Post on 24-Jul-2018
Page 1 of 3
Head Office Spotorno Allé 8 DK-2630 Taastrup Denmark Tel +45 5911 1110 Fax +45 5911 1180 superfos@superfos.com www.rpc-superfos.com
CVR. no. 43 23 95 11 (Superfos a/s)
Plast Service Srl
Via delle Industrie, 101/103
84092 Bellizzi (SA)
11th April 2014
Certificate of compliance – EU food legislation
This certificate is valid for the following products:
Product line Type of product
UniPak Consumer
RingLock Consumer
RingSafe Consumer
SuperLight Consumer
SuperLock Consumer
SuperLift Industrial
SuperCube Industrial
SuperFlex Industrial
Hobbock Industrial
RPC Superfos hereby warrants that all products delivered are in accordance with the data
sheet for the product provided and suitable for food applications.
RPC Superfos further warrants that the products comply with the European Union
Commission, all with amendments:
Regulation EC No. 1935/2004 on materials and articles intended to come into contact
with food
Regulation No. 10/2011/EC: “Plastic materials and articles intended to come into
contact with food”.
Regulation 2023/2006 on rules of Good Manufacturing Practice
Directive 94/62 on packaging and packaging waste with amendments, last 219/2009.
– together the “Applicable EU Legislation”
The products are suitable for all food types and for any long term storage at ambient
temperature or below.
Page 2 of 3
The compliance is verified by Overall migration testing at an external accredited laboratory
under the following conditions:
Simulants Test conditions
3 % acetic acid 30 minutes at 90°C followed by 10 days at 40°C
50% ethanol 30 minutes at 80°C followed by 10 days at 40°C
Olive oil 30 minutes at 90°C followed by 10 days at 40°C
The overall migration testing is performed according to method EN1186-2 and EN1186-3.
For substances with SML (specific migration limits) values, these are verified by specific
migration testing. Test conditions dependent on actual substance.
If information on specific dual use substances in individual products is required please contact
us.
The printing inks used by RPC Superfos are all in compliance with:
EuPIA Guideline on Printing Ink applied to the non-food contact surface packaging materials
and articles. The products are produced without inks containing the following substances :
Benzophenon
4-Hydroxybenzophenon
4-Methylbenzophenon
2,2’-Dimethoxy-2-phenylacetophenon
1-hydroxy-cyclohexyl phenyl ketone
2,4-diethyl thioanthone (DETX)
2-methyl-4’-(methylthio)-2-morpholinpropiophenone
Ethyl-4-dimethylaminobenzoate
Methyl-2-benzoylbenzoate
However, in accordance with the Applicable EU legislation it is the responsibility of the
customer to ensure that the product supplied by RPC Superfos is suitable for the intended use
and that the use is in accordance with the relevant acts of law, statutory orders and other
rules and regulations, including the said Directives.
RPC Superfos warrants full traceability of the products delivered throughout the manufacturing
process.
RPC Superfos factories are as a minimum certified according to ISO9001 and BRC/IOP.
The present certificate is valid for a period of one year starting from the date first above
written.
If you have any questions you are welcome to contact us.
Best regards
Page 3 of 3
RPC Superfos
Miguel Saboga
Group QHSE Manager
Lack of fulfilment of conditions as set out in the Certification Agreement may render this certificate invalid.
Any changes in the product shall immediately be reported to DNV GL Business Assurance Italia S.r.l. in order to verify whether this
certificate remains valid.
The BRC logo belongs to the British Retail Consortium, who grants the use under licence. If you would like to feedback comments on
the BRC Global Standard or the audit process directly to BRC, please contact enquiries@brcglobalstandards.com or call the TELL BRC
hotline +44 (0)20 7717 5959 DNV GL BUSINESS ASSURANCE ITALIA S.R.L. - VIA ENERGY PARK, 14 - 20871 VIMERCATE (MB) – ITALY – TEL. +39 039.68 99 905 – WWW.DNVBA.COM/IT
DNV BUSINESS ASSURANCE BRC / IOP CERTIFICATE
Certificate No. 103438-2011-ABRC IOP-DEN-ACCREDIA
This certifies that
Superfos A/S, Randers Haraldsvej 25 - DK-8960 Randers - Denmark
BRC Registration number: 5769921
Has been evaluated by DNV GL Business Assurance Italia S.r.l. and found to meet the requirements of:
BRC/IOP Issue 4 – Global Standard –Packaging And Packaging Materials, February 2011
Packaging Category: High Hygiene Risk
Packaging Field: 04 - Plastics
Scope:
The manufacture by injection moulding PP lids, containers and pails, with and without handles (plastic),
plain or decorated by IML (PP or Paper) for food and non-food product packaging.
Exclusion from scope:
None
Achieved grade
GRADE A
Initial Audit Date 07-09-2009
Evaluation Date 11-09-2014
Re- evaluation due date from 10-08-2015 to 07-09-2015
Certificate expiry 19-10-2015
Place and date
for the Accredited Unit
Vimercate (MB), 2014-10-15
DNV GL Business Assurance Italia S.r.l.
Dominik Lisiewski Lead Auditor
Auditor number: 053067
Zeno Beltrami
Management Representative
Lack of fulfilment of conditions as set out in the Certification Agreement may render this certificate invalid.
Any changes in the product shall immediately be reported to DNV GL Business Assurance Italia S.r.l. in order to verify whether this
certificate remains valid.
Visit www.brcdirectory.com to validate certificate authenticity. The BRC logo belongs to the British Retail Consortium, who grants the use under licence. If you would like to feedback comments on
the BRC Global Standard or the audit process directly to BRC, please contact enquiries@brcglobalstandards.com or call the TELL BRC
hotline +44 (0)20 7717 5959 DNV GL BUSINESS ASSURANCE ITALIA S.R.L. - VIA ENERGY PARK, 14 - 20871 VIMERCATE (MB) – ITALY – TEL. +39 039.68 99 905 – WWW.DNVBA.COM/IT
DNV BUSINESS ASSURANCE BRC / IOP CERTIFICATE
Certificate No. 69923-2010-ABRC IOP-POL-ACCREDIA
This certifies that
RPC Superfos Biezeweg 19 - B-9230 Wetteren - Belgium
BRC Registration number: 5974544
Has been evaluated by DNV GL Business Assurance Italia S.r.l. and found to meet the requirements of:
BRC/IOP Issue 4 – Global Standard –Packaging And Packaging Materials, February 2011
Packaging Category: High Hygiene Risk
Packaging Field: 04 - Plastics
Scope:
The manufacture by injection moulding, PP lids, containers and pails, with and without
handles (plastic), plain or decorated by IML (PP) for food and non-food product packaging
Exclusion from scope:
None
Achieved grade
GRADE A
Initial Audit Date 02-12-2010
Evaluation Date 05-11-2014
Re- evaluation due date from 09-10-2015 to 06-11-2015
Certificate expiry 08-12-2015
Place and date
for the Accredited Unit
Vimercate (MB), 2014-12-09
DNV GL Business Assurance Italia S.r.l.
Magdalena Widuch Lead Auditor
Auditor number: 053142
Zeno Beltrami
Management Representative
DNV BUSINESS ASSURANCE MANAGEMENT SYSTEM CERTIFICATE
Certificate No. 61620-2009-AQ-DNK-DANAK
This is to certify that
RPC Superfos La Genête S.A.S.
La Genête, F-71290 Cuisery, France
has been found to conform to the management system standard:
DS/EN ISO 9001:2008
This certificate is valid for the following product or service ranges:
Production and printing of injection moulded open top plastic packaging
Place and date:
Hellerup, 2012-11-21This certificate is valid until:
2015-10-31 DET NORSKE VERITAS,
BUSINESS ASSURANCE, DANMARK A/S
The audit has been performed under the supervision of:
Dominik Lisiewski Lars Appel
Lead Auditor
DANAK SYSTEM Reg.nr. 5001
Managing Director
Lack of fulfilment of conditions as set out in the Certification Agreement may render this certificate invalid.
ACCREDITED UNIT: DET NORSKE VERITAS, BUSINESS ASSURANCE, DANMARK A/S, TUBORG PARKVEJ 8, 2., DK-2900, HELLERUP, DANMARK, TEL:+45 39 45 48 00, WWW.DNVBA.COM