Post on 22-Mar-2016
description
ISO 9001 - Cert. n° 0360I/GB - 9/2007 Crema (CR)
INTERMITTORI/OSCILLATORIAD ASSI ORTOGONALI IT/OT SERIE 5INTERMITTORI/OSCILLATORI VELOCI ITV/OTV SERIE 5
SQUARE AXISINTERMITTENT/OSCILLATINGDRIVES IT/OT SERIES 5HIGH SPEED INTERMITTENT/OSCILLATINGDRIVES ITV/OTV SERIES 5
Province di Bergamo, Brescia, Pavia, Cremona e MantovaAUTOMAZIONE INDUSTRIALE S. a. s. di A. Colpani & C.Via M. D'Azeglio, 13 - 24047 Treviglio (BG)Tel. e Fax 0363 45 026e-mail: a.colpani@tin.it
Province di Como, Lecco, Novara, Sondrio, Varese, Verbania.BIANCHINI D. & C. S.a.s.Via Novellina, 14/C - 21050 Besano (VA)Tel. 0332 916 627 - Fax 0332 916 419e-mail: info@bianchinisas.comhttp://www.bianchinisas.com
Toscana e Umbria.PAOLO BONACCORSI - RAPPRESENTANZE INDUSTRIALIVia Ebat, 31 - 57100 LivornoTel. e Fax 0586 804 257e-mail: paolobonaccorsi@tin.it
Puglia e BasilicataGIUSEPPE GENGA – RAPPRESENTANZE INDUSTRIALIVia V. Bottego, 31 – 70019 Triggiano (BA)Tel. 348 3809743 – Fax 080 4685878e-mail: geng0001@ggenga.191.it
Emilia Romagna, Marche e AbruzzoANTONIO MORUCCHIOVia Bertocchi, 55 - 40133 BolognaTel. 051 619 5543 - Fax 051 619 5543e-mail: antmoruc@tin.it
Province di Aosta, Alessandria, Asti, Biella, Cuneo, Torino, Vercelli,Genova, Imperia, La Spezia, Savona.SFERA di F. GhirelloVia Devesi, 28 - 10076 Nole (TO)Tel. 011 929 6779 - Fax 011 929 5188e-mail: sfera@icip.com
Triveneto.SIN.TEC. di p.i. Ermanno SantonVia O. Galante, 79/2 - 35132 PadovaTel. 049 775 147 - Fax 049 780 62 69e-mail: info@sinergietecniche.ithttp://www.sinergietecniche.it
Campania.VEGA AUTOMAZIONI S.a.s.Via Cairoli, 19 - 81020 S. Nicola La Strada (CE)Tel. 0823 454 468 - Fax 0823 424 788e-mail: email@vegaonline.info
I NOSTRI AGENTI IN ITALIAOUR AGENTS IN ITALY
INDICE Pag.
Caratteristiche IT/OT 2
Principio di funzionamento IT/OT 3
Stazioni e angoli di trasferimento 4
Rotazione e angoli di trasferimento 5
Senso di rotazione IT/OT 6
Riferimenti di fase IT/OT 7
Microinterruttore di fase 8Carichi esterniLati di montaggio
Dati tecnici generali 9
Esempio di calcolo oscillatore 10
Tempi di spostamento 12
Intermittore IT 10 13
Oscillatore OT 10 14
Intermittore/oscillatore IT/OT 15 15
Intermittore/oscillatore IT/OT 25 16
Intermittore/oscillatore IT/OT 35 17
Intermittore/oscillatore IT/OT 55 18
Intermittore/oscillatore IT/OT 75 19
Dimensioni di camma e micro di fase 20
Posizione di lavoro IT/OT 21Posizione di montaggio unita motrice
Esempi di assemblaggio con unita motrici 22
Intermittori / oscillatori veloci 23
Intermittore/oscillatore veloce ITV/OTV 10 24
Intermittore/oscillatore veloce ITV/OTV 15 25
Intermittore/oscillatore veloce ITV/OTV 25 26
Intermittore/oscillatore veloce ITV/OTV 35 27
Intermittore/oscillatore veloce ITV/OTV 55 28
Intermittore/oscillatore veloce ITV/OTV 75 29
INDEX Page
Features IT/OT 2
IT/OT operating principle 3
Index number and cam transfer angles 4
Rotation and cam transfer angles 5
IT/OT rotation direction 6
IT/OT referring to set point 7
Set microswitch 8External loadsMounting sides
Technical data 9
Oscillator calculation example 11
Index time 12
IT 10 intermittent drive 13
OT 10 oscillating drive 14
IT 15 / OT 15 intermittent/oscillating drive 15
IT 25/OT 25 intermittent/oscillating drive 16
IT 35 / OT 35 intermittent/oscillating drive 17
IT 55 / OT 55 intermittent/oscillating drive 18
IT 75 / OT 75 intermittent/oscillating drive 19
Overal dimensions of cam/set microswitch 20
IT/OT operating position 21IT/OT power drive units assembling position
Assembling examples with drive units 22
High speed intermittent / oscillating drives 23
ITV/OTV 10 High speed intermittent/oscillating drive 24
ITV/OTV 15 High speed intermittent/oscillating drive 25
ITV/OTV 25 High speed intermittent/oscillating drive 26
ITV/OTV 35 High speed intermittent/oscillating drive 27
ITV/OTV 55 High speed intermittent/oscillating drive 28
ITV/OTV 75 High speed intermittent/oscillating drive 29
Intermittori-Oscillatori 1
INTERMITTORI/OSCILLATORI SERIE 5INTERMITTENT/OSCILLATING DRIVES IT/OT SERIES 5
È vietata la riproduzione anche parzialedel testo e delle illustrazioni contenute nella
presente pubblicazione.
No part of this publication may be reproduced,stored in a retrieval system, or transmitted in any form
without the prior permission of AUTOROTOR.
PROPRIETÀ LETTERARIA RISERVATA ALL RIGHTS RESERVED
Intermittent/Oscillating drives2
9
3
2
1
7
4
8
6
4 5
CARATTERISTICHE INTERMITTORE/OSCILLATOREFEATURES OF INTERMITTENT/OSCILLATING DRIVE
CAMMA IN ACCIAIO LEGATO E TRATTATOHigh tensile steel cam with hardened and ground profiles
RULLI SPECIALI - ASSORBONO RIGIDAMENTE CARICHI ELEVATISpecial cam followers - They bear high load rigidly
DISCO DIVISOREIndexing disk
ALBERI ROTANTI CON CUSCINETTI A RULLI CONICI CONTRAPPOSTIShafts rotating on opposite conical roller bearings
MOZZO CENTRALE OSCILLANTE FORATO (USCITA)Central oscillating hollow hub (outlet)
ALBERO IN ENTRATAInlet shaft
SUPERFICI PIANE Dl APPOGGIO LAVORATE A MACCHINAMachined planes for flat contact
PREDISPOSIZIONE ATTACCO DIRETTO RIDUTTOREPrearrangement for direct installation of worm gear reducer
CASSA PRISMATICA IN GHISA A TENUTA (LUBRIFICAZIONE CON GRASSO PERMANENTE)Sealed cast iron case (long life grease lubrication)
1
2
3
4
5
6
7
8
9
L'lNTERMITTORE IT serie 5 e un dispositivo meccanico adassi ortogonali che, tramite una trasmissione a camma e rulliin presa continua, trasforma il moto rotatorio uniforme del-l'albero in entrata in una rotazione intermittente ben deter-minata in uscita. II numero delle divisioni standard varia da 2a 32; a richiesta si possono ottenere fino a 540 divisioni.II profilo costruttivo della camma determina sia la rotazionedel disco con accelerazioni definite da funzioni matemati-che che la pausa per il tempo stabilito.II funzionamento viene schematizzato in fig. 1.
AUTOROTOR INTERMITTENT DRIVE IT series 5 is asquare axis mechanical device. A mechanical barrel camand followers transform the inlet shaft uniform rotation intoa predetermined intermittent rotation at the outlet.The num-ber of standard indexings ranges from 2 to 32; over 32, upto 540, on request.The cam shape makes the disk rotate with acceleration cur-ves which follow mathematical laws and dwell for the relatedpredetermined time.The operating principle is shown in pict. 1.
Intermittori-Oscillatori 3
PRINCIPIO Dl FUNZIONAMENTOOPERATING PRINCIPLE
Fig.1 - Pict. 1
INTERMITTORE ITIT INTERMITTENT DRIVE
L'OSCILLATORE OT Serie 5 è un dispositivo meccanico adassi ortogonali che, tramite una trasmissione a camma erulli in presa continua, trasforma il moto rotatorio uniformedell'albero in entrata in una oscillazione intermittente deter-minata in uscita. II profilo costruttivo della camma determinail movimento angolare della torretta con accelerazioni defi-nite da funzioni matematiche. II funzionamento viene sche-matizzato in fig. 2.
AUTOROTOR OSCILLATING drive OT series 5 is a mecha-nical square axis device. A mechanical cam with followerstransforms the inlet shaft uniform rotation into a predetermi-ned oscillation of the output turret.The oscillation angle can be up to 90°. The cam shape ge-nerates an angular displacement of the turret which followsmathematically set acceleration curves.The operation principle is shown in pict. 2.
OSCILLATORE OTOT OSCILLATING DRIVE
Fig. 2 - Pict. 2
Intermittent/Oscillating drives4
STAZIONI E ANGOLI DI TRASFERIMENTOINDEX NUMBER AND CAM TRANSFER ANGLES
IT10 IT15 IT25 IT35 IT55 IT75 2 1
IT10 IT15 IT25 IT35 3 1IT55 IT75 3 1
IT10 IT15 IT25 IT35 IT55 IT75 4 1
IT10 IT15 IT25 IT35 IT55 5 1IT75 5 1
IT10 IT15 IT25 IT35 IT55 6 1IT75 6 1
IT10 IT15 IT25 IT35 7 1IT55 IT75 7 1
IT10 IT15 IT25 IT35 8 1IT55 8 1
IT75 8 1
IT10 IT15 IT25 IT35 IT55 9 1IT75 9 1
IT10 IT15 IT25 IT35 IT55 10 1IT75 10 1
IT10 IT15 IT25 IT35 IT55 10 1
IT75 11 1
IT10 IT15 IT25 IT35 IT55 12,14,15 1IT75 12,14,15 1
IT10 IT15 16,18 2IT25 IT35 IT55 16,18 1
IT75 16,18 1
IT10 IT15 20,24 2IT25 IT35 IT55 20,24 1
IT75 20,24 1
IT10 IT15 28 2IT25 IT35 IT55 28 2
IT75 28 1
IT10 IT15 30 3IT25 IT35 IT55 30 2
IT75 30 2
IT10 IT15 32 2IT25 IT35 IT55 32 2
IT75 32 2
Angolo suggerito
Angoli standard realizzabili
Advised displacement angle
Available standard displacement angles
90 120 150 180 210 240 270 300 315 330
Stations Cam rotation angle performing the transfer movementsCamprofiles
Stazioni Angolo di camma impegnato per il movimentoProfilicamma
Fasi di ciclo Cycle phases
RotazioneRotation
A
PausaDwell
B
RotazioneRotation
C
PausaDwell
D
Intermittori-Oscillatori 5
ROTAZIONE E ANGOLI DI TRASFERIMENTOROTATION AND CAM TRANSFER ANGLES
AngolorotazioneAngular
displacement
OT15 OT25 OT35 OT55
30
4545606075759090120120150150180
135270120240105210901806012030600
4545606075759090
120120150150180
1350
1200
1050
900
600
3000
45
606075759090120120150150180
120240105210901806012030600
606075759090
120120150150180
1200
1050
900
600
3000
60
75759090120120150150180
105210901806012030600
75759090
120120150150180
1050
900
600
3000
75
120120150150180
6012030600
120120150150180
600
3000
90
120120150150180
6012030600
120120150150180
600
3000
Configurazioni standard Standard availability
Intermittent/Oscillating drives6
L'intermittore in esecuzione standard è fornito con cammaad elica destra. La rotazione oraria dell'albero in entratagenera una rotazione intermittente antioraria in uscita(vedi fig. 3).Per avere la direzione contraria e sufficiente invertire il motoall'ingresso. Con camma ad elica sinistra e rotazione ora-ria in ingresso si ha I'uscita in senso orario (vedi fig. 4).
The IT INTERMITTENT DRIVE is supplied, as a standard,with right hand cam. The clockwise rotation at the inlet istransformed into counterclockwise intermittent rotation at theoutlet. Just as well counterclockwise rotation at the inlet istransformed into clockwise intermittent rotation at the outlet.With left hand cam the clockwise rotation at the inlet is tran-sformed into intermittent clockwise rotation at the out-let.
SENSO DI ROTAZIONEROTATION DIRECTION
INTERMITTORE ITIT INTERMITTENT DRIVE
La rotazione unidirezionale della camma provoca lo sposta-mento angolare della torretta che indichiamo con corsa an-golare.Per ottenere il cicio completo è necessaria la rotazione di360° dell'albero in entrata e si distinguono Ie seguenti fasisuccessive (vedi fig. 5).
The one way cam rotation generates the angular movementof the turret.We call it angular displacement.For a complete operating cycle it is necessary a full turn(360°) of the input shaft with four phases in sequence (seepict. 5).
OSCILLATORE OTOT OSCILLATING DRIVE
Fig. 5 - Pict. 5
Intermittori-Oscillatori 7
L'oscillatore di serie è fornito di albero in ingresso con sedeper linguetta. Portandola in posizione ortogonale rispetto alpiano B (vedi fig. 7) in direzione della torretta, questa si po-siziona al centro della pausa B.Questa posizione intermedia può essere utilizzata come ri-ferimento per la fasatura.Se I'albero d'ingresso è in questa posizione, ruotandolo inun senso o nell'altro, si otterrà comunque la prima corsa an-golare della torretta in senso antiorario (vedi fig. 7). Peravere la prima corsa angolare in senso orario è sufficienteportare I'albero in entrata al riferimento di fasatura oppostodi 180° rispetto al precedente (vedi fig. 8).
The standard OSCILLATING drive OT has an inlet shaftwith keyway. When the keyway is positioned square toplane B and "looking" at the turret (see pict. 7), this one willbe just in the middle of dwell B. This position can be usedas setting point.If the inlet shaft in this position is rotated, whichever the ro-tation direction, the first angular displacement of the turretwill be counterclockwise (see pict. 7). To have it clockwise,you only need to place the inlet shaft 180° from the positionmentioned above, i.e. square to plane B and with the keywaylooking in the direction opposite to the turret (see pict. 8).
L'albero portacamma de-lI'intermittore standard èdotato di una linguetta chepuò essere utilizzata comeriferimento di fase. Quandoquesta è in posizione supe-riore, a 90° rispetto al pianod'appoggio, il meccanismoè situato a metà del periododi pausa (vedi fig. 6 pos.1).In caso di unità rotante concamma a doppio profilo,quando la linguetta è in po-sizione superiore o infe-riore, a 90° rispetto al pianodi appoggio, il meccanismoè situato a metà del periododi pausa. In questo caso ildisco intermittente eseguedue spostamenti e duepause con un solo giro del-l'albero in ingresso (vedi fig.6 pos. 2).
RIFERIMENTI DI FASEREFERRING TO SET POINT
INTERMITTORE ITIT INTERMITTENT DRIVE
The cam holder shaft of astandard intermittent driveIT is equipped with a key-way, which can be used asreference set point. Whenthe keyway is in upper posi-tion, 90° to the base, the in-dexing mechanism is exactlyin the middle of the dwell(see pict. 6 pos. 1). In caseof an index unit with doubleprofile cam, when the key-way is in upper or lower po-sition, 90° to the base, theindexing mechanism isexactly located in the mid-dle of the dwell.In this latter case, the out-put intermittent disk per-forms two transfers andtwo dwells with only onerotation of the inlet cam-shaft (see pict. 6 pos. 2).
Fase di trasferimento
Fase di pausa
Transfer
Dwell
OSCILLATORE OTOT OSCILLATING DRIVE
Intermittent/Oscillating drives8
II divisore può essere equipaggiato di mi-crointerruttore azionato da camma sul pro-lungamento dell'albero in ingresso.Quando il periodo di pausa determinato dallarotazione della camma non è sufficiente-mente lungo per compiere tutte Ie lavorazioniprogrammate, per mezzo del microinterrut-tore si arresta il motore autofrenante (equindi il disco intermittente) per tutto iltempo necessario alle operazioni.La posizione della camma del micro deveessere tale che la tavola si arresti a metàdel periodo di pausa (cosa facilmente veri-ficabile in quanto in tale posizione la chia-vetta e verticale-vedi anche a pag.7).
MICROINTERRUTTORE DI FASESET MICROSWITCH
The intermittent drive IT can also be equip-ped with a microswitch operated by a littlecam on the rear part of the inlet power shaft.When the dwell period generated by the-cam rotation is not long enough for opera-tion's needs, the limit switch enables to stopand start an electric brake motor and thus tocontrol the dwell time to meet the aboveneeds.The microswitch cam must be set in such aposition that the table stops in the middle ofthe dwell period. This can be checked veryeasily as, in such position, the key way isvertical (see page 7).
CARICHI ESTERNIEXTERNAL LOADS
LATI DI MONTAGGIOMOUNTING SIDES
II corpo del divisore AUTOROTOR viene fornito di serie confinitura di macchina sui sei lati per consentire il montaggio inogni posizione (vedi fig. 11).
The standard drive is delivered with flat machine finishingon all sides, to make easy the mounting in any position (seepict. n° 11).
CARICHI ESTERNI MAXMax external loads
IT/OT 10
IT/OT 15
IT/OT 25
IT/OT 35
IT/OT 55
IT/OT 75
75
300
550
800
2000
ASSIALEAxial
X [daN]
TipoType
RADIALERadialJ [daN]
75
300
550
800
2000
2
10
32
65
210
RIBALTANTEOverturningYR [daNm]
Intermittent/Oscillating drives20
DIMENSIONI DI CAMMA E MICRO DI FASEOVERALL DIMENSIONS OF CAM/SET MICROSWITCH
Intermittori-Oscillatori 21
POSIZIONE DI LAVORO IT/OTIT/OT OPERATING POSITION
POSIZIONE DI MONTAGGIO UNITÀ MOTRICEIT/OT POWER DRIVE UNITS ASSEMBLING POSITION
Intermittent/Oscillating drives22
ESEMPI DI ASSEMBLAGGIO CON UNITÀ MOTRICIASSEMBLING EXAMPLES WITH DRIVE UNITS
Intermittori-Oscillatori 23
INTERMITTORI/OSCILLATORI VELOCI SERIE 5HIGH SPEED INTERMITTENT/OSCILLATING DRIVES SERIE 5
L'intermittore/oscillatore veloce ITV/OTV serie 5 Autorotor èun dispositive meccanico ad assi ortogonali che, tramite unatrasmissione a camma e rulli in presa continua, trasforma ilmoto rotatorio uniforme dell'albero in entrata in una rota-zione intermittente od oscillante ben determinata dell'alberoin uscita.Le principali caratteristiche tecniche degli ITV/OTV sono:1 Velocità elevate con rotazione dell'albero in uscita inte-
ramente controllata: un valore medio di riferimento puòessere di 700 cicli/min (le frequenze di lavoro realizzabilivariano in relazione alla inerzia dell'applicazione e al nu-mero di stazioni).
2 Angolo sulla camma corto in relazione al basso numerodi divisione sull'albero in uscita.
3 Numero di divisioni standard da 2 a 36.4 Leggi di moto progettate in funzione delle specifiche ne-
cessita dell'applicazione del cliente.5 Camma a tamburo temperata e rettificata sul profilo.6 Posizione di arresto dell'albero in uscita autobloccata.7 Assenza di vibrazioni.8 Rotazione ugualmente possibile sia in senso orario che
antiorario.9 Manutenzione minima.10 Potenza minima in relazione all'elevato numero di cicli.11 Ripetibilita elevata: ± 0.01 mm sul raggio di lavoro dei rulli.
Applicazioni: macchine con elevato numero di cicli, con ro-tazione dell'albero del divisore in tempi brevi(20÷25% del tempo cicio) e pause significa-tive (80÷75% del tempo cicio della macchina).
The Autorotor high speed intermittent/oscillating driveITV/OTV series 5 is a mechanical square axis device. A me-chanical cam with followers transforms the inlet shaft uni-form rotation into a predetermined intermittent rotation oroscillation at the outlet.The ITVs/OTVs main features are:1 High speed with full control of the out-put shaft rotation;
700 cycles/min. can be considered as an average(though it depends heavily on the inertia of the applica-tion and the stations number).
2 Short cam angle even with few stations.3 Standard divisions: 2 to 36.4 Most suitable motion law for specific customer's need.5 Barrel cam heat treated and ground on the helix (pro-
file).6 Self-locking in dwell position.7 No vibrations.8 Can rotate equally well clockwise or counterclockwise.9 Very low maintenance.10 Very low power installed.11 High repeatability: ± 0.01 mm on cam followers' working
radius.
Applications: high speed machines, with displacement timeaccounting from 20-25% of the machine cycle(80-75%% being the dwell time).
LA NOSTRA BASE IN GERMANIAOUR BASE IN GERMANY
AUTOROTOR DEUTSCHLAND GMBHMühlweg 47
67117 LimburgerhofTel. +49/623661003 - Fax +49/623661004
e-mail: info@autorotor.de - http://www.autorotor.de
AustraliaHAWKER RICHARDSON1a 62-66 Newton Road - Wetherill Park NSW 2164Ph. 0419365463 - Fax 1800454599jc@hrltd.com.au - www.hrltd.com.au
Belgium HollandELEKTROMASS - UNIDRIVE BVBASchoolstraat, 12 - 09040 Sint – AmandsbergPh. +32/92381414 - Fax +32/92381227sales@elektromass.com - www.elektromass.com
BrasilAXIOS COMERCIO DE MAQUINAS E EQUIPAMENTOS LTDARua Taipas, 632-8A, Bairro Barcelona,09560-200 São Caetano Do Sul, São PauloPh. (55) (11) 4221-8003 - Fax (55) (11) 4226-7271axios@axiosequipamentos.com.br - www.axiosequipamentos.com.br
CanadaSEMPRESS CANADA INC.3580A Wolfedale Road - Mississauga, Ontario L5C-2V6Ph. +1/905-949-2324 - Fax +1/905-949-1944sempress@sempress.ca - www.sempress.ca
Czech Rep.BIBUS S.R.O.Videnska, 125 - 63927 Brno CSPh. +420/547125326 - Fax +420/547125310kelbl@bibus.cz - www.bibus.cz
DenmarkBONDY A/SIndustriparken 16-18 - DK-2750 BallerupPh. +45/70151414 - Fax +45/44641416kar@bondy.dk - www.bondy.dk
LMT TRANSMISSION A/SGrundtvigs Alle, 168 - 6400 Sonderborg Ph. +45/74431880 - Fax +45/74431881lmttransmission@lmttransmission.dk - www.lmttransmission.dk
I NOSTRI PRINCIPALI RAPPRESENTANTI E DISTRIBUTORI ALL’ESTEROOUR MAIN REPRESENTATIVES AND DISTRIBUTORS ABROAD
FranceBERNAY AUTOMATION S.A.1, Rue de Menneval - 27304 Bernay CedexPh. +33/232473510 - Fax +33/232430188info@bernay-automation.com - www.bernay-automation.com
GreecePNEUMATEC IND. AUT. SYSTEMSNevrokopiou, 18 - 11855 Athens ELPh. +30-210-3412101 - Fax +30-210-3413930pantosit@otenet.gr - www.otenet.gr
IsraelLEDICO TECHNOLOGIES LTD.15 Lazarov St.- P.O. B. 17091 - Rishon Le Zion 75654Ph. +972/ 3 9630009 - Fax +972/ 3 9630055
MaltaRAYAIR AUTOMATION LTD.Corradino Industrial Estate, KW 23 G - PAOLA, PLA 08 MaltaPh. +356 21 672497 - Fax +356 21 805181info@ rayair-automation.com - www.rayair-automation.com
SingaporeSERVO DYNAMICS PTE LTD.10 Kaki Brukit Road, 1 01-30 - Kaki Brukit Ind. Park 416175Ph. +65/8440288 - Fax +65/8440070servodynamics@servo.com.sg - www.servo.com.sg
Slovak Rep.BIBUS S.R.O.Priemyselná 4 - SK-949 01 NitraPh. +421 87 741 25 25 - Fax +421 87 651 67 01bibus@bibus.sk - www.bibus.sk
SloveniaLIPRO D.O.O.Smarska c. 18 - 6000 Koper - CapodistriaPh. 00386-56251343 - Fax 00386-56251344lipro@siol.net
SpainCOTRANSA COMERCIAL DE TRANSMISIONES S.A.P.I. Trobika, C/Landeta, 4 - 48100 Mungia - BizkaiaPh. +34/944710102 - Fax +34/944710345cotransa@cotransa.net - www.cotransa.net
USA ArkansasLouisianaNew MexicoOklahomaTexas
IllinoisIndianaMichiganOhio
BURNS CONTROLS13735 Beta RoadDallas Texas 75244Ph. +1/972-233-6712 - Fax +1/972-233-8039burns@burnscontrols.com - www.burnscontrols.com
EASOM AUTOMATION SYSTEMS INC.32471 Industrial DrMadison Heights MI 48071Ph. +1/248-307-0650 - Fax +1/248-307-0701sales@easomeng.com - www.easomeng.com
PRODUZIONEAUOROTORAUTOROTOR PRODUCTS
UNITÀ MECCANICA PER AUTOMAZIONEMECHANICAL UNITS FOR AUTOMATION
MANIPOLATORIMANIPULATORS
INTERMITTORI/OSCILLATORI ASSI PARALLELI IT/OTSQUARE AXIS IT/OT INTERMITTENT OSCILLATING DRIVES
INTERMITTORI/OSCILLATORI VELOCIHIGH SPEED INTERMITTENT OSCILLATING DRIVES
INTERMITTORI/OSCILLATORI ASSI PARALLELI AP/OPSQUARE AXIS IT/OT INTERMITTENT OSCILLATING DRIVES
UNITÀ MOTRICIPOWER DRIVE UNITS
S.r.l.Via dell’Industria, 426010 Vaiano Cremasco (CR) - ItaliaTel. 0373 278105 (r.a.) - Fax 0373 278065www.autorotor.it - e-mail: autorotor@autorotor.it