRY & SMITHY LAB Modernized foundry, smithy and welding labs have been established at an overall cost of Rs.9 Lakhs with a total area of 250 sqm Advanced welding, foundry and smithy techniques have been instructed to the students.
SPECIAL MACHINE LAB & MACHINE SHOP Well equipped special machines labs have been established at a cost of Rs.41 lakhs with a total area of 250 sqm. Modern machining techniques are taught with high precision machine tools. Well equipped foundry, machine and welding labs have been established at a cost of Rs.40 lakhs.
LATHE SECTIONStudents get practical training about turning, thread cutting, knurling, bushing, drilling and boring at lathe section. Its value is Rs.40 lakhs.
DEPARTMENT OF MECHANICAL ENGINEERING
Dheeran Chinnamalai Seminar Hall Lectures, presentations, workshops, association functions with updated audio-visual teaching aids, are conducted at our Dheeran Chinnamalai seminar hall. It is air conditioned and has a seating capacity of 200. It is an ideal platform where students shape their personalities with updated knowledge.
Auditorium Maharaja Auditorium inside the spectacular greenery campus has a seating capacity of 1000. Seminars, meetings, conferences, symposiums and other functions are regularly conducted.
Kongu Conventional Centre The Kongu Conventional Centre is one of the most prestigious projects costly more than Rs 15 crores. with a seating capacity of 4500 spread over 68000 sq.ft. It is the largest one in south Asia. It is equipped with green rooms, multilevel stairs, VIP suites, badminton and basket ball courts.
Seminar Halls & Auditorium
Basic Science Department
English Communication LabEnglish Communication Laboratory has been established at a cost of Rs.2 Lakhs with a size of 133.51 square meters. The lab is endowed with advanced facilities so as to enable the students to develop communication skills in English.
25cation duE in Y e cne llea xcers of E
SILVER JUBLIEE 1984 - 2009
Automobile lab has been constructed at a sq feet of 7728 with modern engines, FIP Calibration Bench, Testing equipments , computerized wheel alignment balancing transmission equipments are two and four wheelers are designed to train students. The reconditioning section is well equipped with Brake Drum lathe, Line Boring Machine, Engine Reboring machine, Honing Machine and Valve Refacer.
DEPARTMENT OF AUTOMOBILE ENGINEERING
INFRASTRUCTURE
25cation duE in Y e cne llea xcers of E
SILVER JUBLIEE 1984 - 2009 DEPARTMENTS
DEPARTMENT OF ELECTRONICS & COMMUNICATION ENGINEERING ECE COMPUTER CENTER
The area of this center is 16.90m X 7.90m.This lab consists of Intel Pentium Xeon Server with LAN of 61 terminals, and various peripherals. This center consists of Microsoft licence softwares and simulation softwares such as LAB VIEW, PSpice, MP LAB, ORCAD, KEILc and MODEL SIM. The same lab is extended for VLSI and EMBEDDED SYSTEM DESIGN experiments with Xilinx Spartan trainer kits and embedded kits worth Rs. 4,50,000.00 respectively. The total equipment value of this laboratory is Rs.27,78,547 /-
DEPARTMENT OF CHEMICAL ENGINEERING
The fluid mechanics, mechanical separation process control and heat and mass transfer laboratories are well equipped with latest experimental setups. Students do the experiment well.
ELECTRONICS AND COMMUNICATION LABThe electronics laboratory is equipped with power supplies, CRO's, function generators, and measuring instruments.
The communication laboratory is equipped with radio receiver kits, T.V. demonstration kits, digital receivers, fiber optical kits and various antenna models.
These labs are also used to conduct evening, summer and winter courses. The areas of both the laboratories are 13.60mX7.80m.The total value of both the labs is Rs. 16,02,368 /-
MICROPROCESSOR LABThe microprocessor lab is equipped with 8085, 8086 based on microprocessor kits and 8051 microcontroller kits. The area of this laboratory is 10.00mX10.00m.The total equipment value of this lab is Rs. 9,87,643 /-
ELECTRONICS II AND DIGITAL LABElectronics II & digital lab is equipped with power supplies, CRO's, function generators, digital kits and measuring instruments. The area of this laboratory is 10.00mX7.90m. The toal value of these labs is Rs 12,50,000 /-
A Computer Centre has been established at a cost of Rs. 35 lakhs with a size of 16.9m *7.9 m. The lab is endowed with advanced configuration systems (72 nos) with WindowsXP & Linux Operating Systems and Software's like MS-Office, C, C++, Java, Oracle, Multimedia, VB & VB.NET so as to enable the students to develop their knowledge in the software & hardware fields. Systems are connected in local area connection throw WINDOWS 2000 SERVER with 8 mbps leased line internet connection. 2000 students have got benefitted from the courses.
The electrical machines laboratory is used to perform the experiments on AC and DC Machines. This lab is equipped with Measuring Meters, Rectifier unit and Transformer. The area of the laboratory is 17m X 7.90m.The total value of the lab cost is Rs.15 Lakhs /-
The electrical workshop laboratory is used to perform the experiments on Electricals and electronics engineering. This lab is equipped with Measuring Meters, CRO's, function generators, and measuring instruments with all electronic devices, components and various kits. The area of the laboratory is 13.6m X7.90m.The total value of the lab cost is. Rs.12 Lakhs /-
www.kongupolytechnic.ac.in
DEPARTMENT OF ELECTRICAL & ELECTRONICS ENGINEERING
DEPARTMENT OF COMPUTER ENGINEERING
An IT CENTRE has been established at a cost of Rs. 30 lakhs with a size of16.9*7.9 meters. The lab is endowed with advanced configuration systems (61 Nos.) with Windows XP & Linux operating systems and software's like Oracle, Multimedia & VB.Net so as to enable the students to develop their knowledge in Software & Hardware field. Around 1000 students have got benefited from the courses.
DEPARTMENT OF INFORMATION TECHNOLOGY
Robotics Laboratory has been established at a cost of 6 Lakhs and it is used to know about Automation techniques for the students. We are having mini Robot, Hydraulic trainer kit, Pneumatic trainer kit, PLC trainer kit and automation software's in our Laboratory. Mini Robot is used to know about the automation techniques by using Robot programming software. Hydraulic and Pneumatic systems are used to actuate the cylinders and motors by fluids and air.PLC software is used to know about automatic programming technique. All these techniques are more helpful for the students to thrive well in Automation industry.
DEPARTMENT OF ELECTRONICS (ROBOTICS) ENGINEERING
A well equipped instrumentation lab has been established in area an of 20.20 m x 9.20 m at a cost of Rs.6 Lakhs This lab offers various process control measurements like pressure, temperature and flow. This lab is equipped with power supplies, CRO'S, function generators and measuring instruments with all electronic devices, components and kits.
DEPARTMENT OF INSTRUMENTATION & CONTROL ENGINEERING
www.kongupolytechnic.ac.in 25cation duE in Y e cne llea xcers of E
SILVER JUBLIEE 1984 - 2009
AMENITIES
HOSTEL (MEN)
Well furnished men's hostel with a plinth area of 9304.72 Sq.mt.Treated water is used for cooking and drinking purpose 24 Hrs. Ambulance facilities water heater is providedNo. of rooms available - 175Students Strength - 680TV Hall - 2Computer Centre - 32 SystemsRooms furnished with cots, chairs, drawing tables, cupboards for individualsPhone facility- STD Phone with computerized billing machine Library, Reading room, Recreation room are available Fantastic Dining hall with 2 LCD TVs
?
?
???????
?
?
?
HOSTEL (WOMEN)
Hygienic vegetarian mess is runningTreated water is used for cooking and drinking purpose24 Hrs. Ambulance facilitySolar water heater is providedNo. of rooms available - 25Students Strength - 74TV Hall - 2Computer Centre - 1 No - 32 SystemsRooms furnished with cots, chairs, drawing tables, cupboards for individualsPhone facility - STD Phone with computerized billing machineLibrary, Reading room & Laundry are available
??
???????
?
?
Campus with modernized facilities
GUEST HOUSE
A Guest house has been constructed with three suites and four guest rooms at a cost of Rs.50,50,500/- with an area of 6,615 sq.ft for guests visiting our institution. All sorts of modern facilities are available.
MACHINERY AVAILABLE
MACHINERY IN DEPARTMENTS
Radial drilling machine
Universal horizontal milling Machine
Heavy duty shaping machine
Universal vertical milling machine
Planning machine
Special survey instrument in department of civil engineering Electronic total station (sokkia series.20 & set 620 model)
AMENITIES
Every year old students get together is organized by Alumni association. It hosts the erstwhile students to share their experience, career and learning with studying college students so as to motivate them to be prosperous in future.
Regular meet ofthe Alumni
ALUMNI
DEPARTMENT OF CIVIL ENGINEERING
CAD CENTRE
Well established CAD centre is planned with high-end graphics workstations and structured cabling with a server running on WINDOWS XP and connecting 41 workstations. It offers access to Software like Auto CAD, Archi CAD and STAAD.pro, etc., It exploits brilliance and inspiration, blending each student proportionately to bring out innovation and creativity. Our department extends various consultancy for testing the materials like steel, cement, brick and aggregates.
ACTIVITIES
Welfare activities for progress
Energy Park Our college has been a pioneer in setting up an Energy Park in our campus under the sponsorship of MNES at a cost of Rs.5 lakhs. Non-conventional energy sources are exposed and the solar energy is utilized for water heating, street lamps, solar pumping inside our campus.
The Biomass Gasifier Power Plant
Using Agro wastage known as Juliflora (locally called vellikathan) as the main raw material, a 100 KWE Biomass Gasifier Power System is set up at the cost of Rs.15 lakhs. The power generated by the plant is used for various purpose inside the campus. Apart from this, students are also engaged and encouraged to do project works within the plant on automation of gas air mixing, easy opening of reactor etc.
Night Soil Based Bio-Gas Plant
A Night Soil Based Bio-Gas Plant project by Ministry of Non- Conventional Energy Sources, Government of India (MNES) and Govt of Tamilnadu is set up with a total cost of Rs.5 lakhs.
Unique projects for technological advancement Efforts for exposing
hidden talents Youth Red Cross
There is a Youth Red Cross Unit in our college through which, blood donation, first-aid and fire fighting training are conducted.
National Service Scheme
There are two units of NSS which have 100 volunteers. Our NSS units have been rendering social service since 1987 such as construction works, medical camps, technical activities, awareness programmes, cleaning works, planting of trees, de-silting programmes, road repair works, medical camps. To mark social service achievement, Our institution has been selected as the best NCC unit and NSS officers are awarded by Directorate of Technical Education, Tamilnadu Government.
Extra-curricular Activities
Competitions in Quiz, Eloquence, Drawing, Photography, singing, dancing are conducted to encourage the students to bring out their hidden talents.
Sports
The Department of Physical Education aims at encouraging the students to participate in indoor and outdoor games and improves the sportsman qualities. Students are encouraged to participate in tournaments, games, matches and sports organized by other colleges. Our students bag 25 medals every year.
All departments conduct summer,winter & evenig courses respectively.
STUDENT DEVELOPMENT CELLS
PROJECTS CO-CURRICULAR ACTIVITIES
PLACEMENT
Placement & Training Cell
With a view to ensure cent percent placement for the students, this cell arranges appropriate training suitable to the industrial expectation. Our students get placed in reputed industries and companies with handsome salary.
LIST OF COMPANIES where our students have been placed
ABT TATA Motors
AsianPaints, Chennai
Auqasub engineering
AvalonTechnology
Breaks India, Padi
Chemplast, Mettur
Daimles (Benze) Chennai
DMW CNC solutions, Erode
ESSAR Steel, Hazira
Ford India Ltd
HCL, Chennai
Hindustan Mittalenergy Ltd
Larson Toubro, Coimbatore
Lucas TVS
MAC builders
Melss Automation
Micro pack ltd, Bangalore
NASCCO, Mysore
Numeric ups
Om Sai Intex
Sakthi Auto
Spire Tek
Stregtic Automation
Synthite Industries
Tacle Automation, Chennai
Technip, Chennai
Tide, Bangalore
TVS and Sons
URC Ltd
Veesons Energy
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
?
Industry Institute Partnership cell
This cell makes tie ups with various industries to enable students to gain first hand industrial experience through project training and consultancy technology.
Human Resource Development Cell
This cell organizes programmes on personality- development, self-motivation, soft-skills development, building self-confidince & interview skills.
Entrepreneur Development Cell
Entrepreneur Development Cell organizes seminars, lectures & workshops on a variety of topics, with a view to making the students successful entrepreneurs in future.
Women Development Cell
Keeping in mind the betterment of women, eminent personalities are invited for guest lectures. The members of this cell extend their service to the Old Age Homes and Orphanages.
25cation duE in Y e cne llea xcers of E
SILVER JUBLIEE 1984 - 2009
www.kongupolytechnic.ac.in