Post on 02-Nov-2018
HTC 270 EG
HTC 650 RX
HTC 420 VS
HTC 800 HDX HTC 800 RX
HTC 500
HTC 950 RX
HTC 650 E Classic
HTC 1500 ixT
HTC 80 iD
HTC 650 HDX
HTC 800 Classic
2,2 kW
11 kW
2,2 kW
15 kW 15 kW
4 kW
15 kW
7,5 kW 11 kW
11 kW
2 x 11 kW
1 x 230 V, 10 A
3 x 400 V, 25 A
3 x 460 V, 16 A
3 x 460 V, 25 A
3 x 400 V, 16 A
3 x 460 V, 32 A 3 x 460 V, 32 A
3 x 460 V, 16 A 3 x 460 V, 25 A
3 x 460 V, 25 A
400 V, 63 A
3 x 400 V, 16 A
3 x 400 V, 32 A
1 x 230 V, 10 A
1 x 115 V, 20 A
3 x 400 V, 32 A 3 x 400 V, 32 A
3 x 400 V, 16 A 3 x 400 V, 25 A
3 x 400 V, 25 A
3 x 230 V, 16 A103 kg
455 kg
94 kg
510 kg 565 kg
147 kg
600 kg
320 kg 365 kg
440 kg
1900 kg
270 mm
650 mm
420 mm
800 mm 800 mm
500 mm
920 mm
650 mm 800 mm
650 mm
1450 mm
7,5 kW
3 x 460 V3 x 400 V
260 kg
700 m³/h
HTC’s grinding machines have unique benefits that makes your everyday life as grinding contractor easier. See below some innovations that make a difference.For more information om about a specific machine model and the features of each machine, please visit; www.htc-floorsystems.com.
Radio controlThe radio control provides a significantly simplified handling of the machine during grinding and transportation. It also makes it possible to grind for a long period of time without a break.
4 head grinder (X model)With a 4 head grinder you get an up to 30% more effective grinding and stripping and obviously a more level floor. In addition, a machine with four grinding heads runs smoother which makes the handling more ergonomic.
Outstanding qualityHTC’s high quality means that HTC as the only company in the industry can offer a 2 year warranty* on the complete machine range.
Flexible and floating grinding coverA grinding cover that follows the floor together with a dust extractor prevents the spread of dust in the floor. HTC’s flexible grinding covers let you grind very close to corners and edges without damaging the walls etc.
MCS™ (Mist Cooler System)A small detail that makes a huge difference. A thin mist is sprayed over the floor preventing the metal tools to overheat. This significantly increase the machines stripping capacity. Up to 100% better removal rate is achieved.
EZchange™The HTC developed tool change system is quick, simple and safe. One tooling system for all HTC’s grinding machines. The only thing needed when changing tools is a rubber/plastic hammer.
Good working environmentHTC’s machines are perfectly balanced during grinding without any sideway forces and with vibration levels much lower than the threshold values. The sound levels are very low, and grinding is made more or less dust free.
The complete range of diamond floor grindersHTC’s floor polishing and grinding machines are appreciated by thousands of customers all over the world. The diamond floor grinders are available in several different sizes and versions depending on your needs and demands. As the leading manufacturer and supplier of floor grinding equipment we have the largest range of products. Our floor grinders cover everything from edges to huge areas of thousands of square meters and are suitable for floor preparation, grinding and polishing of for example natural stone, concrete and wooden floors.
HTCProfessional Floor SystemsGrinding machines
Innovations that make a difference
Model Art no.
1 x 230V 50 HZ EU 501054
1 x 230V 60 HZ US 113256
3 x 460V US 113325
Model Art no.
3 x 400V 50 HZ EU, Mist cooler 111566
3 x 460V US, Mist cooler 111565
Model Art no.
3 x 400V 50 HZ EU, Mist cooler 111570
3 x 460V US, Mist cooler 111571
Model Art no.
3 x 400V 50 HZ EU, Mist cooler 111569
3 x 460V US, Mist cooler 111568
Model Art no.
3 x 400V 50 HZ EU, Mist cooler 113481
3 x 400V US, Mist cooler 113430
Model Art no
3 x 400V 50 HZ EU 112947
3 x 460V US 112964
Model Art no
1 x 230V 50 HZ EU 112131
3 x 400V 60 HZ EU 112210
1 x 115V US 112132
Model Art no.
3 x 230V 50/60 HZ EU 111228
3 x 230V 50/60 HZ US 111298
Model Art no.
3 x 400V 50 HZ EU 111766
3 x 460V US 112087
Model Art no.
3 x 400V 50 HZ EU 111562
3 x 460V 60 HZ US 111601
www.htc-floorsystems.com
* Does not apply on HTC 2500 iX, HTC 1500 ixT and the Greyline-series.
Model Art no
HTC 1500 ixT 112457
Model Art no
HTC 80 iD, EU 501909
HTC 80 iD, US 113432
© 2011 H
TC S
wed
en AB
, All rights reserved
.
HTCProfessional Floor SystemsProduct guide
Head office
HTC Sweden AB
Box 69
SE-614 22 Söderköping
Sweden
Street (delivery) address:
Klevvägen 7
SE-614 92 Söderköping
Sweden
Tel.: +46 (0)121-29400
Fax: +46 (0)121-15212
E-mail: info@htc-sweden.com
www.htc-floorsystems.com
HTC France S.A.S.
ZI Mondeville Sud
10 Rue Nicéphore Niepce
14120 Mondeville
France
Tel.: +33 (0)2 31 34 27 00
Fax: +33 (0)2 31 34 09 29
E-mail: info@htc-europe.fr
www.htc-floorsystems.com
HTC Floor Systems Ltd.
Unit 4 Kingston Business Park
Dunfermline Court
Maidstone Road
Kingston
Milton Keynes
MK10 0BY
United Kingdom
Tel.: +44 (0 ) 845 460 2500
Fax: +44 (0) 845 460 1500
E-mail: info@htc-europe.co.uk
www.htc-floorsystems.com
HTC Inc.
5617 Tazewell Pike
Knoxville, TN 37918
USA
Tel.: +1 865 689 2311
Fax: +1 865 689 3991
E-mail: info@htc-america.com
www.htc-floorsystems.com
HTC Floor Systems GmbH
Im Petersfeld 7
65624 Altendiez
Germany
Tel.: +49 (0) 6432 / 64558 - 0
Fax: +49 (0) 6432 / 64558 - 22
E-mail: info@htc-europe.de
www.htc-floorsystems.com
Find your nearest HTC distributor at www.htc-floorsystems.com/partners
HTC head officeHTC subsidiariesHTC distributors
HTC - Original Diamond toolsBased upon substantial research and development, testing and experience, HTC produces a unique range of diamond tools to cover all the different type of procedures possible with the HTC diamond grinders. There are diamond tools suitable for anything from very rough grinding equal to scarifying to high gloss polishing of natural stone or concrete. Each tool has an explanation of its primary application.Please read more at www.htc-floorsystems.com
EZchange™ - easy and quick tool change on all HTC machines.
EZchange™ - The Instant tool change system is so ingeniously simple! No more jammed, rusted or broken screws, in fact, no screws at all! Place the tools in the compartment on the holder and with a light tap using a rubber hammer you’re ready for grinding, polishing or removal of coverings.
EZstart™ – only with HTC!
EZstart™ - a small detail that makes the difference.The grooved surface makes it easier for the tool to open and achieve maximum cutting capacity from the start. The grinding operation becomes more effective and delivers better results in less time.
Floor Prep tools Art no.
EZ T-Rex DOME A 211570
EZ T-Rex DOME A Protect segment 211567
EZ T-Rex DOME B 211569
EZ T-Rex DOME B Protect segment 211568
T-Rex® Gold 210767 (160mm) 210868 (220mmA)211293 (220mmB) 210869 (270mmA)210870 (270mmB)
T-Rex® EZchange™ Gold 210908
EZ T-Rex Super A 212454
EZ T-Rex Super A Protect segment 212455
EZ T-Rex Super B 212456
EZ T-Rex Super B Protect segment 212457
Metal bond diamond toolsfor concrete grinding
Art no. Quality of concrete
EZ C2 Gold 210807 (DS) 210808 (SS) C25
EZ C3 Grey 211146 (DS) 211857 (SS) C25
EZ C4 Brown 211142 C25
EZ C5 Black 211147 C25
EZ CA 0 Lilac 211772 (DS) 211773 (SS) C25-C35
EZ CA 1® Silver 211777 (DS) 211778 (SS) C25-C35
EZ CA 2 Gold 211782 (DS) 211783 (SS) C25-C35
EZ CA 3 Grey 211786 (DS) 211787 (SS) C25-C35
EZ CA 4 Brown 211791 (DS) 211792 (SS) C25-C35
EZ CA 5 Black 211795 (DS) 211796 (SS) C25-C35
EZ SF 0 Lilac 210885 (DS) 211217 (SS) C30-C45
EZ SF 1 Silver 210886 (DS) 211218 (SS) C30-C45
EZ SF 2 Gold 210887 (DS) 211219 (SS) C30-C45
EZ SF 3 Grey 210888 (DS) 211220 (SS) C30-C45
EZ SF 4 Brown 210890 (DS) 211221 (SS) C30-C45
EZ SF 5 Black 210891 (DS) 211222 (SS) C30-C45
EZ CX 2 Gold 212191 (DS) 212192 (SS) C40
EZ CX 3 Grey 212194 (DS) 212195 (SS) C40
EZ CX 4 Brown 212196 (DS) 212197 (SS) C40
EZ CX 5 Black 212276 (DS) 212277 (SS) C40
Fenix II Art no. Floor type
Fenix II 3 Grey (5”) 212447-3 (7”) 212448-3(9”) 212449-3(11”) 212450-3
Screedproducts
Fenix II 4 Brown (5”) 212447-4 (7”) 212448-4(9”) 212449-4 (11”) 212450-4
Screedproducts
Fenix II 5 Black (5”) 212447-5 (7”) 212448-5(9”) 212449-5 (11”) 212450-5
Screedproducts
Fenix II 6 Blue (5”) 212447-6 (7”) 212448-6 (9”) 212449-6 (11”) 212450-6
Screedproducts
Fenix II 7 Red (5”) 212447-7 (7”) 212448-7 (9”) 212449-7 (11”) 212450-7
Screedproducts
Fenix II 8 White (5”) 212447-8 (7”) 212448-8 (9”) 212449-8 (11”) 212450-8
Screedproducts
Fenix II 9 Yellow (5”) 212447-9 (7”) 212448-9 (9”) 212449-9 (11”) 212450-9
Screedproducts
Fenix II 10 Green (5”) 212447-10 (7”) 212448-10(9”) 212449-10 (11”) 212450-10
Screedproducts
HTC 420 - SPW rings Art no. Floor type
420 SPW 00 Brown 211004 Natural stone
420 SPW 01 Black 211006 Natural stone
420 SPW 02 Blue 211000 Natural stone
420 SPW 03 Red 211005 Natural stone
420 SPW 04 White 211001 Natural stone
420 SPW 05 Yellow 211002 Natural stone
420 SPW 06 Green 211003 Natural stone
EZgrind - for handheld machines Art no.
EZgrind Ø 130 Grey 40 211964
EZgrind Ø 130 Brown 60 211938
EZgrind Ø 130 Black 100 211942
EZgrind Ø 130 Blue 200 211943
EZgrind Ø 130 Red 400 211944
EZgrind Ø 130 White 800 211945
EZgrind Ø 130 Yellow 1500 211946
EZgrind Ø 130 Green 3000 211947
Cup grinding wheelsfor handheld machines
Art no.
T-Rex® cup wheel 212536 (125 mm)212537 (175 mm)
Gold 212505 (125 mm) 212510 (180 mm)
Brown 212506 (125 mm)
Black 212507 (125 mm)
Blue 212508 (125 mm)
Red 212509 (125 mm)
Wood grinding tools Art no.
EZ SL 30 Wood 212186
EZ SL 50 Wood 212187
EZ SL 70 Wood 212343
Sanding paper 10780 (40) 10781 (60) 10782 (80) 10783 (100) 10785 (120) 11082 (180)
Elastic tool holder EZ 180 3 112794
Tool holder wood sanding HTC 420
212231
Foamflex for wood sanding 211045
Pad holder 212243
Oil pad HTC 420 212010
Plastic bond diamond tools Art no. Floor type
EZ BBX 2 Gold 212852 Concrete
EZ BB 3 Grey 212042 Concrete
EZ BB 4 Brown 212043 Concrete
EZ BB 5 Black 212044 Concrete
EZ BB 6 Blue 212045 Concrete
EZ BB 7 Red 212046 Concrete
EZ BB 8 White 212047 Concrete
EZ SR 3 Grey 212360 Concrete
EZ SR 4 Brown 212361 Concrete
EZ SR 5 Black 212362 Concrete
EZ SR 6 Blue 212363 Concrete
EZ SR 7 Red 212364 Concrete
EZ SR 8 White 212365 Concrete
EZ SR 9 Yellow 212366 Concrete
EZ FP 10 Black 211494 Granite
EZ FP 20 Blue 211495 Granite
EZ FP 30 Red 211496 Granite
EZ FP 40 White 211497 Granite
EZ FP 50 Yellow 211498 Granite
EZ FP 60 Green 211499 Granite
EZ REP 00 Brown 211440 Marble, Limes., Terrazzo
EZ REP 01 Black 211441 Marble, Limes., Terrazzo
EZ REP 02 Blue 211439 Marble, Limes., Terrazzo
EZ REP 03 Red 211442 Marble, Limes., Terrazzo
EZ REP 04 White 211445 Marble, Limes., Terrazzo
EZ REP 05 Yellow 211443 Marble, Limes., Terrazzo
EZ REP 06 Green 211444 Marble, Limes., Terrazzo
Plastic rings for Natural stone grinding
Art no.
SGW 1 Silver 210968 (160mm) 210974 (220mm) 210980 (270mm)
SGW 2 Gold 210925 (160mm) 210975 (220mm) 210981 (270mm)
SGW 3 Grey 210970 (160mm) 210976 (220mm) 210982 (270mm)
SGW 4 Brown 210971 (160mm) 210977 (220mm) 210983 (270mm)
SGW 5 Black 210972 (160mm) 210978 (220mm) 210984 (270mm)
SGW 6 Blue 210973 (160mm) 210979 (220mm) 210985 (270mm)
EN
www.htc-floorsystems.com www.htc-floorsystems.comwww.htc-floorsystems.com
So
ft concrete
Hard
concrete
Diamond Xpress Art nr. Floor type
DX 3 Grey 212795-3 (230)212796-3 (270)
Marble, terrazzo, limestone, concrete
DX 4 Brown 212795-4 (230)212796-4 (270)
Marble, terrazzo, limestone, concrete
DX 5 Black 212795-5 (230)212796-5 (270)
Marble, terrazzo, limestone, concrete
DX 6 Blue 212795-6 (230)212796-6 (270)
Marble, terrazzo, limestone, concrete
DX 7 Red 212795-7 (230)212796-7 (270)
Marble, terrazzo, limestone, concrete
DX 8 White 212795-8 (230)212796-8 (270)
Marble, terrazzo, limestone, concrete
DX 9 Yellow 212795-9 (230)212796-9 (270)
Marble, terrazzo, limestone, concrete
DX 10 Green 212795-10 (230)212796-10 (270)
Marble, terrazzo, limestone, concrete