Introduction to Chromasun MCT

Post on 23-Jan-2017

245 views 1 download

Transcript of Introduction to Chromasun MCT

Chromasun Micro-Concentrator

Andrew Tanner PAGE 2

What is Solar Thermal?

Andrew Tanner PAGE 3

Solar Hot Water Heating

• Solar Hot Water heating

uses the heat of the sun

to generate hot water

• Flat panels like the ones

shown to the right can

efficiently generate

temperatures of 120F

but beyond that they

lose efficiency rapidly

Andrew Tanner PAGE 4

What is Concentrating

Solar Thermal?

Andrew Tanner PAGE 5

Concentrating Solar Thermal

• Concentrating solar

thermal uses reflectors

to actively track the sun

and concentrate the heat

onto an absorber pipe

• The reduced surface

area of the absorber

pipe means that these

types of collectors are

still efficient at

temperatures over 200F

Andrew Tanner PAGE 6

Why Chromasun?

Andrew Tanner PAGE 7

Solar Experience

• Peter Le Lievre (CEO) and Andrew Tanner (VP of Engineering) were founding engineers at Ausra, now

Areva Renewables. Between 2002 and 2008 built Australia’s largest solar thermal power plant and designed

Germany’s largest. They have applied this knowledge to design and build the Chromasun MCT.

Andrew Tanner PAGE 8

2008 Chromasun Formed

Objective: miniaturize the

known linear Fresnel optic

that they pioneered with

Ausra and make it into a

building friendly product

200X Reduction in size!

Andrew Tanner PAGE 9

MCT Exploded View

Receiver Pipe (SS 304 A213 Tube)

Parallel Mirrors

The MCT is fixed on the rooftop like a regular panel however

20 parallel mirrors internally track the sun to provide 20X

concentration onto a stainless steel receiver pipe

MCT Tracking Video

Andrew Tanner PAGE 10

Best in Class Solar Collector

Highest

temperature rated

solar collector in

the USA

(179ºC /354ºF)

Andrew Tanner PAGE 11

Why is the MCT the superior concentrator?

• Easy to install

• Closed loop plug-and-play

approach to tracking

• No external moving parts

• Reduced wind-loadings

• Reduced roof loadings (<5lb/sqft)

• Aesthetically stunning

• Easy to clean

• External tracking mechanisms

• Dependent on algorithms to track

• Reflective surface is prone to

abrasive damage over time

• Catches the dirt and hard to clean

• Lower roof packing density due to

shading

• Complex roof loadings

vs

Andrew Tanner PAGE 12

How does the MCT install?

Andrew Tanner PAGE 13

Chromasun MCT – Simple Installation

MCT is self-supporting and has an integrated stand that has seismic and

structural sign-off to hurricane loadings

Andrew Tanner PAGE 14

Chromasun MCT – Simple Installation

The picking points and integrated racking makes installation on the rooftop

simple and efficient.

MCT Installation Video

Andrew Tanner PAGE 16

Where have they deployed

the technology before?

Andrew Tanner PAGE 17

Santa Clara University Showcase Project

Andrew Tanner PAGE 18

Santa Clara University Showcase Project

Andrew Tanner PAGE 19

SCU Benson System Schematic

Simple plate exchanger

takes the 200F heat from

the MCT’s and delivers it to

the building loop

Andrew Tanner PAGE 20

SCU Solar Monitoring

Solar Monitoring Equipment was installed so that output could be modeled

Andrew Tanner PAGE 21

SCU BTU Energy Metering

BTU Metering was installed so that output could be measured

Andrew Tanner PAGE 22

SCU Performance

• Monitoring equipment enables

comparison of metered data with

modeled data

• For this project measured and

modeled have aligned perfectly!

Andrew Tanner PAGE 23

What if I have a steam

requirement?

Andrew Tanner PAGE 24

Industrial Process Heat Applications

Andrew Tanner PAGE 25

Solution for baseload

cooling?

Andrew Tanner PAGE 26

Cooling with MCT’s and a Double Effect Absorption Chiller

HHW

MCT Panels

DE Multi-Fire Absorption Chiller Cool Building

Sunlight

Heat Rejection

1.35 @ 7ºC / 44ºF

2.35 @ 30ºC / 85ºF

1 @ 175ºC / 350ºF and/or Natural Gas

CHW CW

Andrew Tanner PAGE 27

Roof Area Utilization

An MCT array in conjunction with a two-stage absorption

chiller is best in class for rooftop area utilization

Andrew Tanner PAGE 28

Solution for baseload

domestic hot water

&cooling?

Andrew Tanner PAGE 29

Solar Heating & Cooling with MCT Panels

The MCT’s unique ability to efficiently deliver thermal energy over 200F

makes it ideal for integration with absorption chillers / heat pumps

1.6 times as

much heat out!!

Andrew Tanner PAGE 30

Solar Heat & Cooling System Configuration

• This “Solar Cooling” design gets the Federal 30% rebate (including the aux boiler!)

• CSI State Rebate on Solar and Energy Efficiency rebate on the boiler skid

• Chromasun can finance the entire system and attain a payback through both solar

and the 150% efficient boiler

Andrew Tanner PAGE 31

Example Chiller at Poultry Farm in CA

Compact Skid!

Andrew Tanner PAGE 32

Rooftop solar energy yields for the building

0

50

100

150

200

250

300

350

400

Flat Plate DHW Flat Plate CHW PhotovoltaicCHW

MCT CHW MCT DHW +CHW

BT

U/s

qu

are

feet

roo

f are

a

Solar technology type

CHW

DHW

Best building

energy outcome!

The Chromasun MCT with the heat pump therefore delivers more energy for

a rooftop area than any other solar technology

Andrew Tanner PAGE 33

What if I have a high

latent/dehumidification load?

Andrew Tanner PAGE 34

Traditional Cooling Tem

p

“Summer” Boiler

Humidity removal by condensation

44ºF/

7ºC

65ºF/

18ºC

“cause that’s how we’ve always done it”

Over-chilling by

electrical vapor

compression

SENSIBLE

+ LATENT

Andrew Tanner PAGE 35

Latent Heat Removal with Desiccants Tem

p

Humidity removal by

desiccant (solid or liquid) that

can then be regenerated by

solar thermal

65ºF/

18ºC

Significantly reduced net

chilling by electrical

vapor compression and

no lover over-chilling

LATENT

SENSIBLE

Solar

regenerates the

desiccant

Andrew Tanner PAGE 36

How are these projects

financed?

Andrew Tanner PAGE 37

2011 – The year for Solar Thermal!!

• In 2011, the following incentives are available to offset the cost

– 30% Federal Investment Tax Credit as a GRANT

– 100% Bonus Depreciation at the end of Year 1 WORTH 30%

– California Solar Initiative Thermal Rebate is at Tier 1 and WORTH APPROX

20%

• In 2012, the incentives reduce to the following

– 30% Federal Investment Tax Credit as a TAX CREDIT

– 50% Bonus Depreciation at the end of Year 1 WORTH 15%

– California Solar Initiative Thermal Rebate will likely drop to Tier 2 and

WORTH APPROX 10%

Andrew Tanner PAGE 38

Project Financing

$-

$0.20

$0.40

$0.60

$0.80

$1.00

$1.20

$1.40

$1.60

$1.80

Feb-1

982

Ap

r-1

98

4

Ju

l-1

98

6

Se

p-1

98

8

No

v-1

99

0

Ja

n-1

99

3

Ap

r-1

99

5

Ju

n-1

99

7

Au

g-1

99

9

No

v-2

00

1

Ja

n-2

00

4

Mar-

2006

Ju

n-2

00

8

Au

g-2

01

0

Oct-

201

2

$/t

herm

Historical Natural Gas Price

9.5%

?

• Chromasun is able to fully

finance projects as: – Finance Lease

– Thermal Power Purchasing Agreement

• Finance Lease – Fixed Monthly Rate

– Performance Guarantees

• Thermal PPA – Thermal Energy is metered and

charged to the customer at a rate

below what it costs to produce it from

gas (nominally 10%). I.e. Always

saving!

– 10, 15 or 20yr terms

– O&M remains responsibility of

Chromasun

Andrew Tanner PAGE 39

Where do they

manufacture?

Andrew Tanner PAGE 40

Chromasun 10MW / Annum San Jose facility

Chromasun MCT are made

in the USA

Andrew Tanner PAGE 41

MCT Summary

• Chromasun MCT is based on existing CSP technology and over a decade

of experience in large-scale solar

• Highest Temperature rated SRCC collector in the US

• Concentrating the sun’s energy enables the MCT to consistently deliver up

to 220ºC (440ºF) on the rooftop

• MCT has no externally moving parts, reducing O&M

• Unlike other concentrating technologies, cleaning is limited to flat glass

(automated cleaning system in development)

• MCT can be turned on a off which provides safe operation

• MCT is a durable, industrial grade product with sturdy installation method

• The delivery of higher grade heat enables compatibility with absorption

chillers and thermally driven heat pumps

• Project financing available through Chromasun

THANK YOU

Andrew Tanner

+1 650 644 9177

andrew@chromasun.com