Post on 09-Apr-2022
HM, HMC, HMNHorizontal Multistage
Centrifugal Pump, 60Hz
Approvals
René WasmerPresident of IQNet
Theodor ZahnerManaging Director SQS
CERTIFICATEIQNet and SQS
hereby certify that the organization
Certified area
Field of activity
has implemented and maintains a
Management Systemwhich fulfills the requirements of the following standard
ISO 9001:2008Scope No: 29
Issued on: 2008-12-20Validity date: 2011-12-19
Registration Number: CH-32160
Whole company
Swiss Pump Company AGCH-3645 Thun-Gwatt
Pumps- and Controlsystems
IQNet Partners*:AENOR Spain AFNOR Certification France AIB-Vinçotte International Belgium ANCE Mexico APCER Portugal CISQ Italy CQC China
CQM China CQS Czech Republic Cro Cert Croatia DQS Holding GmbH Germany DS Denmark ELOT Greece FCAV Brazil FONDONORMA Venezuela HKQAA Hong Kong China ICONTEC Colombia IMNC Mexico Inspecta Certification Finland IRAM Argentina
JQA Japan KFQ Korea MSZT Hungary Nemko AS Norway NSAI Ireland PCBC Poland Quality Austria Austria RR Russia SII Israel SIQ Slovenia SIRIM QAS International Malaysia SQS Switzerland SRAC Romania TEST St Petersburg Russia TSE Turkey YUQS Serbia
IQNet is represented in the USA by: AFNOR Certification, CISQ, DQS Holding GmbH and NSAI Inc.* The list of IQNet partners is valid at the time of issue of this certificate. Updated information is available under www.iqnet-certification.com
3
General Data
Performance range page 4
Application 5
Pump 5
Operating conditions 5
Pipe connections 5
Definition of model 6
Mechanical seal 7
Material HM 8
Material HMC, HMN 8
Section drawing 9
Technical DataHM 2 page 10
HM 4 11
HM 8 12
HM 12 13
HMC / HMN 2 14
HMC / HMN 4 15
HMC 8 16
HMC 12 17
Gen
eral
Dat
a
4
Performance range
5
Applications
• Domestic
• Liquid transfer and circulation of liqueds within light industry and farming
• Pressure boosting
• Air-conditionning system
• Cooling system or cooling machine
• Specialized OEM equipment
PumpThe HMC and HMN series are non-self priming, horizontal multistage cenrifugal pumps. pumps is coupled with motor at the same shaft and mounted on a base- plate. The friendly design makes the pump suitable for installation in the small domestic or industrial water supply system. The pump is fitted with a mechanical seal and through going pump motor shaft.
HMC: The dicharge and suction chamber are made of cast iron. The other parts of pump in contact with the liquid are made of stainless steel.
HMN: All parts of pump in contact with the liquid are made of stainless steel. EPDM or viton O-rings are available as standard.
Pipe connections
Operating conditionsLiquid: Clean liquid without solid particles.
Liquid temprature range: 0 C ~ +110 C .
Maximum ambient temperature: +50C .
The maximum operating pressure depends on the temperature of the pumped liquid.
Min.inlet pressure: According to the NPSH curve + a safety margin of 0.5m .
Max. inlet pressure: Limited by the max. operating pressure .
Liquids to be pumpedThese pumps are designed for pumping freely flowing non-corrosive, non-explosive. and non-flammable liquids. The liquids to be pumped must also be free of solid matter, sands, flibers, and similar materials.
Most common non-highly corrosive watery liquids, oily liquids, hot and cold liquids can be pumped with these pumps.
The suitability of these pumps for pumping any particular liquid depends upon a number of factors, such as the ph value, contents of chemicals such as chlorides, oils, the temperature of the liquids, etc.
Please contact your distributor or the factory if there are any questions as to whether certain liquids are suitable for pumping with these pumps.
Max. Operating Pressure 10 kg/cm2 6 kg/cm2
HM 2,4,8,12 0°C to +110 °C
HMC(N)2, HMC(N)4 0°C to +40°C +41°C to +90°C
HMC 8, HMC 12 0°C to +55°C +56°C to +90°C
Connection HM 2 HM 4 HM 8 HM 12 HMC(N) 2 HMC(N) 4 HMC 8 HMC 12
Suction Port Rp 1 Rp 1 1/4 Rp 1 1/2 Rp 1 1/2 Rp 1 Rp 1 1/4 Rp 1 1/2 Rp 1 1/2
Discharge Port Rp 1 Rp 1 1/4 Rp 1 1/2 Rp 1 1/2 Rp 1 Rp 1 Rp 1 1/4 Rp 1 1/2
Drain hole, Priming Hole G 3/8 G 3/8 G 3/8 G 3/8 Rc 3/8 Rc 3/8 Rp 1/2 Rp 1/2
Gen
eral
Dat
a
6
Definition of Model
Electric MotorThe pump is fitted with a totally enclosed, fan-cooled, squirrel-cage motor.
Rated speed: 3450 rpm (60Hz)
Enclosure class: IP 54
Insulation class: F
Standard voltage: 1 x 110 ~ 220 V, 60Hz
3 x 200 ~ 230 V/346 ~ 400Y V, 60Hz
HMN Example
HMC Example
HM 4 - 30 - CQBE
Mechanical seals
Stage x10
Rated flow m3/h
Pump type
HM 4 - 30 - CQBE
Mechanical seals
Stage x10
Rated flow m3/h
Pump type
HM 4 - 30 - CQBE
Mechanical seals
Stage x10
Rated flow m3/h
Pump type
HM Example
HMN
HMC
RQQE
7
Mechanical seal HMC , HMN
Mechanical seals HM
• Standard.
• Standard.
Gen
eral
Dat
a
8
Material HMC, HMN
HMC HMN1 Suction chamber Cast iron SS3042 Pump head Cast iron SS3043 Intermediate chamber SS304 SS3044 Impeller SS304 SS3045 Spacing pipe SS304 SS3046 Shaft SS431 SS4317 Mechanical seal Silicon carbide / Carbon Silicon carbide / Carbon8 O-ring EPDM or Viton EPDM or Viton9 Drain and priming plug Steel SS304
10 Base plate Steel SS304
MaterialsDescriptionNo.
Material HM
HM 304 HM 3161 Pump casing SS304 SS3162 Suction inter-connector SS304 SS3163 Chamber SS304 SS3164 Impeller SS304 SS3165 Cover plate SS304 SS3166 Shaft SS431 SS3167 Mechanical seal Silicon carbide / Carbon Silicon carbide / Carbon8 O-ring EPDM or Viton EPDM or Viton9 Base plate Steel Steel
MaterialsDescriptionNo.
9
HMC , HMN
Section drawing
HM
Tech
nic
al D
ata
10
HM 2
Performance Curves
Dimensional Sketches
Dimensions and weights
Electrical data, 3450 min-1
P1 [W] I 1/1 [A] P1 [W] I 1/1 [A]
HM 2-10 450 3.4 / 1.7 380 1.5 / 0.9
HM 2-20 620 5.2 / 2.6 560 2.8 / 1.6
HM 2-30 800 7 / 3.5 780 3.2 / 1.8
HM 2-40 1020 9.4 / 4.7 1020 3.5 / 2
HM 2-50 1200 11 / 5.5 1120 3.8 / 2.2
HM 2-60 1420 13 / 6.5 1260 4.5 / 2.6
Pump type1 x 110-220 V 3 x 200-230/346-400 V
L1 H L1 H
HM 2-10 403 255 403 233
HM 2-20 403 255 403 233
HM 2-30 403 255 403 233
HM 2-40 403 255 403 233
HM 2-50 441 255 441 233
HM 2-60 441 255 441 233
1-Phase 3-Phase
9.5
Net Weight (kg)Pump type
Dimension (mm)
9.5
9.8
10.3
11.7
12
11
HM 4 4
Performance Curves
Dimensional Sketches
Dimensions and weights
Electrical data, 3450 min-1
P1 [W] I 1/1 [A] P1 [W] I 1/1 [A]
HM 4-10 520 5.4 / 2.7 530 2.7 / 1.6
HM 4-20 890 9.2 / 4.6 890 3.3 / 1.9
HM 4-30 1280 13 / 6.5 1210 4.4 / 2.5
HM 4-40 1680 16-Aug 1620 6 / 3.5
HM 4-50 2080 21 / 10.5 1830 6.8 / 3.9
Pump type1 x 110-220 V 3 x 200-230/346-400 V
L1 H L1 H
HM 4-10 403 255 403 233
HM 4-20 403 255 403 233
HM 4-30 403 255 403 233
HM 4-40 441 255 441 233
HM 4-50 441 255 441 233
Pump type
Dimension (mm)
1-Phase 3-PhaseNet Weight (kg)
9.5
10.1
9.5
12.8
11.5
Tech
nic
al D
ata
12
HM 8
Performance Curves
Dimensional Sketches
Dimensions and weights
Electrical data, 2850 min-1
13
HM 12
Performance Curves
Dimensional Sketches
Dimensions and weights
Electrical data, 2850 min-1
Tech
nic
al D
ata
14
HMC 2, HMN 2C 2, HMN 2
Performance Curves
Dimensional Sketches
Dimensions and weights
Electrical data, 3450 min-1
P1 [W] I 1/1 [A] P1 [W] I 1/1 [A]
HMC/HMN 2-20 640 6 / 3 520 2.7 / 1.6
HMC/HMN 2-30 780 7.6 / 3.8 690 3 / 1.8
HMC/HMN 2-40 870 8.8 / 4.4 860 3.2 / 1.9
HMC/HMN 2-50 1210 11 / 5.5 1090 3.6 / 2.1
HMC/HMN 2-60 1280 13.5 / 6.8 1240 4.1 / 2.4
Pump type1 x 110-220 V 3 x 200-230/346-400 V
1-phase 3-phase 1-phase 3-phase 1-phase 3-phaseHMC 2-20 309 75 63 101 141 127 112 228 206 10.3 10
HMC 2-30 327 93 81 119 141 127 112 228 206 11.1 10.8
HMC 2-40 345 111 99 137 141 127 112 228 206 11.3 11.1
HMC 2-50 403 129 117 155 141 127 112 228 206 13 12.4
HMC 2-60 421 147 135 173 141 127 112 228 206 13.2 12.7
kgH
mmB2
L1 L2 L3 L4 B1Pump type
1-phase 3-phase 1-phase 3-phase 1-phase 3-phaseHMN 2-20 309 75 63 101 141 127 112 228 206 9.1 8.8
HMN 2-30 327 93 81 119 141 127 112 228 206 10 9.6
HMN 2-40 345 111 99 137 141 127 112 228 206 10.2 10
HMN 2-50 403 129 117 155 141 127 112 228 206 11.8 11.5
HB2mm
kgL1 L2 L3
Pump typeL4 B1
15
Performance Curves
Dimensional Sketches
Dimensions and weights
HMC 4, HMN 4C 4, HMN 4
P1 [W] I 1/1 [A] P1 [W] I 1/1 [A]
HMC/HMN 4-20 970 8.5 / 4.2 810 3.1 / 1.8
HMC/HMN 4-30 1450 13.5 / 6.8 1250 3.9 / 2.3
HMC/HMN 4-40 1710 16 / 8 1520 4.9 / 2.8
Pump type1 x 110-220 V 3 x 200-230/346-400 V
1-phase 3-phase 1-phase 3-phase 1-phase 3-phase
HMC 4-20 318 84 72 110 141 127 112 228 206 12.2 10.7
HMC 4-30 384 111 99 137 141 127 112 228 206 12.2 12.3
HMC 4-40 412 138 126 164 141 127 112 228 206 14 13.7
Pump type
mmkg
L1 L2 L3 L4 B1B2 H
1-phase 3-phase 1-phase 3-phase 1-phase 3-phase
HMN 2-60 421 147 135 173 141 127 112 228 206 12.1 11.7
HMN 4-20 318 84 72 110 141 127 112 228 206 9.8 9.5
HMN 4-30 384 111 99 137 141 127 112 228 206 11.5 11.1
HMN 4-40 412 138 126 164 141 127 112 228 206 12.8 12.6
Pump type
mmkg
L1 L2 L3 L4 B1B2 H
Electrical data, 3450 min-1
Tech
nic
al D
ata
16
Performance Curves
Dimensional Sketches
Dimensions and weights
HMC 8
Electrical data, 2850 min-1
17
Performance Curves
Dimensional Sketches
Dimensions and weights
HMC 12
Electrical data, 2850 min-1
Swiss Pump Company AGMoosweg 36
CH - 3645 Thun - GwattSwitzerland
Tel. +41 33 223 11 00Fax +41 33 223 11 22 mail@swisspump.com
www.swisspump.com