FIBREFLEXPACKING 8r MFG. CO.

· FIBREFLEXVegetable Fibre Sheet·THIO.FLEXThiokol Coated Fibreflex

· FIBRE.KORK @

Fibre-Cork Composition

INCORPORATED

P.O.BOX 4646, PHILADELPHIA,PA 19127

OFFICE and PLANT5101 Umbria Street

PHI LA., PA. 19128

TELEPHONES

(215) 482-1604(215) 482-1490-91

Fax: (215) 487-1220

GASKET SERVICE LISTING*MAXIMUM TEMPERATURE LIMITATION2500

FIBREFLEXmaterials are tough, pliable and compressible Protein Binder-treated fibre sheet packingused for flange gaskets in sealing fluidsor gases as listed below. Fibreflexmaterials are glycerine treated,whichpreventsflangeadhesionandcorrosion.

*Fibreflexmakesno expressor impliedrecommendationsfor useof its materials.This list is offeredonlyas a guideandwe stronglyrecommendtestingbe performedin yourapplicationpriorto approval.

AcetoneAlcoholAninal Fats & OilsBenzene (Benzol)Benzine (Gasoline)Bunker OilButaneButyl AcetateCarbon DioxideCarbon TetrachlorideChlorinated SolventsCresolDetergentsDibutyl PhthalateDOP (Dioctyl Phthalate)Dry Cleaning FluidEtherEthyl AcetateEthylene GlycolFormaldehyde

Fuel OilGas IlluminatingGasolineGylcerineGreasesHydrogenHydrogen SulphideInerteen 70-30InksKeroseneLacquers and ThinnersLinseed OilLubricating OilMethyl Choride (Refrigerant)Methyl Isobutyl Detone (MIBK)Naphtha, PetroleumNaphtha, Coal TarPaintsPetroleumPhenol

Prestone (Antifreeze)Propylene GlycolPyranol A13B3BSkydrol 500BSkydrol 7000BSoapSperry OilSuper VM&PNaphthaToluolTransformer OilTrichloroethyleneTricresyl PhosphateTriethylene Glycol (Neutral Grade)TurpentineVarnishVegetable OilWaterWood AlcoholXylol

The use of FIBREFLEX materials in sealing the following is UNSATISFACTORY and is NOT recommened:

Acids (Inorganic)AlkaliesAmmoniaHydrochloric Acid

Freon 12 & 22Nitric Acid (Dilute)Nitro BenzineOxygen

Silicate of SodaSuphuric Acid (Dilute)Steam

NOTE: In order to prevent possible dimensional instability, it is recommened that gaskets and other cutparts be protected from wide changes in humidity and temperature.

----

FIBREFLEXPACKING & MFG. CO.INCORPORATED

P.O. BOX 4646, PHILADELPHIA, PA 19127

· FIBREFLEX

Vegetable Fibre Sheet· THIO-FLEXThiokol Coated Fibreflex

· FIBRE-KORK@

Fibre-CorkComposition @

OFFICE and PLANT5101 Umbria StreetPMILA., PA. 19128

TELEPHONES

(215) 482-1604(215) 482-1490-91

Fax: (215) 487-1220Telex: 255429 FIBFXUR

GENERAL SPECIFICATIONSFIBREFLEX "DETROITER"

A. SCOPE:FIBREFLEX "DETROITER" is an excellentgrade of vegetablefibre sheet packing, efficientlysaturated witha glue-glycerine impregnant rendered insoluble by means of a tanning agent (formaldehyde) to give a strong, flexible,all-proof packing with properties retained during proper storage and in use.

B. CERTIFICATION: FIBREFLEX "DETROITER" is certified to meet the below listed specifications.HH-P-96G, Type I only (Federal Specification)MIL-G-12803A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ident. No. P3313BMIL-G-12803B & MIL-G-12803C . . . . . . . . . . . . . . . . . . .Ident. No. F326128M6ASTM 0 1170and SAE J90. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ident. No. P3313BASTM F 104and SAE J90 Ident. No. F326128-E21-M6Underwriters' Laboratory Listing No. MH 4649 (763N)

C. PHYSICAL CHARACTERISTICS:

Fibre 450/0to 55%Moisture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6% to 10%Chemical Solids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35% to 45%

D. CONDITIONING: All samples conditioned prior to testing as specified by applicable application - usually 50% RH- 70 to 85°F for a period of 22 or 24 hours.

E. STANDARDS: (Using American Society of Testing Materials Specification ASTM F 104prepared jointly with the Societyof Automotive Engineers and similar in requirements to MIL-G-12803C.

ORIGINAL Test Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000 p.s.i.PHYSICAL Compressibility. . . . . . . . . . . . . . . . . . . . . . . . . . . .25% to 40%PROPERTIES Tensile Strength. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2000p.s.i.

PHYSICAL Fuel B-Thickness increase .5% maximum-(Not Applicable to MIL-G-12803C)PROPERTIES #3 Oil - Thickness increase. . . . . . . .5% maximumAFTER Fuel B- Weightincrease. . . . . . . . . .15%maximum-(Not Applicableto MIL-G-12803C)IMPRESSION #3 Oil - Weight increase . . . . . . . . . . 15%maximum

Water - Weightincrease. . . . . . . . . . 100%maximum

F. THICKNESS TOLERANCES:

Thickness Plus or Minus.006",.010"and .015". . . . . . . . . . . . . . . .0035".021",.031",.046'~and .062" . . . . . . . . . .005".096" (3/32") . . . . . . . . . . . . . . . . . . . . . . .008".125"(118")and up .016"

G. FLEXIBILITY: FIBREFLEX "DETROITER" is capable of withstanding bending around a rod with a diameter oftwice the thickness of the material under test, without cracking, breaking or excessive marring of the surfaces.

H. TEMPERATURE LIMIT: .

Rev. 11/93

FIBREFLEXPACKING 8r MFG. CO.INCORPORATED

P.O. BOX 4646, PHILADELPHIA, PA 19127

· FIBREFLEX

Vegetable Fibre Sheet· THIO-FLEXThlokolCoated Fibreflex

· FIBRE-KORK@Fibre-Cork Composition

OFFICE and PLANT5101 Umbria StreetPHILA.,PA.19128

TELEPHONES(215) 482-1604(215) 482-1490-91

Fax: (215) 487-1220Telex: 255429 FIBFXUR

GENERAL SPECIFICATIONSFIBREFLEX@"GRADE A"

A.SCOPE: FIBREFLEX@ GRADE "A" is a premium grade of vegetable fibre sheet packing, efficiently saturated witha glue-glycerine impregnant rendered insoluble by means of a tanning agent (formaldehyde) to give a strong, flexible,all-proof packing with properties retained during proper storage and in use.

B. CERTIFICATION: FIBREFLEX@ GRADE "A" is certified to meet the below listed specifications.

HH-P-96G, Type I only (Federal Specification)MIL-G-12803A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ident. No. P3313BMIL-G-12803B & MIL-G-12803C Ident. No. F326128M6ASTM D 1\70 and SAE J90. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ident. No. P3313BASTM F 104 and SAE J90 Ident. No. F326128-E21-M6Underwriters' Laboratory Listing No. MH 4649 (763N)

C. PHYSICAL CHARACTERISTICS:

Fibre 45% to 55%Moisture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6°/., to 10%Chemical Solids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35% to 45%

D. CONDITIONING: AII samples conditioned prior to testing as specified by applicable application - usualIy 50%RH- 70 to 85°F for a period of 22 or 24 hours.

E. STANDARDS:(UsingAmerican Societyof TestingMaterials SpecificationASTM F 104preparedjointly with the Societyof Automotive Engineers and similar in requirements to MIL-G-12803C.

ORIGINAL Test Load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1000p.s.i.PHYSICAL Compressibility. . . . . . . . . . . . . . . . . . . . . . . . . . . .25% to 40%PROPERTIES Tensile Strength. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2000 p.s.i.

PHYSICAL Fuel B- Thickness increase. . . . . . . .5'Yomaximum-(Not Applicable to MIL-G-12803C)PROPERTIES #3 Oil - Thickness increase. . . . . . . . 5% maximumAFTER Fuel B- Weight increase .15% maximum-(Not Applicable to MIL-G-12803C)IMPRESSION #3 Oil - Weight increase . . . . . . . . . . 15%maximum

Water - Weight increase . . . . . . . . . . 100%maximum

F. THICKNESS TOLERANCES:

Thickness Plus or Minus.006",.010"and .015". . . . . . . . . . . . . . . .0035".021",.031",.046",and .062" . . . . . . . . . .005".096" (3/32") . . . . . . . . . . . . . . . . . . . . . . .008".125"(lI8") and up .016"

G. FLEXIBILITY: FIBREFLEX@ GRADE "A" is capable of withstanding bending around a rod with a diameter of twicethe thickness of the material under test, without cracking, breaking or excessive marring of the surfaces.

H. TEMPERATURE LIMIT: .

Rev. 12/94

FIBREFLEXPACKING Ie MFG. CO.INCORPORATED

P.O. BOX 4646, PHILADELPHIA, PA 19127

· FIBREFLEX

Vegetable Fibre Sheet· THIO.FLEX

Thlokol Coated Flbreflex· FIBRE.KORK@

Fibre-Cork Composition

OFFICE and PLANT5101 Umbria StreetPHILA.,PA.19128

TELEPHONES

(215) 482-1604(215) 482-1490-91

Fax: (215) 487-1220Telex: 255429 FIBFXUR

GENERAL SPECIFICATIONSFIBREFLEX "FIBRE-KORK"@

A.SCOPE: FIBRE-KORK is a composition cork and fibre glue-glycerineimpregnant gasket material manufactured andtested to the below-listed specifications. FIBRE-KORK consists of a special base fibre containing 40%granulated corkparticles by volume. FIBRE-KORK is saturated with a glue-glycerine-formaldehydeimpregnant which makes the sheetimpervious to oil, water and gasoline. The incorporation of the cork with the fibre makes FIBRE-KORK a soft com-pressible material adaptable for gasket application with low internal pressures.

B. CERTIFICATION: FIBRE-KORK is certified to meet the following specifications.MIL-G-12803A . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ident. No. P3415AMIL-G-12803B & MIL-G-12803C Ident. No. F328148M4ASTM 0 1170and SAE J90. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Ident. No. P3415AASTM F 104 and SAE J90 Ident. No. F328148-E41-M4

C. PHYSICAL CHARACTERISTICS:

Fibre (60% by volume) and Cork (40% by volume) .45% to 55%Moisture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6% to 100/.,Chemical Solids. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35% to 45%

D. CONDITIONING: All samples conditioned prior to testing as specified by applicable specifications - usually 50%RH -70 to 85°F for a period of 22 or 24 hours.

E. STANDARDS:(Using American Societyof TestingMaterials SpecificationASTM F 104preparedjointly with the Societyof Automotive Engineers and similar in requirements to MIL-G-12803C.

ORIGINAL Test Load 1000p.s.i. min.PHYSICAL Compressibility. . . . . . . . . . . . . . . . . . . . . . . . . . . .40% to 55%PROPERTIES Tensile Strength . . . . . . . . . . . . . . . . . . . . . . . . . 1000p.s.i. min.

PHYSICAL Fuel B- Thickness increase. . . . . . . .5% maximum-{Not Applicable to MIL-G-12803C)PROPERTIES #3 Oil - Thickness increase. . . . . . . .5% maximumAFTER Fuel B- Weight increase. . . . . . . . . .30% maximum-{Not Applicable to MIL-G-12803C)IMPRESSION #3 Oil - Weight increase . . . . . . . . . .30% maximum

Water - Weight increase ... . . . . . . . 100%maximum

F. THICKNESS TOLERANCES:

Thickness Plus or Minus.006",.010"and .015". . . . . . . . . . . . . . . .0035".021",.031",.046",and .062" . . . . . . . . . .005".096" (3/32") . . . .. . . .. . . . .. . . . .. . . . .008".125"(1/8")and up .016"

G. FLEXIBILITY: FIBREFLEX "FIBRE-KORK" is capable of withstanding bending around a rod with a diameter oftwice the thickness of the material under test, without cracking, breaking or excessive marring of the surfaces.

H. TEMPERATURE LIMIT: .

Rev. 11193

---