Post on 18-Oct-2020
Line
ThermoThermoTHERMAL INSULATION AND DEHUMIDIFICATION
ALL-SEASONCOMFORT
• Thermal-dehumidifying cycle for interiors and exteriors• Thermal-insulating and dehumidifying cycle for interiors and exteriors• TechnoTherm, Thermal Insulation Composite Systems
Best comfort and energy saving with Thermo Line Systems characterized by high quality and easiness of application:
THE ADVANTAGES OF THERMO LINE:• It improves the quality of the home environment• It maintains a perfect microclimate at any season of the year: warm in winter, cool in summer• It is ideal for old and new buildings • It reduces CO2 emissions• It ensures excellent thermal insulation and excellent energy savings
The objective of the thermal insulation is to reduce CO2 emissions in the atmosphere; carbon dioxide emissions is due to the combustion processes developed during the production of energy necessary for heating or cooling our houses.To achieve this goal, it is necessary to "build well" reducing heat loss and energy consumption, eliminating thermal bridges to avoid the formation of condensation and mold growing with the consequent improvement of living comfort.
THERMAL-DEHUMIDIFYING CYCLE THE ADVANTAGESExcellent thermal and acoustic insulationEnergy savingBest living comfortReduction of CO2 emissions
The innovative line enhanced with PORAVER®
THE LIGHT CHARGES
THE FILLERS3M ™ Glass Bubbles are hollow glass microspheres with high strength, low density, made from soda-lime borosilicate glass. They are non-porous, chemically stable and resistant. Added to building materials, 3M GLASS BUBBLES give them:
- Dimensional stability - Reduced resin demand - Reflective properties - High filling and low viscosity - High performance - Low thermal conductivity - Resistance to thermal excursions of the walls and greater durability of the elements - Anti-mould and anti-condensation properties.In addition, they: - Prevent the formation of humidity on the walls - Reduce shrinkage and improve sand-blasting- Improve living comfort and energy efficiency
•
•
•
•
•
INDOOR
Thermo RinzaffoThermal-insulating and dehumidifying scratch-coat mortar with expanded glass
ThermofondThermal-insulating and dehumidifying plaster with expanded glass
Thermo RasaThermal-insulating and dehumidifying mineral smoother with expanded glass
ThermoStucFinishing thermal fine plaster for smoothing and filling
Formulated with 3M GLASS BUBBLE
Thermica INAnti-condensation, sanitizing and thermal water paint for interiors
Formulated with 3M GLASS BUBBLE
•
•
•
•
OUTDOOR
Thermo RinzaffoThermal-insulating and dehumidifying scratch-coat mortar with expanded glass
ThermofondThermal-insulating and dehumidifying plaster with expanded glass
Thermo RasaThermal-insulating and dehumidifying mineral smoother with expanded glass
Primer I-ReflexSiloxane primer forIR-reflective coatingsI-Reflex PaintIR-reflective acrylic-siloxane water paint,for exteriorsFormulated with 3M GLASS BUBBLES
FORMULATED WITH
3M GLASS BUBBLE
Poraver® expanded glass combines the ease of use with the maximum respect for the environment, reducing energy consumption, thermal transmittance and density of the product; it improves the vapor permeability; it also facilitates the application on irregular surfaces or on geometrically "non-linear" surfaces (even in the presence of rising damp, upon renewal).
OUTDOOR
DryWall Rinzaffo / Thermal scratch-coat mortar •
DryWall / Thermal plaster with polystyrene beads •
RasaPro Flex / Ultra-adherent, fibre-reinforced,mineral smoother
embedding Rete 155 gr, Etag 004 / Fiberglassnet with anti-alkali treatment
•
Primer and Paste coating •INDOOR
• Sal-Mur / Salt efflorescence inhibitor
• Asciugo Rinzaffo TD / Dehumidifying scratch-coat mortar
• Asciugo TD / Dehumidifying plaster
•
• ChiraSan / Breathable, silicate water paint for interiorsor ChiraSan SL / Breathable, acryl-siloxane water paint for interiors
RasaPro Flex / Ultra-adherent, fiber-reinforced,mineral smoother
THERMAL-INSULATINGAND DEHUMIDIFYING CYCLE
Ideal for dehumidification, buidingredevelopment and thermal insulation of internal and external walls subject to capillary rising damp.
The new system guarantees excellent performance of thermal insulation and restoration of surfaces, both internal and external, subject to rising damp. Thanks to the use of expanded polystyrene beads, it is possible to reduce thermal bridges and reduce energy consumption. The system guarantees excellent results thanks to the use of expanded polystyrene beads (non-toxic, CFCs and HCFCs free), which avoid the formation of mould and condensation.
ISTITUTO MASINI
Thermal insulatingAnti-condensationReduction of thermal bridges and energy consumption
THE FEATURES
Certified thermal conductivityBest living comfortReduced environmental impact
THE ADVANTAGES
•
•
•
•
•
•
Rasoflex A++ / Adhesive/Smoothing mortar forThermal Insulation Composite SystemsRS 500 Flex / Eco-friendly fiber-reinforced smoother/adhesive
EPS 100 Thermal insulating slabs/EPS 100 GrafitatoThermal insulating slabs with graphite according to EN 13163 or Insulating blond natural cork slabs for Eco-building
Fixing dowels in polypropylene ETAG 014
Rasoflex A ++ / RS 500 Flex and ETAG 004 Fiberglass net with anti-alkali treatment
Silicate primer Primer Siltex or acrylic primerPrimer al Quarzo or siloxane primer Primer Silox
Application of the adhesive Incorrect laying of adhesive Positioning of the panels in correspondence of the openings
Positioning of the net on the angle edges
MORE INFORMATION
TECHNOTHERM®,THERMAL INSULATION COMPOSITE SYSTEMS
Positioning of dowels
Application cycleThe surfaces must be sound, strong, planar, free of dust and loose parts. Position the basic profile well levelled and the first row of panels. Apply the adhesive on the panel and - after drying - proceed with the positioning of dowels; then continue with the application of the smoother with the net, the primer and the finish.
For further technical information on our products,visit the website www.chiraema.itPLUS: A NEW TOOLTo know how many packs of product you need to carry outyour project, check PLUS section on our website. Good work!
Silicate paste coating Rivestimento Effebi HS oracrylic paste coating Rustichello or siloxane pastecoating Kompasilos
Technotherm® System, thanks to the overlaying of specific materials, allows to create an excellent thermal insulation. It offers many advantages, such as improvement of living comfort, energy savings, elimination of thermal bridges, renewal and protection of walls.
Available in various solutions, it allows to combine different materials and colours, to satisfy both functional needs of thermal insulation and aesthetic needs, guaranteeing high quality finishes.
Warm outside Cold outside
Interior and exterior
thermal-dehumidifying cycle
Interior thermal-insulating and dehumidifying cycle
Exterior thermal-insulatingand dehumidifying cycle
Interior finishings
Primer and finish for exteriors
Thermal Insulation Composite Systems TechnoTherm
ECOBUILDINGby CHIRAEMA
OUR LINE FOR THERMAL INSULATION AND DEHUMIDIFICATION
MALTA DA MURATURA THERMOBedding mortar with expanded glassClassified G according to EN 998-2Packaging: bag KG 25Consumption: approx. 10-12 kg/m2 per cm of thickness
THERMO RINZAFFOThermal-insulating and dehumidifying scratch-coat mortar with expanded glassClassified GP according to EN 998-1Packaging: bag KG 25Consumption: approx. 3 kg/m2
THERMOFONDThermal-insulating and dehumidifying plaster with expanded glassClassified T according to EN 998-1Packaging: bag KG 25Consumption: approx. 7 kg/m2 per cm of thickness
THERMORASAThermal-insulating and dehumidifying mineral smoother with expanded glassClassified GP according to EN 998-1Packaging: bag KG 20Consumption: approx. 2,5-3 kg/m2
SAL-MURSalt efflorescence inhibitorPackaging: bucket L 0,75 - 2,5 – 16Consumption: approx. 0,3-0,5 L/m2 per coat
ASCIUGO RINZAFFO TDDehumidifying scratch-coat mortarClassified GP according to EN 998-1Packaging: bag KG 25Consumption: approx. 4 kg/m2
ASCIUGO TDDehumidifying plaster Classified RT according to EN 998-1Packaging: bag KG 15Consumption: 3 kg/m2 per cm of thickness
DRYWALL RINZAFFOThermal scratch-coat mortar Classified GP according to EN 998-1Packaging: bag KG 25Consumption: approx. 4 kg/m2
DRYWALLThermal plaster with polystyrene beadsClassified T according to EN 998-1Packaging: bag L 50Yield: 3,6 m2 /bag per cm of thickness
THERMOSTUCFinishing thermal fine plaster for smoothing and fillingFormulated with 3M GLASS BUBBLESPackaging: bucket L 4 – 14Yield: approx. 1 m2/L per mm of thickness
THERMICA INAnti-condensation, sanitizing and thermal water paint for interiorsFormulated with 3M GLASS BUBBLEPackaging: bucket L 2,5 - 4 -13Yield: approx. 3 m2/L in 2 coats
PRIMER I-REFLEXSiloxane primer for IR-reflective coatingsPackaging: bucket L 5 - 16Yield: approx. 4-5 m2/L
I-REFLEX PAINTIR-reflective acrylic-siloxane water paint, for exteriorsFormulated with 3M GLASS BUBBLESPackaging: bucket L 4 – 13Yield: approx. 2,5 m2/L in 2 coats
RASOFLEX A++Adhesive/Smoothing mortar for Thermal Insulation Composite Systems Classified GP according to EN 998-1Packaging: bag KG 25Consumption: as smoother approx. 3 kg/m2 – as adhesive approx. 4 kg/m2
FORMULATED WITH
3M GLASS BUBBLE