Research, Infrastructure and Facilities @ CEME Intra-NUST Research Conference (INRC 2014)

8 Nov 2014

1

C o l l e g e o f E & M E

Sequence (30 mins)

2

Overview of Infrastructure and Facilities

By Dr Farooque Azam (HoD Research)

Robotics and Prosthesis Research Group

By Umer Izhar (PI)

Control Systems Research Group

By Dr Fahad Mumtaz Malik (PI)

Microwave Engineering Research Laboratory

By Dr Mojeeb Bin Ihsan (PI)

6 minutes

8 minutes

8 minutes

8 minutes

30 minutes

C o l l e g e o f E & M E

FACTS & FIGURES

• Established in: 1957

• First Post Graduate Entry: 1993

• First Undergraduate Entry: 1983

• Current Students Enrolled:

– PG - 1159 (MS=769, PhD=90)

– UG - 1402 (EE=339, ME=363, CE=353, MTS=344)

• MS graduates:

• PhD graduates:

2561

887

22

3

C o l l e g e o f E & M E

Foreign 33

(67.3%)

Local 16

(32.7%)

PhD

FACTS & FIGURES

• Total Faculty:

• PhD: – 33 Foreign – 16 Local

• MS / M Phil: – 13 Foreign – 30 Local

92

Undergraduate Programs (4)

Mechanical Engineering Electrical Engineering Computer Engineering Mechatronics Engineering Post-graduate Programs (6) Mechanical Engineering Electrical Engineering Computer Engineering Mechatronics Engineering Computer Software Engineering Engineering Management

49

43

4

Foreign 13

(30.3%)

Local 30

(69.7%)

MS / M Phil

C o l l e g e o f E & M E

Department Year Journals Conference ISI Impact journals

Total

Computer Engineering

2013 42 40 28 110

2014 50 62 39 151

Basic Sciences & Humanities

2013 0 01 54 55

2014 0 01 57 58

Electrical Engineering

2013 2 16 01 19

2014 2 11 02 15

Mechanical Engineering

2013 01 05 04 10

2014 01 06 04 11

Mechatronics Engineering

2013 05 18 02 25

2014 04 15 04 23

Engineering Management

2013 05 18 02 25

2014 04 15 04 23

Total 116 208 201 525

CEME – Publications (Department Wise)

5

C o l l e g e o f E & M E

55 61

98

110

91

110

0

20

40

60

80

100

120

2013 2014

Journals

Conferences

ISI Impact Journals

CEME - Publications

6

C o l l e g e o f E & M E

S/No Project Title Principal Investigator

1 Pilot Level Production of Ground Surveillance Radar Dr. Mojeeb Bin Ihsan

2 Development of VTOL UAV

Dr. Fahad Mumtaz Malik

3 Design and Fabrication of Remotely Driven Convoy Lead Vehicle Controls

Dr. Javaid Iqbal

4 Designing and Development of Cost Effective Water Surface Turbine/Wheel for Electric Power Generator

Dr. Syed Waheed Ul Haq

Projects in Hand (4 / 9)

7

C o l l e g e o f E & M E

Projects in Hand (5 / 9)

S/No Project Title Principal Investigator

6 Sustainable Energy Solution for Rural Communities Through Community Participation

Col Dr Khalid Mehmood

7 Establishing a lab of Multi-agent Intelligent Electro Mechanical Systems (MIEMS) and Participation in Robocop Small Size League

Dr Shoab A Khan

8 Indigenous development of multi-Biometric authentication system under PSF Financial assistance program-College of EME.

Brig Dr. M Younis Javed

9 HP2C-based integration and Automation in Energy Efficient Building

Dr. Imran Akhtar

10 Design and Fabrication of Solar Powered Unmanned Air Vehicle (SPUAV)

Asst Prof M. Saif Ullah Khalid

8

C o l l e g e o f E & M E

Labs Infrastucture

• DMTS – Robotics and Control Lab

– Industrial Automation Lab

– Machine vision & Embedded Sys Lab

– Electric Circuits Lab

– CAD/CAM Lab

• DCE – DSP & DSD Lab

– Embedded Systems Lab

– Computing Lab

– Image processing Lab

– Computer Networks Lab

– Project lab

– Electronics Lab

• DME − Strength of Materials Lab − Dynamics & Control Lab − Fluid Mechanics Lab − Heat Transfer Lab − Steam Lab − Computer Aided Engineering Lab − Automotive Lab − Engineering Workshops − Composite Materials Research Lab − Mechanarium Research Lab

• DEE − Microwave Lab − Basic Electronics Lab − Electrical Machines Lab − Digital Signal Processing Lab − Communication Lab − Control System Lab − Electronics System Lab

9

Common Engineering Workshop Facilities

For All Departments

10

Engineering Workshops

11

Machine Shop

Welding Shop

Fitter Shop

C o l l e g e o f E & M E

DEPARTMENT OF MECHATRONICS ENGINEERING

(DMTs)

12

(1/5)

C o l l e g e o f E & M E

• Robotics & Control Lab – ABBIRB 2400 robotic arm with controller

– ‘LK-5 Industrial Robotic Arm and Welding Unit

– ActiveMedia PeopleBot Mobile Robot

– JANOME JR 2200 Screw Tightning Robot

– XR-4 Robotic Arm with Mark-IV Controller

– OCT-1C 8-Legged Walking Robot

– Khepera-II Mobile Robot

– Rug Warrior Robots

– Intelitek Vision System

– Intelitek Conveyor System with Allen Bradley PLCs

– Quanser SRV-02-ET, Inverted Pendulem Seesaw

– Quanser SRV-02-ET Self Erecting Pendulem

Infrastructure/Facilities @ CEME – DMTS

13

C o l l e g e o f E & M E

• Industrial Automation Lab – Denford CIM System

– CNC Slant Bed Lathe

– Denford CNC 3-Axis Milling Center

– Denford Servo Robots and Conveyer system

– PCs with CAD/CAM Softwares

– PLC trainer with LCD display

– PLC trainer with hand-held programmer

– ST/6 CNC Lathe

– RM/6 CNC Mini Milling Machine (Wood Router)

– Mini CNC System (Attachments)

– Desktop PCs

Infrastructure/Facilities @ CEME – DMTS

14

C o l l e g e o f E & M E

• Machine Vision & Embedded System Lab – Multimedia Projector

– Oscilloscopes, 40 MHz (INSTEK, Taiwan)

– Power Supplies DC, 3-Channel 195W (INSTEK, Taiwan)

– Function Generators 5 MHz, (ESCORT, Taiwan)

– Digital Multimeters, (handheld, ESCORT, Taiwan)

– Digital Logic Trainers

– Cameras

– Micro Controller Trainers

– PIC Development Board (easyPIC 5)

– Desktop PCs

Infrastructure/Facilities @ CEME – DMTS

15

C o l l e g e o f E & M E

Research Groups @ CEME – DMTS

S/No Research Groups

1 Robotics and Prosthesis Research Group

2 Bio Medical Research Group

3 Automotives Research Group

4 Intelligent Systems Research Group

5 MicroElectroMechanical Systems (MEMS) Research Group

16

DEPARTMENT OF MECHANICAL ENGINEERING

(DME)

17

(2/5)

• Academics Lab − Strength of Materials Lab

− Dynamics & Control Lab

− Fluid Mechanics Lab

− Heat Transfer Lab

− Steam Lab

− Computer Aided Engineering Lab

− Automotive Lab

− Engineering Workshops

− Composite Materials Research Lab

− Mechanarium Research Lab

Infrastructure/Facilities @ CEME – DME

18

C o l l e g e o f E & M E

Research Groups @ CEME – DME

S/No Research Groups

1 Manufacturing Research Group

2 Composite Research Group

3 Automotive Engineering Research Group

4 Mechanarium Research Group

5 Renewable Energy Research Group

19

Composites Engineering Research Group

20

• Various aspects of applied and theoretical research in the field of composite materials, including failure and damage modeling, Structural health monitoring, testing standards for 3D composites, product design and development, manufacturing processes, micromechanics, wind turbine blades design and software development. • Research Grants: • Sep 2010 – 2013: DFID/British Council UK - DelPHE grant of Rs.

8.5 Million: titled “Capacity building for enhancing R&D in manufacturing, testing and certification of composite materials” (PI : Dr Rizwan S Choudhry)

• 2014 – 2016: In Process (renegotiating approved amount) : HEC, Pakistan: Rs. 9.993 Million: titled "Developing testing standards for advanced 3D fibre reinforced polymeric composite materials“(PI : Dr Rizwan S Choudhry)

• Graduate Students • In progress (2 PhD, 7 MSc, 15UG) • Graduated (6 MSc, 14 UG)

• Publications (2010-present) • Journal articles: 1 • Conference Publications: 8

• Organized National Conferences : 1 • Organized Training Workshops and Seminars : 5

Design of a 36 m long composite wind turbine blade

Design and manufacture of Olympic standard canoe Vacuum assisted resin

infusion

Modelling transverse impact damage growth in composites

MECHANARIUM Research Group

21

• Studies fluid-structure interaction (FSI) using supercomputing, theoretical analysis, modeling and simulation of engineering and industrial applications ranging from aerospace to energy efficiency to biomedical applications

• Organized International Conference on Advanced Modeling & Simulation, Nov 2011

• Research Grants: • HP2C-based integration and automation in energy efficient buildings funded by TWAS-COMSTECH, Italy , US $8500 (PI: Dr Imran Akhtar) • Development of Solar Powered Unmanned Aerial Vehicle funded by DGMP, Ministry of Defense Rs 350,000 (PI: Asst Prof M. Saif Ullah Khalid)

• Graduate Students • In progress (2 PhD, 4 MSc) • Graduated (12 MSc)

• Publications (2013-present) • Journal articles: 7 • Peer-reviewed conference proceedings: 9

Insertion torques in dental implants

FSI of a vertical-axis wind turbine

FSI over turbine blades for fatigue

Simulation of a vacuum pump

CFD of Data Center for energy conservations

Automotive Research Group

22

• Aim of Automotive research group is development of sustainable indigenous mobility and mobility related solutions. The current focus is on analysis and improvement of dynamic stability of vehicles • Organized first national university level “Design Build Energize Competition” for fuel efficient vehicle prototypes and technologies.

• Research Grants: • Development of Light weight 3-wheeled Vehicle funded by HEC Rs. 6.02 Million (PI: Asst Prof Raja Amir) • Development of fuel efficient vehicle for Shell Eco Marathon. Achieved first position in Pakistan level and best mileage from South Asia (2012) in Urban concept Category

• Graduate Students • In progress (1 PhD, 2 MSc, 3UG) • Graduated (2 MSc, 15 UG)

Team NUSTAG at SEM 2013 Wheeled All Terrain Mobility Platform

Indigenously Developed Rickshaw and Electric Hybrid Vehicle

Renewable Energy Research Group

23

• Primary aim of the research group is to train students and deliver research outputs in the field of Solar Thermal Engineering with special focus on various Solar based heating and cooling applications. Group also emphasizes on different storage materials used for solar energy

• Conducted many workshops/seminars on awareness in the country about solar regimes in Pakistan & also on potential of solar industrial water heating • Research Grants

• Solar industrial Hybrid water heating System installed at SLW Lahore – Rs. 6 Million (PI: Asst Prof Ahmed Sohail)

• Industrial application Solar Hybrid MAPs dryer for MEDA/USAID – 3.5 Million (PI: Asst Prof Ahmed Sohail)

• Development of Solar Parabolic collector with AEDB at solar Lab EME College (PI: Asst Prof Ahmed Sohail)

• Graduate Students

• Graduated (2 MSc) • Undergraduate (12 BE)

Manufacturing Research Group

24

With the rapidly evolving global manufacturing industry, MRG is aimed at developing solutions that are abreast with current and future technologies of reconfigurable manufacturing systems with Pakistan’s expanding manufacturing sector in perspective. • Research Areas

Precision Manufacturing Reconfigurable Manufacturing Process plan Optimization Assembly Line Design Algorithmic Design Fixture Design

• Achievements

More than 10 Research publications in renowned international journals. Assembly line balancing and optimization for mixed model line at Pakistan’s largest manufacturing setup completed in 2011. Development of 04 DOF Parallel Manipulator (Awarded Best UG Project 2012)

DEPARTMENT OF ELECTRICAL ENGINEERING

(DEE)

25

(3/5)

• Academics Lab

− Microwave Lab

− Basic Electronics Lab

− Electrical Machines Lab

− Digital Signal Processing Lab

− Communication Lab

− Control System Lab

− Electronics System Lab

Infrastructure/Facilities @ CEME – DEE

26

C o l l e g e o f E & M E

Research Groups @ CEME – DEE

S/No Research Groups

1 Semiconductors Research Group

2 Bio Medical Research Group

3 DSP & communication Systems Research Group

4 Control Systems Research Group

5 MicroElectroMechanical Systems (MEMS) Research Group

27

C o l l e g e o f E & M E

DEPARTMENT OF COMPUTER ENGINEERING

(DCE)

28

(4/5)

C o l l e g e o f E & M E

• Academics Lab – DSP & DSD Lab

– Embedded Systems Lab

– Computing Lab

– Image processing Lab

– Computer Networks Lab

– Project lab

– Electronics Lab

Infrastructure/Facilities @ CEME – DCE

29

C o l l e g e o f E & M E

Research Groups @ CEME – DCE

S/No Research Groups

1 Communication, Networks & Parallel Processing Research Group

2 Signal & Image Processing Research Group

3 Web Development, Database & Data mining Research Group

4 SCADA & Control Systems Research Group

30

C o l l e g e o f E & M E

DEPARTMENT OF ENGINEERING MANAGEMENT

(DEM)

31

(5/5)

C o l l e g e o f E & M E

Research Groups @ CEME – DEM

S/No Research Groups

1 General Engineering Management Research Group

2 Quality management Research Group

3 Production Management Research Group

4 Environment & Energy management Research Group

32

THANK YOU

33

C o l l e g e o f E & M E

DEPARTMENT OF ENGINEERING MANAGEMENT

(DEM) By Umer Izhar (PI)

34

Robotics & Prosthesis Research Group

Next….

8 mins….