Post on 04-Apr-2018
7/29/2019 How to Installing PC
1/18
How to Installing PC
Introduction
Many people out there thinking that installing PC by them self is hard, actually is not.
Even thought PC is collection of piece electronic component that is hazardous in your mind,
but is not like what are u thinking about. Now PC component design safety and easy, you
dont need to be afraid that you will go wrong when you install it, because all the PC
component is design differently and safely, so all you need is just to make sure that all
component wire, slot, and position suitable with the another component. If you are not sure to
install a PC, these guidelines can be your basis.
Objective
The purpose of this project is for people guide how to install PC (personal computer)
and this is very useful for none expert public who interest in built and install their own PC.
Install own PC have many advantage such as people can add something inside their own PC.
We equip step by step all about install PC complete and clearly. People can follow the step
that we guidelines to install own PC and very useful for maximum using of PC.
The Main Issues
The main issue of install PC (personal computer) is to have our own satisfaction of
using computer. And had everything what we need inside our own PC and we will understand
if in case that we need to add or upgrade our PC. Like that we know that to install PC got
many complicated think inside, but here we like to solve that complicated think to become
easy way to install PC.
7/29/2019 How to Installing PC
2/18
Target Audience
Our target audience is people in the age of 15 years old until 35 years old, the age of
people who have interest in computer and got easy to understand the complicated think such
as installing PC.
Equipments / Tools
Flash MX 2004 (Free software) ACD See Pro2 Adobe Photoshop CS4 Camera Sony Alpha 300 Screwdriver
Web Structure
Screen size : 1000 x 800 pixels Action Script Next button & previous button Tween guide Text Importing image Movie clip Button Number of slide: 11 slides Sound
7/29/2019 How to Installing PC
3/18
PC Contents:
Motherboard : Gigabyte EP45-UD3R
CPU : Core 2 Duo E8400 processor
CD/DVD rom : Samsung 20X DVD-RW SATA
Graphic Card : Asus EAH3650
Hard Disk : Western Digital 500GB SATA
Casing : Cooler Master Full Tower
CPU Cooler : Cooler Master 5 pipe Heat sink
Power Supply : Cooler Master 450W
Memory (RAM) : Kingston 2GB DDR2
System Fan : Zalman 12 fan
7/29/2019 How to Installing PC
4/18
Main Menu
About Us
7/29/2019 How to Installing PC
5/18
1
2
3
4
5
6
7
8
9
10
11
12
7/29/2019 How to Installing PC
6/18
13
14
15
16
17
18
1. Installing CPU
Step 1:
Completely raise the CPU socket lever. (Picture no. 4)
Step 2:
Lift the metal load plate from the CPU socket. (DO NOT touch socket contacts)
(Picture no. 5)
Step 3:
Remove the protective socket cover from the load plate. (Picture no. 6)
Step 4:
Hold the CPU with your thumb and index fingers. Align the CPU pin one marking (triangle)
with the pin one corner of the CPU socket (or you may align the CPU notches with the socket
alignment keys) and gently insert the CPU into position. (Picture no. 7)
7/29/2019 How to Installing PC
7/18
Step 5:
Once the CPU is properly inserted, replace the load plate and push the CPU socket lever back
into its locked position. (Picture no. 8)
2. Installing CPU Cooler
Step 1:
Apply an even and thin layer of thermal grease on the surface of the installed CPU.
Step 2:
Place the cooler atop the CPU. (Make Sure 4 screws insert correctly into the 4 holes)
(Picture no. 10)
Step 3:
Put in the screw holder. (Picture no. 12)
Step 4:
Screw up every single screw. (Picture no. 13)
Step 5:
Place fan CPU cooler atop the CPU cooler and screw it up. (Picture no. 17)
7/29/2019 How to Installing PC
8/18
1
2
3
4
3. Installing Memory (RAM)
Step 1:
Note the orientation of the memory module. Spread the retaining clips at both ends of the
memory socket. Place the memory module on the socket. Place your fingers on the top edge
of the memory, push down on the memory and insert it vertically into the memory socket.
(Picture no. 3)
Step 2:
The clips at both ends of the socket will snap into place when the memory module is securely
inserted. (Picture no. 4)
7/29/2019 How to Installing PC
9/18
1
2
3
4
4. Installing CD/DVD rom
Step 1:
Insert the CD/DVD rom into the slot. (from front side) (Picture no. 3)
Step 2:
Locked up the CD/DVD rom. (Picture no. 4)
7/29/2019 How to Installing PC
10/18
1
2
3
5. Installing Hard Disk
Step 1:
Insert the hard disk into hard disk slot. (Inside the casing) (Picture no. 2)
Step 2:
Locked up the hard disk. (Picture no. 3)
Notice: there is two slots behind the CD/DVD rom and Hard Disk, that is for SATA power
and SATA connector.
7/29/2019 How to Installing PC
11/18
1
2
3
6. Installing System Fan
Step 1:
Put the system fan into the casing. (Inside the casing, back panel) (Picture no. 2)
Step 2:
Screw up from rear side of casing. (Picture no. 3)
1
2
3
7. Installing Motherboard (into casing)
Step 1:
Put the Motherboard into inside the casing. (Picture no. 2)
Step 2:
Screw up the Motherboard. (Picture no. 3)
7/29/2019 How to Installing PC
12/18
1
2
3
4
5
6
7
8
8. Installing Graphic Card
Step 1:
Insert graphic card into graphic card slot in motherboard. (Picture no. 3)
Step 2:
Make sure it also in casing rear slot. (Picture no. 4)
Step 3:
Lock the graphic card to the motherboard and casing.
7/29/2019 How to Installing PC
13/18
1
2
3
4
9. Installing Power Supply
Step 1:
Put in the power supply into the casing. (From inside) (Picture no. 3)
Step 2:
Screw up the power supply from rear side of casing. (Picture no. 4)
7/29/2019 How to Installing PC
14/18
1
2
3
4
5
6
7
8
9
10
11
12
7/29/2019 How to Installing PC
15/18
13
14
15
16
17
18
19
20
21
22
23
24
7/29/2019 How to Installing PC
16/18
10. Installing Wires
A. ATX (2x4 12Vand 2x12 main power connector)
Attach ATX 2x4 and 2x12 power connector (power supply wire) to the ATX power slot
header on the Motherboard. (Picture no. 4)
B. SATA
Attach SATA connector to the SATA slot header on the motherboard and attach another side
of SATA connector to the hard disk and CD/DVD rom SATA slot. (Picture no. 7)
C. USB (front)
Attach USB connector (casing wire) to the USB slot header. (Picture no. 11)
D. Audio (front)
Attach audio connector (casing wire) to the AUDIO slot header. (Picture no. 14)
E. System fan
Attach System fan wire connector to the system fan slot header. (Picture no. 17)
F. System Power LED
Attach System power LED wire connector into the System power LED header.
(Picture no. 22)
G. SATA power wire
Attach SATA power wire (power supply) into the CD/DVD rom and hard disk SATA power
slot. (Picture no. 24)
7/29/2019 How to Installing PC
17/18
Conclusion
All the information in these guidelines is suitable for beginners and this support
information for people about required hardware, such as motherboard, hard disk and other.
We provide illustration with picture step by step to guide fit every part together into PC.
Install PC is easy and not as hard as people think, you just need to follow our
guidelines and everything will be easy, with these guidelines people dont need to think twice
to install their own PC, so try to install own PC is fun.
7/29/2019 How to Installing PC
18/18
Reference:
1. An Introduction to the Personal Computer:http://www.buildyourown.org.uk/pc-information/introduction/
2. Gigabyte mother board GA-EP45-UD3R/UD3 hand book guide.
http://www.buildyourown.org.uk/pc-information/introduction/http://www.buildyourown.org.uk/pc-information/introduction/