Post on 30-Jun-2018
European Coatings ShowJoncrylJoncryl®® FLXFLX water-based binders for flexible packaging inks29th of March 2011BASF Nederland B.V. - Jan van Delft
High High QualityQuality PrintingPrinting
PoweredPowered byby Water !Water !
BASF Nederland B.V. - Hall 7A - 411
29-03-2011– 2
Compliance / Safety Performance / Effect
Cost / Efficiency
Print quality
Carbon Footprint
Color strength
Lower energy consumption
Adhesion on flexible films
Printing speed
Resistance propertiesFood contact
Lamination bond strength
Sustainable raw materials
Solvent emission control
Safety and health protection
Material saving
Resolubility
Capital investment saving
Opacity
Explosion safety
Reduced coating weigths
Joncryl® FLX Line Market Drivers
BASF Nederland B.V. - Hall 7A - 411
29-03-2011– 3
Eco-Efficiency Analysis Solvent-based vs Water-based printing
User Benefit:
Printing 1000m2 of LDPE Film
40% image coverage,4-station press,Europe.
0.0
1.0
2.00.01.02.0
costs (norm.)
envi
ronm
enta
l im
pact
(nor
m.)
Water-basedSolvent-based
Conclusion: Water-based is the Eco-efficient way of printing
BASF Nederland B.V. - Hall 7A - 411
29-03-2011– 4
Eco-Efficiency Analysis Solvent-based vs Water-based printing
User Benefit:
Printing 1000m2 of LDPE Film
40% image coverage,4-station press,Europe.
0.0
1.0
2.00.01.02.0
costs (norm.)
envi
ronm
enta
l im
pact
(nor
m.)
Water-basedSolvent-based
Conclusion: Water-based is the Eco-efficient way of printing
BASF Nederland B.V. - Hall 7A - 411
29-03-2011– 5
Flexible PackagingApplication Areas
Surface print PELow- /medium-duty
Surface print PEHeavy-duty
Surface Print OPP
Reverse Print OPPLow-duty lamination
Flexible Packaging Application Areas Surface print and lamination inks
Surface print
Lamination
Reverse Print OPP, PETMedium-duty lamination
Reverse Print Nylon, PETHeavy-duty lamination
BASF Nederland B.V. - Hall 7A - 411
29-03-2011– 6
Joncryl® FLX 5000 & Joncryl® FLX 5002 Self-crosslinking acrylic emulsion for surface print
Suitable for surface print PE, OPP and bio-filmsExcellent resolubilityVery good print behavior (flexo)Good end resistance of printed materialVery successful in the mediumVery successful in the medium--duty areaduty area
Carrier bagsCarrier bagsBread bagsBread bags
BASF Nederland B.V. - Hall 7A - 411
29-03-2011– 7
Suitable for surface print PE for medium- & heavy-duty applicationsGood printability and resolubilityVery good resistance properties
Scratch resistanceWrinkle resistance (dry and wet) Heat seal resistanceBlocking resistanceWet rub resistance (satra)Alkali resistance
Deep freeze packaging, out door packaging
Joncryl® FLX 5020 Self-crosslinking acrylic emulsion for surface print
BASF Nederland B.V. - Hall 7A - 411
29-03-2011– 8
Lamination Ink Market Current Situation
Lamination market is currently covered for 99% by solvent-based ink
First generation water-based lamination inksWaterbased PUD ink General purpose ink, for low-, medium-duty lamination
+ Good lamination bond strength (OPP, PET)
- Poor compatibility with various pigment concentrates
- Moderate resolubility / printability (substrate wetting)
- High price
Typical solvent-based lamination inksNC / Thermoplastic PU ink General purpose ink, for low-, medium-duty lamination
PVB / Adhesion promotor ink Medium-duty lamination ink, flexo & gravure
PVC ink Heavy-duty lamination ink, gravure only
NC / Elastomeric PU ink More universal ink, for medium-duty lamination
Elastomeric PU ink Universal lamination ink, flexo & gravure
E
V
O
L
U
T
I
O
N
BASF Nederland B.V. - Hall 7A - 411
29-03-2011– 9
Lamination Ink Market Current Situation
Lamination market is currently covered for 99% by solvent-based ink
First generation water-based lamination inksWater-based PUD ink General purpose ink, for low-, medium-duty lamination
+ Good lamination bond strength (OPP, PET)
- Poor compatibility with various pigment concentrates
- Moderate resolubility / printability (substrate wetting)
- High price
Typical solvent-based lamination inksNC / Thermoplastic PU ink General purpose ink, for low-, medium-duty lamination
PVB / Adhesion promotor ink Medium-duty lamination ink, flexo & gravure
PVC ink Heavy-duty lamination ink, gravure only
NC / Elastomeric PU ink More universal ink, for medium-duty lamination
Elastomeric PU ink Universal lamination ink, flexo & gravure
Development of Joncryl FLX5040
for Lamination Inks for OPP and PET
Joncryl FLX 5030 for OPP lamination
E
V
O
L
U
T
I
O
N
BASF Nederland B.V. - Hall 7A - 411
29-03-2011– 10
Excellent resolubility
Reverse print PET and OPP laminationGood lamination bond strengthGood blocking resistanceHigh heat seal bondPigment concentrates versatility
resin free and resin based concentrates
Joncryl® FLX 5040 Self-crosslinking acrylic emulsion for lamination inks
Polyester
Color
White
Adhesive
LDPE
Lamination Bond strengthF
O
R
C
E
F
O
R
C
E
F
O
R
C
E
BASF Nederland B.V. - Hall 7A - 411
29-03-2011– 11
Joncryl® FLX 5040 Lamination Bond strength
OPP//OPP PET//PE
Ink - Heat seal + Heat seal - Heat seal + Heat seal
Color 2.5 2.5 2.0 2.0
White 2.5 2.5 2.5 3.0
Color+White 2.5 2.0 2.0 2.0
Lamination bond strength in N/15mmAdhesive: 2K PUR solvent free, 2.2 gsm dryHeat seal conditions: 140°C/400N/1sec.
Lamination results meet market requirements (2N/15mm)
BASF Nederland B.V. - Hall 7A - 411
29-03-2011– 12
Joncryl® FLX line Property overview
Surface print Resolubility Resistance Joncryl® FLX 5000 ++ + Joncryl® FLX 5002 +++ +/- Joncryl® FLX 5020 + ++ Lamination Resolubility Bond strengths Joncryl® FLX 5030 + ++ Joncryl® FLX 5040 ++ +++
Product and formulation details in the Joncryl FLX® brochure
BASF Nederland B.V. - Hall 7A - 411
29-03-2011– 13
Joncryl® FLX product line Conclusions
Proven water-based technology platformfor film printing
Excellent resolubility and printability
For surface print and for reverse print lamination
The cost-effective and eco-efficient alternative to solvent-based systems