External Hosting Guidefor Windows Operation Systems

Table of contentsRequirements

How to Configure the Windows FirewallHow to Configure (Local Network) Hosting

Extra security rules

External Hosting GuideRequirements

External Hosting GuideRequirements

Firewall settings

Port 8090 is used for the interface (HTML Server, inbound and outbound traffic)

Port 8092 is used for controlling the interface (WebSocket, inbound and outbound traffic)

External Hosting GuideHow to Configure the Windows Firewall

External Hosting GuideHow to Configure the Windows Firewall

Open your “Control Panel”Select “System and Security”

Select “Windows Firewall”Click on the text “Advanced settings” on the Left.

External Hosting GuideHow to Configure the Windows Firewall

Click on “Inbound Rules” on the Left.Click on “New Rule...” on the Right.

External Hosting GuideHow to Configure the Windows Firewall

Select “Port” from the options.Click on the “Next >” button on the bottom.

External Hosting GuideHow to Configure the Windows Firewall

Ensure “TCP” is selected from the options.Select “Specific local ports” and enter “8090” inside it.

Click on the “Next >” button on the bottom.

External Hosting GuideHow to Configure the Windows Firewall

Ensure “Allow the connection” is selected from the options.Click on the “Next >” button on the bottom.

External Hosting GuideHow to Configure the Windows Firewall

Ensure all options are checked.Click on the “Next >” button on the bottom.

External Hosting GuideHow to Configure the Windows Firewall

I would advice to enter a name related to the port for easier overview.Click on the “Next >” button on the finish adding the rule.

External Hosting GuideHow to Configure the Windows Firewall

Perfect! 1 done, 3 more to go...

If you followed the steps then you have now setup port 8090 for inbound traffic.

Please repeat the same steps to setup port 8092.

Again please repeat setting up both ports but now inside the outbound traffic.

External Hosting GuideHow to Configure (Local Network) Hosting

External Hosting GuideHow to Configure (Local Network) Hosting

(Local Network) Hosting

Within this guide we will show you how to setup for local hosting.

When you are setting up your VPS then replace the local network adres by your external IP adres.

External Hosting GuideHow to Configure (Local Network) Hosting

Open your Start menuSelect Run

Enter “cmd” and Press OKEnter “ipconfig”

Write down your “IPv4 Address”, like here 192.168.1.10

External Hosting GuideHow to Configure (Local Network) Hosting

Start or open the Haasonline Trade ServerUse the left menu to go to “Settings”

Select “Hosting”Edit the “Host adres” and setup your network adresSave your setting and let the software reboot itself

External Hosting GuideHow to Configure (Local Network) Hosting

After the reboot the browser should reopen itself on the given hosting adres.

You now should be able to access this adres within your local network.

External Hosting GuideExtra security rules

External Hosting GuideExtra security rules (2FA Login)

Use the left menu to go to “Settings”Select “Security”

Click on the Barcode Icon to display your unique 2FA code Scan your 2FA code with your mobile device

Click on the option to enable 2FA and press Save

External Hosting GuideExtra security rules (Login Notifications)

Use the left menu to go to “Settings”Select “Notifications”

Make a new bot inside Telegram and copy your API tokenSave your token inside the textfield

Check or uncheck all notifications you like to see (at least the login!)

External Hosting Guide

We hope you enjoyed our presention how to setup for external hosting.

The Haasonline Software Team