Post on 06-Oct-2018
701 135 BA 0103
BedienungsanleitungBedienungsanleitungOperating InstructionsNotice d’utilisationInstrucciones para el manejoInstruções de utilizaçãoIstruzioni d‘usoGebruiksaanwijzingBetjeningsvejledningBruksanvisningBruksanvisningKäyttöohje
Ãδηγίες øειρισµïύ
Kullanım kılavuzu
Industriestaubsauger ISS 35(-S)/ISS 55-SIndustrial vacuum cleaner ISS 35(-S)/ISS 55-SAspirateur industriel ISS 35(-S)/ISS 55-SAspirador industrial ISS 35(-S)/ISS 55-SAspirador industrial ISS 35(-S)/ISS 55-SAspiratori industriali ISS 35(-S)/ISS 55-SIndustriestofzuiger ISS 35(-S)/ISS 55-SIndustristøvsuger ISS 35(-S)/ISS 55-SIndustridammsugare ISS 35(-S)/ISS 55-SIndustristøvsuger ISS 35(-S)/ISS 55-STeollisuuspölynimuri ISS 35(-S)/ISS 55-S
ΒιïµηøανικÞς απïρρïæητήρας ISS 35(-S)/ISS 55-S
Sanayi tipi elektrik süpürgesi ISS 35(-S)/ISS 55-S
ISS 35_55 - Titel/Inhalt Seite 1 Donnerstag, 12. Juli 2001 7:47 07
Würth-Euro • BA 701 135 BA 0103 • OSW
03/01
ISS 35_55 - Buch Seite 3 Donnerstag, 8. März 2001 2:29 14
Würth-Euro • BA 701 135 BA 0103 • OSW
03/01
A B
C
1
2
3
D
E F
ISS 35_55 - Buch Seite 4 Donnerstag, 8. März 2001 2:29 14
Würth-Euro • BA 701 135 BA 0103 • OSW
03/01
G
4
H
5
6
J
4
K
7
8
I
L
ISS 35_55 - Buch Seite 5 Donnerstag, 8. März 2001 2:29 14
11
701 135 BA 0103
Tool Specifications
Industrial vacuum cleaner
ISS 35 ISS 35-S ISS 55-S
Article number 701 135 701 136 701 155Input power 1200 W 1200 W 1200 WDrum capacity Gross 34 l 34 l 55 l Wet 20 l 20 l 44 lAir flow 72 l/s 56 l/s 56 l/sVacuum 178 mbar 235 mbar 235 mbarSurface of the flat pleated filter 0.5 m
2 0.5 m2 0.5 m2
Dimensions (L x W x H) 505 x 370 x 535 mm 505 x 370 x 535 mm 570 x 370 x 860 mmWeight approx. 9.5 kg approx. 9.5 kg approx. 14 kgSafety class / II œ/ I œ/ I
Working safely with this machineis possible only when the operat-ing and safety information areread completely and the instruc-tions contained therein are strictlyfollowed. In addition, the generalsafety instructions in the enclosedbooklet must be followed. Beforeusing for the first time, ask for apractical demonstration.If the mains cable is damaged or cutthrough while working, do nottouch the cable but immediately pullthe mains plug. Never use the ma-chine with a damaged cable.
❏ During vacuuming it is not permitted to ever re-move the flat pleated filter.
❏ The paper filter bag or the membrane filter(special accessories) must be removed whenev-er vacuuming wet dirt.
❏ In the case of non-conductive fluids (e. g. drill-ing emulsions, oils and greases), the unit is notswitched off when the container is full. The filllevel must be regularly checked and the con-tainer emptied before it is too full.
❏ Use only original Würth parts and accesso-ries.
For Your SafetyGB
☞ Use only original Würth parts and accessories
ISS 35_55 - Buch Seite 11 Donnerstag, 8. März 2001 2:29 14
12
701 135 BA 0103
Operating Controls
1 On/Off switch 2 Switch for manual/automatic operation mode 3 Socket for power tool 4 Filter dedusting lever 5 Brush inserts 6 Squeegee inserts 7 Flat pleated filter 8 Exhaust air filter
Not all of the accessories illustrated or described are includedas standard delivery.
Intended Use
The unit is designed for vacuuming dry, non-inflam-mable, health hazardous dust from machines anddevices.For damage caused by usage other then intended,the user is responsible.
Before Use
Check for correct mains voltage: The voltage of thepower source must match the voltage specified onthe nameplate of the machine. Equipment markedwith 230 V can also be connected to 220 V.
Fitting the paper filter bag (Figure A)– Unlock and remove the suction head.– Attach the paper filter bag.– Replace the suction head and lock it in place.
Initial Operation
Switching On and Off (Figure B)– Insert the power plug.– Switch on the machine and start using it.– In manual operation mode the switch 2 (Fig. C)
must be in the upper position.
Dry Vaccuming
Manual modeDuring vacuuming it is not permitted to ever removethe flat pleated filter.A paper filter bag or a diaphragm filter (special ac-cessories) can additionally be used to vacuum finedust.
Automatic mode (ISS 35-S and ISS 55-S)– Plug the electric tool‘s power plug into the vacuum
cleaner ( 3, Figure C).– Switch the unit on ( 1).– The switch 2 must be in the lower position.
☞ The vacuum cleaner is automaticallyswitched on and off with the electric tool.The vacuuming device has a start-up delayof up to 0.5 s and a maximum running downtime of up to 15 s.Electrical tools of 100 - 2200 W can be con-nected to the unit.
– Adapt the connection sleeve to the electric tool'sterminal connection (Figure D).
– Remove the pipe bend from the suction hose(Figure E).
– Mount the connection sleeve to the suction hose.– Connect the connection sleeve to the electric tool
(Figure F).
Filter cleanerYour vacuum cleaner is provided with a new type offilter cleaner – especially effective for fine dust.The flat pleated filter is automatically cleaned (puls-ing sound) by an air blast if you press the remotecontrol at the hand grip for several seconds.
Switching on the filter cleaning system (Figure G)– Slide setting 4 - downwards
Actuate the filter cleaning system in regular in-tervals, both during vacuuming operation andwhen finishing work. The dust-producing pow-er tool/machine is to be switched off during fil-ter dedusting.
The filter cleaning system is continuously active,when operating air and power tools with extremenarrow vac port cross-sections. In this case, switchoff the filter cleaning system and use only for shortperiods, as required.
ISS 35_55 - Buch Seite 12 Donnerstag, 8. März 2001 2:29 14
13
701 135 BA 0103
Wet Vacuuming
Fitting rubber squeegees (Figure H)– Dismantle the strip brush 5.– Fit the rubber 6 squeegees.
☞ The profiled surface of the rubber squeegeesmust be on the outside.
– Remove the paper filter bag.– Lug in the power plug.– Switch on the machine and start using it.ISS 55-S:– Drain dirty water using the drain hose (Figure I).
The flat pleated filter must never be removedwhen vacuuming.The paper filter bag or the membrane filter(special accessories) must be removed whe-never vacuuming wet dirt.In the case of non-conductive fluids (e. g.drilling emulsions, oils and greases), the unitis not switched off when the container is full.The fill level must be regularly checked andthe container emptied before it is too full.
Switching off the filter cleaning system (Figure J)– Setting of the slide 4 - upwards.
☞ When vacuuming wet dirt with the upholstrynozzle or the crevice tool, or when mainlypicking up water from out of a container, itis recommended to switch off the filter clean-ing system.The unit turns itself off automatically whenthe max. liquid level has been reached.Switch the unit off and empty the container.After wet vacuuming, clean and dry the flatpleated filter, the electrodes and the drum.
ISS 35_55 - Buch Seite 13 Donnerstag, 8. März 2001 2:29 14
14
701 135 BA 0103
Trouble Shooting
If a fault occurs (e.g. a torn filter), the unit must be immediately switched off. The fault must be remedied before restarting.The suction turbine does not run – Check the cable, plug, fuse and socket.
– Switch the unit on.The suction turbine switches off – Empty the container.The suction turbine does not restart following emptying of the container
– Switch the unit off and wait for 5 s, switch it onagain after 5 s.
– Clean the electrodes as well as the space betweenthem.
The suction power decreases – Remove possible clog-ups or obstructions from suc-tion nozzle, extension wand, hand grip filter clean-ing system, suction hose or flat pleated filter.
– Replace the paper filter bag.– Dedust the flat pleated filter: Actuate the filter clean-
ing system at the hand grip several times.– Engage the filter cover properly.– Replace the flat pleated filter.
Dust is ejected during vacuuming – Check the proper mounting position of the flatpleated filter.
– Replace the flat pleated filter.Automatic cut-out (wet vacuuming) defective – Clean the electrodes as well as the space between
them.– Constantly check the filling level when working with
an electrical non-conductive fluid.Filter cleaning system switches on and off continuously – Detach the blocked suction nozzle or the end of the
hose.– End continuous vacuuming operation out of a fluid
container, or switch off the filter cleaning system re-spectively (see Chapter “Wet Vacuuming”).
– Remove possible clog-ups or obstructions from suc-tion nozzle, extension wand, hand grip filter clean-ing system, suction hose or flat pleated filter.
– Replace the flat pleated filter.
ISS 35_55 - Buch Seite 14 Donnerstag, 8. März 2001 2:29 14
15
701 135 BA 0103
Maintenance and Cleaning
❏ Before any work on the machine itself, pull themains plug.
Replace the flat pleated filter or the exhaust air filter (Figure K)– Open the filter cover.– Replace the flat pleated filter 7 or the exhaust air
filter 8.– Close the filter cover, it must engage audibly.
Cleaning the electrodes (Figure L)– Unlock and remove the suction head– Clean the electrodes– Replace the suction head and lock it in placeIf the machine should happen to fail despite the caretaken in manufacture and testing, repair should becarried out by an authorized customer servicesagent for Würth power tools.In all correspondence and spare parts orders,please always include the 6-digit order number giv-en on the nameplate of the machine.
Environmental Protection
Recycle raw materials instead of disposing aswasteThe machine, accessories and packaging should besorted for environmental-friendly recycling.
Guarantee
For this Würth machine, we provide a 12-monthguarantee against material and workmanship de-fects from the date of purchase (verified by invoiceor delivery document). Damage that has occurredwill be corrected by replacement or repair.Damage caused by normal wear, overloading orimproper handling is excluded from the guarantee.Claims can only be accepted if the device is sent un-disassembled to a Würth branch office, your Würthsales representative or a customer service agent forWürth power tools.
Noise/Vibration Information
Measured values determined according toEN 60 704-2-1.Typically the A-weighted sound pressure level of thetool is 63 dB (A).
Declaration of Conformity
We declare under our sole responsibility that thisproduct is in conformity with the following standardsor standardization documents: EN 60 335-1, EN 60 335-2-69, EN 55 014-1,EN 55 014-2, EN 61 000-3-2, EN 61 000-3-3 ac-cording to the provisions of the directives98/37/EC, 73/23/EEC (changed by 93/68/EEC),89/336/EEC (changed by 91/263/EEC,92/31/EEC, 93/68/EEC).
01Adolf Würth GmbH & Co. KG
Rolf Bauer ppa. Otto Steck
Subject to change without notice
ISS 35_55 - Buch Seite 15 Donnerstag, 8. März 2001 2:29 14
WÜRTH • 701 135 BA 0103 • ISS 35/55 • 01/03
Niederlassungen:
Aachen
Jülicher Straße 236-24852070 AachenTelefon (02 41) 16 50 47Telefax (02 41) 16 71 79
Aalen
Robert-Bosch-Straße 4773431 AalenTelefon (0 73 61) 4 50 83Telefax (0 73 61) 4 62 55
Augsburg
Flotowstraße 1586368 Gersthofen
Handwerk Metall:
Telefon (08 21) 2 97 61 20Telefax (08 21) 2 97 61 50+51
Bad Mergentheim
Industriepark Würth, Gebäude 197980 Bad MergentheimTelefon (0 79 31) 9 24 05-0Telefax (0 79 31) 92 40 59
Bayreuth
Hasenweg 695448 BayreuthTelefon (09 21) 7 92 05-0Telefax (09 21) 7 92 05 50
Berlin
Spandauer Damm 60-6414059 Berlin-CharlottenburgTelefon (0 30) 32 67 84 30Telefax (0 30) 32 67 83 51
Berlin
Grenzgrabenstraße 413053 Berlin-HohenschönhausenTelefon (0 30) 98 60 01-0Telefax (0 30) 98 60 01 50
Berlin
Symeonstraße 1012279 Berlin-MarienfeldeTelefon (0 30) 72 09 03-0Telefax (0 30) 72 09 03 50
Berlin
OsramhöfeSeestraße/Oudenarderstraße 1613347 Berlin-ReinikendorfTelefon (0 30) 45 08 27 60Telefax (0 30) 45 08 27 53
Biberach
Riss-CenterRiss-Straße 1988400 Biberach(Eröffnung: ca. Sept. 2001)
Bielefeld
Obere Hillegosser Str. 3733699 BielefeldTelefon (05 21) 9 24 18-0Telefax (05 21) 9 24 18 27
Bochum
Harpener Feld 2744805 BochumTelefon (02 34) 95 50 20Telefax (02 34) 3 38 85 51
Böblingen
Hanns-Klemm-Straße 4671034 Böblingen-HulbTelefon (0 70 31) 2 11 76-0Telefax (0 70 31) 2 11 76 50
Brandenburg
Geschwister-Scholl-Str. 3614776 Brandenburg a. d. HavelTelefon (0 33 81) 2 52 20Telefax (0 33 81) 2 52 00
Braunschweig
Hansestraße 6638112 BraunschweigTelefon (05 31) 3 54 78-0Telefax (05 31) 3 54 78-90
Bremen
Gewerbegebiet BayernstraßeStraubinger Straße 1128219 Bremen
Handwerk Metall:
Telefon (04 21) 3 99 88-21Telefax (04 21) 3 99 88 51
Chemnitz
GewerbegebietSüdring/NeefestraßeCarl-Hamel-Straße 509116 ChemnitzTelefon (03 71) 2 71 47-0Telefax (03 71) 2 71 47 50
Cottbus
GewerbegbietAn der ReichsbahnAm Gleis 1503042 Cottbus-SandowTelefon (03 55) 7 56 61-0Telefax (03 55) 7 56 61 50
Crailsheim
Industriegebiet Zur FlügelauRoßfelder Straße 6074564 CrailsheimTelefon (0 79 51) 96 37-0Telefax (0 79 51) 96 37 50
Darmstadt
Weiterstadt ParkBrunnenweg 1964331 WeiterstadtTelefon (0 61 50) 18 18-0Telefax (0 61 50) 18 18 50
Dortmund
Wilhelmstraße 35A59439 HolzwickedeEröffnung: ca. Sept. 2001
Dresden
Malterstraße 3701159 Dresden
Heizung/Sanitär:
Telefon (03 51) 4 14 53-12Telefax (03 51) 4 14 53-50
Düsseldorf
Lierenfelder Straße 5340231 DüsseldorfPostfach 105 53240046 DüsseldorfTelefon (02 11) 9 73 06-0Telefax (02 11) 9 73 06 50
Erfurt
Über dem Feldgarten 1199198 Erfurt-LinderbachTelefon (03 61) 4 20 57-0Telefax (03 61) 4 20 57 50
Essen
Heinz-Bäcker-Straße 1545356 EssenTelefon (02 01) 8 66 45-0Telefax (02 01) 8 66 45 50
Frankfurt
Daimlerstraße 1963110 Rodgau
Handwerk Metall:
Telefon (0 61 06) 84 01-20Telefax (0 61 06) 84 01 51
Frankfurt/Oder
Gewerbegebiet MarkendorfBertha-von-Suttner-Straße 1415236 Frankfurt/OderTelefon (03 35) 5 21 88-0Telefax (03 35) 5 21 88 50
Freiburg
Industriegebiet NordMitscherlichstraße 579108 Freiburg
Handwerk Metall:
Telefon (07 61) 5 59 66 15Telefax (07 61) 5 59 66 50
Gera
Gewerbegebiet Bieblach OstHeinz-Hertz-Straße 1407552 GeraTelefon (03 65) 4 37 28-0Telefax (03 65) 4 37 28 50
Gießen
Gewerbegebiet Gießen-WestRobert-Bosch-Str. 1635398 GießenTelefon (06 41) 9 62 36-0Telefax: (06 41) 9 62 36 50
Göppingen
Industriegebiet OstHeilbronner Straße 1273037 GöppingenTelefon (0 71 61) 6 80 61Telefax (0 71 61) 6 89 00
Goslar
Gewerbegebiet BaßgeigeAlte Heerstraße 1538644 Goslar(Eröffnung: ca. Sept. 2001)
Hamburg
Industriegebiet NettelkrögenGutenbergring 4422848 NorderstedtTelefon (0 40) 53 43 61-0Telefax (0 40) 53 43 61-50
Hannover
Gewerbegebiet GodshornBayernstraße 3730855 Langenhagen-GodshornTelefon (05 11) 7 86 80-0Telefax (05 11) 7 86 80 50
Heilbronn
Dieselstraße 874076 HeilbronnTelefon (0 71 31) 95 56-0Telefax (0 71 31) 95 56 50
Ingolstadt
Eriagstraße 885053 IngolstadtTelefon (08 41) 95 67 78 70Telefax (08 41) 9 31 87 51
Jena
Löbstedter Straße 8007749 JenaTelefon (0 36 41) 45 12-0Telefax (0 36 41) 45 12 50
Karlsruhe
Printzstraße 2a76139 Karlsruhe
Handwerk Metall:
Telefon (07 21) 6 25 22 20Telefax (07 21) 6 25 22 50
Kassel
Industriegeb. Waldau WestOtto-Hahn-Str. 1834123 KasselTelefon (05 61) 9 98 68-0Telefax (05 61) 9 98 68 50
Kempten
Messerschmittstraße 1687437 KemptenTelefon (08 31) 5 74 48-0Telefax (08 31) 5 74 48 50
Kiel
Seekoppelweg 7a24113 KielTelefon (04 31) 6 47 40-0Telefax (04 31) 6 47 40 50
Koblenz
Auf dem Hahnenberg 5156218 Mülheim-KärlichTelefon (0 26 30) 94 70-0Telefax (0 26 30) 94 70 50
Köln
Köhlstraße 4350827 Köln-OssendorfTelefon (02 21) 95 64 42-0Telefax (02 21) 95 64 42 50(08 00) 8 65 13 90
Künzelsau-Gaisbach
VerkaufsniederlassungSchliffenstraße 2274653 GaisbachTelefon (0 79 40) 15 25 55Telefax (0 79 40) 15 45 55
Leipzig
Zum Bahnhof 2004178 Leipzig/RückmarsdorfTelefon (03 41) 4 90 14-0Telefax (03 41) 4 90 14 40
Würth Service-Container
Am Airport 2000Postfach 12 4404029 LeipzigTelefon (03 41) 2 24 19 76Telefax (03 41) 2 24 19 77Funk (01 70) 6 33 70 73
Leonberg
Hertichstraße 1071229 Leonberg-EltingenTelefon (0 71 52) 9 28 24-0Telefax (0 71 52) 9 28 24 29
Ludwigsburg
Mörikestraße 28/171636 LudwigsburgTelefon (0 71 41) 56 46 10Telefax (0 71 41) 56 46 99
Lübeck
Taschenmacherstraße 1023556 Lübeck(Roggenhorst-Nord)Telefon (04 51) 8 71 92-0Telefax (04 51) 8 71 92 50
Magdeburg
Silberbergweg 2939128 MagdeburgTelefon (03 91) 2 55 87-0Telefax (03 91) 2 55 87 50
Mannheim
Fraunhoferstraße 768309 MannheimTelefon (06 21) 7 27 46-0Telefax (06 21) 7 27 46 50
Minden
Ringstraße 49-5132427 Minden(Eröffnung: ca. Sept. 2001)
Mönchengladbach
Gewerbegebiet EngelbleckBorsigstraße 1341066 MöchengladbachTelefon (0 21 61) 4 77 69-0Telefax (0 21 61) 4 77 69 50(08 00) 7 24 16 70
München
Am Lenzenfleck 285737 Ismaning
Handwerk Metall:
Telefon (0 89) 96 07 03 30Telefax (0 89) 96 07 03 50
München 2
Ridlerstraße 6580339 MünchenTelefon (0 89) 43 19 72-0Telefax (0 89) 43 19 72 50
Münster
Harkortstraße 1148163 MünsterTelefon (02 51) 71 20 91Telefax (02 51) 71 76 31
Neubrandenburg
Gerstenstraße 217034 NeubrandenburgTelefon (03 95) 4 30 48-0Telefax (03 95) 4 30 48 50
Nordhausen
Freiherr-vom-Stein-Straße 30c99734 NordhausenTelefon (0 36 31) 4 78 93-0Telefax (0 36 31) 47 89 50
Nürnberg
Lenkersheimer Straße 1690431 Nürnberg
Handwerk Metall:
Telefon (09 11) 9 31 92-20Telefax (09 11) 9 31 92-50
Offenburg
Robert-Bosch-Straße 277656 Offenburg-ElgersweierTelefon (07 81) 9 69 84-0Telefax (07 81) 9 69 84 50
Oldenburg
Ammerländer Heerstaße 24626129 OldenburgTelefon (04 41) 7 20 16Telefax (04 41) 77 74 61
Olpe
Industriegebiet Auf der MarkGlück-Auf-Weg 357482 Wenden-GerlingenTelefon (0 27 62) 9 87 98 90Telefax (0 27 62) 98 94 56
Osnabrück
Hettlicher Masch 1249084 OsnabrückTelefon (05 41) 9 09 01-0Telefax (05 41) 9 09 01 50
Paderborn
Frankfurter Weg 70-733106 Paderborn(Eröffnung ca. Nov. 2001)
Passau
Regensburger Straße 1494036 PassauTelefon (08 51) 9 56 62-0Telefax (08 51) 9 56 62 50
Pforzheim
GewerbegebietWilferdinger HöheRastatter Straße 3675179 PforzheimTelefon (0 72 31) 56 86 80Telefax (0 72 31) 56 87 99
Potsdam
Am Verkehrshof 114478 PotsdamTelefon (03 31) 8 88 84-0Telefax (03 31) 8 88 84 50
Regensburg
Franz-Hartl-Straße 493053 Regensburg
Handwerk Metall:
Telefon (09 41) 7 83 98 30Telefax (09 41) 7 83 98 50
Reutlingen
Industriegebiet WestFerdinand-Lasalle-Straße 5572770 Reutlingen
Handwerk Metall:
Telefon (0 71 21) 56 95 20Telefax (0 71 21) 56 95 50
Rodgau
siehe bei Frankfurt/Main
Rostock
GewerbegebietNeu-Roggentiner Straße 418184 RoggentinTelefon (03 82 04) 6 16-0Telefax (03 82 04) 6 16 50
Saarbrücken
Im Rotfeld 2166115 Saarbrücken
Handwerk Holz/Bau:
Telefon (06 81) 9 48 65-10Telefax (06 81) 9 48 65-50
Schwäbisch Hall
Industriegebiet Hessental-OstSchmollerstraße 4174523 Schwäbisch HallTelefon (07 91) 4 07 23-0Telefax (06 91) 4 07 23 50
Schwerin
Robert-Stock-Straße 619061 SchwerinTelefon (03 85) 6 46 71-0Telefax (03 85) 6 46 71 50
Siegen
(Kaan-Marienborn)Hauptstraße 8457074 Siegen
Handwerk Metall:
Telefon (02 71) 6 60 49 80Telefax (02 71) 6 60 49 20
Sinsheim
In der Au 2274889 Sinsheim(Eröffnung ca. Nov. 2001)
Stuttgart
Kölner Straße 10Hallschlag70376 Stuttgart
Handwerk Metall:
Telefon (07 11) 9 55 73 20Telefax (07 11) 9 55 73 50
Trier
Ohmstraße 954292 Trier(Eröffnung: ca. Sept. 2001)
Ulm/Neu-Ulm
Carl-Zeiss-Straße 389231 Neu-UlmTelefon (07 31) 9 78 98-0Telefax (07 31) 9 78 98 50
Urbach
Schorndorfer Straße 2273660 UrbachTelefon (0 71 81) 4 88 66-0Telefax (0 71 81) 48 86 56
Villingen-Schwenningen
Industriegebiet VockenhausenHeinrich-Hertz-Straße 978052 VS-VillingenTelefon (0 77 21) 87 19-0Telefax (0 77 21) 87 19 50
Weingarten/Ravensburg
Hähnlehofstraße 588250 WeingartenTelefon (07 51) 55 11 01Telefax (07 51) 55 15 03
Wiesbaden
Hagenauer Straße 17-1965203 Wiesbaden
Handwerk Metall:
Telefon (06 11) 1 86 97 20Telefax (06 11) 1 86 97 50
Wuppertal
IndustriegebietNächstebreckMöddinghofe 2142279 Wuppertal
Holz/Bau:
Telefon (02 02) 6 47 71-11Telefax (02 02) 6 47 71 25
Würzburg
Gewerbegebiet OstSandäcker 1197076 WürzburgTelefon (09 31) 2 79 89-0Telefax (09 31) 2 79 89 18
Adolf Würth GmbH & Co. KG
Postfach
·
74650 Künzelsau
·
Telefon (0 79 40) 15-0
·
Telefax (0 79 40) 15 10 00Internet: http://www.wuerth.com
·
e-mail: info@wuerth.com
701 1
35
BA
0103
- Pr
inte
d in
Ger
man
y - I
mpr
imé
en A
llem
agne
MW
V-O
SW-0
1/03
• ©
by
Ado
lf W
ürth
& C
o. K
G •
Nac
hdru
ck, a
uch
ausz
ugsw
eise
, nur
mit
Gen
ehm
igun
g.
Würth-Niederl. hoch 01/06 Seite 2 Donnerstag, 12. Juli 2001 7:48 07