Post on 07-Sep-2018
HOW TO VIEW YOUR CAMERAS REMOTELY FOR DVR SYSTEMS MODEL NUMBERS:
QSD9004, QSDR04RTC, QSDR008RTC, QSDR16RTC, QSDR16RTCB, QSDR174RTC
1 | P a g e
This guide is to instruct you on how to access your cameras on a computer outside of the network that your DVR is connected to.
STEP 1: Open Internet Explorer on the computer connected to the router you forwarded your ports from your DVR to.
STEP 2: Go to www.canyouseeme.org.
HOW TO VIEW YOUR CAMERAS REMOTELY FOR DVR SYSTEMS MODEL NUMBERS:
QSD9004, QSDR04RTC, QSDR008RTC, QSDR16RTC, QSDR16RTCB, QSDR174RTC
2 | P a g e
STEP 3: Your public IP is listed on this site.
STEP 4: Using Internet Explorer, enter your Public IP Address in the address bar on a computer outside of your network.
NOTE: If your HTTP port (Web port) is other than 80, you must enter it after your IP address followed by a colon. (:)
HOW TO VIEW YOUR CAMERAS REMOTELY FOR DVR SYSTEMS MODEL NUMBERS:
QSD9004, QSDR04RTC, QSDR008RTC, QSDR16RTC, QSDR16RTCB, QSDR174RTC
3 | P a g e
STEP 5: A small headline will appear as follows.
STEP 6: Right click on the headline and select “Run Add-on”.
STEP 7: A small box will appear; click “Run”. Once the ActiveX Control has successfully been added, press “F5” to refresh your browser.
HOW TO VIEW YOUR CAMERAS REMOTELY FOR DVR SYSTEMS MODEL NUMBERS:
QSD9004, QSDR04RTC, QSDR008RTC, QSDR16RTC, QSDR16RTCB, QSDR174RTC
4 | P a g e
STEP 8: A blue screen will appear. Enter your password from your DVR (default is 123456).
STEP 9: The following application will appear so that you may view your cameras.