Post on 28-Jul-2015
Neurosurgery MTV – Minimally Invasive Trans-ilial Vertebral Blocking
An innovative procedure to manage degenerative lumbosacral stenosis (DLSS)
www.eickemeyer.com
Excellent Results
Minimally Invasive
MTV – the innovative, fast and safe surgery technique for DLSS in patients.
INNoVATIVe & sAFeMTV Implant set
Neurosurgery
Minimally Invasive
Partnering with innovative research and development companies alongside leading veterinary surgeons has helped develop the range of implants that you demand. The MTV implants highlights EICKEMEYER®‘s commitment to continuously evolve products to tackle orthopaedic challenges.
Clinical Indications
Degenerative lumbosacral stenosis, Neural foramen stenosis, Disc protrusion, Discospondylitis, Spondylosis
Neural Foramen and Nerve roots
Expansion of the neural foramen up to 240 %, leads to immediate decompression of the intervertebral disc.
Minimally Invasive Procedure
Straightforward and rapid surgical technique with high success rate in a large number of clinical cases.
Number of Clinical Cases
700 surgeries performed to date with over a 90 % success rate speaks for itself.
CT before MTV Implant, Neural Foramen Stenosis CT post MTV Implant, Neural Foramen Enlargement
*Müller, F. & Schenk, H.C. (2014, Nov.). CT-scan assessment of the effects of minimal invasive trans-ilial vertebral blocking procedure on L7-S1 interver-tebral foraminal area, endplate distance and lumbosacral angle. Abstractpresented at 20th annual meeting of Federation of European Companion Animal Veterinary Associations, Munich, Germany.
Minimally Invasive
Application of MTV Implant:
Step 1: Determine implant size by body weight
Step 2: Connect the MTV drill bit with drill attachment #1
Step 3: Incise and blunt dissect soft tissue (about 2 cm) for the insertion of the MTV drill bit into the target area
Step 4: Insert the MTV drill bit under fl uoroscopy until it penetrates the opposite body side
Step 5: Disconnect drill attachment #1
Step 6: Connect MTV implant with a socket wrench to drill attachment #2 and then onto the MTV drill bit, tightening with the combination wrench
Step 7: Insert the MTV implant with gentle force until it 'sits' in the correct location. Confi rm location with fl uoroscopy. Remove MTV drill bit and drill attachment #2 using combination wrench and locking nut
Step 8: Close wound and confi rm the implant location with X-ray / CT
APPLICATIoN oF MTV IMPLANTs
191200
MT V Implant setCoMPoNeNTs
Neurosurgery
The following components are included in the MTV Implant Set for surgical use in minimally invasive trans-ilial vertebral blocking. All these accessories are of the highest quality.
MTV IMPLANT soCKeT WreNCH
MTV IMPLANTCoMBINATIoN WreNCH
Combination wrench (pair) for drill guide, drill attachments and socket wrench
191205
MTV IMPLANT6 sIZes, 9 IMPLANTs
The implant has distal and proximally located threads and a conical head. The remainder of the implant is non-threaded
191210 – 191215
Socket wrench for locking nut
Use with #2 drill guide – AO quick coupling attachment
191204
DrILL BIT ATTACHMeNTAo QuICK CouPLINg #2
Drill guide – AO quick coupling attachment for MTV implants insertion
Use with socket wrench
191203
DrILL BIT ATTACHMeNT QuICK CouPLINg #1
Drill guide – AO quick coupling attachment for MTV implant insertion
191202
MTV IMPLANT DrILL BIT
Drill bit for MTV implants
191201
MTV IMPLANTLoCKINg NuT
Locking nut for implant removal
191206
MTV IMPLANTDePTH gAuge
Depth gauge for determining MTV implant length
191207
PreMIuM INsTruMeNTAND IMPLANT BoX
Perforated base and lid, dimensions (cm): L 29 x W 13.5 x H 9
500801
EICKEMEYER® | Eltastraße 8 | 78532 Tuttlingen | Germany | T +49 7461 9658055 | F +49 7461 96 580 91 | E export@eickemeyer.com | www.eickemeyer.com