Post on 18-Mar-2018
Indust r y Bu l let in
GLS Thermoplastic Elastomers
GLS Thermoplastic Elastomers
Delivering specialized thermoplastic
elastomer solutions for demanding
healthcare applications
Innovative TPE solutions that provide design freedom, performance enhancement, compliance confidence, and system optimization
Versaflex™ HC Medical Tubing Series• Specialized thermoplastic elastomers offer unique solutions and
offsets to traditional medical tubing materials
• Materials offer exceptional extrusion rates, high clarity grades without plasticizers and grades with high service temperatures
Versaflex™ HC Gaskets & Stoppers Series • Meets European Pharmacopoeia <3.2.9> and USP <381> on
extractables
• No coring, good puncture, and resealability for static stoppers
• Low COF and low stiction for dynamic seals
Versaflex™ CL E Series • High performance solution for bags, bottles and films
• High clarity & flexibility
• Low extractables
Versalloy™ HC Series • These TPV alloys offer exceptional flow, lower shrink rate, and
aesthetics over typical TPVs
• Ideal for medical devices that are designed with long, thin flow paths
• Highly colorable and offer a smooth tactile feel
• Made with Santoprene™ TPV
Standard Healthcare GradesIn addition to our specialized healthcare products, PolyOne offers several general purpose healthcare grades for injection, extrusion and overmolding applications.
Performance-grade Materials • USP VI, ISO 10993-4 and 10993-5 grades
• Formulated without halogens or phthalates
• Grades formulated without plasticizers
• High clarity grades
• Bondability to a variety of substrates
• Customizable
TPE Healthcare Product Selector Guide
GENERAL PROPERTIES TENSILE PROPERTIES REGULATORY
ColorHardness Specific
GravityCompression Set @ 23ºC
Compression Set @ 100ºC
100% Modulus
300% Modulus
Tensile Strength Elongation Tear
Strength
ISO
1099
3*
USP
VI
Special Characteristics
ASTM/ISO Shore A
ASTM/ISOASTM
%ISO %
ASTM/ISO %
ASTM psi
ISO MPa
ASTM psi
ISO MPa
ASTM psi
ISO MPa
ASTM/ISO %
ASTM pli
ISO kN/m
Versaflex™ HC MT Series Medical Tubing Grades
HC MT222 Clear 66A 0.88 14 — — 334 2.30 629 4.34 898 6.19 430 220 36 High Clarity, Without Plasticizers
HC MT224 Clear 75A 0.89 19 — — 468 3.23 773 5.33 1360 9.4 530 321 56 High Clarity, Without Plasticizers
HC MT226 Clear 84A 0.88 20 — — 606 4.17 885 6.1 1600 11.0 600 433 76 High Clarity, Without Plasticizers
HC MT317 Trans. 68A 0.89 17 — 69 450 3.10 660 4.55 870 6.0 470 221 39 Very High Service Temperature
HC MT555 Trans. 54A 0.89 20 — 63 252 1.74 480 3.31 925 6.38 630 181 32 High Service Temperature
Versaflex™ HC Gaskets & Stoppers Grades for Medical Gaskets & Stoppers
HC 2110-35N Natural 34A 0.90 19 — 47 145 1 261 1.80 400 2.76 620 97 17 Resealing
HC 2110-43N Natural 43A 0.98 12 — 46 134 0.92 368 2.54 723 4.98 710 — — Good Compression Set
HC 2110-57B Black 59A 1.01 20 — 37 369 2.54 558 3.85 537 3.7 350 147 26 Low Stiction
Versaflex™ CL E Series Clear Grades, Without Plasticizers, for Medical Films, Bags, And Bottles
CL E85 Clear 84A 0.90 20 — 72 752 5.18 1160 8.0 1550 10.7 450 433 76 High Clarity, Without Plasticizers
CL E90 Clear 90A 0.90 27 — 73 1000 6.89 1230 8.5 1830 12.6 570 — — High Clarity, Without Plasticizers
CL E95 Clear 95A 0.90 38 — 71 1680 11.6 1730 11.9 2500 17.2 580 720 126 High Clarity, Without Plasticizers
Versalloy™ HC 9210 Series Good Processability, Smooth Surface Aesthetics for Healthcare Applications
HC 9210-45N Natural 59A 0.89 19 — 39 160 1.10 320 2.20 484 3.33 480 100 18 Smooth Surface
Aesthetics
HC 9210-55N Natural 53A 0.89 20 — 44 208 1.44 335 2.31 580 4.0 610 120 21 * Smooth Surface Aesthetics
HC 9210-70N Natural 70A 0.89 23 — 53 356 2.45 510 3.52 780 5.38 590 180 32 Smooth Surface
Aesthetics
Versalloy™ HC 9220 Series Fatigue Resistant TPEs for Medical Tubing and Molded Components
HC 9220-70 Natural 70A 0.95 17 — 51 453 3.12 — — 643 4.43 265 208 36 Extrusion Grade
HC 9220-80 Natural 80A 0.94 18 — 59 553 3.67 777 5.36 945 6.52 415 208 36 Extrusion Grade
HC 9220-90 Natural 90A 0.94 25 — 55 1030 8.13 1350 9.33 1945 13.45 620 400 70 Extrusion Grade
Standard Healthcare Grades
Dynaflex™ G2706 Trans. 28A 0.89 8 — — 90 0.62 273 1.88 800 5.52 660 80 14 Translucent, High
Strength
Dynaflex™ G2711 Trans. 43A 0.89 14 — — 180 1.24 370 2.55 778 5.36 640 130 23 Excellent
Colorability
Versaflex™ CL 2242 Clear 43A 0.89 23 — — 152 1.05 294 2.02 731 5.0 780 124 22 High Clarity, Boilable
Versaflex™ CL 2250 Clear 50A 0.89 20 — — 220 1.52 337 2.32 827 5.70 770 140 25 High Clarity, Boilable
Versaflex™ OM Series Overmolding Grades
OM 1040X Trans. 42A 0.92 22 — — 180 1.24 301 2.08 504 3.47 580 100 18 ABS/PC OM
OM 3060 Clear 59A 0.90 33 — — 420 2.9 360 2.48 500 3.45 480 180 32 ABS/PC OM
• Properties shown are typical values and are not intended as product specifications. All properties were measured using natural product unless otherwise specified.• For some products, the black properties will differ slightly from the natural version — refer to product Technical Data Sheet for specific product properties.• The test methods used are modifications of the ASTM/ISO procedures— refer to product Technical Data Sheet for specific testing parameters. • All tests are conducted on injection molded samples.• * Please refer to technical data sheet for complete information.
Copyright © 2010, PolyOne Corporation. PolyOne makes no representations, guarantees, or warranties of any kind with respect to the information contained in this document about its accuracy, suitability
for particular applications, or the results obtained or obtainable using the information. Some of the Information arises from laboratory work with small-scale equipment which may not provide a reliable
indication of performance or properties obtained or obtainable on larger-scale equipment. Values reported as “typical” or stated without a range do not state minimum or maximum properties; consult your
sales representative for property ranges and min/max specifications. Processing conditions can cause material properties to shift from the values stated in the Information. PolyOne makes no warranties
or guarantees respecting suitability of either PolyOne’s products or the Information for your process or end-use application. You have the responsibility to conduct full-scale end-product performance testing
to determine suitability in your application, and you assume all risk and liability arising from your use of the Information and/or use or handling of any product. POLYONE MAKES NO WARRANTIES, EXPRESS
OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, either with respect to the Information or products reflected by the
Information. This data sheet shall NOT operate as permission, recommendation, or inducement to practice any patented invention without permission of the patent owner.
PolyOne Americas33587 Walker Road
Avon Lake, Ohio 44012
United States
+1 440 930 1000
PolyOne AsiaGuoshoujing Road No. 88
Z.J Hi-Tech Park, Pudong
Shanghai, 201203, China
+86 (0) 21 5080 1188
PolyOne Europe6, Giällewee
L-9749 Fischbach
Luxembourg
+32 (0) 83 660 211
www.po lyone.comwww.g lstpes.com
CONTACT INFORMATION
AmericasU.S. - McHenry IL
+1 (815) 385-8500
Brazil - Sao Paulo
+55 (11) 3576-2500
Asia China - Guangzhou
+86 (0) 20 8732 7260
India - Mumbai
+91 9820 194 220
China - Suzhou
+86 512 6265 2600
Hong Kong
+852 2690 5332
Taiwan - Taipei
+886 9396 99740
EuropeGermany - Gaggenau
+49 (0) 7225 6802 0
Spain - Barbastro
+34 (0) 9 7431 0314
Turkey - Istanbul
+90 (0) 212 549 2256
Product choices often vary by region due to differences in regulatory and agency requirements, availability and other key factors. Please contact your nearest sales office for assistance in choosing the right solution for your locale.
No Surprises PledgeSM
At PolyOne, we are committed to helping you grow your business with safe and environmentally sound solutions. This commitment is exemplified by our No Surprises PledgeSM, which we make to all customers and markets across the globe.
You can be confident that, in formulating and manufacturing our materials, we use sustainable practices to provide long-term product viability and sound environmental stewardship.
You can expect that the materials we produce contain only ingredients that conform to accepted legal and regulatory compliance guidelines.
You can trust that PolyOne materials meet the rigorous quality and safety management standards required across the globe.
You can be certain that PolyOne meets or exceeds the material safety data reporting requirements of your country or region.
When you choose PolyOne, you can be confident our products will help you meet or exceed today’s stringent compliance standards.