Post on 04-Apr-2018
7/29/2019 How to Make Ip Address
1/3
How to make IP address
windows xp
1. we are connected to the network
2. click on the start menu > control panel
3. click 2 times in network connection
4. click right on the local area connection - propertis
5. after then click on internet protocol (TCP/IP) click propertis no IP
6. enter address and DNS
for example:
IP naddress : 10.10.1.45
subnet mask : 255.255.255.0
defolt gateway : 10.10.1.1
preferred DNS server : 192.168.40.1
7. klicfk ok > ok
8. finished
windows 7
1. First open your laptop or pc, if it is entered into the desktop, then click
Start and then click Control Panel.
2. if it is, we will go into the Control Panel, there will be plenty of options
for setting up anything in windows 7 us. because we want to download manually
setting the IP address then click Network and Internet.
3. then we will go into the menu Network and Internet, just click the Network
and Sharing Center.
4. After that go to the menu again, and click Change adapter settings.
5. then we will be faced with all the adapters that we have, because we will be
setting up the LAN IP then we select the Local Area Connection, right click on
it and select Properties.
Wireless is also the same for cuman in this case to LAN and Wireless are
different adapters so if you want to set up Wireless equally right click on the
Wireless Network Connection and select Properties.
6. Then we will go to the next menu, here for setting IP Address manually click
7/29/2019 How to Make Ip Address
2/3
2 times the Internet Protocol Version 4 (TCP / IP).
7. after that we will go into the menu Internet Protocol Version 4 (TCP / IP)
here there are many options therefore select Use the following IP Address
Fill in the IP Address, Subnet mask, and Gateway to the ip that you want. if you
want to include DNS simply type in the field Use the following DNS server
addresses. then click ok
Setting IP address in linux
linux :
Setting the IP Address
IP Address Linux On Linux there are several kinds of IP Address. There are IP
Permanent, Temporary IP, and IP Alias. Permanent IP is the IP that will be
stored even if we restart the OS. Unlike the Temporary IP would change if we
restart the OS. While IP Alias / Aliasing is
singgel mapping MAC
addresses
to multiple IP addresses. So we can install multiple IP Address by using one
ethetnet only. Ok .. straight course towards the configuration steps.
1. Permanent IP
The first step we did was open the interfaces file using a text editor. Here I
use nano as the text editor. Enter the command:
# Nano / etc / network / interfaces
The next step add the following script on the bottom line:
# The eth0 network interface
auto eth0
iface eth0 inet static
address 192.168.30.1
netmask 255.255.255.0
gateway 192.168.30.1
If you have press "Ctrl + x" and "y" and the last Enter. It is a command to save
the text editor nano. The last step is to restart the network. Enter the
command:
# / Etc / init.d / networking restart
Permanent IP we've become. To view the IP Address field, enter the command:
# Ifconfig
2. Temporary IP
Steps to create a Temporary IP is very easy and fast. We only stayed enter the
7/29/2019 How to Make Ip Address
3/3
command:
# Ifconfig eth0 192.168.5.1 netmask 255.255.255.0
Then you live to see the results with the ifconfig command earlier.
3. IP Alias
The first step to create the same IP Alias
IP Permanent. Ie open
the
interfaces file. Then add the following script on the bottom line:
# The eth0 network interface
auto eth0
iface eth0 inet static
address 192.168.31.1
netmask 255.255.255.0
gateway 192.168.31.1
# The eth0: 0 network interface
auto eth0: 0
iface eth0: 0 inet static
address 192.168.10.1
netmask 255.255.255.0
Then save the file and outgoing. After that, do not forget to restart the
network. re-enter the command:
# / Etc / init.d / networking restart
IP Alias is successful we make. If still in
doubt, please check
your IP by
using the ifconfig command earlier.