Hd Systems LLC actively marketed products 2006

Post on 24-Dec-2014

265 views 4 download

description

 

Transcript of Hd Systems LLC actively marketed products 2006

Actively Marketed Products

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Component SetsCSF

• Short Cup• Sizes 8~100• Ratios

30,50,80,120,160

• Life = 35,000 hr

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Component SetsCSG “Quantum”

• Same Dimensions as CSF

• Sizes 14 ~ 65• Ratios 50,80,100,120,160• 30% inc. in Torque

– Rated, Peak, Ratchetting, Momentary

• 50% inc. in life to 50,000 hr

• New Tooth, New Processing

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

CSD-typeCSF-typeHDUC-type

100%

60%

30%

HDUC-type CSF-type CSD-type

Component SetsCSD– “Ultra Flat”– Sizes 14 ~ 50– Ratios 50, 100, 160– Life = 35,000 hr.

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

CSD “Ultra Flat”Volume vs. Rated Torque AdvantageGraph Considers Component Only

Benefit Is Amplified When Housing Is Considered

1.0E-05

1.0E-04

1.0E-03

10 100 1000Rated Torque (Nm)

Volu

me

(m3 )

CS

CSF

CSD

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

0.1

1

10

10 100 1000Rated Torque (Nm)

Mas

s (K

g) CSCSFCSD

CSD “Ultra Flat”Mass vs. Rated Torque AdvantageGraph Considers Component Only

Benefit Is Amplified When Housing Is Considered

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Component Sets– SHF “Silk Hat”

• Short Cup• Hollow Shaft• Sizes 14~58• Ratios

30,50,80,100,120,160• Life = 35,000 hr.

Special Diameter

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Component Sets

– SHG “Silk Hat” “Quantum”• Same Dimensions as SHF• 30% inc. in Torque

– Rated– Allowable Peak– Ratchetting– Momentary

• 50% inc. in life to 50,000 hr• Price is ~10% higher than SHF

Special Diameter

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Component Sets

– HDUF “Pancake”• Similar Dimensions to HDF• Single Bearing• F/S Stopper Dimensions are

Different than HDF

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Component Sets

HDUR “Pancake”• Similar to HDR• Double Bearing• F/S Stopper Dimensions

are Different than HDR

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HDT – “T cup” Hollow Shaft Gearsets

• Bore size limited by solid WG– 14mm up to 70 mm

• Sizes– 14, 20, 25, 32, 40, 50

• Ratings– Same as std. gearsets

with involute teeth

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HDB – Phasing Gear Set

• Back-to-back pancakes

• As a differential provides 1:1 ratio from input to output

• Typically used for circumferential print registration

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HDI – “Infinit-Indexer”

• Static phase adjuster• Size 05, 10, 25, 50,

100, 200

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HDI Installation

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

CSF-2UH– Sizes 14 ~ 65– Ratios 30 ~ 160– Cross Roller

Bearing Output

GearheadsELECTROMATE

Toll Free Phone (877) SERVO98Toll Free Fax (877) SERV099

www.electromate.comsales@electromate.com

Sold & Serviced By:

Gearheads

CSG-2UH “Quantum”– Sizes 14 ~ 65– Ratios 50 ~ 160– Same Dimensions as

CSF-2UH– 30% inc. in Torque– 50% inc. in Life

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

SHF-2UH– Sizes 14 ~ 58– Ratios

30,50,80,100,120,160

– Cross Roller Bearing Output

Gearheads

SHF-2UJ– Sizes 14 ~ 58– Ratios

30,50,80,100,120,160

– Input Shaft– Cross Roller

Bearing Output

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Gearheads

SHG-2UH “Quantum”– Sizes 14 ~ 65– Ratios

50,80,100,120,160– Same Dimensions as

SHF-2UH– 30% inc. in Torque– 50% inc. in Life

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

SHD-2SH• Integrated Cross Roller Bearing• “Ultra Flat” “Silk Hat”• Sizes 14 ~ 40• Ratios 50 ~ 160• Life = 35,000 hrs.• “OEM Gearhead”

• Cost Savings from Assembly Time• Integral Bearing Reduces Space

GearheadsELECTROMATE

Toll Free Phone (877) SERVO98Toll Free Fax (877) SERV099

www.electromate.comsales@electromate.com

Sold & Serviced By:

CSF Mini Gearheads

Gear Ratios: 30,50,100 (w/ 80:1 for #14)

4 Point Contact Output Bearing

GearheadsELECTROMATE

Toll Free Phone (877) SERVO98Toll Free Fax (877) SERV099

www.electromate.comsales@electromate.com

Sold & Serviced By:

Output: Flange

Input: Motor Mount

Output: Shaft

Input: Motor Mount

Input: Shaft

Output: Shaft

GearheadsELECTROMATE

Toll Free Phone (877) SERVO98Toll Free Fax (877) SERV099

www.electromate.comsales@electromate.com

Sold & Serviced By:

CSF-GH

- 5 Sizes: 14, 20, 32, 45, 65

- 5 Gear Ratio: 50:1, 80:1, 100:1, 120:1, 160:1

- Dimensions are the Same as HPGCross Roller Bearing

Clamp Coupling

Gearheads

Motor Adapter

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Harmonic Planetary®

HPG Series

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Harmonic Planetary®

Benefits of Harmonic Drive GearingHigh Positional AccuracyLow Lost MotionSmooth Motion

Benefits of Planetary GearingLow Gear RatiosQuick-Connect Coupling

+

= Harmonic Planetary®

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Ring Gear

Innovative Ring Gear for optimized load distribution and backlash less than 1 arcmin for the life of the gearhead

“Eliminate Backlash Creep with the Harmonic Planetary”

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Integral Cross Roller Bearing

Large Cross-Roller Bearing for High Loads and Smooth, Precise Motion

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Flange or Bolt-on ShaftOutput

Convenient Output Configurations

Flange output is ideal for turntable applications

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Quick-Connect Couplingwith Balanced Pinion

Easy Mounting to Any Motor

Motor Adapter Flange

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Product Overview

6 Frame Sizes: Ratios*: 3, 5, 9, 11, 12, 15, 20, 21, 25, 33, 45

* Depending on Frame Size

3 Arc-Min Backlash Standard1 Arc-Min Low Backlash OptionL10 = 20,000 hrs.

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HPG vs. Alpha SP Series

Alpha SP Series Harmonic Planetary Series

HPG’s axial length is SHORTER than Alpha SP

HPG’s favorable form factor

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HPG vs. Alpha SP SeriesT

orsi

on A

rc-m

in

-10

-5

0

5

10

-25 -20 -15 -10 -5 0 5 10 15 20 25

Torque N・m

Tors

ion

arc

-min

HPG has LOWER Backlash & Hysteresis loss

Tor

sion

Arc

-min

Torque N.m

HysteresisRed: HPG-20A-5-BL3

Black: Alpha SP075-5

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HPG vs. Alpha SP Series

-6-4-202468

-25 -20 -15 -10 -5 0 5 10 15 20 25Torque Nm

Tors

ion

arc

-min

HPG has LOWER Backlash & Hysteresis loss

Tor

sion

Arc

-min

HysteresisBlue: HPG-20A-33-BL1

Red: HPG-20A-33-BL3

Black: Alpha SP075-SF2-28

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Test Conditions:

1500 rpm, 885 in-lb

Continuous Duty, Sinusoidal Load

HPG: BL3 Version Maintains 3 Arc-min Specification - No Backlash Creep

0.0

2.0

4.0

6.0

8.0

10.0

12.0

14.0

1.0 10.0 100.0 1000.0 10000.0

HPG Satisfies Accelerated Life Test Requirement L10=20,000 hrs.

Durability Test DataRed: HPG-20A-33-BL3

Black: Alpha SP075-28

Hours

Los

t Mot

ion

(arc

-min

)

HPG vs. Alpha SP Series

HPG is still below 3 arc-min @ 49,000 hrs.

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HPG vs. Alpha SP Series

Alpha SP075-M-1-5

HPG has Better Positional Accuracy

HPG-20A-05-BL3 2.4 arc-min

3.9 arc-min

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HPG vs. Alpha SP Series

Alpha SP075-M-1-28

HPG has Better Positional Accuracy

HPG-20A-33-BL3 1.4 arc-min

2.8 arc-min

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HPG vs. Alpha SP SeriesEfficiency

Red: HPG-20A-05-BL3 (LM=3 arc-min) Black: Alpha SP075-M-1-5 (LM=6 arc-min)

0102030405060708090

100

0 5 10 15 20 25Output torque Nm

Effic

ienc

y %

HPG has HIGHER Efficiency (Even while providing lower Lost Motion!)Ef

ficie

ncy

%

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HPG vs. Alpha SP Series No Load Running Torque

Red: HPG-20A-05-BL3 Black: Alpha SP075-M-1-5

01020304050

0 1000 2000 3000

Input speed RPM

NLR

T N

cm

HPG has LOWER Running Torque

NLR

T N

cm

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HPG vs. Alpha SP Series

Moment RigidityRed: HPG-20A-11-BL1/BL3Black: Alpha SP075-SF2-28

-2.5-2.0-1.5-1.0-0.50.00.51.01.52.02.5

-50 -40 -30 -20 -10 0 10 20 30 40 50

Moment Nm

Def

lect

ion

arc-

min

_

HPG has HIGHER Moment Rigidity

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Complementary Product Lines

2

53

Quick Connect

CSF-GH SeriesHarmonic Planetary

HPG Series

Mini Gearheads

CSF-Mini Series

8400

2100

Torque

Gear Ratio5 45 5030 100 120 160

(in-lbs)

(R:1)

Rated

Not To Scale

GearheadsELECTROMATE

Toll Free Phone (877) SERVO98Toll Free Fax (877) SERV099

www.electromate.comsales@electromate.com

Sold & Serviced By:

Harmonic Drive Actuators(Actuator: Integrated Motor + Gearhead + Encoder)

FHA-C• Compact• Hollow Shaft• Accurate• 14 wire for OEM

Amplifiers• 4 Wire for HDSI

Driver• 100V, 200V

(& 24V for #17) Windings

• Brushless

Many Options Available• Absolute Encoder• Output Flange Clamp• Brake• Limit Switches

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Harmonic Drive Actuators(Actuator: Integrated Motor + Gearhead + Encoder)

FHA-C Mini• 3 Sizes• Hollow Shaft• Accurate• 14 wire for OEM Amplifiers

(24V Motor Winding)• 4 Wire for HDSI Driver

(100V Motor Winding)• Brushless

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Harmonic Drive Actuators(Actuator: Motor + Gearhead + Encoder)

RSF-5 Actuator• Compact• Hollow Shaft• Accurate• 8 wire for OEM

Amplifiers• HDSI Driver Avail.• 24V

With Brake

Without Brake

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Harmonic Drive ActuatorsRH-mini• Brush-Type• 4 Sizes: 5, 8, 11, 14• Widely Accepted

• Convenient• Performance

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Harmonic Drive ActuatorsRHS Actuators• Brush-Type• 5 sizes• Shaft Output

RFS Actuators• Brush-Type• 5 sizes• Flange Output

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Chamberlink - HHA

• Very High Vacuum Feed through Actuator

• Operates in Vacuum up to 10-7 Torr

• Currently available in 2 sizes:– 10 and 14

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

O-ring

FlexsplineCircular spline

Vacuum

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Considerations

• Grease – Microcote 096, 196, 296– Perflouropolyether grease suitable for very high

vacuum– Vapor pressure (outgassing) function of temperature

• Vacuum domains– Ultra High 10-9 to 10-12

– Very High vacuum 10-6 to 10-8

• HD Boston Test capability 10-7

– High 10-3 to 10-5

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HHA Advantages / Limitations

• Advantages– Smoothness and accuracy– High ratio instead of 1:1 – Bake out capability to 300 C with motor removed

• Limitations– Low output speed– Position sensing limitations (no home, no output

encoder)– Torque limitations

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HKM- “Powerhub”

• Introduced in 1998-99• Available

– Size 20 has 13mm hole– Size 25 has 27mm hole

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Output bearing

FlexsplineCircular spline – ductile iron phosphate coat on OD

Encoder HP

HKM-25

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

HKM concept

• Compact actuator with through hole• Introduced with ElectroCraft Bru series AC

drives– Allen Bradley acquired ElectroCraft

• G&L Private labels old Electro Kraft drive • HD Boston now supplies G&L drives

• Most customers use their own drive– Compatible with brushless drives

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Nomenclature

• HKM-20-60

Size2025

Output speed60 has 50:1 ratio30 has 100:1 ratio

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

What we supply

• Actuator• Configured drive• Power cable• Feedback cable• IO cable (optional)

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By:

Thank You!

ELECTROMATEToll Free Phone (877) SERVO98

Toll Free Fax (877) SERV099www.electromate.com

sales@electromate.com

Sold & Serviced By: