LOGO

For What Do We Need The Configuration

TestingQuality is a rule

Office in UkrainePhone: +380-44-4067024E-mail: contact (at) qa-testlab.comAddress: 21, Garmatna str., Kiev, Ukrainehttp://qatestlab.com/

LOGO

www.themegallery.com

Contents

What is Configuration Testing1

Configuration Testing Service2

Goals of Configuration Testing3

The order of configuration testing

4 Objectives of Configuration Testing

5

LOGO

Configuration Testing

The process of testing a system with each of the configurations of software and hardware that are supported.

Office in UkrainePhone: +380-44-4067024E-mail: contact (at) qa-testlab.comAddress: 21, Garmatna str., Kiev, Ukrainehttp://qatestlab.com/

LOGO

QATestLab offers configuration testing service as a special type of testing to verify the operation of software for various system configurations (different platforms, supported drivers, different computer configurations, etc.).

Office in UkrainePhone: +380-44-4067024E-mail: contact (at) qa-testlab.comAddress: 21, Garmatna str., Kiev, Ukrainehttp://qatestlab.com/

LOGO

Goals of configuration

testing

Project on the profiling of the system

The purpose of testing: to determine the optimum configuration of equipment that provides the required performance characteristics and reaction time of  test system.

Project on migration from one platform to another

The purpose of testing: Check the system under test for compatibility with the declared in the specification hardware, operating systems and software products of third parties.

Office in UkrainePhone: +380-44-4067024E-mail: contact (at) qa-testlab.comAddress: 21, Garmatna str., Kiev, Ukrainehttp://qatestlab.com/

LOGOwww.themegallery.com

Determine an optimal system configuration

Report these failures to the development teams

The typical objectives of configuration testing are to:

Partially validate the application

Cause failures concerning the configurability requirements

Determine the effect of adding or modifying hardware resources

Office in UkrainePhone: +380-44-4067024E-mail: contact (at) qa-testlab.comAddress: 21, Garmatna str., Kiev, Ukrainehttp://qatestlab.com/

LOGO

The order of configuration testing

Create covering matrix - this matrix will contain all possible

configurations.

Conduct prioritization of configurations (in practice, most likely, it is impossible to check all of the desired configurations).

Test each configuration in accordance with the prioritization step by step.

Before the beginning of the configuration testing we do the following activities:

Office in UkrainePhone: +380-44-4067024E-mail: contact (at) qa-testlab.comAddress: 21, Garmatna str., Kiev, Ukrainehttp://qatestlab.com/

www.themegallery.comLOGO

Quality is a rule

Office in UkrainePhone: +380-44-4067024E-mail: contact (at) qa-testlab.comAddress: 21, Garmatna str., Kiev, Ukrainehttp://qatestlab.com/