Post on 23-Jan-2020
Furlex 50S.For yachts from 18 to 26 feet.
TheFurlexjibfurlingandreefingsystemisavailable insevensizes–20S(seeSeldénDinghycatalogue),50S,100S,200S,300S,400Sand500S.Therightmodelforyoudependsonthesizeofyouryachtandthetypeofrig.Allmodelsarecharacterisedbyelegantlinesandsuperiorperformance,derivedfromacarefullyconsidereddesigndowntothesmallestdetail.
Furlex 200S-300S.For yachts ranging from 30 feet to approx. 45 feet.
Furlex S (Standard)
Furlex 400S-500S. For larger yachts rang-ing from approx. 45 feet to approx. 70 feet.
Furlex 100S. For yachts up to approx. 30 feet.
116
Furlex benefits
•Centredandinsulatedforestayandcompletelyinsulatedjoiningsleevesmakefurlingeasier,reducewearandcutout theriskofcorrosion.
•Unique,patentedload-distributorforeasyfurlingandunrivalledbearingdurability.Lightweighthalyardswivelkeepsweightalofttoaminimum.
•Sailfeederinhighgrade,marinestainlesssteelforimproveddurabilityandservicelife.Compositeconnectorfortheoptimumstrength-to-weightratio.
Furlex50S.Halyardswivelincompositewithstainlesssteelreinforcement.Lowweight(230g).Lowfrictionduetotheloaddistributor.
•Furlex100S–500S.Tackswivelwithafree-turn,combinedwiththeuniformprofileoftheforestayextrusion,giveaperfectlyfurledsailandeffectiveperfor-manceevenwhenreefed.Twingroovesandsplitdrum–allowforfastsailchangesandmakeFurlexeasilyadaptedforracing.
•Uniqueline-guidesystem–controlsandcentresfurlinglineandarrangesitevenlyontothedrum.
•Furlex200S–500S.Fullyintegralriggingscrew(optional)forfastandsimplefore-stayadjustment,withoutaffectingtheuniformprofileoftheextrusionorthedrumheightabovedeck.Theriggingscrewadjuststhrough60mm,80mm and100mmdependingonsizeofsystem.
TheFurlex100Shasnointernalriggingscrew.However,anoptionalexternalriggingscrewforthe100Smodel(6mmwire), formountingunderthedrum,isavailable.
117
WithaFurlex100S-500Sonboard,youcanquicklyadaptyouryachtforracing.Thelinedrumandlineguidefittingareeasilyremoved,enablingyoutotackthesaildirectlytothedeck.Detachthesailfeeder,andthehalyardswivelcanbedroppedrightdowntothelowerbearingassembly.Reassembleit,andtheforestayextrusionisnowreadyforracing.Theextrusionfeaturestwinluffgrooves,givingyouthepotentialforfast,race-winningsailchanges.
Benefits when racing
118
rodfä
ste
Furlex with rod forestay
BushingsforNavtec,BSIandOYSrodsareavailablefromSeldén.Yourrodriggerwillsupplytherodforestayandupper terminalpart,slideonthejoiningsleeves,rodbushingandSta-lokholescrew,andformyourrodheads.
Alternative 1: Rod is to be formed at the location of the boat.Alternative 2: Rod is to be formed remote from the boat.These set of extrusions, both alternatives, include slotted distance tubes to be snapped on to the headed rod.
Standard eye terminal
Sta-lok hole screw
Rod bushing
Extrusions and joining sleevesIftherodriggerislocatedfarfromtheboat,itispracticaltoprovidehimwithaseparatekitofjoiningsleeves.Thiswayhecancoiltheformedrodstayanddelivertotheboatforfinalassembly.Asetofluffextrusions,excludingjoiningsleeves,shouldalsobedeliveredtotheboat.
Bush packs** Includes instructions, bushing and a Sta-lok hole screw. Always needed for rod installation.
Rod Diameter mm
Type of Furlex
Series Art. No. Art. No. TDS/E TD H
Navtec -8 5.7 200 X X 301-407-02 301-407-03
Navtec -10 6.4 200 X X 301-408-02 301-408-03
Navtec -12 7.1 200/300 X X X 301-409-02 301-409-03
Navtec -17 8.4 300 X X X 301-413-02 301-413-03
Navtec -22 9.5 300 X X X 301-410-02 301-410-03
Navtec -30 11.1 400 X X 301-411-02 301-411-04
Navtec -30 11.1 400 X 301-411-03
Navtec -40 12.7 400 X X 301-412-02 301-412-04
Navtec -40 12.7 400 X 301-412-03
Navtec -48 14.3 500 X 301-616-02
OYS (Riggarna) R-8 5.7 200 X X 301-401-02 301-401-03
OYS (Riggarna) R-10 6.4 200 X X 301-402-02 301-402-03
OYS (Riggarna) R-15 7.5 200/300 X X X 301-403-02 301-403-03
OYS (Riggarna) R-22 9.5 300 X X X 301-404-02 301-404-03
OYS (Riggarna) R-30 11.1 400 X X 301-405-02 301-405-03
OYS (Riggarna) R-30 11.1 400 X 301-405-03
OYS (Riggarna) R-40 12.7 400 X X 301-406-02 301-406-03
OYS (Riggarna) R-40 12.7 400 X 301-406-03
OYS (Riggarna) R-48 14.3 500 X 301-615-02
BSI -8 5.7 200 X X 301-418-02 301-418-03
BSI -10 6.4 200 X X 301-419-02 301-419-03
BSI -12 7.1 200/300 X X 301-415-02 301-415-03
BSI -15 7.5 200/300 X X 301-420-02 301-420-03
BSI -17 8.4 300 X X 301-417-02 301-417-03
BSI -22 9.5 300 X X 301-721-02 301-421-03
BSI -22 9.5 400 X 301-424-04
BSI -30 11.1 400 X X 301-422-02 301-422-04
BSI -30 11.1 400 X 301-422-03
BSI -40 12.7 400 X X 301-416-02 301-416-04
BSI -40 12.7 400 X 301-416-03
BSI -48 14.3 500 X 301-634-02
Furlex S/E Furlex TD
Furlex series
Max. length, mm Alternative 1: Complete set of extrusions
Alternative 2: Set of extrusions
excl. joining sleeves
Separate kit of joining sleeves
Alternative 1: Complete set of extrusions
Alternative 2: Set of extrusions
excl. joining sleeves
Separate kit of joining sleeves
S/E TD
200S 10600 10400 539-565-12 539-565-22 539-567-01 539-565-42 539-565-52 539-729-01
2400 2400 (extra extrusion) 539-565-16 539-565-26 539-565-16 539-565-26
300S 15500 15200 539-265-12 539-265-22 539-267-01 539-265-42 539-265-52 539-739-01
2400 2400 (extra extrusion) 539-265-16 539-265-26 539-265-16 539-265-26
400S 17700 17400 539-165-12 539-165-22 539-167-02 539-165-42 539-165-52 539-759-02
2400 2400 (extra extrusion) 539-165-15 539-165-25 539-165-15 539-165-25
500S 23000 - 539-423-11 539-423-21 539-427-11 - - -
4800 - (extra extrusion) 539-423-10 539-423-20 - -
119
Choose the right Furlex
Simple to install, easy to maintainItonlytakesacoupleofhourstofitaFurlexsystemtoyouryacht.AstheFurlexkitcomescompletewithallthematerialsandafullsetofinstructions,youcaneasilyfitityourself.WhenyoufitaFurlexyouhaveinvestedinavirtuallymaintenance-freepieceofkit.Yousetyoursailafterlaunchingandthenjustkeeponfurlingandreefingthroughouttheseason.Whentheseasonisoveryousimplyrinsethevariouspartswithfreshwater,waitforthemtodryandthengreasethehalyardswivelandlowerbearingassemblies.TheFurlexkitevenincludesthegrease.Whatcouldbesimpler?
The optional rigging screw for Furlex 200S- 500S.
Furlex 50S-300SSpare stanchion block 538-971-01 (1 off)538-971-02 (4 off)
* As the male part of this rod terminal type/size is too large to pass through the luff extrusions, the rod forestay can only be cold-headed at its upper terminal end after the stay has been pulled through the assembled extrusions. The extrusion must be made 200 mm (8") shorter than the stay at the top to make room for the cold-heading machine. Consequently, the luff extrusions length and available sail space is reduced. The system has to be assembled at the location of the cold-heading machine. ** The upper eye terminal must be of the MNY type.
Complete kit containing everything you need:• Forestay wire• Wire terminal• Halyard swivel• Lower bearing part• Split line drum (100S-500S)• Line guide fitting• Line drum housing• Furling line• Halyard lead, insulating sheet, screws• Drill bit• Torx key set • Stanchion blocks • Locking adhesive• Lubricating grease• Top guard• Luff extrusion• Joining sleeves• Connecting plate• Sail feeder• Prefeeder• Manual, spare parts list• Certificate of guarantee
Furlex series
Forestay dia., mm
Rod dia.
(mm)
Navtec OYS** (Riggarna)
BSI Max righting moment (kNm) at 30º heel
Approx. displacement, tonnes
DH mm
DW mm
DD mm
CB mm
E mm
ID mm
W2 mm
D2 Clevis
pin
Forestay adjustment
dia., mm
Extension link
H mm
Halyard sheave box
Art. No. Masthead rig Fractional rig Masthead rig Fractional rig
50S 4 - 6.5 8 1.4 1.7 100 60 120 25 215 17 8.5 8 - - 505-004-10
5 - 8.5 11 1.8 2.5 100 60 120 25 215 19 11 10 - - 505-004-10
100S 4 - 6.5 8 1.4 1.7 100 80 152 60 280 17 8.5 8 - - 505-004-10
5 - 10 14.5 2.1 3 100 80 152 60 280 19 11 10 - - 505-004-10
6 - 17 22 3.5 4 100 80 152 60 280 24 11 10 50 90 505-006-10
200S 6 -8 (5.7) X X X 19 23 3.9 4.5 120 94 186 60 330 24 11 10 60 90 505-006-10
7 -10 (6.4) X X X 27 34 5.5 7 120 94 186 60 330 24 12.5 12 60 90 505-006-10
8 -12 (7.1) X X 37 45 7.5 9 120 94 186 60 330 31 15.5 14 60 130 505-012-10
-15 (7.5) X* X*
300S 8 -12 (7.1) X X 40 50 8 10 147 113 216 80 400 31 15.5 14 80 130 505-012-10
-15 (7.5) X X
10 -17 (8.4) X X 70 80 14 15 147 113 216 80 400 34 16 16 80 130 505-012-10
-22 (9.5) X X X
400S 12 -30 (11.1) X X X 120 160 20 26 200 140 250 95 535 40 21 19 100 190 505-012-10
14 -30 (11.1) X X 180 190 28 30 200 140 250 95 535 50 23 22 100 190 505-012-10
-40 (12.7) X X X
500S 16 -40 (12.7) X X X 230 250 38 40 200 140 250 95 535 50 26 22 100 - 505-038-10
-48 (14.3) X X X
120
WLG
DLG
WLG
DLG
WLG
DLG
DW
DD
E
DH
*FL
CB
ID
D2
W2
H
Furlex standard toggle. Extension link: Used to increase the distance between the lower unit and the deck for a bow anchor etc.
Furlex is available with Dyform wire. Please ask your dealer for details.
*FL = forestay length
Furlex 50S
Furlex 100S
Furlex 200S–500S
Furlex series
Forestay dia., mm
Max. forestay
length (FL) m
Art. No. Standard version
Art. No. Incl.
rigging screw50S 4 7.7 022-015-51 -
4 10.1 022-015-52 -
5 7.7 022-015-53 -
5 10.1 022-015-54 -
5 12.5 022-015-55 -
100S 4 8.1 027-019-51 -
4 10.5 027-019-52 -
5 8.1 027-019-53 -
5 10.5 027-019-54 -
5 12.9 027-019-55 -
6 10.5 027-019-56 -
6 12.9 027-019-57 -
200S 6 10.6 031-021-51 031-021-61
6 13.0 031-021-52 031-021-62
6 15.4 031-021-53 031-021-63
7 13.0 031-021-54 031-021-64
7 15.4 031-021-55 031-021-65
7 17.8 031-021-56 031-021-66
8 15.4 031-021-57 031-021-67
8 17.8 031-021-58 031-021-68
300S 8 15.5 039-027-51 039-027-61
8 17.9 039-027-52 039-027-62
10 15.5 039-027-53 039-027-63
10 17.19 039-027-54 039-027-64
10 20.3 039-027-55 039-027-65
400S 12 17.7 049-034-51 049-034-61
12 20.1 049-034-52 049-034-62
12 22.5 049-034-53 049-034-63
14 20.1 049-034-54 049-034-64
14 22.5 049-034-55 049-034-65
500S 16 23.0 060-046-56 060-046-66
16 27.8 060-046-57 060-046-67
Furlex series Internal diameter of luff groove (DLG), Ø mm
Width of luff groove (WLG), mm
50S 6.0 2.6
100S 6.0 3.0
200S 6.0 3.0
300S 7.5 3.0
400S 8.0 3.0
500S 9.2 3.0
Furlex series
Forestay dia., mm
Rod dia.
(mm)
Navtec OYS** (Riggarna)
BSI Max righting moment (kNm) at 30º heel
Approx. displacement, tonnes
DH mm
DW mm
DD mm
CB mm
E mm
ID mm
W2 mm
D2 Clevis
pin
Forestay adjustment
dia., mm
Extension link
H mm
Halyard sheave box
Art. No. Masthead rig Fractional rig Masthead rig Fractional rig
50S 4 - 6.5 8 1.4 1.7 100 60 120 25 215 17 8.5 8 - - 505-004-10
5 - 8.5 11 1.8 2.5 100 60 120 25 215 19 11 10 - - 505-004-10
100S 4 - 6.5 8 1.4 1.7 100 80 152 60 280 17 8.5 8 - - 505-004-10
5 - 10 14.5 2.1 3 100 80 152 60 280 19 11 10 - - 505-004-10
6 - 17 22 3.5 4 100 80 152 60 280 24 11 10 50 90 505-006-10
200S 6 -8 (5.7) X X X 19 23 3.9 4.5 120 94 186 60 330 24 11 10 60 90 505-006-10
7 -10 (6.4) X X X 27 34 5.5 7 120 94 186 60 330 24 12.5 12 60 90 505-006-10
8 -12 (7.1) X X 37 45 7.5 9 120 94 186 60 330 31 15.5 14 60 130 505-012-10
-15 (7.5) X* X*
300S 8 -12 (7.1) X X 40 50 8 10 147 113 216 80 400 31 15.5 14 80 130 505-012-10
-15 (7.5) X X
10 -17 (8.4) X X 70 80 14 15 147 113 216 80 400 34 16 16 80 130 505-012-10
-22 (9.5) X X X
400S 12 -30 (11.1) X X X 120 160 20 26 200 140 250 95 535 40 21 19 100 190 505-012-10
14 -30 (11.1) X X 180 190 28 30 200 140 250 95 535 50 23 22 100 190 505-012-10
-40 (12.7) X X X
500S 16 -40 (12.7) X X X 230 250 38 40 200 140 250 95 535 50 26 22 100 - 505-038-10
-48 (14.3) X X X
121
3.3.e.eps
D1
D2
W2
H
D2
3.3.g.eps
W1
W2
H
D1
Stemball/eye togle.epsfr BOAB
H
HB
D1 R
W2
D2
3.3.heps, Toggle furlex
D2
D1
W1
W2
W2H
D2
H
Toggles
Iftheboatisfittedwithabowanchor,itmaybenecessarytopermanentlyraisethelowerbearingassemblyforanchorclearance.Aselectionofextensionlinksareavailable.
Ifthelowerbearingassemblyisraisedbymeansofanextensionlink,aFurlexfork/forktoggle,shouldbefittedbetweenthelinkandtheforestayattachment.
* The standard Furlex fork/fork toggle must always be fitted between the extension link and the forestay attachment of the boat. This in order to secure proper articulation in all directions.
Eye/fork toggle Forestay Art. No. Length H Ø Clevis pin Fork width Ø Eye dia., mm mm D2 mm W2 mm D1 mm
4 174-102-01 25 8 8 8
5 174-103-01 35 9.5 10 10
6 174-104-01 40 11 12 11
7 174-105-01 45 13 12 13
8 174-106-01 50 15.8 12 16
10 174-107-01 65 15.8 20 16
12 174-134-01 95 19 22 20
14 174-135-01 95 22 22 23
16 174-126-01 120 22 25 23
Standard Furlex Forestay Art. No. Length H Ø Clevis pin Ø Clevis pin Fork width Fork width fork/fork toggle dia., mm mm D1 mm D2 mm W1 mm W2 mm
4 517-056-02 25 8 8 7.5 8.5
5 517-054-02 30 10 10 10 11
6 517-046-02 40 12 10 11 11
7 517-047-02 40 12 12 11 12.5
8 517-048-02 50 14 14 14 15.5
10 517-060-04 55 16 16 14 16
12 517-052-02 65 19 19 20.5 21
14 517-053-02 80 22 22 20.5 23
16 517-074-02 85 25 22 22 26
T/fork toggle Forestay Art. No. Length H Ø Clevis pin Fork width dia., mm mm D2 mm W2 mm
4 174-127-01 60 8 8
5 174-128-01 70 9.5 10
6 174-122-01 80 11 12
7 174-123-01 90 13 14
8 174-124-01 100 15.8 16
Stemball/Eye toggle Forestay Art. No. Length H Ø Clevis pin Fork width Heigth HB Radius R Ø Stemball with Fork/fork toggle dia., mm mm D2 mm W2 mm mm mm D1 mm
5 517-065-01 138 10 11 8.5 10 26
6 517-066-01 152 10 11 8 10 26
7 517-067-01 157 12 12.5 9 15 34
7 517-097-01 153 12 12.5 11 13 26
8 517-068-01 197 14 15.5 9 15 34
10 517-068-02 202 16 16 9 15 34
12 517-069-01 226 19 21 8.5 15 34
Eye/Fork extension link* Forestay Art. No. Length H Ø Clevis pin Fork width Ø Eye Gauge dia., mm mm D1 mm W1 mm D2 mm W2 mm
6 517-063-01 90 12 11 12 6
7 517-063-01 90 12 11 12 6
8 517-062-01 130 16 14 16.5 10
10 517-062-01 130 16 14 16.5 10
12 517-075-01 190 19 20.5 20 12
14 517-076-01 190 22 20.5 22.5 16
Can be used to lengthen a Furlex system. Fit it underneath the standard fork/fork toggle or at the top end of the Furlex wire.
Needed to connect the Furlex to a Seldén backing plate for T-terminals.
Needed when fitting Furlex to some masts of other origin than Seldén.
122
123