Post on 09-Aug-2019
GESAMTKATALOGProdukte Technische Daten Grafiken
GENERAL CATALOGUE Products Technical details Charts
42
tubra®-PGS 01
tubra®-PGS-C 01
Bis 26 / 43 m2mit / ohne Regelung
HE-Pumpen optional
For up to 26 / 43 m2 with / without
control. High efficiency pumps upon
request.
tubra®-PGS multi
tubra®-PGS-C multi
Bis 26 / 43 m2mit / ohne Regelung
HE-Pumpen optional
For up to 26 / 43 m2 with / without
control. High efficiency pumps upon
request.
tubra®-PGS XL
tubra®-PGS-C XL
Bis 70 / 116 m2mit / ohne Regelung
HE-Pumpen optional
For up to 70 / 116 m2 with / without
control. High efficiency pumps upon
request.
tubra®-ÜSTA-mat
Bis 30 / 52 m2mit / ohne Regelung
For up to 30 / 52 m2 with / without
control.
tubra®-ÜSTA-mat XL
Bis 75 / 115 / 150 / 230 m2
Kaskaden möglich
Up to 75 /115 / 150 / 230 m2.
Cascadable.
Universelle Pumpengruppen
All-purpose pump stations
Die kompakte Solarstation wälzt zuverlässig die Solarflüssigkeit
zwischen Kollektor und dem Wärmetauscher im Speicher um. Der
integrierte Regler sorgt für bedarfsgerechten Betrieb und sichert
maximalen Ertrag.
The compact solar thermal pump station circulates reliably the solar
thermal liquid between collector and the heat exchanger in the tank.
The integrated electronic control guarantees an ideal operation and
maximum output.
Pumpengruppen mit Wärmetauscher
Pump stations with heat exchanger
Die kompakt konstruierte Wärmetauscherstation dient zur Be-
ladung von Pufferspeichern und ist vorbereitet für den Anschluss an
Solar- und Speicherkreis.
Bei großen Anlagen kann die tubra®-ÜSTA-mat XL kaskadiert werden.
The compact pump stations with heat exchanger for loading buffer
tanks - completely pre-monuted for a direct connection with the
solar thermal and the buffer circuit. The tubra®-ÜSTA-mat XL can be
mounted as a cascade for extra-large systems.
Solararmaturen und Zubehör
Solar thermal accessories
SolarIsolarthermal
43
0 5 10 15 20 30 40 50
Kollektorfläche /surface [m²]
tubra®-PGS 01 [High flow 30 l/m²h]
25 35 45
tubra®-PGS 01 [Low flow 18 l/m²h]
tubra®-PGS-multi [High flow 30 l/m²h]
0 5 10 15 20 30 40 50
Kollektorfläche /surface [m²]
25 35 45
tubra®-PGS-multi [Low flow 18 l/m²h]
tubra®-PGS XL [High flow 30 l/m²h]
0 15 30 45 60 90 120 150
Kollektorfläche /surface [m²]
75 105 135
tubra®-PGS XL [Low flow 18 l/m²h]
tubra®-ÜSTA-mat 30
0 5 10 15 20 30 40 50
Kollektorfläche /surface [m²]
25 35 45
tubra®-ÜSTA-mat 20
55
tubra®-ÜSTA-mat XL 100 / 100 K
0 20 40 60 80 120 160 200
Kollektorfläche /surface [m²]
tubra®-ÜSTA-mat XL 75 / 75 K
240
Seite / page 44
Seite / page 44
Seite / page 49
Seite / page 52
Seite / page 56
Seite / page 59
Einstrang-Solarstation für Warmwasser-Solaranlagen im High-flow-Betrieb für Speicher mit internem Wärme-
tauscher. Optional für Montage direkt am Speicher. / Single-line solar thermal pump station for hot water solar
thermal systems with high flow operation mode and tanks with integrated heat exchanger. Optionally it can be
mounted directly onto the tank.
Zweistrang-Solarstation für vielfältige Anwendungen. Optional für Montage direkt am Speicher. / Double-line solar thermal pump station for multipurpose use. Optionally it can be mounted directly onto the tank.
Zweistrang-Solarstation für große Solaranlagen im Low flow- oder High flow-Betrieb. / Double-line solarthermal pump station for big solar thermal systems with low flow or high flow operation mode.
Übergabestation für Solaranlagen im Low flow-Betrieb (18 l/m2h) mit Edelstahl-Plattenwärmetauscher undUmschaltventilen zur solaren Schichtbeladung. / Solar thermal transfer station for solar thermal systemswith low flow operation mode (18 l/m2h) with heat exchanger in stainless steel and switch valves for a stra-tified charge.
Übergabestation für große Solaranlagen im Low flow-Betrieb (18 l/m2h) mit Edelstahl-Plattenwärmetauscher,kaskadierbar. / Solar thermal transfer station for big solar thermal systems with low flow operation mode (18 l/m2h) with heat exchanger in stainless steel, cascadable.
Praktisches Zubehör und Ersatzteile / Useful accessories and spare parts
44
tubra®-PGS 01
tubra®-PGS multi
Die Pumpengruppen für Solaranlagen auch mit integrierter Regelung
The solar pump station also with integrated electronic control
• Kompakte Modulbauweise / Compact modular construction
• Komplett vormontiert für Anschluss am Solarkreis / Completely pre-mounted for direct installation
• Auf Wunsch mit hocheffizienter Energiesparpumpe / High efficiency pumps upon request
• Unterschiedliche Regler möglich / Different types of electronic controls applicable
• Inkl. tubra®-ISOPACK EPP / tubra® EPP insulation included
In der Solarstation tubra®-PGS multi sind zwei Schwerkraftbremsen, Sicherheitseinrichtungen, Wandbefes-
tigung und Komplett-Isolierung bereits integriert.
Optional sind die Stationen tubra®-PGS-C multi mit vormontierter und vorverdrahteter Regelung erhältlich.
Absperrungen vor und hinter der Pumpe ermöglichen den Austausch ohne Entleerung der Anlage. Zeiger-
thermometer und Schwerkraftbremsen sind in den Betätigungsgriffen bzw. in den Kugelhähnen montiert.
Mittels Betätigung der Hähne können die Schwerkraftbremsen manuell geöffnet werden. Als
Durchflussmengen-Messgerät steht die Ausführung 1 - 13 l/min zur Verfügung. Auch Volumenstromsensoren
im Vortex-Prinzip sind optional erhältlich.
Zur sicheren Entgasung der Anlage ist ein Luftsammler (tubra®-air-jet) mit großem Volumen integriert, der
manuell über den Handentlüfter entleert werden kann. Die erforderlichen Einrichtungen wie Manometer,
Sicherheitsventil und der Anschluss für das Ausdehnungsgefäß sind aufgrund der niedrigen thermischen
Belastung im Rücklauf integriert.
Die Pumpengruppe kann an der Wand aber auch mit optionalem Zubehör direkt am Speicher montiert wer-
den. Auf Wunsch sind alle Ausführungen mit Hocheffizienzpumpe erhältlich.
The solar pump station tubra®-PGS multi incorporates two check valves, safety valves, a wall bracket and a
complete insulation.
The pump station tubra®-PGS-C multi offers additionally a pre-mounted and cabled electronic control.
Shutoffs directly before and after the pump guarantee a fast and simple exchange of the pump without emp-
tying and refilling if necessary. Thermometers are integrated in the ball valve grips. Gravity brakes are inte-
grated directly in the ball valves and can be actuated turning the grips. Flowmeters are available with 1-13
l/min and as vortex sensors.
A safe deaeration of the system is guaranteed by the big manual airvent tubra®-air-jet. Pressure gauge, safety
valves and connections for the expansion vessel are integrated in the return flow due to the lower thermic
load.
A wall bracket is standard but also a set for direct installation at the storage tank is available.
High efficiency pumps are available upon request.
tubra®-PGS 01
tubra®-PGS-C multi
PGS 01
PGS multi, DFM
xx
xx
xx
xx
xx
SolarIsolarthermal
45
tubra®-PGS 01 tubra
®-multi
DN 20 DN 20
13 kW 13 kW
43 m2 43 m2
26 m2 26 m2
405 x 200 x 180 mm 405 x 330 x 180 mm
- 125 mm
6 bar / 10 bar 6 bar / 10 bar
- / 120°C 140 / 120°C
G3⁄4 IG G3⁄4 IG
40 mbar 2 x 20 mbar
1-13 l/min 1-13 l/min
2,5 m 2,5 m
Nenngröße / nominal size
Nennleistung / nominal capacity
Max. Kollektorfläche, Flachkollektor, Low flow (18 l/m2h )
max. collector surface, flate plate, low flow (18 l/m2h )
Max. Kollektorfläche, Flachkollektor, High flow (30 l/m2h )
max. collector surface, flate plate, high flow (30 l/m2h )
Abmessungen H x B x T / dimensions
Achsabstand / centre distance
Max. Betriebsdruck / max. working pressure
Max. Betriebstemperatur VL / RL
max. working temperature flow / return
Anschlüsse / connections
Schwerkraftbremse / gravity brakes
Durchflussmesser* / flowmeter*
Kabellänge der Pumpe bei Solarstation ohne Regelung
length of pump cable for solar stations
without electronic control
Sicherheitsventil / safety valve
Manometer / pressure gauge
Anschluss für Ausdehnungsgefäß / connection for expansion vessel
Spül- und Entleerventil flush and fill valves
Kugelhahn mit integrierter Schwerkraftbremse ball valve with integrated gravity brake
Solarpumpe / solar pump
Spül- und Entleerventil / flush and fill valve
Volumenstrommesser optional: Vortexsensor volumetric flow rate meter optional vortex sensor
Speicherrücklauf storage tank return tube
Kollektorrücklauf collector return tube
Thermometer thermometer
Kugelhahn mit integrierter Schwerkraftbremse ball valve with integrated gravity brake
tubra®-air-jetEntlüftertopfmit Handentlüfter tubra®-air-jet manual air vent
Speichervorlauf storage tank flow tube
Kollektorvorlauf collector flow tube
*Andere Volumenstromsensoren (Vortex VFS, VFD etc.) auf Anfrage / *Other volumetric flow sensors (e.g. Vortex VFS, VFD) upon request
tubra®-PGS-01 oder / ortubra®-PGS multiRegelung / electronic controlResol DeltaSol® CS plusSteca TR 0301Steca TR A502 TT
tubra®-PGS-01 und / andtubra®-PGS multi Regelung / electronic controlResol DeltaSol® CS plusSteca TR A502 TT
tubra®-PGS 01 oder / or tubra®-PGS multi tubra®-UVRegelung / electronic controlResol DeltaSol® CS plusSteca TR A502 TT
tubra®-PGS-01 oder / ortubra®-PGS multiRegelung / electronic controlResol DeltaSol® CS plusSteca TR A502 TT
46
tubra®-PGS 01
tubra®-PGS multi
Artikel / article
tubra®-PGS 01
Einstrang-Solarstation ohne Regelung
Single-line solar thermal pump station
without electronic control.
tubra®-PGS-C 01
Einstrang-Solarstation mit Regelung.
Single-line solar thermal pump station
with electronic control.
tubra®-PGS multi
Zweistrang-Solarstation ohne Regelung.
Double-line solar thermal pump station
without electronic control.
tubra®-PGS-C multi
Zweistrang-Solarstation mit
Regelung Resol CS plus.
Double-line solar thermal pump
station with electronic control
Resol CS plus.
tubra®-PGS-C multi
Zweistrang-Solarstation mit
Regelung Steca TR A502 TT.
Double-line solar thermal pump
station with electronic control
Steca TR A502 TT.
tubra®-PGS-C multi
Zweistrang-Solarstation mit
Regelung Steca TR 0301.
Double-line solar thermal pump
station with electronic control
Steca TR 0301.
Typ / type
Wilo St 15/6 Eco
Wilo Yonos Para 15/7.0
Grundfos Solar 15-65
Wilo Yonos Para 15/7.0
Resol DeltaSol CS plus
Wilo Yonos Para 15/7.0
Steca 0502 TT
Wilo St 15/6 Eco
Wilo St 15/7 Eco
Wilo Yonos Para 15/7.0
Grundfos Solar 15-65
Grundfos PM2 15-105
Wilo St 15/6 Eco
Wilo St 15/7 Eco
Wilo Yonos Para 15/7.0
Grundfos Solar 15-65
Grundfos PM2 15-105
Wilo Yonos Para 15/7.0
Grundfos PM2 15-105
Wilo Yonos Para 15/7.0
Grundfos PM2 15-105
Art.-Nr.
677.10.60.00
976.10.00.00
677.10.65.00
977.10.00.00
977.11.00.00
677.15.60.00
677.15.20.00
976.15.00.00
677.14.10.00
976.15.10.00
677.16.90.00
677.13.20.00
977.15.00.00
677.14.20.00
977.15.05.00
977.15.10.00
977.15.15.00
977.15.20.00
977.15.25.00
SolarIsolarthermal
47
Artikel / article
tubra®-PGS 01 Zubehör accessories
tubra®-Vorlaufabsperrung PGS 01
Vorlaufkugelhahn mit Entleerung und
Schwerkraftbremse als Ergänzung zur
tubra®-PGS 01.
Flow ball valve with drain and gravity
brake as upgrade for tubra®-PGS 01.
Speicheranschlussset PGS 01
Zur Verbindung von Solarstation zu
Speicher mit G1 AG.
Tank connecting set
For connecting the pump station
with the tank with G1 AG.
tubra®-PGS multi Zubehör accessories
Speicheranschluss-Set horizontal
Zur Anbindung der Solarstation direkt an
den Speicher. Passend für Speicher mit
horizontal angeordneten Anschlüssen in
G1 AG mit 125 mm Achsabstand.
Tank connecting set vertical
For connecting the pump station with the
tank with vertical connections in G1 AG,
distances 600 to 900 mm,
with telescopic tube.
Speicheranschluss-Set vertikal
Zur Anbindung der Solarstation direkt an
den Speicher. Passend für Speicher mit
vertikal angeordneten Anschlüssen in G1
AG inkl. Teleskoprohr.
Abstand 600 bis 900 mm.
Tank connecting set vertical
For connecting the pump station with the
tank with vertical connections in G1 AG,
distances 600 to 900 mm, with telescopic
tube.
Typ / type
G3⁄4 IG - G1 AG
G3⁄4 PTFE - ÜWM G1
G3⁄4 PTFE - ÜWM G1
G3⁄4 PTFE - ÜWM G1
Art.-Nr.
676.10.35.00
676.10.55.00
677.15.90.00
676.15.70.00
48
tubra®-PGS 01
tubra®-PGS multi
Artikel / article
Umschalteinheit
Für Solarspeicher mit 2 internen Wärme-
tauschern zur Umschaltung von oben
nach unten inkl. Umschaltventil mit
Stellmotor.
Switch unit
For solar thermal tanks with 2 integrated
heat exchangers for switching from top to
bottom, including switch valve with actua-
tor.
Doppelnippel
selbstdichtend x flachdichtend.
1 VPE = 2 Stück
Double nipple
self- and flat-sealing.
1 packaging unit = 2 pieces
Klemmringverschraubung
für Cu-Rohr.
1 VPE = 2 Stück
Compression fitting for tube in Cu.
1 packaging unit = 2 pieces
tubra®-ET KH PGS multi
Ersatzteil Kugelhähne für tubra®-PGS multi
mit integrierter Schwerkraftbremse und
Thermometer im Griff.
Ball valves for tubra®-PGS multi
with integrated gravity brake and thermo-
meter integrated into the handle.
Thermometer
Ersatzteil zum Einstecken in
Kugelhahngriffe Ø 50 mm.
Max. 120°C
Thermometer
Spare part for plugging onto the ball val-
ve's handle Ø 50 mm.
Max. 120°C
Typ / type
DN 20, 4 x ÜWM G1
G3⁄4 PTFE - G3⁄4 AG
G3⁄4 PTFE - G1 AG
G3⁄4 AG x 15 mm
G3⁄4 AG x 18 mm
G3⁄4 AG x 22 mm
VL, roter Griff
flow. red handle
RL, blauer Griff
return flow, blue handle
Ø 7 mm x 47 mm
Art.-Nr.
auf Anfrage
upon request
676.24.18.00.01
677.20.10.00
677.20.15.00
677.20.18.00
677.20.22.00
678.01.31.00
678.01.33.00
665.24.25.00
SolarIsolarthermal
49
tubra®-PGS XL
tubra®-PGS-C XL
Die Pumpenstationen für große Solaranlagen auch mit integrierter Regelung
The solar pump station for big systems also with integrated electronic control
• Kompakte Modulbauweise / Compact modular construction
• Komplett vormontiert für Anschluss am Solarkreis / Completely pre-mounted for direct installation
• Inkl. tubra®-ISOPACK EPP / tubra® EPP insulation included
In der Solarstation tubra®-PGS XL sind zwei Schwerkraftbremsen, Sicherheitseinrichtungen, Wandbefes-
tigung und Komplett-Isolierung bereits integriert. Optional sind die Stationen tubra®-PGS-C XL mit vormon-
tierter und vorverdrahteter Regelung erhältlich. Absperrungen vor und hinter der Pumpe ermöglichen den
Austausch ohne Entleerung der Anlage.
Zeigerthermometer und Schwerkraftbremsen sind in den Betätigungsgriffen bzw. in den Kugelhähnen mon-
tiert. Mittels Betätigung der Hähne können die Schwerkraftbremsen manuell geöffnet werden. Als Durch-
flussmengen-Messgerät steht die Ausführung 5-35 l/min zur Verfügung. Auch Volumenstromsensoren im
Vortex-Prinzip sind optional erhältlich. Zur sicheren Entgasung der Anlage ist ein Luftsammler (tubra®-air-jet)
mit großem Volumen integriert, der manuell über den Handentlüfter entleert werden kann. Die erforderlichen
Einrichtungen wie Manometer, Sicherheitsventil und der Anschluss für das Ausdehnungsgefäß sind aufgrund
der niedrigen thermischen Belastung im Rücklauf integriert. Die Pumpengruppe kann an der Wand montiert
werden. Auf Wunsch sind alle Ausführungen mit Hocheffizienzpumpe erhältlich.
The solar pump station tubra®-PGS XL incorporates two gravity brakes, safety valves, a wall bracket and a
complete insulation. The pump station tubra®-PGS-C XL offers additionally a pre-mounted and cabled elec-
tronic control. Shutoffs directly before and after the pump guarantee a fast and simple exchange of the pump
without emptying and refilling if necessary.
Thermometers are integrated in the ball valves’ grips. Gravity brakes are integrated directly in the ball valves
and can be actuated turning the grips. Flowmeters are available with 5-35 l/min and as vortex sensors. A safe
deaeration of the system is guaranteed by the big manual airvent tubra®-air-jet. Pressure gauge, safety val-
ves and connections for the expansion vessel are integrated in the return flow due to the lower thermic load.
A wall bracket is standard. High efficiency pumps are available upon request.
xx
xx
xx
xx
tubra®-PGS XL
tubra®-PGS-C XL
Sicherheitsventil / safety valve
Manometer / pressure gauge
Anschluss für Ausdehnungsgefäß / connection for expansion vessel
Spül- und Entleerventil
flush and fill valves
Kugelhahn mit integrierter Schwerkraftbremse
ball valve with integrated gravity brake
Solarpumpe / solar pump
Spül- und Entleerventil / flush and fill valve
Volumenstrommesser optional: Vortexsensor
volumetric flow rate meter optional vortex sensor
Speicherrücklauf
storage tank return tube
Kollektorrücklauf
collector return tube
Thermometer
thermometer
Kugelhahn mit integrierter
Schwerkraftbremse
ball valve with
integrated gravity brake
tubra®-air-jet
Entlüftertopf
mit Handentlüfter
manual air vent
Speichervorlauf
storage tank flow tube
Kollektorvorlauf
collector flow tube
50
tubra®-PGS XL
Regelung / electronic control
Resol DeltaSol®Bx plus
2 x tubra®-PGS XL
Regelung / electronic control
Resol DeltaSol®Bx plus
tubra®-PGS XL
und / and tubra®-UV
Regelung / electronic control
Resol DeltaSol®Bx plus
tubra®-PGS XL und / and
Regelung / electronic control
Resol DeltaSol®Bx plus
tubra®-PGS XL
DN 25
35 kW
116 m2
70 m2
470 x 380 x 215 mm
125 mm
6 bar / 10 bar
140 / 120 °C
G1 IG
2 x 20 mbar
5-35 l/min
2,5 m
Nenngröße / nominal size
Nennleistung / nominal capacity
Max. Kollektorfläche, Flachkollektor, Low flow (18 l/m2h )
max. collector surface, flate plate, low flow (18 l/m2h )
Max. Kollektorfläche, Flachkollektor, High flow (30 l/m2h )
max. collector surface, flate plate, high flow (30 l/m2h )
Abmessungen H x B x T / dimensions
Achsabstand / centre distance
Max. Betriebsdruck / max. working pressure
Max. Betriebstemperatur VL / RL
max. working temperature flow / return
Anschlüsse / connections
Schwerkraftbremse / check valves
Durchflussmesser* / flowmeter*
Kabellänge der Pumpe bei Solarstation ohne Regelung
length of pump cable for solar station
without electronic control
*Andere Volumenstromsensoren (Vortex VFS, VFD etc.) auf Anfrage / *Other volumetric flow sensors (e.g. Vortex VFS, VFD) upon request
tubra®-PGS XLtubra®-PGS-C XL
So
lar
Iso
lar
ther
mal
51
Artikel / article
tubra®-PGS XL
Zweistrang-Solarstation
ohne Regelung
Double-line solar pump station
without electronic control
tubra®-PGS-C XL
Zweistrang-Solarstation
mit Regelung Resol DeltaSol Bx plus
Double-line solar thermal pump
station with electronic control Resol
DeltaSol Bx plus
tubra®-PGS XL Zubehör / accessories
Doppelnippel
selbstdichtend x flachdichtend
1 VPE = 2 Stück
Double nipple
self- and flat-sealing
1 packaging unit = 2 pieces
tubra®-ET KH PGS XL
Ersatzteil Kugelhähne für tubra®-PGS XL
mit integrierter Schwerkraftbremse und
Thermometer im Griff.
Spare ball valves for tubra®-PGS XL with
integrated gravity brake and thermometer
integrated into the handle.
Thermometer
Ersatzteil zum Einstecken in
Kugelhahngriffe Ø 50 mm.
Max. 120°C
Thermometer
Spare part for plugging onto
the ball valve's
handle Ø 50 mm
Max. 120°C
Typ / type
Wilo ST 15/8 ECO
Wilo Stratos Para 15/1-11,5
Wilo Yonos Para
15/7.5 PWM2
Grundfos Solar PM2
15-105 PWM2
Wilo Stratos Para 15/1-11,5
Wilo Yonos Para
15/7.5 PWM2
Grundfos Solar PM2 15-105
G1 PTFE - G1 AG
VL, roter Griff
VL, red handle
RL, blauer Griff
RL, blue handle
Ø 7 mm x 47 mm
Art.-Nr.
677.25.40.00
677.25.50.00
976.25.00.00
976.25.05.00
677.25.00.00
977.25.00.00
977.25.05.00
665.25.19.00.01
677.25.08.00.01
677.25.09.00.01
665.24.25.00
52
• Kompakte Modulbauweise / Compact modular construction
• mit Hocheffizienzpumpen / With high efficiency pumps
• Optional mit Vortex Sensor / Vortex-sensor upon request
Höchste Effizienz für solare Raumwärme zeichnet die Übergabestation tubra®-ÜSTA-mat aus. Die kompakt
konstruierte Wärmetauscherstation dient zur Schichtenladung eines Pufferspeichers über Umschaltventile
und ist bereits komplett vormontiert für den Anschluss an Solar- und Speicherkreis. Über zwei
Temperaturfühler im Pufferspeicher kann die Schichtladung auf den Speicher angesteuert werden. Die bei-
den montierbaren Fühler und die integrierte Regelung sind Garant für die optimale Ansteuerung der Um-
schaltventile. Die Station ist mit je einer Sicherheitseinheit auf der Primär- und Sekundärseite ausgestattet.
Spezielle integrierte Halterungen ermöglichen eine einfache Wandmontage.
The tubra®-ÜSTA-mat transfer station guarantees highest profit of solar thermal energy. The compact stati-
on is used for a stratified charge of buffer tanks with the help of switch valves. It is completely premounted
for the direct installation of the solar thermal and the storage circuit. The ideal charge of the buffer tank is
controlled by two sensors and the electronic control which actuate the two switch valves. The station is
equipped with a security group on the primary as well as on the secondary side. Special wall brackets are
integrated for a quick and simple wall mounting.
tubra®-ÜSTA-matDie solare Übergabestation zur Schichtbeladung
The solar thermal transfer station for a stratified charge
xx
tubra®-ÜSTA-mat C
tubra®-ÜSTA-mat
So
lar
Iso
lar
ther
mal
53
tubra® -ÜSTA-mat 20 tubra®-ÜSTA-mat 30
DN 20 DN 20
15 kW 26 kW
30 m2 52 m2
Wilo Yonos Para Wilo Yonos Para
15/7.0 15/7.0
Wilo Yonos Para Wilo Yonos Para
15/7.0 15/7.0
935 x 425 x 395 mm 935 x 425 x 395 mm
6 bar 6 bar
3 bar 3 bar
140 / 120 °C 140 / 120 °C
110 °C 110 °C
G3⁄4 IG G3⁄4 IG
G1 AG, flachdichtend G1 AG, flachdichtend
G1 ext., flat sealing G1 ext., flat sealing
1-16 l/min 1-16 l/min
1-16 l/min 1-16 l/min
20 mbar 20 mbar
Nenngröße / nominal size
Nennleistung / nominal capacity
Low flow (18 l/m2h), max 7K log Diff.
prim. 60-34 °C/ sek. 27-53 °C
Max. Kollektorfläche (Flachkollektor)
max. collector surface (flate plate)
Solarpumpe (Primärseite)
solar pump (primary side)
Speicherladepumpe (Sekundärseite)
buffer load pump (secondary side)
Abmessungen H x B x T / dimensions
Max. Betriebsdruck primär
max. working pressure (primary)
Max. Betriebsdruck sekundär
max. working pressure (secondary)
Max. Betriebstemperatur primär VL/RL
max. working temperature primary flow / returnMax.
Betriebstemperatur sekundär
max. working temperature secondary
Anschlüsse primär / connections (primary)
Anschlüsse sekundär
connections (secondary)
Durchflussmesser primär
flow meter (primary)
Durchflussmesser sekundär
flow meter (secondary)
Schwerkraftbremse / gravity brake
Kollektorvorlaufcollector flow tube
Kugelhähne mit integrier-tem Thermometerball valves with integratedthermometersHeizungs-Sicherheitsventilheating security valve
Umschaltventil switch valveSpeicher obenbuffer tank upper part
Speicher mitte buffer tank central part
Speicher unten buffer tank lower part
Umschaltventil switch valve
Speicherladepumpe buffer loading pump
Kollektorrücklaufcollector return tubeSicherheitsgruppe mitSolar-Sicherheitsventil,Manometer und An-schluss für Ausdeh-nungsgefäß security group withsolar security valve,pressure gauge and connection for expansi-on vesselSchwerkraftbremsegravity brake
Solarpumpe solar pump
Spül- und Befüllarmaturmit Absperr-Kugelhahn flush and fill valve withstop valve
Volumenstrommesser volumetric flow meter
Plattenwärmetauscher heat exchanger
tubra®-ÜSTA-mat Ctubra®-ÜSTA-mat
tubra®-ÜSTA-mat C
54
tubra®-ÜSTA-mat
Typ / type
prim. Wilo Yonos
Para 15/7.0 PWM2
sek. Wilo Yonos
Para 15/7.0 PWM2
prim. Wilo Yonos
Para 15/7.0 PWM2
sek. Wilo Yonos
Para 15/7.0 PWM2
prim. Wilo Yonos
Para 15/7.0 PWM2
sek. Wilo Yonos
Para 15/7.0 PWM2
prim. Wilo Yonos
Para 15/7.0 PWM2
sek. Wilo Yonos
Para 15/7.0 PWM2
Art.-Nr.
910.20.00.00
910.30.00.00
910.22.00.00
910.32.00.00
Artikel / article
tubra®-ÜSTA-mat C 20
Übergabestation für bis zu 30 m2 Kollektor-
fläche (Flachkollektor) mit Umschaltventilen
zur Schichtbeladung von Pufferspeichern,
Regelung Resol DeltaSol® Bx plus
Transfer station for up to 30 m2 collector sur-
face (flat collector) with switch valves for a
stratified charge of buffer tanks.
Electronic control Resol DeltaSol Bx plus
tubra®-ÜSTA-mat C 30
Übergabestation für bis zu 52 m2 Kollektor-
fläche (Flachkollektor) mit Umschaltventilen
zur Schichtbeladung von Pufferspeichern,
Regelung Resol DeltaSol® Bx plus
Transfer station for up to 52 m2 collector
surface (flat collector) with switch valves for
a stratified charge of buffer tanks.
Electronic control Resol DeltaSol Bx plus
tubra®-ÜSTA-mat 20
Übergabestation bis zu 30 m2 Kollektor-
fläche (Flachkollektor) ohne Umschalt-
ventilen zur Schichtbeladung von
Pufferspeichern, ohne Regelung.
Transfer station for up to 30 m2 collector
surface (flat collector) for a stratified charge
of buffer tanks, without switch valves and
without electronic control
tubra®-ÜSTA-mat 30
Übergabestation für bis zu 52 m2 Kollektor-
fläche (Flachkollektor) ohne Umschaltventile
zur Schichtbeladung von Pufferspeichern,
ohne Regelung.
Transfer station for up to 52 m2 collector
surface (flat collector) for a stratified charge
of buffer tanks, without switch valves and
without electronic control
So
lar
Iso
lar
ther
mal
55
tubra®-ÜSTA-mat Zubehör / accessories
Artikel / article
Absperrhähne-Set
Zur einfachen Montage der heizungsseiti-
gen Anschlüsse bestehend aus je 3
Kugelhähnen mit Verlängerung und Über-
wurfmutter.
Set of shut off valves
For an easy connection of the heating
side. Comprises three ball valves with
lengthening piece and and union nuts.
tubra®-air-jet
Luftsammler zur effektiven Entgasung von
Solarsystemen. Problemlose Nachrüstung
für ÜSTA-mat möglich.
Air vent for an effective de-aeration of solar
thermal systems. Easy retrofitting for ÜSTA-
mat.
tubra®-ÜSTA Umschaltventil
Dreiwege-Umschaltventil mit Stellmotor
als Ersatzteil für ÜSTA-mat.
2-Punkt Ansteuerung mit
Federrückführung
Anschlussspannung: 230 V, 50 Hz
Max. 110 °C, PN 6
Differenzdruck: max. 0,4 bar
Three-way switch valve with actuator as
spare part for tubra®-ÜSTA-mat.
With two-step control with spring return.
Voltage: 230 V, 50 Hz
Max. 110 °C, PN 6
Differential pressure: max. 0,4 bar
Typ / type
Rp3⁄4 x ÜWM G1
G3⁄4 IG x ÜWM G1
DN 20, kvs 7,8
Art.-Nr.
600.36.85.00
677.02.35.00
600.31.65.00
56
tubra®-ÜSTA-mat XLDie Pumpengruppen für große Solaranlagen
The solar pump station for big systems
• Kompakte Modulbauweise / Compact modular construction
• Starke Leistung auf kleinstem Raum / High performance on little space
• mit Hocheffizienzpumpen / With high efficiency pumps
• Optional mit Vortex Sensor / Vortex-sensor upon request
Die tubra®-ÜSTA-mat XL ist eine solare Übergabestation mit Plattenwärmetauscher für Solaranlagen bis zu
230 m2 Kollektorfläche (Flachkollektor). Die kompakte Einheit enthält alle relevanten Sicherheitseinrichtungen
auf der Speicherseite und auf der Solarseite. Die Spüleinrichtung sorgt für eine einfache Inbetriebnahme. Die
integrierte und vorverdrahtete Regelung stellt eine schnelle Montage und den störungsfreien Betrieb sicher.
Modernste Vortex-Sensorik (optional), die hocheffizienten Energiesparpumpen und der leistungsstarke
Edelstahl-Plattenwärmetauscher sorgen bei der tubra®-ÜSTA-mat XL für einen größtmöglichen Solarertrag
bei Low-Flow-Betrieb (18 l/m2 h). tubra®-ÜSTA-mat XL ist kaskadierbar und vorbereitet zur Schichtbeladung
über Umschaltventile.
The tubra®-ÜSTA-mat XL is a transfer station with integrated heat exchanger for solar thermal systems with
a collector surface of up to 230 sqm (flat collector). The compact station contains all necessary safety featu-
res on the solar thermal and the storage circuit. The flush valve helps with an easy start-up. The pre-moun-
ted and pre-cabled electronic control guarantees a quick installation and smooth operations. The combina-
tion of most recent vortex sensors (optional), the high efficiency pumps and the powerful stainless steel heat
exchanger allow a maximum solar thermal output of the tubra®-ÜSTA-mat XL operated in low-flow mode
(18 l/m2 h). tubra®-ÜSTA-mat XL is cascadable and prepared for a stratified charge of buffer tanks with the
help of switch valves.
xx
xx
tubra®-ÜSTA-mat XL
SolarIsolarthermal
57
Speichervorlauf
buffer tank flow tube
Thermometer thermometer
Kugelhahn mit integrierterSchwerkraftbremse
ball valves with inte-
grated gravity brake
Speicherladepumpe
loading pump
Volumen-strommesser
flow sensor
Heizungs-sicherheitsventil
safety valve
Thermometer thermometer
Solarsicherheits-ventil / safty valve
Spül- undEntleerventil flush and fill valve
Volumenstrom-messer volumetric flowmeter
Speicherrücklauf buffer tank return tube
tubra®-air-jetmit Handentlüfter manual air vent
Solarpumpesolar pump
Plattenwärmetauscher heat exchanger
Kollektorvorlauf collector flow tube
Kollektorrücklauf
collector return tube
Anschluss fürSolarausdehn-ungsgefäß connection forexpansion vessel
Manometerpressure gauge
ÜSTA-mat XL 75 ÜSTA-mat XL 100
DN 25 DN 25
75 / 150 m2 115 / 230 m2
38 / 76 kW 50 / 100 kW
Wilo Yonos Para Wilo Yonos Para
15/7.5 15/7.5
Wilo Yonos Para Wilo Yonos Para
25/7.0 25/7.0
760 x 785 x 280 mm 760 x 785 x 280 mm
6 bar 6 bar
3 bar 3 bar
140 / 120 °C 140 / 120 °C
110 °C 110 °C
G1 IG G1 IG
G1 IG G1 IG
5-35 l/min, 5-35 l/min,
Optional Optional
Vortex-Sensor Vortex-Sensor
5-35 l/min 5-35 l/min
je 20 mbar je 20 mbar
a' 20 mbar a' 20 mbar
Nenngröße / nominal size
Max. Kollektorfläche / kaskadiert (Flachkollektor)
max. collector surface / cascaded (flate plate)
Nennleistung / nominal capacity
bei Low flox (18 l/m2h), max 7K log Diff.
prim. 60-34 °C/ sek. 27-53 °C
Solarpumpe (Primärseite)
solar pump (primary side)
Speicherladepumpe (Sekundärseite)
buffer load pump (secondary side)
Abmessungen H x B x T / dimensions
Max. Betriebsdruck primär
max. working pressure (primary)
Max. Betriebsdruck sekundär
max. working pressure (secondary)
Max. Betriebstemperatur primär VL/RL
max. working temperature primary flow / return
Max. Betriebstemperatur sekundär
max. working temperature secondary
Anschlüsse primär / connections (primary)
Anschlüsse sekundär
connections (secondary)
Durchflussmesser primär
flow meter (primary)
Durchflussmesser sekundär
flow meter (secondary)
Schwerkraftbremse / gravity brakes
tubra®-ÜSTA-mat-C XL tubra®-ÜSTA-mat-C XLund / andtubra®-ÜSTA-mat XL
58
tubra®-ÜSTA-mat XL
Artikel / article
tubra®-ÜSTA-mat XL 75
Übergabestation für bis zu 75 m2
Kollektorfläche (Flachkollektor) zur
Beladung von Pufferspeichern
Transfer station for up to 75 m2
collector surface (flat collector) for
charging buffer tanks.
tubra®-ÜSTA-mat XL 100
Übergabestation für bis zu 115 m2
Kollektorfläche (Flachkollektor) zur
Beladung von Pufferspeichern
Transfer station for up to 115 m2
collector surface (flat collector) for
charging buffer tanks.
tubra®-ÜSTA-mat-C XL 75
Übergabestation für bis zu 75 m2
Kollektorfläche (Flachkollektor) zur
Beladung von Pufferspeichern
mit Regelung DeltaSol® Bx Plus
Transfer station for up to 75 m2
collector surface (flat collector) for
charging buffer tanks with electronic
control Resol DeltaSol Bx plus.
tubra®-ÜSTA-mat-C XL 100
Übergabestation für bis zu 115 m2
Kollektorfläche (Flachkollektor) zur
Beladung von Pufferspeichern
mit Regelung DeltaSol® Bx Plus
Transfer station for up to 115 m2
collector surface (flat collector) for
charging buffer tanks with electronic
control Resol DeltaSol Bx plus.
tubra®-Zubehör / accessories
tubra®-UV
3-Wege-Umschaltventil mit Stellmotor
Three-way switch valve with actuator.
tubra®-ZV
Zonenventil mit Stellantrieb
Zone valve with actuator.
Typ / type
prim. Wilo Yonos
Para 15/7.5
sek. Wilo Yonos
Para 25/7.0
prim. Wilo Yonos
Para 15/7.5
sek. Wilo Yonos
Para 25/7.0
prim. Wilo Yonos
Para 15/7.5
sek. Wilo Yonos
Para 25/7.0
prim. Wilo Yonos
Para 15/7.5
sek. Wilo Yonos
Para 25/7.0
DN 32, 3 x Rp11⁄4
DN 25, Rp1
DN 32, Rp11⁄4
Art.-Nr.
900.27.50.00
900.28.50.00
900.25.10.00
900.26.10.00
674.32.50.00
674.26.00.00
674.33.00.00
SolarIsolarthermal
59
tubra®-Solararmaturen und Zubehörsolar thermal accessories
bieten optimale Funktion kombiniert mit Zuverlässigkeit und Montagefreundlichkeit
offer ideal features, reliability and are easy to install
Typ / type
DN 20
G1 AG -ÜWM G1
DN 20, 20 mbar
2 x G3⁄4 IG
G1 IG - ÜWM G1
G3⁄4 IG - ÜWM G1
G3⁄4 - ÜWM G1, 1-13 l/min
G1 - ÜWM G1, 5-35 l/min
G3⁄8 PTFE
G1⁄2 PTFE
Art.-Nr.
676.01.19.00
600.14.55.00
677.25.20.00.01
677.02.35.00
676.15.78.00.01
677.25.31.00.01
676.00.10.00
584.12.54.00.01
Artikel / article
tubra®-Spüleinheit
zur einfachen Befüllung und zum Durch-
spülen des Solarkreislaufes inkl. 2 KFE-
Hähnen
tubra®-flush and fill unit
For an easy filling and flushing of the solar
thermal circuit, includes two flush
and fill valves.
tubra®-SKB
Schwerkraftbremse zum Nachrüsten bei
hohen Anlagen.
Passend für PGS 01, PGS multi und
ÜSTA-mat.
Gravity brakes for a retrofit in high
systems. Apt for tubra®-PGS 01, -PGS
multi and -ÜSTA-mat.
tubra®-air-jet
Luftsammler zur effektiven Entgasung von
Solarsystemen.
Air vent for an effective de-aeration of
solar thermal systems.
Durchflussmesser / Flow meter
Schwebekörper für Solaranwendung
Max. 120 °C
Float for solar thermal installations.
Max. 120 °C
KFE-Hahn Solar
Zum Füllen und Entleeren von Solar-
systemen inkl. Schlauchtülle und
Verschlusskappe Max. 120 °C, PN 6
mit selbstichtendem Außengewinde mit
PTFE Dichtung
Solar thermal flush and fill valve, includes
hose fitting and tap. Max. 120 °C, PN 6
with self-sealing male thread with PTFE
sealing
60
tubra®-Solararmaturen und Zubehörsolar thermal accessories
Typ / type
DN 20, kvs 7
DN 25, kvs 10
DN 32, kvs 15
DN 15
DN 20
DN 25
DN 32
Panzerschlauch-Schlauch
armoured hoses
DN 20 x 500 mm
DN 20 x 1000 mm
Wellrohrschlauch
corrugated hose
DN 16 x 485 mm
DN 16 x 607 mm
DN 20
Für MAG bis 35 Liter
for expansion vessel
up to 35 l
Art.-Nr.
674.20.50.00
674.25.50.00
674.31.50.00
674.13.00.00
674.21.00.00
674.26.00.00
674.33.00.00
686.21.50.00
686.21.00.00
684.19.90.00
684.19.95.00
676.00.93.00
676.00.95.00
Artikel / article
tubra®-UV
Dreiwege-Umschaltventil mit Stellmotor,
2-Punkt-Ansteuerung mit Dauerspannung
Anschlussspannung: 230 V, 50 Hz
Max. 110 °C, PN 6
Differenzdruck: max. 0,4 bar
Schaltzeit: 18 s/90°
Three-way switch valve with actuator,
two-step control with permanent voltage
Voltage: 230 V, 50 Hz
Max. 110 °C, PN6
Differential pressure: max. 0,4 bar
Cycle time: 18s/90°
tubra®-ZV
Zonenventil für Solar- und
Heizungsbereich inkl. Stellmotor
Anschlussspannung: 230 V/50 Hz
Stellzeit: 30 s/90°
Max. 110 °C, PN 16
Zone valve for solar thermal
and heating installations,
includes actuator
Voltage: 230 V / 50 Hz
Cycle time: 30s/90°
Max. 110 °C, PN16
tubra®-MAG Anschluss-Set
bestehend aus tubra®-Veku-fix, Wandhalter,
MAG-Anschlussschlauch mit beidseitiger
Überwurfmutter, flachdichtend.
tubra®-MAG connection set
Includes tubra®-Veku-fix, wall bracket, tube
for expansion vessel with union nut on both
sides, self-sealing
tubra®-VeKu-Fix-E
Ventilkupplung mit Entleerung
für Anschluss an MAG Max. 120 °C
Valve coupling with drain for connection
with expansion vessel
Wandhalter für MAG
Inkl. Befestigungsschrauben und Dübel
Wall-mountin set for expansion vessel,
with screws and dowels
SolarIso
larthermal
61
Typ / type
G3⁄4 PTFE - G3⁄4 AG
G3⁄4 PTFE - G1 AG
G1 PTFE - G1 AG
G3⁄4 AG x 15 mm
G3⁄4 AG x 18 mm
G3⁄4 AG x 22 mm
G3⁄8 AG
G1⁄2 AG
G1⁄4 PTFE
G3⁄8 IG x G3⁄8 AG
G3⁄8 IG x G1⁄2 AG
G1⁄4 IG x G3⁄8 PTFE
DN 15, 6 bar Rp1⁄2
DN 15, 10 bar Rp1⁄2
DN 20, 6 bar Rp3⁄4
Art.-Nr.
676.24.18.00.01
677.20.10.00
665.25.19.00.01
677.20.15.00
677.20.18.00
677.20.22.00
559.10.00.00
559.14.00.00
559.10.88.00
676.01.83.00
559.03.10.00.01
559.03.14.00.01
465.08.20.00
855.51.36.00.01
855.51.31.00.01
855.51.32.00.01
Artikel / article
Doppelnippel
selbstdichtend x flachdichtend
1 VPE = 2 St.
double nipple shortened
self- and flat-sealing
1 packaging unit = 2 pieces
Klemmringverschraubung
für Cu-Rohr, Gewinde selbstdichtend
mit PTFE
1 VPE = 2 St.
Compression fitting for tube
in Cu, thread self-sealing with PTFE
1 packaging unit = 2 pieces
tubra®-solar-fix
Solar-Präzisionsentlüfter mit Absperr-
automat, Hochtemperatur
Max. 160 °C, PN 10
Precision solar thermal air vent with lock
off device, high temperature
max. 160 °C, PN 10
Oberteil für tubra-solar®-fix
Upper part tubra-solar®-fix
Manometer bis 10 bar
Max. 120 °C
Manometer for up to 10 bar
Absperrautomat
für Entlüfter und Manometer
Lock off device for air vents
and manometers.
Sicherheitsventil
Safety valve
62
tubra®-Solararmaturen und Zubehörsolar thermal accessories
Regler
Resol DeltaSol®
CS plus
Differenztemperaturregler für Solaranlagen
4 Eingänge für Temperaturfühler
1 Eingang für Grundfos Direct Sensor VFD
2 Relaisausgänge
2 Ausgänge PWM für die drehzahlgeregelte
Ansteuerung von Hocheffizienzpumpen
Inkl. 2 Temperaturfühler
Solar controller
4 inputs for temperature sensors
1 inputs for VFD Grundfos Direct Sensor™
2 semiconductor relays
2 PWM outputs
incl. 2 temperature sensors Pt1000
Resol DeltaSol®
Bx plus
Solar- und Systemregler
8 Eingänge für Temperaturfühler
2 Eingang für Grundfos Direct Sensor VFD
5 Relaisausgänge
2 PWM-Ausgänge für die drehzahlgeregel-
te Ansteuerung von Hocheffizienzpumpen
2 Ausgänge PWM SD-Karte für
Datenaufzeichnung und Datensicherung
Inkl. 4 Temperaturfühler
Solar & system controller
8 inputs for temperature sensors,
1 impulse input,
2 inputs for digital Grundfos Direct
Sensors™,
1 input for a CS10 irradiation sensor
4 semiconductor relays, 1 potential-free
relay,
2 PWM outputs
Data logging, storing and firmware
updates via SD memory card
incl. 4 temperature sensors Pt1000
Steca TR 0301
Differenztemperaturregler für
Solaranlagen
3 Eingänge für Temperaturfühler
1 Relaisausgang
Inkl. 2 Temperaturfühler
Solar controller
3 inputs for temperature sensors
1 semiconductor relays
incl. 2 temperature sensors Pt1000
Art.-Nr.
977.15.04.00.01
677.25.77.00.01
977.15.23.00.01
SolarIso
larthermal
63
Typ / type
G1⁄2 AG x 35 mm x 6,1
G1⁄4 AG x 28 mm x 5,7
Wilo St 15/6 Eco 130 9H
Wilo St 15/7 Eco 130 6H
Wilo St 15/8 Eco 130 9H
Wilo Stratos Para 15/1-11,5
130 PWM2 6H
Wilo Yonos Para 15/7.0
PWM2 130 9H
Wilo Yonos Para 15/7.5
PWM2 130 9H
Wilo Yonos Para 25/7.0
PWM2 130 6H
Grundfos Solar PM2
15-65 130 9H
Art.-Nr.
977.15.13.00.01
700.23.75.00
611.25.40.00
611.25.55.00
677.01.80.00
130.15.48.00.01
180.20.89.00.01
180.25.29.00.01
180.15.37.00.01
130.15.78.00.01
130.25.07.00.01
130.16.68.00.01
Regler
Steca TR A0502 TT
Solar- und Systemregler
4 Eingänge für Temperaturfühler
1 Eingang für Temperaturfühler oder
Impuls
2 Ausgänge Triac
2 Ausgänge PWM
Inkl. 3 Temperaturfühler
Solar & system controller
4 inputs for temperature sensors
1 input for temperature or pulse
1 input for VFD Grundfos Direct Sensor™
2 semiconductor relays
2 PWM outputs
incl. 3 temperature sensors Pt1000
Temperatursensor Pt1000
Kabellänge 3 m
Max. 180 °C
Ø 6 x 32 mm
Temperature sensor Pt1000
Length of cable: 3 m
Tauchhülse
Fühlertauchhülse zum Einschrauben.
passend für Temperaturfühler
Ø 5,5 bzw. 6 mm
Immersion sleeve to screw, apt
for temperature sensors Ø 5,5 or 6 mm
Ersatzteile Pumpen Solar
Solar Pumpen als Ersatzteile für die
Pumpengruppen der Marke tubra®
Spare pumps for tubra®
solar thermal pump stations