ICHMM2008 Academic Program Session a1: Special and unique...

ICHMM2008 Academic Program

Session a1: Special and unique properties at nanoscale (1) June 4 (wed), 8:00-10:00, Room 1 Co-Chairs: William Curtin, Brown University, USA Yueguang Wei, Institute of Mechanics, Chenese Academy of Science A-1: Keynote talk 8:00-8:30 Polymorphism of Zinc Oxide Nanowires

A.J. Kulkarni1, J. Wang2, K. Sarasamak3, S. Limpijumnong3, F.J. Ke2 and M. Zhou1, 1School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA 30332-0405, USA; 2Department of Physics, Beihang University, Beijing 100083, China; 3School of Physics, Suranaree University of Technology and National Synchrotron Research Center, Nakhon Ratchasima 30000, Thailand; Email: min.zhou@gatech.edu

A-11: Invited talk 8:30-8:55 Molecular Dynamics (MD) Simulations of Uniaxial Tension and Compression Tests on Hexagonal Prism [111] -SiC Nanowires

Tong-Yi Zhang*, Miao Luo, and Wing Kin Chan, Department of Mechanical Engineering, Hong Kong University of Science and Technology, Clear Water Bay, Kowloon, Hong Kong, China, Email: mezhangt@ust.hk

A-8: Invited talk 8:55-9:20 Surface Stress Effects on the Resonant Properties of Metal Nanowires: The Importance of Finite Deformation Kinematics and the Impact of the Residual Surface Stress

Harold S. Park1*, Patrick A. Klein2, 1Department of Mechanical Engineering, University of Colorado, Boulder CO 80302, USA; 2Franklin Templeton Investments, San Mateo, CA 94403, Email: Harold.park@colorado.edu

Comprehensive presentation AC-1 9:20-9:24 A-16 Molecular Mechanics Simulation of Deformation Behavior under Uniaxial Tension in POSS Nanocomposite

F.L. Zeng1*, Y. Sun1, Y. Zhou2, 1Department of Astronautic Science and Mechanics, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China; 2Material Science and Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China; Email: zengfanlin@hit.edu.cn

AC-2 9:24-9:28 A-23 Molecular Dynamics Simulation for Ideal Strength and Elastic Modulus of SiC associated with Temperature and Vacancy Defects Chao Wang1*, Jun Liang 2, Yang Liu3, 1Center for Composite Materials, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China, Email: cici1982@hit.edu.cn

AC-3 9:28-9:32 A-54 Analysis of carbon nanotube-based nanobalance using the chemical bond element method

J.N. Lv, H.B. Chen*, Department of Modern Mechanics, University of Science and Technology of China, Hefei 230027, P. R. China, Email: hbchen@ustc.edu.cn

9:32-10:00 Discussion a1: What impact can atomistic simulations bring to discovery of new phenomena and new materials with desired behavior?

Session a2: Special and unique properties at nanoscale (2) June 4 (wed), 13:30-15:30, Room 1 Co-Chairs: T. C. Wang, Institute of Mechanics, Chinese Academy of Sciene M. A. Zikry, North Carolina State University, USA

A-34: Invited talk 13:30-13:55 Microstructural Modeling of Failure Mechanisms and Grain-Boundary Effects in Crystalline Aggregates

Jibin Shi, M.A. Zikry, T. M. Hatem, Department of Mechanical and AerospaceEngineering, North Carolina State University, Raleigh, NC 27695-7910, Email: zikry@ncsu.edu

A-3: Invited talk 13:55-14:20 Size and temperature dependence of the low-dimensional solid state elasticity: local bond average

Y. Pan, Z.F. Zhou, Y.C. Zhou* and C.Q. Sun, Key laboratory of low-dimensional materials and application technologies (Ministry of Education), Xiangtan University, Hunan Province, 411105, Email: zhouyc@xtu.edu.cn

A-13: 14:20-14:40 Monitoring quantum dot growth by in-situ cantilever systems H.L. Duan1,2*, Y. Wang2, X. Yi2, 1Institute of Nanotechnology, Forschungszentrum Karlsruhe, Postbox 3640, Karlsruhe, 76021, Germany; 2College of Engineering, Peking University, Beijing, 100871, P. R. China; Email: huiling.duan@int.fzk.de; hlduan@pku.edu.cn

A-15: 14:40-15:00 A new method to analyse the Peierls-Nabarro model of an edge dislocation in a rectangular plate

D.B. Zhang, T.C. Wang*, Y.G. Wei, LNM, Institution of Mechanics, Chinese Academy of Sciences, Beijing100080, China; Email: tcwang@imech.ac.cn

15:00-15:30 Session Discussion a2: What impact can atomistic simulations bring to discovery of new phenomena and new materials with desired behavior?

Session a3: Special and unique properties at nanoscale (3) June 6 (Friday), 8:00-10:00, Room 1 Co-Chairs: Y. Huang, Northwestern University Tong-Yi Zhang, Hong Kong University of Science and Technology A-42: Invited talk 8:25-8:50 Role of micro-structural heterogeneity in determining mechanical properties of nano-scale metals

Taher Saif, Mechanical Science and Engineering University of Illinois at Urbana-Champaign Urbana, IL 61822, USA, Email: saif@uiuc.edu

A-46: 8:50-9:10 Recent Advances on the Effect of Nanoclay on the Properties of Epoxies and Fiber Reinforced Polymer Composites Mahesh Hosur1, Farhan Chowdhury, Orion Gebremedhin, Shaik Jeelani, Center for Advanced Materials,

Tuskegee University, Tuskegee, AL 36088; Email: mhosur@gmail.com A-48: 9:10-9:30 The Possible Topologies and Axial Tensile Modulus of Super Carbon Nanotube

Y.L. Chen*, Y.J. Yin, B. Liu, K.C. Hang, Department of Engineering Mechanics,Tsinghua University, 100084, Beijing, China; Email: chenyuli03@mails.thu.edu.cn

9:30-10:00: Discussion: What impact can atomistic simulations bring to discovery of new phenomena and new materials with desired behavior? – Contributions from the following posters(3) Poster presentation of Session a B-1: Atomistic modeling size dependence of nano-voided copper yielding under uniaxial tension

K.J. Zhao*, C. Chen, MOE Key Laboratory for Strength and Vibration, Xi’an Jiaotong University, China, Email: kejie@mail.xjtu.edu.cn

B-31: Molecular Dynamics Studies of Brittle Fracture of SiO2 L.P. Cui*, Q.H. Tang, 1State Key Laboratory of Nonlinear Mechanics, Chinese Academy of Sciences, Beijing 100080, China; Email: cuilip@lnm.imech.ac.cn

A-14: Phase Diagram Calculation of GaN1-xPx Ternary Alloys with A Content Gradual Change Model K.X. Zhang*, J.N. Zhang, J.P. Song, J.W. Wu, W. H. Zhu, J.W. Lin, College of Science, HoHai University, Nanjing, 210098, P.R. China; Email: kxzhang@hhu.edu.cn

A-27: Multi-scale numerical simulation for the effective mechanical properties of Carbon Nano-tube reinforced composites with nano-microscopic interfaces

D.M. Luo1, Y.L. Zhou2, W.X. Wang3, 1Environment and Civil Engineering School, Foshan University, Foshan, 528000, China; 2Mechatronics and Information Engineering School, Foshan University, Foshan, 528000, China; 3Research Institute for Applied Mechanics, Kyushu University, Japan, 816-8580; Email: dmluo@fosu.edu.cn

A-29: Flow stress and Young’s modulus of Ni films in nanoindentation creep Z.S. Ma, S.G. Long*, Y. Pan, Y.C. Zhou, Key Laboratory of Low Dimensional Materials & Application Technology of Ministry of Education and Faculty of Materials, Optoelectronics and Physics, Xiangtan university, Xiangtan 411105 China, Email: mazengsheng@gmail.com

A-41: Study on the Microfailure Mechanism for Granite Failure Surface at Different Temperature Xiao-li Xu, Feng Gao, Xiao-ming Shen, He-ping Xie, School of Science, China University of Mining & Technology, Xuzhou, Jiangsu221008, Email: xuxiaoli2002_ren@163.com

A-47: Investigation of the Mechanical Behavior of the Carbon Nanotubes Coated Copper Composite Materials

Tiefeng Li, Shaoxing Qu, Zhenhua Li, Department of Engineering Mechanics, Zhejiang university, Hangzhou, Zhejiang, 310027 China; Email: 10724005@gstu.zju.edu.cn

A-49: Simulation and Verification Valuation of the Laser Processing of Three-dimensional Components iIn Micro-nano Scale

Yun Wang*, Tao Huang, XiaoWang, Chuangyu Gao, Ming Zhou, Lan Cai, Yun Wang*, XiaoWang, Chuangyu Gao, Lan Cai, School of Mechanical Engineering, Tao Huang, Ming Zhou, School of Material Science and Engineering, Jiangsu University, Zhenjiang 212013, China, Email: wangyun@ujs.edu.cn

Session a4: Special and unique material properties at nanoscale (4) June 6 (Friday), 10:20-12:00, Room 1 Co-Chairs: Zhong Lin (ZL) Wang, Georgia Institute of Technology, USA Takayuki Kitamura, Kyoto University, Japan Keynote talk 10:20-10:50 Mechanics of Stretchable Electronics Y. Huang, Northwestern University, USA, Email:y-huang@northwestern.edu A-7: 10:50-11:10 Asymptotic derivation of a general piezoelectric interface mode

S.T. Gu, Q.C. He*, V. Pensée, Université Paris-Est, Laboratoire de Modélisation et Simulatio Multi Echelle, FRE3160, CNRS, 5 Boulevard Descartes, 77454 Marne-la-Vallée Cedex 2, France, Email: he@univ-mlv.fr

A-9: 11:10-11:30 Effect of Confined Plasticity on Interface Fracture in Nano-Components H. Hirakata1*, Y. Takahashi2, T. Kitamura3, IDepartment of Mechanical Engineering,Osaka University, Suita, Osaka 565-0871, Japan; 2Research Center for Hydrogen Industrial Use and Storage, National Institute of Advanced Industrial Science and Technology, Fukuoka 819-0395, Japan, 3Department of Mechanical Engineering and Science, Kyoto University, Kyoto 606-8501, Japan, Email: hirakata@mech.eng.osaka-u.ac.jp

11:30-12:00: Discussion a3: What impact can atomistic simulations bring to discovery of new phenomena and new materials with desired behavior? – Contributions from the following posters(3)

Session b1: Microscopic behavior and microstructural heterogeneities (1) June 4 (wed), 15:50-18:00, Room 1 Co-Chairs: Zheng Zhong, Tongji University

Y. T. Pei, Univ. of Groningen, Netherlands A-56: Keynote talk 15:50-16:20 Microstructural Heterogeneities Induced by Deformation Prior to Thermal Recrystallisation in Polycrystalline Aggregates

E.P. Busso, G. Abrivard, G. Cailletaud and S. Forest, Centre des Matériaux, Mines Paris-ParisTech, CNRS-UMR 7633, B.P. 87, F-91003 Evry, France, Email: Esteban.Busso@ensmp.fr

H-17: 16:20-16:40 Micromechanics method to simulate morphological evolution of precipitates in Ni-based superalloys Wen-ping Wu*, Ya-fang Guo, Yue-sheng Wang, Institute of Engineering Mechanics, Beijing Jiaotong

University, Beijing, 100044, China, Email: wpwubjtu@126.com A-50: 16:40-17:00 Probing Viscoelastic Profile of Molecular Layers on Solid-Liquid Interfaces

J.J. Fang1, D.M. Zhu1,2*, Jiajie Fang, 1Department of Modern Physics, University of Science and Technology of China, Hefei, Anhui 230026, China; 2Department of Physics, University of Missouri-Kansas City, Kansas City, Missouri 64110, USA, Email: ZhuD@umkc.edu

A-51: 17:00-17:20 Size-dependence stress field of an infinite matrix with a nanosized spheroidal inhomogeneity under hydrostatic loading

Z.Y. Ou, L.S. Ma, D.X. Lei, School of Science, Lanzhou University of Technology, Lanzhou 730050, China; E-mail: ouzy@mail.xjtu.edu.cn

A-40: 17:20-17:40 The effects of Capillary force in Micro or Nano-indentation S.H. Chen1*, C.H. Mi1, A.K. Soh2, 1LNM, Institute of Mechanics, Chinese Academy of Sciences, Beijing, 100080, China; 2Department of Mechanical Engineering, The University of Hong Kong, Hong, Email: shchen@lnm.imech.ac.cn

17:40-18:00 Discussion b1: What impact can microstructure-scale simulation bring to discovery of new phenomena and new materials with desired behavior? (1)

Session b2: Microscopic behavior and microstructural heterogeneities (2) June 5 (Thursday), 8:00-10:00, Room 1 Co-Chairs: Xiaojing Zheng, Lanzhou University

Taher Saif, University of Illinois at Urbana-Champaign Urbana, USA A-24: Keynote talk 8:00-8:30 Investigations of cohesive zone properties of the interface between metal film and ceramic substrate at nano- and micro-scales

Yueguang Wei*, Xuemei You, and Haifeng Zhao, State-Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Science, Beijing 100080, PR China, Email: Ywei@LNM.imech.ac.cn

A-53: Invited talk 8:25-8:50 Heterogeneous Grain Boundary Effect to Displacement Bursts of Nanoindentation

Y. Shibutani1*, Y. Nakahama1, 1Department of Mechanical Engineering, Osaka University, Suita, Osaka 565-0871, Japan, Email: sibutani@mech.eng.osaka-u.ac.jp

G-19: 8:50- 9:10 A Micro-Macro Analysis for the Magnetomechanical Behavior of MRFs X Peng*, H. Li, H.W. Zheng, Department of Engineering Mechanics, Chongqing University, Chongqing, 400044, China, Email:xhpeng@cqu.edu.cn

A-43: 9:10-9:30 Micro-mechanics of high porosity particle-polymer composites P. Alam*1, S. Mathur1, T. Byholm1, O. Järvinen1, J. Kniivilä1 and M. Toivakka1, 1Laboratory of Paper Coating and Converting, Department of Chemical Engineering, Åbo Akademi University, Turku, Finland, Email: Parvez.Alam@abo.fi

Comprehensive presentation AC-4 9:30-9:34 A-20 Micromechanical Damage Model for Rocks and Concretes under Tensile and Shear Loadings

Z.J. Ren, X.H. Peng, Department of Engineering Mechanics, Chongqing University, Chongqing 400044, China, Email: sea1800@sina.com

AC-5 9:34-9:38 A-17 A Microstructure-Based Analysis for Cyclic Plasticity of Pearlitic Steels X.S. Long*, X. H. Peng, W.L. Pi, Department of Engineering Mechanics，Chongqing University, Chongqing, 400044, China; Email: longxs2000@sina.com

9:38-10:00 Discussion b2: What impact can microstructure-scale simulation bring to discovery of new phenomena and new materials with desired behavior?

Session c1: Surface and interface behavior (1): nanoscale June 4 (wed), 10:20-12:20, Room 1 Co-Chairs: H. Zbib, Washington State University, USA Jinghong Fan, Alfred University and Chongqing University A-6: Invited talk 10:20-10:45 Strength of Low-Dimensional Nano-Structure

Takayuki Kitamura1*,Takashi Sumigawa1, Hiroyuki Hirakata2, 1Department of Mechanical Engineering and Science, Kyoto University, Kyoto 606-8501, Japan; 2Department of Mechanical Engineering, Osaka University, Suita, Osaka 565-0871, Japan; Email: kitamura@kues.kyoto-u.ac.jp

Q-6: Invited talk 10:45-11:10 Interfacial Excess Energy, Excess Stress and Excess Strain in Elastic Solids

Rémi Dingreville, Jianmin Qu*, School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA, USA, Email: jq@gatech.edu

A-10: 11:10-11:30 Theoretical Analysis of the Spontaneous Surface Instability for Thin Soft Elastic Films

Xi-Qiao Feng, Shi-Qing Huang, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China; Email: fengxq@tsinghua.edu.cn

Comprehensive presentation AC-7: 11:30-11:34: A-30 A model investigation of the performance of a novel anode flow-field structure with microblocks for Micro Direct Methanol Fuel Cells

Y.A. Zhou1*, X.H. Wang1*, Q. Zhang1, L.Y. Zhong1, L.T. Liu1, 1Institute of Microelectronics, Tsinghua University, Beijing 100084, China, Email: wxh-ime@mail.tsinghua.edu.cn

11:34-12:20 Session Discussion c1: What is the impact of the large ratio of surface to volume at the nanoscale on material behavior and nano-technology development?

Session c2: Surface and interface behavior (2): coatings and thin layers June 4 (Wed), 15:50-18:00, Room 4 Co-Chairs: Alan Cocks, Oxford University, UK Z. Zhuang, Tsinghua University B-24: Invited talk 15:50-16:15 Sintering and Mud-cracking in Thermal Barrier Coatings

Alan C.F. Cocks*, Kumar Shanmugam, Department of Engineering Science, University of Oxford, Parks Road, Oxford, OX1 3PJ, UK, Email: alan.cocks@eng.ox.ac.uk

L-14: Invited Talk 16:15-16:40 The characterization of interface adhesion of dissimilar elastic-plastic materials by a pressurized blister test modeling

L.M. Jiang1,2, Y.C. Zhou1,2*, Y.G. Liao1,2, C.Q. Sun1,3, Key Laboratory of Low Dimensional Materials and Application Technology of Ministry of Education, Xiangtan University, Hunan 411105, China; Email: zhouyc@xtu.edu.cn

M-2: 16:40-17:00 Analysis of Fatigue Crack Initiation Cause for Freight Wheel Plate Hole H.X. Zheng1*, Z.H. Zhang1, X.C. Ping2, J.L. Xie3, 1School of Transportation, Ludong University, Yantai, Shandong 264025, China; 2School of Mechanical and Electronical Engineering, East China Jiaotong University, Nanchang, Jiangxi 330013, China; 3School of Mechanical and Electric Control Engineering, Beijing Jiaotong University, Beijing 100044, China; Email: hongxiazheng@163.com

M-8: 17:00-17:20 Surface Structures on Cleaved Silicon by Cleavage Luminescence Detection D. Li*, School of Computer and Information Science, Edith Cowan University, Australia, Email: d.li@ecu.edu.au

G-4: 17:20-17:40 Effect of Micro-voids on Phase Transformation in a NiTi-alloy

FP By: J.S. Olsen*, Z.L. Zhang, C. van der Eijk, Department of Structural Engineering, Norwegian University of Science and Technology (NTNU),N-7491 Trondheim, Norway, Email: Jim.Stian.Olsen@ntnu.no

E-8: 17:42-17:46 Thermal stability of CrAlSiN Coating by Cathodic Arc Deposition with Rotating Cathodes

Wei-Yu Ho1*, Chi-Lung Chang1, Da-Yung Wang1, Woei-Yun Ho2, 1Department of Materials science and engineering, MingDao University, Taiwan; 2Department of Applied Physics, National Ping Tung University of Education, Taiwan, Email: weiyuho@mdu.edu.tw

17:46-18:00 Discussion c2: What mechanisms, process parameters, and layer thicknesses affect coating strength, mechanical behavior, and corrosion resistance? Poster presentation of Session c M-1: Simulating 3D Surface Crack by Finite Element Techniques based on Marc

S.X. Zhou1*, J.L. Xie1, Q.F.Liu2, Y.Y. Xie1, 1Laboratory for Structural Strength Testing(Beijing Jiaotong University), China National Accreditation Service for Conformity Assessment, School of Mechanical and Electronic Control Engineering, Beijing Jiaotong University, Beijing 100044，China; 2Navy Logistic Tech.& Equipment Institute of PLA, Beijing 100072, China Email: sxzhou1971@163.com

M-3: Experimental observation and mechanism analysis of the shear failure near the impact interface for polypropylene under Combined Compression and Shear shock Loading

Ting Li*, Zhiping Tang, Key Laboratory for Mechanical Behavior and Design of Materials (LMBD), Department of Modern Mechanics, University of Science and Technology of China, Hefei, 230026, China, Email: xjliting@mail.ustc.edu.cn

Session d1: Fatigue testing and simulation (1) June 4 (Wed), 8:00-10:00, Room 5 Co-Chairs: David L. McDowell, Georgia Institute of Technology, USA Y. S. Hong, Institute of Mechanics, Chinese Academy of Science L-47: invited talk 8:00-8:25 The Applicability of Macroscopic Continuum Mechanics to Fatigue Life Prediction

Yanyao Jiang*, University of Nevada, Reno, Department of Mechanical Engineering (312), Reno, NV 89557, Email: yjiang@unr.edu

L-54: 8:25-8:45 Evaluation of the Fatigue Properties of Bituminous Binders Using a New Type of Specimen

Q.T. Liu*, S.P. Wu, C.H. Liu, Y. Xiao, Key Laboratory of Silicate Materials Science and Engineering of Ministry of Education, Wuhan University of Technology, Wuhan 430070, China ,Email: liuqt@whut.edu.cn

L-77: 8:45-9:05 Cumulation of damage in low cycle fatigue and gigacycle fatigue Zhiyong Huang, Danièle Wagner, Claude Bathias, University Paris X, LEEE, Ville d’Avray, France, Email: zhiyong.huang@u-paris10.fr

L-73: 9:05-9:25 Fatigue crack growth and closure behavior of embedded cracks Rahi Chermahini, Mobarakeh Steel Company, Email: rgcher@yahoo.com

L-32: 9:25-9:45 Thermal Analysis for a Crack Problem in a Functionally Graded Layered Structure L.C. Guo*, H.J. Yu, Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China, Email: guolc@hit.edu.cn

Comprehensive presentation LC-2: 9:45-9:49: L-28 Fatigue Reliability Evaluation of Welded Frame of Four-axle Wagon Bogie

G.X. Yang, J.L. Xie, S.X. Zhou, Laboratory for Structural Strength Testing(Beijing Jiaotong University), China National Accreditation Service for Conformity Assessment; Engineering Research Center of Structure Reliability and Operation Measurement Technology of Rail Guided Vehicles(Beijing Jiaotong University), Ministry of Education, Beijing 100044, China, Email: xueyang001@tom.com

9:49-10:20 Discussions d1: What are the multiple goals of fatigue modeling using multiscale and microstructure-based simulations, and how do they differ in terms of demand on simulations?

Session d2: Fatigue testing and simulation (2) June 4 (wed), 10:20-12:20, Room 5 Co-Chairs: E. P. Chen, Sandia National Laboratories Livermore, USA Z. P. Tang, Univ. of Science and Technology of China 10:20-10:45 Invited talk Lengthscale, orientation and morphology effects in fatigue crack nucleation in polycrystals

F. P. E. Dunne1*, D. Rugg2, 1Department of Engineering Science, Oxford University, Oxford, OX1 3PJ, England; 2Rolls-Royce plc, Elton Road, Derby, DE24 8BJ, England, Email: fionn.dunne@eng.ox.ac.u

L-74: 10:45-11:05 Thermal Effect of Fatigue Strength for FRP/Metal Adhesive Joints T.Hattori*, Department of Mechanical and Systems Engineering, Gifu University, Gifu City, Gifu, Japan, Email: hattori@gifu-u.ac.jp

L-49: 11:05- 11:25 Experimental Investigation of Very-High-Cycle-Fatigue Behavior for a Structural Steel

G.A. Qian*, Y.S. Hong1, State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, China, Email: qga@lnm.imech.ac.cn

L-48: 11:25-11:45 Mechanical and Low-cycle Fatigue Behaviors of Dispersion Strengthened Copper GlidCop

H.B. Chen1*, J.H. Liu1, X.H. Si1, J.F. Jin1, N.X. Wang2, 1CAS Key Laboratory Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China, Hefei, Anhui 230026, China; 2Shanghai Institute of Applied Physics, CAS, Shanghai 201800, China, Email: hbchen@ustc.edu.cn

Comprehensive presentation LC-3: 11:45-11:49: L-2 Microstructure-Sensitive Modeling of High Cycle Fatigue

Craig Przybyla1, Nima Salageheh2, Rajesh Prasannavenkatesan2, and David L. McDowell1, 2, 1School of Materials Science and Engineering; 2G.W. Woodruff School of Mechanical Engineering Georgia Institute of Technology, Atlanta, GA 30332-0405, Email: david.mcdowell@me.gatech.edu

LC-4: 11:49-11:53: L-64 High Cycle Fatigue Properties of an AA2524 Aluminum Alloy in Four-Point Bend T. Zhai1*, T. LI3, Zhiguo Chen2, Ziqiao Zheng2, X.P. Jiang1, Q.Y. Wang3, 1Dept. of Chemical and Materials Engineering, University of Kentucky, KY 40506, USA; 2School of Materials Science and Engineering, Central South University, Changsha, Hunan 410083, China; 3Department of Mechanical, Sichuan University, Chengdu, Sichuan 610065, China, Email: tzhai@engr.uky.edu

11:53-12:20 Discussions d2: What are the multiple goals of fatigue modeling using multiscale and microstructure-based simulations, and how do they differ in terms of demand on simulations

Session d3: Fatigue testing and simulation (3)

June 5 (Th), 10:20-12:20, Room 1

Co-Chairs: Yanyao Jiang, University of Nevada, USA Wenli Pi, ChongQing University L-62: invited talk 10:20-10:45 Prediction of fatigue life in notched bodies

J. Polák1, T. Kruml1*, M. Petrenec1, K. Obrtlík1, O. Kotecký1, S. Degallaix2, 1Institute of Physics of Materials, Academy of Sciences of the Czech Republic,Žižkova 22, 616 62 Brno, Czech Republic; 2Laboratoire de Mécanique de Lille (LML. UMR CNRS 8107), Ecole Centrale de Lille, BP 48, 59651 Villeneuve d’Ascq Cedex, France, Email: kruml@ipm.cz

B-34: 10:45-11:05 Investigation of fatigue mechanical properties of a polycrystalline solid at mesoscopic scale using depth-sensing indentation (DSI) technique

Duyi Ye*, Maoyun Li, Institute for Chemical Mechanical Engineering, Zhejiang University, Zheda Road 38, Hangzhou 310027, P. R. China, Email: duyi_ye@zju.edu.cn

G-27: 11:05-11:25 Electric Fatigue in Ceramic-Polymer Composite Film under Cyclic Electric Field F. Fang*, W. Yang, M.Z. Zhang, Z. Wang, Failure Mechanics Laboratory, School of Aerospace, Tsinghua University, Beijing 100084, China, Email: fangf@mail.tsinghua.edu.cn

F-15: invited talk 11:25-11:50 Fatigue Based Design of Biomedical Implant Materials A. Srivastav, Professor & Director, College of Engineering & Technology, IFTM, Moradabad, India, Email: sri_anupam2003@yahoo.co.in

11:50-12:20: Discussion d3: What are the multiple goals of fatigue modeling using multiscale and microstructure-based simulations, and how do they differ in terms of demand on simulations?

Session e1: Damage and failure (1) June 4 (Wed), 13:30-15:30, Room 5 Co-Chairs: Q. P. Sun, Hong Kong University of Science and Technology C. W. Wu, Dalian University of Technology L-84: 13:30-13:50 Analysis of the cyclic stress in Inconel 738LC superalloy at elevated temperature

M. Petrenec1*, J. Polák1, K. Obrtlík1, 1Institute of Physics of Materials, Academy of Sciences of the

Czech Republic, Žižkova 22, 616 62 Brno, Czech Republic, Email: petrenec@ipm.cz

L-17: 13:50-14:10 Study of the hydro-fracturing processes in heterogeneous rocks using an elasto-plastic cellular automaton

P.Z. Pan1*, X.T. Feng1, H. Zhou1, State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, Hubei, 430071, China; Email: pzpan@whrsm.ac.cn

L-65: 14:10-14:30 Study of damage process using self-consistent elastoplastic model A. Baczmański1, M. François2, B. Panicaud2*, K. Saanouni2, N. Hfaiedh2, K. Wierzbanowski1, 1Faculty of Physics and Applied Computer Science, AGH- University of Science and Technology, al. Mickiewicza 30, 30-059 Kraków, Poland; 2LASMIS, Universite de Technologie de Troyes, 11 rue Marie Curie, B.P. 2060, 10010 Troyes, France, Email: benoit.panicaud@utt.fr

L-10: 14:30-14:50 Computing Lower and Upper Bounds for J-integral in Functionally Graded Material

Z.C. Xuan*, Y. Fantahun, Z.F. Zhou, Department of Computer Science, Tianjin University of Technology and Education, Tianjin 300222, China, Email: xuanzc@tute.edu.cn

Comprehensive presentation LC-1 14:50-14:54 L-81 Experimental Study on CT Creep Characteristics of Oil Shale under Impacting Disturbance

Zhiliang Fu1*, 1Key Laboratory of Ministry of Education Co-sponsored by Province and Ministry Laboratory of Safety and High Efficient Coal Mining, School of Energy & Safety, Anhui University of Science & Technology, Huainan, Anhui 232001, China, Email: fuzhiliang2007@yahoo.com.cn

14:54-15:30: Discussion e1: How does material damage and failure originate from atomic and microscopic origins and how can multiscale analysis and nano-scale tests assist in modeling?

Session e2: Damage and failure (2) June 4 (wed), 15:50-18:00, Room 5 Co-Chairs: E. Schlangen, Delft University of Technology, Netherlands J. L. Yu, University of Science and Technology of China Q-14: 15:50-16:20 keynote talk, Fracture and failure modelling activities at Sandia/California: an overview

E.P. Chen, Mechanics of Materials Department Sandia National Laboratories Livermore, California, USA, Email: epchen@sandia.gov

L-21: invited speed 16:20-16:40 Fracture and Damage in Woven GFRP Laminates at Cryogenic Temperatures

Y. Shindo*, T. Takeda, F. Narita, Department of Materials Processing, Graduate School of Engineering, Tohoku University, Aoba-yama 6-6-02, Sendai 980-8579, Japan; Email: shindo@material.tohoku.ac.jp

L-87: 16:40-17:00 Elastoplastic Phase Field Model for Time-dependent Hydrogen Diffusion, Hydride Precipitation and Fracture Initiation at Notch and Crack Tips in Metals

By:S.Q. Shi, Department of Mechanical Engineering, The Hong Kong Polytechnic University, Hung Hom, Kowloon, Hong Kong, China, Email: mmsqshi@polyu.edu.hk

L-67: 17:00-17:20 Elastoplastic Singular Stress Field for a Crack Meeting an Interface between Two Linear Hardening Bonded Materials

Yiquan Li1*, Jinquan Xu2, 1School of Mechanical & Electronic Engineering, Changchun University of Science and Technology, Changchun, Jilin 130022, China; 2School of Naval Architecture, Ocean and Civil Engineering, Shanghai Jiao Tong university, Shanghai 200240, China, Email: lyquancn@yahoo.com.cn

L-5: 17:20-17:40 3D Interface Crack in Fully Coupled Electromagnetothermoelastic Multiphase Anisotropic Composites. Part I：Basic Theory and Mathematical Modeling B.J. Zhu1*, T.Y. Qin2, S.H.Yu3, Y.L.Shi1, 1Graduate University of Chinese Academy of Sciences, Beijing,

100049, P. R. China; 2College of Science, China Agricultural University, Beijing, 100083, P.R. China; 3Goodrich Corporation, Charlotte, NC USA, Email: cynosureorion@gucas.ac.cn

17:40-18:00 Discussion e2: How does material damage and failure originate from atomic and microscopic origins and how can multiscale analysis and nano-scale tests assist in modeling?

Session e3: Damage and failure (3) June 5 (Thursday), 8:00-10:00, Room 5

Co-Chairs: Andrew Minor, National Center for Electron Microscopy, USA Jie Li, Tongji University L-57: Invited Talk 8:00-8:25 A micro-mechanical study of dynamic failure in a polycrystalline ceramic

J.F. Molinari1*, R. Kraft2, 1LSMS (Computational Solid Mechanics Laboratory), ENAC, Swiss Institute of Technology Lausanne, CH 1015, Switzerland; 2Mechanical Engineering Dept., The Johns Hopkins University, USA, Email: jean-francois.molionari@epfl.ch.se

L-22: 8:25-8:45 Experimental Investigation of the Fracture Mechanism of Ceramic-Metal Functionally Graded Materials

X. Jin*, W. Xu, L.Z. Wu, Center for Composite Materials and Structures, Harbin Institute of Technology, Harbin, Heilongjiang 150080, China, Email: pzauzn@126.com

L-12: 8:45-9:05 Configurational forces and their application to dynamic fracture in the framework of thermomechanics

Qilin He*, LinZhi Wu, Center for Composite Materials, Harbin Institute of Technology, Yi-Kuang Street, Harbin, 150080,P.R.China; Email: heqilin@yahoo.cn

L-58: 9:05-9:25 Micro-Crack Development in Mortars, Part 2: Modelling of Fracture Process. E. Schlangen*, Delft University of Technology, Faculty of Civil Engineering and Geosciences, Microlab, P.O. Box 5048, 2600 GA, Delft, The Netherlands, Email: h.e.j.g.schlangen@tudelft.nl

Comprehensive presentation LC-3: 9:25-9:31: L-7 Exploration of Jinping High Arch Dam Failure Risk Research Model

Zaitie Chen*, Department of Fundamental Science, Shazhou Institute of Technology, Zhangjiagang, Jiangsu 215600, China, Email: chenzaitie@yahoo.com.cn

LC-4: 9:31-9:37: L-69 Mechanical Performances and Destruction Analysis for Fiber Braided High Pressure Rubber Hoses

J.S. Ren*, J.W. Zhou, Department of Mechanics, Shanghai University, Shanghai, 200444, China, Email: jsren@shu.edu.cn

9:37-10:00 Discussion d3: How does material damage and failure originate from atomic and microscopic origins and how can multiscale analysis and nano-scale tests assist in modeling?

Session e4: Damage and failure (4) June 5 (Thursday), 10:20-12:20, Room 5 Co-Chairs: Y.S. Hong, Institute of Mechanics, Chinese Academy of Science Gerhard Dehm, Austrian Academy of Sciences, Austria

L-56: 10:20-10:40 Theoretical Analysis of Stress Distribution and Failure Mechanism in Asphalt Pavement

Y. Xiao1*, S.P. Wu1, N. Li1, J.F. huang1, 1Key Laboratory of Silicate Materials Science and Engineering of Ministry of Education,Wuhan University of Technology, Wuhan, hubei 430070, China, Email: xiaoyuewhut@hotmail.com

L-6: 10:40-11:00 Investigation of Mechanical Properties of Conductive Asphalt Mixtures Using Indirect Tensile Test

S.P. Wu1, B. Li1*, Q.B. Cheng2, 1Key Laboratory of Silicate Materials Science and Engineering of Ministry of Education, Wuhan University of Technology, Wuhan, Hubei 430070, China; 2Hongshan District Bureau of Urban Administration, Wuhan, Hubei430070, China; Email: lip@whut.edu.cn

L-63: 11:00-11:20 Low Temperature Mechanical Characterization of Polymer Modified Recycled Asphalt Mixture via Indirect Tensile Test

S.P. Wu1*, J. Qiu1,2, N. Li1, Y. Xiao1, 1Key Laboratory of Silicate Materials Science and Engineering of Ministry of Education, Wuhan University of Technology, Wuhan 430070, China; 2Road & Railway Engineering, Civil Engineering & Geosciences, Delft University of Technology, Delft 2600GA, the Netherlands, Email: wusp@whut.edu.cn

L-85: 11:20-11:40 Size Effect of Particles Reinforced Composites Z.Z. Liang1, C.A. Tang1, Y.F. Zhang2, T. Xu1, 1State Key Laboratory of Coastal and Offshore Engineering, Dalian University of Technology, Dalian, People’s Republic of China; 2Civil Engineering Department, Guangzhou University, Guangzhou, People’s Republic of China, Email: Z.Z.Liang@163.com

L-60: 11:40-12:00 Transverse cracking mastercurve of cross-ply laminated composites E. Spārniņš1, 2*, J. Andersons1, R. Joffe2, O. Rubenis1, 1Institute of Polymer Mechanics, University of Latvia, 23 Aizkraukles iela, LV-1006 Riga, Latvia; 2Division of Polymer Engineering, Luleå University of Technology, SE-971 87 Luleå, Sweden, Email: sparns@pmi.lv

L-86: 12:00-12:20 Application of time-stress equivalence to nonlinear creep of physical aging poly (methylmethacrylate) Rongguo Zhao1,2*, Wenbo Luo1,2, Jianghua Tan1, Qifu Li1, Chaozhong Chen1, 1Institute of Fundamental Mechanics and Material Engineering, Xiangtan University, Hunan, Xiangtan 411105, China; 2Key Laboratory of Low Dimensional Materials and Application Technology of Ministry of Education, Xiangtan University, Hunan, Xiangtan 411105, China

Session e5: Damage and failure (5) June 6 (Fri), 8:00-10:00, Room 5 Co-Chairs: Yi-Long Bai, Institute of Mechanics, Chinese Academy of Science

Marc Fivel, CNRS Research Laboratoire, France L-33: 8:00-8:20 Numerical investigation on fatigue crack growth behavior of cracked aluminum panels repaired with piezoelectric patches using MLPG/FEM

Jun Liu1, Bo Yan1*, 1Department of Engineering Mechanics, Chongqing University, Chongqing 400030, China; Email: boyan@cqu.edu.cn

L-19: 8:20-8:40 Numerical Simulation of Interfacial Delamination of PZT Thin Films by Cohesive Zone Models

Yabin Yan, Fulin Shang*, Department of Engineering Mechanics, School of Aerospace, Xi’an Jiaotong University, 28 West Xianning Road, Xi’an 710049, China, Email: shangfl@mail.xjtu.edu.cn

L-37: 8:40-9:00 Micro-numerical simulation of damage-failure process for concrete material Q. Zhang1, X.Z. Xia 2*, Z. Li3, 1Department of Engineering Mechanics, Hohai University, Nanjing, 210098, China; 2Institute of construct, Guangdong University of Technology, Guangzhou, 510006, China &Department of Engineering Mechanics, Hohai University, Nanjing, 210098, China; 3Guangdong Planning & Design Institute for Water Transportation, Guangzhou, 510050, China, Email: xiaxiaozhou@163.com

L-66: 9:00-9:20 A meshless method for stress-wave propagation in anisotropic and cracked media

L.T. Gao1, X.Q. Feng1*, K.X. Liu2, 1Department of Engineering Mechanics, Tsinghua University, Beijing, 100084, China; 2LTCS and Department of Mechanics and Aerospace Engineering, College of Engineering, Peking University, Beijing, 100871, China; Email: fengxq@tsinghua.edu.cn

Discussion (9:20-10:00): How does material damage and failure originate from atomic and microscopic origins and how can multiscale analysis and nano-scale tests assist in modeling? – Context of following posters (4) Poster presentation of Session e L-4: Numerical Simulation of Crack Driving in Heterogeneous Material Components

Zhiming Qu*, chang-long Wang, Li-bo Liu, School of Civil Engineering, Hebei University of Engineering, Handan, Heibei 056038, China; Email: chinaqzm@163.com

L-8: Research on the Influence of Soften-Shape on the Stability of Fault Based on the Cusp Type Catastrophic Theory

Z.C. Ye1*, W. Wang3, Z.T. Chen2, 1College of Civil Engineering, Hohai University, Nanjing, Jiangsu 210098; water affairs bureau, Suqian, 223800, China; 2Shazhou Institute of Technology, Zhangjiagang, Jiangsu 215600, China; 3College of Civil Engineering, Hohai University, Jiangsu 210098, China; E-mail: sqyzc@sina.com

L-11: Transient Thermal/mechanical Coupling Fracture of Functionally Graded Materials-Ten Years Research Activities in China and Australia

B.L. Wang1*, J.C. Han2, 1Department of Mechanical Engineering, The University of Sydney, Sydney, NSW 2006, Australia; 2Center for Composite Materials, Harbin Institute of Technology, Harbin 150001, P.R.China; Email: wangbl@hitsz.edu.cn

L-16: thermal shock characterization of large size ZrB2 ceramic matrix composite material G.Q. Liu*, S.H. Meng, X.H. Xu, X.X. Tian, M. Zhang, Y. Guo, Center for composite materials, Haerbin

Institute of Technology, Haerbin 150080, China; Email: lgq_lxm@yahoo.com.cn L-30: Experimental Studies of Strain and Damage around Notches in C/SiC Composite

Wei Xiong1*, Guiqiong Jiao1, Liu Hong-xia2, 1School of Mechanics, Civil Engineering & Architecture, Northwestern Polytechnical University, Xi’an, Shaanxi,710072, China; 2Department of Building Engineering, Xi’an Technological University, Xi’ An, 710072, China, Email: xiong_wei1980@163.com

L-34: Fatigue Behavior of RC Beams Strengthened with Prestressed Carbon Fiber Laminates J.H. Xie*, P.Y. Huang, Y. Yang, J. Deng, College of Traffic & Communications, South China University of Technology, Guangzhou 510640, China, Email: jhe.xie@mail.scut.edu.cn

L-36: Investigation on Self-organization Characteristc and Critical Behavior during Rock Failure P. Shao 1, 2*, Y.N. He 1, 2, L.J. Han 1，2, D.Q. Wang 1, 2, L.F. Zhou2, F. Huang2, 1State Key Laboratory for Geomechanics and Deep Underground Engineering,Xuzhou, Jiangsu 221008, China; 2School of Architecture and Civil Engineering, China University of Mining and Technology, Xuzhou, Jiangsu 221008, China, Email: spsyc@tom.com

L-38: Tensile and Bending Stress Analysis of Fiber Sheet and Steel Plate-reinforced Concrete Beams with Cracks

Q.D. Zeng*, G.Y. Wang, College of Traffic and Communications, South China University of Technology, Guangzhou 510640, China, Email: emqdzeng@scut.edu.cn

L-39: Tensile Fracture of Hybrid Composite Rebar L.R. Cai*, Q.D. Zeng, College of Traffic and Communications, South China University of Technology, Guangzhou 510640, China, Email: cailurong304@163.com

L-40: Three Phase Mesoscopic Concrete Model Based on Real Inner Structure of Concrete Sample

J. Li1, X. Wu1*, Department of Building Engineering, Tongji University, Shanghai, 200092 China, Email: 0410020023@smail.tongji.edu.cn

L-45: Nonlinear Finite Element Analysis of Concrete Beams Reinforced with FRP bars N. Li*, Y. Luo, College of Traffic and Communications, South China University of Technology, Guangzhou 510640, China, Email: debulo@scut.edu.cn; ssjjsklina@126.com

L-50: The study of Meso Structure and Failure Feature of Liquid rubber concrete basing on the random aggregate model

Zejia Liu1, Liqun Tang1, Chengzao Huang2, Yiping Liu1, Tinghui He1, 1College of Traffic and Communications, South China University of Technology, Guangzhou 510640, China; 2Company Huangpu bridge of Pearl River, Guangzhou, China, Email:lqtang@scut.edu.cn

L-52: Finite element Analyses of cracked piezoelectric strip under tension X.C. Ping1*, H.X. Zheng2, M.C. Chen1, J.L. Xie3, 1School of Mechanical and Electronical Engineering, East China Jiaotong University, Nangchang, Jiangxi 330013, China; 2School of Communication, Lu Dong University, Yantai, Shandong 264025, China; 3School of Mechanical and Electric Control Engineering, Beijing Jiaotong University, Beijing 100044, China, Email: xcping@ecjtu.jx.cn

L-61: Effect of Cracks on Interfacial Stresses in RC beams Strengthened with Pre-stressed Hybrid Fibre Sheets

Y.C. Guo1, 2*, P.C. Huang1, L.J. Li2, F. Liu2, 1College of Traffic and Communications, South China University of Technology, Guangzhou, Guangdong, 510040, P. R. China, Email: gycgdut@163.com

L-68: Experimental Study on Impact Damage of PBX Explosive and its Mock Material X.L. Wu*, A.L. Wang, College of Mechanical Engineering & Automatization, North University of China, Taiyuan, Shanxi, 030051 China; Email: wuxl@nuc.edu.cn

L-78: The calculation of dynamic stress intensity factor of interface crack subjected to gradient circling expanding antiplane shear loadings

B.K. Guo1*, L. Zhang1, J. Cheng1, 1Department of Astronautic Science and Mechanics, Harbin Institute of Technology, Harbin 150001, China, Email: guobaoke@126.com

Session f1: Process-microstructure relations (1) June 5 (Th), 8:00-10:00, Room 3 Co-Chairs: Mojtaba Kahrizi, Concordia University, Canada L. Pang, Wuhan University of Technology D-15: keynote talk 8:00-8:30 Development of Microstructure- and Mechanism-Based Modeling Tools for Plastic Deformation in Multiphase Alloys

N. Zhou1, C. Shen2, J. Li3, M.J. Mills1 and Y. Wang1*, 1Department of Materials Science and Engineering, The Ohio State University, 2041 College Road, Columbus, Ohio 43210, USA; 2GE Global Research, 1 Research Circle, Niskayuna, New York 12309, USA; 3Department of Materials Science and Engineering, University of Pennsylvania, 3231 Walnut Street, Philadelphia, PA 19104, USA, Email: wang.363@osu.edu

D-2: 8:30-8:50 Structural and Morphological Evolutions of Pure and its SBS-modified Asphalt Binders in the Process of Aging

L. Pang1*, S.P. Wu1, Y.C. Chen1 , L.X. Ma1, G.J. Zhu1, Key Laboratory of Silicate Materials Science and Engineering of Ministry of Education, Wuhan University of Technology, Wuhan, Email: lingpang@whut.edu.cn

D-16: 8:50-9:10 Microstructure and Mechanical Properties of Copper subjected to High Pressure Torsion

Z.L. Xie, Y.S. Hong*, State Key Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, China, Email: hongys@imech.ac.cn

D-4: 9:10-9:30 Resistance of Grain Boundaries to Fatigue Crack Growth in High Strength Al Alloys T. Zhai*, X.P. Jiang, J.C. Li, G.H. Bray, Department of Chemical and Materials Engineering, University of Kentucky, KY 40506, USA, Email: tzhai@engr.uky.edu

9:30-10:00 Discussion f1: How can microstructure- and mechanism-based multiscale simulation tools assist in modeling process-structure relations? Missing links?

Session f2: Process-microstructure relations (2) June 5 (Th), 10:20-12:20, Room 3 Co-Chairs: Zhirui Wang, University of Toronto, Canada Z. Zhuang, Tsinghua University 10:20-10:40 Discussion f Cross Sectional TEM Observation and Nanoindentation Study of Multilayered Nanocomposite Coatings

Y.T. Pei*, C.Q. Chen, K.P. Shaha, J. TH. M. De. Hosson, Department of Applied Physics, The Netherlands Institute for Metals Research, University of Groningen, Nijenborgh 4,9747 AG Groningen, the Netherlands, Email: y.pei@rug.nl

D-21: 10:40-11:00 Effect of UV Ageing on Components, Structure and Properties of Asphalt Li.Xing. Ma1*, Shao.Peng.Wu1, J.F. Huang, Y. Xiao, 1Key Laboratory of Silicate Materials Science and Engineering of Ministry of Education, Wuhan University of Technology, Wuhan 430070, China, Email: mlx@whut.edu.cn

D-5: 11:00-11:20 Experimental Study on Strain Rate Sensitivity of Aligned Carbon Nanofiber Reinforced Polypropylene

Yuanxin Zhou1*, M.S. Shaik1, Thomas Lacy2, M.F. Horstemeyer2, 1Center for Advanced Material (T-CAM), Tuskegee, AL 36088 Thomas Lacy; 2Department of Aerospace Engineering, Mississippi State University, Email: yzhou@tuskegee.edu

D-30: 11:20-11:40 Analysis of Forming Limit Diagram for Aluminum Bilayers P.D. Wu1*, J.D. Embury2, D.J. Lloyd3, 1Department of Mechanical Engineering, McMaster University

Hamilton, Ontario L8S 4L7, Canada; 2Department of Materials Science and Engineering, McMaster University Hamilton, Ontario L8S 4L7, Canada; 3Novelis Global Technology Centre, Kingston, Ontario K7L 5L9, Canada, Email:peidong@mcmaster.ca

11:48-12:20 Discussion f2: How can microstructure- and mechanism-based multiscale siulation tools assist in modeling process-structure relations? Missing links?

Session f3: Process-microstructure relations (3) June 6 (Fri), 8:00-10:00, Room 3 Co-Chairs: Z. P. Huang, Peking University Alan Cocks, Oxford University, UK

A-52: Keynote Talk 8:00-8:30 Mechanics in Nanopiezotronics

Zhong Lin (ZL) Wang, School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta USA, Email:zhong.wang@mse.gatech.edu

D-20: Invited talk 8:30-8:55 Relationship between the initial grain boundary energy of a material and its work hardening responses

Zhirui Wang, Department of Materials Science and Engineering, University of Toronto 184 College Street, Toronto, Ontario, Canada, M5S 3E4, Email: zhirui.wang@utoronto.ca

C-14: 9:15-9:35 Chemically driven inelastic strain in multi-component systems J. Svoboda1*, F. D. Fischer2,3, 1Institute of Physics of Materials, Academy of Sciences of the Czech Republic, Žižkova 22, CZ-616 62, Brno, Czech Republic; 2Institute of Mechanics, Montanuniversität Leoben, Franz-Josef-Straße 18, A-8700 Leoben, Austria; 3Materials Center Leoben Forschung GmbH, Roseggerstraße 12, A-8700 Leoben, Austria, Email: svobj@ipm.cz

AC-6: 9:35-9:55: A-22 The study of electromechanical coupling effects on the dynamic behavior of nanostructures

Li Qiao and Xiaojing Zheng**, Department of Mechanics and Engineering Science, Lanzhou University, Lanzhou, Gansu , 730000, P. R. China, Email: xjzheng@lzu.edu.cn

9:55-10:00 Discussion f3: How can microstructure- and mechanism-based multiscale simulation tools assist in modeling process-structure relations? Missing links? – Context of the following posters Poster presentation of Session f D-12: Microstructure and high temperature mechanical properties of hot-pressed ZrB2-based composites

Yu Wang*, Jun Liang, Feiyu Yang, Xinghong Zhang, Center for Composite Materials, Harbin Institute of Technology, Harbin 150001, PR China, Email: wangyu4451@126.com

D-23: Two dimension numerical simulation on shock initiation and detonation behavior of impact Damaged PBX material

Z.Y.Liang1*, F.L.Huang2, Z.Y. Zhang2, 1School of mechatronice engineering, North University of China, Taiyuan, 030051, China; 2State Key Laboratory of Explosion Science And Technology, Beijing Institute of Technology, Beijing 10081,China, Email: zengyou_liang@sina.com.cn

D-31: A study of inhomogeneous plastic deformation and microstructural evolution of Fe-Cr-based low alloy steel

Y.C. Lin*, School of Mechanical and Electrical Engineering, Central South University, Changsha 410083, China, Email: yclin@mail.csu.edu.cn

Session g1: Geological and infrastructure materials (1) June 5 (Th), 13:30-15:30, Room 4 Co-Chairs: Jiangu Qian, Tongji University B. Panicaud, Universite de Technologie de Troyes, France I-3: 13:30-13:50 Study on Crack Resistance of Steel Fiber Reinforced Concrete

Qingwen Ren *, Yong Yang, Mingrong Mei, Shanshan Wang, Civil Engineering College of Hohai University ,Nanjing, Jiangsu, 210098, China, Email: renqw@hhu.edu.cn

I-22: 13:50-14:10 A new Method for Estimation and Forecasting of the Degree of Stability State of Rock massif

O.A. Hachay, Institute of Geophysics UD RAS. Russian Federation, Email: olga.hachay@r66.ru J-7: 14:10-14:30 Effects of Hydrated Lime on the Dynamic Properties of Gneiss Asphalt Mixtures

Jun-Feng Huang1*, Shao-Peng Wu1, L. Pan2, Y. Xiao1, 1Key Laboratory of Silicate Materials Science and Engineering of Ministry of Education, Wuhan University of Technology, Wuhan 430070, China; 2Wuhan Jingcheng Engineering Construction Supervision Co., Ltd, Wuhan, Hubei 430070, China; Email: hjf0808@163.com

J-8: 14:30-14:50 Investigation of Viscoelastic and fatigue properties of Hybrid Fiber Reinforced Sand Asphalt Mixture

H.B. Yue*, S.P. Wu, Key Laboratory of Silicate Materials Science and Engineering of Ministry of Education, Wuhan University of Technology, Wuhan 430070, China, Email: yuehb@whut.edu.cn

14:50-15:30 Discussion g1: What opportunities and challenges exist for further improving constitutive laws for these materials? Including context of following posters I-19: A New Prediction Method of Deformation Interval of Surrounding Rockmass in Underground Engineerings

C. Q. Zhang1*, X. T. Feng1, H. Zhou1 , 1State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, CAS, Wuhan, Hubei 430071, China, Email: cqzhang@whrsm.ac.cn

I-24: Analyses of Strain Localization and Mechanical Behavior of Multilinear Strain-Softening Materials in Uniaxial Tension

X.B. Wang*, Department of Mechanics and Engineering Sciences, Liaoning Technical University, Fuxin 123000, China, Email: wxbbb@263.net

I-25: Dynamic friction of rock-on-rock sliding Songlin Xu *, Kan Zhang, Yonggui Liu, Hang Zheng, CAS Key Laboratory for Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei 230027, China, Email: slxu99@ustc.edu.cn

Session g2: Geological and infrastructure materials (2) June 5 (Th), 15:50-18:00, Room 4 Co-Chairs: E. Schlangen, Delft University of Technology, Netherlands Z. P. Tang, Univ. of Science and Technology of China I-12: 15:50-16:10 A Practical Elastic-Brittle-Plastic Model Based on H-B Criterion and Its Application to a Coupling Analysis

Z.Q. Liu1*, Q. Zhang1, W.L.Chen, 1Department of Engineering Mechanics, HoHai University, Nanjing, Jiangsu 210098, China, Email: lzq6666oopp@hhu.edu.cn

I-15: 16:10-16:30 The Research of a Concrete Constitutive Model at High Temperature Jun-lin Tao *, Li-bo Qing, Bing Jia, Dpartment of Civil Engneering and Architecture, Southwest University of science and Technology, Mianyang, Sichuan 621010, China, Email: junlintao@126.com

I-16: 16:30-16:50 Study on the Dynamic Fracture Process and Fracture Law of Cracks Rock under the Coupled Mechanical-Hydraulic-Chemical Environment

Wuxiu Ding 1,2*, Xiating Feng 1,3, 1School of Resources and Civil Engineering,Northeastern University, Shenyang, liaoning 110004, China; 2Department of Civil Engineering,Luoyang Institute of Science and Technology, Luoyang, henan 471023, China, Email: wuxiu-ding@163.com

I-21: 16:50-17:10 FEM-based Secondary Development of Geo-material Constitutive and Its applications X. Zhang*, S.C. Li, Research Center of Geotechnical and Structural Engineering, Shandong University,

Jinan, Shandong 250061, China, Email: xxz_79329@163.com Comprehensive presentation IC-1: 17:10-17:14: I-23 Study on Deterioration Model for Hard Rockmass under High Geo-stress

Quan Jiang*, Xia-Ting Feng, Guo-Qing Chen, State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, hubei 430071,China; Email: qjiang@whrsm.ac.cn

IC-2: 17: 14-17:18: I-2 Influence of Non-coaxial Plasticity on Localized Failure in Geomaterials J.G. Qian*, M.S. Huang, Department of Geotechnical Engineering, Tongji University, Shanghai, 200092, China; Email: qianjiangu@mail.tongji.edu.cn

IC-3: 17:18-17:22: I-8 Three Effective Stress Theorems for the Volumetric Response of the Saturated Poroelastic Media with Double Porosities

Y.S. Li, F.P. Zhang, Z.H. Xu*, Institute of Engineering Mechanics, Northeastern University, Shenyang Liaoning, China; Email: xuzenghe@yahoo.com.cn

IC-4: 17:22-17:26: I-27 Sensitivity Study on the Effect of the Seepage of Underground Hydraulic Tunnel

X.K. Du1*, Q.W. Ren2, 1College of Water Conservancy and Hydropower Engineering , the University of Hohai, Nanjing, Jiangsu 210098, China; 2College of Civil Engineering, Hohai University, Nanjing, Jiangsu 210098, China; Email: duxiaokai2005@hhu.edu.cn

IC-5: 17:26-17:30 I-17 Parameters Identification of Constitutive Model for Heterogeneous Brittle Rock Using PSO-FLAC3D Method

Guoshao Su1, 2*, Jingtao Chen3, Xiaofei Zhang1, 1Key Laboratory of Rock and Soil Mechanics, Chinese Academy of Sciences, Wuhan, 430071, China; 2Civil and Architecture Engineering College, Guangxi University, Nanning 530004, China; 3School of Nature Sciences, Wuhan University of Technology University, China, Email: suguoshao@163.com

17:30-18:00 Discussions g2: What opportunities and challenges exist for further improving constitutive laws for these materials?

Session g3: Geological and infrastructure materials (3) June 6 (Fri), 8:00-10:00, Room 4 Co-Chairs: E. P. Chen, Sandia National Laboratories Livermore, USA Li Hao, Beijing University of Civil Engineering and Architecture L-82: 8:00-8:20 Estimate of Stability against Deeper and Shallow Layer Sliding of Gravity Dam

Zhao Yin1*, Ren Qingwen2, Lu Xiaomin3, 1,2,3College of Civil Engineering, Hohai University, Nanjing 210098, China, Email: zhaoyin01@hhu.edu.cn

N-15: 8:20-8:40 Theoretical Model and Numerical Analysis on Unsaturated Expansive Soil Slope during Digging and Climate Change Courses (II)－Numerical Analysis Z.H. Chen1*, Z.H. Lu2, J.F. Guo1, X.W. Fang1, B. Qin1, 1Logistic Engineering University, Chongqing

400041, P R China; 2Navy University of Engineering, Wuhan 430033, P R China; Email: chenzhenghan47@163.com

N-14: 8:40-9:20 An Elasto-plasticity-damage Constitutive Relationship of Unsaturated Expansive Soil Z.H.Chen1*, Z.H. Lu2, J.F.Guo1, X.W.Fang1, B. Qin1, 1Logistic Engineering University, Chongqing

400041, P R China; 2Navy University of Engineering, Wuhan 430033, P R China; Email: chenzhenghan47@163.com

J-9: 9:20-9:40 Performance evaluation of graphite and carbon fiber modified conductive asphalt concrete

N. Li1*, S.P. Wu1, L.X.Ma1, J.F. Huang, Key Laboratory of Silicate Materials Science and Engineering of Ministry of Education, Wuhan University of Technology, Wuhan 430070, China, Email: Lin@whut.edu.cnn

9:40- 10:00: Discussion g3: What opportunities and challenges exist for further improving constitutive laws for these materials? Including context of following posters Poster presentation of Session g3 I-5: Study on dynamic elastic modulus of Sandy Pebble Soil Subjected to Dynamic Loading

Ru-heng Wang 1*, Xun-zhong Zhang 1, Bin Jia 1, Wen Guo 1, Scholl of Civil Engineering & Architecture, Southwest University of Science and Technology, Mian Yang 621010, China; Email: zxzcmj@126.com

I-6: The Dynamic Characteristics of Sandy Pebble Soil B. Jia1, 2*, Y. Zhang1, R.H. Wang1, 2, 1Scholl of Civil Engineering & Architecture,SouthWest University of Science and Technology, SiChuan, Mian Yang 621010, China; 2School of Civil Engineering, ChongQing University, Chong Qing, 400030,China, Email: jiabin216@126.com

I-11: Study on Liquefaction Property of Sand Pebble Soil in Sichuan Region Wen Guo1*, Ru-heng Wang1, 1Civil and Architecture College, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China, Email: wenpeng123@21cn.com

Session h: Mechanics of stochastic materials June 5 (Th), 13:30-15:30, Room 3 Co-Chairs: Williams Curtin, Brown University Yuan Lin, Harbin Institute of Technology J-2: 13:30-13:50 Hysteresis Model for Stochastic Material under Cyclic Loading

Jie Li, Xiaodan Ren*, School of Civil Engineering, Tongji University, 1239 Siping Road, Shanghai 200092, China; Email: lijie@mail.tongji.edu.cn

J-3: 13:50-14:10 Stochastic Fluctuation Analysis for Heterogeneous Material during Entire Loading Process

Jie Li* , Xiaodan Ren, Shajie Zeng, School of Civil Engineering, Tongji University, 1239 Siping Road, Shanghai 200092, China; Email: lijie@mail.tongji.edu.cn

J-10: 14:10-14:30 The Model of Random Medium and Wave Field Analasis in 2-D Space

Kaifeng. Han*, Xinwu Zeng, Institute of Optical-electronic Science and Engineering, National University of defense Technology, Changsha, Hunan, 410073, China, Email: shunzhihan@sohu.com

LC-2: 14:30-14:50 Micro-Crack Development in Mortars, Part 1: Fracture Experiments and CT-scan Observations

E. Schlangen*, G. Timmers, A. Thijssen, Delft University of Technology, Faculty of Civil Engineering and Geosciences, Microlab, P.O. Box 5048, 2600 GA, Delft, The Netherlands, Email: h.e.j.g.schlangen@tudelft.nl

JC-1: 14:50-15:30 Discussion: What is the acceptable size of RVE for various random material microstructures and how do we proceed when a RVE cannot be set up for cases in which either averages or fluctuations or both of random variables are needed? Poster presentation of Session h J-1: Study on the complexity of RCC autogenous volume deformation based on the symbolic dynamics

Jun-wei Song*, Kun-he Fang, State Key Laboratory of Water Resource and Hydropower Engineering Science, Wuhan University, Wuhan, HuBei 430072, China; Email: sjw77@tom.com

J-11: Mechanical behavior Analysis on Steel Plate Joint of Concrete-filled Square Steel Tubular Column with SRC Beam

Jinsong Lei1, Y. Yao2, Yinsheng Zou1, R.H. Wang2, 1College of Civil Engineering, Hunan University, Changsha, Hunan 410082, China; 2School of Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China, Email: leijinsong@swust.edu.cn

Session i1: Physical foundations of inelasticity (1) June 5 (Th), 13:30-15:30, Room 5 Co-Chairs: Xingyuan (Scott) Mao, University of Pittsburgh, USA Q. P. Sun, Hong Kong University of Science and Technology M-5: Invited Talk 13:30-13:55 A Coupled Dislocation-Hydrogen Based Model of Inelastic Deformation of Metals and Alloys

D. Bammann1*, P. Novak2, P. Sofronis3*, B. Somerday3, 1Mississippi State University, Starkville, MS39759, USA; 2University of Illinois at Urbana-Champaign, Urbana, IL 61801, USA; 3Sandia National Laboratories, Livermore, CA 94550, USA, Email: bammann@me.msstate.edu

A-4: Invited Talk 13:55-14:20 Atomistic simulations of grain boundary dislocation nucleation M.A. Tschopp, D.L. McDowell, Air Force Research Laboratory, WPAFB, Dayton, OH USA, School of Materials Science & Engineering, Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA USA; Email: david.mcdowell@me.gatech.edu

K-11: 14:20-14:40 Multiscale simulation of twin grain boundary effects on nanoindentation Lin Yuan*, Zhenhai Xu, Debin Shan, Bin Guo, Y.C. Liang, School of Materials Science and Engineering, Harbin Institute of Technology, Harbin, Heilongjiang Province 150001, P. R. China, Email: yuanlin@hit.edu.cn

K-2: 14:40-15:00 Experimental and numerical study on the micro-forming of copper multi-crystal

XiaoLiang Geng*1, KeShi Zhang1,2, YunQiang Guo1, Liang Qin1, 1Northwestern Polytechnical Universtiy, Xi’an Shaanxi, 710072, China; 2Guangxi University, Nan’ning, Guangxi, 530004, China; Email: gengxiaoliang@nwpu.edu.cn

K-14: 15:00-15:20 FEM Simulation of Inelastic Contact of Rough Bodies Alexander A. Olshevsky*, Alexey A. Olshevsky, K.V. Shevchenko, Bryansk State Technical University, Bryansk, Russia, Email: dsmsoft@rambler.ru

K-19: 15:20-15:40 Strain Growth in Spherical Explosion Containment Vessels Caused by Non-linear Modal Coupling

Q. Dong1*, Q.M. Li1, J.Y. Zheng2, 1School of Mechanical, Aerospace and Civil Engineering, Pariser

Building F Floor, The University of Manchester, PO Box 88, Manchester M60 1QD, UK; 2Institute of

Chemical Machinery and process equipment, Zhejiang University, Hangzhou 310027, P.R. China, Email:

Qi.Dong@postgrad.manchester.ac.uk

15:40- 16:00: Discussion i1: How far along is discrete dislocation theory and modeling in terms of

developing a physics-based inelasticity theory at the mesoscale?

Session i2: Physical foundations of inelasticity (2) June 5 (Th), 15:50-18:00, Room 5 Co-Chairs: Keh-Chih Hwang, Tsinghua University Alexander A. Olshevsky, Bryansk State Technical University, Russia K-9: 15:50-16:10 Investigation of the Residual Stress-Dependent Hardness of Amorphous Alloys

S. Qu1*, Q. Ge 1, L. Chen2, J. Jiang2, 1Department of Engineering Mechanics, Zhejiang University, Hangzhou, Zhejiang, 310027 China; 2Department of Materials Science and Engineering, Zhejiang University, Hangzhou, Zhejiang, 310027 China, Email: squ@zju.edu.cn

Q-19: 16:30-16:50 A Hybrid Hyperelastic Constitutive Model of Rubber Materials Wenbo Luo 1,2,*, Jianghua Tan 1,1 College of Civil Engineering and Mechanics, Xiangtan University, Xiangtan 411105, China；2 Key Laboratory of Low Dimensional Materials and Application Technology (Xiangtan University), Ministry of Education, China, Email: luowenbo@xtu.edu.cn

K-10: 16:50-17:10 A Numerical Implementation of Grain Boundary Effects for Directionally Solidified Nickel-based Alloy J.F. Nie1, X.C. You1, Z. Zhuang1*, X.D. Li2, 1Dept. of Eng. Mechanics, School of Aerospace, Tsinghua

University, Beijing, 100084, China; 2State Key Laboratory of Advanced Non-Ferrous Materials, Gansu University of Technology, Lanzhou, Gansu 730050, China; Email:zhuangz@tsinghua.edu.cn

Comprehensive presentation KC-1: 17:10-17:14: K-4 Computational Methods on Explosion and Impact Problem

Hao Li1*, Ning Jian-guo2，Ma Tian-bao2, liu yan1, 1Foundational Courses Department, Beijing University of Civil Engineering and Architecture, Beijing 100044, P.R.China; 2State Key Lab for the Prevention and Control of Explosion Disaster, Beijing Institute of Technology, Beijing 100081, P. R. China, Email: haoli@bucea.edu.cn

KC-2: 17:14-17:18 K-8 Modeling Creep Behavior of Soft Rock Using an Evolutionary Neural Computing Method

C.X. Yang 1*, X.T. Feng1, B.R. Chen 2, Institute of Rock and Soil Mechanics, The Chinese Academy of Sciences, Wuhan, Hubei 430071, China, Email: irm@mail.neu.edu.cn

KC-3: 17:18-17:22: K-15 Transitions of force and relaxation in a high-temperature superconductor levitation system

Jun Zhou*, Xingyi Zhang, Youhe Zhou, Xiaojing Zheng, Key Laboratory of Mechanics on Western Disaster and Environment, and Department of Mechanics and Engineering Science, College of Civil Engineering and Mechanics, Lanzhou University, Lanzhou, Gansu 730000, China, Email: zhoujun04@lzu.cn

KC-4 17:22-18:00 Discussion i2: How far along is discrete dislocation theory and modeling in terms

of developing a physics-based inelasticity theory at the mesoscale?

Poster presentation of Session i K-1: Research on the Influence of Slip Rate and System Stiffness on Fault Slip Stable

W. Wang1*, Q.W. Ren1, Z.T. Chen2, 1College of Civil Engineering, Hohai University, Nanjing, Jiangsu 210098, China; 2Shazhou Institute of Technology, Zhangjiagang, Jiangsu 215600, China; Email: wwiem@163.com

K-13: The impact tensile properties of a Ti alloy at different strain rates Weifang Xu *, Gang Chen, Xicheng Huang, Wei Niu, Institute of Structural Mechanics, CAEP, P. O. BOX 919-40, Mianyang, 621900, Sichuan, PRC, Email: weifangxu@126.com

K-18: Phase transformation internal friction peak in Ni71Al15Cr10W4 alloy Zheng-Cun Zhou*, Suzhou Vocational University, Suzhou, Jiangsu 215104, China; Email:zhouzhengcun@126.com

Session j1: Nano-submicron scale testing using TEM and SEM June 4 (Wed), 8:00-10:00, Room 4 Co-Chairs: Andrew Minor, National Center for Electron Microscopy, USA Tong-Yi Zhang, Hong Kong University of Science and Technology A-44: Keynote Talk 8:00-8:30 Nanomechanics on grain boundary mediated plasticity in nanocrystalline material

Xingyuan (Scott) Mao*, Department of Mechanical Engineering and Materials Science, University of Pittsburgh, Pittsburgh, PA 15261, USA, Email: smao@engr.pitt.edu

A-31: invited talk 8:30-8:55 Plasticity Live: Direct Observation Nanomechanical Testing in the TEM Zhiwei Shan1,2, Andrew M. Minor2, S.A. Syed Asif1 and Oden L. Warren1, 1Hysitron Incorporated, 10025 Valley View Road, Minneapolis, Minnesota 55344, USA; 2National Center for Electron Microscopy, Lawrence Berkeley National Laboratory, Berkeley, California 94720, USA, Email: zshan@hysitron.com

A-32: 8:55-9:15 Nanoscale compression testing inside a TEM J. Ye1, R.K. Mishra2, Z.W. Shan3, S.A. Syed Asif3, O. L. Warren3, and A. M. Minor1*, 1National Center for Electron Microscopy, Lawrence Berkeley National Laboratory, Berkeley, California 94720, USA; 2General Motors Research and Development Center, Warren, MI 4809; 3Hysitron Incorporated, 10025 Valley View Road, Minneapolis, Minnesota 55344, USA, Email: aminor@lbl.gov

N-6: 9:15-9:35 Experimental Study on Strength and Deformation Characteristics of Single Cracked Marble Sample

B.H. Guo*, C.D. Su, School of Energy Science and Engineering, Henan Polytechnic University, Jiaozuo, Henan 454010, China, Email: guobhguobh@126.com

9:35-10:00 Discussion j1: What is the potential interplay between atomistic modeling and in-situ experiments?

Session j2: Experimental methods in relation to modeling (1) June 4 (Wed), 10:20-12:20, Room 4 Co-Chairs: Xiaoping Wu, University of Science and Technology of China X. (Scott) Mao, University of Pittsburgh, USA Q-13: Keynote Lecture 10:20-10:50 In situ micro-scale experiments for measuring the interfacial toughness of yttria stabilized zirconia thermal barrier coatings

Chris Eberla,*, Daniel S. Gianolaa,*, Ming Heb, Anthony G. Evansb and Kevin J. Hemkera, aDepartments of Mechanical Engineering and Materials Science and Engineering, Johns Hopkins University, Baltimore, MD, USA 21218; aDepartments of Mechanical Engineering and Materials Science and Engineering, University of California Santa Barbara, Santa Barbara, CA, USA; *currently at: Forschungszentrum Karlsruhe, Institute for Materials Research II, Karlsruhe, Germany, Email: hemker@jhu.edu

N-12: 10:50-11:10 Measurement of dynamic properties of viscoelastic materials V.M. Kulik1*, A.V. Boiko2, B.Seoudi3, H.H.Chun3 and I. Lee3, 1Institute of Thermophysics, Russian Academy of Sciences, Novosibirsk, 630090, Russia; 2Institute of Theoretical and Applied Mechanics, Russian Academy of Sciences, Novosibirsk, Russia; 3ASERC, Pusan National University, Busan 609-735, Korea, Email: kulik@itp.nsc.ru

N-18: 11:10-11:30 Experimental Research On Destroyed Process Of Laminates Subjected Under Pure Bending

Guo-biao Yang1,2*, Ding Yi1, ZHANG Zhang1, Dongfang Wang1, School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China; Email: yanggby@mail.tongji.edu.cn

N-16: 11:30-11:50 Experiment Study for Mechanical Properties of directional Plexiglas X.H. Ji1*, S. Wei2, Dept. of Mechanics, School of mechanical Engineering, Tianjin University,Tianjin

300072, P. R.China; Email: xhji@tju.edu.cn Comprehensive presentation NC-1:11:50-11:54: N-2 Experimental Research on Transport of Coalbed Methane by NMRI Technique

J.P. Tang 1,2*, Y.S. Pan2, X.Y. Chuan1 ,C.Q. Li 2, 1School of Earth and Space Science, Peiking University, Beijing 100871, China; 2School of Mechanics and Engineering, Liaoning Technical University, Fuxin, Liaoning 123000, P. R. China, Email: jupengt@pku.edu.cn or jupengt@126.com

NC-2:11:54-11:58: N-3 Experimental Study on Tension and Compression Mechanical Property of 3D fine woven punctured C/C composites

B.L. Wang1*, J. Liang1, Y. Liu1, F.C. Wen2, 1Center for Composite Materials and Structure, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China; 2No. 703 Research Institute of China Shipbuilding Industry Corporation, Harbin, Heilongjiang 150036, China, E-mail:wangbaolai1979@sina.com

11:54-12:20 Discussion j2: What is the potential interplay between atomistic modeling and in-situ experiments?

Session j3: Experimental methods in relation to modeling (2) June 4 (Wed), 13:30-15:30, Room 4 Co-Chairs: Kevin J. Hemker, Johns Hopkins University, USA W. Q. Chen, Zhejiang University N-22: Keynote Lecture 13:30-14:00 Study on 3-D Microstructure Evolution of Material by Synchrotron Radiation Computed Tomography X.P. Wu, CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science

and Technology of China, Hefei, 230027, China, Email: xpwu@ustc.edu.cn L-15: 14:00-14:20 Investigating creep behaviour in austenitic stainless steels through synchrotron x-ray tomography

Ke-Shen Cheong*, Kevin J. Stevens*, Yoshio Suzuki** and Akihisa Takeuchi**, *Quest Reliability Ltd., Structural Integrity Group, 69 Gracefield Road, Lower Hutt PO Box 38-096, New Zealand 5010; **Japan Synchrotron Radiation Research Institute, 1-1-1, Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198, Japan, Email: k.cheong@questreliability.com, *k.stevens@questreliability.com, **yoshio@spring8.or.jp, **take@spring8.or.jp

P-24: 14:20-14:40 Propagation characteristics of Portevin-Le Chatelier bands H.B. Chen, Q.C. Zhang, X.P. Wu, CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, Anhui 230026, China, Email: zhangqc@ustc.edu.cn

Comprehensive presentation NC-3: 14:40-14:44: N-5 Effect of Intermediate Principal Stress on Mechanics Characteristic of Brittle Rock Material under True Triaxial Unloading Testing

B.R. Chen*, X.T. Feng, T.B. Xiang, H. Zhou, State Key Laboratory of Geomechanics and Geotechnical Engineering, Institute of Rock and Soil Mechanics, the Chinese Academy of Sciences, Wuhan, Hubei 430071, China, Email: brchen@whrsm.ac.cn

NC-4: 14:44-14:48: N-20 1-D Stress and 1-D Strain Basic Experiments and Relationship between EOS and Constitutive Equations X.C. Huang1*, Y.Z. Chen1, J.S. Zhu2, 1Institute of Structural Mechanics, China Academy of Engineering

Physics, Mianyang, 621900, P. R. China; 2Institute of Applied Physics and Computational Mathematics, Beijing, Email: huangxc@caep.ac.cn

NC-5: 14:48-14:52: N-17 Experiment Study on Subgrade Settlement Shengji Jin1,2, Xinpu Shen2, Tianqing Yu1, Jianmin Xiong1, 1College of Resources and Civil engineering, Northeast university Shenyang, 110004, China; 2College of Architectural Engineering, Shenyang University of Technology, Shenyang, 110023, China, Email: shengjijin@sina.com

14:52-15:30 Discussion j3: What is the potential interplay between atomistic modeling and in-situ experiments? - Context of posters Poster presentation of Session j N-1: Study on Mechanical Properties and Permeability of Gas-rich Coal Rocks

T.J. Zhang1*, S.G. Li, Z.Q. Chen, T.C. Zhang, 1Xi’an University of Science and Technology, Xi'an, Shaaxi 710054, China, Email: tianjun_zhang@126.com

N-4: 8:45-9:05 Analysis on Effect Factors of Shearing Strength of Sandy Pebble Soil in Northwest of Sichuan

Yaoyong1,2*, Zhanglingling1, Liuying1, Xiaojun1, 1School of Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang 621010, China; 2School of Civil Engineering, Southwest Jiao Tong University, Chengdu, 610031, China, Email: yy001221@163.com

N-7: Study Morphology Evolution in self-assembled Block Copolymer Thin Films in virtue of Carbon Nanotube

Y.Z. Cao 1,2*, Q.X. Meng1, S. Dong2, T. Sun2, Y. D. Yan 2, Y. C. Liang2, 1College of Mechanical Electrical Engineering, Harbin Engineering University, Harbin, Heilongjiang 150001, China; 2Precision Engineering Research Institute, Harbin Institute of Technology, Harbin, Heilongjiang 150001, China, Email: caoyongzhi1@yahoo.com.cn

N-8: Dynamic test of Asphalt concrete and analysis of dynamic responses on 3D layered system using test results

C.Y. Wu1*, 1Highway Research Department, Jiangsu Transportation Institute, Nanjing, China, Email: wu_chunying@hotmail.com

N-10: Determining the Change of the HAZ Mechanical Properties of TA15 Titanium Alloy by Electron Beam Welding with Ultrasonic Method

G.R. Song*, C.F. He, X.Y. Li, B. Wu, Z.H. Liu, Modern Measurement and Control Technique Laboratory, College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing, 100022, China; Email: grsong@bjut.edu.cn

N-11: Evolutionary Identification of Rheological Behavior of Claystone C.X. Yang1*, Y.F. Zhu2, X.T. Feng1, B.R .Chen2, 1School of Resources & Civil Engineering, Northeastern University, Shenyang 110004, Liaoning, China; 2Institute of Rock and Soil Mechanics, The Chinese Academy of Sciences, Wuhan, Hubei 430071, China; Email: irm@mail.neu.edu.cn

N-13: Measurement of dynamic Poisson’s ratio and the form factor for a cylindrical sample A.V. Boiko1, V.M. Kulik2*, B.Seoudi3, H.H.Chun3 and I. Lee3, 1Institute of Thermophysics, Russian Academy of Sciences, Novosibirsk, 630090, Russia; 2Institute of Theoretical and Applied Mechanics, Russian Academy of Sciences, Novosibirsk, Russia; 3ASERC, Pusan National University, Busan 609-735, Korea, Email: kulik@itp.nsc.ru

N-19: The Effect of Temperature on the Serrated Flow in AA5456 Alloys Pengtao Cao, Qingchuan Zhang*, Shihua Fu, Haowen Liu, CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, 230027, China, Email: zhangqc@ustc.edu.cn

Session j4: Nondestructive testing June 6 (Fri), 10:20-12:20, Room 5 Co-Chairs: Jianmin Qu, Georgia Institute of Technology, USA Yiquan Li, Chungchun University of Science & Technology O-6: 10:20-10:40 Thermal Behavior of Microwave-Radiated Hydrogen Loaded Fiber Bragg Grating

Mojtaba Kahrizi*, Bowei Zhang, Electrical & Computer Engineering, Concordia University, 1455 de maisonneuve Blvd. West, Montreal, Quebec, Canada, H3g 1M8, Email: mojtaba@ece.concordia.ca

O-2: 10:40-11:00 Research on Piezoelectric Phased Array for Structural Health Monitoring Yi Sun1*, Xingang Li1, Zhanwen Huang1, Xiaodong Wang2, Shaorui Yang1, 1Department of Astronautics and Mechanics, Harbin Institute of Technology, Harbin, 150001, China; 2Department of Mechanical

Engineering, University of Alberta, Edmonton, Canada T6G 2G8, Email: sunyi@hit.edu.cn O-3: 11:00-11:20 Propagation of Longitudinal Guided Waves in Water-filled Steel Pipes and Its Applications to Defect Detection

Z.H. Liu*, C.F. He, B. Wu, Modern Measurement and Control Technique Laboratory, College of Mechanical Engineering and Applied Electronics Technology, Beijing University of Technology, Beijing, 100022, China, Email: liuzenghua@bjut.edu.cn

O-7: 11:20-11:40 Nondestructive Testing of Mechanical Properties of Heterogeneous Wood-Based Composite

Yingcheng Hu1, 2 *, 1Key Laboratory of Bio-based Material Science and Technology of Ministry of Education, Northeast Forestry University, Harbin, Heilongjiang 150040, China; 2College of Material Science and Engineering, Northeast Forestry University, Harbin 150040, China, Email: huyingcheng@yahoo.com.cn

Comprehensive presentation OC-1: 11:40-11:44: O-4 The Application of Computerized Tomography on Concrete Structure Visualization

Z.Q. Li1, Xi Fang1*, X.H. Song1, J.M. Lin1, Department of Engineering Structures and Mechanics, School of Science, Wuhan University of Technology, Wuhan, Hubei 430070, China, Email: fangxi@whut.edu.cn

Poster presentation of Session j4 O-1: Damage Identification of Heterogeneous Materials Based On Vibration and Information Fusion

T. Liu *, A.Q. Li, Y.L. Ding, D.L. Zhao, School of Civil Engineering, Southeast University, Nanjing, Jiangsu 210096, China, Email: lt5402@163.com

11:44-12:20 Discussion j4: How can fine scale experiments interplay with NDE methods and sensors?

Session k1: Scale effects and multiscale modeling (1) June 4 (wed), 8:00-10:00, Room 2 Co-Chairs: T. Kitamura, Kyoto University, Japan X. Q. Feng, Tsinghua University B-9: Invited talk, 8:00-8:25 Size effect in the deformation and failure of metallic glass

Ju Li1*, Department of Materials Science and Engineering, University of Pennsylvania, Philadelphia, PA 19104-6272, USA, Email: liju@seas.upenn.edu

B-4: 8:25-8:45 Multiscale Modeling for Static Contact Problems of Foamed Al. Y.Z. Zhang *, Y.H.Ying, Institute of Structural Mechanics, CAEP, MianYang, SiChuan, 621900, China, Email: zhangyuanzhang@vip.sohu.com

B-6: 8:45-9:05 Modeling, Simulation, and In-situ Characterization of Functionally Graded Porous Electrodes for Solid Oxide Fuel Cells

Matt Lynch, Harry Abernathy, YongMan Choi and Meilin Liu, Center for Innovative Fuel Cell and Battery Technologies School of Materials Science and Engineering Georgia Institute of Technology, 771 Ferst Drive, Atlanta, Email: meilin.liu@mse.gatech.edu

B-10: 9:05-9:25 Recent Advances in Multi-Scale Simulation of Mechanical Responses of Ultrananocrystalline Diamond

Luming Shen1* and Zhen Chen2, 1Department of Civil Engineering, Clayton Campus, Monash University, Victoria 3800, Australia; 2Department of Civil and Environmental Engineering, University of Missouri Columbia, MO 65211, USA, and Department of Engineering Mechanics, Dalian University of Technology, Dalian 116024, China, Email: Luming.Shen@eng.monash.edu.au

9:25-10:00 Discussion k1: How has/will multiscale modelling impact(ed) on engineering methodology and how can we best model the transition from one scale to another?

Session k2: Scale effects and multiscale modeling (2) June 4 (wed), 10:20-12:20, Room 2 Co-Chairs: Meilin Liu, Georgia Institute of Technology, USA Y. C. Zhou, Xiangtan University B-8: B-25: Keynote Talk 10:20-10:50 Multi-scale plasticity modeling: coupled discrete dislocation and continuum crystal plasticity

W.A. Curtin1*, M. Wallin2, M. Ristinmaa2, A. Needleman1, 1Division of Engineering, Brown University, Providence, RI 02912 USA; 2Division of Solid Mech., Lund University, Box 118, 22100 Lund, Sweden, Email: curtin@engin.brown.edu

B-26: 10:50-11:10 An Internal State Variable Model of Micropolar Elasto-Vicoplasticity 1Douglas J. Bammann, 2Jason Mayeur, 2David L. McDowell, 1Mississippi State University, Starkville, MS 39759 USA; 2Georgia Tech, Atlanta GA USA, Email: bammann@me.msstate.edu

B-14: 11:10-11:30 Micropolar Continuum Modeling of 2-D Periodic Cellular Solids and A Fast Mapping Algorithm for Micro-stress

Niu Bin1, Yan Jun*1, Cheng Gengdong1, State Key Lab. of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics,Dalian University of Technology, Dalian 116024, People’s Republic of China, Email: yanjun@dl.cn

C-5: 11:30-11:50 Interface Atomic Bonding and Mechanical Properties of Al-Li-Sc-Zr Alloys Gao Ying-jun*, Zhang Li-na, Chen Hua-ning, Li Jian-Xun, Mo Qi-feng, School of Physics Science and

Engineering, Guangxi University, Nanning 530004, China, Email:Gaoyj@gxu.edu.cn 11:50-12:20 Discussion k2: How has/will multiscale modelling impact engineering methodology and how can we select appropriate methods for transition from one scale to another?

Session k3: Scale effects and multiscale modeling (3) June 4 (wed), 13:30-15:30, Room 2 Co-Chairs: S.P.A.Gill, University of Leicester, UK T. Takaki, Kyoto Institute of Technology, Japan B-42: Keynote Talk 13:30-14:00 Size Effects in Small Scale Structures

H.M. Zbib, F. Akasheh and D. Bahr, School of Mechanical and Materials Engineering, Washington State University, Pullman, WA 99164-2920, USA, Email:zbib@wsu.edu

B-43: Invited talk 14:00-14:25 The Statistical Two-order and Two-scale Method for Structural Analysis of Composites with Non-stationary Stochastic Distribution

Junzhi Cui1, Fei Han2, Yan Yu2, 1 Academy of Mathematics and System Sciences, Chinese Academy of Sciences, Beijing, 100080 China; 2 Department of Applied Mathematics, NorthWestern Polytechnical University, Xi’an, 710072 China, Email: cjz@lsec.cc.ac.cn

B-16: 14:25-14:45 Physically based crystal plasticity modelling of nano-indentation H. Liang1*, F. P. E. Dunne1, A. J. Wilkinson2, 1Department of Engineering Science, Oxford University, Parks Road, Oxford OX1 3PJ, UK; 2Department of Materials, Oxford University, Parks Road, Oxford OX1 3PH, UK, Email: hong.liang@eng.ox.ac.uk

B-20:14:45-15:05 Local Lattice Instability Analysis on Nano-polycrystalline and Amorphous Metals: Role of Unstable Atoms under Tension and Compression

K. Yashiro1*, M. Nishimura2, M. Higuchi2, Y. Tomita1, 1Department of Mechanical Engineering, Graduate School of Engineering, Kobe University, 1-1, Rokkodai, Nada Kobe 657-8501, Japan; 2Student of Graduate School of Engineering, Kobe University, Email: yashiro@mech.kobe-u.ac.jp

15:05- 15:30 Discussion: How has/will multiscale modelling impact engineering methodology and how can we select appropriate methods for transition from one scale to another?

Session k4: Scale effects and multiscale modeling (4) June 4 (wed), 15:50-18:00, Room 2 Co-Chairs: N. Ohno, Nagoya University, Japan G.Z. Kang, Southwest Jiaotong University B-18: Keynote Talk 15:50-16:20 Grain-Size Dependent Yield Behavior of Polycrystals at Sub-Micron and Micron Scales

N. Ohno 1*, T. Shibata 1, D. Okumura 1, 1Department of Mechanical Science and Engineering, Nagoya University, Chikusa-ku, Nagoya 464-8603, Japan, Email: ohno@mech.nagoya-u.ac.jp

B-15: Invited talk 16:20-16:45 Compatible continuum and atomistic models of surface diffusion S. P. A. Gill*, K. Jolley, Department of Engineering, University Road, University of Leicester, UK, LE1 7RH, Email: spg3@le.ac.uk

B-2: 16:45-17:05 Determination of the Microscale Stress-Strain Curve and Strain Gradient Effect from the Micro-bend of Ultra-thin Beams

Z.F. Shi1*, B. Huang2, H. Tan3, Y. Huang, T.Y. Zhang2, P.D. Wu, K.C. Hwang1, H. Gao, 1FML, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China; 2Dept. of Mechanical Engineering, University of Science and Technology, Hong Kong, China; 3Dept. of Mechanical Science and Engineering, University of Illinois, Urbana, IL 61801, USA, Email: scf05@mails.thu.edu.cn

B-22: 17:05-17:25 Molecular Dynamics Simulations on the Deformation Mechanism of Multi-grain Shape-memory Alloy

T. Uehara1*, C. Asai2, N. Ohno2, 1Dept. Mechanical Systems Engineering, Yamagata University Jonan 4-3-16, Yonezawa, Yamagata 992-8510, Japan; 2Dept. Computational Science and Engineering, Nagoya University Furo-cho, Chikusa-ku, Nagoya 464-8603, Japan, Email: uehara@yz.yamagata-u.ac.jp

17:25-18:00 Discussion k4: How have multiscale modelling methods provided new insights into physical problem? What classes of problems are best suited to concurrent or hierarchical multiscale methods?

Session k5: Scale effects and multiscale modeling (5) June 5 (Thursday), 8:00-10:00, Room 2 Co-Chairs: Gerhard Dehm, Austrian Academy of Sciences Y. J. Lan, University of Sheffield, UK Keynote talk 8:00-8:30: Mechanical size-effects in miniaturized and bulk material

Gerhard Dehm D. Kiener, S. Oh, R. Pippan, M. Legros*, L. Cha**, C. Scheu**, H. Clemens**, P. Gruber*** Erich Schmid Institute for Materials Science, Austrian Academy of Sciences, and Department Materials Physics, Montanuniv. Leoben, Leoben, Austria, *CNRS/CEMES, Toulouse, France, **Department Physical Metallurgy and Materials Testing, Montanuniv. Leoben, Leoben, Austria, ***Max Planck Institute for Metals Research Stuttgart, Germany.

B-5: Invited Talk 8:30-8:55 Multiscale Analysis of Interfacial Shearing Behavior between Biocells and Implant

Jinghong Fan1*, Mauro Chinappi2, 1School of Engineering, Alfred University, New York, 14802, USA & RCMM, ChongQing University, ChongQing 14802, China; 2Department of Mechanics and Aeronautics, University of Rome "La Sapienza", via Eudossiana 18, 00184, Rome, Italy, Email: fanjing@alfred.edu

B-29: 8:55-9:15 Dislocation dynamics and strain heterogeneities in ice single crytals: experiments and multiscale simulations

J. Chevy1, 2, M.C. Fivel1*, P. Duval2, 1SIMaP-GPM2, Grenoble INP/CNRS, BP 46, 38402 St Martin d’Hères cedex, France; 2LGGE, UJF/CNRS, 54 rue Molière, 38402 St Martin d’Hères cedex, France, Email: Marc.Fivel@gpm2.inpg.fr

B-35: 9:15-9:35 Wave Propagation in Elastic Media with Nanostructures G.L. Huang1* and C.T. Sun2, 1Department of Systems Engineering, University of Arkansas at Little Rock, Little Rock, AR, 72211, USA; 2School of Aeronautics and Astronautics, Purdue University, West Lafayette, 47907, USA; Email: glhuang@ualr.edu

Comprehensive presentation BC-1 9:35-9:39 B-39 Determination of Double-K Fracture Toughness of Concrete via Size Effect Law R.L. Hu*, P.Y. Huang, G.W. Liu, College of Traffic & Communications, South China Univ. of Tech.,

Guangzhou, 510641, China; Email: hrl518@tom.com ericsun007@163.com 9:39-10:00 Discussion k5: How have multiscale modelling methods provided new insights into physical problem? What classes of problems are best suited to concurrent or hierarchical multiscale methods?

Session k6: Scale effects and multiscale modeling (6) June 5 (Thursday), 10:20-12:20, Room 2 Co-Chairs: H. Zbib, Washington State University, USA Jie Li, Tong Ji University B-32: Invited Talk 10:20-10:45 On grain size dependence of stress hysteresis in shape memory alloy polycrystals: Role of material internal length scales

Q.P. SUN1*, Y.J. HE2, 1, 2Department of Mechanical Engineering The Hong Kong University of Science and Technology, Clear Water Bay, Hong Kong, China, Email: meqpsun@ust.hk

B-37: Invited Talk 10:45-11:10 The Macroscopic and Mesoscopic Multiscale Simulation in Fracture Process of Three-point-bending Concrete Beam

R. Zhang1, 2*, Z.P. Tang1, 1CAS Key Laboratory Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, 230026, China; 2Key Laboratory of Terrain-machine Bionics Engineering, Ministry of Education, Jilin University, Changchun 130022, China, Email: rzhang@ustc.edu.cn

B-12: 11:10-11:30 Phase-Field Simulation of Mechanical Behavior and Microstructure Evolution during Dynamic Recrystallization

T. Takaki1*, Y. Tomita2, 1Graduate School of Science and Technology, Kyoto Institute of Technology, Matsugasaki, Sakyo, Kyoto, 606-8585, Japan; 2Graduate School of Engineering, Kobe University, Rokkodai, Nada, Kobe, 657-8501, Japan Email: takaki@mech.kit.ac.jp

11:30-12:20 Discussion k6: How have multiscale modelling methods provided new insights into physical problem? What classes of problems are best suited to concurrent or hierarchical multiscale methods?

Session l: Multi-physics modeling June 5 (Th), 13:30-15:30, Room 2 Co-Chairs: Ju Li, University of Pennsylvania, USA Qingsheng Yang, Beijing University of Technology E-3: Invited talk 13:30-13:55 Soft Chemistry for nano-Material Synthesis

P. Pramanik，Nano-material Laboratory, Department of chemistry，Indian Institute of Technology，Kharagpur-721302, India, Email: panchanan_123@yahoo.com

C-15: 13:55-14:15 Multi-physical Phenomena in Coal Associated with Coalbed Methane Recovery and CO2 Geo-sequestration

G.X. Wang*, P. Massarotto, V. Rudolph, School of Engineering, The University of Queensland, St Lucia, Qld 4074, AUSTRALIA, E-mail: gxwang@uq.edu.au

C-6: 14:15-14:35 A theory and numerical method for chemo-mechanical coupling behavior of heterogeneous materials

Qingsheng Yang*, Baosheng Liu, Dept. of Engineering Mechanics, Beijing University of Technology, Beijing 100022, China; Email: qsyang@bjut.edu.cn

C-13: 14:35-14:55 Modelling of Structure Development with High Gradient of the Changes of Physical Parameters

B. Mašek1+2*, H. Staňková1+2, A. Ronešová1, D. Klauberová1, 1University of West Bohemia in Pilsen, FORTECH, Univerzitní 8, 30614, Pilsen, Czech Republic 2Chemnitz University of Technology, Faculty of Mechanical Engineering, Institute of Materials and Impact Engineering, 09126, Chemnitz, Germany, Email: hstankov@kmm.zcu.cz

Q-5: 14:55-15:15 Chemical and Physical Characteristics of the Single Crystal Silicon Surface Polished by the Atmospheric Pressure Plasma Polishing (APPP) Method

B. Wang, J.F. Zhang1*, S. Dong1, Y.S. Wang1, Center for Precision Engineering, Harbin Institute of Technology, Harbin, Heilongjiang,150001,China, Email: zhangjufan@hotmail.com

Comprehensive presentation CC-1 15:15-15:19 C-7 The effect of non-uniform electromagnetic field on metallic heat conduction

Huijuan Bai and Xiaojing Zheng**, Department of Mechanics and Engineering Science, Lanzhou University, Lanzhou, Gansu , 730000, P. R. China, Email: xjzheng@lzu.edu.cn

15:19-15:30 Discussion l: What are the main features and challenges of multi-physics simulations?

Session m1: Materials design (1) June 5 (Th), 13:30-15:30, Room 1 Co-Chairs: D.L. McDowell, Georgia Institute of Technology, USA Yuan Lin, Harbin Institute of Technology C-10: Invited Talk 13:30-13:55 Materials design from bottom to up based on the multi-scale computation framework Z. Zhuang, Z.L. Liu, X.C. You, Y. Guo, Dept. of Eng. Mechanics, School of Aerospace, Tsinghua

University, Beijing, 100084, China; Email: zhuangz@tsinghua.edu.cn H-5: 16:55-17:15 Multifunctional design of 2D combinational lattice materials

B. Wang*, B. Niu, S.L. Xu, X. Zhang, G.D. Cheng, State Key Laboratory of Structural Analysis for Industrial Equipments, Department of Engineering Mechanics, Dalian University of Technology, Dalian 116023, China, Email: wangbo@dlut.edu.cn

C-11: 17:15-17:35 Dislocation Theory Based Modeling for Short/Small Crack Growth in Aircraft Aluminum Alloys

Min Liao, Structures and Materials Performance Laboratory Institute for Aerospace Research (IAR), National Research Council Canada (NRC) Ottawa, Canada K1A 0R6, Email: min.liao@nrc-cnrc.gc.ca

E-4: 17:35-14:55 Analysis of the Effect of the micro-crack inclination on the plastic strain ahead of main crack in Aluminium alloy 2024 T3

M. El Meguenni1,2*, N. Selini1, 1Department of Mechanical Engineering, University of Sidi Bel Abbes, BP 89,Cité Ben M’hidi, Sidi Bel Abbes, 22000, Algeria; 2Ecole Polytechnique Universitaire de Lille, 59650 France, Email: elmeguennimohamed@yahoo.fr

Comprehensive presentation EC-1-E-9: 14:55-14:59 Investigation of material performance of RPC based on recycled crubber crumb as part aggregate

Y.Y. Shi , J. Dong1, J.X. Zhao, S.M. Song, School of Civil Engineering and Traffic Engineering, Beijing University of Civil Engineering and Architecture, Beijing, 100044, China, Email: jdongcg@263.net

EC-2-E-6: 14:59-15:03 Atomistic Simulations of Structural Relaxation Process in Amorphous Silicon Carbide

Kun Xue1, Li-Sha Niu*1, Hui-Ji Shi1, School of Aerospace, FML, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China, Email: niulsh@mail.tsinghua.edu.cn

15:03-15:30 Discussion m1: What are candidate methods for systems-based materials design methods that address material hierarchy of length and time scales, as well as hierarchy of process-structure-properties-performance?

Session m2: Materials design (2) June 5 (Th), 15:50-18:00, Room 1

Co-Chairs: H. Garmestani, Georgia Institute of Technology, USA Wei-Yu Ho, MingDao University E-15: Invited Talk 15:50-16:15 Microstructure Design of Fuel Cell Materials

Hamid Garmestani1*, Dongsheng Li1, Mo Khaleel2, 1School of Materials Science and Engineering, Georgia Institute of Technology, Atlanta, GA, 30332-0245; 2Pacific Northwest National Lab, Richland, WA 99352, Email: hamid.garmestani@mse.gatech.edu

E-10: 16:15-16: 35 Stretching Design For Plasterboard Of λ/4 Type EMW-Absorber J.J. Chen, W.J. Hao*, Y.F. Zhang, X.L. Zhao, College of Materials Science and Chemical Engineering Hainan University, Haikou, 570228, P. R. China, Email: hwj8899@163.com

C-8: 16:35-16:55 Magneto-elastic-plastic buckling and bending of Ferromagnetic Rectangular Plate with Simple Supports

Y.W. Gao*, Key laboratory of mechanics on western disaster and enviroment,College of civil engineering and mechanics, Lanzhou University, Lanzhou, 730000, P. R. China, Email: ywgao@lzu.edu.cn

B-40 16:55-11:15 Special Finite Element-based Unit Cell Approach for the Prediction of Mechanical Properties of Foamed Titanium By: Chunhui Yang1*, Yixia Zhang2, Bernard Frank Rolfe1, 1School of Engineering and Information

Technology, Faculty of Science and Technology, Deakin University, Waurn Ponds, VIC 3217, Australia; 2School of Aerospace, Civil and Mechanical Engineering, The University of New South Wales, Australian Defence Force Academy, Canberra, ACT 2600, Australia, Email: chunhui.yang@deakin.edu.au

Comprehensive presentation EC-3-E-7: 17:15-17:19 Relations Between Distribution of Fibers and Mechanical Performance of Polypropylene Fiber Reinforced Concrete

Chen-guang Jiang1*, Chun-qiao Yuan2 , 1College of Civil Engineering, Jiangnan University, Jiangsu Wuxi 214122, P. R. China; 2Planning Information Center of Yantai City, Yantai, Shandong 264003, P. R. China, Email: jiangcg999@yahoo.cn

EC-4-E-19: 17:19-17:23 THE DESIGN OF ADJUST CONTROL TECHNOLOGY OF THE GIVEN-FORCE IN THE SUBSOIL TREATMENT

Xanjiang Han*, Tonghua Wang, Jinchuan Sun, Xiang Zhao, College of Civil Engineering, Nanjing University of Technology Nanjing 210009 P. R. China, Email: hannian@njut.edu.cn

17:23-18:00 Discussion m2: What are candidate methods for systems-based materials design methods that address material hierarchy of length and time scales, as well as hierarchy of process-structure-properties-performance? – Context of following posters Poster presentation of Session m E-2: Research on the Strength and Toughness of Self-lubricating Material with Cell-pore Structures

Fang Xie*, Zuomin Liu, Y. J. Wang, The Institute of Tribology of Wuhan University of Technology, Wuhan, Hubei 430070, China, Email: xiefang811222@163.com

E-5: Microstructure Topology Optimization of Multiphase Material using Immune Genetic Algorithm D. W. Lu1, 2*, S. Li1, S. Ren1, School of Aeronautic Science and Engineering, Beihang University, Beijing, 100083, China; Email: ludawei@ase.buaa.edu.cn

E-13: Investigation on the optimal design of multiphase porous materials

S.P. Sun1*, W.H. Zhang2, G.H. Qin1, 1Aeronautic and Mechanical Engineering College, Nanchang Hangkong University, Nanchang 330063, China; 2Sino-French Laboratory of Concurrent Engineering, Northwestern Polytechnical University, Xi’an 710072, China, Email: sunsping@126.com

E-16: Mix Ratio Design and Orthogonal Experiment Research of Self-Compacting Shrinkage-Compensating Concrete

Xiaocong Lv1*, Jinyu Xu1,2, Zengyun Zhang1, The Engineering Institute, Air Force Engineering University, Xi’an, Shaanxi 710038, China; Email: nuc6140@yeah.net

E-18: Electron beam irradiated hollow fiber nanofiltration membrane Guo dong Li, Wei Wang , Q.Y. Du, Key Laboratory of Hollow Fiber Membrane Materials and Membrane Process of Ministry of Education, Tianjin P0lytechnic University, Tianjin, 300160, China, Email: wangwei7126@126.com

Session o1: Properties and characteristics of biomaterials (1) June 5 (Thursday), 8:00-10:00, Room 4 Co-Chairs: H. J. Gao, Brown University, USA M. Kroon, Royal Institute of Technology, Sweden F-26: Keynote talk 8:00-8:30 Dynamics of the cytoskeleton: a portrait of living cell or nonequilibral and heterogeneous materials

Linghong Deng, Bioengineering College, Chongqing University, Email: denglh@cqu.edu.cn Fc-2: 8:30-8:50 Hierarchical nanomechanics of protein materials: Robustness, strength, and adaptability

M.J. Buehler 1*, S. Keten1, T. Ackbarow1, Laboratory for Atomistic and Molecular Mechanics, Department of Civil and Environmental Engineering,Massachusetts Institute of Technology, Email: mbuehler@MIT.EDU

F-10: 8:50-9:10 Biomimetic Processing of Nanocrystallite Bioactive Apatite Coating on Titanium-Zirconium Alloy

X.B. Chen, Y.C. Li, J.G. Lin, P.D. Hodgson and C.E. Wen*, Centre for Material and Fibre Innovation, Geelong Technology Precinct, Deakin University, Waurn Ponds, VIC 3217, Australia, Email: cwen@deakin.edu.au

F-3: 9:10-9:30 Instantaneous Surface Stresses of Swelling and Drying of Polymeric Gels Jinxiong Zhou1*, Wei Hong2, Xuanhe Zhao2, Zhigang Suo2, 1MOE Key Laboratory for Strength and Vibration, School of Aerospace, Xi’an Jiaotong Unviersity, Xi’an 710049, China; 2School of Engineering and Applied Sciences, Harvard University, Cambridge, MA 02138, USA; Email: jxzhouxx@mail.xjtu.edu.cn

9:30-10:00 Discussion o1: What are challenges and opportunities for hierarchical multiscale simulations of biological materials?

Session o2: Properties and Characteristics of biomaterials (2) June 5 (Friday), 10:20-12:20, Room 4 Co-Chairs: Linghong Deng, Chongqing University J.F. Molinari, Computational Solid Mechanics Laboratory, Switzerland

F-24: Invited talk 10:20-10:45 Why a mosquito can reside on water surface and adhere to ceiling ?

C.W. Wu*, X.Q. Kong, State Key Laboratory of Structural Analysis for Industrial Equipment, Faculty of Vehicle Engineering and Mechanics, Dalian University of Technology, Dalian 116023, China; Email:cwwu@dlut.edu.cn

F-12: 11:05-11:25 Mechanical Properties of Porous Ti-26at.%Nb Alloy for Regenerative Medicine J.Y. Xiong, Y.C. Li*, P.D. Hodgson, C.E. Wen, Centre for Material and Fibre Innovation, Deakin University, Geelong, Victoria 3217, Australia, Email: jxio@deakin.edu.au

F-21: 11:25-11:45 Mechanical Properties of Staggered-alignment Biomimetic Composites Z.Q. Zhang*, Y. Zhong, B. Liu, D.N. Fang, K.C. Hwang, Department of Engineering Mechanics, Tsinghua University, Beijing, 100084, China; Email: zhangzuoqi03@mails.tsinghua.edu.cn

F-2: 8:30-8:50 An effective bead-spring model for polymer simulation B. Liu1*, J.Z. Wang2, X.J. Fan2, Y. Kong3, H.J. Gao2, 1Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China; 2Division of Engineering, Brown University, Providence, RI 02912, USA; 3ICX Radiation GmbH, Koelner Str. 99, 42651 Solingen, German, Email: liubin@tsinghua.edu.cn

Comprehensive presentation FC-2: 11:45-11:49: F-7 Hierarchical nanomechanics of protein materials: Robustness,strength and adaptability FC-3: 11:49-11:53: A-39 Modeling Electric Double Layer Structure in heterogeneous Biological Nanochannels

Fuzhi Lu, Daniel Y. Kwok, Department of Mechanical & Manufacturing Engineering, University of Calgary, Calgary, Canada, T2N 1N4, Email:luf@ucalgary.ca

F-6: 11:53-11:57: Current trend and future directions of biomaterials for hard tissue replacement and their testing

A. Srivastav1, 2, College of Engineering & Technology, IFTM, Moradabad, INDIA; Department of Mechanical & Industrial Engineering, Caledonian College of Engineering, Muscat, Oman, Email: sri_anupam2003@yahoo.co.in

11:57-12:20 Discussion o2: What are challenges and opportunities for hierarchical multiscale simulations of biological materials?

Session o3: Properties and characteristics of biomaterials (3) June 6 (Friday), 10:20-12:20, Room 4 Co-Chairs: Taher Saif, University of Illinois at Urbana-Champaign Urbana, USA

X. Q. Feng, Tsinghua University F-1: 10:20-10:40 Modelling of thin anisotropic collagen-dominated soft biological tissue

M. Kroon*, G.A. Holzapfel, Department of Solid Mechanics, Royal Institute of Technology, Stockholm, Sweden, Email: martin@hallf.kth.se

F-23: 10:40-11:00 Bone Topology Optimization based on the Reaction-diffusion Model under Different Boundary Condition

Mamtimin Geni1*, Lihua Jia1, Xamxinur Abdikerem2, Nijat Yusuf1 and Masanori Kikuchi3, 1School of Mechanical Engineering, Xinjiang University, 21 Youhaobeilu, Urumqi, China; 2School of Geography

and Tourism, Xinjiang Normal University, 102 Xinyilu, Urumqi, China; 3Department of Mechanical Engineering, Tokyo University of Science, Noda, Chiba, Japan; Email: mgheni@263.net

F-19: 11:00-11:20 A Study on the Effect of Torsions on the Strength of Adhesive Contact X. Guo* and D.W. Huang, State Key Laboratory of Structural Analysis for Industrial Equipment

Department of Engineering Mechanics Dalian University of Technology, Dalian 116024, P. R. China, Email: guoxu@dlut.edu.cn

F-27: 11:20-11:40 Quantifying rupture force and bond lifetime of P-selectin-PSGL-1 interactions at lower forces

Yan Zhang, GanYun Sun, Bo Huo, M. Long*, National Microgravity Laboratory and Center for Biomechanics and Bioengineering, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, China, Email: mlong@imech.ac.cn

Comprehensive presentation F-22 11:40-11:44 A Monte Carlo approach for studying the behavior of natural and bio-inspired fibrillar adhesive pads

M. Safdari1, M. Baniassadi2, M.Fathi3, 1Department of Mechanical Engineering, Wichita state university, Wichita, KS, USA, 2Institute of Knowledge Based System and Knowledge Management, University of Siegen, Siegen, Germany, 3Institute of Knowledge Based System and Knowledge Management, University of Siegen, Siegen, Germany.Email: msafdari@gmail.com

11:44-12:20 Discussion o3: What are challenges and opportunities for hierarchical multiscale simulations of biological materials? Poster presentation of Session o F-4 The Size Effect of Receptor-Mediated Endocytosis

S.J. Wang1*, X. Li1, College of Engineering & Technology, Southwest University, Chongqing 400716, PR China; Email: shjwang@mail.ustc.edu.cn

F-11: Preliminary Study to Dynamic Mechanical Properties of the Goat’s Phalanxes Tao Jun-lin, Yao Yong, Zhang Yu, Chen Guo-ping, Dpartment of Divil Engneering and Architecture, Southwest University of science and Technology, Mianyang, Sichuan 621010, China; Institute of Structural Mechanics, China Academy of Engineering Physics, Mianyang, Sichuan 621900,China; Email: junlintao@126.com

H-9: Recent Trends in low grade wood polymer composites modification technologies and their mechanical and thermal characterization By: Manoj Kumar1, A. Srivastav1, 2, P.L. Sah3 and M.G.H. Jaidi3, Department of Mechanical Engineering,

College of Engineering & Technology, IFTM, Moradabad, Uttar Pradesh, India, Email: sri_anupam2003@yahoo.co.in

Session p1: Smart materials (1) June 4 (wed), 8:00-10:00, Room 3 Co-Chairs: K.Sanada, Toyama Prefectural University, Japan Daining Fang, Tsinghua University G-12: Invited talk 8:00-8:25 Multi-field Coupling Behavior of Electromagnetic Materials

Xiaojing Zheng, Department of Mechanics and Engineering Science, Lanzhou University, Lanzhou, Gansu, 730000, P. R. China; Email: xjzheng@lzu.edu.cn

G-1: 8:25-8:45 Effects of Several Parameters on the Electrical Properties of conductive asphalt concrete

B. Gao1, S.P. Wu*, B. Li1, X.M. Liu1, Key Laboratory of Silicate Materials Science and Engineering of Ministry of Education, Wuhan University of Technology, Wuhan, Hubei 430070, China; Email: lip@whut.edu.cn

G-6: 8:45-9:05 An inverse-pole-figure method for analysis of ferroelectric/ferroelastic polycrystalline F.X. Li, LTCS and College of Engineering, Peking University, Beijing, 100871, China; Email: lifaxin@coe.pku.edu.cn

G-41: 9:05-9:25 Near tip stress intensity factor of a surface edge-crack in PZT thin films with 90º domain switching due to a thermal loading

B. Wu1*, X.J. Zheng1, 2, D.H. Li1, 1Faculty of Materials, Optoelectronics and Physics, Xiangtan University, Xiangtan, Hunan, 411105, China; 2Key Laboratory of Low Dimensional Materials & Application Technology (Xiangtan University), Ministry of Education, Xiangtan, Hunan, 411105, China; Email: bwu@xtu.edu.cn

Comprehensive presentation GC-1: 9:25-9:29: G-16 Experimental researches on magneto-thermo-mechanical dynamic performance of Terfenol-D

Yirui Liang*, Xiaojing Zheng, Department of Mechanics and Engineering Science,Lanzhou University, Lanzhou, Gansu, 730000, P. R. China, Email: liangyr04@lzu.cn

GC-2: 9:29-9:33: G-47 Influence of Curing Time on the Anisotropic Microstructure of Magnetorheological Elastome

J.F. Li and X.L. Gong*, CAS Key Laboratory of Mechanical Behavior and Design of Materials, Department of Modern Mechanics, University of Science and Technology of China（USTC）, Hefei 230027, China, Email: gongxl@ustc.edu.cn

GC-3: 9:33-9:37: G-18 A Microstructure Based Constitutive Model for the Pseudoelastic Behavior of NiTi SMAs Subjected to Nonproportional Loading

W.L. Pi*, X.H. Peng, X.S. Long, Department of Engineering Mechanics, Chongqing University, Chongqing, 400044, China, Email: piwenli@yahoo.com.cn

GC-4: 9:37-9:41 G-51 The Solution of Piezoelectric Material with Homogeneous Shear along the Rim of Elliptical Hole Liu Yonggui*, Xu Songlin, S.H. Liu, CAS Key Laboratory for Mechanical Behavior and Design of

Materials, University of Science and Technology of China, Hefei 230027, China; Email: liuyongg@mail.ustc.edu.cn

9:41-10:00 Discussion p1: What are the prospects for developing smart materials?

Session p2: Smart materials (2) June 4 (wed), 10:20-12:20, Room 3 Co-Chairs: Y.C. Zhou, Xiangtan University M. Petrenec, Academy of Sciences of the Czech Republic G-13: 10:20-10:40 Optical Bending Moment and Light-induced Deflection of Photochromic Liquid Crystal Elastomers

L.H. Jin*, Y. Yan, Y.Z. Huo, Y. Yan, Department of Mechanics and Engineering Science, Fudan University, Shanghai, China, 200433; Email: yzhuo@fudan.edu.cn

G-7: 10:40-11:00 Bleustein-Gulyaev Waves in a Functionally Graded Piezoelectric Material (FGPM) Layered System

X.S. Cao1, F. Jin1*, Z.K. Wang1, T.J. Lu1, MOE Key Laboratory for Strength and Vibration/Department of Engineering Mechanics, Xi’an Jiaotong University, Xi’an 710049, China; Email: jinfengzhao@263.net

G-50: 11:00-11:20 Numerical Study on the Morphing Inflatable Wing Actuated by Pneumatic Cells Z.F. Yu*, Institute of Aerospace Science & Technology Shanghai Jiao Tong University, Minhang Zone, Shanghai, 200240, China; Email: yuzf@sjtu.edu.cn

G-52: 11:20-11:40 Fabrication of Nylon nano composite fibers for Antifungal Textile applications Vijaya K. Rangari*, Ghouse M. Mohammad and Shaik Jeelani, Center for Advanced materials,

Tuskegee University, Tuskegee, AL 36088; Email: RANGARIV@Tuskegee.Edu G-14: 11:40-12:00 Effect of Microstructure on the Performance of Unidirectional Fiber Composites Encompassing Self-Healing of Interfacial Debonding

K.Sanada1*, N.Itaya1, Y. Shindo2, 1Department of Mechanical Systems Engineering, Faculty of Engineering,Toyama Prefectural University, Kurokawa 5180, Imizu, Toyama 939-0398, Japan, 2Department of Materials Processing, Graduate School of Engineering, Tohoku University, Aoba-yama 6-6-02, Sendai 980-8579, Japan, Email: sanada@pu-toyama.ac.jp

Session p3: Smart materials (3) June 4 (wed), 15:50-18:00, Room 3 Co-Chairs: Xiaojing Zheng, Lanzhou University Gerhard Dehm, Institute for Materials Science, Austrian Academy of Sciences G-46: 15:50-16:10 A model of phase transition from austenite to martensite in single-crystal NiMnGa alloys

Y.M. Pei1, D.N. Fang2*, 1School of Science, Beijing Institute of Technology, Beijing 100081, China; 2FML, Department of Engineering Mechanics, Tsinghua University, Beijing 100084, China, Email: peiym@bit.edu.cn

G-42: 16:10-16:30 Application of Fractional Calculus on the study of Magnetorheological fluids’ rheological characterization

Bingsan Chen*, Yijian Huang, Department of Electro-mechanical Engineering University of Huaqiao, Quan Zhou, Fujian 362021,China, Email: bschen126@163.com

G-43: 16:30-16:50 Rheological model of Electrorheological Fluid with Fractional Order Derivative Yijian Huang, Bingsan Chen* , Department of Electro-mechanical Engineering University of Huaqiao, Quan Zhou, Fujian 362021,China, Email: yihuang@hqu.edu.cn

G-54: 16:50-17:10 Buckling Analysis of the Electrode Delamination Deposited on the Piezoelectric Substrate

C.J. Yang* (Chang-jin Yang), Y.C. Li (Yao-chen Li), School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, P. R. China; Email:yangchangjin516@sina.com

Comprehensive presentation

GC-5: 17:10-17:14: G-28 Finite-part Integral Method to Solve Three-dimensional Crack Problems in Electromagnetothermoelastic Multiphase Composites T.Y. Qin*, B.J. Zhu, College of Science, China Agricultural University, Beijing,100083, P. R. China; Email: tyqin@cau.edu.cn

GC-6: 17:14-17:18: G-30 Cyclic and Monotonic behavior of Epoxy Shape Memory Polymer Foam Ken Gall and David L. McDowell; Matthew A. Di Prima and Martha Lesniewski; Terry Sanderson; Douglas Campbell, School of Materials Science and Engineering, Georgia Institute of Technology; Woodruff School of Mechanical Engineering, Georgia Institute of Technology, Email: ken.gall@mse.gatech.edu

GC-7: 17:18-17:22: G-48 Two-Dimensional Problems of Quasicrystals with an Elliptic Inclusion or Hole

Yang Gao1*, Bao-Sheng Zhao2, 1College of Science, China Agricultural University, Beijing 100083, China, 2School of Mechanical Engineering, University of Science and Technology Liaoning, Anshan 114044, P. R. China; Email: gaoyangg@gmail.com

GC-8: 17:22-17:26: G-49 Numerical simulation of dynamics of ferromagnetic particles in MRFs under static magnetic fields

Chengjian Yi*, Xianghe Peng, Haitao Li, Department of Engineering Mechanics, Chongqing University, Chongqing 400044, China; Email: yichengjian001@sohu.com

GC-9: 17:26-17:30: G-23 Interface Effect of Fiber and Matrix in Carbon Fiber Compound Material Y. Lv1*, Z.Q. Li 1, X.H Song1, J. Wu1, 1Department of Engineering Structures and Mechanics, School of Science, Wuhan University of Technology, Wuhan, Hubei 430070, China, Email: lvyonghl@163.com

GC-10: 17:30-17:34: G-25 Dynamic Response of Carbon Fiber Smart Layers H.S. Zheng1*, D.H. Wu1, Z.Q. Li1, X.H. Song1, D. Liu1, 1Department of Engineering Structures and Mechanics, School of Science, Wuhan University of Technology, Wuhan, Hubei 430070, China, Email: whutzhs@sina.com

Session p4: Multi-physics modeling and applications June 5 (Th), 15:50-18:00, Room 3 Co-Chairs: T. C. Wang, Institute of Mechanics, Chinese Academy of Science T. Hattori, Gifu University, Japan G-24: 15:50-16:10 Diffraction of antiplane shear waves in a magneto-electro-elastic laminate with a vertical crack

L. Ma*, L.Z. Wu, Center for Composite Materials, Harbin Institute of Technology, Harbin 150080, China, Email: mali@hit.edu.cn

G-21: 16:10-16:30 Dynamic Model of Seat-Buffer with MR-Damper in Re-entry Capsule Y. Xie1*, Y.J. Lei1, D.K. Li1, 1College of Aerospace and Material Engineering, National University of Defense Technology, Hunan, Changsha, 410073, China, Email: xxyy80@163.com

G-56: 16:30-16:50 Crack-tip Stress Fields for an Arbitrarily Oriented Crack in a Functionally Graded Material Yao Dai1*, Xiu-fa Yan1, Chang-qing Sun1, Wei Tan2, C.Q. SUN1, 1 Department of Mechanical

Department, Armored Force Engineering College, Beijing 100072, China; Email: yao_dai@yahoo.com.cn or dai_yao@sina.com

G-29: 16:50-17:10 Orientation and stability of domain walls in ferroelectric crystals

Y.Y. Liu1,2*, S.H. Xie1,2, J.Y. Li1,3, 1Key Laboratory of Low Dimensional Materials and Application Technology of Ministry of Education, Xiangtan University, Hunan, 411105, China; 2Faculty of Materials, Optoelectronics and Physics, Xiangtan University, Hunan, 411105, China; 3Department of Mechanical Engineering, University of Washington, Seattle, Washington 98195-2600, USA , Email: yunyaliuxtu@yahoo.com.cn

G-57: 17:10-17:30 Mechanical Behavior on Rubber Spherically Granular Material Xin-chun Shang1*, Li-li Zhang2 , Li-ping Qing3, 1Department of Mathematics and Mechanics, University of Science and Technology Beijing, 100083 Beijing, China ( ashangxc@public3.bta.net.cn); 2Department of Engineering Mechanics, University of Nebraska-Lincoln, Lincoln, NE 68588, USA; 3Department of Civil Engineering, University of Science and Technology Beijing, 100083 Beijing, China, Email: shangxc1958@126.com

Comprehensive presentation GC-11:17:30-17:34: G-17 Effect of magnetic-elastic-thermal coupling on the dynamic behaviors of Terfenol-D rods

Ke Jin and Xiaojing Zheng**, Department of Mechanics and Engineering Science, Lanzhou University, Lanzhou, Gansu, 730000, P. R. China, Email: xjzheng@lzu.edu.cn

GC-12: 17:34-17:38: G-20 A Model of Phase Transformation Kinetics for Ferromagnetic Shape Memory Alloys

X. Wang*, F. Li, Key Laboratory of Mechanics on Western Disasters and Environment, Ministry of Education of China; College of Civil Engineering and Mechanics, Lanzhou University, Lanzhou, Gansu, 730000, China, Email: xzwang@lzu.edu.cn

17:38-18:00 Discussion p4: What are the prospects for developing smart materials? – Context of following posters Poster presentation of Session p: G-3: Experimental and Micro-Constitutive Model Study of Pb(Mg1/3Nb2/3)O3- 0.32PbTiO3 Relaxor Ferroelectric Single Crystal

Q. Wan1*, C.Q. Chen2, Y.P. Shen2, Z. Zhang3, 1Institute of Structural Mechanics, China Academy of Engineering Physics, Mianyang, 621900, Sichuan, China; 2Key Laboratory, School of Astronautics and Aeronautics, Xi’an Jiaotong University, Xi’an 710049 China; 3The Seventh Research Division Beijing University of Aeronautics & Astronautics Beijing, 100083, China, Email: wanzhenyu@126.com

G-5: Enhance mechanical performance of electrorheological fluid by patterning electrodes Minliang Zhang, Yu Tian*, Ming Zhou, Yonggang Meng and Shizhu Wen, State Key Laboratory of Tribology, Tsinghua University, Beijing 100084, P.R. China, Email: tianyu@tsinghua.edu.cn

G-10: A Penny-shaped Crack in a Functionally Graded Piezoelectric Layer under Mechanical Impact Y.S. Li*, F.P. Zhang, Z.H. Xu, Institute of Engineering Mechanics, Northeastern University, Shenyang, Liaoning 110004, China, F.P. Zhang, School of Sciences, Northeastern University, Shenyang, Liaoning 110004, China; Email: liyshbue@163.com

G-11: Basic equations for ferroelectrics Haijun Li, T.C. Wang*, State Key Lab of Nonlinear Mechanics, Institutive of Mechanics, Chinese Academy of Sciences, Beijing 100080, China, Email: tcwang@imech.ac.cn

G-22: Quantitative Analysis of Microstructure Evolution in Shape Memory Alloys during Martensitic Transformation

C. Peng, Y. Yan, Y.Z. Huo*, Department of Mechanics and Engineering Science, Fudan University, Shanghai 200433, China, Email: yzhuo@fudan.edu.cn

G-26: 11:05-11:20 Green’s Functions for A Point Heat Source in Piezothermoelastic Media Peng-Fei Hou*, Wei Luo, Li Wang, Department of Engineering Mechanics, Hunan University, Changsha 410082, PR China, Email: xiongsm@zju.edu.cn

G-40: New Magnetorheological Damper and Its Application in Semi-active Control of Structural Seismic Response

Q. Sun1*, X.H. Wu2, P. Li1, Z.W. Liu1, X.M. Xue2, 1Department of Civil Engineering, Xi'an Jiaotong University, Xi'an, Shannxi 710049, China; 2School of Aerospace, Xi’an Jiaotong University, Xi’an, 710049, China; Email: sunq@mail.xjtu.edu.cn

G-44: Effect of Surface Modification on Strain-sensing Ability of Carbon Nanofibers Composite Sensors

Qilin Mei1*, Sha Xu1, Jihui Wang1, Zhixiong Huang1, School of Material Science and Engineering,Wuhan University of Technology, Wuhan, Hubei 430070, China, Email: meiql@263.net

G-45:Three-Dimensional Analysis for the Free Vibration of Magneto-Electro-Elastic Cylindrical panels

X.H. Wu1*, Y.P. Shen1, Q. Sun2, K. Fujimoto3, 1Department of Civil Engineering, Xi’an Jiaotong University, Xi’an, Shannxi 710049, China; 2School of Aerospace, Xi’an JiaoTong University, Xi’an, 710049, China; 3Department of Aeronautics and Astronautics, the University of Tokyo, 113-8656, Japan; Email: sunq@mail.xjtu.edu.cn

G-53: A Novel pH-sensitivity Composite Nanofiltration Menbrane Wei Wang*, Guodong Li, Q.Y. Du, Key Laboratory for Hollow Fiber Membrane Materials and Membrane

Process, Ministry of Education,Institute of Membrane Science of Technology, Tianjin Polytechnic University, Tianjin 300160, China; Email: wangwei7126@126.com

Session q1: Composite and cellular materials (1) June 4 (wed), 8:00-10:00, Room 6 Co-Chairs: N. Ohno, Nagoya University, Japan Xinghua Xie, Anhui University of Science and Technology H-1: 8:00-8:20 Layered Composite Oxides Grown from Emulsion explosives

Xinghua Xie*, Huisheng Zhou, H. Zhang, H.E. Wang, School of Chemical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China, Email: xxh1963@163.com

H-2: 8:20-8:40 Nanometer spinel lithium manganate from explosive burning Xinghua Xie*, Huisheng Zhou, Shilong Yan, Hongyuan Guo, School of Chemical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China, Email: xxh1963@163.com

H-30: 8:40-9:00 Dynamic Localization due to defects in periodic metal honeycombs Y. Liu*, X.C. Zhang, Institute of Mechanics, School of Civil Engineering, Beijing Jiaotong University, Beijing, 100044, China; Email: yliu5@bjtu.edu.cn

H-77: 9:00-9:20 A Novel Thin Sheet Phase of Oriented LiZnO Composite Xinghua Xie*, Huisheng Zhou, S.L. Yan, School of Chemical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China; Email: xxh1963@163.com

P-15: 9:20-9:40 Semi-Analytical three-dimensional Elasticity Solutions for Multi-Directional Functionally Graded Plates C.F. Lü*1, 2, W.Q. Chen1, C.W. Lim2, 1Department of Civil Engineering, Zhejiang University, Hangzhou

310027, P.R. China; 2Department of Civil Engineering, Zhejiang University;Department of Building and Construction, City University of Hong Kong; Email: chenwq@zju.edu.cn

9:40-10:00 Discussion q1: What are promising future applications for and developments in cellular and composite materials?

Session q2: Composite and cellular materials (2) June 4 (wed), 10:20-12:20, Room 6 Co-Chairs: Z. Zhong, Tongji University

A.M. Dumansky, Russian Academy of Sciences, Russia H-12: 10:20-10:40 Nonlinear Thermomechanical Bending of FGM Truncated Conical Shells with Geometric Imperfection

Shi-Rong Li*, Jing-Hua Zhang, Department of Engineering Mechanics, Lanzhou University of Techonology, Lanzhou, Gansu, 730050, China, Email: lisr@lut.cn

H-14: 10:40-11:00 Modeling and Numerical Simulation of the Mechanical Behavior of Plain Weave C/SiC Composites

Yi Lv1*, GuoZhi Lv1, QingLan Zhao2, 1School of Aeronautics, Northwestern Polytechnical University, Xi’an Shaanxi, Shanxi 710072, China; 2Xi’AN Institute of Post & Telecommunications, Xi’an Shaanxi, 710061, PR China, Email: lvyi112@yahoo.com.cn

H-16: 11:00-11:20 Finite Element Method for Analysis of Band Structures of 2D Phononic Crystals Jianbao Li1*, Yuesheng Wang1, Chuanzeng Zhang2, 1Institute of Engineering Mechanics, Beijing Jiaotong University, Beijing 100044, China; 2Department of Civil Engineering, University of Siegen, D-57068 Siegen, Germany, Email: 06115205@bjtu.edu.cn

H-19: 11:20-11:40 Mechanical Properties and Fracture Behavior of Tungsten Alloys Using Finite Element Simulation

W.D. Song1*, H.Y. Liu2, J.G. Ning1, State Key Laboratory of Explosion Science and Technology, Beijing Institute of Technology, Beijing 100081, P.R. China, Email: swdgh@bit.edu.cn

H-33: 11:40-12:00 Flat Punch Indentation Analysis of Honeycomb Structures Using Implicit Homogenization Scheme

T. Asada1*, N. Ohno2, 1Department of Computational Science and Engineering, Nagoya University, Japan; 2Department of Mechanical Science and Engineering, Nagoya University, Nagoya, Japan, Email: asada@mml.mech.nagoya-u.ac.jp

H-10: 12:00-12:20 Impact Buckling of FGM Truncated Conical Shells with Geometric Imperfection Jing-Hua Zhang*, Shi-Rong Li, Department of Engineering Mechanics, Lanzhou University of Technology Lanzhou, Lanzhou, Gansu 730050, China, Email: zjhhrb@163.com

Session q3: Composite and cellular materials (3) June 4 (wed), 13:30-15:30, Room 6 Co-Chairs: J. L. Yu, University of Science and Technology of China X.D. Wang, University of Alberta, Canada H-25: invited talk 13:30-13:55 An Experimental Study on the Quasi-Static and Dynamic Behavior of Aluminum Foams under Multi-Axial Compression

J.L. Yu*, E.H. Wang, J.R. Li, CAS Key Laboratory of Mechanical Behavior and Design of Materials, University of Science and Technology of China, Hefei, Anhui 230026, China, Email: jlyu@ustc.edu.cn

H-27: 13:55-14:15 Compressive Properties and Fracture Features of Syntactic Foams B. Zou1, Z.X. Lu1*, Z. Zhang1, C. Liu1, H.Y. Li2, 1Institute of Solid Mechanics, Beijing University of Aeronautics and Astronautics, Beijing 100083, China; 2Beijing Institute of Aeronautical Materials, Beijing 100095, China, Email: luzixing@buaa.edu.cn

H-34: 14:15-14:35 The Dynamic and Static Cushioning Behavior of the Spruces jun-lin Tao1*, ping Jiang2, 1Dpartment of Divil Engneering and Architecture, Southwest University of science and Technology, Mianyang, Sichuan 621010, China, Email: junlintao@126.com

H-48:14:35-14:55 Dynamic Interaction between Inhomogeneities in Advanced Composite Materials X.D. Wang*, Department of Mechanical Engineering University of Alberta, Alberta, Canada T6G 3G8, Email: xiaodong.wang@ualberta.ca

H-11: 14:55-15:15 Lithium and manganese oxides from Electropositive Nitrates X.H. Xie*, H.S. Zhou, K.L. Hu, W. Luo, Anhui University of Science and Technology, Huainan, Anhui 232001, China, Email: xxh1963@163.com

Comprehensive presentation HC-1: 15:15-15:19 H-35 A numerical investigation of the constitutive behavior of functionally graded materials at high heating-rate

H.W. Zheng*, X.H. Peng, FML, Department of Engineering Mechanics, Chongqing University, Chongqing 400044, China, Email: weiwei11001@yahoo.com.cn

HC-2: 15:19-15:23: H-38 Multi-scale Viscoelastic Analysis of 3D Woven Composites C.W. Zhou*, J.Tian*, College of aerospace engineering, Nanjing University of Aeronautics and

Astronautics, Nanjing, 210016, China, Email: zcw@nuaa.edu.cn 15:23-15:30: Discussion q3: What are promising future applications for and developments in cellular and composite materials?

Session q4: Composite and cellular materials (4) June 4 (wed), 15:50-18:00, Room 6 Co-Chairs: Yoshihiro Tomita, Kobe University, Japan F. L. Shang, Xi’an Jiao Tong University H-50: Keynote Talk 15:50-16:20 Deformation Behavior of Carbon-Black Filled Rubber under Straining

Yoshihiro Tomita1*, Masato Naito2, Masaki Kondou1, 1Graduate School of Engineering, Kobe University, Nada, Kobe, Japan; 2SRI&D Ltd., Chuo, Kobe, Japan, Email: tomita@mech.kobe-u.ac.jp

H-37: 16:20-16:40 Study on the intrinsic mechanism of the macro mechanical characteristic for Concrete Material

Q. Zhang1*, X.Z. Xia2, Z. Li, 1Department of Engineering Mechanics, Hohai University, Nanjing, 210098, China; 2Institute of construct, Guangdong University of Technology, Guangzhou, 510006, China & Department of Engineering Mechanics, Hohai University, Nanjing, 210098, China, Email: xiaxiaozhou@163.com

H-42: 16:40-17:00 Influence of Particle-Size Distribution on Effective Properties of Nanocomposites Z.P. Huang1*, J. Wang1, Z.Q. Wang2 and Y.P. Zhao2, 1LTCS and Department of Mechanics and Aerospace Engineering, College of Engineering, Peking University, Beijing 100871, China; 2State Key

Laboratory of Nonlinear Mechanics, Institute of Mechanics, Chinese Academy of Sciences, Beijing 100080, China, Email: huangzp@pku.edu.cn

H-43: 17:00-17:20 Design Optimization of Cross-Section of Crashworthy Beam and Analysis of Energy Absorption under Impacting Load

Zonghua Zhang, Shutian Liu*, State Key Laboratory of Structural Analysis for Industrial Equipment, Department of Engineering Mechanics, Dalian University of Technology, Dalian 116023, China, Email: stliu@dlut.edu.cn

H-54: 17:20-17:40 Experimentation, Modeling and Characterization of a Three-Dimensional Woven Glass Fiber Composite

F. Alavi1*, D. Karimi2, A. Ashrafi3,1, 2Mechanical Engineering , Members of Young Researchers Club, Islamic Azad University, Malek St., Shariati, Tehran, Iran, Email: f.s.alavi@gmail.com

H-78: 17:40-18:00 Composite oxides from emulsion explosives Xinghua Xie*, Shilong Yan, Wei Lou, H.S. Zhou, School of Chemical Engineering, School of Medicines,

Anhui University of Science and Technology, Huainan, Anhui 232001, China, Email: xxh1963@163.com

Session q5: Composite and cellular materials (5) June 5 (Thursday), 8:00-10:00, Room 6 Co-Chairs: W. Q. Chen, Zhejiang University T. Kruml, Academy of Sciences of the Czech Republic H-49: 8:00-8:20 Buckling Behavior of Delaminated Face-sheets in Sandwich Panels with Foam Cores under Dynamic Indentation

H. Zhang*, X.Q. Huang, L.Q. Tang, College of Traffic and Communications, South China University of Technology, Guangzhou 510640, China, Email: emhzhang@scut.edu.cn

H-74: 8:20-8:40 Study of the mechanical Behaviour of Composite Material with Short Fibers by Bucking Analysis

A. Djebbar*, M. Djelil, Laboratory of Mechanics Structure, Energy (LMSE) Mechanical Department Engineering University Mouloud Mammeri Tizi-Ouzou B.PN°17 Tizi-Ouzou Algeria, Email: Chafik_dj@yahoo.fr

H-62: 8:40-9:00 Numerical Simulation of the irradiation-mechanical behaviors of dispersion nuclear fuel elements

Shurong Ding*, Yongzhong Huo*, Xin Jiang, Yuanfu Wan, Department of Mechanics and Engineering Science, Fudan University, shanghai 200433, China, Email: dsr1971@163.com, yzhuo@fudan.edu.cn

HC-6: 9:00-9:20 H-87 Two-dimensional thermoelastical vibration analysis for functionally graded plates Wuxiang Liu, Zheng Zhong*, School of Aerospace Engineering and Applied Mechanics, Tongji

University, Shanghai 200092, China, Email: zhongk@mail.tongji.edu.cn Comprehensive presentation HC-3: 9:20-9:24: H-60 Parameter Study of Long-span Steel/RC Composite Open-web Structures

J.C. Xiao1*, C. Bai12 ,Y. Liu3, K. Ma3, Research Center of Space Structures, Guizhou University, Guiyang, Guizhou 550003, China, Email: ca.jcxiao@gzu.edu.cn

HC-4: 9:24-9:28: H-82 An estimate for equivalent poroelastic properties of anisotropic cylinder composite materials with multi-hole and multi-phase Y.H. Cui*, X. Wang, Y.H. Yang, Department of Mechanics, Tianjin University, Tianjin, China, 300072,

Email: yhcui@tju.edu.cn

HC-5: 9:28-9:32: H-86 Asymmetric Bending of Bi-directional Functionally Graded Circular Plates Guojun Nie*, Zheng Zhong, School of Aerospace Engineering and Applied Mechanics, Tongji

University, Shanghai 200092, China, Email: ngj@mail.tongji.edu.cn 9:32-10:00 Discussion q6: What are promising future applications for and developments in cellular and composite materials?

Session q6: Composite and cellular materials (6) June 5 (Thursday), 10:20-12:20, Room 6 Co-Chairs: Y. Shindo, Tohoku University, Japan Daining Fang, Tsinghua University H-58: Invited Talk 10:20-10:45 Uniaxial Time-dependent Ratchetting of SiCP/6061Al Composites: Experiments and Numerical Simulations

G.Z. Kang*, S.J. Guo, X.J. Shao, Y.J. Liu, Department of Applied Mechanics and Engineering,Southwest Jiaotong University, Chengdu, Sichuan 610031, China, Email: guozhengkang@yahoo.com.cn

H-65: 10:45-11:05 Equivalent Shear Strength of Honeycomb Cores S.D. Pan *, L.Z. Wu, J.C. Feng, Center for Composite Materials, Harbin Institute of Technology, Harbin 150080, China, Email: sd6419866@sina.com

H-44: 11:05-11:35 Mechanics of Metallic Foams: a Fractal Approach H.W. Song*, Q.J. He, Institute of Mechanics, Chinese Academy of Sciences, Beijing, 100080, China;

Email: songhw@imech.ac.cn H-51: 11:35-11:55 In-plane dynamic crushing of 2D cellular structures with the edges deleted Yanze Song, Zhiqiang Li, Longmao Zhao, Institute of Applied Mechanics and Biomedical Engineering,

Taiyuan University of Technology, Taiyuan, Shanxi, China, Email: tyut_syz@163.com H-55: 11:55-12:05 An Experimental and Numerical Investigation of Cushioning Mechanism of Mould Pulp Structure Jinlong Chena*, Mingguo Wangb, Hemin Wangc, Xinhua Jid and Hongwei Jie, a,b,c,dDept. of Mechanics,

Tianjin University, Tianjin 300072, P. R. CHINA; eDept. Of Packaging Engineering, Tianjin Commerce University, Tianjin 300134, P. R. CHINA, Email: jlchen66@tju.edu.cn

H-56: 12:05-12:25 Debond propagation in sandwich structure under uniaxial in-plane compression Jinlong Chena*, Qingqing Rongb, Hemin Wangc and Xinhua Jid, Dept. Of Mechanics, Tianjin University,

Tianjin 300072, P. R. CHINA; Email: jlchen66@tju.edu.cn

Session q7: Composite and cellular materials (7) June 6 (Friday), 8:00-10:00, Room 2 Co-Chairs: Y. Shindo, Tohoku University, Japan Fulin Shang, Xi’an Jiao Tong University H-6: 8:00-8:20 Fast numerical algorithm for heat transfer efficiency of prismatic cellular materials

Yongcun Zhang, Shutian Liu*, He Zhu, State Key Laboratory of Structural Analysis for Industrial

Equipment, Dept. of Engineering Mechanics, Dalian University of Technology, Dalian 116024, PR China,

Email: stliu@dlut.edu.cn

H-8: 8:20-8:40 The influence of viscosity on the band gap of 2D phononic crystal

Z.Q. Zhan, P.J. Wei*, Y.P. Zhao, M. Zheng, Department of mathematics and mechanics, School of applied sciences, University of science and technology Beijing, Beijing 100083, Email: weipj@sas.ustb.edu.cn

H-3: 8:40-9:00 Numerical simulation of Stress Transfer in concrete beams bonded with FRP sheets T. Xu1*, C.A. Tang2, Y.B. Zhang2, Z.Z. Liang2, 1Center for Material Failure Modeling Research, Dalian University, Dalian, Liaoning 116622, China; 2College of Civil & Hydraulic Engineering, Dalian University of Technology, Dalian, Liaoning 116024, China, Email: neuxutao@126.com

H-13: 9:00-9:20 Effects of High Order Deformations on Elastic Modulus and Collapse of Planar Lattice Materials

Y.H. Zhang, D.N. Fang*, Department of Engineering Mechanics, Tsinghua University, Email: fangdn@mail.tsinghua.edu.cn

H-79: 9:20-9:40 Detonation of Unconventional Explosives Xinghua Xie*, Huisheng Zhou, Shilong Yan, School of Chemical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China, Email: xxh1963@163.com

9:40-10:00 Discussion: Discussion for Poster H-41: 16:30-16:45 Phase Change Phononic Crystal

Z.Y. Xu*, X. B. Zang, School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai, 200092, China, Email: xu_zy@mail.tongji.edu.cn

H-45: Creep-Buckling of General Hexagonal Honeycombs under Biaxial Compression H. Xiang1*, S.Q. Huang3, Y.M. Fu2, 1College of Food Science, South China Agricultural University, Guangzhou 510642, China; 2College of Mechanics and Aerospace, Hunan University, Changsha, Hunan, 410082, China; 3Department of Mechanics & Civil Engineering, Jinan University, Guangzhou, Guangdong, 510632, China, Email: xianghong@scau.edu.cn

H-52: Free vibration of piezoelectric laminates via a hybrid analysis Y.Y. Zhou1, W.Q. Chen2*, Y.Q. Guo2, 1School of Aeronautics and Astronautics, Zhejiang University, Hangzhou 310027, China; 2Department of Civil Engineering, Zhejiang University, Hangzhou 310027, China, Email: chenwq@zju.edu.cn

H-63: Study on Engineering Characteristics of Foamed Glass System of Heat Preservation and Thermal Insulation of Building Wall

Z.R. Niu1, Y.H. Jiang2, Y.Y. Luo3, The College of Civil Engineering and Architecture, Jiaxing University, Zhejiang, Jiaxing, 314001, P. R. China, Email: niuzr@126.com

H-64: Experimental study on the Energy Absorption of an Al-Cu Alloy Foam under static compressive loading

Yu Fu1*, Ping Jiang2, Ruo-ze Xie3, Jun-lin Tao4, 1Department of Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China; 2Dept. of Mechanical Engineering, Southwest Petroleum University, Chengdu, Sichuan 610500, China; 3Institute of Structural Mechanics, China Academy of Engineering Physics, Mianyang, Sichuan 621900, China; 4Dept. of Civil Engineering and Architecture, Southwest University of Science and Technology, Mianyang, Sichuan 621010, China, Email: fuyuyl@yahoo.com.cn

H-66: Permissible Prestress Value in Technology of RC Beams Strengthened with Prestressed CFL X.Y. Guo*, P.Y. Huang, College of Traffic and Communications, South China University of Technology, Guangzhou, Guangdong 510640, China, Email: xyguo@scut.edu.cn

H-67: Robust design of laminated composite plates for comparing last-ply failure and first-ply failure

Xiangyang Wang, Guanghui Zhao, School of Transportation, Wuhan University of Technology, Wuhan 430063, China, Email: wangxy2003@163.com

H-83: Closed-form solutions for the mode Ⅲ crack tip plastic zone Xin Gao*, Xingwu Kang, Hangong Wang, 501 Section of Xi’an an High-Tech Institute, Xi’an 710025, China, Email: gx_10164@yahoo.com.cn

H-85: Steady thermal stresses in ceramic-metal composite EFBF plate with an interlayer of FGM Yangjian Xu1*, Chunping Xiao1, Daihui Tu2, J.H. Shan1, 1School of Civil Engineering; 2School of Science, Hebei University of Engineering, Handan 056038,China, Email: xuyangjian@sohu.com

Q-7: The Symplectic Method for Plane Problem of Functionally Graded Materials L. Zhao, W.Q. Chen*, Department of Civil Engineering, Zhejiang University, Hangzhou, Zhejiang 310027, China, Email: chenwq@zju.edu.cn

Session q8: Composite and cellular materials (8) June 6 (Friday), 10:20-12:20, Room 2 Co-Chairs: Jun-Zhi Cui, Chinese Academy of Science Hosur Mahesh, Tuskegee, USA H-28: 10:20-10:40 Construction of Hereditary Constitutive Equations of Composite Laminates

A.M. Dumansky1*, L.P. Tairova2, 1Laboratory Methods of Certifying Fatigue Tests of Materials,Mechanical Engineering Research Institute of Russian Academy of Sciences, Maly Kharitonievsky, 4 Moscow, 101990, Russia, Email: alduman@rambler.ru

H-80: 10:40-11:00 Microcosmic Difference between Detonation Soot and Deflagration Products Xing-hua Xie, Hui-Sheng Zhou*, Shi-long Yan, Hui Liu, School of Medicines, School of Chemical Engineering, Anhui University of Science and Technology, Huainan, Anhui 232001, China, Email: xiejunzhs@163.com

H-81: 11:00-11:20 Detonation Mechanics Calculation for Nanometer Spinel Lithium Manganate Xinghua Xie*, Huisheng Zhou, J.Y. Zhang, H. Zhang, School of Chemical Engineering, Anhui University

of Science and Technology, Huainan, Anhui 232001, China, Email: xxh1963@163.com H-24: 11:20-11:40 Energy of homogeneous spatial structure under compression Zhenlun Song1*, Steve Nutt2, 1Ningbo Institute of Materials Technology and Engineering, Chinese

Academy of Sciences, 181Canghai Road, Ningbo 315040, China; 2Department of Materials Science, University of Southern California, 3651 Watt Way, VHE-602, Los Angeles, CA90089-0241, U.S.A; Email: songzhenlun@nimte.ac.cn

H-84: 12:40-12:00 An Approximate Method to Analyze Combined Structures with Porous Foam Blocks

Y.H. Yin*, Y.D. Liu, P.A. Shi, Institute of Structural Mechanics, China Academy of Engineering Physics, Mianyang, Sichuan, 621900, China, Email: yin-yihui@sohu.com

12:00- 12:20 Discussion: Posters Poster presentation of Session q H-4: The Study of Influence of Micro-mechanical Properties on Cellular Deformation of Material with Sweat-Gland Structures

Ping Lu*, Zuomin Liu, Y.J. Wang, Tribological Institute of Wuhan University of Technology, Wuhan, Hubei 430070, China, Email: luping@whut.edu.cn

H-9: Recent Trends IN LOW GRADE WOOD polymer composites Modification TecHNIQUES AND THEIR MECHANICAL AND THERMAL CHARACTERIZTION Manoj Kumar1, A. Srivastav1, 2, P.L. Sah3 and M.G.H. Jaidi3, Department of Mechanical Engineering,

College of Engineering & Technology, IFTM, Moradabad, Uttar Pradesh, India, Email: sri_anupam2003@yahoo.co.in

H-18: A Constitutive Model for Pre-impregnated Woven Fabric Materials Wei. Wang1*, Xing-Wen Du2, Center for Composite Materials, Harbin Institute of Technology, Harbin, 150001, China, Email: mimal@126.com

H-20: Transient Heat Conduction in Functionally Graded Materials Due to Local Thermal Shock Feng-Xi Zhou1*, Shi-Rong Li2, Yuan-Ming Lai3, 1School of civil engineering, Lanzhou university of technology, Lanzhou, Gansu 730050, China & State Key Laboratory of Frozen Soil Engineering, Cold and Arid Regions Environmental and Engineering Research Institute, Chinese Academy of Sciences; Lanzhou, Gansu 730000, China; 2School of Sciences, Lanzhou university of technology, Lanzhou, Gansu 730050, China; 3State Key Laboratory of Frozen Soil Engineering, Cold and Arid Regions Environmental and Engineering Research Institute, Chinese Academy of Sciences, Lanzhou, Gansu 730000, China, Email: zfx620@lut.cn

H-26: A Numerical Study of the Elastic Properties of Low Density Open-cell Foams with Tetrakaidecahedral cells

Z.G. Fan*1, 2, C. Chen1, T.J. Lu1, 1MOE Key Laboratory of Strength and Vibration, School of Aerospace, Xi'an Jiao Tong University, Xi'an, Shaanxi 710049, China; 2Southwest Institute of Structural Mechanics, Mianyang, Sichuan 621900, China, Email: xjtufzhg@stu.xjtu.edu.cn

H-31: Effects of Defects on Mechanical Behavior of Lattice Materials X.D. Cui*, D.N. Fang, Department of Engineering Mechanics, Tsinghua University, Beijing, 100084, China, Email: fangdn@mail.tsinghua.edu.cn

H-36: Preliminary Investigation on the Dynamic Compression Properties of Three-Dimensional(3D) Carbon Fibre Composites

Hongwei Yu, Junlin Tao*, Yong Yao, Dpartment of Divil Engneering and Architecture, Southwest University of science and Technology, Mianyang, Sichuan 621010, China, Email: junlintao@126.com

H-39: A Hybrid Stress Finite Element Method for Nonlinear Analysis of Composite Materials C.H. Zhang*, J.L. Zhang, D.D. Wang, Department of Civil Engineering, Xiamen University, Xiamen, Fujian 361005, China, Email: chzhang@xmu.edu.cn

H-40: Numerical Simulation of Composite Projectile Penetrating Target Q.P. Zhang1*, W.Z. Zhong1, Y.G. Lu2, G. Chen1, X.C. Huang1, Institute of Structural Mechanics, China Academy of Engineering Physics, Mianyang, 621900, China, Email: zh_qp516@sina.com

Session r1: Analytical and numerical methods (1) June 5 (Th), 13:30-15:30, Room 6 Co-Chairs: H. Park, Colorado University, USA B.X. Xu, Peking University P-7: 13:30-13:50 The arithmetic mean property of rotational symmetrical inclusions

B.X. Xu*, M.Z. Wang, LTCS and Department of Mechanics and aerospace engineering, College of Engineering, Peking University, Beijing 100871, P. R. China; Email: xbx@pku.edu.cn

F-28: 13:50-14:10 Non-Fourier Effects in Non-Homogeneous Inner Structure Materials M. Hanief1, G.A. Harmain2, Department of Mechanical Engineering, National Institute of Technology, Srinagar Kashmir 190006, India, Email: hanief123@rediffmail.com; gharmain@yahoo.ca

P-2: 14:10-14:30 Study on Characteristics of Vibration of Cantilever Plates with Variable Thickness and with a Hole defect

Xiuqin Ma*, Takeshi Sakiyama, Mei Huang, Hiroshi Matsuda, Chihiro Morita, Hebei University of Technology, Tianjin, 300130, P. R. China; Email: xiuqin_ma@hotmail.com

P-10: 14:30-14:50 Transport of Glassy Matter in Cylindrical Rough Nanopores Kwang-Hua W. Chu, School of Physics and Information Engineering, Hebei Normal University, Email:zhugh49@mail.hebtu.edu.cn, khwchu@126.com

Comprehensive presentation PC-7: 14:50-14:54: P-52 A Study of V-belt Drive Mechanics of Sliding Friction with Two Symmetric Pulleys

D.Y. Zheng*, Q.X. Meng, L.Q. Wang, Z.L. Zhang, Key Laboratory of Subsea Equipment, Mechatronical College, Harbin Engineering University, Harbin, Heilongjiang 150001, China, Email: zhengdy@hrbcu.edu.cn

P-22: 14:58-15:02 A mesoscopic characterization of creep in thin metal films Ya-Xiong Zheng1, Li-Sha Niu1*, Hui-Ji Shi1, Department of Engineering Mechanics School of Aerospace, Tsinghua University, Beijing 100084, P.R. China; Email: niulsh@mail.tsinghua.edu.cn

15:02- 15:30 Discussion

Session r2: Analytical and numerical methods (2) June 5 (Th), 15:50-18:00, Room 6 Co-Chairs: M. A. Zikry, North Carrolina University, USA M. Badaoui, Université Paris-Est Marne-la-Vallée, France P-44: invited talk: 15:50-16:15 Modeling of FGM-TFBARs with the Method of Reverberation-Ray Matrix

W.Q. Chen*, Y.Q. Guo, Key Laboratory of Soft Soils and Geoenvironmental Engineering, Ministry of Education Department of Civil Engineering, Zhejiang University, Hangzhou 310027, China; Email: chenwq@zju.edu.cn

P-14: 16:15-16:35 Soil Height Randomness Influence on the Seismic Response M. Badaoui1*, M.K. Berrah 2, A. Mebarki 3, Laboratoire de Mécanique (LAM), Université Paris-Est Marne-la-Vallée, Cité Descartes 5, bd Descartes Champs sur Marne 77454 Marne-la-Vallée Cedex 2,Email: Ahmed.Mebarki@univ-mlv.fr

P-19: 16: 35-16:55 3D analysis of functionally graded plates with one pair of opposite edges simply supported using hybird differential quadrature method

Chun Zhang1*, Zheng Zhong2, 1School of Civil Engineering and Architecture, Nanchang University, Nanchang, 330031, P. R. China; 2School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai, 200092, P. R. China, Email: jxjjzc@163.com

B-21: 16:55-17:15 A Finite Element Model of the Heterogeneous Deformation of Austenite and Ferrite in a Duplex Stainless Steel under Hot Plane Strain Compression

By: Y.J. Lan and C. Pinna, Institute for Microstructural and Mechanical Process Engineering, The University of Sheffield (IMMPETUS), Mappin street, Sheffield, S1 3JD, UK. Department of Mechanical Engineering, The University of Sheffield, Mappin street, Sheffield, S1 3JD, UK, Email: Y.Lan@sheffield.ac.uk

Comprehensive presentation PC-1: 17:15-17:19: P-1 The Interaction of Circular Inclusion and Double Linear Cracks

HongLiang Li1*, H. Li, Department of Engineering Mechanics, Harbin Engineering University, Harbin, Heilongjiang 150001, Harbin, Email: leehl@sina.com

PC-2: 17:19-17:23: P-5 An Actuator laser of Optical Disk Drive High-Frequency Electromagnetic Vibrations Characteristic Analysis

Lanying wu1, H.G. Ban2, 1University of Science And Technology Beijing, China, 2North China Institute of Computing Technology, China; Email: wu1122334@126.com

PC-3: 17:23-17:27: P-39 A Fuzzy Variable Evaluation Model of Machinability for Processible Ceramic Materials

M. Li*, S.Y. Chen, School of Civil and Hydraulic Engineering, Dalian University of Technology, Dalian 116024, China, Email: Limin7565@yahoo.com.cn

PC-4: 17:27-17:31: P-47 Study on Long Span Bridge with Externally Bonded Prestressed CFRP Sheets

Xiangyang Wang*, Shaobo Ji, P. Zhong, School of Transportation, Wuhan University of Technology, Wuhan 430063, China, Email: wangxy2003@163.com

PC-5:17:31-17:35: P-36 Property of on-off flexible seal composed of rubber and polymer in snubbing service

Guangzheng Jia*, Jinyou Wang, Haitao Sun, Yulian Chang, School of Mechanical Science and Engineering, Daqing Petroleum Institute, Daqing 163318, China, Email: jiaguangzheng@126.com

PC-6: 17:35-17:39: P-51 Three-dimensional Numerical Modeling for Structural Planes Around Rock Underground Engineering by GeoSMA-3D Method S.H. Wang*, Y.H. Fu, Y.B. Zhang, J.N. Hou, B. Yang, S.L. Zhang, School of Resource and Civil

Engineering, Northeastern University, Shenyang, Liaoning 110004, China, Email: shwang@mail.neu.edu.cn

17:39-18:00 Discussion

Session r3: Analytical and numerical methods (3) June 6 (Fri), 8:00-10:00, Room 6 Co-Chairs: Min Zhou, Georgia Institute of Technology, USA J.D. Yau, National Taiwan Ocean University P-37: 8:00-8:20 Buckling Analysis of Parabolic Double-Walled Carbon Nanotubes Under Uniform Distributed Loads

J.D. Yau1*, S.R. Kuo2, 1Dept. of Architecture, Tamkang University, Taipei, Taiwan; 2Dept. of Harbor and River Engineering, National Taiwan Ocean University, Keelung, Taiwan, Email: jdyau@mail.tku.edu.tw

B-11: 8:20-8:40 Analysis of Micro-indentation problem of a soft film on a hard substrate D.K. Yi and T.C. Wang*, LNM, Institute of Mechanics, CAS, Beijing 10086, China; Email: tcwang@imech.ac.cn

P-48: 8:40-9:00 effect of the Heat Source Model on Thermal Process during Laser Welding of the Different Material

Yixia Yan*, Zhiming Hao, Jun Mo, Institute of Structural Mechanics, CAEP, 621900, Email: pu-yf@163.com

P-13: 9:00-9:20 Dynamics and Vibration Control of a Self-sensing and Actuating Rotating Cantilever Plate with ACLD Treatments L.J. Liu, Z.Y. Zhang*, H.X. Hua, X.W. Yin, State Key Laboratory of Mechanical System and Vibration,

Shanghai Jiao Tong University, Shanghai 200240, P. R. China; Email: chychang@sjtu.edu.cn Comprehensive Presentation PC-10: 9: 20-9:24: P-25 Coupling analysis of nonlinear and nonhomogeneous problems with finite element method

L. Guo*, X.W. Gao, Department of Engineering Mechanics, Southeast University, Nanjing, 210096 China, Email: lguo@seu.edu.cn

PC-11: 9:24-9:28: P-54 A Fuzzy Interface Method and Its Application in Complex Fluid Field K.T. Wu*, L.M. Mu, J.G. Ning, Key Laboratory of Numerical Simulation of Sichuan Province, Department of Mathematics, Neijiang Teacher's College, Neijiang, Sichuan 641112,China, Email: ktengwu@njtc.edu.cn

Poster presentation r: P-35: Processing Algorithms about Phase Unwrapping in Phase Shifting Interferometer

Y.G. Li, Q.H. SONG, College of Engineering Science and & Technology of Shanghai Fisheries University, Shanghai, 200090, China, Email: yg-li@shfu.edu.cn

P-38: Analysis for Macro-response of Functionally Graded Plates with Complex Shape by Material Component Micro-constitution

Hongmei Cheng1*, Zhiyuan Cao2, 1College of Sciences, China University of Mining and Technology, Xuzhou 221008; 2School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, Email: hm2963_cn@163.com

P-46: Stress Singularity Factor of Doubly Periodic Non-Equilong Rigid Line Inclusions Under Antiplane Shear

Y.L. Xu*, Y.Z. Shen, Department of Engineering Mechanics, Yanshan University, Qinghuangdao, Hebei 066004, China, Email: xuyaoling@eyou.com

P-53: Unsteady Temperature Fields in Non—Homogeneous Materials Yao Dai1*, Qi Sun1，Chang-qing Sun1, Wei Tan2, 1Department of Mechanical Department, Armored Force Engineering College, Beijing, China 100072; 2Department of Materials and Engineering,

P-31: First-principles predictions of osmium boride, carbide and nitride Yongcheng Liang1*, Bin Zhang2 , Jianzhi Zhao3, Q. H. Song1, S. F. Jin1, 1College of Engineering Science and Technology, Shanghai Fisheries University, Shanghai 200090, China; 2College of Aerospace Engineering, Nanjing University of Aeronautics and Astronautics, Nanjing 210016, China; 3Beijing National Laboratory for Condensed Matter Physics, and Institute of Physics, Chinese Academy of Science, Beijing 100080, China, Email: ycliang@shfu.edu.cn Armored Force Engineering College, Email: yao_dai@yahoo.com.cn; dai_yao@sina.com

9:28-10:00 Discussion

Session r4: Analytical and numerical methods (4)

June 6 (Fri), 10:20-12:20, Room 6 Co-Chairs: Z. P. Huang, Peking University Ke-Shen Cheong, Quest Reliability Ltd., Structural Integrity Group, New Zealand P-45: Invited Talk 10:20-10:45 Analysis of Functionally Graded Plates with Arbitrary Distributed Elastic Modulus

Zheng Zhong1*, E.T. Shang2, 1School of Aerospace Engineering and Applied Mechanics,Tongji University, Shanghai 200092, China; 2Shanghai Supercomputer Center, Shanghai 201203, China, Email: zhongk@mail.tongji.edu.cn

P-30: 10:45-11:05 Dispersion of surface acoustic wave for a functionally graded coating on curved surfaces

Y.D. Pan1*, X.H. Song1, Z. Zhong2, B. Audoin3, 1Institute of Acoustics, Tongji University, Shanghai 200092, China, Email: ypan@mail.tongji.edu.cn

P-50:11:05-11:25 On the optimal selection of measured data in time domain for structural identification

L.T. Zhang*, Z.X. Li, Q.G. Fei, College of Civil Engineering, Southeast University, Nanjing 210096, China, Email: zhanglitao@seu.edu.cn

P-43:11:25-11:45 Wave Propagation in Functionally Graded Piezoelectric Thin-Films Y.Q. Guo, W.Q. Chen*, Key Laboratory of Soft Soils and Geoenvironmental Engineering, Ministry of Education; Department of Civil Engineering, Zhejiang University, Hangzhou 310027, P. R. China, Email: chenwq@zju.edu.cn

Comprehensive presentation PC-8:11:45-11:49: P-49 Vibration Fatigue Life Prediction of Turbine Disk Based on BP Neural Networks

Z.X. He1*, S.W. Song2, F. Li2, X.T. Luan2, Q. Sun1, 1College of Aeronautics, Northwestern Polytechnical University, Xi’an, Shaanxi 710072, China; 2Xi’an Aerospace Propulsion Institute, Shaanxi 710100, China; Email: hezxlt@pub.xaonline.com

PC-9: 11: 49-11:53: P-23 Elasticity Solutions for a Uniformly Loaded Circular Plateof Functionally Graded Materials

H.J. Ding1*, B. Yang1, W.Q. Chen1, Department of Civil Engineering, Zhejiang University, Hangzhou 310027, China, Email: bo.young@163.com

11:53-12:20: Discussion Poster presentation of Session r P-3: Theoretical analysis on the influence of understructure excavation on the fault slipping

Z.T. Chen1*, W. Wang2, L.F. Zhang3, 1Department of Fundamental Science,Shazhou Institute of Technology, Zhangjiagang, Jiangsu 215600,China & College of Civil Engineering, Hohai University, Nanjing, Jiangsu 210098, China; 2College of Civil Engineering, Hohai University, Nanjing, Jiangsu 210098, China; 3Natural Gas Sub-company of Daqing Oilfield Corp. Ltd., Daqing, Heilongjiang 163511, China; Email: chenzaitie@yahoo.com.cn

P-6: Electroelastic interaction between a piezoelectric screw dislocation and a confocal crack in elliptical inhomogeneity

Y.W. Liu*, H.P. Song, Q.H. Fang, College of Mechanics and Aerospace, Hunan University, Changsha, Hunan410082, China, Email: liuyouw8294@sina.com

P-8: Application Research of Modified Project Material in Pure Water Hydraulic Element R.B. Yuan1, Z.Y. Wu1, J. Luo1,2 and E.G. Zhao1, 1Institute of Fluid Control Engineering, Kunming University of Science and Technology, Kunming, Yunnan 650093, P.R.China; 2School of Mechatronics Engineering, Harbin Institute of Technology, Harbin, Heilongjiang 150001,P.R. China; Email: kmust_yrb@hotmail.com

P-20: A Refined Theory of Infinite Sandwich Plate B.S. Zhao1*, Y. Gao2, X. Yu1, 1School of Mechanical Engineering, University of Science and Technology Liaoning, Liaoning, Anshan 114051, P. R. China; 2College of Science, China Agricultural University, Beijing 100083, P. R. China; Email: zhaobaos@pku.org.cn

P-29: A New Theory and a New Method for Analysis of Piezoelectric Laminated Composite Plates and Shells

Rong Qin, Yongbing Zhang*, Shuangbei Li, Department of Civil and Architecture Engineering, Guangxi University, 100 Daxue Road, Nanning, Guangxi, 530004, China, Email: zhangbing111@sina.com

Session r5: Analytical and numerical methods (5) June 6 (Fri), 10:20-12:20, Room 3 Co-Chairs: D. Bammann, Mississippi State University, USA Yueguang Wei, Institute of Mechanics, Chenese Academy of Science Q-4: 10:20-10:40 On the Interface Modeling for Heterogeneous Materials using Meshfree Method

Dongdong Wang*, Yue Sun, Department of Civil Engineering, Xiamen University, Xiamen, Fujian 361005, China; Email: ddwang@xmu.edu.cn

P-41: 10:40-11:00 Establishing and Simulating Automobile Hysteretic Non-linear Dynamics Model Mingxia Fang*, Q. Feng, School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai, 200092, Email: mingxiafang@mail.tongji.edu.cn

P-9: 11:00-11:20 Analytical Solution for the Response of a ferroelastic thin film to infrared radiation Yaochen Li1*, Changjin Yang1, J.L. Sun2, 1School of Aerospace Engineering and Applied Mechanics, Tongji University, Shanghai 200092, China; 2Shanghai Institute of Technical Physics, Chinese Academy of Sciences, Shanghai 200083, P.R. China; Email: yaochenli@mail.tongji.edu.cn

Comprehensive presentation Q-10: 11:20-11:24 A symplectic scheme on numerical study for Gross-Pitaevskii equation

YiMin Tian1*, MengZhao Qin2, YongMing Zhang1, 1Mathematics and Physics Division, Beijing Institute of Graphic Communication, Beijing 102600, China; 2Institute of Computational Mathematics and Scientific/Engineering Computing Academy of Mathematicsand Systems Sciences Academic Sinica, Email: tym66105@yahoo.com.cn

Q-11: 11:24- 11:28 The Temperature Distribution of Heterogeneous Material for Thermoelectric Devices in Sintering by SPS Method

Y.H. Cai1, D.G. Zhao1, W. Jiang1*, L.D. Chen1, P.C. Zhai2, 1State key Laboratory of High Performance Ceramics and Superfine Microstructure,Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China; 2Department of Engineering Structure and Mechanics, Wuhan University of Technology, Wuhan 430070, China; Email: wanjiang@mail.sic.ac.cn

Q-21: 11:28-11:32 Thermoelastic Buckling Behavior of Functionally Graded Circular/Annular Plates Based on First Order Shear Deformation Plate Theory

L.S. Ma*, J.Q. Fu, F. Yang, School of Sciences, Lanzhou University of Technology, Lanzhou 730050,

China; Email: lsma@lut.cn 11:32-12:20 Discussions: Taking comprehensive presentations and following Posters for discussion Posters for Session r: B-17: 3D finite element analysis on SiCp/Al composite

Liang Qin1*, Keshi Zhang1,2, XiaoLiang Geng1, YunQiang Guo1, 1Northwestern Polytechnical Universtiy, Xi’an, Shaanxi 710072, China; 2Guangxi University,nan’ning,guangxi,530004,China, Email: qinliang@mail.nwpu.edu.cn

B-23: HTPB Propellant Debonding Damage Research J.L. Zhao, The second artillery engineering institute, Shanxi, Xi’an 710025, China, Email: w03243491@sina.com

G-4: 8:45-9:05 Effect of Micro-voids on Phase Transformation in a NiTi-alloy J.S. Olsen*, Z.L. Zhang, C. van der Eijk, Department of Structural Engineering, Norwegian University of Science and Technology (NTNU),N-7491 Trondheim, Norway, Email: Jim.Stian.Olsen@ntnu.no

ICHMM2008 Academic Program Session a1: Special and unique...

Documents

Transcript of ICHMM2008 Academic Program Session a1: Special and unique...

A1. ALGEMEEN MANAGEMENT - mobyus.be · - Managementvaardigheden - Robert E. Quinn - Uitgeverij Academic Service Extra cursusmateriaal (o.a. slides) is elektronisch beschikbaar op

ANC 3D Presentation 13...A3 – Acheson Academic/Admin 39 3 24,000 Replacement A2 – W Street Central Academic/Admin 53 3 20,000 A1 – W/Foxhall Hillside Academic/Admin 57 3 35,000

Academic Regulations 2019/2020 - University of the West of ... · UWE Bristol Academic Regulations 2019/2020 3 Part A: The academic regulatory framework A1. The regulatory framework

Introduction to A1 Academia. The open source alternative to Higher Education Academic Management

identity A case for research on digital Sam King...Unique industry experience for an academic • Responsible for real products • Found many opportunities to apply academic knowledge

Einstufungstest Deutsch A1 - EB Zürich · Deutsch A1 . German A1 . Allemand A1 . Alemán A1 . Deutschtest A1, Selbsteinstufungstest – ... Deutschtest A1, Selbsteinstufungstest

IA-01 INSTALACIÓN DE ALUMBRADO - Torrelodones · a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a1 a2 a3 a4 a5 a6 interceptar red existente arqueta existente. conexiÓn con linea

Scheduled Academic Year One size fits all Borrower Based Academic Year Unique to the borrower.

2021-2022 Academic Year First Day Presentation A1 Level

4.1 UNIQUE CARBON Sample Academic Group

Creative Thinking of Low Academic Student Undergoing ...e-iji.net/dosyalar/iji_2017_2_16.pdf · (Adapted from Borg & Gall, 1983) Note : M1 = SSCS + MS learning model A1 = high academic

Community Meeting 4 FINAL 070909 - neighborhood.gwu.edu...A3/Academic: 25,000 GFA 3 Stories A2/Academic:A2/Academic: 25,000 GFA 2-4 Stories A1/Academic: 45,000 GFA 3-4 Stories W St.

ACADEMIC GUIDE - wi01932907.schoolwires.net recognize the unique talents and interests of our student population and ... ACADEMIC GUIDE TABLE OF ... (Based on 2015-2016 data) Daily

USER MANUAL SR05-A1 - hukseflux.comSR05 -A1 manual v1711 6/49 Optionally SR05 has a unique ball levelling mechanism with or without tube mount, for easy installation. Figure 0.1 On

A Unique and Leading Edge Academic Conference …docs.edhec-risk.com/EID-2008-Doc/documents/conference_circuit.pdf · A Unique and Leading Edge Academic Conference Circuit “Where

ENVIRONMENTAL PRODUCT DECLARATION · the product stage, meaning that the modules A1, A2 and A3 are considered as a unique module A1-A3. The construction process stage includes: -

United Theological Seminary Academic Catalog 2018 | 2019 · 3 Academic Calendar 2018/2019 Fall Semester July 1 – December 15, 2018 Fall Intensive A1: July 31-August 4 Fall Intensive

Academic Calendar 2015-16 - CBSE...Academic Calendar 2015-16 Calendar 2015-16 Central Board of Secondary Education What’s unique about the CBSE’s Academic Calendar? It is essentially

Class Code Level Student no Name Surname SFL-01(A1) A1 ... · sfl-01(a1) a1 2010103507 abdallah kuntar sfl-01(a1) a1 2010205529 abdul malek alghazawi sfl-01(a1) a1 2010213529 abdulaziz

Academic Rules and Student Life 2019-2020 · USEK Academic Rules and Student Life 2019-2020 Page 7 of 87 A. Academic Information A1. Credit System A1.1 The Credit The biannual credit