Post on 23-May-2020
Kaiser. Performance counts.
Multifunctional and powerfulHIGH-PERFORMANCE DRY
AND WET SUCTION UNIT
High-performance vacuumingThe Cerberus is designed to perform heavy-duty vacuum operations and leaves no room for compromise, no matter if used as a dry or wet suction unit or as a suction excavator. The KAISER MORO vacuum system incorporates high- vacuum blowers with an air flow rate ranging from 6000 m3/h to a maximum level of 16500 m3/h at a maximum vacuum of 93%. The tremendous performance of the twin-boost version pushes the limit of suction applications to the performance of a suction excavator. For maximum versatility, dry and wet material can be sucked through separate vacuum lines.
Quietness and easy servicing combined with maximum efficiency To guarantee maximum user comfort and enable deploy-ment of the Cerberus in urban surroundings, the stainless steel cowling is internally panelled with acoustic insulating material to reduce noise emissions. The filter bags are cleaned by means of counter-current compressed air jets. The automatic filter chamber cleaning not only allows easy maintenance but also continuous working.
Multifunctionality The Cerberus can become a multifunctional vehicle thanks to a modular concept that enables the basic range of applications to be extended:> A high-tipping mechanism allows the loaded material
to be discharged at a maximum height of 2350 mm into containers or big bags.
> A fully hydraulic articulated four-segment suction boom/arm with a suction hose diameter of 250 mm can be installed on the rear door of the tank.
> A blow ejector can be fitted to perform blowing operations such as roof gravelling with a max. over-pressure of 1.2 bar.
> A high-pressure water pump makes it possible to carry out even small jetting applications.
The fields of application for the Cerberus are numerous and include, among others, construction sites, oil refin-eries, cement plants, foundries and chemical industries.
DETAILS AT A GLANCE
Soundproof cabinet
Radio remote control
Control panel
Ejector
Suction boom
Excavation arm
Dry suction filters with filter bag lifting system
Cyclone filter for wet suction application
High-performance vacuum blowers
3-axle truck (26 to) 4-axle truck (32 to)
Tank capacity (ltrs) 9000 12000
TECHNICAL SPECIFICATIONS AND EQUIPMENT
Operation and control
> Control panel mounted on the side of the vehicle
> Radio remote control with all relevant operating functions
Vacuum system
> High-vacuum blower with an air flow rate of either 6000 m³/h, 10500 m³/h or 16500 m³/h in the twin-boost version at a max. vacuum of 93%
> Max. overpressure of 1.2 bar available as option
> Liquid material suction plant available as option
> Fully hydraulic suction boom DN 200 or fully hydraulic articulated four-segment excavation arm DN 250
> Blow ejector system for roof gravelling operations and silo loading
Tank structure
> Tank in carbon steel or stainless steel
> Filter chamber in stainless steel
> Tipping system for complete emptying of the tank
> High-lift tilting system for discharging material into big bags and containers available as option
High-pressure water system
> High-pressure pump with a flow rate of 51 ltrs/min and 250 bar or 93 ltrs/min and 200 bar available as option
> Water tank in stainless steel with a capacity of 500 ltrs
> High-pressure hose reel with hydraulic drive for ½” high-pressure hose
Accessories
> Auxiliary air compressor and corresponding tools
> Rotating tube ROTOCRUNCH
8100
2800
THREE POWERFUL FUNCTIONS UNITED IN ONE VEHICLE Multifunctionality
High-tipping system Fully hydraulic four-segment excavation arm
EjectorTwin boost
High-pressure water system Approvals
MODULAR CONCEPT: FROM A DRY SUCTION UNIT TO A MULTIFUNCTIONAL VEHICLE
PEDWet suction
Dry suction
Suction excavation
4010
4201
8 E
NS
ubje
ct to
cha
nge
with
out n
otic
e. T
echn
ical
spe
cific
atio
ns m
ay c
hang
e, d
epen
ding
on
the
chos
en o
ptio
ns a
nd a
cces
sorie
s. A
ll ph
otos
and
dia
gram
s ar
e fo
r illu
stra
tion
only
.
Kaiser. Performance counts.
FOR YOUR APPLICATIONTHE SUITABLE KAISER PRODUCT
RECYCLING VEHICLES
AquaStar
Eco 3.0
EcoCycler
CityCycler
EcoCombi
CityCleaner
Top performance and reliability under the most difficult sewer conditions.
COMBINATION VEHICLES
Elegance 2.0
AquaStar
Combi Eur-Mark
Tornado
BasicLine
Flexibility to handle a wide range of applications.
DRY VACUUM VEHICLES
High-performance vacuuming of dry and wet materials.
ROAD-RAIL EXCAVATOR
S22RR
Perfectly matched to the application of the railway environment.
MOBILE-WALKING EXCAVATOR
Impressive technology to master tough challenges.
WATER TREATMENT VEHICLES
AquaStar WT
Water treatment by means of flocculation.
JETTING AND VACUUM VEHICLES
Tornado
Elegance 2.0
Twister
Special vehicles
Designed to meet the highest performance requirements in the respective field.
Hercules
Cerberus S12 Allroad
S12 4x4
S10
S2
HYDROVACS
CV-Series
Urban X
High productivity with a rugged and reliable technology.
KolDry
OY EUR-MARK ABJakobstadsvägen 3966900 Nykarleby, FinlandT +358 20 73 45 800info@eurmark.fiwww.eurmark.fi
MORO KAISER S.R.L.Via Pontebbana, 1633080 Fiume Veneto (PN), ItalyT +39 0434 951 211infomoro@morokaiser.itwww.morokaiser.it
KAISER AGVorarlbergerstrasse 2209486 Schaanwald, LiechtensteinT +423 377 21 21kaiserag@kaiser.liwww.kaiser.li
KAISER Fahrzeugtechnik GmbH Gewerbestraße 46710 Nenzing, AustriaT +43 5525 641 80mail@kaiser-fahrzeugtechnik.atwww.kaiser-fahrzeugtechnik.at
KAISER Eastern Europe s.r.o.Priemyselná 604/5922 02 Krakovany, SlovakiaT +421 33 7353 500kaiser@kaiser-ee.skwww.kaiser-ee.sk
KAISER PREMIER LLC2550 E. Bijou Ave.Fort Morgan, CO 80701, USAT +1 970 542 1975sales@kaiserpremier.comwww.kaiserpremier.com