Post on 16-Sep-2018
Information procedure Page 1
Monthly Notifications Register
Notifications registered at CCMC from 2018-02-01 to 2018-02-28
Register issued on : 2018-03-07
A list of subsectors can be found at the end of this document.
Information procedure Page 2
Monthly Notifications Register
Notifications registered at CCMC from 2018-02-01 to 2018-02-28
Sector A : SERVICES
Register issued on : 2018-03-07
Page 3Subsector A01: TOURIST SERVICES
Subsector : A01 Registration Date : 2018-02-19Organization : IPQ Draft Issue Date : 2018-02-15Country : Portugal Latest Date for Comments : 2018-03-16
Project ID : C1441801/0001 Draft for public enquiry
ICS : 03.080, 03.200National Ref : prNP 4523Title : Accessible Tourism. Hotels, apartment hotels and innsScope : The present Standard is intended to promote good service in hotels, aims to set a
benchmark of quality in service and inclusive accessibility. The requirements of this standard are applicable to all accommodation establishments regardless of their type and size. Focus on the following services provided by the establishment: lodging, food and related procedures for the reception and care, as well as the pools and meeting rooms. The present Standard is intended to promote good service in hotels, aims to set a benchmark of quality inserviceandinclusiveaccessibility.The requirements of this standard are applicable to all accommodation establishments regardlessoftheirtypeandsize.Focus on the following services provided by the establishment: lodging, food and related proceduresforthereceptionandcare,aswellasthepoolsandmeetingrooms.
Relatedness :National : New
** End of Subsector **
Subsector A11: SAFETY AND SECURITY
Subsector : A11 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : t0122173/0001 Project Established
ICS : 03.080.10National Ref :Title : Work places – Rules for turkish and foreign language teaching centersScope : This standard includes rules for structural characteristics, operating, personal and technical
equipment of turkish and foreign language teaching centers
Relatedness :National : New
Subsector : A11 Registration Date : 2018-02-02Organization : TSECountry : Turkey
Project ID : t3012047/0001 Project Established
ICS : 03.080.30National Ref :Title : Competent services - Rules for motor vehicles Scope : This standard includes, rules for management, working conditions, personnel, technical
equipment, gruping and structural properties of competent services around the rules mentioned in the contract with the main firm of motor vehicles (land) periodic control, diagnosis, motor, shift box, transfer organs, suspention system, electric and electronic
Page 4
sistems, asistant systems (accessory), additional systems (changes), trunk (body, paint) services before and after sale
Relatedness :National : New
** End of Subsector **
Subsector A99: UNDETERMINED
Subsector : A99 Registration Date : 2018-02-28Organization : UNICountry : Italy
Project ID : 01604213/0001 Project Established
ICS : 03.040National Ref : UNI1604213Title : Non-regulated professions - Social project manager - Knowledge, skill and competence
requirementsScope : This standard specifies the requirements concerning the professional activity of the Social
project manager, or rather of the professional who is involved in the conception, planning, drafting, management, control and monitoring, evaluation and reporting of social and welfareprojects.These requirements are specified, starting from specific identified tasks and acitivities, in terms of knowledge, skills and competence, in accordance with the European Qualifications Framework, EQF and they are stated in order to facilitate learning output evaluation and validationprocesses.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 5
Monthly Notifications Register
Notifications registered at CCMC from 2018-02-01 to 2018-02-28
Sector B : BUILDING AND CONSTRUCTION
Register issued on : 2018-03-07
Page 6Subsector B01: FIRE PROTECTION
Subsector : B01 Registration Date : 2018-02-23Organization : BSI Draft Issue Date : 2018-02-12Country : United Kingdom Latest Date for Comments : 2018-05-06
Project ID : 01603832/0001 Draft for public enquiry
ICS :National Ref : BS 7974Title : BS7974.Applicationoffiresafetyengineeringprinciplestothedesignof
buildings.Codeofpractice.Part0:Guidetodesignframeworkandfiresafetyengineering procedures
Relatedness :National : New
Subsector : B01 Registration Date : 2018-02-23Organization : BSICountry : United Kingdom
Project ID : 01800228/0001 Project Established
ICS :National Ref : BS 7273-6Title : Codeofpracticefortheoperationoffireprotectionmeasures.Part6:
Interfacebetweenfiredetectionandalarmsystemswithancillarysystemsandequipment
Relatedness :National : New
Subsector : B01 Registration Date : 2018-02-23Organization : BSICountry : United Kingdom
Project ID : 01800516/0001 Project Established
ICS :National Ref : BS 5839-1:2017Title : Firedetectionandfirealarmsystemsforbuildings.Codeofpracticefor
design, installation, commissioning and maintenanceof systems in non-domestic premises.Corrigendum
Relatedness :National : New
Subsector : B01 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 03101171/0001 Project Established
ICS :National Ref : 03101171Title : Statements for fire statistics
Relatedness :
Page 7
National : New
Subsector : B01 (Secondary Subsector)
Registration Date : 2018-02-09
Organization : NBNCountry : Belgium
Project ID : BE664055/0001 Project Established
ICS : 13.220.01National Ref : prNBN S 21-204-2:2018Title : Fire protection in buildings - School buildings - Part 2: Fire protection in new school
buildings
Relatedness :National : REV/AMD NBN S 21-204:1982
** End of Subsector **
Subsector B02: STRUCTURES
Subsector : B02 Registration Date : 2018-02-26Organization : AFNORCountry : France
Project ID : 00207167/0001 Project Established
ICS :National Ref : PR NF DTU 13.11 P2Title : work - Superficial foundations - Part 2 : Contract bill of special administrative model
clauses Building
Relatedness :National : New
Subsector : B02 Registration Date : 2018-02-26Organization : AFNORCountry : France
Project ID : 00207168/0001 Project Established
ICS :National Ref : PR NF DTU 13.11 P1-2Title : works - Superficial foundations - Part 1-2 : General criteria for selection of
materialsBuilding
Relatedness :National : New
Subsector : B02 Registration Date : 2018-02-26Organization : AFNORCountry : France
Project ID : 00207169/0001 Project Established
ICS :National Ref : PR NF DTU 13.11 P1-1
Page 8
Title : Building works - Superficial foundations - Part 1-1 : Contract bill of technical model clausesBuilding
Relatedness :National : New
Subsector : B02 Registration Date : 2018-02-23Organization : BSICountry : United Kingdom
Project ID : 01800164/0001 Project Established
ICS :National Ref : BS 851188-1Title : Flood Protection products - Specification. Part 1
Relatedness :National : New
Subsector : B02 Registration Date : 2018-02-23Organization : BSICountry : United Kingdom
Project ID : 01800165/0001 Project Established
ICS :National Ref : BS 851188-2Title : Flood Protection products - Specification. Part 2
Relatedness :National : New
** End of Subsector **
Subsector B03: CONCRETE
Subsector : B03 Registration Date : 2018-02-26Organization : AFNORCountry : France
Project ID : 00207070/0001 Project Established
ICS :National Ref : PR NF P98-052Title : Prefabricated concrete products - Prefabricated concrete window sills
Relatedness :National : New
Subsector : B03 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : tst01247/0002 Project Established
ICS : 91.100.30National Ref :
Page 9
Title : Concrete mixing,casting and maintenance rules (under normal weather conditions)Scope : This standard comprises casting and curing rules to achive concrete having designated
workability, strength and durability under normal weather conditions.
Relatedness :National : NewEuropean : Modified DIN 1045-2:2008
Subsector : B03 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : tst01247/0002 Project Established
ICS : 91.100.30National Ref :Title : Concrete mixing,casting and maintenance rules (under normal weather conditions)Scope : This standard comprises casting and curing rules to achive concrete having designated
workability, strength and durability under normal weather conditions.
Relatedness :National : NewEuropean : Modified DIN 1045-3:2012
** End of Subsector **
Subsector B04: CEMENT
Subsector : B04 Registration Date : 2018-02-19Organization : UNECountry : Spain Latest Date for Comments : 2018-03-31
Project ID : P0048340/0001 Draft for public enquiry
ICS :National Ref : PNE 80402Title : Cement. Delivery conditions.Scope : This Project standard revises the current published standard, which specifies the
requirements and delivery conditions of all types of cements specified in the corresponding product standards. .
Relatedness :National : REV/AMD UNE 80402:2008, UNE 80402:2008/1M:2011
** End of Subsector **
Subsector B05: FIRE TESTS
Subsector : B05 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 00517834/0001 Project Established
ICS : 13.220.50National Ref : DIN 4102-7Title : Fire behaviour of building materials and building components - Part 7: Roofing;
definitions, requirements and testing
Relatedness :
Page 10
National : New
Subsector : B05 Registration Date : 2018-02-09Organization : NBNCountry : Belgium
Project ID : BE664055/0001 Project Established
ICS : 13.220.01National Ref : prNBN S 21-204-2:2018Title : Fire protection in buildings - School buildings - Part 2: Fire protection in new school
buildings
Relatedness :National : REV/AMD NBN S 21-204:1982
** End of Subsector **
Subsector B09: THERMAL MATTERS
Subsector : B09 Registration Date : 2018-02-22Organization : PKNCountry : Poland
Project ID : 21101166/0001 Project Established
ICS : 91.120.10National Ref : prPN-B-20106Title : Thermal insulation of building and industrial plant facilities -- Quantity surveyingScope : This document specifies the metodology for quantity surveying of thermal insulation of
building and industrial plant facilities.
Relatedness :National : New
** End of Subsector **
Subsector B18: SCAFFOLDING
Subsector : B18 Registration Date : 2018-02-14Organization : MSZT Draft Issue Date : 2018-01-22Country : Hungary Latest Date for Comments : 2018-04-22
Project ID : 00012312/0001 Published Standard
ICS : 91.220, 91.220National Ref : MSZ 13020Title : Erection, use and dismantling of requirements for metal scaffolds made of prefabricated
componentsScope : This standard gives regulations to façade scaffold systems for erection, maintenance, cheking
and examination, exluded the manufacturing and designing.
Relatedness :
National :REV/AMD MSZE 13017:2016; MSZ 13017-1:1983; MSZ 13017-2:1983; MSZ 13017-3:1983; MSZ 13017-4:1983
Subsector : B18 (Secondary Registration Date : 2018-02-14
Page 11
Subsector)Organization : MSZT Draft Issue Date : 2018-01-22Country : Hungary Latest Date for Comments : 2018-04-22
Project ID : 00012312/0001 Published Standard
ICS : 91.220, 91.220National Ref : MSZ 13020Title : Erection, use and dismantling of requirements for metal scaffolds made of prefabricated
componentsScope : This standard gives regulations to façade scaffold systems for erection, maintenance, cheking
and examination, exluded the manufacturing and designing.
Relatedness :
National :REV/AMD MSZE 13017:2016; MSZ 13017-1:1983; MSZ 13017-2:1983; MSZ 13017-3:1983; MSZ 13017-4:1983
** End of Subsector **
Subsector B22: WALLCOVERINGS
Subsector : B22 Registration Date : 2018-02-26Organization : AFNORCountry : France
Project ID : 00207254/0001 Project Established
ICS :National Ref : NF P 05-011Title : Floors coverings - Classification of locations according to their slip resistance
Relatedness :National : New
** End of Subsector **
Subsector B25: GAS DISTRIBUTION INSTALLATION AND RELATED EQUIPMENT
Subsector : B25 Registration Date : 2018-02-28Organization : UNICountry : Italy
Project ID : 01603832/0001 Project Established
ICS : 75.060, 75.200, 91.120.25National Ref : UNI1603832Title : Automatic shutdown seismic- induced devicesScope : The standard establishes functional requirements, acceptance and testing tests, for seismic-
inducedautomaticshutdowndevices-DASS.The devices in question are used in infrastructure for the transmission and distribution of combustiblegasesoftheI,IIandIIIfamily,asdefinedbyUNIEN437.
Relatedness :National : New
Subsector : B25 Registration Date : 2018-02-19Organization : UNECountry : Spain Latest Date for Comments : 2018-03-31
Page 12
Project ID : P0047618/0001 Draft for public enquiry
ICS :National Ref : PNE 60210Title : Liquefied natural gas (LNG) satellite terminals.Scope : This standard establishes the technical requirements and minimum safety measures that
must be implemented during design, construction, tests, installation, utilisation and maintenance of liquefied natural gas (LNG) satellite terminals with a storage geometric capacity up to 1500 m3 and a maximum service pressure of 1 bar.
Relatedness :National : REV/AMD UNE 60210:2015
** End of Subsector **
Subsector B26: ROAD BUILDING AND MAINTENANCE
Subsector : B26 Registration Date : 2018-02-19Organization : UNECountry : Spain Latest Date for Comments : 2018-03-31
Project ID : P0049630/0001 Draft for public enquiry
ICS :National Ref : PNE 135334Title : Vertical signing. Retroreflective sheetings with glass beads. Characteristics and test
methods.Scope : This standard establishes the characteristics of the retroreflective sheetings with glass beads
usedinfixedverticalcontroltrafficsignsanditstestmethods.The retroreflective characteristic of these sheetings is caused by a glass microspheres layer into its composition.
Relatedness :National : REV/AMD UNE 135334:2011
** End of Subsector **
Subsector B27: WATERPROOFING MATERIALS
Subsector : B27 Registration Date : 2018-02-23Organization : BSICountry : United Kingdom
Project ID : 01800091/0001 Project Established
ICS :National Ref : BS 6229Title : Flatroofswithcontinuouslysupportedflexiblewaterproofcoverings.Codeof
practice
Relatedness :National : New
** End of Subsector **
Subsector B33: BUILDING DESIGN
Page 13
Subsector : B33 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 00517638/0001 Project Established
ICS : 01.100.30National Ref : DIN 1356-1Title : Building and civil engineering drawings - Part 1: General rules for representation
Relatedness :National : New
** End of Subsector **
Subsector B99: UNDETERMINED
Subsector : B99 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 00518233/0001 Project Established
ICS :National Ref : 00518233Title : Vegetation technology in landscaping - Turf and seeding
Relatedness :National : New
Subsector : B99 Registration Date : 2018-02-08Organization : NENCountry : Netherlands
Project ID : 50002058/0001 Project Established
ICS : 23.040.01, 93.030National Ref : NPR 3218-2:2018 Concept nlTitle : Sewerage systems outside buildings - Part 2: Guidance on the use phase Scope : NPR 3218-2 is applicable on the use of sewerage, on the whhole of appliances for the
transport and the discharge of wastewater. It is not applicable to communal purifying.
Relatedness :National : New
Subsector : B99 Registration Date : 2018-02-08Organization : NENCountry : Netherlands
Project ID : 50002059/0001 Project Established
ICS : 23.040.01, 93.030National Ref : NPR 3218-3:2018 Concept nlTitle : Sewerage systems outside buildings - Part 3: Guidance and maintenance Scope : NPR 3218-2 is applicable on the use of sewerage, on the whhole of appliances for the
transport and the discharge of wastewater. It is not applicable to communal purifying.
Relatedness :
Information procedure Page 15
Monthly Notifications Register
Notifications registered at CCMC from 2018-02-01 to 2018-02-28
Sector C : CHEMICALS, CHEMICAL ENGINEERING AND FOOD PRODUCTS
Register issued on : 2018-03-07
Page 16Subsector C01: Food products
Subsector : C01 Registration Date : 2018-02-28Organization : UNICountry : Italy
Project ID : 01604069/0001 Project Established
ICS : 03.080.30, 67.020National Ref : UNI1604069Title : Food services - Minimum requirements for the drafting of specifications, tendering
notifications and regulationsScope : This standard specifies the minimum technical requirements that shall be contained in the
tenderingnotificationsandregulationsfortherelianceonfoodservices.This standard does not apply to activities related to food services, concerning design and execution of structural and plant works.
Relatedness :National : REV/AMD UNI 11407:2011
Subsector : C01 Registration Date : 2018-02-28Organization : UNICountry : Italy
Project ID : 01604210/0001 Project Established
ICS : 67.200.10National Ref : UNI1604210Title : Animal and vegetable fats and oils - Refined palm kernel oil obtained from the kernel of
the fruits of Elaeis guineensis - Characteristics and analytical methodsScope : This standard specifies the characteristics and analytical methods of the refined palm kernel
oil obtained from the kernel of the fruits of Elaeis guineensis
Relatedness :National : REV/AMD UNI 22041:2001
Subsector : C01 Registration Date : 2018-02-28Organization : UNICountry : Italy
Project ID : 01604211/0001 Project Established
ICS : 67.200.10National Ref : UNI1604211Title : Animal and vegetable oils and fats and derived products - Refined Palm oil obtained from
the fruits of Elaeis guineensis - Characteristics and analytical methodsScope : This standard specifies the characteristics and analytical methods of the refined Palm oil
obtained from the fruits of Elaeis guineensis for use in food.
Relatedness :National : REV/AMD UNI 22012:2001
Subsector : C01 Registration Date : 2018-02-28Organization : UNICountry : Italy
Project ID : 01604212/0001 Project Established
Page 17
ICS : 67.200.10National Ref : UNI1604212Title : Animal and vegetable oils and fats and derived products – Rapeseed refined oil obtained
from seeds of Brassica (Brassica napus L., Brassica campestris L., Brassica rapa L., Brassica juncea L. Brassica tournefortii Gouan) with low erucic content (canola oil) - Characteristics and analytical methods
Scope : This standard establishes the characteristics and methods of analysis of refined rapeseed oil for food use.
Relatedness :National : REV/AMD UNI 22063:1998
Subsector : C01 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : tst00667/0001 Project Established
ICS : 67.120.10National Ref :Title : Butchery Lamb-Carcasses Scope : This standard specifies the slaughtered lamb carcasses marketed as fresh, chilled and frozen
forms. It does not specifies the slaughtered mutton carcasses and other carcasses of slaughtered animals.
Relatedness :National : New
Subsector : C01 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : tst02974/0001 Project Established
ICS : 67.060National Ref :Title : WheatScope : This standard covers wheat. Covered wheat by document for seed
Relatedness :National : New
Subsector : C01 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : tst03200/0001 Project Established
ICS : 67.060National Ref :Title : Oats Scope : This standard specifies the requirements oats species described in 3.1. It does not cover to
oats species certified as seed.
Relatedness :National : New
Page 18
Subsector : C01 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : tst03267/0001 Project Established
ICS : 67.060National Ref :Title : Rye Scope : This standard comprise rye. It doesn't comprise the rye mentioned seed in the document.
Relatedness :National : New
Subsector : C01 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : tst03415/0001 Project Established
ICS : 67.060National Ref :Title : Corn Scope : This standard comprise corn. It doesn't comprise the corn mentioned seed in the document.
Relatedness :National : New
Subsector : C01 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : tst04078/0001 Project Established
ICS : 67.060National Ref :Title : BarleyScope : This standard covers arpay. It does not cover the harp indicated by the document that the
seedis.
Relatedness :National : New
Subsector : C01 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : tst13138/0001 Project Established
ICS : 67.060National Ref :Title : Triticale Scope : This standard comprise triticale. It doesn't comprise the triticale mentioned seed in the
document.
Page 19
Relatedness :National : New
** End of Subsector **
Subsector C03: CHEMISTRY
Subsector : C03 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : t1002436/0001 Project Established
ICS : 87.060.30National Ref :Title : Mineral solvents (white spirit)Scope : This standard specifies mineral solvents
Relatedness :National : New
** End of Subsector **
Subsector C09: SURFACTANTS
Subsector : C09 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : t1013773/0001 Project Established
ICS : 71.100.40National Ref :Title : Dish washing detergent for industrial use Scope : This standard specifies dish washing detergent for industrial use
Relatedness :National : New
Subsector : C09 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : tst05155/0002 Project Established
ICS : 71.100.40National Ref :Title : Laundry detergent - Used in industrial type washing machinesScope : This standard specifies laundry detergent used in industrial type washing machines
Relatedness :National : New
** End of Subsector **
Subsector C13: FERTILIZERS
Page 20
Subsector : C13 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 05702074/0001 Project Established
ICS :National Ref : 05702074Title : Peats and peat products for horticulture and landscape gardening - Test methods,
properties, specifications
Relatedness :National : New
** End of Subsector **
Subsector C20: EXPLOSIVES AND FIREWORKS
Subsector : C20 Registration Date : 2018-02-08Organization : NENCountry : Netherlands
Project ID : 50002060/0001 Project Established
ICS : 13.230, 29.260.20National Ref : NPR 7910-1:2018 nlTitle : Classification of hazardous areas with respect to explosion hazard - Part 1: Gas
explosion hazard, based on NEN-EN-IEC 60079-10-1:2015 Scope : This code of practice is a national guideline for the execution of the principles of
classification of hazardous areas with respect to explosion hazard, given in NEN-EN-IEC 60079-10-1:2009.
Relatedness :National : New
Subsector : C20 Registration Date : 2018-02-08Organization : NENCountry : Netherlands
Project ID : 50002061/0001 Project Established
ICS : 13.230, 29.260.20National Ref : NPR 7910-2:2018 Concept nlTitle : Classification of hazardous areas with respect to explosion hazard - Part 2: Dust
explosion hazard, based on NEN-EN-IEC 60079-10-2:2015 Scope : This code of practice gives guidelines to determine the areas where hazardous areas with
respect to explosion hazard can occur and the probability of occuring.
Relatedness :National : New
Subsector : C20 Registration Date : 2018-02-02Organization : TSECountry : Turkey
Project ID : t0112738/0001 Project Established
ICS : 95.020
Page 21
National Ref :Title : Monitoring of mine action organisationsScope : This standard provides guidance on the procedural requirements for the handover of
cleared land, and details responsibilities and obligations.
Relatedness :National : New
Subsector : C20 Registration Date : 2018-02-02Organization : TSECountry : Turkey
Project ID : t0116147/0001 Project Established
ICS : 29.060.20, 95.020National Ref :Title : Cables of rated voltages up to and including 0,6/1 kV with special fire performance and
XLPE insulated, sheathed and armoured power cablesScope : This standard applies to cables of rated voltages up to including 0,6/1 kV with special fire
performance and XLPE insulated, sheathed and armoured power cables
Relatedness :National : New
** End of Subsector **
Subsector C21: COSMETICS
Subsector : C21 Registration Date : 2018-02-19Organization : UNECountry : Spain Latest Date for Comments : 2018-03-31
Project ID : P0049497/0001 Draft for public enquiry
ICS :National Ref : PNE 84026Title : Cosmetic raw materials. Preparation of infrared spectra for solid raw materialsScope : This standard aims to set the necessary operating conditions to record infrared spectra (IR)
of solid raw materials for use in cosmetics
Relatedness :National : REV/AMD UNE 84026:2002
** End of Subsector **
** End of Sector **
Information procedure Page 22
Monthly Notifications Register
Notifications registered at CCMC from 2018-02-01 to 2018-02-28
Sector F : FUNDAMENTAL STANDARDS
Register issued on : 2018-03-07
Page 23Subsector F14: GRAPHICAL TECHNOLOGY, SIGN-BOARDS AND NAMEPLATES
Subsector : F14 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 01700034/0001 Project Established
ICS : 01.040.37National Ref : DIN 16514Title : Printing technology - Terminology for letterpress printing
Relatedness :National : New
Subsector : F14 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 01700035/0001 Project Established
ICS : 01.040.37National Ref : DIN 16500-2Title : Printing technology - General (non process-specific) terminology
Relatedness :National : New
Subsector : F14 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 01700036/0001 Project Established
ICS : 01.040.37National Ref : DIN 16529Title : Printing technology - Terminology for planorgraphic printing
Relatedness :National : New
** End of Subsector **
Subsector F15: MATERIAL TESTING IN GENERAL
Subsector : F15 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 06235216/0001 Project Established
ICS : 17.040.20National Ref : DIN 50990Title : Measurement of coating thickness - Measurement of the area-related mass of metallic
layers by means of spectrometric measurement methods
Relatedness :National : New
Page 24** End of Subsector **
Subsector F16: GRAPHICAL SYMBOLS
Subsector : F16 Registration Date : 2018-02-22Organization : ASICountry : Austria
Project ID : 00027354/0001 Project Established
ICS : 13.100, 23.040.01National Ref : ÖNORM Z 1001Title : Marking of pipe lines according to their contentScope : The present ÖNORM is used for the marking of visible or easily accessible (eg in false
ceilings)pipelinesaccordingtotheircontent.Thismarkingisessentialintheinterestofsafety,propermaintenanceandfirefighting.Itshouldalsopointoutthedangerstoavoidaccidents,injuriesorpropertydamages.This ÖNORM does not affect any legislations which provide different requirements for the marking,e.g.ofsubstances,dangers,equipment.The marking of medical gases must comply with ÖNORM EN ISO 7396-1 or ÖNORM EN ISO 5359.
Relatedness :National : New
** End of Subsector **
Subsector F19: OPTICS
Subsector : F19 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 00518221/0001 Project Established
ICS :National Ref : 00518221Title : Survey benchmark
Relatedness :National : New
Subsector : F19 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 02703128/0001 Project Established
ICS :National Ref : 02703128Title : Production in optical engineering - Diamond impregnated cup wheels - Part 2: With
mounting cylinder
Relatedness :National : New
Subsector : F19 Registration Date : 2018-02-16Organization : DIN
Page 25
Country : Germany
Project ID : 02703129/0001 Project Established
ICS :National Ref : 02703129Title : Production in optical engineering - Diamond impregnated cup wheels - Part 8: With
hollow taper shank connection
Relatedness :National : New
** End of Subsector **
Subsector F20: QUALITY ASSURANCE
Subsector : F20 Registration Date : 2018-02-09Organization : EVSCountry : Estonia
Project ID : 00098346/0001 Project Established
ICS :03.060, 03.080, 91.010.01, 91.010.20, 93.010
National Ref : prEVS 911Title : Voluntary professional indemnity guidelines for consulting engineeringScope : Giving recommendations for the conclusion and the substance of voluntary professional
indemnity agreements for consulting with respect to engineering.
Relatedness :National : New
Subsector : F20 Registration Date : 2018-02-19Organization : IPQ Draft Issue Date : 2018-02-15Country : Portugal Latest Date for Comments : 2018-03-16
Project ID : C1521701/0001 Draft for public enquiry
ICS : 03.100.30National Ref : prNP 4427Title : People management systems. RequirementsScope : This Standard specifies requirements for a people management system, covering all
hierarchical levels, areas of activity and organic units of an organization, as a vehicle for improvement its effectiveness and efficiency. The requirements of this Standard apply to organizations intending to: - demonstrate their ability to attract, develop and retain the people needed to fulfil their mission; - implement, maintain and continuously improve an organization-wide people management system; - enhance the satisfaction of its employees through the effective application of the system, including procedures to ensure compliance with applicable statutory and regulatory requirements. All requirements of this Standard are generic and are intended to apply to all organizations regardless of type, size and activity developed. The extent of application will depend on factors such as the organization's people management policy, the complexity of its structure, and its activity.
Relatedness :National : New
Subsector : F20 Registration Date : 2018-02-19
Page 26
Organization : UNECountry : Spain Latest Date for Comments : 2018-03-11
Project ID : P0049534/0001 Draft for public enquiry
ICS :National Ref : PNE 192011-0Title : Procedure for the regulatory inspection. Pressure equipment. Part 0: General
requirementsScope : This standard describes the systematic action for the inspections planned under current
regulation in order to verify the safety of pressure equipment subject to a pressure exceeding 0.5 bar.
Relatedness :National : REV/AMD UNE 192011-1:2012
Subsector : F20 Registration Date : 2018-02-19Organization : UNECountry : Spain Latest Date for Comments : 2018-03-11
Project ID : P0049535/0001 Draft for public enquiry
ICS :National Ref : PNE 192011-4Title : Procedure for the regulatory inspection. Pressure equipment. Part 4: Specific
requirements for cryogenic tanksScope : This standard describes the systematic action for the inspections planned under current
regulation in order to verify the safety of cryogenic tanks.
Relatedness :National : REV/AMD UNE 192011-5:2013
Subsector : F20 Registration Date : 2018-02-19Organization : UNECountry : Spain Latest Date for Comments : 2018-03-11
Project ID : P0049536/0001 Draft for public enquiry
ICS :National Ref : PNE 192011-5Title : Procedure for the regulatory inspection. Pressure equipment. Part 5: Specific
requirements for bottles for self-contained breathing apparatusScope : This standard describes the systematic action for the inspections planned under current
regulation in order to verify the safety of bottles of self-contained breathing apparatus.
Relatedness :National : REV/AMD UNE 192011-6:2016
** End of Subsector **
Subsector F99: UNDETERMINED
Subsector : F99 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 15900091/0001 Project Established
Page 27
ICS :National Ref : 15900091Title : Fundamentals of maintenance
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 28
Monthly Notifications Register
Notifications registered at CCMC from 2018-02-01 to 2018-02-28
Sector I : MECHANICAL ENGINEERING
Register issued on : 2018-03-07
Page 29Subsector I05: IRON PIPES
Subsector : I05 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 08201392/0001 Project Established
ICS :National Ref : 08201392Title : Couplings for compressed air - claw coupling, 42 mm internal width, without securing nut
- Coupling with male, female, hose and closure connection ends, rotary claw couplings, joint ring
Relatedness :National : New
Subsector : I05 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 08201393/0001 Project Established
ICS :National Ref : 08201393Title : Couplings for compressed air - claw coupling, 42 mm internal width, with securing nut -
coupling with male, female and hose connection ends, joint ring
Relatedness :National : New
** End of Subsector **
Subsector I09: SMALL TOOLS
Subsector : I09 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 12102735/0001 Project Established
ICS : 25.060.10National Ref : DIN 9811-2Title : Press tool sets - Part 2: Directives for mounting
Relatedness :National : New
Subsector : I09 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 12102736/0001 Project Established
ICS : 25.060.10National Ref : DIN 9811-1Title : Press tool sets - Part 1: Technical specifications
Relatedness :
Page 30
National : New
** End of Subsector **
Subsector I11: MACHINE TOOLS
Subsector : I11 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 12102794/0001 Project Established
ICS :National Ref : 12102794Title : Parallel shanks made of steel for cutting tools - Part 2: Connecting dimensions for holder
chucks, accessories
Relatedness :National : New
** End of Subsector **
Subsector I17: MACHINERY IN GENERAL (INCLUDING SAFETY)
Subsector : I17 Registration Date : 2018-02-26Organization : AFNORCountry : France
Project ID : 00207029/0001 Project Established
ICS :National Ref : PR NF U66-053Title : Equipments for slaughterhouses - Slaughtering pens - Safety and hygiene requirements
Relatedness :National : New
** End of Subsector **
Subsector I30: AIR DISTRIBUTION
Subsector : I30 Registration Date : 2018-02-28Organization : SNV Draft Issue Date : 2018-02-22Country : Switzerland Latest Date for Comments : 2018-05-31
Project ID : CH180002/0001 Draft for public enquiry
ICS : 91.140.30National Ref : prSIA 382/5Title : Ventilation of residential buildings
Relatedness :National : REV/AMD SIA 2023:2008
** End of Subsector **
Subsector I31: VALVES
Subsector : I31 Registration Date : 2018-02-02
Page 31
Organization : TSECountry : Turkey
Project ID : t1013725/0001 Project Established
ICS : 23.060National Ref :Title : Insulation jackets for valve and assembly armaturesScope : This standard covers insulation jackets for valve and assembly armatures.
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 32
Monthly Notifications Register
Notifications registered at CCMC from 2018-02-01 to 2018-02-28
Sector M : METALLIC MATERIALS
Register issued on : 2018-03-07
Page 33Subsector M01: STEEL
Subsector : M01 Registration Date : 2018-02-16Organization : SFS Draft Issue Date : 2018-02-15Country : Finland Latest Date for Comments : 2018-04-15
Project ID : 0000E501/0001 Draft for public enquiry
ICS :National Ref :Title : Fabricated hot dip galvanized steel reinforcement units for the reinforcement of concrete.
Requirementsforcoatings
Relatedness :National : REV/AMD SFS 1266
Subsector : M01 Registration Date : 2018-02-16Organization : SFS Draft Issue Date : 2018-02-15Country : Finland Latest Date for Comments : 2018-04-15
Project ID : 0000E502/0001 Draft for public enquiry
ICS :National Ref :Title : Reinforcingsteels.WeldablehotrolledribbedsteelbarsA700HW
Relatedness :National : REV/AMD SFS 1216
** End of Subsector **
Subsector M05: WELDING
Subsector : M05 Registration Date : 2018-02-21Organization : UNMSCountry : Slovakia
Project ID : 05800718/0001 Project Established
ICS : 25.160.01, 25.160.10National Ref :Title : Welding. Instructions for basic tests of weldersScope : Title amplification in English
Relatedness :National : REV/AMD STN 05 0705
Subsector : M05 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 09201020/0001 Project Established
ICS : 25.160.50National Ref : DIN 35229Title : Soft solder alloys - Tin and tin alloys - Analysis by spark optical emission spectrometry
(S-OES)
Relatedness :
Page 34
National : New
** End of Subsector **
Subsector M21: PRECIOUS METALS
Subsector : M21 Registration Date : 2018-02-26Organization : AFNORCountry : France
Project ID : 00207172/0001 Project Established
ICS :National Ref : PR NF A56-101Title : Antifriction alloy ingots - Characteristics
Relatedness :National : New
** End of Subsector **
** End of Sector **
Information procedure Page 35
Monthly Notifications Register
Notifications registered at CCMC from 2018-02-01 to 2018-02-28
Sector N : NON-METALLIC MATERIALS
Register issued on : 2018-03-07
Page 36Subsector N03: PETROLEUM PRODUCTS
Subsector : N03 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 06235319/0001 Project Established
ICS :National Ref : 06235319Title : Bitumen and bituminous binders - BTSV Test
Relatedness :National : New
Subsector : N03 Registration Date : 2018-02-02Organization : TSECountry : Turkey
Project ID : t0114866/0001 Project Established
ICS : 87.040National Ref :Title : Coating paste - Elastomeric resin basedScope : This standard covers Coating paste - Elastomeric resin based
Relatedness :National : New
Subsector : N03 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : t1001539/0001 Project Established
ICS : 75.080National Ref :Title : Petroleum products - Determination of sulphur - Bomb and lamp method Scope : This standard, covers the determination of total sulfur content of petroleum products by
bomb, lamp and turbidimetric methods.
Relatedness :National : NewInternational : Modified ASTM D1266:2013
Subsector : N03 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : t1001539/0001 Project Established
ICS : 75.080National Ref :Title : Petroleum products - Determination of sulphur - Bomb and lamp method Scope : This standard, covers the determination of total sulfur content of petroleum products by
bomb, lamp and turbidimetric methods.
Relatedness :
Page 37
National : NewInternational : Modified ASTM D129:2013
** End of Subsector **
Subsector N05: TEXTILES
Subsector : N05 Registration Date : 2018-02-02Organization : TSECountry : Turkey
Project ID : t1002793/0001 Project Established
ICS : 59.080.30National Ref :Title : Textiles - Woollen woven fabrics - For use in outerwear Scope : This standard specifies the description, classification and characteristics, sampling, inspection
and marketing of woollen woven fabrics for use in outerwear .
Relatedness :National : New
** End of Subsector **
Subsector N07: SAWN TIMBER
Subsector : N07 Registration Date : 2018-02-26Organization : AFNORCountry : France
Project ID : 00206940/0001 Project Established
ICS :National Ref : PR NF B54-500Title : Wood - Tool handles - Qualitative classification
Relatedness :National : New
** End of Subsector **
Subsector N11: WOOD-BASED PANELS
Subsector : N11 Registration Date : 2018-02-23Organization : BSICountry : United Kingdom
Project ID : 01800068/0001 Project Established
ICS :National Ref : BS 1088Title : Marine plywood. Requirements
Relatedness :National : New
** End of Subsector **
Subsector N14: PLASTICS PIPES
Page 38
Subsector : N14 Registration Date : 2018-02-19Organization : UNECountry : Spain Latest Date for Comments : 2018-03-21
Project ID : P0049632/0001 Draft for public enquiry
ICS :National Ref : PNE 53367-1:2014/1MTitle : Plastics. Plastics piping systems for water supply for irrigation. Part 1: Specifications for
polyethylene pipesScope : This part of the standard specifies characteristics and test methods for polyethylene (PE)
pipes for irrigation.
Relatedness :National : REV/AMD UNE 53367-1:2014
** End of Subsector **
** End of Sector **
Information procedure Page 39
Monthly Notifications Register
Notifications registered at CCMC from 2018-02-01 to 2018-02-28
Sector S : HEALTH, ENVIRONMENT AND MEDICAL EQUIPMENT
Register issued on : 2018-03-07
Page 40Subsector S01: ACOUSTICS AND SOUND INSULATION
Subsector : S01 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 00101044/0001 Project Established
ICS :National Ref : 00101044Title : Acoustical design for lifts
Relatedness :National : New
** End of Subsector **
Subsector S07: ANAESTHETIC AND RESPIRATORY EQUIPMENT
Subsector : S07 Registration Date : 2018-02-23Organization : BSICountry : United Kingdom
Project ID : 01800002/0001 Project Established
ICS :National Ref : BS 4272-4Title : Anaestheticandanalgesicmachines.Part4:Specificationforauxiliarygas
outlets and probes
Relatedness :National : New
** End of Subsector **
Subsector S08: AIR QUALITY
Subsector : S08 Registration Date : 2018-02-14Organization : TSECountry : Turkey
Project ID : t0122167/0001 Project Established
ICS : 13.040.35National Ref :Title : Microbial gel air filterScope : This standard covers microbial gel air filter
Relatedness :National : New
** End of Subsector **
Subsector S09: WATER QUALITY AND WATER SUPPLY
Subsector : S09 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 11904263/0001 Project Established
Page 41
ICS :National Ref : 11904263Title : Characterization of solids - Quality assurance and Quality control - Re-transferability of
measurement results to the characteristic distribution in the population
Relatedness :National : New
** End of Subsector **
Subsector S16: AIDS FOR THE DISABLED
Subsector : S16 Registration Date : 2018-02-19Organization : UNECountry : Spain Latest Date for Comments : 2018-03-31
Project ID : P0047073/0001 Draft for public enquiry
ICS :National Ref : PNE 153101 EXTitle : Easy to read. Guidelines and recommendations for the elaboration of documentsScope : This report specifies technical recommendations for the production , editing and validation
ofdocumentsineasilyreadtakingintoaccountthecriteriaofdesignforall.This report applies to the writings texts and documents, regardless of the format in which they are.
Relatedness :National : New
** End of Subsector **
Subsector S19: FIRST AID EQUIPMENT AND RESCUE SYSTEMS
Subsector : S19 Registration Date : 2018-02-21Organization : HZNCountry : Croatia
Project ID : 00580003/0001 Project Established
ICS : 11.160National Ref : rpHRN1112Title : First aid kit
Relatedness :National : New
Subsector : S19 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 06301886/0001 Project Established
ICS :National Ref : 06301886Title : First aid material - Case for first aid material; Amendment A1
Relatedness :National : New
Page 42
** End of Subsector **
Subsector S24: SOIL QUALITY
Subsector : S24 Registration Date : 2018-02-22Organization : PKNCountry : Poland
Project ID : 19201133/0001 Project Established
ICS : 13.080.01National Ref : prPN-Z-19012Title : Soil quality -- Determination of particle size distribution in mineral soil material -- Laser
diffraction methodScope : This standard specifies a method of determining the particle size distribution of earth
particles (< 2 mm) in mineral soil material by laser diffraction under laboratory conditions. This standard is not applicable to soils containing crumbs of calcium carbonate, because they dissolve in water causing instability in time of obtained results.
Relatedness :National : New
Subsector : S24 Registration Date : 2018-02-08Organization : NENCountry : Netherlands
Project ID : 50002062/0001 Project Established
ICS : 13.080.10National Ref : NEN 6950:2018 Concept nlTitle : Soil - Umbrella standard for determination of selected elements in soil, sediment and
sludgesScope : In this umbrellastandard matrix indications for the determination of selected elements in soil
are described. The application of the specific standards for which elements and in which situations is specified.
Relatedness :National : New
Subsector : S24 Registration Date : 2018-02-08Organization : NENCountry : Netherlands
Project ID : 50002063/0001 Project Established
ICS : 13.080.10National Ref : NEN 5739:2018 Concept nlTitle : Soil - Determination of free iron by atomic absorption spectrometryScope : This standard describes a method for the determination of free iron in soil samples. Free
iron is iron not compounded with a silicates matrix. It concerns amorphous as well as crystalline iron compounds. The standard is applicable to soil samples pretreated according to NEN 5751. This standard is developed to meet the requirements of NEN 5753 and NEN 5754.
Relatedness :National : New
Page 43
** End of Subsector **
Subsector S99: UNDETERMINED
Subsector : S99 Registration Date : 2018-02-28Organization : UNICountry : Italy
Project ID : 01604260/0001 Project Established
ICS : 13.100National Ref : UNI1604260Title : Adoption and effective implementation of the Organizations and Management Models
(MOG) of health and safety - Asseveration procedure in the construction and civil engineering sector
Scope : Legislative Decree 81/2008 and subsequent amendments has the power to release the affidavit on the adoption and effective implementation of the organization and management models of health and safety as declined in art. 30 of same legislative decree, and having the aim of preventing the crimes referred to the art. 25 septies of Legislative Decree 231/01 and subsequentamendments.This opportunity is up to the Joint Bodies constituted of associations of employers and workersbetweenthemostrepresentativesatnationallevel.However, the law does not give a resolution about the kind of requirements or procedures for the implementation of the affidavit activity, except for the one, provided for in paragraph 3b of art. 51 of the Decree 81, according to which "for the purposes referred to paragraph 3- bis, the joint bodies establish specific joint commissions, technically competent".Therefore, National Commission for Accident Prevention, Hygiene and the Working Environment (CNCPT) has promoted in UNI the declination of a standard affidavit path all over the national territory for construction companies through the drafting and publication ofUNI/PdR2:2013referencepractice.Furthermore, within the UNI framework, a technical report is being approved that regularly declaims the methods of affidavit of MOGs by Joint Bodies (UNI1601968 Project) aimed at makingtheprocessuniformforalltheproductionsectors.As the practice is near to its expiring date, the publication of a dedicated sectorial standard has been decided as the result of a public consultation inside standardization body. The standard will join a more complete framework including the new RT relative to project n. UNI1601968 almost completed.
Relatedness :National : New
Subsector : S99 Registration Date : 2018-02-13Organization : SIS Draft Issue Date : 2018-02-13Country : Sweden Latest Date for Comments : 2018-04-13
Project ID : 08760119/0001 Project Established
ICS : 11.140National Ref : 8760119Title : Health care textiles - Trouser for staff with leg cuff Scope : This standard includes requirements and design description for trouser for staff with leg cuff,
intended as a work piece for healthcare professionals. The garment is designed to suit both women and men.
Relatedness :
Information procedure Page 45
Monthly Notifications Register
Notifications registered at CCMC from 2018-02-01 to 2018-02-28
Sector T : TRANSPORT, MECHANICAL HANDLING AND PACKAGING
Register issued on : 2018-03-07
Page 46Subsector T01: SHIPBUILDING AND MARITIME STRUCTURES
Subsector : T01 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 13202651/0001 Project Established
ICS : 47.020.30National Ref : DIN 86004-2Title : Ships and marine technology - Corrosion preventing construction activities and
commissioning of pipelines - Part 2: Piping systems made of iron based alloys
Relatedness :National : New
Subsector : T01 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 13202988/0001 Project Established
ICS :National Ref : 13202988Title : Ships and marine technology - Graphical symbols for technical documentation - Part 4:
Sounding pipes, air pipes and filling pipes; Text in German and English
Relatedness :National : New
** End of Subsector **
Subsector T02: AEROSPACE
Subsector : T02 Registration Date : 2018-02-23Organization : BSICountry : United Kingdom
Project ID : 01800456/0001 Project Established
ICS :National Ref : BS XXXXTitle : Qualification and approval of UAS operatives
Relatedness :National : New
** End of Subsector **
Subsector T03: ROAD VEHICLES
Subsector : T03 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 05202783/0001 Project Established
ICS :National Ref : 05202783Title : Road vehicles - Air filters for passenger compartments - Part 2: Test for gaseous filtration
Page 47
Relatedness :National : New
Subsector : T03 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 05202784/0001 Project Established
ICS :National Ref : 05202784Title : Road vehicles - Air filters for passenger compartments - Part 3: PMx based filter
efficiency eff (PMx)
Relatedness :National : New
Subsector : T03 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 05202785/0001 Project Established
ICS :National Ref : 05202785Title : Road vehicles - Funeral vehicles - Requirements on load securing
Relatedness :National : New
Subsector : T03 Registration Date : 2018-02-16Organization : DINCountry : Germany
Project ID : 05202788/0001 Project Established
ICS :National Ref : 05202788Title : Road vehicles - Data parameter specification for body application units in commercial
vehicles
Relatedness :National : New
Subsector : T03 Registration Date : 2018-02-02Organization : TSECountry : Turkey
Project ID : t2000932/0001 Project Established
ICS : 43.060.20National Ref :Title : Air filter elements for internal combustion engines and compressors Scope : This standard, specifies the air filter elements used for cleaning inlet air of the internal
combustion engines and compressors for otomotive industries and industrial applications.
Page 48
Relatedness :National : NewEuropean : Modified DIN 73353:1977
** End of Subsector **
Subsector T14: PACKAGING
Subsector : T14 Registration Date : 2018-02-26Organization : AFNORCountry : France
Project ID : 00206938/0001 Project Established
ICS :National Ref : PR NF H34-012Title : XXXXXX
Relatedness :National : New
** End of Subsector **
Subsector T19: ROAD SAFETY
Subsector : T19 Registration Date : 2018-02-19Organization : UNECountry : Spain Latest Date for Comments : 2018-03-31
Project ID : P0049631/0001 Draft for public enquiry
ICS :National Ref : PNE 135352Title : Vertical signs and road delineators. "In situ" quality control. Characteristics and test
methods.Scope : This standard includes the description of the controls to be carried out "in situ" on the
elements of vertical signs and road delineators in service, to check their conservation status and visibility, as well as the test methodology that allows evaluating their characteristics. This standard is applicable to signs, panels, milestones, beacons and road studs in service. It is also applicable to studs and anchoring elements.
Relatedness :National : REV/AMD UNE 135352:2006
** End of Subsector **
** End of Sector **
Information procedure Page 49
Monthly Notifications Register
Notifications registered at CCMC from 2018-02-01 to 2018-02-28
Sector Z : INFORMATION TECHNOLOGY
Register issued on : 2018-03-07
Page 50Subsector Z99: UNDETERMINED
Subsector : Z99 Registration Date : 2018-02-28Organization : UNICountry : Italy
Project ID : 01604186/0001 Project Established
ICS : 35.240.80National Ref : UNI1604186Title : Health Informatics - Extension of EN ISO 13940 standard to social concepts.Scope : The main aim of the technical report is to develop a conceptual model that extends the
health concepts reported in the EN ISO 13940” System of concepts to support continuity of care” standard with those related to the social context. This model will represent the basis to define a standard, which facilitate the management of care pathways of an individual with the aim of making the information systems semantically interoperable considering both health, and social organizations that are involved in the provision of health and social integrated services.
Relatedness :National : New
Subsector : Z99 Registration Date : 2018-02-28Organization : UNICountry : Italy
Project ID : 01604188/0001 Project Established
ICS : 35.240.80National Ref : UNI1604188Title : Health Informatics - Architectural models for the development of integrated software
applications for healthcare.Scope : This technical report wants to provide a guide to support Public Administration and software
application providers in the healthcare sector, in order to promote the development of ecosystem-based software systems, consisting of models, services and platforms compliant tothemaininternationalhealthinformaticsstandards.The main objective is to address stakeholders in adopting a holistic and integrated paradigm of health, in contrast to the current one, based on monolithic, isolated and dedicated systems. The resulting documentation will allow users to have greater awareness of syntactic and semantic interoperability models, formalization of knowledge, management and control of health processes, analysis of large amount of data and personal data protection mechanisms.
Relatedness :National : New
** End of Subsector **
** End of Sector **
2011-06
List of non-electrotechnical subsectors
Sector A: Services
Subsector Title ISO/TC CEN/TC
reference reference
A01 Tourist services / 329; CEN/WS ETO
A02 Cleaning services / 328
A03 Postal services / 331
A04 Transportation services / 320; CEN/WS 016; CEN/WS SCUTUM
A05 Maintenance services / 319
A06 Building and construction services / 330
A07 Translation services /
A08 Funeral services / CEN/BT/TF 139
A09 Facility management / 348
A10 Services of Real Estate Agents / CEN/BT/TF 180; 373
A11 Security Services / CEN/BT/TF 167; 391; 384; 370; CEN/WS 044; CEN/CLC/TC 4
A12 Consultancy Services / 395; 381
A13 Expertise Services / 405
A14 Aesthetic Services / 403;409
A99 Undetermined / CEN/WS 002; CEN/WS 004; CEN/WS 037; CEN/WS 039; CEN/WS 041; CEN/WS 051; 375; 374; 376; 385; 404
Sector B: Building and construction
Subsector Title ISO/TC CEN/TC
reference reference
B01 Fire protection 21 70; 72; 191; 192
B02 Structures 59; 98 166; 167; 250; 277; 346; 349; 284; 288; 297; 340
B03 Concrete 71 104; CEN/WS 009
B04 Cement 74; 77 51
B05 Fire tests 92 127
B06 Gypsum / 241
B07 Glass 160 129
B08 Doors and windows 162 33
B09 Thermal matters 163 88; 89; 371; CEN/BT WG 173; CEN/WS 036
B10 Timber structures 165 124
B11 Metal structures 167 135
B12 Masonry 179; 196 125; 246
B13 Solar energy 180 312
B14 Geotechnics 182 341; 396
B15 Sanitary appliances / 163; 7
B16 Taps / /
B17 Lighting equipment and lighting / 50; 169 application technology
B18 Scaffolding / 53
B19 Ceramic tiles 189 67
B20 Drainage equipment / 165
B21 Baths / /
B22 Wallcoverings / 99
B23 District heating / 107
B24 Auxiliary and handicraft work / /
B25 Gas distribution installation and / 234; 235; 282 related equipment
B26 Road building and maintenance / 178; 227
B27 Waterproofing materials / 128; 254; 361; 314
B28 Floor coverings 38/SC 12 134
B29 Aggregates / 154
B30 Floor and surfacing / 217; 303; 323; 390
B31 Heating systems in buildings / 228; 247
B32 Precast concrete products / 177; 229
B33 Building design 205 315; 325; 388
B34 Building and construction – Environmental aspect 350; 351
B99 Undetermined / /
Sector C: Chemicals, chemical engineering and food products
Subsector Title ISO/TC CEN/TC
reference reference
C01 Food products 34 174; 275; 302; 360; 307; 327; 338; 387; CEN/WS 008; CEN/WS 018; CEN/WS 054
C02 Paints and related products 35 139; 298; 173
C03 Chemistry 47 317; 363
C04 Laboratory glassware 48 332
C05 Lac / /
C06 Essential oils 54 /
C08 Pesticides 81 /
C09 Surfactants 91 276
C10 Starch 93 /
C11 Tobacco 126 401
C12 Glass plant / /
C13 Fertilizers 134 223; 260
C16 Wood preservatives / /
C17 Trees and plants / /
C18 Adhesives / 193
C19 Chemical analysis 201; 202 382; 347
C20 Explosives and firework / 212; 321
C21 Cosmetics 217 392
C22 Bio-Based products / 411
C99 Undetermined / 386
Sector F: Fundamental standards
Subsector Title ISO/TC CEN/TC
reference reference
F01 Technical drawings 10 /
F02 Units & symbols 12 /
F03 Preferred numbers 19 /
F04 Sieves 24 /
F05 Measuring instruments 30; 113 92; 171; 176; 237;
294; 318; 244; 367; 141; CEN/WS 011
F06 Terminology principles 37 /
F07 Documentation and information 46 304; CEN/WS 024 CEN/WS 010 CEN/WS 023 CEN/WS 028 CEN/WS 014 CEN/WS 050 CEN/WS 006 368
F08 Surfaces / 290
F09 Banking 68 /
F10 Statistics 69 /
F12 Information processing systems 204 224; 225; 251; 278; CEN/WS CPF CEN/WS CIS CEN/WS ODR CEN/WS CID 287; 311; 365
F13 Environmental tests / /
F14 Graphical technology, 130 / sign-boards and nameplates
F15 Material testing in general 135 138; CEN/WS 007 CEN/WS 021 CEN/WS 033
F16 Graphical symbols 145 /
F17 Administrative documents 154 CEN/WS MMU
F18 Micrographics 171 /
F19 Optics 172; 187 123; 170
F20 Quality assurance 176 CEN/CLC/TC1 CEN/CLC/WG QS CEN/WS 030 362
F21 Value analysis and project / 279 network
F22 Logistics / 379; 273
F23 Energy 203 CEN/CLC/JWG 1; CEN/CLC/JWG 2;
Sector H: Products for household and leisure use
Subsector Title ISO/TC CEN/TC
reference reference
H01 Cinematography 36 372
H02 Photography 42 /
H03 Consumer questions / 291
H04 Sports equipment 83 136
H05 Oil and gas burners / 47; 131
H06 Horology 114 /
H07 Space heating 116 62; 110; 130; 179; 180
H08 Sizing systems 133; 137 /
H09 Furniture 136 207
H10 Sewing machines 148 /
H11 Heater controls 161 58
H12 Ceramic and glass-ware for food 166 /
H13 Jewellery 174 CEN/WS 047
H14 Caravans 177 245
H15 Toys 181 52
H17 Oil stoves / 46
H18 Central heating boilers / 48; 57; 109; 269
H19 Non-electric cookers and barbecues / 49; 281; 295
H22 Smokers’ lighters and matches / 355; 87
H23 Ladders / 93
H24 Tactile danger warnings / /
H25 Large gas appliances / 106; CEN/CLC/JWG FCGA
H26 Sealing materials / 108; 208
H27 Educational equipment / /
H28 Hunting 191 /
H29 Heat pumps / 113
H30 Equipment for children / 252
H31 Dedicated LPG appliances / 181
H32 Culinary utensils 186 194
H33 Footwear (excluding protective / 309 footwear)
H34 Child safety / CEN/BT/WG 117 398
H99 Undetermined / 299; 364; 369; 402
Sector I: Mechanical engineering
Subsector Title ISO/TC CEN/TC
reference reference
I01 Screw threads 1 /
I02 Fasteners 2 185
I03 Limits & fits / /
I04 Rolling bearings 4 /
I05 Iron pipes 5 203
I06 Pressure vessels 11 54
I07 Shafts 14 /
I08 Agricultural machines 23 144, 334
I09 Small tools 29 213
I10 Splines / /
I11 Machine tools 39 142; 143; 145; 255
I12 Pulleys & belts 41 188
I13 Gas containers 58 23; 286
I14 Gears 60 /
I15 Equipment for petroleum industry 67 12
I16 Internal combustion engines 70; 192 270
I17 Machinery in general 72; 199 114; 153; 214; 313 (including safety) 271, 337; 399; 397 CEN/WS 025
I18 Mining 82 196
I19 Nuclear energy 85 /
I20 Refrigeration 86 44; 182
I21 Chains and chain wheels 100 /
I22 Vacuum technology 112 /
I23 Pumps 115 197
I24 Industrial fans 117 356
I25 Compressors 118 232
I26 Plain bearings 123 /
I27 Earth moving and construction 127; 195 151 equipment
I28 Fluid power 131 /
I29 Gas cleaning / 195
I30 Air distribution / 156
I31 Valves 153; 185 69; 236; 105
I32 Flanges / 74
I33 Information processing in 184 310 automation
I34 Non-ferrous metallic pipes / /
I35 Leisure and recreational machines / 152
I36 Thermoprocessing technology / 186
I37 Printing and paper machines / 198
I38 Leather production, tannery and / 200; 201 related machinery
I39 Machines for metal processing / 202; 322
I40 Industrial piping networks / 267
I41 Membrane filters / 272
I42 Potentially explosive atmospheres / 305
I43 Hydrogen energy 197 /
I44 Nanotechnologies 229 352
I99 Undetermined / CEN/CLC/JTF PE; CEN/CLC/TC 2; 65, 157; CEN/WS 059
Sector M: Metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
M01 Steel 17 CEN/TC 342; 344; ECISS/TC 6 ECISS/TC 7 ECISS/TC 9 ECISS/TC 10 ECISS/TC 11 ECISS/TC 12 ECISS/TC 13 ECISS/TC 15 ECISS/TC 19 ECISS/TC 20 ECISS/TC 21 ECISS/TC 22 ECISS/TC 23 ECISS/TC 24 ECISS/TC 26 ECISS/TC 27 ECISS/TC 28 ECISS/TC 29 ECISS/TC 5 ECISS/TC 14 ECISS/TC 100 ECISS/TC 102 ECISS/TC 103 ECISS/TC 104 ECISS/TC 105 ECISS/TC 106 ECISS/TC 107 ECISS/TC 108 ECISS/TC 109 ECISS/TC 110
M02 Zinc / 209
M03 Foundry technology, 25 190; ECISS/TC 31 ECISS/TC 111 including cast iron
M04 Copper 26 133
M05 Welding 44 121
M06 Dimensions of wrought products / /
M07 Manganese and chromium 65 /
M08 Light alloys 79 132
M09 Iron ores 102 /
M10 Metallic coatings 107 240
M11 Powder metallurgy 119 /
M12 Aluminium ores 129 /
M13 Ferroalloys 132 /
M14 Nickel 155 /
M15 Metallic corrosion 156 262; 219
M16 Mechanical tests for metals 164 ECISS/TC 1 ECISS/TC 2 ECISS/TC 101
M17 Heavy metal ores 183 /
M18 Metal wire products / ECISS/TC 30; CEN/BT/TF 196; 378; 407
M20 Tin and tin alloys / 220
M21 Precious metals / 283
M22 Lead and lead alloys / 306
M99 Undetermined / /
Sector N: Non-metallic materials
Subsector Title ISO/TC CEN/TC
reference reference
N01 Paper and board 6 172
N02 Solid fuels 27 335; 343;383; CEN/WS 019
N03 Petroleum products 28 19; 336; CEN/WS 038; CEN/WS 061
N04 Refractories 33 187
N05 Textiles 38 189; 248
N06 Rubber 45 218; 366 CEN/WS 003
N07 Sawn timber 55 38; 175
N08 Mica / /
N09 Plastics 61 249
N10 Cork 87 /
N11 Wood-based panels 89 112
N12 Timber products 99 /
N13 Leather 120 289
N14 Plastics pipes 138 155
N17 Fluorspar 175 /
N18 Glass-fibre reinforced plastics / /
N19 Tapes / 253
N20 Ceramics 206 184
N21 Gaseous fuels and combustible gas 158; 193 238; 408
N22 Feather and related materials / 222
N23 Diamond / 410
N99 Undetermined / /
Sector S: Health, environment and medical equipment
Subsector Title ISO/TC CEN/TC
reference reference
S01 Acoustics and sound 43 126; 211 insulation
S02 Transfusion equipment 76 /
S03 Syringes 84 /
S04 Protective clothing and equipment 94 85; 158; 159; 160; 161; 162; CEN/WS 026; CEN/WS 043
S05 Dentistry 106 55
S06 Vibration & shock 108 231
S07 Anaesthetic and respiratory 121 215 equipment
S08 Air quality 146 137; 243; 264; CEN/CLC/JWG CMI
S09 Water quality and water supply 147 164; 230; CEN/WS 001 CEN/WS 034
S10 Surgical implants 150 285; CEN/CLC/JWG AIMD
S11 Contraceptives 157 /
S12 Gas analysis / /
S13 Ergonomics 159 122
S14 Prosthetics 168 /
S15 Surgical instruments 170 /
S16 Aids for the disabled 173 293
S17 Respiratory protective devices / 79
S18 Sterilization of equipment 198 102; 204
S19 First aid equipment and rescue systems / 239
S20 Waste collection, handling and / 183 transportation
S21 Laboratory medicine, clinical 194 140; 206; 233; pathology and biosafety 257; 258; 316; CEN/CLC/TC 3; CEN/WS 031; CEN/WS 053; CEN/WS 055
S22 Energy saving / CEN/WS 005 CEN/WS 015
S23 Personal & property protection against aggression/Burglary protection / 263
S24 Soil quality 190 345; CEN/WS 032
S25 Chemical disinfectants and / 216 antiseptics
S26 Environmental management 207 CEN/TC 406; CEN/WS 040
S27 Waste - Characterization, treatment / 292; 308; and streams CEN/BT/TF 120
S28 Demining / CEN/WS 029 CEN/WS 013
S99 Undetermined / 205; CEN/BT/TF 127 394; 259; 357; 358; 359; 380; 400; CEN/WS PCEC CEN/WS 012 CEN/WS 020
Sector T: Transport, mechanical handling and packaging
Subsector Title ISO/TC CEN/TC
reference reference
T01 Shipbuilding and maritime 8; 188 15; 300 structures
T02 Aerospace 20 274; AECMA; ECSS ;377
T03 Road vehicles 22 301; 326 CEN/WS IMA
T04 Tyres 31 /
T05 Pallets 51 /
T06 Metal and plastic containers 52 210; 221; 265; 266; 268; 296 393
T07 Glass containers 63 /
T08 Cranes 96 147
T09 Materials handling and 101 148; 149 storage equipment
T10 Freight containers 104 119; 280
T11 Steel wire ropes 105 /
T12 Industrial trucks 110 150; 324
T13 Lifting chains, hooks and ropes 111 168
T14 Packaging 122 261; 120
T15 Cycles 149 333
T16 Lifts & escalators 178 10; 242
T17 Builders hoists / /
T18 Elevating platforms / 98
T19 Road safety / 226; 339
T20 Tram- and railway engineering / 256; / CEN/CLC/WG FPR
T21 Packaging machines / 146
T22 Off-road vehicles / 354
T99 Undetermined / CEN/WS TAF
Sector Z: Information technology
Subsector Title ISO/TC CEN/TC
Z01 Radiocommunication for IT / /
Z02 Telephony, telegraphy for IT / CEN/CLC - ETSI
Z03 Common O.S.I. activities / CEN/CLC - EWOS
Z99 Undetermined / 353; CEN/WS ADN; CEN/WS AUT; CEN/WS BII; CEN/WS CAT; CEN/WS CST; CEN/WS CTC; CEN/WS DFA; CEN/WS DIR; CEN/WS DIS; CEN/WS DPA; CEN/WS DPP; CEN/WS EBE; CEN/WS ECH; CEN/WS ECO; CEN/WS EFI; CEN/WS EMD; CEN/WS ESI; CEN/WS ESR; CEN/WS EUR; CEN/WS FAS; CEN/WS FIN; CEN/WS FS2; CEN/WS FUN; CEN/WS GEN; CEN/WS HIC; CEN/WS ICT; CEN/WS IEC; CEN/WS IHM; CEN/WS INV2; CEN/WS ISD; CEN/WS JXF; CEN/WS KMA; CEN/WS LCT; CEN/WS LTS; CEN/WS MDC; CEN/WS MEE; CEN/WS MES; CEN/WS MET; CEN/WS MLX; CEN/WS MMI; CEN/WS NEA; CEN/WS NOM; CEN/WS ORC; CEN/WS POR; CEN/WS QIS; CEN/WS SAN; CEN/WS SCE; CEN/WS TEX; CEN/WS TWE; CEN/WS UDP; CEN/WS URI; CEN/WS WAC;