Post on 22-May-2020
Permissible operating conditionsTemp.Coefcient of Pmax %/°C
Temp.Coefcient of Voc %/°C
Temp.Coefcient of Isc %/°C
-0.38
-0.30
0.05
Under Standard Test Conditions (STC) of irradiance of 1000 W/m²,
Spectrum AM 1.5 and cell temperature of 25°C.
Guarantees and certications
Product warranty**
Performance guarantee**
Product Certited
5 years
Limited warranty for power output :-
90% for 10 years, and 80% for 25 years
IEC 61215, IEC 61730, IEC 61701, CE, BIS
Technical Data for GOLDI_32 Cut Cell GN - Polycrystalline Module
Electrical Parameter at STCModule Type GOLDI032CPY12
Capacity rating - Pmax(Wp)
Power Tolerance (%)
Module efciency (%)
Rated voltage - Vmp(V)
Rated current - Imp(A)
Open circuit voltage - Voc(V)
Short circuit current - Isc(A)
Operating Temperature
Max. System Voltage
Nominal Operating Cell Temp (NOCT)
No of Cells
Cell Conguration
Module dimension Length (A)mm
Module dimension Width (B)mm
Module dimension Height ©mm
Mounting Hole Size (D)mm
Mounting Hole to Hole distance( Y- Pitch)mm
Mounting Hole to Hole distance( X- Pitch)mm
Module Weight Kg
GOLDI_32GN - Polycrystalline Module Key Features
Excellent module conversion efciency.
Up to +3% positive power output guaranteed.
Reducing equipment loss increases the power generation in overall system.
Loss minimization due to excellent temperature co-efcient.
Better performance even at low irradiance condition.
For handling & installation instructions refer Goldi Solar Installation Manual
Dispose-off the product as E-Waste after end of its working life.
** Refer to Goldi Solar’s warranty document for terms and conditions.
Due to constant product modications, Goldi Solar reserves the right to
amend the above specications without prior notice.
www.goldi.oneinfo@goldi.one
India Toll Free : 1800 833 5511
Quality & Reliability
Manufactured in an ISO 9001:2015, ISO 14001:2015 &
OHSAS 18001:2007 certied facility.
IP65 rated junction box for long-term weather endurance.
Manufactured using high grade raw materials from reputed international
suppliers adopting a stringent quality criteria.
Higher specic yield.
Certied for IEC & BIS.
75
0 - 3
14.74
16.95
4.44
20.45
4.89
-40 to 85
1000
45± 2
32
8*4
765
665
34
6*12
450
665
6.2
60
0 - 3
15.04
16.85
3.57
20.35
3.94
-40 to 85
1000
45± 2
32
8*4
600
665
34
6*12
300
635
4.7
50
0 - 3
14.69
16.8
2.98
20.25
3.28
-40 to 85
1000
45± 2
32
8*4
512
665
34
6*12
260
635
4
40
0 - 3
14.15
16.75
2.41
20.1
2.67
-40 to 85
1000
45± 2
32
8*4
425
665
34
6*12
200
635
3.5
Mechanical specicationSolar cells
Encapsulation
Backside
Frame
Front glass
Application Class
Fire Safety
J-box
Surface load
32 pcs Cut Polycrystalline Silicon, 5BB/4BB/3BB/2BB
Ultra - clear PID free EVA (Ethylene-Vinyl-Acetate)
UV protected reective backsheet
Silver Anodized Aluminium Alloy (screwless)
3.2 mm, High Transmission Tempered Glass
Class A
Class C ( Type 1)
IP 65 rated junction box
(snow load 5400 Pa, wind load 2400 Pa).
Drawing measurement in mm
100
0 - 3
16.35
17.05
5.88
20.65
6.45
-40 to 85
1000
45± 2
32
8*4
920
665
34
6*12
500
635
7.5
-40°C to + 85°C
Maximum diameter of 25 mm with velocity 23 m/s
45± 2°C
Temperature range
Hail resistance
NOCT
Packing information
Packing
Quantity (Nos)
Primary box
1
Master box
5