Post on 03-Apr-2018
G) Recycling and waste treatment
No. G-1 Act Co., Ltd. CEO Akihisa OKUDA
Category Recycling and waste treatment Keyword Sludge treatment, dehydration
Product/ser
vice name
Applicable
field
Address 2-3 Nishiyashiki, Miyaushiro-cho, Konan City, Aichi 483-8044, Japan
CEO Akihisa OKUDA okuda@act2002.co.jp
http://www.act2002.co.jp Tel: +81-587-51-2655 Fax:+81-587-51-2656
No. G-2 AKECHI CERAMICS Co., Ltd. President Nobutaka USHIGOME
Category Keyword
Product/ser
vice name
Applicable
field
Address 1614 Akechi-cho, Ena City, Gifu 509-7795, Japan
General Manager Toshiyuki MUROI t.muroi@tyk.jp
Tel: +81-573-54-2105 Fax: +81-573-54-2126
Ash melting furnace, heat resistance material
Description
of business
Producing of heat resistance materials mainly made of graphite for continuous casting at ironworks, graphite bricks,
graphite crucibles for melting nonferrous metals, and antibacterial agents
Dehydration Plant Process Flowchart
Contact
Appeal
point
Since the system is not based on thermal dehydration, it is not necessary
to burn a fossil fuel to produce a massive amount of heat energy.
Therefore, the system reduces fuel expense and cuts down the cost of
dehydration itself. Dehydration without dissipating heat reduces the
occurrence of unpleasant odors and eliminates the emission of
greenhouse effect gasses. Low-cost dehydration is realized.
Recycling and waste treatment
Fuel conversion dehydration plant for high-water content sludge organic residue
Organic material dehydration plant Product picture, flow diagram, etc.
Description
of business
Our dehydration technology reduces moisture content from 70% to 20%
in a short time with the effect of a dehydration accelerant and function of
an air blowing system with little use of heat energy.
The organic materials dehydrated to 20% can be used as solid fuel
generating a caloric value of approximately 4,500 kcal/kg.
Product
features/
character
istics
Designing ash melting furnace bodies and supplying heat
resistance materialsProduct picture, flow diagram, etc.
Product
features/
character
istics
Focusing on the superior characteristics such as metal slag resistance of
graphite bricks, which make use of the technology developed for furnace
bottom and basin heat-resistant bricks of a blast furnaces at ironworks,
we design the bodies of melting furnaces that are used to reduce the
volume of garbage incineration ash, fly ash, and industrial wastes in the
field of environmental conservation, and supply heat resistance materials
for these applications.
(1) Materials superior in slag resistance and wear resistance
(2) Materials stable against thermal load and thermal history
(3) High-precision bricks adherence to the body design of a blast furnace,
reducing furnace construction period
Temporary Laying of Graphite Bricks
Contacthttp://www.tyk.co.jp/01CompanyInfo/cont05.html
Electric resistance type plasma ash melting furnaces (capacity: 12 to 72 tons/day): 19 units
Appeal
point
- Large graphite bricks (max. size: 2,500 mm) can be manufactured.
- High-precision and superior cooling capacity realize long-life durable
products.
★ Detailed Information Available 32
G) Recycling and waste treatment
No. G-3 ★ President
Category Keyword
Product/ser
vice name
Applicable
field
Address 14-24 Showa-cho, Minato-ku, Nagoya City, Aichi 455-0026, Japan
Managing Director Minoru KANETA m-kaneta@arbiz.co.jp
http://www.arbiz.co.jp/ Tel:+81-52-619-6600
No. G-4 ARMEC CO., LTD. CEO Hideki HOSHIKAWA
Category Keyword
Product/ser
vice name
Applicable
field
Address 143 Toyama, Kitasaki-cho, Obu City, Aichi 474-0001, Japan
Obu Plant Plant Manager
http://armec.jp/ Tel: +81-562-44-1159 Fax: +81-562-44-3789
Contact
Appeal
point
Based on Aichi Prefecture, we have been mainly working on recycling
resources including metals and treating industrial wastes for more than
50 years. Under a motto of "Revitalization Factory," we contribute to
environmental preservation through resource recycling.
Recycling and waste treatment
Description
of business
Recycling and reusing iron, nonferrous metals, and resin, collecting, transporting, disposing, and recycling industrial
wastes. Contractor of ordinary license
Product
features/
character
istics
Description
of business
Target of processing and recycling: Discarded automobiles, industrial wastes, discarded electric appliances for business uses,
metal scraps (steel-making materials, forging materials, special steel scraps, non-ferrous metals), OA and office appliances, circuit
boards, demolishing of plants, used papers, waste plastics, sales of used cars (in Japan and overseas), recycling of small home
appliances
Resource recycling Product picture, flow diagram, etc.
Industrial waste processing Product picture, flow diagram, etc.
Products sold to: Steel manufacturers (steel-making materials), paper manufacturers (RPF), non-ferrous metal
manufacturers, export, etc.
Crushing, processing, and recycling
Product
features/
character
istics
Compressing, press-packing, crush-and-press-molding, crushing and
sorting.
In compliance with the excellent standard as an industrial waste
collection and transport business and disposal business.
Certified with ISO14001 and ISO27001
• Automobile: Reuse at overseas, resource recycling, reuse in Japan,
sales of parts
• Metal: Scrap recycling, non-ferrous metal + rare metal recycling
• Plastic: Material, RPF (solid fuel), thermal recycling
• Production of steel-making byproduct by effectively using automobile
shredder dust (ASR)
All-weather recycling plant in a large site
We recycle metal and resin scrap generating during demolition and
disposal of buildings and plants, and during manufacturing, discarded
from hardware stores, supermarkets, and retail stores. The scrap is
sorted, decomposed, cut, crushed, and processed into forms that can be
delivered to steel mills and smelting and refinig mills.
We have established a mechanism and system for adjusting components
and quality of materials according to the requirements by each customer,
and prevent drain of collected materials.
The entire company is working hard to enhance the convenience of the
customers.
Appeal
point
Crushing using large shredders. We are good at recycling difficult-to-process
composite materials by repeating sorting after crushing (magnetic sorting, wind-
power sorting, non-ferrous sorting, heavy liquid sorting, and sorting by specific
weight). We obtained patent for the production of iron and steel byproducts using
shredder dusts. Our Production Technology Department is in charge of the
process from plant design to the production.
Production of iron and steel auxiliary
materials, using shredder dusts
Contact
ARBIZ Corporation Dai SETA
Recycling and waste treatment
Fax:+81-52-619-6601
Management Department
Automobile, metal, plastic, waste paper
sh-hoshikawa@armec.jp, info@armec.jpShigehito HOSHIKAWA
High-Performance Nugget Machine
(Breaker/Crusher)
Retailers, construction companies, and automobile component manufacturers
33 ★ Detailed Information Available
G) Recycling and waste treatment
No. G-5 BENIKYU Co., Ltd. CEO Keigo MIURA
Category Keyword
Product/ser
vice name
Applicable
field
Address 18 Hananaka-cho, Toyohashi City, Aichi 441-8032, Japan
CEO Keigo MIURA hana@benikyu.com
http://www.benikyu.com Tel: +81-532-31-1304 Fax: +81-532-31-7284
No. G-6 ★ President
Category Keyword
Product/ser
vice name
Applicable
field
Address 3-37-3 Suyamacho, Mizuho-ku, Nagoya City, Aichi 467-0066, Japan
President Koji KINUGUSA
http://chubueen.com/ Tel:+81-52-848-9371
Contact
Recycling and waste treatment Metal scraps, recycling
Description
of business
Collection and purchase of metal scraps including iron scraps/non-ferrous metal scraps (copper/aluminum/stainless
scraps), building demolition, facilities removal, other materials recycling
Product
features/
character
istics
BENIKYU is a total recycling company, providing the following services.
- Collection of metal scraps
- Processing including sorting, compression and cutting
- Purchase/ sale of iron scraps
- Purchase/ sale of non-ferrous scraps
- Transport/ removal of machinery equipment
- Building demolition
- Automobile dismantlement
- Rare metal collection from small-size electrical appliances and
electronic devices
Cutting process
Appeal
point
- Collection of metal scraps
- Processing including sorting, compression and cutting
- Purchase/ sale of metal materials including iron, non-ferrous metals
Steel manufacturers, non-ferrous metal manufacturers
Recycling system EE21 Product picture, flow diagram, etc.
Product
features/
character
istics
This system performs pyrolysis of organic wastes in an anoxic condition
and turns them into ultra-fine new carbon.
• Small to large systems can be freely combined, but the operation of
multiple units is required.
• Use of nitrogen in the air: The pyrolysis method in the atmosphere
reduces costs including the cost of materials and emits smaller amount of
CO2 due to the use of electric furnace.
• Operators need less special knowledge compared to general
incinerators. The facility size is small and requires small spaces for
installation.
• Radioactive materials can be flocculated into carbon.
Description
of business
Digital image processing and analysis, infrared measurement, planning, design, sales, and management of
biomass plant system, sales of environmental instrument systems, comparison and facility planning of tunnel
construction methods and soil improvement methods, and other operations (omitted)
Contactceen.shindan@swan.ocn.ne.jp
Central Earth Environmetal Network Co., Ltd. Koji KINUGUSA
Appeal
point
The new carbon produced by EE21 has the following characteristics: [1] ultra-fine particles: 34 million
particle/cc; [2] nonconductive; [3] heat conductive (4.7 K or more); [4] close to the black body in endothermic
(heat radiation) measurement, and [5] can be molded into ultra-fine graphite (2 to 100 nanometers) through
special processing. The Australian government granted a substance patent to this material (atomic carbon) in
August 2011.
*Ministry of the Environment assessed this material in the 2014 Decontamination Technology Demonstration
Experiment. (implemented by Nihon Plant Kensetsu Corporation)
For detail: https://www.nustec.or.jp/etc/josen.html
Metal recycling company in Okinawa RPF Carbonization facility 50 to 100 t to be processed per day
Fax:+81-52-848-9391
Processing and recycling of metal scraps Product picture, flow diagram, etc.
Recycling and waste treatment Pyrolysis, material recycling
★ Detailed Information Available 34
G) Recycling and waste treatment
No. G-7 CHUKOH SEIKI CO., LTD. President Yoshikatsu KUDO
Category Keyword
Product/ser
vice name
Applicable
field
Address 5177-7 Sotoda, Hiyoshi-cho, Mizunami-city, Gifu 509-6251, Japan
General Affairs Department Directer Yuu MIURA ballmill@chukoh-seiki.com
http://www.chukoh-seiki.com/ Tel: +81-572-69-1025 Fax: +81-572-69-1027
No. G-8 ★ Daiseki Co., Ltd. President Hideki HASHIRA
Category Keyword
Product/ser
vice name
Applicable
field
Address 1-86 Funami-cho, Minato-ku, Nagoya City, Aichi 455-8505, Japan
recycle@daiseki.co.jp
http://www.daiseki.co.jp/ Tel: +81-52-611-6322 Fax: +81-52-611-0161
Recycling and waste treatment Grinder, recycling, garbage combustion, waste glass
Roller mill (Wet Pan) Product picture, flow diagram, etc.
Description
of business
Crushing machines manufacturing (coarse, fine, ceramic materials refining and recycling), filtering devices-
compressors, conveyors, deferrization equipment, ceramics material refining machines, waste water treatment
devices
Industrial waste recycling Product picture, flow diagram, etc.
Product
features/
character
istics
Waste oil (mineral oil, animal & plant fats, etc.) into recycled fuel
Waste liquid containing metal for metal material recovery
Sludge from plants and construction sites into cement material
Designated controlled industrial wastes (waste acid, alkalines, oils, etc.)
Others (various waste plastics, soot, slag, incinerated ash, etc.)
Various types of industrial waste is recycled and supplied to the
industrial sector as products.
Contribution in 70,000 cases nationwide (industrial waste treatment service contracts)
Contact
Contact
Recycling and waste treatment Industrial waste treatment, material recycling
Description
of business
Industrial waste processing, material recycling, environmental analysis & maintenance, construction business &
remediation of contaminated soil
Vice President Tetsuya YAMAMOTO
Waste oil processing & recycling flow
Product
features/
character
istics
The product grinds the materials with an action of compressive force by
roller weight, shearing force, friction force caused between ground
materials, and twisting force.
Appeal
pointApplicable to various range of input materials due to simple structure.
Roller Mill (Wet Pan)
This product recycles cake of ash generated in incinerator by grinding to make bricks, blocks, aggregate etc.
Appeal
point
(1) Broad range of coverage extending to all manufacturing industries
(2) Promotion of effective material use, recognizing industrial waste as
domestic materials resource
(3) Contribution to carbon dioxide reduction through recycling into fuels
analysis &separation
recycle to lubricant recycle to heavy oil reuse as auxiliary
refining blending &
adjustmentabsorption of
impurities by clay treatment
filtration centrifugal separation
product test
dewartering and
sludge
product shipmentproduct delivery product shipment
35 ★ Detailed Information Available
G) Recycling and waste treatment
No. G-9 President
Category Keyword
Product/ser
vice name
Applicable
field
Address Nagoya Fushimi Square Building, 1-13-26 Nishiki, Nakaku, Nagoya City, Aichi 460-0003, Japan
Geotech Department, Nagoya Office Director KOIZUMI
http://www.dowa-eco.co.jp/ Tel:+81-52-232-4137
No. G-10 ★ President
Category Keyword
Product/ser
vice name
Applicable
field
Address 2-2 Kuratsuki, Kanazawa City, Ishikawa 920-8203, Japan
Sales Engineering Group Susumu TANAKA
http://www.earth-eec.co.jp Tel:+81-76-268-6424
Description
of business
Environmental and recycling business: Resource recycling, waste disposal, soil purification, environmental
consultation service, etc.
Recycling and waste treatment Metal resource recovery, precious metals
DOWA ECO-SYSTEM Co., Ltd. Nagoya Office
Description
of business
Design, manufacturing, sales, and maintenance work in general of small RPF solid fuel production system using non-industrial and
industrial wastes
Production and sales of biomass (wooden) pellet production systems, water purification system, and ceramic foam.
Disposal of small amount of PCB, purification of
contaminated soil, and metal recyclingProduct picture, flow diagram, etc.
Product
features/
character
istics
• The advanced technology to recycle as many as 17 types of metals
including gold and silver based on the ore dressing and smelting
technologies accumulated as a metallurgy business. We can currently
recycle as many as 22 types of elements based on this technology.
• In compliance with the Law Concerning Recycling Measures of End-of-
life Vehicles: We collect valuable metals and steam.
Recycling furnace
Appeal
point
The collected metal resources are turned into products including
accessories, electronic substrates, films, and electric wires and returned
to the society.
Contact
Recycling and waste treatment Wooden, biomass, waste, fuel, solid, compact, device
RPF production system and pellet production system Product picture, flow diagram, etc.
Product
features/
character
istics
We form combustible materials and wastes into valuable solid fuels and
pellets.
We also form agricultural materials such as compost into easy-to-handle
pellets or other shapes.
We can produce pellets from various materials using flat-dice method.
• For the case of RPF production system
Example 1: Waste plastic + Used papers → RPF
• For the case of biomass pellet production system
Example 2: Wood scraps → Wooden pellet
Example 3: Compost → Compost pellet
Appeal
point
In addition to wood scraps, we can produce pellets from various materials such as
compost and rice husks. We can produce pellets in special shapes to respond to
requests of standard customers. Options: material feeders, water feeders, heater,
and sieving machines.
Safety systems and automatic continuous control are also standard functions for
the safe and easy operation of the system.
About 160 units
Contact
Earth Engineering Corporation Kazuya ONISHI
kanri@earth-eec.co.jp
Fax:+81-76-266-8255
Kenichi SASAKI
koizumin@dowa.co.jp
Fax:+81-52-205-5037
★ Detailed Information Available 36
G) Recycling and waste treatment
No. G-11 ECOTEC Inc. President Yoshitaka UCHIDA
Category Keyword
Product/ser
vice name
Applicable
field
Address 141-69 Hikitsukuri, Mihama-cho, Minamimuro-gun, Mie 519-5205, Japan
Administrative Dept. Assistant Manager Yoshitaka MINAMI y.minami@ecotec-jp.com
http://www.ecotec-jp.com/ Tel: +81-5979-2-0121 Fax: +81-5979-2-0199
No. G-12 Fujii Kakou Co., Ltd. President Tatsuo FUJII
Category Keyword
Product/ser
vice name
Applicable
field
Address 15-1 Minamiyochi, Higashibata-cho, Anjo City, Aichi 444-1213, Japan
Executive Director Kiyomitsu FUJII fujii-kk831@katch.ne.jp
http://fujii-kakou.co.jp/ Tel: +81-566-92-4100 Fax: +81-566-92-4594
Description
of businessTreatment, collection, conveyance, thermal recycling of waste tatami
Plastic recycling & coloring Product picture, flow diagram, etc.
Description
of businessPlastic recycling and coloring, recycled raw material sales, recycled material development & analysis
Treatment of waste tatami Product picture, flow diagram, etc.
Product
features/
character
istics
We break rice straws, the material of waste tatami, into pieces to make
solid fuel.
Treatment capacity: approx. 400t (approx. 40,000 tatami) / month
Sales routes of fertilizer: Paper manufacturers, iron industry, gardening
material distributors, seedling manufacturers, gardening shops,
landscape gardening/construction engineering business, agriculture
Appeal
point
- Top-class company specified in waste tatami treatment.
- This is the first project authorized as "Renewable resource composting
facility promotion project" from Ministry of Economy, Trade and Industry,
Ministry of Agriculture, Forestry and Fisheries, and Ministry of Health,
Labor and Welfare.
Public works, paper manufacturers, stock farms
Contact
Recycling and waste treatment Plastics, recycling & processing
Product
features/
character
istics
Recycled resin processing & sales: Damaged molded plastic goods are
collected and ground at the plant, sorted into designated colors for
pelletization, inspection, packaging, sales and shipment.
Also, the company owns physical property test equipment for
compounding to meet customer needs in physical property.
Appeal
point
We are cooperating in the reduction of cost and waste output through
palletizing and purchase of resin from customers.
Automobile parts industry, construction parts industry, sundry goods industry
Contact
Recycling and waste treatment Recycling, composting, solid fuel production
Before compounding After
in customer's plant in Fujii Kakou
37 ★ Detailed Information Available
G) Recycling and waste treatment
No. G-13 ★ Goh Iron Works Co., Ltd. President Shizuka KANO
Category Keyword
Product/ser
vice name
Applicable
field
Address 58-2 Osa, Tarui-cho, Fuwa-gun, Gifu 503-2122, Japan
Section chief Yuji TSUBO tsubo@gohiron.co.jp
http://www.gohiron.co.jp/ Tel: +81-584-22-1120 Fax: +81-584-22-2038
No. G-14 Green Arrows Central Co., Ltd. President Hiroya YAMAMOTO
Category Keyword
Product/ser
vice name
Applicable
field
Address 213-7 Honowari, Minami Shibata-machi, Tokai City, Aichi 476-0001, Japan
Kikuo TOMITA k_tomita@daiseki-eco.co.jp
http://www.daiseki-eco.co.jp/gac/ Tel: +81-52-689-3501 Fax: +81-52-604-1558
Delivery of Soil Improvement Material: Construction of commercial facilities (private) and land reallocation (public),
etc.
Lining Tank Department
Technology Development Section General ManagerContact
Manufacturing soil improvement materials using recycled resources
as principal raw materialsProduct picture, flow diagram, etc.
Product
features/
character
istics
- Process: Collecting/receiving waste plaster boards, hand screening
(removing metal and wood pieces), crashing, magnetic screening, sifting
paper from plaster powder, and recycling both of them.
- We also sell soil improvement materials made from the recycled plaster
powder. We can produce custom-made products according to the needs
of customers. Since recycled resources such as recycled plaster powder
and slag are used as main raw materials, our products contribute to the
promotion of a recycle-oriented society.
Recycling (Waste Plaster Boards)Appeal
point
Description
of businessRecycling waste plaster boards every step from collecting, intermediate-processing, and delivering to clients
Recycling and waste treatment Crushing equipment, environmental plant manufacturing
Contact
Product
features/
character
istics
In-house production of fluororesin (PTFE、PFA) sheet lining for tanks.
Being possible to manufacture large-size tanks more than 60m3; having
experience up to 100m3
size tank.
The lining sheet can be manufactured in the thickness 4mm; effective for
higher chemical resistance and corrosion resistance. It is one of our
product features to improve the ordinary PTFE into PLP sheet, in
enhancing chemical resistance, non-viscous and purity.
Appeal
point
For liquid storage tanks of waste liquids and the like, conventional steel
tanks can not store unspecified waste liquid because of their insufficient
corrosion resistance. However, lining with fluororesin sheet will make
such storage possible. The fluororesin lining tanks are also used for
removing emission gas. Being widely adopted by waste liquid collection/
recycling industry and chemical industry.
Description
of business
Industrial machinery, plant equipment, infrastructure equipment, lining application with fluororesin, R&D, industrial
waste treatment, golf course management, and metal processing and assembly
Fluororesin lining tank Product picture, flow diagram, etc.
More than 1,000 delivery records to mainly chemical industry; and medical, food, power and recycling industry.
Uses of Soil Improvement Material: Construction sites (soil solidification)
and Waste intermediate-treatment plants (sludge modifying)
One of the largest treatment plant in Japan dedicated for waste plaster
boards
Recycling and waste treatment Waste plaster board
★ Detailed Information Available 38
G) Recycling and waste treatment
No. G-15 Hakusekikan Co., Ltd. President Tetsuomi IWAMOTO
Category Keyword
Product/ser
vice name
Applicable
field
Address 5263-9 Hirukawa, Nakatsugawa City, Gifu 509-8301, Japan
President honsha@hakusekikan.co.jp
http://iwamoto-stone.com/ Tel: +81-573-45-3003 Fax: +81-573-45-2027
No. G-16 ★ President
Category Keyword
Product/ser
vice name
Applicable
field
Address 3-2-26 Shirakane, Showa-ku, Nagoya, Aichi 466-0058, Japan
President Toshihiro IHARA
http://ihara.co.jp/index.html Tel: +81-52-882-1838 Fax:+81-52-883-3461
info@ihara.co.jp
Recycling and waste treatment Carbonization, waste disposal, soil amendment, absorbent, exhaust heat usage
Mineral charcoal producing equipment "Super Stone Clean 530" and
"Super Stone Clean Z"Product picture, flow diagram, etc.
Description
of business
Environment-related devices (mineral charcoal producing equipment, research on raising animals and plants with
minerals, and charcoal absorbing chemical substances, and final waste disposal)
Description
of businessMaterial recycling of plastics with advanced functions
Product
features/
character
istics
Super Stone Clean 530 carbonizes plant residue such as rice hulls and
thinned wood to produce animal and plant raising materials, soil
amendments, and chemical substance absorbents.
The equipment can create hot water with its exhaust heat, which reduces
the consumption of fossil fuel.
One ton of charcoal fixes 3.7 tons of CO2.
Super Stone Clean Z turns organic substances into ash reducing the
volume to 1/100 to 1/3,000 with little use of fossil fuel.
Super Stone Clean 530:
Converting organic
substances into
charcoal, which
can be used for raising
fish and reviving plants,
absorbing cesium, and
exhaust heat generating hot water
Super Stone Clean Z:
Reducing the volume of
organic substances to
1/100 to 1/3,000
without using fossil fuelAppeal
point
Super Stone Clean 530 turns disposed organic substances into valuables. The created
charcoal can be processed into products for plant cultivation and chemical absorption. Its
exhaust heat generates hot water. Installing a heat pump provides air conditioning.
This equipment enables a recycling society with "local production for local consumption."
Aichi Pref., Gifu Pref., Tenryu-mura (Nagano Pref.), Kesennuma-shi (Miyagi Pref.), and Shizuoka Pref.
Contact
Recycling and waste treatment Resin recycling, material recycling
Tetsuomi IWAMOTO
Ihara Synthesis, Inc. Toshihiro IHARA
Plastic recycling Product picture, flow diagram, etc.
Product
features/
character
istics
We have been working on material recycling multi-purpose resin and
resins with advanced functions for 40 years since the establishment of
this company. Compared to multi-purpose resins, resins with advanced
functions often contain fillers and metals. These materials often caused
wearing in machines and required manual works. Cost reduction was
therefore difficult. We tried to solve this problem and successfully
reduced the cost by reevaluating materials of mechanical equipment and
automating them. We are causing innovation to recycling technologies by
cooperating with research facilities to improve the quality of recycled
materials at the same time.
Appeal
point
We improved the physical property and fire-resistance of recycled
materials. We are also researching on technologies to recycle hardening
resins.
Innovation to recycling technology.
Automobile component manufacturer, household appliance manufacturer, office equipment manufacturer
Contact
Virgin pellet
Storage and management
Powder Recycled pellet
39 ★ Detailed Information Available
G) Recycling and waste treatment
No. G-17 ITOJU Co., Ltd. President Yasunori ITO
Category Keyword
Product/ser
vice name
Applicable
field
Address 1-3 Kawaramachi, Yokkaichi City, Mie 510-0033, Japan
President Yasunori ITO
http://www.ito-jyu.co.jp/ Tel: +81-59-331-3252 Fax: +81-59-333-3013
No. G-18 JFE Material Co., Ltd. President Masaru WASHIO
Category Keyword
Product/ser
vice name
Applicable
field
Address 2-9-38 Shosei-machi, Imizu City, Toyama 934-8550, Japan
Syuichi UESAKA uesaka@jfe-material.jp
http://jfe-material.jp/ Tel: +81-766-84-4494 Fax: +81-766-84-4037
General Administration Dept. Deputy section chief
Description
of businessSteelmaking/foundry/plastic materials processing and sales, total waste management
Recycling and waste treatment Industrial waste, all items, uniform management
Description
of businessMetal refining and industrial waste recycling with electrical furnace
Offering one-stop services to emission traders Product picture, flow diagram, etc.
Product
features/
character
istics
- We handle metal, plastic, electronic substrate, valuables and industrial
waste (including specially-controlled waste).
- We have collection/transport permit in the Chubu area and a wide-area
transport network.
- We offer comprehensive recyclable logistics using various recycling
facilities and treatment plants.
Appeal
point
Offering uniform management to support our customers' waste control
(matching services for waste treatment and recycling, preparation of a
recycling report, development of management manual, etc.).
Major electronics business, leading image & solution industry, major ICT industry
Contacti-yasunori@ito-jyu.co.jp, itoju@ito-jyu.co.jp
Recycling and waste treatment Super-high temperature, electrical furnace, rare metal recovery
REM business: Recycling rare metals found in industrial
wasteProduct picture, flow diagram, etc.
Product
features/
character
istics
Disposable catalysts from refineries and ash, etc., from thermal power
stations are burned with heavy oil to manufacture incinerated metal ore
containing rare metals (molybdenum, nickel and vanadium).
Incinerated ore is melted and refined to manufacture ferrovanadium (FV)
and ferromolybdenum nickel (FMoNi) alloy.
Rare metal separation and recovery from
slag containing ferromolybdenum and
vanadium
Appeal
point
Slug produced as byproduct is reprocessed for sale as desulfurized
material used in steel refinery, etc.
Introduced in 2005. FV & FMoNi output: 3920 tons (FY 2011)
Contact
Use of goods
Obtained
Customers'
Treatment & recovery
Scrapping, collection,
transportation
Dissolution &
disposal
return valuables
reuserecycling
industrial
★ Detailed Information Available 40
G) Recycling and waste treatment
No. G-19 KAMEI SEITO Co., Ltd. President Hiroaki KAMEI
Category Keyword
Product/ser
vice name
Applicable
field
Address 1258 Kasahara-cho, Tajimi City, Aichi 507-0901, Japan
President Hiroaki KAMEI h-kamei@eco-angels.com
http://www.eco-angels.com Tel: +81-572-43-3511 Fax: +81-572-43-6815
No. G-20 President
Category Keyword
Product/ser
vice name
Applicable
field
Address 2-4-8 Nagata, Kanazawa City, Ishikawa 920-0043, Japan
General Affairs Department Yukihito YAMAMOTO
http://www.tk-g.co.jp/ Tel:+81-76-223-4858
Kanazawa Hodo Co., Ltd. Takeo MUKAI
yyamamoto@tk-g.co.jp
Public roads, theme parks, parking spaces, etc.
Description
of business
Manufacturing and wholesaling "Erthan Bricks" Earth-made bricks, collecting, transporting, and intermediate-
processing industrial wastes, importing and wholesaling stone, porcelain plates, gardening products, and
conducting global business on non-firing solidification technology
Recycling and waste treatment Recycled resource materials, non-firing solidification, brick
Fax:+81-76-263-6318
Description
of businessPavement construction; production and sales of asphalt mixtures and RC-40; industrial waste disposal work
"Erthan Bricks" Earth-Made Bricks Product picture, flow diagram, etc.
Product
features/
character
istics
Erthan Bricks are laying materials for pavements and gardens. The
antique brick-like material is produced from various unused resources
such as sewage sludge incinerated ash, water granulated slag (urban
garbage melted slag), mine spoil, ceramic spoil, china and porcelain
pieces, resin slime, waste plastic, foundry sand, and plastering waste,
using traditional pottery technique and newly developed special
solidification technology (patented process).
- Although non-fired, the bricks have pottery-like texture and a wide range
of colors with superior workability at low prices.
- They meet severe safety standards including physical properties such
as strength, skid resistance, and elution of toxic components.
Appeal
point
Made of 80% or more recycled materials using no fossil fuel causing
global warming, "Erthan Bricks," Earth-friendly eco bricks correspond to
the needs of the time.
We have delivered our products to 47 prefectures nation wide.
Contact
Recycling and waste treatment Incinerated sludge ash, asphalt mixture
Sewage sludge incineration and recycling plant and asphalt mixture
Rebuild As-ConProduct picture, flow diagram, etc.
Product
features/
character
istics
The incinerated ash of sewage sludge generated at sewage treatment
plants is processed at a recycled plant and recycled into filler, one of
materials of asphalt mixture (name: Rebuild As-Con).
• The heavy metal insoluble treatment technology stabilizes the product.
• The filler complies with environmental safety and quality standards.
Appeal
point
Sewage system administrator (governments), asphalt mixture production
plants.
Rebuild As-Con is a certified recycled product at Ishikawa Prefecture at
2000. This product has been re-certified since then. This product has
received many other prizes and awards.
Contact
41 ★ Detailed Information Available
G) Recycling and waste treatment
No. G-21 President
Category Keyword
Product/ser
vice name
Applicable
field
Address 128 Hachikencho, Handa City, Aichi 475-0807, Japan
Environmental Business Department Ayako AOYAMA
http://www.kanemiy.co.jp/ Tel:+81-56-923-2871
No. G-22 President
Category Keyword
Product/ser
vice name
Applicable
field
Address 5-1 Momoyama Shiratoricho, Toyokawa City, Aichi 442-0847, Japan
President Kei TAKAHASHI
http://eco-techsys.com Tel:+81-53-387-5512
Kei TAKAHASHI
Fax:+81-53-395-5570
Sake manufacturer, soy sauce manufacturer, and other food production factories
On-site food waste disposal system Product picture, flow diagram, etc.
Description
of business
Development, design, production, and sales of waste plastic automatic washer, Bun-Sen®, wrapping material
automatic sorter, Bun-Bun®, and other environmental devices, and design and production of electronic components
and machine tool covers using CNC sheet metal (high-precision mechanical sheet metal)
KANEMIYA Co., LtdRecycling and waste treatment Waste plastic with residue, automatic washer, recycling, waste plastic recycling
Takao MASE
Description
of business
Food recycling: Production and sales of feed (eco-feed), production and sales organic fertilizers. Environmental
consulting. Environmental analysis, disposal of industrial and non-industrial wastes.
Waste plastic automatic washer Bun-Sen® Product picture, flow diagram, etc.
Product
features/
character
istics
This is a washer for waste plastics emitted from food processing factories
which used to be incinerated due to the adherence of food residue.
The removal of the adhered food residue enables material recycling.
• The washed waste plastic can be sold.
• A 45 liter bag is speed-washed and dehydrated in about 2 seconds.
• This is a water-saving model and only consumes 20 liter/hour of water.
• The installation space is small.
Waste plastic automatic washer Bun-Sen
Appeal
point
Food processing factories, industrial waste processing businesses, resin
recycling factories, etc.
Food manufacturers, beverage manufacturers, intermediate waste processing businesses, automobile
manufacturers, electric appliances manufacturers
Contact
Recycling and waste treatment Fertilizer production, on-site processing, composting
ayako@kanemiy.co.jp
FAX:+81-56-923-2872
Kankyo-TechSys corporation
Product
features/
character
istics
We enable the reuse of food wastes as feed by preserving and
processing them at food factories.
Different types of food wastes are processed appropriately.
This system not only reduces the disposal cost but also improves the
hygiene.
Recycling work: Pineapple skin, lees, potato skins, Shochu lees, flour,
etc.
On-site treatment at the site of waste
emission
Appeal
point
On-site processing: Food wastes which decay quickly and used to be
difficult to turn into feed can be effectively used as the raw material of
feed by drying them and adding organic acid to them to improve the
preservability.
Contacteigyo@eco-techsys.com
★ Detailed Information Available 42
G) Recycling and waste treatment
No. G-23 President
Category Keyword
Product/ser
vice name
Applicable
field
Address 2-1 Minamichigiri, Toyokawa City, Aichi 442-0008, Japan
Managing director Tsuguhisa KOUNO
http://www.kayama-k.co.jp/ Tel:+81-53-389-0375
No. G-24 President
Category Keyword
Product/ser
vice name
Applicable
field
Address 3374 Aza Taracho, Oaza Okusa, Komaki City, Aichi 485-0802, Japan
Project Planning Department Director Yohei KONDO
http://www.kondosetsubi.co.jp/ Tel:+81-56-879-3511
Kayama Kogyo Co., Ltd. Junichiro KAYAMA
info@kondosetsubi.co.jp
Recycling and waste treatment Waste treatment, solid fuel (RPF) production
This product is for companies with large boilers such as paper
manufacturing plants.
Fax:+81-53-384-3739
Hisataka KONDO
Extrusion (production of solid fuel) (RPF) Product picture, flow diagram, etc.
Description
of business
Collection, transportation, disposal, and dismantlement of industrial wastes, industrial wastes requiring special
management, and non-industrial wastes
Product
features/
character
istics
We handle used papers and waste plastics which are considered difficult
wastes to be used in material recycling. We use them as main materials
and produce molded solid fuels after properly sorting and crushing
wooden scraps, paper scraps, and used tatami mats.
Uses include fuel for boilers.
• The processing capacity of 3 t/h
Appeal
point
We offer an integrated service including the design, production, and
installation of boilers, pressure vessels, and industrial waste incinerators.
Specifically, we have started producing biomass boilers which would burn
on solid fuel made from wooden chips, paper scraps, and waste plastics
rather than conventional heavy oil before the name of biomass boiler
became known. We have also sold biomass power generators which
combined biomass boiler with power generator.
We accept orders for both design and production, or production only
upon request. This is a certified factory for producing boilers and
pressure vessels under the Electricity Business Act and the Industrial
Safety and Health Act.
Example of waste incinerators (in an
airport)Appeal
point
Our strengths are the attitude to respond to any questions of our
customers, the integrated system covering design, production,
installation, and follow-up maintenance, and the technologies we have
accumulated as a plant specialist since the foundation of the company.
We have especially many experiences in the design and production of
plants to match the needs of our customers.
Nine companies in the paper manufacturing industry, one cement company, two companies in the steel-making and
iron-steel industry, and one company in other field
Contactkohno@kayama-k.co.jp, info@kayama-k.co.jp
KONDO PLANT ENGINEERING CO., LTD.Recycling and waste treatment Boiler, incinerator
Description
of business
Boilers and pressure vessels, dust collectors, storage silos, transportation equipment, incinerators, exhaust gas
treatment systems, recycled power generators, engineering (industrial waste incinerators, dryers, industrial kilns,
etc.)
Biomass boiler power generator Product picture, flow diagram, etc.
Product
features/
character
istics
Industrial waste disposal companies, companies with chemical plants, paper production companies, gypsum board production companies
ContactFax:+81-56-879-6810
Screening
No
n-
ch
lori
ne
Crusher Material feeder Compacting and extruding machine
RPF
Shipment
Uses include fuel for boilers.
OX Paper
manufacturer
Production process
The accepted waste plastics and
used papers are roughly sorted and molded and then made into products as RPF.
Wa
ste
p
las
tic
Pap
er
scra
p
Wo
od
scra
p
43 ★ Detailed Information Available
G) Recycling and waste treatment
No. G-25 President
Category Keyword
Product/ser
vice name
Applicable
field
Address 37-10 Shiomi-cho, Minato-ku, Nagoya City, Aichi 445-0028, Japan
Bio Plaza Nagoya Michiyo MURAHIRA bpn@kumasei.com
http://www.kumasei.com/ Tel: +81-52-614-0539 Fax: +81-52-614-0515
No. G-26 Marc Corporation Co., Ltd. President Hiromitsu MUKAI
Category Keyword
Product/ser
vice name
Applicabl
e field
Address 531-1 Suzukida, Ifuna-cho, Suzuka City, Mie 519-0323, Japan
Administration Dept General Manager Kayo MATSUBARA m-kayo@mie-arc.or.jp
http://www.mie-arc.or.jp/ Tel: +81-59-371-6330 Fax: +81-59-371-6660
KUMASEI Co., Ltd. Mitsusiro MURAHIRA
Director and Office manager
Recycling and waste treatment Garbage, composting, fertilizer production
Product
features/
character
istics
We have overcome important problems of fertilizer production from
kitchen garbage including sorting, deodorizing, and securing sales
channels.
In regards to the deodorizing technology, we are using a closed system
which does not release odor or contaminated water to the outside of a
plant to stay environmentally friendly.
The recycled product, the organic fertilizer named Green Supple
contributes to the development of recycle-oriented society and promotes
recycling businesses with recycled products of food wastes which
connect production farmers and consumers.
Description
of businessFood recycling (production of fertilizer)
Automobile recycling Product picture, flow diagram, etc.
Product
features/
character
istics
Descriptio
n of
business
Automobile recycling
Bio-plaza type kitchen garbage recycling system Product picture, flow diagram, etc.
Appeal
point
Emphasis: Green Supple, the recycled fertilizer, is certified as an organic
JAS material and being sold in and outside of Japan.
Companies in Tokai region, fertilizer companies in and outside of Japan
Contact
Recycling and waste treatment Automobile, metal recycling, used parts recycling
Proactive collection, appropriate dismantlement and recycling of used
automobiles.
- Recycling of iron/non-ferrous materials and rare metals
- Production/sale of recycled automobile parts
Showroom
Appeal
point
Awarded "National top 20: excellent total recycling business" by the 2010
TH Team (ASR recycling organization consisting of 9 automobile
manufacturers)
Contact
Purchase from automobile dealers, sale to trading firms and other companies
Recycling loop
To build sustainable andrecycling-oriented society
Collection
Food residue
Ruptured bag
Fermentation
Use of solar heat
Deodorization
Product
Organic fertilizer produced from food
residue: Green Supple
Shipment
Eco-farmer
JASpecialized businessTrading company
Agricultural producer
★ Detailed Information Available 44
G) Recycling and waste treatment
No. G-27 MARUWA MACHINERY CO., LTD. President Toshinari HAYASHI
Category Keyword
Product/ser
vice name
Applicable
field
Address 592-16 Kainazaki, Mizuhashi, Toyama City, Toyama 939-3552, Japan
Machinery Department ASAKURA info@maruwa-mcn.co.jp
http://www.maruwa-mcn.co.jp Tel: +81-76-478-5800 Fax: +81-76-478-3908
No. G-28 Matsukawa Yosaku Shoten Co.,Ltd President Tsutomu MATSUKAWA
Category Keyword
Product/ser
vice name
Applicable
field
Address 3-23 Asahigaoka, Hakusan City, Ishikawa 924-0004, Japan
Director matsukawa@adagio.ocn.ne.jp
Tel: +81-76-275-7755 Fax: +81-76-275-7877
Yoshiki MATSUKAWA
Fuel supply system, industrial machinery, etc. Product picture, flow diagram, etc.
We supply Copper nugget materials to nonferrous metal manufacturers,
as well as FC/FCD steel materials for mold manufacturers.
Lumbering industry, industrial waste industry
Recycling and waste treatment Biomass, fuel supply equipment, saw mills
Product
features/
character
istics
Biomass fuel supply equipment, industrial waste plants
Appeal
pointWe provide comprehensive services from design to manufacturing.
Description
of business
Plant equipment (boiler fuel separator stock line, wooden waste crushing line), transport machines (feeders,
conveyors, etc.), dust collectors (bug filters), wood processing machines
Contact
Recycling and waste treatment Metals, sorting and processing, material supply
http://nttbj.itp.ne.jp/0762757755/index.html
Description
of businessSupply of casting, steel refining and nonferrous metal raw materials
Malleable steel scrap, cut steel scrap & copper nuggets Product picture, flow diagram, etc.
Product
features/
character
istics
Various types of metal waste are sorted and processed for their
respective markets.
- Recycled steel from casting raw materials
- Recycled steel from steelmaking raw materials
- Recycled materials from nonferrous raw materials
Principal facilities: Shredders for thin steel plates, hydraulic cutters, press
machines & overhead traveling cranes with lifting magnets
Appeal
point
Mold manufacturers in Hokuriku region
Contact
45 ★ Detailed Information Available
G) Recycling and waste treatment
No. G-29 ★ M-DIA &Co., Ltd. President Hiroyoshi MORI
Category Keyword
Product/ser
vice name
Applicable
field
Address 551-2 Nakamura, Namerikawa City, Toyama 936-0002, Japan
General Affairs Department Masae TANIGUCHI taniguchi@m-dia.com
http://www.m-dia.com Tel: +81-76-476-0062 Fax: +81-76-476-0063
No. G-30 ★ NEXTRY INC. CEO Yoshihiro FUJII
Category Recycling and waste treatment Keyword
Product/ser
vice name
Applicable
field
Address 345-1 Akada, Toyama City, Toyama 939-8064, Japan
CEO Yoshihiro FUJII info@nextry.jp
http://nextry.jp Tel: +81-76-464-5671 Fax: +81-76-464-5672
Description
of business
Designing, manufacturing, and selling environmental equipment mainly Eco-Separator separators/crushers,
manufacturing, repairing, and selling various machinery including hydraulic devices, and altering, repairing, and
selling used machinery
Crusher, separator, sorter, cutter, environment-related machine, machine, recycling
Solidification material, construction sludge treatment, dredge treatment, slime treatment
Description
of businessManufacturing and selling Earth Nature, a sludge volume reduction neutral solidification material
"Eco-Separator Series" separators/crushers Product picture, flow diagram, etc.
Product
features/
character
istics
Recycling and waste treatment
Eco-Separator" separator/crusher is our proprietary single-axis crusher.
It is a milestone product that performs crashing and separation
processes in a single unit for recycling mixtures of different types of
materials such as disposed electronic circuit boards, mobile phones,
small electrical appliances, and scrapped car components. The original
peeling technology significantly reduces work process. The separating
process with simple system configuration extensively saves the footprint
and total cost. The equipment has various functions such as chopping,
hammering, tearing, and shearing. It is designed to prevent entanglement
crushed objects, and accept various shapes and type of materials.
Appeal
point
- Individual blade can be replaced separately to reduce maintenance
cost. The blades have a long life and seldom break due to inclusion of
metal.
- The screen is replaceable so that product granularity is adjustable.
- The rotor is designed to bite deeply so that it can process without
applying pressure.
Auto manufacturers, metal refineries, electronics retail stores, and electric/optical cable manufacturers
Contact
"Earth Nature," a sludge volume reduction neutral
solidification materialProduct picture, flow diagram, etc.
Product
features/
character
istics
This product reduces the volume of mud piles by removing moisture from
high-water content sludge and dredge.
- After treatment, the soil remains neutral (pH 5.8 to 8.6), which can be
reused as vegetation soil.
- It can be applied not only to inorganic mud such as construction sludge
and bentonite sludge but also to organic mud such as dredge.
- Volume reduction cuts down on the cost for treating industrial wastes.
- The technology turns sludge into a form that can be transported on a
dump truck (with a cone index of 200 kN/m2 or higher), eliminating the
need for special vehicles (e.g. vacuum trucks).
Appeal
point
Using our sludge volume reduction neutral solidification material on site
for treating the sludge, which have been transported by vacuum trucks
and disposed of as industrial waste, greatly decreases the treatment
cost. The treated sludge can be recycled.
Pile driving in Shinagawa-ku (Tokyo) and Fukushima Prefecture
Contact
Dredge to be treated is piled in a pit, its specific gravity and watercontent are adjusted are kept constant.
Chemicals are charged and mixed using a portable soil amending machine.
★ Detailed Information Available 46
G) Recycling and waste treatment
No. G-31 President
Category Keyword
Product/ser
vice name
Applicable
field
Address 8-10 Matsuuracho, Toyama City, Toyama 931-8406, Japan
Planning Department Director Akiyo MIYAZAKI
http://www.prtec.co.jp/ Tel: +81-76-426-1088 Fax: +81-76-438-0602
No. G-32 Recycle Tech Japan Co., Ltd. President
Category Recycling and waste treatment Keyword
Product/ser
vice name
Applicable
field
Address 1-46-1 Saiwai-cho, Minato-ku, Nagoya City, Aichi 455-0041, Japan
President Miki TAKATORI takatori@r-t-j.co.jp
http://www.r-t-j.co.jp/ Tel: +81-52-355-9888 Fax: +81-52-355-9887
Plastic Recycling Technology Company Tatsushi FUJITA
miyazaki@prtec.co.jp, info@prtec.co.jp
Miki TAKATORI
Description
of business
Intermediate treatment and recycling of plastic containers and packaging, recycling of plastic industrial wastes, and
the sales of recycled plastic materials and products made with recycled plastic
Contact
Recycling and waste treatment Plastics, sorting, recycled products
Automatic sorting of plastics
Manual disassembly line
Appeal
point
2012 performance: Material recycling volume: 11,000 tons, material
recycling rate 100%
2012 IT Management Awards for Small and Medium Enterprises from
Ministry of Economy, Trade and Industry of Japan
Product picture, flow diagram, etc.
Product
features/
character
istics
The sorted plastics are turned into flakes and pellets based on types and
sold as products. Five automatic sorters with infrared rays automatically
sort plastics by material types.
The sorting precision is increased using gravity sorting and wind-power
sorting to produce recycled plastic flakes and pellets.
Appeal
point
The sorted plastics are turned into flakes and pellets based on types and
sold as products.
We accept PET bottle caps.
We accept worksite observation tours.
Amusement machines, parts reuse, material recycling
The sorted plastics are turned into flakes and pellets based on types and sold as products.
We accept PET bottle caps. We accept worksite observation tours.
Description
of business
Extraction & recycling of raw materials for recycling and reuse based on disassembly and sorting of plant waste
materials, as well as waste electronic devices, amusement machines, LCD panel glass and solar cell panel glass
Electronic devices, small household appliances, amusement arcades
Contact
Amusement machine disassembly and recycling with
IT-based management systemProduct picture, flow diagram, etc.
Product
features/
character
istics
- Goods are controlled by reading the QR code at acceptance and
disassembly.
- All materials recycled for LCD panels, not only glass but also polarized
film.
- Palletizing machine used for plastics to manufacture recycled pallets.
- Amusement machines and electronic devices are disassembled by
hand, to extract useful parts that manufacturers require, for cleaning
inspection and packaging before shipment as parts.
sieving and screening
Optical screening
Manual screening
Crushing and washing
Weight-based sorting
Wind-power screening
Granulation
Large bags, strings, and aluminum evaporation bags are removed in
advance to make it easier for the machines to sort materials.
Shining a light on individual plastic pieces to sort them into types based
on the optical absorption and reflection.
The crusher crushes the materials into 15 mm-square
pieces by types, which are then washed and dried.
The materials are separated into ones which float on water and ones
which do not. Only the materials which float on water are gathered and then washed and dried.
Thick materials (flakes) are directly made into products. Light materials
(fluffs) are put into a dryer.
The dried fluffs are heated at 200°C to melt and knead and turned into
pellets.
Small foreign objects and materials are removed in a large
rotary sieve (a drum with holes).
Process flow
Recycled plastic and products to use
sieving and screening
Optical screening
Manual screening
Crushing and washing
Weight-based sorting
Wind-power screening
Granulation
Large bags, strings, and aluminum evaporation bags are removed in
advance to make it easier for the machines to sort materials.
Shining a light on individual plastic pieces to sort them into types based
on the optical absorption and reflection.
The crusher crushes the materials into 15 mm-square
pieces by types, which are then washed and dried.
The materials are separated into ones which float on water and ones
which do not. Only the materials which float on water are gathered and then washed and dried.
Thick materials (flakes) are directly made into products. Light materials
(fluffs) are put into a dryer.
The dried fluffs are heated at 200°C to melt and knead and turned into
pellets.
Small foreign objects and materials are removed in a large
rotary sieve (a drum with holes).
Process flow
Recycled plastic and products to use
47 ★ Detailed Information Available
G) Recycling and waste treatment
No. G-33 President
Category Keyword
Product/ser
vice name
Applicable
field
Address 1088-3 Senbiki, Seki City, Gifu 501-3954, Japan
Mitsuyoshi HIROTA info@remic08.com
http://www.remic08.com Tel: +81-575-28-4008 Fax: +81-575-28-3114
No. G-34 SAIGAWAGUMI Co., Ltd. President Hiroaki SUEDA
Category Keyword
Product/ser
vice name
Applicable
field
Address 2-13-4 Jounan, Kanazawa City, Ishikawa 920-0966, Japan
Director Haruo TOMOYASU
http://www.saigawagumi.com/ Tel: +81-76-221-8223 Fax: +81-76-223-5450
REMICMARUHACHI Co.,Ltd. Yaoki YAMASHITA
Recycling and waste treatment Concrete recycling
Description
of business
General civil engineering work, water facilities work, water retention/penetration paving work, sewer culvert
maintenance/repair, industrial waste transportation
Description
of business
Production and sales of raw concrete, concrete recycling, sales of raw concrete treatment agents, sales of mobile
mixer trucks, mobile concrete, etc.
Concrete recycling facility Product picture, flow diagram, etc.
Product
features/
character
istics
• Recycled concrete (RC): Concrete rubble is crushed and recycled as
recycled macadam and roadbed material.
• The WA series: Roadbed improvement material, WA is injected into
excess raw concrete, which is then stirred at high-speed and discharged
and made into aggregates, which are reused as roadbed material.
Appeal
point
Construction company, raw concrete production company
Concrete rubble treated with WA does not solidify and instead forms
aggregates, which do not have to be crushed in a crusher, and loading
work is also easy.
ContactGeneral Affairs Department
Recycling and waste treatment Water retention/penetration paving using waste tiles
Product
features/
character
istics
Features
- Recycling waste tiles as aggregates
- Suitable for semi-flat pavement in compliance with the new barrier-free
law
- Contribution of construction to groundwater recharge
(Published in NETIS HR-100009-A,
Ministry of Land, Infrastructure, Transport
and Tourism)
Appeal
point
Pavement materials (Patent No: 4387995(JP))
Ministry of Land, Infrastructure, Transport and Tourism (NETIS
registration No: HR-100009-A)
"Kawara-maru" Water retention/penetration paving using
waste tilesProduct picture, flow diagram, etc.
Kanazawa City, Ishikawa Prefecture; Komono Town, Mie Prefecture; Nagoya City, Aichi Prefecture; Awara City,
Fukui Prefecture; electric power companies
Contacttomoyasu@saigawagumi.com, saigawa@saigawagumi.com
WA is injected.
Stirred at high speed for about three minutes and then discharged.Roughly stirred with a
Used as the roadbed material as recycled crusher.No large space is required. Can be used at a work site as well.Reduced noise, vibration, and dust.
Types of paved surface structurefor rainwater seepage
Drainage Permeable Water-retentive
Road
Base
Surface
Rain RainRain
Penetration
Evaporatio
Lacunal water
retentionDrain
★ Detailed Information Available 48
G) Recycling and waste treatment
No. G-35 ★ SANWAYUKA INDUSTRY CORPORATION Hitoshi YANAGI
Category Keyword
Product/ser
vice name
Applicable
field
Address 15 Fukada, Ichiriyama-cho, Kariya City, Aichi 448-0002, Japan
Akihito NAKAYAMA a_nakayama259@sanwayuka.co.jp
http://www.sanwayuka.co.jp Tel: +81-566-35-3000 Fax: +81-566-35-3023
No. G-36 ★ SHINKO TECNOS CO., LTD. President Mamoru KIMURA
Category Keyword
Product/ser
vice name
Applicable
field
Address 1-1-20 Masumida, Ichinomiya City, Aichi 491-0043, Japan
President Mamoru KIMURA info@shinko-mfg.co.jp
http://www.shinko-mfg.co.jp Tel: +81-586-28-9461 Fax: +81-586-24-4502
Recycling and waste treatment Waste treatment, recycling
Description
of business
Manufacturing of chemical products (function products with high purity), collection and recycling of solvents/
chemicals/ metals/ solids, manufacturing of oil products, casting, and waste treatment.
Industrial waste treatment and resource recycling Product picture, flow diagram, etc.
Representative Director
8 companies in Fukui, Yamagata, Shiga, etc., as well as 2 overseas in China and Indonesia
Contact
Product
features/
character
istics
We have been expanding its business on the theme of "creating
environmental needs".
Our core technologies are separation and high purity. With them, we do
wide range of business from collection and transportation of industrial
waste to manufacturing of reused/ recycled products for the sake of
effective use of the earth's resources.
Having various permissions of intermediate treatment and observing the
status of wastes, we offer the best solutions to our customers.
Appeal
point
With the proposals of waste treatment and/or Resources-Recycled
Products, we do our best for the customers to reduce environmental
impacts and treatment costs in all aspects.
Based on our reliability and performance, we have dealing with more
than 2,000 customers nationwide.
Appeal
point
Recycling amount: 74,000t in FY2011
ContactAdministration Department Subsection chief
Recycling and waste treatment Waste plastic, liquefaction
Description
of business
Optimized processing and recycling of various waste materials with application of technologies in dyeing equipment
manufacturing. Waste plastic liquefaction devices, kitchen garbage processing plants, carbonization devices,
sludge treatment devices, etc.
Waste plastic liquefaction devices Product picture, flow diagram, etc.
Product
features/
character
istics
Liquefaction & recycling of waste plastic
Waste plastic put into the pyrolysis tank of the device turns into gas
through thermolysis. The gas is reformed (with carbon chain cutting)
through catalytic action in the catalysis tank.
Later, it is cooled in the condensers, liquefied and recovered as recycled
oil. The 1st condenser recovers oil with high boiling point by cooling at
higher temperature. The 2nd condenser cools the oil at low temperature
for recovery of oil with low boiling point.
Testing is possible before installation. Also, total solutions from
preprocessing target waste to treatment of residual matter are also
offered.
Customers
Thermal recycle
Material recycle
Reuse
Feedstock for recycle
Recycle
Reuse products
Resource-recycling products
Products for fuel
Reuse
Reutilization products
Recycling of resources
Utilization as energy source
49 ★ Detailed Information Available
G) Recycling and waste treatment
No. G-37 President
Category Keyword
Product/ser
vice name
Applicable
field
Address 1361-1 Tozenji, Fujiwara-cho, Inabe-shi, Mie 511-0515, Japan
Katsuyoshi OKA
http://www.taiheiyo-cement.co.jp Tel: +81-594-46-2513 Fax: +81-594-46-2212
No. G-38 ★ TAKAGI CHEMICALS, INC. President Hiroyuki TAKAGI
Category Keyword
Product/ser
vice name
Applicable
field
Address 21-1 Horita, Oobata-cho, Okazaki City, Aichi 444-3502, Japan
Katayose Factory Factory manager Noriaki TAKAGI
http://www.takagi-kagaku.jp Tel: +81-564-82-2030 Fax: +81-564-82-3605
TAIHEIYO CEMENT CORPORATION Fujiwara Plant Shuji FUKUDA
Fujiwara Plant, Manufacturing Division, Manufacuturing Section
Power companies, iron and steel industry, cleaning factories, sewage companies, and other local governments and industries
Recycling and waste treatment
Appeal
point
• We usually accept and process wastes throughout a year.
• We detoxify wastes through high-temperature incineration process at
1,450°C and turn them into resources.
• We can accept and process a few kilograms to few tons of wastes.
Product
features/
character
istics
[Alternative materials]
Sewage sludge, soil generated at construction sites, processing of
incinerated ash (containing coal ash) (also acid and alkali waste, animal
and plant residue, metal scraps, glass scraps, slags, etc.)
[Alternative fuel]
Processing of waste plastics, wooden scraps, paper scraps, used tires,
rubber scraps, waste oil, fiber scraps, and ASR
We use wastes which are difficult to handle in other industries as
alternative materials and fuels.
Contactkatsuyoshi_oka@taiheiyo-cement.co.jp
Description
of business
TAKAGI CHEMICALS, INC. is pursuing possibilities of novel materials through the development and manufacture of
three different type products, resin casting, sheet metal pressing/surface finishing and manufacturing of synthetic
fiber.
Appeal
point
We received a regional incentive for technology research and development from the
Chubu Bureau of Economy, Trade and Industry to develop the flame-retardant fiber.
Subsequently, we developed our "hybrid flame resistance technology" with strategic
support to improve fundamental technologies, and developed a variety of environmentally-
friendly flame resistance fiber products and community-based recycling systems.
Product
features/
character
istics
Sewage sludge, incinerated ash, waste plastic, waste tire, resource recycling
Description
of business
Cement industry, material businesses, and environmental businesses in Japan and overseas businesses. Waste is
processed as material recycling and thermal recycling in a cement production process.
Environmental business: Detoxification of wastes and
transformation of the wastes into resourcesProduct picture, flow diagram, etc.
Contact
Automobile interior parts, disaster-related products
noriaki.takagi@takagi-kagaku.co.jp
Recycling of PET bottles Product picture, flow diagram, etc.
Recycling and waste treatment PET staple fiber, flame resistance
Our recycling technology to recycle waste PET bottles into staple fiber was developed for
the first time in the world in 1972, and we have been working to create high added value
products since then.
- Environmentally-friendly flame resistance was added to the recycled PET fiber. The
flame-retardant fiber does not require conventional flame resistance backing material, and
thus enables single material composition, allowing light-weight products, improvement of
recycling rate and cost reduction. The flame-retardant fiber has superior flame resistance
compared with existing flame resistance fiber.
- Through the establishment of basic technologies by industry-university-government
collaboration and the expansion to a wide range of areas, we continue to work on activities
to raise awareness of resource recycling in cooperation with local municipalities.
The flame-retardant fiber burning
experiment
■ Cement production process and waste residue and byproducts
Limestone
Raw materials
Raw material mill
Rotary kiln
Finishing mill
Raw material preparation and
crushing process
Limestone and raw materials are mixed and dried and then crushed in the raw material mill.
After pre-heating, the materials are burned in the rotary kiln. The materials are then quickly cooled, and a semi-finished product called clinker is produced.
A small amount of gypsum is added to the clinker, which is then crushed in the finishing mill, and cement is produced.
Wastes used and byproducts
Raw materials
Coal ash, sludgeNon-ferrous slag, steel making slag,
soil generated from construction sites, foundry sand
Raw materialsIncinerated ash, fly ash, waste acid and alkali, animal and plant residue, metal scraps, used clay, sewage sludgeFuelWaste oil, waste plastic, waste tire, and wooden chips, recycled oil, BOF, ASR, paper scraps, rubber scraps, fibers
Gypsum
Desulfurized gypsum, gypsum as chemical byproduct
Mixed materialSlag powder, fly ash
Fujiwara Plant
■ Cement production process and waste residue and byproducts
Raw materials
Coal ash, sludgeNon-ferrous slag, steel making slag,
soil generated from construction sites, foundry sand
Raw materialsIncinerated ash, fly ash, waste acid and alkali, animal and plant residue, metal scraps, used clay, sewage sludgeFuelWaste oil, waste plastic, waste tire, and wooden chips, recycled oil, BOF, ASR, paper scraps, rubber scraps, fibers
Gypsum
Desulfurized gypsum, gypsum as chemical byproduct
Mixed materialSlag powder, fly ash
Fujiwara Plant
Raw material mill
Limestone
Raw materials
Raw material preparation and
crushing processFiring process Finishing process
★ Detailed Information Available 50
G) Recycling and waste treatment
No. G-39 ★ President
Category
Product/ser
vice name
Applicable
field
Address 2321-2 Dachicho, Toki City, Gifu 509-5401, Japan
Development Department, Manager Motoharu SUZUKI
http://www.takasago-inc.co.jp Tel: +81-572-59-1234 Fax: +81-572-59-2033
No. G-40 TAKAYASU CO., LTD. President Yoshihide TAKAYASU
Category Keyword
Product/ser
vice name
Applicable
field
Address 3-47, Sohara Murasame-cho, Kakamigahara City, Gifu 504-0828, Japan
Fiber Department Director Chihiro WATANABE
http://www.takayasu-rf.co.jp/ Tel: +81-58-382-2231 Fax: +81-58-380-1121
watanabe@takayasu-rf.co.jp, gosen@takayasu-rf.co.jp
Recycling and waste treatment Rotary kiln, recycling, dry distillation, carbonization facility, biofuel
Takasago Industry Co., Ltd. Tatsuya SUZUKI
Description
of businessDevelopment, design, production, and sales of rotary kilns for dry distillation and carbonization of organic matters
Product
features/
character
istics
The lineup of carbonization facility includes the continuous external heat-
type gas-heated rotary kiln, batch-type rotary kiln, and continuous
internal-combustion rotary kiln. We develop and produce unique heat
treatment systems to respond to the needs of our customers such as
special atmosphere and usual atmosphere as well as specific purposes
as the professional of heat treatment system.
Appeal
point
motoharu_suzuki@takasago-inc.co.jp
Recycling and waste treatment Plastic, fiber, non-woven fabric
Description
of business
As a pioneer in macromolecular chemical recycling and application, waste plastics that are particularly difficult to be
recycled are being recycled and reused as material.
Carbonization facility business
Takayasu Ester, recycled discontinuous polyester fiber, and
Cyclean
Product
features/
character
istics
- Takayasu Ester is being manufactured by recycling PET bottle scraps
and waste film from plants and processed into fiber. It is delivered to
various manufacturers as non-woven fiber, yarn, etc.
1. It can be dope-dyed (pigment dyeing).
2. Processing can be done for relatively small lots.
3. High-added-value processing is possible, including resistance to
bacteria and odor and fire resistance.
4. This is an effective means to acquire Eco Mark certification.
- Cyclean uses used PET bottles.
- The material is used as raw material for automobile interior materials,
uniforms, non-woven fabric, etc.
Appeal
point
1978: Award from Japan Clean Center
1998: Award from Recycling Promotion Council (presently 3R Suishin
Kyokai)
2006: Special Recognition from Medium and Small Business Research
Institute
Local government corporation, sewage companies, Doei Shigyo, Kyokuto Kaihatsu Kogyo
Contact
Automobile industry, apparel interlining cloth, etc.
Contact
Product picture, flow diagram, etc.
We develop and produce customized heat treatment systems for
individual customers while listening to their requests and repeating tests
using our test furnaces and also providing advises based on test results
as the processional of heat treatment facility. We can provide stable
services because we offer an integrated service including development,
design, production, and maintenance.
Gas-fired rotary kiln
Internal combustion rotary kiln
Batch-type rotary kiln
material: PET yarn-making
cutting stretching
Takayasu Ester
51 ★ Detailed Information Available
G) Recycling and waste treatment
No. G-41 President
Category Keyword
Product/ser
vice name
Applicable
field
Address Nu161-4,Hamamachi,Nomi,Ishikawa,Japan 929-0124
Managing Director Mikio UMEKAWA
http://www.tecone.co.jp Tel:+81-76-155-0761
No. G-42 TOIDEKASEI CO., LTD. President Toshio TAKAHATA
Category Keyword
Product/ser
vice name
Applicable
field
Address 414 Toide Nishibukanaya, Takaoka City, Toyama 939-1114, Japan
President Toshio TAKAHATA t.takahata@h-tkc.co.jp
http://h-tkc.co.jp/ Tel: +81-766-63-5152 Fax: +81-766-63-5099
TEC ONE Co., Ltd. Tadahiko TAKEDA
Recycling and waste treatment Kitchen garbage decomposition system
Product
features/
character
istics
We signed an sales agency contract with Sinkpia Japan to sell this product.
This machine “disposes of kitchen garbage on the spot without transporting or
burning them” and instead by biologically decomposing them.
This machine decomposes kitchen garbage containing edible materials into water
and carbon dioxide.
This machine uses biological decomposition and does not require maintenance.
Our agent visits each customer once every six month to service the machine.
For business use: The lineup includes 20 kg, 30 kg, 50 kg, 100 kg, 150 kg, 250 kg,
and 500 kg of daily processing capacity.
For household use: Only the 1 kg type is available. This type is directly built into a
kitchen sink.
Appeal
point
Description
of businessMolding and sales of various plastic products
Meal supply centers for hospitals and schools, restaurant industry including hotels, household appliance
companies, households
m-umekawa@tecone.co.jp
Comparison of wood-plastic composite
(WPC)
The material has been used for construction parts, office supplies, automobile interior decoration goods, household
appliances, etc.
Contact
Product
features/
character
istics
We have developed an environment-friendly resin not found in existing
high-filling residence by making use of low-use resources, such as
thinned cedar wood, seashells and other biomass materials, as well as fly
ash (incinerated coal ash) discharged by coal-charged thermal power
plants, for conversion into micro-filler under pressurized steam and
uniform dispersion with resin (Patent No. 46605285(JP)).
- Stable molding is possible at mixture rate of resin as high as 70%.
- At present, development is underway to create products by mixing
high-melting point resins. it is also possible to manufacture high-
performance residence with attention to fire and weather resistance.
Biomass material manufacturing technology (micro-filler
technology)Product picture, flow diagram, etc.
Fax:+81-76-155-4175
Materials developed by our company will enable reduction of carbon
dioxide emission through replacement of petrochemical-derived resins by
environment-derived resins. At the same time, our contribution to the
development of a recycling society has been recognized with certification
as a project subsidized in the FY 2012 Takaoka Industrial & Cultural
Promotion Fund .
Sales of kitchen garbage decomposition system Product picture, flow diagram, etc.
Recycling and waste treatment Biomass-related, composite plastic material
Description
of businessSynthetic fabrics dyeing and finishing process
Contact
Appeal
point
Dryer or deodorizing system is not necessary.
This machine can be installed indoors.
The microbial biomass and bacterial bed provide extremely high
processing capacity and make this system compact and low cost.
Conventional WPC TOIDE's WPC
Wood powder observed on
surface
Good appearance
Coarse particles are observed.
Particles become fine fibrous
★ Detailed Information Available 52
G) Recycling and waste treatment
No. G-43 ★ Tokai Bio, Ltd. President Morie TSUGE
Category Keyword
Product/ser
vice name
Applicable
field
Address 2-247 Nabeyama, Osashima-cho, Ena City, Gifu 509-7211, Japan
Technical and Sales Department
http://www.tokai-bio.com/ Tel: +81-573-28-0061 Fax: +81-573-28-0062
No. G-44 ★ Tokai Techno Co., Ltd. Junichi ICHIDA
Category Keyword
Product/ser
vice name
Applicable
field
Address 2-4-18 Umaokoshi, Yokkaichi City, Mie 510-0023, Japan
Environment Division Kazuhisa KITADE k-kitade@tokai-techno.co.jp
http://www.tokai-techno.co.jp Tel: +81-59-340-7767 Fax: +81-59-333-8055
We would like our products to be used by fishery cooperatives who have
difficulties in disposing of shells and people concerned with the fishing
industry who wish to create seaweed beds.
tsuge@tokai-bio.com, info@tokai-bio.com
Contact
Product
features/
character
istics
- This product is produced by solidifying in a safe and special process the
principle raw materials such as oyster shells and other shells including
scallop shells.
- In addition to fertilizer applications, the product is highly effective in
cultivating and promoting the growth of natural Manila clams and clams.
- Setting the in the ocean quickly creates a seaweed bed, which has
been proved to serve as a feeding area for marine organisms that eat
abalones and lobsters.
"Careshell"
Appeal
point
Appeal
point
Several ten places in Japan
Customers: MLIT, prefectures, neighboring municipalities, household electrical appliance manufacturers,
construction companies, agricultural judicial persons, etc.
Contact
Recycling and waste treatment
Description
of business
Environmental measurement/analysis and maintenance of measuring instruments, product quality evaluation, and
assisting research of new energy and resource recycling
"Careshell", marine life growth promoting/marine
environment restorative material made from oyster shellsProduct picture, flow diagram, etc.
Kiyoshige TSUGE
President&CEO
Composting, consulting
Description
of business
Converting mowed riverside grass (organic waste) into bio-compost; organic waste treatment; selling high-
performance soil improvement material and wood chips; waste treatment consulting; and environmental
improvement consulting; etc.
Converting organic waste into bio-compost with the
"BES"(bio-eco-system)Product picture, flow diagram, etc.
Product
features/
character
istics
We provide an eco-system for composting organic waste with bio-
bacteria, improving malodor issues, re-cultivating run-down fields, and
composing night soil sludge.
- Organic soil from 1000 m3 can produce approximately 500 m3 of bio-
fertilizer.
- This technology turns various organic waste to bio-fertilizer in as short
as 60 to 90 days.
- It converts organic waste into 5,000 tons of compost per year.
Regular Turning (for Approximately 3
Months)
2012: "Organic Waste Site Composting Method (Local Production for
Local Consumption Method)" was registered in the New Technology
Information System (NETIS) (No. CB-110049-A) by the Ministry of Land,
Infrastructure and Transport (MLIT)
Recycling and waste treatment
Oyster shell, shell, shellfish cultivation, seaweed bed
Natural
Natural nutritional supplement made from solidified oyster
Pellet
large size (
53 ★ Detailed Information Available
G) Recycling and waste treatment
No. G-45 TOYOKIN CO., LTD. President Naoto FUJIWARA
Category Keyword
Product/ser
vice name
Applicable
field
Address 3-33, Kounosu-cho, Toyota City, Aichi 471-0836, Japan
Sales Department Assistant director Hideo SATO Hideo.Sato@toyokin.co.jp
http://www.toyokin.co.jp Tel: +81-565-28-2222 Fax: +81-565-28-7585
No. G-46 ★ President
Category Keyword
Product/ser
vice name
Applicable
field
Address 1-32 Amakasugashinmachi, Yokkaichi City, Mie 510-8002, Japan
President Keiji UESUGI
http://www.uesugi-p.co.jp/ Tel:+81-59-365-6800
Factories of businesses located in the Tokai region, mainly in Mie
Contactkeiji@uesugi-p.co.jp
Fax:+81-59-363-2055
Sorting non-ferrous metal wastes and processing and selling
copper materialsProduct picture, flow diagram, etc.
Product
features/
character
istics
We sort and collect copper and copper alloy from wastes such as electric
wires, copper pipes, copper plates, and copper alloy (brass-coated metal,
etc.). We then turn them into chips to be sold as cooper material.
We form the copper material into shapes which satisfy needs of our
customers.
Appeal
point
A proper recycling requires the proper sorting of materials and types.
We are properly collecting and transporting wastes, of course, and
dismantling and sorting them at specific points to ensure proper and
effective recycling.
(Accepts LLC) Automobile dealers
Contact
Recycling and waste treatment Non-ferrous metals, copper, recycling
Description
of business
Recycling of non-ferrous metals, metals, and covered wires; recycling of precious metals and printed substrates;
demolition work in general; water treatment; zero-emission work; medical waste treatment; memory and support
work (sorting and disposal of items left behind by the diseased)
Uesugi Co., Ltd. Keiji UESUGI
Engine cooling water (LLC) microorganism treatment Product picture, flow diagram, etc.
Product
features/
character
istics
Waste LLC Microorganism Treatment Plant, based on Ethylene Glycol-
contained water treatment method and microorganism, performs
continuous type microorganism treatment; the Carrier Fluid Bed Method
(excellent in the affinity for microorganism and possible to treat high-
efficiently) and the Membrane Separation Activated Sludge Method
(stable and advanced treatment water quality can be always obtained)
are used together. Nearly 100% high concentrated Ethyl Glycol is able to
be removed through the function of this microorganism.
Waste treatment plantAppeal
point
Detoxifying waste that used to be incinerated to be safely released back
into the environment.
Winner of excellent prize of "2006 Aichi environmental prize "excellent
prize winning
Industry collaboration (Collaborative research with Toyota Central R&D
Labs., Inc. and Meidensha Corporation)
Recycling and waste treatment Waste liquid treatment, microorganisms
Description
of business
Metal resources recycling/processing, logistics, waste management, building demolition, fluorescent light recycling,
appropriate treatment of end-of-life vehicles, rental and management of forklifts/vehicles for work at height, damage
insurance agent, etc.
配線
工場
部品
工場
ハーネス
工場
ワイヤーハーネスのナゲット処理工程へ
導体屑 被服廃材 電線屑 端子屑 ハウジング屑 ハーネス屑 (余剰品・不良品)
溶解・精製 再ペレット ナゲット処理銅回収
端子屑 粉砕 ナゲット処理 銅・銅合金回収
電線導体 再生チューブ 銅合金製品 ハウジング
リサイクル/埋め立て リサイクル/埋め立て
WiringFactory
ComponentFactory
HarnessFactory
Electric
conductor
scraps
Clothes scraps
Electric wire scraps
Connector scraps
Housing scrapsHarness scraps
(extra products and defective products)
Nugget processing
Collection of copper
and copper alloy
MillingConnector scraps
Nugget processing
Collection of copperRecycled pelletMelting and
refining
Electric wire and conductor
Recycled tube Product made of copper alloy
Housing
Recycling/Reclamation
Recycling/Reclamation
To the nugget process of wire harness
★ Detailed Information Available 54