Post on 10-Jun-2018
Honeywell Fall Prevention and Protection Training
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
1
Providing world class training for maintaining a safe
work environment
• Experienced instructors, live demonstrations and hands-on training
• Instructors are Qualified Person per OSHA’s Walking Working
• Surfaces rule
• Open Enrollment Courses available in over 30 cities in US and Canada
• Addresses site-specific variables and performance requirements for a
variety of applications and work site needs
• Online booking tool enables customers to review and reserve available
open enrollment courses with a few simple clicks:
millerfallprotection.com
• Each participant will receive a certificate after successful course
completion
• All courses require a minimum number of participants
AT HEIGHT TRAINING
Fall Protection Rescue (Basic Rescue)
This course is designed for any supervisor or personnel working at heights in construction or general industry. This course
teaches the basics of self-rescue as well as assisting a fall victim. Participants will expand their rescue skills as well as better
understand the requirements of OSHA, ANSI and CSA as it applies to rescue. Participants will be involved in practical hands-
on work and should dress accordingly.
Course Length: 16 hours (2-day course) Time: 8 a.m. to 5 p.m. Cost: $975 per participant
Fall Protection Rescue (Advance Rescue)
This course is designed for all personnel who work at heights, particularly on open structures. Individuals are taught the
required skills to safely set up rescue equipment to rescue victims stranded at height, having first taken into consideration the
likely injuries sustained. This course involves both multi-media presentations and hands-on workshops that require participants
to actively climb and perform rescues with our instructors' guidance. Participants should dress accordingly.
Prerequisite Training: Competent Person OR Fall Protection Rescue (Basic Rescue)
Course Length: 16 hours (2-day course) Time: 8 a.m. to 5 p.m. Cost: $1075 per participant
Authorized Tower Climber / Rescuer
This course is designed for new tower climbers. This fast paced training program meets the National Association of Tower
Erectors climber training standards. The program provides climbers with a comprehensive overview of the highest regulatory
and safety standards in the industry – Including OSHA, ANSI, and State Plan regulations and standards. The training provides
See pages 1-14
for complete listing of U.S.
dates and locations.
See pages 15-22
for complete listing of Canada
dates and locations.
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
2
individuals with the required skills and knowledge to safely recognize, evaluate and control hazards related to tower work. It
also teaches participants climbing techniques, proper selection of fall protection equipment and how to properly plan, set up
rescue equipment, and rescue a victim through simulated drills. This course includes both classroom and hands-on training
Course Length: 16 hours (2-day course) Time: 8 a.m. to 5 p.m. Cost: $895 per participant
Also available in Spanish
Course Length: 16 hours (2-day course) Time: 8 a.m. to 5 p.m. Cost: $895 per participant
Also available in Spanish
FALL PREVENTION & PROTECTION AWARENESS TRAINING
Fall Prevention & Protection Awareness (User) Training
A four-hour awareness course designed for individuals with daily or weekly exposure to fall hazards. Designed for Non-supervisory personnel with limited knowledge of fall hazards or protection procedures. Participants gain knowledge and skills necessary to identify and avoid hazards associated with elevated work locations. The course features a series of presentations, demonstrations and hands-on exercises.
Course Length: 4 hours (1/2 day course) Time: 8 a.m.to 12 p.m. Cost: $225 per participant*
COMPETENT PERSON TRAINING
Construction Industry
This intermediate level course is designed for Construction Industry employees who serve as the "competent person" required
by OSHA 1926.32(f), and 1926.500 regulations. Participants are provided detailed classroom theory with hands-on tasks that
require evaluation for fall hazards. This course also supplies the participant with the knowledge and skills to perform the
semiannual and annual inspection.
General Industry
This intermediate level course is designed for General Industry employees who serve as the "competent person" under
OSHA’s walking-working surface standard; OSHA 1910. Participants are provided detailed classroom theory with hands-on
tasks that require evaluation for fall hazards. This course also supplies the participant with the knowledge and skills to perform
the semiannual and annual inspection. Subpart D & I are reviewed.
Course Length: 16 hours (2-day course) Time: 8 a.m. to 5 p.m. Cost: $850 per participant*
Competent Tower Climber / Rescuer
This course is designed for experienced climbers. This course includes both classroom and hands-on training. Participants
will experience climbing and rescue scenarios beyond rescue scenarios covered in the 16-hr Authorized Climber training
class. This fast paced training program meets the National Association of Tower Erectors climber training standards. The
program provides climbers with a comprehensive overview of the highest regulatory and safety standards in the industry –
Including OSHA, ANSI, and State Plan regulations and standards. The training provides individuals with the required skills and
knowledge to safely recognize evaluate and control hazards related to tower work. It also teaches participants climbing
techniques, proper selection of fall protection equipment and how to properly plan, set up rescue equipment, and rescue a
victim through simulated drills.
Prerequisite: 16-hr Authorized Tower Climber class & 90 days climbing experience documented.
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
3
Competent Person Refresher
8-hour Fall Prevention & Protection training course designed for previously trained competent persons. This training course
covers the highlights and most recent changes required by OSHA 1926.32(f), 1926.500 and 1910 fall protection standards for
General Industry and Construction. Course highlights include work applications and scenarios as well as new regulatory and
fall protection product developments.
Prerequisite: 16-hr Competent Person current certificate must accompany registration
Course Length: 8 hours (1-day course) Time: 8 a.m. to 5 p.m. Cost: $495 per participant*
(If attend day one of 16-hr class: $565 per participant)
Competent Person for the U.S. Military
This three-day course is designed for facility workers and site supervisors who must also serve as the competent person in fall protection required by OSHA 1926.32(f), 1926.500 and 1910 standards. The training also provides experience, methodology and in-depth look at all standards (ANSI) and regulations (OSHA) covering inspection of personal fall arrest systems. Participants are assigned tasks which require evaluation for fall hazards. The tasks are described using real-life site photos. The training provides more detailed coverage of the Fall Prevention & Protection Training course materials and the following program topics. The course also supplies the participant with the knowledge and skills to perform the annual inspection and record keeping.
Course Length: 24 hours (3-day course) Time: 8 a.m. to 5 p.m. Cost: $1,175 per participant
24HR Competent Person EM385.1 Fall Protection Training for USACE & Contractors
This course is designed for facility and site supervisors who must also serve as the competent person required by EM385-1-1
Army Corps of Engineers requirements. The training provides detailed coverage of fall prevention and protection, roles of the
worker, building a fall protection system, pre-use and component person inspection, and recognizing evaluating and controlling
the risks or hazards. As requested by the USACE this course covers Section 1, 21, & 24 in the EM 385.1 manual.
Course Length: 24 hours (3-day course) Time: 8 a.m. to 5 p.m. Cost: $1,175 per participant
Refresher Length: 8-hours (1-day course) Time: 8 a.m. to 5 p.m. Cost: $600 per participant
FALL PROTECTION INSPECTION TRAINING
Fall Protection Equipment Inspection
The Fall Protection Equipment Inspection Course provides experience, methodology and in-depth look at all ANSI standards
and OSHA regulations covering inspection of personal fall arrest systems. It is designed for a tool crib worker who needs to
inspect the equipment prior to issuing to the users, but does not have the level of responsibility the competent person does, or
for the newly trained "competent person" who is responsible for the annual inspection of personal fall arrest systems.
Course Length: 8 hours (1-day course) Time: 8 a.m.to 5 p.m. Cost: $525 per participant*
Also available in Spanish
*Order both Competent Person and Fall Protection Inspection Training for a discounted cost: $1,175.00. Both courses must be attended on consecutive days.
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
4
CONFINED SPACE TRAINING
Confined Space & Confined Space Entry
This entry level course is designed for individuals responsible for confined space entry, planning, supervising, or for
administrating employees that work in confined spaces in both general industry and construction. A detailed review of confined
space regulations, typical atmospheric, physical, and mechanical hazards are taught and explained. Control measures are
provided along with a number of application exercises focusing on confined space equipment, inspection, gas detection and
atmospheric testing, and non-entry and entry rescue are discussed and reviewed. This confined space course meets or
exceeds OSHA 7300, 29 CFR 1910.146 and 29 CFR 1926.1200 – 1213 (permit required confined space regulations
requirements).
Course Length: 16 hours (2-day course) Time: 8 a.m. to 5 p.m. Cost: $925 per participant
Confined Space Rescue
The Confined Space Rescue course will teach rescue techniques for workers who work in areas with limited or restricted entry
and exit. This course is applicable with 29 CFR 1910.146 Subpart J, better known as Permit Required Confined Spaces. A
review of the Confined Space OSHA regulations, rescue regulations and application of various confined space entry/rescue
equipment with hands-on rescue skill training will be included.
Prerequisite Training: Confined Space & Confined Space Entry Training
Course Length: 8 hours (1-day course) Time: 8 a.m.to 5 p.m. Cost: $550 per participant
OSHA TRAINING
OSHA 10-Hour Construction
This 10-hour training course meets OSHA 29 CFR 1926 requirements. Upon successful completion of the course, participants
will receive a course completion card. All participants will take a pre-test followed by class work on required and selected
OSHA topics.
Course Length: 2-day course Time: 8 a.m. to 2 p.m. Cost: $295 per participant
OSHA 10-Hour General Industry
This 10-hour training course meets OSHA requirements for providing general industry workers awareness in recognizing and
practicing around hazards at a general industry site. Upon successful completion of the course, participants will receive a
course completion card. All participants will take a pre-test followed by class work on required and selected OSHA topics.
Course Length: 2-day course Time: 8 a.m. to 2 p.m. Cost: $295 per participant
OSHA 30-Hour Construction
Construction professionals at every level will learn to identify the most common hazards found on construction sites, locate the
correct standard in 29 CFR 1926 and discuss various construction processes, materials and equipment. Participants will
receive the 30-hour construction card upon course completion.
Course Length: 4-day course Time: 8 a.m. to 5 p.m. Cost: $695 per participant
OSHA 30-Hour General Industry
This introductory course was developed by OSHA for general industry personnel to learn about occupational safety and health
and OSHA standards. All participants will receive the 30-hour general industry card upon completion of the course.
Course Length: 4-day course Time: 8 a.m. to 5 p.m. Cost: $695 per participant
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
5
OSHA Residential Fall Hazards
This 8-hour course is designed for residential construction workers, working six feet or more above a lower level and will help
participants understand OSHA's 29 CFR Part 1926, STD 03-11-002 Compliance Guidance for Residential Construction. This
course will instruct participants on the new OSHA 1926.501K regulation for contractors working on residential rooftops and will
basic fall protection and personal fall protection systems that will help lessen or eliminate potential fall hazards during the
numerous stages of residential construction.
Course Length: 8 hours (1-day course) Time: 8 a.m.to 5 p.m. Cost: $595 per participant
OIL AND GAS TRAINING
AWARE IADC/RIGPASS Orientation
This course is designed to educate employers and employees on the recognition, avoidance, and prevention
of hazards specific to the Oil and Gas industry. Using a picture-based curriculum, AWARE, proves to relate
safety hazards in a practical and clear manner for employees. This course is delivered in 13 modules that
must equal 8 hours of total training. This program is accredited by the IADC RigPass Program and meets
SafeLandUSA endorsement criteria. The presenter is an approved RigPass Instructor.
Reference Text: OSHA 29 CFR 1926, 1910, OSHA 5810.
Course Length: 8 Hours (1-day course) Time: 8 a.m. to 5 p.m. Cost: $245.00
TRAIN THE TRAINER
Train the Trainer Programs are designed to supply the participants with the knowledge & tools to develop their own training.
Participants are not allowed to use, copy or replicate Honeywell training programs
Fall Protection Train the Trainer for the Qualified Person
Fall protection has developed over the years into a complex field of safety engineering; the subject matter of this four-day
comprehensive course is complex and dynamic. It is designed to give the participants knowledge in very specific areas.
Course is designed for Supervisory Personnel, Safety Managers, Foremen, Crew Chiefs and Job Site Superintendents who
are responsible for providing fall protection training. We require those attending have attended other fall protection classes
including basic knowledge on principles, practices, and terminology. This is NOT a training course on fall protection and is
designed to assist you to the qualified person level. This class reviews the competent person and walking working sections of
the OSHA regulations. This program will give you enough training material for the student to create their own fall protection
program for their company.
This class is intended for an experienced individual who is responsible for providing fall protection training to their employee(s)
at awareness/authorized user level. It does NOT deem the participant a Qualified Trainer upon completion. That is the
employer’s requirement.
Prerequisite Training: Miller by Honeywell’s 16-hr Competent Person
Course Length: 32 hours (4-day course) Time: 8 a.m.to 5 p.m. Cost: $2,100 per participant
Wind Energy Train the Trainer
The rapid growth and interest in wind energy over the past few years have resulted in a variety of safety issues and concerns
with little regulatory influence or guidance. The training content in this 4-day comprehensive course is complex and dynamic,
while providing participants with an in-depth insight and understanding of the specific safety challenges facing this industry.
Adult training techniques are key components of this training course. All participants are asked to conduct a mini-training
course as part of the curriculum.
Course Length: 32 hours (4-day course) Time: 8 a.m.to 5 p.m. Cost: $2,100 per participant
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
6
Confined Space Train the Trainer
This course is designed to teach participants how to teach and develop their own confined space training program for their
place of employment. It teaches skills and offers an in-depth review of regulations from 29 CFR 1910.146 Subpart J – Permit
Required Confined Spaces.
Prerequisite Training: 2-day Confined Space & Confined Space Entry AND 1-Day Confined Space Rescue.
(Total 4-day price: $2,075)
Course Length: 8 hours Time: 8 a.m.to 5 p.m. Cost: $800 per participant
WIND ENERGY TRAINING
Wind Energy 8-Hour Basic Height Safety
The Wind Energy Basic Height Safety Training Course is basic work-at-height training for individuals who are not directly
employed as wind energy engineers or technicians, but who may have an occasional need to climb a wind turbine under
supervised conditions. This is an 8-hour classroom course.
Course Length: 8 hours Time: 8 a.m.to 5 p.m. Cost: $675 per participant
Wind Energy 16-Hour Competent Climber
The rapid growth and interest in wind energy over the past few years have resulted in a variety of safety issues and The Wind
Energy Competent Climber Training Course fulfills the basic work-at-height training requirements for field technicians and
engineers employed within the wind energy sector. The first day is all classroom; day two is hands-on application training.
Wear climbing shoes and jeans.
Course Length: 16 hours (2-day course) Time: 8 a.m. to 5 p.m. Cost: $1025 per participant
ON-SITE TRAINING AT YOUR FACILITY OR WORK-SITE
On-Site/Contract
Honeywell is the leading provider of on-site training options, conveniently held at your facility or work-site. Schedule one of our
Training experts to work with your employees in their own environment. Classes encourage instructor/student interaction to
prevent a “lecture” atmosphere.
Basic Requirements (Fall Protection Courses):
-Electrical outlets for equipment
- Flip chart, markers, easel / White wall or projection screen
- Dedicated table for instructor for equipment (front of Class)
- Meeting room to accommodate expected number of participants
- Orientation, Awareness and Competent Person courses require anchor point that can support 2X the weight of the
heaviest person in the class
Additional Requirements for Specialty Courses:
- Authorized Tower Climber / Rescuer & Competent Tower Climber / Rescuer Training; tower, scaffolding, or approved
multi-level surface to perform the hands on portion of the class
- Basic Rescue; tower, scaffolding, or multi-level surface to perform the hands-on portion of the class
- Confined Space Rescue; a clean and cleared vessel in which to perform horizontal and vertical rescue
- High Access Rescue; tower, scaffolding, or multi-level surface to perform the hands-on portion of the class
- Wind Energy Competent Climber; wind nacelle to perform hands on exercises
All open enrollment classes can be quoted for on-site training. In addition to the advertised classes, we also offer:
-Walking Working Surfaces for General Industry -Competent Person for the Construction Industry
-Aerial Work Platform -First Aid, CPR, AED (Heartsaver)
-Haz Comm, HazMat, Hazwoper
Request a Quote for On-Site, Contract
Training: www.millerfallprotection.com
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
7
SELF-CONTAINED BREATHING APPARATUS (SCBA)
AND SUPPLIED-AIR RESPIRATOR (SAR) CERTIFIED
TECHNICIAN TRAINING COURSES
Panther™/Cougar™ SCBA and Panther Hip-Pac®/SAR Systems
This training course is designed to instruct personnel who will be responsible for repair, maintenance, documentation, and
troubleshooting of the Panther/Cougar SCBA and/or Panther Hip-Pac/SAR systems. Participants will expand their knowledge
regarding government and industry standards and regulations affecting maintenance and use of these systems. Participants
will be involved in practical, hands-on, rebuild and testing of these pneumatic systems.
NOTE: Panther Hip-Pac®/SAR certification is an optional class held on day two of the Panther/Cougar SCBA course.
Course Length: 16 Hours (2-day course) Time: 8 a.m. - 5 p.m. (in CA: 7:25 a.m. - 5 p.m.) Cost: $350.00
SCBA/SAR Re-Certification
This course is designed to allow personnel who hold current Panther™, Cougar™, and Warrior SCBA or Panther Hip-
Pac®/SAR system Technician certification an efficient, skill-based course to validate and renew their certification. Participants
will be required to provide PosiChek3 flow test results as evidence of current work on the pneumatic systems (PosiCheck3 is a
calibrated piece of test equipment utilized to verify that the pneumatic systems are working appropriately to meet government
standards).
Prerequisites: Evidence of current Panther™, Cougar™ or Warrior SCBA and/or Panther Hip-Pac®/SAR System certification.
In addition, PosiChek3 flow test results (5 test results per system) must be performed within 90 days of the
re-certification course.
Course Length: 8 Hours (1-day course) Time: 8 a.m. to 5 p.m. (in CA: 7:25 a.m. - 5 p.m.) Cost: $195.00
TitanTM Series SCBA
This training course is designed to instruct personnel who will be responsible for repair, maintenance, documentation, and
troubleshooting of the Titan™ SCBA and/or Panther Hip-Pac®/SAR systems. Participants will expand their knowledge
regarding government and industry standards and regulations affecting the maintenance and use of these systems.
Participants will be involved in practical, hands-on rebuild and testing of these pneumatic systems.
NOTE: Panther Hip-Pac/SAR certification is an optional class held on day two of the Titan SCBA course.
Course Length: 16 Hours (2-day course) Time: 8 a.m. – 5 p.m. (in CA: 7:25 a.m. – 5 p.m.) Cost: $395.00
WarriorTM to TitanTM SCBA Technician Re-Certification
This course is designed to allow personnel who hold current Warrior SCBA Technician certification an efficient, skill-based
course to update and transfer their current Warrior certification to the Titan SCBA. Participants will be required to provide
PosiChek flow test results as evidence of current work on Warrior SCBA systems.
NOTE: PantherTM, CougarTM SCBA and Panther Hip-Pac®/SAR re-certification may also be accomplished during the
WarriorTM SCBA to TitanTM SCBA Re-certification and Update Course. The following prerequisites apply.
Prerequisites: Evidence of current Warrior SCBA certification and 5 PosiChek flow test results personally performed by the
participant and dated within 90 days of this re-certification course.
Course Length: 8 Hours (1-day course) Time: 8 a.m. – 5 p.m. (in CA: 7:25 a.m. – 5 p.m.) Cost: No Charge
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
8
Fall Prevention & Protection Courses
Awareness (User)
Course Title Start End Location Country
Price
(per person)
Fall Prevention & Protection Awareness 1/23/18 1/23/18 Franklin, PA US $225
Fall Prevention & Protection Awareness 2/13/18 2/13/18 Pasadena TX US $225
Fall Prevention & Protection Awareness 6/28/18 6/28/18 Pasadena TX US $225
Fall Prevention & Protection Awareness 7/18/18 7/18/18 Pasadena TX US $225
Fall Prevention & Protection Awareness 7/10/18 7/10/18 Franklin, PA US $225
Fall Prevention & Protection Awareness 10/11/18 10/11/18 Pasadena TX US $225
Fall Prevention & Protection Awareness 11/9/18 11/9/18 Franklin, PA US $225
Competent Person & Fall Protection Equipment Inspection
Competent Person Price (per person)
Fall Protection Equipment Inspection Price
(per person) Location Country
Start End Start End
1/9/18 1/10/18 $850 1/11/18 1/11/18 $525 Santa Ana CA US
1/31/18 2/1/18 $850 2/2/18 2/2/18 $525 Trenton NJ US
2/6/18 2/7/18 $850 2/8/18 2/8/18 $525 Pasadena TX US
2/13/18 2/14/18 $850 2/15/18 2/15/18 $525 Pasadena TX
(Spanish) US
2/13/18 2/14/18 $850 2/15/18 2/15/18 $525 Indianapolis IN US
2/20/18 2/21/18 $850 2/22/18 2/22/18 $525 Franklin PA US
3/6/18 3/7/18 $850 3/8/18 3/8/18 $525 Phoenix AZ US
3/6/18 3/7/18 $850 3/8/18 3/8/18 $525 Atlanta GA US
3/7/18 3/8/18 $850 3/9/18 3/9/18 $525 Trenton NJ US
3/13/18 3/14/18 $850 3/15/18 3/15/18 $525 Detroit MI US
3/20/18 3/21/18 $850 3/22/18 3/22/18 $525 Milwaukee WI US
3/20/18 3/21/18 $850 3/22/18 3/22/18 $525 Charleston SC US
3/20/18 3/21/18 $850 3/22/18 3/22/18 $525 Franklin PA US
3/27/18 3/28/18 $850 3/29/18 3/29/18 $525 Memphis TN US
4/10/18 4/11/18 $850 4/12/18 4/12/18 $525 Pasadena TX US
4/10/18 4/11/18 $850 4/12/18 4/12/18 $525 Pasadena TX
(Spanish) US
4/10/18 4/11/18 $850 4/12/18 4/12/18 $525 Chicago IL US
4/17/18 4/18/18 $850 4/19/18 4/19/18 $525 Santa Ana, CA US
5/15/18 5/16/18 $850 5/17/18 5/17/18 $525 Indianapolis IN US
5/23/18 5/24/18 $850 5/25/18 5/25/18 $525 Trenton NJ US
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
9
Competent Person Price (per person)
Fall Protection Equipment Inspection Price
(per person) Location Country
Start End Start End
6/5/18 6/6/18 $850 6/7/18 6/7/18 $525 Charlotte, NC US
6/12/18 6/13/18 $850 6/14/18 6/14/18 $525 Pasadena, TX US
6/19/18 6/20/18 $850 6/21/18 6/21/18 $525 Spokane, WA US
7/11/18 7/12/18 $850 7/13/18 7/13/18 $525 Trenton, NJ US
7/17/18 7/18/18 $850 7/19/18 7/19/18 $525 Las Vegas, NV US
7/31/18 8/1/18 $850 8/2/18 8/2/18 $525 Franklin, PA US
7/31/18 8/1/18 $850 8/2/18 8/2/18 $525 Pasadena, TX US
8/7/18 8/8/18 $850 8/9/18 8/9/18 $525 Pasadena, TX
(Spanish) US
8/7/18 8/8/18 $850 8/9/18 8/9/18 $525 Tampa, FL US
8/14/18 8/15/18 $850 8/16/18 8/16/18 $525 Santa Ana, CA US
8/14/18 8/15/18 $850 8/16/18 8/16/18 $525 Memphis, TN US
8/14/18 8/15/18 $850 8/16/18 8/16/18 $525 Indianapolis, IN US
8/21/18 8/22/18 $850 8/23/18 8/23/18 $525 Charlotte, NC US
8/28/18 8/29/18 $850 8/30/18 8/30/18 $525 Atlanta, GA US
8/28/18 8/29/18 $850 8/30/18 8/30/18 $525 Greensboro, NC US
9/18/18 9/19/18 $850 9/20/18 9/20/18 $525 Chicago, IL US
9/18/18 9/19/18 $850 9/20/18 9/20/18 $525 Las Vegas, NV US
9/19/18 9/20/18 $850 9/21/18 9/21/18 $525 Trenton, NJ US
9/25/18 9/26/18 $850 9/27/18 9/27/18 $525 Asheville, NC US
10/2/18 10/3/18 $850 10/4/18 10/4/18 $525 Southport, NC US
10/2/18 10/3/18 $850 10/4/18 10/4/18 $525 TBD IA US
10/16/18 10/17/18 $850 10/18/18 10/18/18 $525 Paducah, KY US
10/16/18 10/17/18 $850 10/18/18 10/18/18 $525 Franklin, PA US
10/23/18 10/24/18 $850 10/25/18 10/25/18 $525 Santa Ana, CA US
10/30/18 10/31/18 $850 11/1/18 11/1/18 $525 Pasadena, TX US
10/30/18 10/31/18 $850 11/1/18 11/1/18 $525 Pasadena, TX
(Spanish) US
11/6/18 11/7/18 $850 11/8/18 11/8/18 $525 Chicago, IL US
11/1318 11/14/18 $850 Not Offered Not Offered n/a Dallas, TX US
11/7/18 11/8/18 $850 11/9/18 11/9/18 $525 Trenton NJ US
11/13/18 11/14/18 $850 11/15/18 11/15/18 $525 Indianapolis IN US
11/27/18 11/28/18 $850 11/29/18 11/29/18 $525 Orlando FL US
11/27/18 11/28/18 $850 11/29/18 11/29/18 $525 Franklin PA US
12/4/18 12/5/18 $850 12/6/18 12/6/18 $525 Pasadena TX US
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
10
EM385.1 Fall Protection Training for USACE & Contractors (24-HR Competent Person)
Course Title Start End Location Country Price
EM385.1 Fall Protection Training for USACE 1/23/18 1/25/18 Pasadena TX US $1,175
EM385.1 Fall Protection Training for USACE 1/30/18 2/1/18 Franklin, PA US $1,175
EM385.1 Fall Protection Training for USACE 2/20/18 2/22/18 Santa Ana, CA US $1,175
EM385.1 Fall Protection Training for USACE 2/27/18 3/01/18 Franklin, PA US $1,175
EM385.1 Fall Protection Training for USACE 3/13/18 3/15/18 Pasadena TX US $1,175
EM385.1 Fall Protection Training for USACE 4/3/18 4/5/18 Franklin, PA US $1,175
EM385.1 Fall Protection Training for USACE 4/10/18 4/12/18 Santa Ana, CA US $1,175
EM385.1 Fall Protection Training for USACE 5/22/18 5/24/18 Franklin, PA US $1,175
EM385.1 Fall Protection Training for USACE 6/26/18 6/28/18 Franklin, PA US $1,175
EM385.1 Fall Protection Training for USACE 7/24/18 7/26/18 Franklin, PA US $1,175
EM385.1 Fall Protection Training for USACE 8/21/18 8/23/18 Santa Ana, CA US $1,175
EM385.1 Fall Protection Training for USACE 8/28/18 8/30/18 Pasadena, TX US $1,175
EM385.1 Fall Protection Training for USACE 10/2/18 10/4/18 Franklin, PA US $1,175
EM385.1 Fall Protection Training for USACE 10/16/18 10/18/18 Las Vegas, NV US $1,175
EM385.1 Fall Protection Training for USACE 11/6/18 11/8/18 Franklin, PA US $1,175
EM385.1 Fall Protection Training for USACE 11/13/18 11/15/18 Santa Ana, CA US $1,175
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
11
Competent Person for the U.S. Military
Course Title Start End Location Country Price
Competent Person for the U.S. Military 3/20/18 3/22/18 Pasadena TX US $1,175
Competent Person for the U.S. Military 3/20/18 3/22/18 Franklin US $1,175
Competent Person for the U.S. Military 5/15/18 5/17/18 Franklin US $1,175
Competent Person for the U.S. Military 7/10/18 7/12/18 Pasadena TX US $1,175
Competent Person for the U.S. Military 7/31/18 8/2/18 Franklin US $1,175
Competent Person for the U.S. Military 11/27/18 11/29/18 Franklin US $1,175
Competent Person Refresher
Prerequisite Training: 16-hr Competent Person (Certificate must accompany registration)
Course Title Start End Location Country Price
(per person)
Competent Person Refresher 1/30/18 1/30/18 Franklin, PA US $495
Competent Person Refresher 4/5/18 4/5/18 Franklin, PA US $495
Competent Person Refresher 7/17/18 7/17/18 Pasadena TX US $495
Competent Person Refresher 8/14/18 8/14/18 Franklin, PA US $495
Competent Person Refresher 9/11/18 9/11/18 Franklin, PA US $495
Competent Person Refresher 10/10/18 10/10/18 Pasadena TX US $495
Competent Person Refresher 11/20/18 11/20/18 Franklin, PA US $495
EM385.1 Fall Protection Training for USACE & Contractors - Refresher
(Prerequisite: Current 24-hr EM385.1 Fall Protection Training for USACE & Contractors)
(Certificate must accompany registration)
Course Title Start End Location Country Price
(per person)
EM385.1 Competent Person Refresher 3/20/18 3/20/18 Pasadena, TX US $600
EM385.1 Competent Person Refresher 5/15/18 5/15/18 Franklin, PA US $600
EM385.1 Competent Person Refresher 7/24/18 7/24/18 Franklin, PA US $600
EM385.1 Competent Person Refresher 10/2/18 10/2/18 Franklin, PA US $600
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
12
Fall Prevention & Protection Train the Trainer Prerequisite Training: 16-hr Competent Person
Course Title Start End Location Country Price
(per person)
Fall Protection Train the Trainer 3/6/18 3/9/18 Franklin, PA US $2,100
Fall Protection Train the Trainer 5/22/18 5/25/18 Pasadena TX US $2,100
Fall Protection Train the Trainer 9/11/18 9/14/18 Franklin, PA US $2,100
Fall Protection Train the Trainer 11/13/18 11/16/18 Franklin, PA US $2,100
Fall Protection Train the Trainer 11/27/18 11/30/18 Pasadena TX US $2,100
At Height Safety Courses Competent Climber participants must hold current certificate & has 90 days climbing experience documented
Course Title Start End Location Country Price
(per person)
Authorized Climber / Rescuer 2/8/2018 2/9/2018 Franklin, PA US $895
Competent Climber / Rescuer 2/8/2018 2/9/2018 Franklin, PA US $895
Authorized Climber / Rescuer 5/1/2018 5/2/2018 Franklin, PA US $895
Competent Climber / Rescuer 5/3/2018 5/3/2018 Franklin, PA US $895
Fall Protection Basic Rescue 3/13/18 3/14/18 Franklin, PA US $975
Authorized Climber / Rescuer 6/19/2018 6/20/2018 Pasadena TX US $895
Competent Tower Climber / Rescuer 6/21/2018 6/21/2018 Pasadena TX US $895
Fall Protection Basic Rescue 6/5/18 6/6/18 Franklin, PA US $975
Authorized Climber / Rescuer 8/14/2018 8/15/2018 Franklin, PA US $895
Fall Protection Advanced Rescue 8/21/18 8/22/18 Franklin, PA US $1,075
Competent Tower Climber / Rescuer 11/6/2018 11/7/2018 Franklin, PA US $895
Confined Space Courses
Confined Space Entry Price
Confined Space Rescue Price
Train the Trainer Price Location Country
Start End Start End Start End
2/27/18 2/28/18 $925 3/1/18 3/1/18 $550 3/2/18 3/2/18 $800 Pasadena TX US
5/8/18 5/9/18 $925 5/10/18 5/10/18 $550 5/11/18 5/11/18 $800 Franklin, PA US
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
13
Oil & Gas Courses
Course Title Start End Location Country Price
(per person)
Oil & Gas Aware IADC RigPass 3/6/18 3/6/18 Pasadena TX US $245
Oil & Gas Aware IADC RigPass 6/29/18 6/29/18 Pasadena TX US $245
Oil & Gas Aware IADC RigPass 11/16/18 11/16/18 Pasadena TX US $245
OSHA Courses
Course Title Start End Location Country Price
(per person)
OSHA 30 Hour General Industry 3/20/18 3/23/18 Franklin, PA US $695
OSHA Residential FP (Fall Protection) 5/8/18 5/8/18 Pasadena TX US $595
OSHA Residential FP (Fall Protection) 6/22/18 6/22/18 Pasadena TX US $595
OSHA Residential FP (Fall Protection) 7/30/18 7/30/18 Pasadena TX US $595
OSHA 10 Hour General Industry 8/14/18 8/15/18 Franklin, PA US $295
OSHA 30 Hour Construction 8/21/18 8/24/18 Franklin, PA US $695
OSHA 10 Hour Construction 11/6/18 11/6/18 Franklin, PA US $295
OSHA Residential FP (Fall Protection) 11/15/18 11/15/18 Pasadena TX US $595
Wind Energy Courses
Course Title Start End Location Country Price
(per person)
Wind Energy 8 Hour Basic Height Safety 5/30/18 5/30/18 Pasadena TX US $675
Wind Energy Competent Climber 10/23/18 10/24/18 Pasadena TX US $1,025
Wind Energy Competent Climber 12/5/18 12/6/18 Franklin, PA US $1,025
6/5/18 6/6/18 $925 6/7/18 6/7/18 $550 6/8/18 6/8/18 $800 Pasadena TX US
7/31/18 8/1/18 $925 8/2/18 8/2/18 $550 8/3/18 8/3/18 $800 Pasadena TX US
8/7/18 8/8/18 $925 8/9/18 8/9/18 $550 8/10/18 8/10/18 $800 Franklin, PA US
12/11/18 12/12/18 $925 12/13/18 12/13/18 $550 12/14/18 12/14/18 $800 Franklin, PA US
12/11/18 12/12/18 $925 12/13/18 12/13/18 $550 12/14/18 12/14/18 $800 Pasadena TX US
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
14
Self-Contained Breathing Apparatus (SCBA)
and Supplied-Air Respirator (SAR)
SCBA Panther Price
SCBA Recertification Price
Titan Price Location Country
Start End Start End Start End
2/6/18 2/7/18 $350 2/7/18 2/7/18 $195 2/8/18 2/9/18 $395 Santa Ana, CA US
3/13/18 3/14/18 $350 3/13/18 3/13/18 $195 3/15/18 3/16/18 $395 Columbus, OH US
4/3/18 4/4/18 $350 4/4/18 4/4/18 $195 4/5/18 4/6/18 $395 Santa Ana, CA US
4/3/18 4/4/18 $350 4/4/18 4/4/18 $195 4/5/18 4/6/18 $395 Franklin, PA US
5/8/18 5/9/18 $350 5/8/18 5/8/18 $195 5/10/18 5/11/18 $395 Pasadena TX US
6/5/18 6/6/18 $350 6/6/18 6/6/18 $195 6/7/18 6/8/18 $395 Santa Ana, CA US
7/17/18 7/18/18 $350 7/17/18 7/17/18 $195 7/19/18 7/20/18 $395 Pasadena TX US
8/7/18 8/8/18 $350 8/8/18 8/8/18 $195 8/9/18 8/10/18 $395 Santa Ana, CA US
9/11/18 9/12/18 $350 9/11/18 9/11/18 $195 9/13/18 9/14/18 $395 Franklin, PA US
10/2/18 10/3/18 $350 10/3/18 10/3/18 $195 10/4/18 10/5/18 $395 Santa Ana, CA US
11/6/18 11/7/18 $350 11/6/18 11/6/18 $195 11/8/18 11/9/18 $395 Pasadena TX US
12/4/18 12/5/18 $350 12/5/18 12/5/18 $195 12/6/18 12/7/18 $395 Santa Ana, CA US
12/11/18 12/12/18 $350 12/11/18 12/11/18 $195 12/13/18 12/14/18 $395 Columbus, OH US
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
15
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
16
FALL PROTECTION TRAINING
End-User Fall Protection
This 8-hr course provides the participants with a general understanding of the fundamentals of fall protection; regulations that
apply to fall protection; methods of eliminating fall hazards; equipment specifications, care, use, limitations and inspection; and
fall protection planning requirement and importance. Through a combination of lectures and practical exercises, students are
exposed to best practice instructions on the use, limitations, care and maintenance of fall protection. This course includes
regulatory or provincial standards.
Course Length: 8 hours Time: 8 a.m. to 5 p.m. Call for cost: 855.565.6722
Qualified Person
This two-day intermediate level course is designed for a variety of industries and can be customized to suit the needs of the
work environment. This course contains a combination of lectures, practical activities and knowledge verifications. Program
content includes but is not limited to covering competency, due diligence, applicable Canadian and Provincial legislation and
standards, CSA, with an overview of OSHA and ANSI. The course also supplies the participant with the knowledge and skills
to perform equipment inspections.
Course Length: 16 hours Time: 8 a.m. to 5 p.m. Cost: $850 per participant*
Qualified Inspector of Fall Protection Equipment
This one-day course is designed to provide the participants with the inspection criteria as per CSA, ANSI and the applicable
regulatory body. Tools that will aid the inspector in the successful development, implementation and maintenance of a
documented and scheduled fall protection inspection program in the workplace will also be provided. This course is delivered
through a combination of instructor led presentation, hands on practical activities and theory or knowledge verifications.
Prerequisite: Honeywell Fall Protection Qualified Person
Course Length: 8 hours Time: 8 a.m. to 5 p.m. Cost: $550 per participant*
* Order and attend both Qualified Person and Qualified Inspector of Fall Protection
Equipment on consecutive days to be eligible for a discount.
Fall Protection Train the Trainer
This four-day course is designed to provide participants with tools as an instructor to design and deliver fall protection course
materials. Instructing is a unique skill set and requires confidence, organization, subject knowledge and content. The Trainer
provides insight on how adults learn, process, and use information. The course combines activities, participant presentations
and knowledge verifications. Fall Protection Train the Trainer provides a complete instructor package that includes Qualified
Person and Qualified Inspector of Fall Protection Equipment.
Course Length: 4 days Time: 8 a.m. to 5 p.m. Cost: $2,100 per participant
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
17
Working at Heights Fall Protection Ministry of Labour Approved Program for Ontario
This one-day course is designed for workers who may perform construction related activities and at times be required to work at heights where
fall protection is required. The program provides workers and supervisors with the necessary knowledge required to safely work at heights and
prevent fall related accidents. This program is compliant with Ontario regulation 213/91 section 26 and meets all requirements of both the New
Working at Heights Program Standard and Training Provider Standard.
Course Length: 1 day Time: 8 a.m. to 5 p.m. Cost: $185 per participant
Working at Heights Fall Protection Refresher Ministry of Labour Approved Program for Ontario
This half-day course is designed for workers who already hold the original 8-hr working at heights certificate. Certificate must
be accompany registration.
Course Length: 1/2 day Time: 8 a.m. to 12:00 p.m. or 12:30 p.m. – 4:30 p.m. Cost: $145 per participant
OIL SANDS SAFETY ASSOCIATION (OSSA) TRAINING
Oil Sands Safety Association (OSSA) approved training programs meet the required safety standards to help create an
“incident-free” workforce.
OSSA Fall Protection
This 8-hr course provides the participants with a general understanding of the fundamentals of fall protection, regulations that
apply to fall protection, methods of eliminating fall hazards, equipment specifications, care, use, limitations, inspection, fall
protection planning requirements and importance. The course consists of a combination of lectures, practical exercises, group
activities and knowledge verifications.
Course Length: 8 hours / 4-days (Train the Trainer) Time: 8 a.m. to 5 p.m. Call Office for details: 855.565.6722
OSSA Elevated Work Platform
This 8-hr course provides participants with the knowledge and general understanding of the legislative standards, preoperative
checks, machine selection and safe operation of Elevated Work Platform (EWP) equipment. Through a combination of lectures
and practical exercises participants are exposed to best practice instructions on the use, limitations, care and maintenance of
EWPs. This course includes regulatory and provincial standards.
Prerequisite: OSSA Fall Protection
Course Length: 8 hours / 2-days (Train the Trainer) Time: 8 a.m. to 5 p.m. Call Office for details: 855.565.6722
OSSA Confined Space Entry and Monitor
This 6-8 hr. course is designed to ensure that all participants demonstrate the basic knowledge and proficiency in the
classification and identification of hazards associated with working in confined spaces and the identification of restricted
spaces. Workers required to enter a confined or restricted space must be trained in the recognition of the risks and hazards
associated with confined or restricted space entry and monitoring, and understand the methods of controlling these associated
risks and hazards.
Course Length: 6-8 hours / 2-days (Train the Trainer) Time: 8 a.m. to 5 p.m. Call Office for details: 855.565.6722
OSSA Fire Watch
This 4-6 hr. course is designed to ensure that all participants demonstrate basic knowledge and proficiency in the classification
and identification of types of fires and extinguishers. Participants must also demonstrate knowledge of the care, use and
limitations of a fire extinguisher.
Course Length: 4-6 hours / 2-days (Train the Trainer) Time: 8 a.m. to 3 p.m. Call Office for details: 855.565.6722
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
18
OSSA TRAIN THE TRAINER
OSSA Fall Protection Train the Trainer
This course is designed for instructors required to provide fall protection training and is a combination of Qualified Person Fall
Protection, Qualified Inspector of Fall Protection Equipment and Fall Protection Train the Trainer. Instructors will be taught a
general understanding of the fundamentals of fall protection; regulations that apply to fall protection; methods of eliminating fall
hazards; equipment specifications, care, use, limitations and inspection; and fall protection planning requirements and
importance. Instructing is a unique skill set and requires confidence, organization, subject knowledge and content
familiarization. This course provides insight on how adults learn, process and use information through instructor lead
presentations, group activities, participant presentations and knowledge verifications. Participants will be provided with tools as
an instructor to deliver course materials through a combination of Train the Trainer, instructor guides, co-teach and
observation sessions.
Course Length: 4 days (32 hrs.) Time: 8 a.m. to 5 p.m. Cost: $2,100 per participant
OSSA Elevated Work Platform Train the Trainer
This course is designed for instructors required to provide elevated work platform training and includes subject matters
covered in OSSA Fall Protection. Instructors will be taught the theory behind the legislative standards, preoperative checks,
machine selection and safe operation of Elevated Work Platform (EWP) equipment. Through a combination of lectures and
practical exercises, instructors are exposed to best practices on the use, limitations, care and maintenance of EWPs. This
course includes regulatory and provincial standards. Instructing is a unique skill set and requires confidence, organization,
subject knowledge and content familiarization. This course provides insight on how adults learn, process and use information
through instructor lead presentations, group activities, participant presentations and knowledge verifications. Participants will
be provided with tools as an instructor to deliver course materials through a combination of Train the Trainer, instructor guides,
co-teach and observation sessions.
Course Length: 2 days (16 hrs.) Time: 8 a.m. to 5 p.m. Call Office for details: 855.565.6722
OSSA Confined Space Entry and Monitor Train the Trainer
This course is designed for instructors who are required to provide confined space entry and monitor training. Instructors will
be trained to recognize the risks and hazards associated with confined spaces and the methods of controlling them.
Additionally, classification of confined space, legislation, standards and code of practice will also be learned. Instructing is a
unique skill set and requires confidence, organization, subject knowledge and content familiarization. This course provides
insight on how adults learn, process and use information through instructor lead presentations, group activities, participant
presentations and knowledge verifications. Participants will be provided with tools as an instructor to deliver course materials
through a combination of Train the Trainer, instructor guides, co-teach and observation sessions.
Course Length: 2-days (16 hrs.) Time: 8 a.m. to 5 p.m. Call Office for details: 855.565.6722
OSSA Fire Watch Train the Trainer
This course is designed for instructors required to provide fire watch training and includes knowledge and proficiency in the
classification and identification of types of fires and extinguishers. Instructors will be required to demonstrate their knowledge
of the care, use and limitations of a fire extinguisher. Through a combination of lectures and practical exercises, instructors are
exposed to best practices, regulations and standards, including Alberta Occupational Health and Safety, Alberta Fire Code
and National Fire Protection Agency. Instructing is a unique skill set and requires confidence, organization, subject knowledge
and content familiarization. This course provides insight on how adults learn, process and use information through instructor
lead presentations, group activities, participant presentations and knowledge verifications. Participants will be provided with
tools as an instructor to deliver course materials through a combination of Train the Trainer, instructor guides, co-teach and
observation sessions.
Course Length: 2-days (16 hrs.) Time: 8 a.m. to 5 p.m. Call Office for details: 855.565.6722
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
19
ON-SITE TRAINING AT YOUR FACILITY OR WORKPLACE
On-Site Training
Honeywell is the leading provider of on-site training options, conveniently held at your facility or work-site. Schedule one of our
instructors to work with your employees in their own environment.
Basic Requirements
Training or meeting room to adequately accommodate the expected number of participants, with ample room for
practical activities if applicable.
Flip chart or white board, markers (Honeywell can supply if not available)
Projector (Honeywell can supply if not available)
Projector screen or white wall (Honeywell can supply if not available)
Dedicated table to instructor equipment and materials
Electrical outlets for equipment
Elevated Work Platform equipment in good working order (if applicable)
Any additional requirements will be addressed at the time of booking.
To learn more about scheduling a trainer to work with your
employees in their own environment please call 855.565.6722
or email CanadaSafetyTraining@Honeywell.com
Fall Protection Qualified Person, Qualified Inspector and Train the Trainer Courses
Qualified Person Price (2 days)
Qualified Inspector Price
(3 days)
Train the Trainer Price
(4 days) Location Country
Start End Start End Start End
1/16/18 1/17/18 $850 1/18/18 1/18/18 $1000 1/19/18 1/19/18 $2100 Edmonton, AB Canada
1/23/18 1/24/18 $850 1/25/18 1/25/18 $1000 1/26/18 1/26/18 $2100 Woodbridge,
ON Canada
2/20/18 2/21/18 $850 2/22/18 2/22/18 $1000 2/23/18 2/23/18 $2100 Woodbridge,
ON Canada
3/6/18 3/7/18 $850 3/8/18 3/8/18 $1000 3/9/18 3/9/18 $2100 Montreal, QC
(French) Canada
3/13/18 3/14/18 $850 3/15/18 3/15/18 $1000 3/16/18 3/16/18 $2100 Edmonton, AB Canada
3/20/18 3/21/18 $850 3/22/18 3/22/18 $1000 3/23/18 3/23/18 $2100 Woodbridge,
ON Canada
4/17/18 4/18/18 $850 4/19/18 4/19/18 $1000 4/20/18 4/20/18 $2100 Edmonton, AB Canada
5/15/18 5/16/18 $850 5/17/18 5/17/18 $1000 5/18/18 5/18/18 $2100 Calgary, AB Canada
5/15/18 5/16/18 $850 5/17/18 5/17/18 $1000 5/18/18 5/18/18 $2100 Vancouver, BC Canada
6/5/18 6/6/18 $850 6/7/18 6/7/18 $1000 6/8/18 6/8/18 $2100 Montreal, QC
(French) Canada
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
20
Working at Heights
(MOL approved – Ontario only)
Course Title Start End Location Country Price
(per person)
Working at Heights (MOL approved) 1/9/18 1/9/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 1/25/18 1/25/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 1/17/18 1/17/18 Mississauga. ON Canada $185
Working at Heights (MOL approved) 2/1/18 2/1/18 Vaughan, ON Canada $185
Working at Heights (MOL approved) 2/8/18 2/8/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 2/15/18 2/15/18 Mississauga, ON Canada $185
Working at Heights (MOL approved) 2/27/18 2/27/18 Scarborough, ON Canada $185
Working at Heights (MOL approved) 3/7/18 3/7/18 Vaughan, ON Canada $185
6/12/18 6/13/18 $850 6/14/18 6/14/18 $1000 6/15/18 6/15/18 $2100 Edmonton, AB Canada
7/17/18 7/18/18 $850 7/19/18 7/19/18 $1000 7/20/18 7/20/18 $2100 Edmonton, AB Canada
7/24/18 7/25/18 $850 7/26/18 7/26/18 $1000 7/27/18 7/27/18 $2100 Woodbridge,
ON Canada
8/14/18 8/15/18 $850 8/16/18 8/16/18 $1000 8/17/18 8/17/18 $2100 Calgary, AB Canada
8/14/18 8/15/18 $850 8/16/18 8/16/18 $1000 8/17/18 8/17/18 $2100 Vancouver, BC Canada
8/21/18 8/22/18 $850 8/23/18 8/23/18 $1000 8/24/18 8/24/18 $2100 Woodbridge,
ON Canada
9/4/18 9/5/18 $850 9/6/18 9/6/18 $1000 9/7/18 9/7/18 $2100 Montreal, QC Canada
9/11/18 9/12/18 $850 9/13/18 9/13/18 $1000 9/14/18 9/14/18 $2100 Edmonton, AB Canada
9/18/18 9/19/18 $850 9/20/18 9/20/18 $1000 9/21/18 9/21/18 $2100 Woodbridge,
ON Canada
10/16/18 10/17/18 $850 10/18/18 10/18/18 $1000 10/19/18 10/19/18 $2100 Edmonton, AB Canada
10/23/18 10/24/18 $850 10/25/18 10/25/18 $1000 10/26/18 10/26/18 $2100 Woodbridge,
ON Canada
11/13/18 11/14/18 $850 11/15/18 11/15/18 $1000 11/16/18 11/16/18 $2100 Calgary, AB Canada
11/13/18 11/14/18 $850 11/15/18 11/15/18 $1000 11/16/18 11/16/18 $2100 Vancouver, BC Canada
11/20/18 11/21/18 $850 11/22/18 11/22/18 $1000 11/23/18 11/23/18 $2100 Woodbridge,
ON Canada
12/4/18 12/5/18 $850 12/6/18 12/6/18 $1000 12/7/18 12/7/18 $2100 Montreal, QC
(French) Canada
12/11/18 12/12/18 $850 12/13/18 12/13/18 $1000 12/14/18 12/14/18 $2100 Edmonton, AB Canada
12/18/18 12/19/18 $850 12/20/18 12/20/18 $1000 12/21/18 12/21/18 $2100 Woodbridge,
ON Canada
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
21
Course Title Start End Location Country Price
(per person)
Working at Heights (MOL approved) 3/13/18 3/13/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 3/22/18 3/22/18 Mississauga Canada $185
Working at Heights (MOL approved) 3/28/18 3/28/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 4/5/18 4/5/18 Vaughan, ON Canada $185
Working at Heights (MOL approved) 4/17/18 4/17/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 4/24/18 4/24/18 Mississauga, ON Canada $185
Working at Heights (MOL approved) 5/2/18 5/2/18 Vaughan, ON Canada $185
Working at Heights (MOL approved) 5/9/18 5/9/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 5/17/18 5/17/18 Mississauga, ON Canada $185
Working at Heights (MOL approved) 5/29/18 5/29/18 Scarborough, ON Canada $185
Working at Heights (MOL approved) 6/6/18 6/6/18 Vaughan, ON Canada $185
Working at Heights (MOL approved) 6/13/18 6/13/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 6/21/18 6/21/18 Mississauga, ON Canada $185
Working at Heights (MOL approved) 7/11/18 7/11/18 Vaughan, ON Canada $185
Working at Heights (MOL approved) 7/19/18 7/19/18 Scarborough, ON Canada $185
Working at Heights (MOL approved) 7/25/18 7/25/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 7/26/18 7/26/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 8/1/18 8/1/18 Mississauga, ON Canada $185
Working at Heights (MOL approved) 8/14/18 8/14/18 Vaughan, ON Canada $185
Working at Heights (MOL approved) 8/23/18 8/23/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 9/5/18 9/5/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 9/13/18 9/13/18 Scarborough, ON Canada $185
Working at Heights (MOL approved) 9/20/18 9/20/18 Mississauga, ON Canada $185
Working at Heights (MOL approved) 9/26/18 9/26/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 10/4/18 10/4/18 Vaughan, ON Canada
$185
Working at Heights (MOL approved) 10/16/18 10/16/18 Bolton, ON Canada
$185
Working at Heights (MOL approved) 10/24/18 10/24/18 Mississauga, ON Canada
$185
Working at Heights (MOL approved) 11/1/18 11/1/18 Vaughan, ON Canada
$185
Working at Heights (MOL approved) 11/14/18 11/14/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 11/20/18 11/20/18 Mississauga, ON Canada $185
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
22
Course Title Start End Location Country Price
(per person)
Working at Heights (MOL approved) 11/29/18 11/29/18 Bolton, ON Canada $185
Working at Heights (MOL approved) 12/4/18 12/4/18 Vaughan, ON Canada $185
Working at Heights (MOL approved) 12/12/18 12/12/18 Bolton, ON Canada $185
Working at Heights Refresher
(MOL approved – Ontario only)
Course Title Start End Location Country Price
(per person)
Working at Heights Refresher (MOL approved) 4/11/18 4/11/18 Scarborough, ON Canada $145
Working at Heights Refresher (MOL approved) 4/12/18 4/12/18 Mississauga, ON Canada $145
Working at Heights Refresher (MOL approved) 4/18/18 4/18/18 Bolton, ON Canada $145
Working at Heights Refresher (MOL approved) 4/26/18 4/26/18 Vaughan, ON Canada $145
Working at Heights Refresher (MOL approved) 5/8/18 5/8/18 Bolton, ON Canada $145
Working at Heights Refresher (MOL approved) 5/24/18 5/24/18 Bolton, ON Canada $145
Working at Heights Refresher (MOL approved) 6/5/18 6/5/18 Mississauga, ON Canada $145
Working at Heights Refresher (MOL approved) 6/20/18 6/20/18 Vaughan, ON Canada $145
Working at Heights Refresher (MOL approved) 7/5/18 7/5/18 Bolton, ON Canada $145
Working at Heights Refresher (MOL approved) 7/17/18 7/17/18 Mississauga, ON Canada $145
Working at Heights Refresher (MOL approved) 8/2/18 8/2/18 Bolton, ON Canada $145
Working at Heights Refresher (MOL approved) 8/15/18 8/15/18 Bolton, ON Canada $145
Working at Heights Refresher (MOL approved) 8/28/18 8/28/18 Bolton, ON Canada $145
Working at Heights Refresher (MOL approved) 9/11/18 9/11/18 Vaughan, ON Canada $145
Working at Heights Refresher (MOL approved) 9/27/18 9/27/18 Bolton, ON Canada $145
Working at Heights Refresher (MOL approved) 10/11/18 10/11/18 Scarborough, ON Canada $145
Working at Heights Refresher (MOL approved) 10/23/18 10/23/18 Bolton, ON Canada $145
Working at Heights Refresher (MOL approved) 11/6/18 11/6/18 Scarborough, ON Canada $145
Working at Heights Refresher (MOL approved) 11/8/18 11/8/18 Mississauga, ON Canada $145
Working at Heights Refresher (MOL approved) 11/21/18 11/21/18 Bolton, ON Canada $145
Working at Heights Refresher (MOL approved) 12/5/18 12/5/18 Mississauga, ON Canada $145
Learn more! Online: Telephone: Email: In the U.S.: In Canada:
honeywellsafety.com/usa/training honeywellsafety.com/ca/training
855.565.6722 855.565.6722
HoneywellSafetyTraining@Honeywell.com CanadaSafetyTraining@Honeywell.com
Honeywell Internal
23
Oil Sands Safety Association (OSSA) Courses
Fall Protection Train the Trainer
Course Title Start End Location Country Price
(p person)
OSSA Fall Protection Train the Trainer 1/16/18 1/19/18 Edmonton, AB Canada $2100
OSSA Fall Protection Train the Trainer 3/13/18 3/16/18 Edmonton, AB Canada $2100
OSSA Fall Protection Train the Trainer 4/17/18 4/20/18 Edmonton, AB Canada $2100
OSSA Fall Protection Train the Trainer 6/12/18 6/15/18 Edmonton, AB Canada $2100
OSSA Fall Protection Train the Trainer 7/17/18 7/20/18 Edmonton, AB Canada $2100
OSSA Fall Protection Train the Trainer 9/11/18 9/14/18 Edmonton, AB Canada $2100
OSSA Fall Protection Train the Trainer 10/16/18 10/19/18 Edmonton, AB Canada $2100
OSSA Fall Protection Train the Trainer 12/11/18 12/14/18 Edmonton, AB Canada $2100