Post on 07-Apr-2018
8/3/2019 IP User Manual
1/35
User Manual
V1.6
IP Camera
Model:
In the use of this product, please carefully read this user manual, user manual,
please keep a proper record of
1
8/3/2019 IP User Manual
2/35
Description
Dear users, please use this product before reading this instruction manual carefully, in the
course if you read the technical details of some description is unclear or ambiguous, such as
printing causes the product you use to operate in accordance with the instructions after can not
solve the problem, please call our hotline to consult the company's technology solutions. Due to
product version upgrades or other reasons, the contents of this manual will be updated from time
to time without notice to you please understand the inconvenience.
Standard preparation and packing list
Please user after receipt of this product carefully check the following list of defects, if
requested in time with the company or dealer.
1. a network camera
2. DC12V / 2A power adapter a
3. a CD-ROM
4. a certificate
5. a warranty card
2
8/3/2019 IP User Manual
3/35
ContentsProduct Overview
Features
Technical parameters
Notes
Appearance and interface
5.1Presentation Description
5.2The main interface
Connection Method
Software landing
8.1Landing equipment
8.2Page description
8.3Note the main interface
System Settings
9.1Basic information
9.2User Management
9.3Serial port settings9.4Front-end recording
9.5Clock settings
9.6System Status
Audio Video
10.1Video Channel
10.2Video parameters
10.3Image settings
10.4Audio settings
Network Settings
11.1Ethernet
11.2Wifi
11.3PPPoE
11.4DDNS Settings
11.5Port the preparation of
3
8/3/2019 IP User Manual
4/35
Alarm settings
12.1Alarm input
12.2Motion Detection
12.3Video lost
12.4Linkage Set
12.5Alarm linkage
Local settings
Appendix Frequently Asked Questions
Cable connection and installation of alarm diagram
4
8/3/2019 IP User Manual
5/35
Product Overview
Welcome to the purchase of Network Camera product, the company's network of cameras
using the latest scientific research and the most advanced production technology, generous body
compact, easy to install, with full-featured, stable performance, image quality and features such
as adjustable bit-rate flexibility, safe products in the urban construction, intelligent building,
bank security, urban roads, airports, stations, places such as monitoring a wide range of
applications.
Features
1.the standard MPEG-4 video compression format
2. support D1, CIF, QCif three types of video formats
3. built-in Web Server, full support IE browser monitor, configuration and management,
operation simple, convenient
4. dynamic rate control to ensure the Internet's audio and video real-time transmission
5. in support of two-way voice intercom
6. support alarm input and output
7. support for Motion Detection
8. support the video block (or higher SONY480 required)
9. support for image capture
10. to support the adjustment of image parameters
Technical parameters
Item Parameters of thecontent
Video Access Cable Access
Video standard NTSC or PAL format support
Encoding MPEG4
5
8/3/2019 IP User Manual
6/35
Frame rate PAL :10 - 25 f/sec, NTSC :10 - 30 f/sec
Image Adjustment Brightness, contrast, chroma, saturation, image quality level adjustment
Video resolution PAL 720*576 pixel @ D1 352*288 pixel @ CIFNTSC720*480 pixel @ D1 352*240 pixel @ CIF
Stream type Video stream (dual stream: D1 + CIF), audio stream
Motion Detection Regional and sensitivity can be setBit-rate videocompression
128Kbit/s4Mbit/s
Delay screen Less than 200 millisecond (LAN)
Audio Intercom voiceinput
1 Road, MIC interface, linear input
Audio Output 1 Road, RCA interface, linear output
Network Network Interface RJ-45 10/100M
Network type Ethernet, 802.11b / g network, WAN (router / modem reprovision)
Network protocol RTSP/RTP/DHCP/MUDP/NTP/SMTP/UPNP
Alarm PPPoE PPPoETrigger conditions Video Motion Detection / Video Loss Action
Motion Detection Sensitivity 1100Linkage alarmVideo lost Sensitivity 1100Linkage alarmAlarm input 1 way switch input
Alarm output 2-way switch output
Work temperature 35 + 65 Humidity 90%RH
Voltage DC12V /2A
Power 10.5W
Notes
1. the product during transport, please do not drop, vibration and other severe damage to the
product;
2. the network camera installation environment: environmental drying ventilation, do not install
in a damp environment, so as not to shorten the service life;
3. set the machine fixed in a safe place to avoid falling damage;
4. not to wire and cable easily be placed in the local people to touch in order to avoid poor
contact caused by signal transmission lines destabilizing effects of video quality;
5. clean the machine when you power. Do not allow cleaning chemicals and aerosols can only be
used to clean dry cloth.
6. Do not be any foreign body or fluid material to infiltrate into the internal machinery to avoid
damage to the machine.
6
8/3/2019 IP User Manual
7/35
7. when an internal failure of the machine, the user not to repair, should be our technical staff or
by our authorized repair maintenance personnel, if the user to repair all the consequences and
the loss of personal commitment by the user, and the Company has nothing to do.
Appearance and interface
5.1Presentation Description
Product Name: Gun-type Network Camera
Product Model:
Product appearance
Figure 5-1 positive map
5.2 Interface
The products are mainly in the back-end interface, as shown below and note the location of
interface
7
8/3/2019 IP User Manual
8/35
Figure 5-3 Rear Panel Figure
power DC12V/2A
Audio Output RCA interface, linear output
Audio input RCA interface, linear input
RS485/ALARM RS485 PTZ control and alarm input and output interfaces
USB USB interface to provide front-end video memory
Initial System reset button
Network Interface 10/100M adaptive Ethernet Interface
Auto Iris Standard auto iris lens socket 4Pin
Connection Method
7.1Direct Connect Mode
Directly to the camera and computer network with network cable connected to a
8
8/3/2019 IP User Manual
9/35
standard Ethernet cable and monitor the video server to connect to the host.
7.2Network connection mode
Figure 7-1 Schematic diagram of network connections
As shown, the video server to connect to the INTERNET network switches, in the center of the
host monitor IE browser to visit
Sign software
8.1Landing equipment
First of all, the computer IP address and the equipment is set to the same network segment
IP address. If the device IP address is 192.168.1.217, gateway 192.168.1.1. IP address of the
computer is more variable: 192.168.1.XX. Gateway 192.168.1.1
Open the IE browser, enter in the address bar of your video server's default IP address, or
the domain name in the opening function of the visit through the domain name, enter the domain
names, landing shows the dialog box, as shown.
9
8/3/2019 IP User Manual
10/35
User equipment, such as the address of uncertainty, you can run electronic equipment video
server software search, NVS-related operations the client can see the user manual.
Figure 8-1 Landing Interface
The initial state of the default address: 192.168.1.217.
User name: admin
Password: admin
Note: any user using the default user name and password after landing with the operation of
all operating authority, it is recommended the first time users to change my
password after a successful landing, in order to ensure system security.
first-time users need to install OCX controls, click on the image above:
To download and install. Otherwise, enter the following, will be
connected to see the video.
8.2Page description
After landing, access to equipment for IE first, as follows:
10
8/3/2019 IP User Manual
11/35
Figure 8-2 page
8.3Note the main interface
8.3.1Toolbar Help
Figure 8-3 Toolbar
Disconnect / connect devices
Drawings, pictures in the form of photos stored in the local PC
11
8/3/2019 IP User Manual
12/35
By the current video image to play sound stored in the PC
Video file playback.
User and control real-time voice intercom.
Sound on / off
Out of the current page.
8.3.2Video formats
Figure 8-4 Video format
Users can choose different needs of different video format.
8.3.3PTZ control
Figure 8-5 PTZ control
PTZ to normal control, we must first set up the parameters Yuntai detail settings please
refer to serial port settings.
12
8/3/2019 IP User Manual
13/35
Upon completion of parameter setting, you can control the PTZ. Including aperture +
(aperture -), Focus + (Focus -), Zoom + (zoom -) as well as up and down for about such
operations, the user can also drag the slide to adjust the standard rotational speed PTZ.
8.3.4Preset digital settingsUser by setting the preset, and can be easily scheduled to make the location of PTZ.
Click on the "pre-position" as shown below.
Figure 8-6 Setting preset position
Add a preset position, the user input and presets preset heading site, click on "Add"
prompted "to add the success of pre-digital."
Delete preset position, the user choose to delete the preset position, click on "delete" prompted
"Delete success of pre-digital."
Call the preset position, it is necessary to call a preset position, first of all choose to call
home, and click on the "call"
PTZ preset automatically to call at a location which, at the same time prompted to "pre-digital
call success."
8.3.5
Set guard bit
Figure 8-7 guard-bit set
13
8/3/2019 IP User Manual
14/35
First of all, select "Enable guard-bit function", select the guard bit and idle time settings, click on
"settings" option.
System Settings
9.1Basic information
Basic information indicating that the current system information, users can restart the
implementation of the software to restore the factory default values and restart the operation of
equipment. As shown below.
Figure 9-1 Basic Information
System Information: Displays the current device name, device ID, core version, service version,
web version and the plug-in version.
Automatic restart: Users can set the device to restart every time, methods of operation, first
check the "Enable" then set the interval to restart, you can save.
Upgrade: the user can upgrade the software and maintain the software for the latest version.
First of all choose the path where the upgrade file, click on the "upgrade."
Note: In the process of upgrading, please do not power down and carry out any operation of the
software in order to avoid escalation of system failure or damage.
14
8/3/2019 IP User Manual
15/35
8/3/2019 IP User Manual
16/35
9.3Serial port settings
User by setting the serial port parameters, you can control serial devices by then.
Figure 9-3 Serial Port Settings
Serial port access by users to choose the type of device supported by device baud rate, data
bits, stop bits, parity bit, an agreement the name and address of the ball machine. Can be set
up after the completion of preservation.
9.4. front-end recording
9.4.1. time deployment
Users can set the front-end deployment time automatic video recordingtime.
16
8/3/2019 IP User Manual
17/35
Figure 9-4 Recording Front End
9.4.2. video management
Users can set the reserved disk space, insufficient disk space when the video strategy,
stop the video, or delete the oldest video file.
Set the maximum file length, set the front of the video files the maximum length (1-60
minutes) and documentation strategy, and switch to stop the video file.
Set alarm video length, set up automatically when the alarm occurred in the video a long
time.
9.4.3. disk status
Front-end storage devices access basic information on the disk status is displayed, the
above set of parameters after the completion of
Click the "Start Video" video status shown as "Manual Video" To stop the video, click "Stop
Video"
In the course of the video, you can choose "automatic refresh" the system will select the
refresh time in accordance with the following disk status information
automatically refreshes.
17
8/3/2019 IP User Manual
18/35
9.5. the clock setting
The user can choose the date and time zone.
Figure 9-5 set-up time
Time zone settings: Select the local time zone, select it click "Save."
Date set: Date set to choose machines with PC synchronization, set up after the click Save to
Network clock settings: check the "automatically synchronize with the INTERNET clock
server", select the server name after the save, the system automatically with the
selected clock server to keep pace INTERNET.
9. 6. the system state
System Status displays the current status of video and audio.
Figure 9-6 System Status
Choose to refresh every time, or check the automatic brush, the system can automatically refresh
the status of audio and video
18
8/3/2019 IP User Manual
19/35
Audio Video
10.1Video Channel
Choice of audio and video into the video channel page. As shown below.
Figure 10-1 Video Channel
Different network types, the user can choose a different video channel. If the user is
connected through the LAN network camera, the user can choose "applicable to the LAN."
First, open the D1 switch, and then choose the quality of the network frame rate preset
stream. Set rate control type, encoding and video formats, such as model parameters.
Upon completion of parameter settings can be saved.
19
8/3/2019 IP User Manual
20/35
10.2Video parameters
Set shows the subtitles in the video content, including: name, time, bit-rate settings
Figure 10-2 video parameters
Users choose to display subtitles, you can set up after the completion of preservation.
10.3Image settings
Users can adjust the video brightness, contrast, color saturation and to enable the display of
images to achieve the best results. To restore the default parameters, click on the "default value"
good parameter settings can be saved.
20
8/3/2019 IP User Manual
21/35
Figure 10-3 Image settings
10.4Audio settings
Users can adjust according to the actual audio input and audio output volume size. As shown
below.
21
8/3/2019 IP User Manual
22/35
Figure 10-4 audio settings
Settings are finished, click the "Save" button, to restore the ex-factory value, select the
"default value."
Network Settings11.1Ethernet
Through the Ethernet settings, the user can carry out the relevant parameters for the
Ethernet settings. As shown.
Figure 11-1 Ethernet
22
8/3/2019 IP User Manual
23/35
Users can set up the network according to the actual situation parameters can be set
up after the completion of preservation.
DHCPC settings: You can turn this option, automatically access the network from
the local network parameters, the content needs to support DHCP Server, please contact
the network administrator to confirm.
11.2Wifi
wireless network adapter settings: the need for local networks to support wireless network
The following chart, open the "wireless network switch", the configuration parameters of
the local wireless network.
Figure 11-2 Wifi
Note:
set up a wireless network adapter, the Ethernet card to change the IP address, Ethernet
address after Kai will automatically become the same with the wireless card.
If the Ethernet card and wireless card at the same time, equipment, wireless card preferred
23
8/3/2019 IP User Manual
24/35
11.3 PPPoE
Need to set up automatic PPPoE dial-up, the first switch should open, select the card type,
network operators fill the account number and password, click Save to
Figure 11-3 PPPoE
11.4 DDNS settings
Need to set up dynamic DNS, the first switch should be open.
Select DDNS service providers, 3322. ORG, enter the DDNS username and password, DDNS
address parameters can be saved. As shown.
Figure 11-4 DDNS settings
24
8/3/2019 IP User Manual
25/35
11.5 port preparation
Select Network Settings, enter the web portal page, as shown below.
Figure 11-5 Port the preparation
WEB Port: equipment for the landing page of the IE port.
FTP port: FTP uploading and downloading for the port.
RTSP port: port real-time streaming for video streaming.
Intercom port: the port used to talk.
Upgrade port: the port used for the upgrade process.
UPNP switch: Plug and Play switch.
25
8/3/2019 IP User Manual
26/35
Alarm settings
12.1Alarm input
Select "Alarm Settings" to enter the "alarm type" page, as shown.
Figure 12-1 Alarm input
First of all, users choose to enter the police, set up the deployment time, the parameters can be
saved.
26
8/3/2019 IP User Manual
27/35
12.2Motion Detection
Select "Alarm settings" and enter "mobile detection" page. As shown.
Figure 12-2 Motion Detection
To detect movement, we must first start the "mobile detection" feature. And then set up
mobile detection sensitivity (1-100, the value of the larger, higher sensitivity)
Mobile detection time. Upon completion of the preservation can be.
27
8/3/2019 IP User Manual
28/35
12.3Video lost
Select "Alarm settings" and enter "video loss" page. As shown.
Figure 12-3 loss video
First of all, check "Enable video loss alarm," the loss of sensitivity of the video settings (1-100,
the value of the larger, higher sensitivity)
Set video loss time. Upon completion of the preservation can be.
28
8/3/2019 IP User Manual
29/35
12.4Linkage Set
Select "Alarm settings" and enter "linkage settings" page. As shown.
Figure 12-4 linkage set
12.4.1 Parameter Alarm Center
First of all alarm users to set up the Center address, port and alarm centers. Can be set up after
the completion of preservation.
12.4.2, the message parameters
First of all, set up mail server user name, e-mail type, enter the user name and password. Can
be set up after the completion of preservation.
12.4.3, alarm output parameters
First of all, users choose a state of alarm output and alarm output level, set the alarm level to
maintain the time. Can be set up after the completion of preservation.
12.4.4, FTP client parameters
Users first enter FTP server name, user name and password, FTP path and select FTP upload
(download) the type, can be set up after the completion of preservation.
29
8/3/2019 IP User Manual
30/35
12.5Alarm linkage
Select "Alarm settings" and enter "alarm linkage" page. As shown.
Figure 12-5 linkage alarm
12.5.1, alarm input linkage
First of all alarm users to select input channel, set the alarm time and alarm linkage every
option, including the police call center, mail, alarm output 0, alarm output 1, the front-end video,
FTP upload and play a sound.
12.5.2, the mobile to detect linkage
First of all mobile users to detect the alarm every time.
Then select the Linkage option, including the police call center, mail, alarm output 0, alarm
output 1, the front-end video, FTP upload and play a sound.
11.5.3, video missing linkage
First of all user settings every time the video loss alarm.
Then select the Linkage option, including the police call center, mail, alarm output 0, alarm
output 1, to play a sound.
30
8/3/2019 IP User Manual
31/35
Local settings
Select "Local Settings", enter the local settings page.
Figure 13-1 local settings
Video memory settings: first set the maximum length of video file, and then select the video file
storage directory.
Alarm linkage video: First check the "alarm linkage Video", and then set the alarm the length of
the video file.
Finish to save your settings.
31
8/3/2019 IP User Manual
32/35
Frequently Asked Questions
1. can not access the network through the browser, camera
Possible reasons: network problems
Solution: 1) to confirm the network trouble-free
2) to confirm that the IP network camera's IP address and the computer to Sites in the
same network segment, and the IP network without conflict.
2. no image display connected
Possible reasons for this: Active control is not installed
Solution: in the land interface to download and install the Active Control
3. external PTZ control
Possible reasons: to connect the signal line is incorrect or bad.
Solution: re-connect to ensure that the wiring connection is correct and good contacts.
Possible causes: Yuntai agreement, baud rate and address settings are not correct
Solution: in order to enter the System Settings / Serial Port settings, setting the correct Yuntai
agreement, baud rate, address and other parameters.
4. play video files with sound without images
Possible reasons: There is no universal DIVX decoder installed
Solution: download and install General DIVX decoder.
5. forget the device IP address
Solution: 1) search software search equipment IP Address
2) Press the INITIAL key system parameters will be restored to factory default values
32
8/3/2019 IP User Manual
33/35
Appendix: Cable connection and installation of alarm diagram
Bolt with the way the network input, output cable all the way the police function, the
installation of alarm control line connection in accordance with the following diagram. When
the alarm probe to identify that the alarm signal, you can start the corresponding wired alarmfunction and alarm output to trigger an alarm signal cooked:
Note:
1. Alarm switch input must be a type of input signal, any other type of input signal (eg,
voltage signal, etc.) may damage the product.
2. If wired alarm function activated, alarm input probe 2.2K resistor must be received,
otherwise the system would be considered to be alarm signal input and alarm functions will be
action.
6.1 serial alarm input (normally closed switch-type) connection diagram
33
8/3/2019 IP User Manual
34/35
6.2 Parallel alarm input (normally open switch type) connection diagram
34
8/3/2019 IP User Manual
35/35
6.3 Alarm output connection diagram