Streams to put in Table Properties to reportCase Flowsheet Stream Phase
Update Lists
Cases Flowsheets
Streams
Use Selected
Ascending (A-Z)
Sorting
Descending (Z-A)
Order Added
Use All
Output Worksheet
HYSYS Stream Reporter
1. Choose Streams 2. Choose Output Location
3. Choose Properties
Use
Version 1.6 (2nd Feb 2005), using HYSYS 2004 Type Library
Visibile Streams Only
Clear All
Workbook
D14
Streams Listbox Sorting Options: Ascending (A-Z) Descending (Z-A) Workbook = Same order as the streams on the currently active workbook page for the selected flowsheet. Order Added = (Previously called HYSYS Order) The order the streams were added to the flowsheet.
Brief Instructions
Properties to reportProperty Unit
Write Table
Output Worksheet
Add Sheet
Delete Sheet
2. Choose Output Location
3. Choose Properties 4. Write Table
Use
Delete
Save Current
Update List
Sort List ...
Version 1.6 (2nd Feb 2005), using HYSYS 2004 Type Library
Advanced ...
About
Options
Clear All
I9
How to use HSR: 1. Choose streams of which to report properties, by selecting them via the Cases, Flowsheets, and Streams listboxes and pressing the Use Selected button. 2. Choose an output location, by pressing the Add Sheet button and selecting the output worksheet in the listbox. 3. Choose the properties that you wish to report by choosing a Phase, Property and Unit in the in cell drop downs, or by choosing a saved property set. 4. Write the stream table by pressing the Write Table button. HSR can report properties from the following phases: Overall, Vapour, Light and Heavy (/Aqueous) Liquid, Combined Liquid, and Solid. It also allows stream User Variables to be reported by typing in the user variable "Tag." Additionally the values for any Property Correlations and User Properties can be reported. It is also possible to create formulae in the output table.
How to use HSR Case Comparison Tool: Streams on the Comparison sheet are compared to those on the Reference sheet. 1. Generate stream tables corresponding to the cases to be compared (These should have the same list of properties). Choose the worksheets corresponding to these in the Reference Worksheet and Comparison Worksheet listboxes. Press the Analyse streams on these worksheets button. This will lists of the streams in both cases. HSR automatically tries to match up like named streams - these matches can be changed if required. 2. Choose an output location, by pressing the Add Sheet button and selecting the comparison output worksheet in the listbox. 3. Write the table by pressing the Write Comparison Table button. For a full user guide, see the document: "HSR User Guide.doc"