Transcript of How To Make a Small Engine Cylinder
- 1. How to Make aHow to Make a Small EngineSmall Engine
CylinderCylinder HywayUSA.comHywayUSA.com
- 2. Sand-like Cast of Ports Etc. Hollow parts of internal
channels and core will be plugged by this sand-like cast. It will
be removed after the metal is poured around and over it.
- 3. Mould Around Sandy Core Close the mould around the core,
ready to pour.
- 4. Fill Mould Pour in the liquid aluminum.
- 5. Cool Let the molten aluminum, newly poured into mould,
cool.
- 6. Open the Mould Once solidified and cooled, Open the mould to
reveal the newly formed small engine cylinder
- 7. Remove Cylinder Still hot Lift newly made cylinder out of
mould
- 8. Remove Excess Sand Fill CNC machinist Removes excess sandy
material from core
- 9. CNC Drill out holes of small engine
- 10. Honing Hone the small engine cylinder
- 11. Nikasil Plating Nickel Silicon Carbide is harder than steel
Improves heat conductivity and engine tolerances Electroplated onto
the cylinder bore
- 12. Inspection Final step Inspect the new small engine
cylinder