Post on 24-Jun-2020
2
Hakkımızda About Us
Sirius Elektronik olarak, yüksek teknolojiye sahip makine parkımız ve eğitimli elemanlarımız ile elektronik üretimin her aşamasında hizmet veren bir yan sanayi kuruluşuyuz.
Elektronik üretimin, tasarım desteği, malzeme temini, SMD dizgi, TH dizgi, test, koruyucu kaplama, mekanik montaj, kablolama, kutulama ve paketleme süreçlerini karşılayan hizmet yelpazemiz ile gerek baştan sona tüm üretim, gerekse talep edilen belirli aşamalarda üretimler gerçekleştiriyoruz.
İletişim ve ulaşım olanakları baş döndürücü bir hızla gelişirken dünyamız da giderek küçülüyor. Buna bağlı olarak, artan rekabetle gelen zorlu ve sert koşulları, ancak işbirliği ve güç birliği ile aşabileceğimize inanıyoruz.
Bu inançla, hizmet verdiğimiz alanlarda 20 yılı aşan üretim tecrübemizle bir yan sanayi firmasına yakışır şekilde müşterilerimizin yanında durmak, güç vermek için çalışıyoruz
Sirius Electronics is a sub-contracter electronic manufacturer, with carefully maintained and calibrated equipments and professional staff.
The services we provide range from design to the end product, including hardware and software desing, SMT and Thru-Hole assembly, testing, conformal coating, cable assembly, device mounting and packaging.
We continually invest in our people, service offering and equipment, we invest in long-term relationship with our suppliers and customers. In a demanding world with all means, we believe that we can overcome the difficulties only by co-operating and with reliable partnership.
Depending on this belief, we work to stand next to our customers to add them strength as a reliable and loyal partner with more than 20 years of production experience in the fields we serve.
www.siriuselektronik.com.tr 3
4
Sirius Elektronik üretim aşamalarında aşağıdaki IPC standartları uygulanmaktadır :
1. IPC-A-610D Elektronik Üretimlerin Kabul Edilebilirliği
2. IPC J-STD-001D Lehimlenmiş Elektrik ve Elektronik Ürünlere Ait Gereklilikler
3. IPC/JEDEC J-STD020C Hermetik Olmayan Katı Hal Yüzey Monte Cihazlara Ait Nem Hassasiyet Klasifikasyonu
4. IPC/JEDEC J-STD033A Neme Duyarlı Yüzey Monte Cihazların Kullanımı, Paketlenmesi ve Sevk Edilmesi
At Sirius, The IPC standarts listed below are being applied in production processes :
1. IPC-A-610D Acceptability of ElectronicAssemblies
2. IPC J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies
3. IPC/JEDEC J-STD020C Moisture/Reflow Sensitivity Classification for Nonhermetic Solid State Surface Mount Devices
4. IPC/JEDEC J-STD033A Handling, Packing, Shipping and Use of Moisture/Reflow Sensitive Surface Mount Devices
Kalite Güvence Quality Standarts
SMD ve TH Hatlarımızla Elektronik Kart Dizgisi
Üretilebilirlik Analizi, Proses Geliştirme ve Test
Tasarım ve Ar-Ge, Ürün Geliştirme ve Prototip Üretimi
PCB, Stencil (elek), Elektronik Malzeme Tedarik ve Stok Planlama
PCB Assembly with SMT and THT Lines, Testing
Manufacturability Analiyses, Process Development
Desing and R&D, Prototype Production
PCB, Stencil, Electronic Components Procurement and Inventory Management
Üretim Alanımız : 600 metrekareDepolama Alanımız : 300 metrekareToplam Kapalı Alan : 1.100 metrekareZemin Kaplaması : ESD iletken PVCTavan Kaplaması : Tozumayan taş yünü tavanOrtam : Klimatize ( 24°C sabit şartlandırılmış)
Production Area : 600 square metersStock Area : 300 square metersTotal Area : 1.100 square metersFloor Covering : ESD flooringCeiling Cover : Stone woolEnvironment : Climatized ( 24°C constant )
Üretim Alanımız
Facility
Electronic Manufacturing Services
Elektronik Üretim ve Test Hizmeti
Gizlilik Politikası
Gizlilik ilkemiz doğrultusunda Sirius Elektronik olarak yaptığımız çalışmalarda, müşterilerimizden gelen bilgileri - finansal, tasarım ve uygulama bilgilerini, müşteri ve işletme bilgilerini - üçüncü şahıslara karşı özenle korur ve hiç bir şekilde başka amaçlar için kullanmayız.
Security
We provide security of design and intellectual property rights by signing non-disclosure agreements.
According to our security and privacy policy, we protect all the information transferred to us with a sense of morality, values and ethics throughout our organization.
5
www.siriuselektronik.com.tr6
PCB, elek ve elektronik komponentler olmak üzere Malzeme Tedariği ve Stok Planlama, SMD dizgi, TH dizgi, Dalga Lehimleme ve Elle Lehimleme, Test, Koruyucu Kaplama, Kablo Montajı, Mekanik Montaj, Son Test, Etiketleme ve Paketleme aşamaları ile ister baştan sona anahtar teslim, ister belirli aşamalarında üretim hizmeti sunuyoruz.
Üretimlerinizi bütünüyle ESD korumalı ortamlarda, IPC standartlarına uygun olarak ve kalite standartlarımız
çerçevesinde gerçekleştiriyoruz.
Ayrıca projeleriniz için var olan tasarımınızda kalite arttırmaya yönelik iyileştirmeler, gerektiğinde yazılım ve donanım revizyonları veya yeniden tasarım desteği sağlıyoruz.
Tasarımın üretilebilirliği, malzemelerin giriş kalite ve üretime uygunluğunu kontrol ediyor, üretimde karşılaşılan sorunların çözümü ve sorunun tekrarlanmaması için kök nedenleri araştırıp Düzeltici-Önleyici Faaliyetlerin
belirlenmesinde sürekli geri bildirimlerde bulunuyoruz. Üretim sonunda, üretim notlarımızı ve test sonuçlarını sizlerle paylaşıyor, güncellenmiş üretim bilgilerinizi sizin için dosyalayıp saklıyoruz.
Bu şekilde, elektronik kart üretimlerinizin kendi bünyenizde üretildiği gibi kaliteli ve izlenebilir bir çalışma ortamı oluşturmayı hedefliyoruz.
Elektronik Üretim Hizmetlerimiz
7www.siriuselektronik.com.tr
Electronic Manufacturing Services
PCB, Stencil and Electronic Components Procurement, Inventory Management and Planning, PCB assembly with SMT and THT lines, Testing, Conformal Coating, Cable Assembly, Device Mounting, Final Test, Labelling and Packaging are the services we provide. You can get full turn-key production providing us the Bill of Material, or contract us to provide a consignment assembly using your components, or combine both.
The whole process is done in ESD protected environment and according to IPC standarts.
We analyze bill of material, design for manufacturability and testability to maximize the yield and quality. Following the documentation review, that BOM file, PnP file and gerber file is compared, by close communication, immediate feedback, and rapid respons we prepare the Production File for your assembly. The
Production File accompanies all processes during production and it turns into a report for traceability of that production batch. We note and document all revisions made before and during production to create a consistent and repeatible Production File for next production batch.
We aim to create an atmosphere that
as if the assembly is done in-house at
your company.
Malzeme TedarikComponent Procurement
8
Firmamız, Orta ve büyük ölçekte elektronik tasarım ve üretim desteğine ihtiyaç duyan firmalara, Elektronik kart, ürün veya proje sunarak, yada sahip oldukları sistemlerin modernizasyonu ve iyileştirme işleri konusunda yardımcı olarak katma değerlerinin artmasına yardımcı olur.
SİRİUS Elektronik tecrübeli ve dinamik Ar-Ge kadrosu sayesinde birçok sektöre yönelik innovatif ve robust çözümler sunmaktadır. Sahip olduğumuz tecrübe ve mühendislik altyapısı sayesinde, fikir aşamasındaki projeleri kısa sürede prototip aşamasına getirip müşterilerinin beğenisine sunabilmektedir.
Tasarım ve Ar-Ge
Design and R&D
Our company helps increase the added value by helping to modernize and improve the systems they own by offering firms, electronic cards, products or projects that need electronic design and production support in medium and large scale.
SİRİUS Electronik provides innovative and robust solutions for many sectors thanks to its experienced and dynamic R & D staff. Thanks to the experience and engineering infrastructure we have, we are able to bring ideas into the prototype stage and present it to our customers in a short period of time.
9
SMD dizgi hizmetimiz, üretim için bize aktarılan bilgilerin kontrolü ve düzenlenmesi ile başlar.
Kontrol edilmiş ve onay alınmış yerleşim koordinatları ile dizgi programlanması yapılır. Sayımı ve giriş kalite kontrolleri yapılmış malzemeler dizgi için hazırlanır.
Dizgiden çıkan ilk panelin kontrol ve onayının ardından üretime devam edilir.
Tüm süreçler bütünüyle ESD ortamlarda, IPC standartlarına uygun olarak ve kalite standartlarımız çerçevesinde izlenerek yapılır.
SMD Assembly
We check and compare all the documentation - BOM, Pick&Place and Gerber files - and clarify if any discordance.
The Production File is formed by checked, corrected and approved information.
The assembly starts only after the approval of the first piece assembled.
The facility is ESD protected and all the production process runs in accordance with IPC standarts and Sirius company quality standarts.
SMD Dizgi
10
• DEK Horizon 03 Automatic Screen Printer
• Assembleon Opal X2SF Pick and Place Machine
• Assembleon Topaz XII Pick and Place Machine
• BTU Pyramax 98A Reflow Oven
• NUTEK Board Handling System with Auomatic Loader and Unloader
• DEK Horizon 03 Otomatik Serigrafi Baskı Makinesi
• Assembleon Opal X2SF Otomatik Dizgi Makinesi
• Assembleon Topaz XII Otomatik Dizgi Makineleri
• BTU Pyramax 98A Reflow Lehimleme ve Kürleme Fırını
• NUTEK Kart Yükleme, Taşıma ve Boşaltma Sistemleri
SMT Line
SMT Hattımız
11
SMT Capability
Dizgi Kapasitemiz : 44.200 - 32.000 komponent / saat (IPC - Pratik )
En Küçük PCB Ebatları : 80 x 50 x 0.4mm ( Panel olarak )
En Büyük PCB Ebatları : 330 x 250 x 4.0mm ( Panel olarak )
Komponent Tipleri : Tüm SMD malzeme tipleri, QFP, QFN, DFN, BGA, CSP, mikroBGA, Odd Shape
Komponent Ebatları : (metric) 0201 kılıf pasif komponentler 45mm’ye kadar büyüklükte işlemciler 0.4mm bacak aralığı dahil hassas malzemeler
Dizgi Hassasiyeti : Chip 0201 - 0402 için +/- 50µ QFP-6mm-45mm için +/- 40µ
Feeder Tipleri : Teyp (tape), Çubuk (stick) , Tepsi (tray)
Feeder Kapasitemiz : 280 adet 8mm teyp feeder
Dizgi Programlama Tipi : Optimizasyon yazılımı ile Offline Programlama
Krem Lehim Uygulaması : Tam otomatik serigrafi baskı makinesi ve çerçeveli elek ile
Yapıştırıcı Uygulaması : Tam otomatik serigrafi baskı makinesi ve çerçeveli elek ile
Elek Çerçeve Boyutları : En küçük - 300x300mm çerçeve ve 10x10mm profil En büyük - 736x736mm çerçeve ve 40x40mm profil
Elek Folyosu Kesim Tipleri : Lazer Kesim, Elektroform, Kimyasal Aşındırma, İpek Elek
Lehimleme ve Kürleme : 7-Zone Full Konveksiyon tam otomatik Reflow Fırın ile
Isıtma Boyu : 249 cm
Capacity : 44.200 - 32.000 component / hour (IPC - Practical )
Minimum PCB Size : 80 x 50 x 0.4mm
Maximum PCB Size : 330 x 250 x 4.0mm
Component Types : The complete spectrum of case sizes QFP, QFN, DFN, BGA, CSP, mikroBGA, Odd Shape
Case Sizes : Down to 0201 chips Max. 45x45mm packages Fine pitch components with 0.4mm pitch
Assembly Accuracy : For 0201 - 0402 Chips +/- 50µ For QFPs 6mm - 45mm +/- 40µ
Feeders : For tape&reel, stick , tray
Number of Feeders : 280 units of 8mm tape feeder
Programming : Offline programming with optimization software
Paste Application : With automatic screen printer using stencils with frame
Glue Application : With automatic screen printer using stencils with frame
Stencil Frame Size : Minimum - 300x300mm frame and 10x10mm frame profile Maximum - 736x736mm frame and 40x40mm frame profile
Stencil Leaf : Laser-cut, Electroformed, Chemical etching, Silk
Reflow Soldering : 7-Zone Convension Full Automatic Reflow Oven
Heating Length : 249 cm
SMT Kapasitemiz
12
TH dizgi hizmetimiz, üretim için bize aktarılan bilgilerin kontrolü ve düzenlenmesi ile başlar. Kontrol edilmiş ve onay alınmış yerleşim referansları ile üretim süreçlerine karar verilir.
Sayımı ve giriş kalite kontrolleri yapılmış malzemeler için gereken bacak kesimi, önceden şekil verme işlemleri yapılıp dizgi için hazırlanır.
Elle lehimleme işlemleri eğitimli ve uzman elemanlarımız tarafından uçtan ısıtmalı dijital havyalarla, üretim talebine göre kurşunlu veya kurşunsuz lehimle yapılır.
Dalga lehimleme işleminde ise, manuel dizgi ekibimizin otomatik konveyörlerde dizdiği kartlar dalga lehim makinemizden geçirilir.
Thru-Hole Dizgi
THT Hattımız
• Aksiyel ve Radyal Kalıplı Hazırlama Ekipmanları
• NUTEK Kart Taşıma ve Manuel Dizgi Sistemleri
• Soltec Delta Wave 6622CC Dalga Lehimleme Makinesi
• Kurşunsuz Lehimleme Balverzinn SN100C
13
Thru-Hole Assembly THT Line
We check and compare all the documentation - BOM, Placement and Gerber files - and clarify if any discordance.
The Production File is formed by checked, corrected and approved information.
We decide the production process among preforming the components, top and bottom side assembly, manuel soldering and wave soldering, combining the needs of production and the customers’ requirements.
The facility is ESD protected and all the production process runs in accordance with IPC standarts and Sirius company quality standarts.
•Preforming equipment for axial and radial components
•NUTEK Automatic Board Handling, Unloader and Manuel Assembly System
•Vitronics Soltec Delta Wave 6622CC Wave Soldering Machine
•LeadFree –Balverzinn SN100C solder
14
15
THT Kapasitemiz
THT Capability
Manuel Dizgi
Kapasitemiz : 8.600 - 6.300 Komponent/saat (IPC - Pratik)
En Küçük PCB Ebatları : 80 x 50 0.4mm ( Panel olarak )
En Büyük PCB Ebatları : 330 x 250 x 4.0mm ( Panel olarak )
Malzeme Tipleri : Tüm komponent ve modül tipleri
Malzeme Hazırlama : Otomatik ve yarı otomatik ekipmanlar ile
Radyal Malzemeler : Snap-in:Stand-off veya Snap-in:Stand-on kalıplı sistem ile
Axial Malzemeler : Dik kesme, disk bükme gerilme sistemiyle
Dalga Lehimleme
Kapasitemiz : 10.800-6.000 cm boy/saat ( Teorik - Pratik)
PCB Tipleri : Tüm rijit PCB’ler, esnek (flexible) PCB’ler palet ile
Flux Uygulaması : Tam otomatik nozzle sprey fluxer
Ön Isıtma Sistemi : IR (Infrared) + sıcak hava, esnek ısıtma konfigürasyon sistemi
Pota Tipi : Çift dalga, eğik jet ön dalga, durgun geniş tek yönlü arka dalga Kolaylıkla erişilebilen ayrı bir cüruf haznesine sahip
Kart Soğutma Sistemi : Hava fanları sistemiyle
Optik Kontrol, Touch Up
Sistem : Eğitimli uzman personel ile 10-40x Zoom mikroskoplar, büyüteçler ve termal havyalar
Uygulanan Standartlar : IPC-A-610D Elektronik Üretimlerin Kabul Edilebilirliği IPC J-STD-001D Lehimlenmiş Elektrik ve Elektronik Ürünlere Ait Gereklilikler
Kayıt-Dokümantasyon : Mikroskop ile dijital fotoğraflar
Raporlama Sistemi : Üretim Takip Formları ve Düzeltici-Önleyici Faaliyet Raporları ile
Manuel Assembly
Capacity : 8.600 - 6.300 Component/hour ( IPC - Practical )
Minimum PCB size : 80 x 50 0.4mm
Maximum PCB size : 330 x 250 x 4.0mm
Components : All types of components and modules
Preform : High quality lead forming component prep machine
Radial components : Snap-in:Stand-off or Snap-in:Stand-on system
Axial components : Bending and strecthing system
Solder Wave
Capacity : 10.800-6.000 cm length/hour (Theorical- Practical )
PCB Types : Rigit PCBs, flexible) PCBs with carrier
Flux Application : Full automatic nozzle spray fluxer
Pre-heating System : IR (Infrared) + hot air, flexible pre-heat configuration
Solder Pot Type : Double Wave, Smart Wave, or Combi Wave easily accessible separate dross compartment
Cooling System : Air fans
Optical Inspection, Touch Up
System : Trained and skilled personnel, 10-40x Zoom microscopes, lenses and soldering irons
Standarts : IPC-A-610D Acceptability of ElectronicAssemblies IPC J-STD-001 Requirements for Soldered Electrical and Electronic Assemblies
Documentation : Digital photos with microscopes
Reporting Method : Production Tracing Foils for every batch Corrective-Preventive Action Reports
Fatih Mahallesi 1179 Sokak No : 5A Gaziemir-İzmir
Telefon : +90(232) 281 41 50 - Fax : +90(232) 281 41 45
info@siriuselektronik.com.tr
www.siriuselektronik.com.tr