Post on 03-Dec-2014
Enterprise Cabling
Solutions Guide
[Edition 1]
1
Contents Page
Contents Page
Introduction 2
Section 1 Madison technologies Solutions 3
Section 2 R&M Solutions 25
Section 3 Belden IBDN Solutions 51
Section 4 Racks & Cabinets 69
Section 5 Active Equipment 79
Section 6 Residential Cabling System 87
Section 7 Tools Test Equipment & Consumables 93
Section 8 Technical Reference 101
Glossary Of Terms 112
Index 114
2
Introduction
Madison Technologies is Australia’s premier supplier to the communications industry and your partner for specialist enterprise solutions.
Madison Technologies provides total product design, manufacturing and distribution services of Broadcast, Telecommunications and
Communications products and systems. We are an Australian owned company which was founded in 1991 and has expanded to include
Australia-wide and international operations.
Customer Service and Support
A major factor in the growth of Madison Technologies over the last decade has been the way we work closely with our partners to provide
added value to their business. As Madison Technologies continues to provide the highest level of customer support, we continue to develop
new technologies and solutions, and continue to adapt to the ever changing world of global high speed communications and systems. Our
experienced design team is trained to confer with our clients, consulting engineers, architects and other specialists to ensure the systems we
design, manufacture or recommend will always meet individual customer requirements. This ensures the right product, for the application and
task at hand, every time.
Beaming with Confidence
Our attention to detail and provision of quality products and systems provides the confidence that your network will perform for years to
come. Madison Technologies has continued to thrive and prosper by delivering innovation in product design, practices and training. We pride
ourselves in our attitude to service and strive to ensure that dealing with Madison Technologies results in pleasant purchasing experiences. The
staff at Madison Technologies are amongst the most respected in our industry for knowledge, customer service and attitude.
Enterprise, Industrial & Residential
Madison Technologies provides cable and connectivity systems for indoor and outdoor applications in Enterprise, Industrial, and Residential
environments. We provide connectivity components for aerial and underground fibre networks, through to multi-media systems for the
Industry, Enterprise, Campus and Data Centres. The solutions include a wide variety of standard and custom cables for different environments,
housings, connectors and termination systems.
More Choice
Madison Technologies gives you more choice. To ensure absolute flexibility and the highest levels of performance and reliability, we have
a global offer for Enterprise Cabling Systems. Extended warranty and site certification are available for each system.
The Madison Technologies System is tailored to the Australian environment and consists of a
complete system for residential, telephone, data, and optical fibre cabling. We make it happen with
the Madison Technologies Cabling System.
Get more with R&M FreeNet, the convincing cabling solution from Europe, which has outstanding performance,
Low Smoke Zero Halogen (LSZH) components for environmental responsibility, and the very highest levels of
quality and flexibility in design for the modern data centre, enterprise and industrial environment.
Belden is sending all the right signals with IBDN. Belden brings the best from USA with pair-managed
and modular solutions for copper and labour saving pre-polished and plug & play solutions for optical fibre.
More Active
A wide range of equipment is offered to connect, convert and adapt between fibre and copper, or alternative fibre types and transmission
protocols. Specialist fibre electronics are also available to utilize optical fibre for Audio and Video.
Connecting the IP world, Allied Telesis provides network electronics for today’s copper and optical fibre
networks. High speed connectivity equipment for data networks, internet and service providers for the
convergence of voice, data and video.
New Management
Madison Technologies provides new cable management solutions with a wide range of racks and cabinets for mounting network equipment
and cabling systems. Open rack frames offer a high density solution with true cable management, server and seismic cabinets offer more
design choices for data centre and network operators.
Throughout this catalogue you will see a diverse range of products and solutions, innovative designs and “real world” practical solutions
that Madison Technologies has provided for so many years. The catalogue has been carefully put together to provide a wealth of information
that’s readily accessible and recognisable. We hope that this catalogue will guide you quickly and easily to the product or solution that’s
right for you.
The service doesn’t stop there. Please check the Madison Technologies web site for detailed application notes, white papers, data sheets
and installation guides.
Finally, please don’t hesitate to contact us for assistance with network design, performance testing, standards information or anything you
may need for your Enterprise Cabling Solution.
3
Section 1
Madison Technologies
Solutions
Company Introduction - 4
Local Area Network Cables - 5
Patch Panels - 6
Cable Management - 6
Jacks - 7
Modular Plugs - 7
Patch Leads - 7
Internal Telephone Cables - 8
Modules & Accessories - 9
Distribution Enclosures - 10
Mounting Frames - 12
110 Wiring System - 13
Tools & Test Equipment - 15
Optical Fibre Cable - 16
Optical Fibre Connectors & Through Adaptors - 18
Splice Organiser Trays & Breakout Kits - 19
Wall Mount Optical Fibre Enclosures - 20
Optical Fibre Patch Cords & Pigtails - 21
System Warranty - 22
Quality Assurance - 23
4
company Introduction
Madison Technologies specialises in the supply of communications infrastructure products for the professional Broadcast / Audio Visual,
Building Services and Telecommunications industries.
Australian owned and founded in 1991, Madison Technologies’ vision was to introduce innovative products married with an unprecedented
level of service, which was previously denied due to the regulation of the telecommunications industry in Australia. Deregulation brought the
opportunity for Madison Technologies to develop a first rate distribution network and enhance our services to support changing client needs.
This resulted in the company adding significant value to our clients’ businesses as well as our own.
At Madison Technologies, we know that our clients are our lifeblood. We are committed to working with our customers to consistently provide
enterprise cabling solutions, supported by:
Complete solutionsInnovation & cost effectiveness tailored to client needs
Service driven supportProfessional, immediate and reliable customer support, every time
Design and manufactureFlexibility to create innovative products for client specific projects
Research, development & testingGuaranteed quality assurance and reliability
Highest quality brandsReliability combined with proven performance
Extensive distribution networkSingle source for supply for leading world brands
Highest stock levelsOff the shelf product available when clients need it
Proven track recordAustralia’s leading communications solution provider
Quality certifiedISO 9001:2000 - Quality management systems certification
Resources and trainingCertified Installer Plus
Technician Training (Fibre and Copper)
Custom Training (Standards, Design etc.)
Madison Technologies has a 20 Year Cabling System Warranty that is designed to allow you to mix and match the very best features and
benefits of Madison approved voice, data, and optical product solutions. Refer to the System Warranty in this section.
5
Local Area Network Cables
Local Area Network Cable is used for Horizontal Distribution and Backbone Cabling, 155 Mbps ATM, IEEE 802.3 Ethernet.
Approval
Category 6 Solid U/UTP Cable
FeaturesPlain annealed copper wire conductorCat 6 U/UTP solid cable100 ohm impedanceData transmission frequency 100 MHz
Part Number Description Sheath Colour Conductor (mm) 305m Reel in a Box Nominal O/D (mm)
UTPL6305RB 4 Pair Cat 6 Solid U/UTP PVC Cable Blue 1/0.57 7.0
UTPL6BLHF 4 Pair Cat 6 Solid U/UTP Halogen Free Blue 1/0.58 6.8
Category 5e Solid Cable
FeaturesPlain annealed copper wire conductorCat 5e U/UTP or F/UTP cable100 ohm impedanceData transmission frequency 100 MHz
Part Number Description Sheath Colour Conductor (mm) 305m Reel 305m Reel in a Box 500m Reel Nominal O/D (mm)
UTPL5EBL 4 Pair Solid U/UTP, PVC Blue 1/0.51 5.1
UTPL5EGN 4 Pair Solid U/UTP, PVC Green 1/0.51 5.1
UTPL5EGY 4 Pair Solid U/UTP, PVC Grey 1/0.51 5.1
UTPL5ERD 4 Paid Solid U/UTP, PVC Red 1/0.51 5.1
UTPL5EYE 4 Pair Solid U/UTP, PVC Yellow 1/0.51 5.1
FTP5EBL 4 Pair Solid F/UTP - Screened , PVC Blue 1/0.51 6.5
FTP5EGY 4 Pair Solid F/UTP - Screened , PVC Grey 1/0.51 6.5
UTPL5EPP 4 Pair Solid U/UTP Poly Sheath Harsh Environment Black 1/0.51 5.2
UTPL5EHF 4 Pair Solid U/UTP Halogen Free Black 1/0.51 5.2
UTPL5EJF 4 Pair Solid U/UTP Jelly Filled Underground Black 1/0.51 6.3
Category 5e Patch U/UTP Cable
FeaturesPlain annealed copper wire conductorCat 5e U/UTP patch cable100 ohm impedanceData transmission frequency 250 MHz
Part Number Description Sheath Colour Conductor (mm) 305m Reel Nominal O/D (mm)
UPTL5EMPTBK 4 Pair Cat 5e Stranded Patch U/UTP PVC Black 7/0.20 5.3
UPTL5EMTPBL 4 Pair Cat 5e Stranded Patch U/UTP PVC Blue 7/0.20 5.3
UPTL5EMTPGN 4 Pair Cat 5e Stranded Patch U/UTP PVC Green 7/0.20 5.3
UTPL5EMTPRD 4 Pair Cat 5e Stranded Patch U/UTP PVC Red 7/0.20 5.3
UTPL5EMTPVT 4 Pair Cat 5e Stranded Patch U/UTP PVC Violet 7/0.20 5.3
UTPL5EMTPYE 4 Pair Cat 5e Stranded Patch U/UTP PVC Yellow 7/0.20 5.3
UTPL5EMTPS 4 Pair Cat 5e Stranded Patch S/UTP PVC - Screened Black 7/0.20 5.3
••••
••••
••••
6
Patch Panels
Patch Panel
Madison Technologie’s range of RJ45 Patch Panels and Outlets is a comprehensive selection of products to cater for all installation requirements in an integratedstructured cabling environment. RJ45 Jacks are designed to easily snap in and out of standard wall plates and patch panels. Available in T568A and T568B configurations, the Madison Technologies Patch Panels and RJ45 Outlets are fully compliant with Category 5e and Category 6 Standards.
24 Port Patch Panel Cat 5e
Features1RU, charcoal grey universal wiring T568A or T568BSuits both Krone LSA and 110 punchdown toolsRear cable management frameACMA compliantUL certified
Part Number MT54524EM
Note: This product has been independently tested and complies with the electrical requirements of the listed specified standards.
24 Port Patch Panel Cat 6
Features1RU, black universal wiring T568A or T568BSuits both Krone LSA and 110 punchdown toolsRear cable management frameACMA compliantUL certified
Part Number MT64524M
Note: This product has been independently tested and complies with the electrical requirements of the listed specified standards.
24 Port Patch Panel Unloaded
Features1RU, BlackSpacing for 10 Gbps applicationRear cable management frame
Part Number MT64524E
50 Way High Density Voice Panel
Provides up to 50 RJ45 ports for patching within 1RU.
Part Number MT4550
Patch Panel Labelling Kit
For labelling Madison Technologies 24 Port Patch Panels.
Features4 x self adhesive holders4 x clear covers, snap-in4 x paper label tabs
Part Number MT8210
•••••
•••••
•••
•••
Cable management
Cable Management Bars
FeaturesFitted horizontally in either back or front of rack for cable management1RU or 2RU high to fit 19” racksBlack powder coated zincannealPlastic cable clips
Description Part Number
4 Ring, 1RU MT2401BK
5 Ring, 1RU MT2401-5BK
5 Ring, 2RU MT2405
Closed Cover Cable Management
FeaturesFitted horizontally in either back or front of rack for cable management1RU or 2RU high to fit 19” racksBlack powder coated zincanneal with slotted finger ducts fitted to base plate
Description Part Number
1RU MT2401-CV
2RU MT2405-CV
Velcro Ties
Features200mm or 300mm length, BlackSupplied in packs of 25
Length Part Number
200mm MT8100-200
300mm MT8100-300
Cable Management Rings
FeaturesUsed for vertical management of cables to rack frame1RU or 2RUBlack powder coated steel
Height (RU) Dimensions Part Number
1RU 58mmW x 79mmD MT2407
1RU 58mmW x 89mmD MT2417
1RU 86mmW x 78mmD MT2418
2RU 108mmW x 78mmD MT2406
2RU 80mmW x 78mmD MT2408
2RU 40mmW x 81mmD MT2409
•
•••
•
••
••
•
••
for patching within 1RU.
t Patch Panels.
frame
management frame
ac snneal ted
giant
MT64524M
7
Jacks
Cat 5e and Cat 6 Clip-in Jacks
RJ45 Cat 5e and Cat 6 Jack
FeaturesFitted with Krone type IDC connectorsACMA compliantUL certified10 in pack
ColourRJ45 Cat 5e Clip-in Jack RJ45 Cat 6 Clip-in Jack
Clipsal Jack 8P8C HPM Jack 8P8C Clipsal Jack 8P8C HPM Jack 8P8C
White MT54501C MT54501H MT64501C MT64501H
Black MT54501CBK MT54501HBK MT64501CBK MT64501HBK
Note: This product has been independently tested and complies with the electrical requirements of the listed specified standards. Madison Technologies holds a Quality System Certificate for this product.
RJ45 Cat 5e and Cat 6 Keystone Jack
FeaturesKeystone productUses 110 type tool or Krone type toolACMA compliantUL certifiedUK faceplates are available
Colour Cat 5e UTP Jack Cat 6 UTP Jack
White MT5801UA-WH MT6801UA-WH
Black MT5801UA-BK MT6801UA-BK
Note: This product has been independently tested and complies with the electrical requirements of the listed specified standards. Madison Technologies holds a Quality System Certificate for this product.
RJ45 Cat 6A FTP Keystone Jack
FeaturesKeystone productUses 110 type tool or Krone type toolACMA compliantUK faceplates are available
Colour Part Number
White MT6A801UA-WH
Black MT6A801UA-BK
Adaptor Clips
Keystone Adaptor Clips for Wall Plates
Colour Suits ClipsalWall Plates
Suits HPMWall Plates
White MTADCWH MTADHWH
Black MTADCBK MTADHBK
Red MTADCRD MTADHRD
Blue MTADCBL MTADHBL
Yellow MTADCYL MTADHYL
Workstation Bezel
Features30 series mounting clip10 in pack
Material Size White Black
1mm F30Z1WH F30Z1BK
1.5mm F30Z1.5 WH F30Z1.5BK
2mm F30Z2WH F30Z2BK
•
•••
•••••
••••
••
Modular Plugs
Modular Plugs
Suitable Cable Type Cat 5e Cat 5e Cat 5e Cat 6
4 Position 6 Position 8 Position 8 Position
Stranded, Round MTRJ11RSTR MTRJ12RSTR MTRJ45RSTR MTRJ456RSTR
Stranded, Round, Screened - - MTRJ45RSTRSC -
Stranded, Flat MTRJ11FSTR MTRJ12FSTR MTRJ45FSTR -
Solid, Round MTRJ11RSOL MTRJ12RSOL MTRJ45RSOL -
Solid, Flat - - MTRJ45FSOL -
Adaptors
RJ45 Y Adaptor
“Y” Adaptor, RJ45 (8P8C) Plug to Dual RJ45 sockets.Moulded one-piece construction for use with telephones.
Part Number MT8201
Patch Leads
Madison Technologies feature a range of high quality, high
performance RJ45 Patch Leads. Used for interconnection between
patch panels, outlets and equipment. Listed below is our standard
range, but if there is a special requirement contact Madison
Technologies.
RJ45 Patch Leads
Length (m) Cat 5e Cat 6
0.5 MTEL45450.5XX* MT6L45450.5XX*
1.0 MTEL45451.0XX* MT6L45451.0XX*
1.5 MTEL45451.5XX* MT6L45451.5XX*
2.0 MTEL45452.0XX* MT6L45452.0XX*
3.0 MTEL45453.0XX* MT6L45453.0XX*
5.0 MTEL45455.0XX* MT6L45455.0XX*
10.0 MTEL454510.0XX* MT6L45410.0XX*
*Note: Replace XX in part number with one of the following for cable colour: BL = Blue, WH = White, RD = Red, YL = Yellow, GN = Green, GY = Grey
tool
RJ45 sockets.se
8
Internal Telephone Cables
Internal Telephone Cable
Internal Telephone Cables are used for the connection of apparatus working on DC or Voice Frequency Signals.
FeaturesConductor: 1/0.50mm Plain Copper Wire Colour code: See table below
Approval
Part Number Description Number of Conductors Radial Thickness (mm) Nominal O/D (mm) 100m Reel 300m Easy Pull Box 500m Reel Cut to Size
ITC4 1 Quad 4 0.20 3.5
ITC6 3 Pair 6 0.20 4.8
ITC10 5 Pair 10 0.20 5.7
ITC12 6 Pair 12 0.20 6.1
ITC20 10 Pair 20 0.20 7.4
ITC40 20 Pair 40 0.20 9.2
ITC50 25 Pair 50 0.20 10.0
ITC100 50 Pair 100 0.20 13.5
ITC200 100 Pair 200 0.20 19.0
Core colour code
Element Number Wire 1 Wire 2 Element Number Wire 1 Wire 2 Element Number Wire 1 Wire 2
1 White Blue 11 White White/Orange 21-40 Yellow As Previous
2 White Orange 12 White Orange/Green 41-60 Black As Previous
3 White Green 13 White Orange/Brown 61-80 Violet As Previous
4 White Brown 14 White Orange/Grey 81-100 Red As Previous
5 White Grey 15 White White/Green Over 100 Repeat Colours
6 White White/Blue 16 White Green/Brown
7 White Blue/Orange 17 White Green/Grey
8 White Blue/Green 18 White White/Brown
9 White Blue/Brown 19 White Brown/Grey
10 White Blue/Grey 20 White White/Grey
ISDN Cable
Part Number Description Number of Conductors
Radial Thickness (mm) Nominal O/D (mm) 500m Reel Cut to Size
ISDN10 10 Pair 20 0.22 8.0
••
9
Modules & Accessories
Madison Technologies modules can be attached to backmount
systems offered by various manufacturers. Spacing of modules at
22.5mm allows maximum connection density on industry standard
backmount frames as well as on Madison Technologies new
ProClip backmount frames.
Madison Technologies modules provide excellent Crosstalk
performance, are ACMA approved, use industry standard
backmounts and the industry standard punchdown tool. A wide
range of accessories is available.
Modules
Disconnection Module, 10 Pairs
For ProClip backmount frames. Disconnection contact on the front for test access, measuring and isolation.
FeaturesPair numbering 1 – 0ACMA compliant10 per pack
ColourWire Diameter
RangePart Number
White 0.4mm – 0.9mm MT24840
Connection Module, 10 Pairs
For ProClip backmount frames. Connection contact on the front for branch off and/or plug in over voltage protection.
FeaturesPair numbering 1 – 0ACMA compliant10 per pack
Colour Wire Diameter Range Part Number
Grey 0.4mm – 0.9mm MT24841
TRC Earth Module
For termination of conductors to a common potential or Telecommunications Reference Conductor.
FeaturesACMA compliant10 per pack
Colour Wire Diameter Range Part Number
Red with Violet Wire 0.4mm – 0.9mm MT24842
NOTE: See Tools & Test Equipment for wiring tool for terminating all disconnection, connection and earth modules.
•••
•••
••
Modules (Cont.)
Disconnection Module, 10 Pairs
For 22.5mm backmount frames. Disconnection contact on the front for test access, measuring and isolation.
FeaturesPair numbering 1 – 0ACMA compliant10 per pack
ColourWire Diameter
RangePart Number
White 0.4mm – 0.9mm MT24040
Connection Module, 10 Pairs
For 22.5mm backmount frames. Connection contact on the front for branch off and/or plug in over voltage protection.
FeaturesPair numbering 1 – 0ACMA compliant10 per pack
Colour Wire Diameter Range Part Number
Grey 0.4mm – 0.9mm MT24041
TRC Earth Module
For termination of conductors to a common potential or Telecommunications Reference Conductor.
FeaturesACMA compliant10 per pack
Colour Wire Diameter Range Part Number
Red with Violet Wire 0.4mm – 0.9mm MT24042
NOTE: See Tools & Test Equipment for wiring tool for terminating all disconnection, connection and earth
Over Voltage Protection Magazine
Over Voltage Protection Magazine (Empty)
Can be equipped with gas filled surge protectors.
FeaturesAccommodates 10 piecesAccommodates 3 electrode arrestorsACMA compliant
Part Number MT24050
Over Voltage Protection Magazine (Loaded)
FeaturesEquipped with 10 pieces3 electrode arrestors230 VoltsACMA compliant
Part Number MT24051
Gas Arrestors (GDT)
FeaturesACMA compliant
Number of Volts Part Number
3 Electrode 230V MT24030-230
3 Electrode 350V MT24030-350
•••
•••
••
•••
••••
•
s
10
Test Leads
Number of Poles 2 x Banana Sockets
RJ45
2 Pole MT24080 MT24081
4 Pole MT24082 MT24083
Label Holders
Frame Label Holder
Attaches to industry standard backmount frames for individual labelling of distributor bays.
Features22.5mm mounting intervalIncludes white labelTakes one mounting position
Part Number MT24060
Hinged Label Holder
Attaches to Madison Technologies 10 pair modules. For individual labelling of modules.
FeaturesIncludes white labelClips over module
Part Number MT24061
Distribution Enclosures
Distribution Enclosures are used at or beyond the network boundary
as Main Distribution Frames (MDF’s), Intermediate Distributions
Frames (IDF’s) and/or Final Distribution Points (FDP’s).
Internal Plastic Distribution Enclosures
Intermediate Distribution Frames (IDF’s) and/or Final Distribution Points (FDP’s)
10 Pair IDF/FDP
10 Pair Intermediate Distribution Frame or Final Distribution Point. Box comes complete with 1 x 10 Pair IDC module. Cover snaps on and box has knockouts in the rear and in the cover to accommodate cables of varying diameters.
FeaturesACMA compliant
Dimensions (L x W x H) Part Number
180mm x 60mm x 50mm MT24000-010i
20 Pair IDF/FDP
20 Pair Intermediate Distribution Frame or Final Distribution Point. Box comes complete with 2 x 10 Pair IDC modules. Cover snaps on and box has knockouts in the rear and in the cover to accommodate cables of varying diameters.
Features
ACMA compliant
Dimensions (L x W x H) Part Number
160mm x 143mm x 53mm MT24000-020i
•••
••
•
•
Internal Plastic Distribution Enclosures (Cont.)
30 Pair IDF/FDP
30 Pair Intermediate Distribution Frame or Final Distribution Point. The cover is secured by quick release screws and has removable side and end panels. All panels have breakout sections for cable entry.
Features ACMA compliant
Dimensions (L x W x H) Part Number
170mm x 140mm x 82mm MT24000-030i
Note: Modules are not included.
Internal Main Distribution Frames (MDF’s)
10 Pair MDF
10 Pair Main Distribution Frame (MDF). Box comes complete with 2 x 10 Pair Disconnect modules. Cover screws on and box has knockouts in the rear and in the cover to accommodate cables of varying diameters.
Features ACMA compliant Raised lid to accompany GDI’S
Dimensions (L x W x H) Part Number
160mm x 143mm x 80mm MT24000-010M
50 Pair MDF
50 Pair Main Distribution Frame (MDF). Box comes complete with backmount frame and jumper guides. The cover is secured by quick release screws and has removable side and end panels. All panels have breakout sections for cable entry.
Features ACMA compliantRaised lid to accompany GDI’S
Dimensions (L x W x H) Part Number
210mm x 160mm x 90mm MT24000-050M
Note: Modules are not included.
100 Pair MDF
100 Pair Main Distribution Frame (MDF). Box comes complete with backmount frame and jumper guides. The cover is secured by quick release screws and has removable side and end panels. All panels have breakout sections for cable entry.
Features
ACMA compliantRaised lid to accompany GDI’S
Dimensions (L x W x H) Part Number
320mm x 210mm x 120mm MT24000-100M
Note: Modules are not included
•
••
••
••
art Number
T24000-010i
t N b
y g
.
pair modules. For individua
11
Internal and External Metal Enclosures
All enclosures are made from 1mm zincanneal and finished in oyster grey powder coat. Adjustable depth surrounds are supplied with all enclosures for Flush or Surface mounting. The 20mm surround is not included in the overall dimensions below. Enclosures are supplied with coin operated camlocks. Key locks are also available. All enclosures are ACMA compliant.
Internal Metal Enclosures
FeaturesReversible doorACMA compliant
Description Dimensions (HxWxD) Includes Part Number
20 Pair Internal FDP 200mm x 200mm x 55mm
2 Way backmount & earthing strip
MT27000-020
100 Pair Internal MDF 390mm x 290mm x 90mm
11 Way backmount & jumper guides
MT27000-100
250 Pair Internal MDF 800mm x 290mm x 100mm
27 Way backmount & jumper guides
MT27000-250
500 Pair Internal MDF 800mm x 450mmx 100mm
2 x 27 Way backmount & jumper guides
MT27000-500
External Metal Enclosures (IP54)
FeaturesACMA compliant
Description Dimensions (HxWxD) Includes Part Number
20 Pair External FDP 205mm x 305mm x 80mm
2 Way backmount & earthing strip
MT27000-020E
100 Pair External MDF 405mm x 305mm x 90mm
11 Way backmount & jumper guides
MT27000-100E
250 Pair External MDF 800mm x 305mm x 100mm
27 Way backmount & jumper guides
MT27000-250E
500 Pair External MDF 800mm x 465mm x 100mm
2 x 27 backmount & jumper guides
MT27000-500E
••
•
Record Books & Cards
A comprehensive range of record books and cards is available for all cable management record requirements.
Record Books and Cards
Description Part Number
20 Pair Record Book MT27991
60 Pair Record Book MT27992
100 Pair Record Card MT27993
1200 Pair Record Book MT27990
Record Book Holder
Used for storing 1200 pair record book
Dimensions (HxWxD) Colour Part Number
224mm x 200mm x 10mm Grey MT27995
Weatherproof MDF’s and IDF’s
The Madison Technologies range of Weatherproof MDF’s is designed for use at the Network Boundary on residential and business premises with up to 50 incoming Carrier service lines. Available in 30 and 50.
Weatherproof MDF’s
Model 30 Weatherproof MDF
The Carrier side of the Model 30 has three backmount positions free for Disconnect modules (supplied and fitted by the Carrier). The Customer (Distribution) side is fitted with 3 x 10 Pair Madison Technologies Disconnect Modules (MT24040). The enclosure has a unique split cover which allows separate access to the distribution side of the enclosure while maintaining carrier security.
FeaturesACMA compliantIPX4 ratedTelstra Ser/Item: 537/114Modules included
Description Dimensions (HxWxD) Part Number
30 Pair 300mm x 260mm x 110mm MT370030M
Model 50 Weatherproof MDF
The Model 50 Weatherproof MDF comes complete with an 11 Way backmount frame and jumper guides.
FeaturesACMA compliantIPX4 rated
Description Dimensions (HxWxD) Part Number
50 Pair 350mm x 225mm x 90mm MT370050M
Note: Modules are not included
••••
••
s
12
Weatherproof MDF’s and IDF’s (Cont.)
Weatherproof IDF’s
The Madison Technologies range of plastic Weatherproof IDF’s covers 20, 30 and 40 Pair.
20-40 Pair Intermediate Distribution Frame (Final Distribution Point)
FeaturesEnclosure comes complete with modulesACMA compliant IPX4 rated
Number of Pairs
Dimensions (HxWxL)
Part Number
20 Pair 245mm x 188mm x 75mm
MT370020i
30 Pair 245mm x 188mm x 75mm
MT370030i
40 Pair 245mm x 188mm x 75mm
MT370040i
Tube Spanner
Suits distribution MDF 30 Pair Box.
Dimensions Part Number
3/8” x 7/16” MTTUBE
•
••
Mounting Frames
Wall Mount Jumperable Frames
Madison Technologies jumperable frames and covers cater for both MDF and IDF applications. All of the frames are ACMA compliant and all are based on industry standard backmount frames.
Frames are constructed from 1mm passivated Zincanneal steel and covers are two-tone plastic, metal and lockable.
FeaturesACMA compliant
MT28101-110 MT27101-110 MT28101-270 MT27101-270
Description Dimensions (H x W x D) Part Number
11 Way 375mm x 190mm x 75mm MT28101-110
11 Way 375mm x 190mm x 75mm MT27101-110
27 Way 760mmx190mmx75mm MT28101-270
27 Way 760mmx190mmx75mm MT27101-270
Jumperable Frame Covers
Suitable for ProClip and standard backmount frames.
FeaturesOyster grey colourACMA compliant
MT27901-110 MT27901-270
Description Dimensions (H x W x D) Part Number
11 Way 403mm x 200mm x 120mm MT28901-110
11 Way 403mm x 200mm x 120mm MT27901-110
27 Way 785mm x 200mm x 120mm MT28901-270
27 Way 785mm x 200mm x 120mm MT27901-270
Mount Brackets
Straddle Mount Brackets
Straddle mount brackets are used for positioning jumperable frames over cable tray.
Description Part Number
2 Way MT27702
3 Way MT27703
4 Way MT27704
•
••
tray.
13
Wall Mount Vertical
66 Way Wall Mount Vertical
FeaturesACMA compliant
MT27060
Description Dimensions (H x W x D) Part Number
66 Way 1525mm x 230mm x 200mm MT28060
66 Way 1525mm x 230mm x 200mm MT27060
Jumper Ring Kit for 66 Way Vertical
Used for right-hand side of frame.
Part Number MT27061
Backmount Frames
FeaturesACMA compliant
Description Part Number
2 Way MT27002-02
3 Way MT27002-03
6 Way MT27002-06
11 Way MT27002-11
27 Way MT27002-27
55 Way MT27002-55
19” Backmount Frame, 9 Way Recessed 2RU
FeaturesAccommodates 9 x 10 pair disconnect modules (90 pairs)
Dimensions (L x H x D) Part Number
483mm x 87mm x 74mm MT192509
19” Backmount Frame, 15 Way Recessed 3RU
Features Accommodates 15 x 10 pair disconnect modules (150 Pairs) Jumper rings included
Dimensions (L x H x D) Part Number
483mm x 132mm x 74mm MT192515
•
•
•
••
110 Wiring System
Wiring Blocks
Used with 4 and 5 pair 110 connecting blocks for field termination.
FeaturesLegs allow for back cable routingCan be rack mountedColour coded tips are pointed to guide wire placement for easy terminationFire retardant moulded plastic
Cat 5e Pairs Cat 5e Part Number Cat 6 Pairs Cat 6 Part Number Legs Included
100 Pair MT110100WBL 96 Pair MT11096WBL Yes
100 Pair MT110100WBA 98 Pair MT11096WBA No
300 Pair MT110300WBL 288 Pair MT110288WBL Yes
300 Pair MT110300WBA 288 Pair MT110288WBA No
110 Jumper Trough
Jumper trough is placed between
110 wiring blocks and horizontally
routes patch cords and cross
connect wires.
Dimensions (WxHxD) Legs Included Part Number
273mm x 68.3mm x 119.1mm Yes MT110JTA
216mm x 68.3mm x 68.3mm No MT110JTL
110 Cross Connect Rack Mount Panel
Rack mount panel complete with wiring blocks (without legs) and 2 jumper troughs (without legs) rack mounted.
Number of Pairs Category Part Number
200 Cat 5e MT110200RM
192 Cat 6 MT110192RM
•••
•
iant
MT27060
s included
14
Wiring Blocks (Cont.)
110 Cross Connect System Terminal Blocks(Wall Mount Kit Complete)
Designed for wall mount applications. Wiring blocks and troughs are mounted on a metal backboard equipped with cable troughs at the bottom.
FeaturesWiring blocks4 and 5 pair connecting blocks Horizontal jumper troughs for patch cord management
Number of Pairs Part Number
300 MT110300
900 MT110900
110 Vertical Cable Management Trough
Vertical cable management troughs are positioned between the 110 Wiring blocks to provide a path for patch cords or cross-connect wires. Provides separation for different wiring media.
Number of Pairs Dimensions (W x H x D) Single Channel Dual Channel
300 216mm x 606mm x 194mm MT110300CTS MT110300CTD
900 216mm x 1569mm x 194mm MT110900CTS MT110900CTD
110 “C” Blocks
110 “C” connecting blocks are used on 110 wiring blocks. The 4 and 5 Pair sizes have colour coded tips for installation identification.
Number of Pairs
Cat 5e Cat 6
4 MT110C4 MT110C64
5 MT110C5 -
110 Plugs
Number of Pairs
Cat 5e Cat 6
1 MT110PCC1 -
2 MT110PCC2 -
4 MT110PCC5-4 MT110PCC6-4
•••
110 Wiring Blocks - Patch Leads
110 Plug to RJ45 Plug
Provides interconnection to networking equipment or can be used for patching in a cross connect field for voice and data applications.
110 Plug to 110 Plug
Provides interconnection to networking equipment or can be used for patching in a cross connect field for voice and data applications.
Part Number Matrix
15
Tools & Test Equipment
Sensor Type - Insertion Tool
Professional wiring tool for terminating all disconnection, connection and earth modules. Performs termination and cutting of wire in one action. Cutting function can be disengaged for looping or bus applications.
Part Number Conductor Diameter Insulation Diameter
6417-2-055-01 0.4mm – 0.9mm 0.7mm – 1.9mm
ter
m
16
Optical Fibre Cable
Optimal is a well-established Australian operation that has run continuously since its opening in 1986. Originally established to service the
emerging optical fibre telecommunications industry.
The purpose-built optical fibre cable manufacturing plant has developed a strong reputation for offering an extensive range of high quality
cables and providing manufacturing flexibility. Products in the range include loose tube or tight buffered constructions for indoor or outdoor
applications, non-metalic or metalic armouring, as well as cables for direct burial, duct or specialist aerial designs for short or long span.
Custom made cables can also be manufactured according to specific customer requirements in both multimode (OM1 OM2, OM3 etc)
and single mode ( G652.d, G655, etc) constructions. In conjunction with a major international fibre manufacturer (OFS) Optimal produces
superior product.
Simplex & Duplex Cord
Optimal Cord cables are used for patch leads and interconnects. They feature a high resistance to bending loss and provide excellent characteristics. They are available in single cord (Simplex) or figure 8 type construction (Duplex) which is designed to peel apart for ease of termination.
ConstructionSimplex and Duplex cords are constructed from 900 micron tight buffered fibres, individually strengthened and protected by aramid yarn contained within a PVC or LSZH sheath of a nominal 2.8mm OD.
Single Mode
Description Simplex Duplex
Single Mode, G652.d (ZWP), Yellow OCYP1CAA001YW OEYP1CAA002YW
Multimode
Description Simplex Duplex
Multimode, 62.5um (OM1), Grey OCYP62AA001GY OEYP62AA002GY
Multimode, 50um (OM2), Orange OCYP50AA001OE OEYP50AA002OE
Multimode, 50um (OM3), Aqua OCAP53AA001AQ OEYP53AA002AQ
Note: Different colour sheaths are available to those indicated as a standard for the particular fibre type. 1.6mm or 2.0mm sheath OD is available (Subject to MOQ). Low Smoke Zero Halogen sheath is also available upon request (Subject to MOQ).
Internal/External Riser
Optimal Internal/External Risers (also called Distribution cables) are designed for internal or protected outdoor use (when installed in ducts or conduits), primarily in structured (premise) wiring systems in backbones and or inter-building.
ConstructionInternal Riser cables use 0.9mm tight buffered fibres, surrounded by aramid and water blocking yarn reinforcement with an external PVC or Low Smoke, Zero Halogen (LSZH) sheath.
Description PVC Sheath LSZH Sheath
Single Mode, G652.d (ZWP) OWAP1CAA0** OWBP1CAA0**
Multimode, 62.5um (OM1) OWAP62AA0** OWBP62AA0**
Multimode, 50um (OM3) OWAP53AA0** OWBP53AA0**
Note: ** Denotes core count - Standard core counts include 4, 6, 8, 12, 24 ,36 and 48 core. Higher core counts available on application.
1.2.3.
Internal Heavy Duty Distribution
Optimal Heavy Duty Distribution Cables (also called Breakout cables) are constructed from multiple 3mm simplex cords, bundled into a tough sheath. These cords are ready for direct connector attachment without the need for breakout kits or additional preparation. They have excellent physical and mechanical properties with improved crush and impact performance making them especially suitable for rugged deployment applications such as Industrial, Mining and Petroleum Industry applications, etc. They are available in various sheath constructions for either indoor or outdoor applications.
ConstructionSimplex cords constructed from 900 micron buffered fibres, individually strengthened and protected by aramid yarn contained within an individual PVC or LSZH sheath. The individual cords are cabled around a central strength member and various sheathing options are offered based on their required application.
Description PVC Sheath Outdoor Polyethylene Sheath
Single Mode, G652.d (ZWP) OCAP1CAA0**OE OCCP1CAA0**BK
Multimode, 62.5um (OM1) OCAP62AA0**OE OCCPP62AA0**BK
Note: ** Denotes core count - Standard core counts include 4, 6, 8, 12, 24 and 36 cores.
External Mono or Uni Tube
Optimal External Mono or Uni Tube cables are available up to 24 cores contained within a single central gel filled loose tube, strengthened with flexible non-metallic strength elements contained by the inner polyethylene sheath. Designed for long haul applications and suitable for direct burial or installation in conduits, ducts or trays.
ConstructionStandard outer sheath options consist of a polyethylene sheath, or with an additional nylon sheath for termite resistance. A sacrificial sheath can be added to protect the nylon sheath during installation to maintain maximum insect resistance. Note: Maximum single length is 10km.
Description PVC Sheath Polyethylene & Nylon
Single Mode, G652.d (ZWP) OQCU1CEA0** OQDU1CEA0**
Multimode, 62.5um (OM1) OQCU62EA0** OQDU62EA0**
Multimode, 50um (OM3) OQCU53EA0** OQDU53EA0**
Note: ** Denotes core count - available in 4, 6, 8, 12, and 24 core.
17
External Loose Tube
Optimal external optical fibre, stranded loose tube cables are a non-metallic cable designed for long haul external applications. They can be directly buried, installed in conduits and ducts or deployed on trays. Optical fibres are contained in jelly filled loose tubes laid up around a FRP central strength member and are ‘dry’ water blocked.
ConstructionStandard outer sheath offering consists of a polyethylene inner sheath with a nylon outer sheath, providing insect and termite protection. A sacrificial sheath can also be added to protect the nylon during the installation process, ensuring maximum insect and termite protection is maintained.
OptionsA number of options are available for external loose tube cables. These include:
Composite mix of single and multimode fibresEither a corrugated steel tape armour or non-metallic rodent resistant armourLow smoke zero halogen outer sheathAlternative types of Single Mode fibre (eg. G655 (NZDF))Alternative types of Multimode fibre (eg. OFS LaserWave 550, extended distance 10Gb/s)
2-72 Fibres (6 fibres per tube)
Description Polyethylene & Nylon Polyethylene, Nylon & Sacrif
Single Mode, G652.d (ZWP) OKDU1CPA0**BE OKHU1CPA0**BK
Multimode, 62.5μm (OM1) OKDU62PA0**BE OKHU62PA0**BK
Note: ** Denotes core count - available in 6, 12, 24 & 36 core.
12-72 Fibres (12 fibres per tube)
Description Polyethylene & Nylon Polyethylene, Nylon & Sacrif
Single Mode, G652.d (ZWP) OMDU1CPA0**BE OMHU1CPA0**BK
Note: ** Denotes core count - available in 12, 24, 36, 48, 60 & 72 core. Larger core counts available upon request.
Armoured Mono or Uni Tube
Optimal Corrugated Steel Tape Armoured (CSTA) Mono or Uni Tube cable is designed to provide superior strength and robustness in demanding applications like Industrial plant, Mining or those areas where the cable may be exposed to physical damage. CSTA also supplies superior rodent resistance. It can be directly buried, installed in conduits, ducts or deployed on trays.
ConstructionOptical fibres are contained in an axial, jelly filled loose tube and strengthened with flexible non-metallic armour contained by a polyethylene sheath. Over this is applied a corrugated steel tape armour with a bonded polyethylene outer sheath (OQPU) or an additional nylon inner sheath can also be added under the armouring to increase the insect, termite and rodent protection (OQTU).
Description Polyethylene Sheath Polyethylene & Nylon
Single Mode, G652.d (ZWP) OQPU1CEA0**BK OQTU1CEA0**BK
Multimode, 62.5μm (OM1) OQPU62EA0**BK OQTU62EA0**BK
Multimode, 50μm (OM3) OQPU53EA0**BK OQTU53EA0**BK
Note: ** Denotes core count. Single Mode is available in 6, 12, & 24 core. Multimode is available in 4, 6, 12 & 24 core. Larger core counts available upon request.
••
•••
Armoured Loose Tube
Optimal Corrugated Steel Tape Armoured (CSTA) Loose Tube cable is designed to provide superior strength and robustness in demanding applications like Industrial plant, Mining or those areas where the cable may be exposed to physical damage. CSTA also supplies superior rodent resistance. It can be directly buried, installed in conduits, ducts or deployed on trays.
ConstructionOptical fibres are contained in jelly filled loose tube and stranded around a central strength member, the core is dry blocked and a polyethylene sheath is applied over the tubes. In the O*PU constructions the CSTA is then applied and a further polyethylene sheath is applied over the armour. The O*TU versions have an additional nylon sheath applied over the first (inner) polyethylene sheath to provide additional insect and termite protection.
Description Polyethylene Sheath Polyethylene & Nylon
Single Mode, G652.d (ZWP) OKPU1CPA0**BK OKTU1CEA0**BK
Multimode, 62.5μm (OM1) OKPU62PA0**BK OKTU62EA0**BK
Note: ** Denotes core count. Single Mode is available in 6, 12, 18, 24 & 36 core. Multimode is available in 12, 24, & 36 core. Larger core counts available upon request.
Non-metallic Rodent Resistant
Optimal Non Metalic Rodent Resistant Cable is designed to provide an all dielectric cable that provides improved resistance to rodent attack. It can be directly buried, installed in conduits, ducts or deployed on trays. The glass composite armour also significantly increases the tensile strength and general robustness of the cable.
ConstructionOptical fibres are contained in an axial jelly filled loose tube strengthened with flexible non-metallic strength elements bonded to the inner polyethylene sheath. An insect resistant nylon jacket goes over this polyethylene sheath. The glass composite armour is then applied and a further polyethylene sheath is then applied over the armour.
Description Mono Tube Loose Tube
Single Mode, G652.d (ZWP) OQ7U1CEA0**BK OK7U1CPA0**BK
Single Mode, G652.d (ZWP) - OM7U1CPA0**BK
Note: ** Denotes core count. Mono Tube is available in 6, 8, 12 & 24 core. OK7U Loose Tube is available in 12, 24 & 36 core. OM7U Loose Tube is available in 48, 60, 72 & 96 core.
18
Optical Fibre Connectors
& Through Adaptors
Epoxy Connectors
Madison Technologies offers an off the shelf range of optical fibre connectors.
ST Epoxy Connectors
Part Number Description
MTSTMM ST Connector, Epoxy, Multimode
MTSTSM ST Connector, Epoxy, Single Mode
SC Epoxy Connectors
Part Number Description
MTSCMM SC Connector, Epoxy, Multimode
MTSCSM SC Connector, Epoxy, Single Mode
MTSCAPC SC Connector, Epoxy, Angled Polished, Single Mode
MTSCMM MTSCSM MTSCAPC
FC Epoxy Connector
Part Number Description
MTFCSM FC Connector, Epoxy, Single Mode
LC Epoxy Connectors
Part Number Description
MTSLCMM LC Simplex Connector, Epoxy, Multimode, 2.0mm jacket, 127 μm
MTSLCSM LC Simplex Connector, Epoxy, Single Mode, 3.0mm jacket, 126μm
MTDLCMM LC Duplex Connector, Epoxy, Multimode, 2.0mm jacket, 127μm
MTDLCSM LC Duplex Connector, Epoxy, Single Mode, 3.0mm jacket, 126μm
MTSLCMM MTSLCSM
MTDLCMM MTDLCSM
MTRJ Plug
Part Number Description
MTMTRJ MTRJ Plug
Through Adaptors
Madison Technologies offers an off the shelf range of optical fibre Through Adaptors.
ST Through Adaptor
Part Number Description
MTSTADTMM
MTSTADTMM ST Through Adaptor, Multimode
MTSTADTSM ST Through Adaptor, Single Mode
MTSTSCADTMM ST/SC Adaptor, Multimode
MTSTSCADTSM ST/SC Adaptor, Single Mode
SC Through Adaptors
Part Number Description
MTSSCADTMM SC Through Adaptor, Simplex, Multimode
MTSSCADTSM SC Through Adaptor, Simplex, Single Mode
MTSSCAPCADTSM SC Through Adaptor, Simplex, Single Mode, Angled Polished
MTDSCADTMM SC Through Adaptor, Duplex, Multimode
MTDSCADTSM SC Through Adaptor, Duplex, Single Mode
MTDSCAPCADTSM SC Through Adaptor, Duplex, Single Mode, Angled Polished
MTSSCADTMM MTSSCADTSM MTSSCAPCADTSM
MTDSCADTMM MTDSCADTSM MTDSCAPCADTSM
FC Through Adaptor
Part Number Description
MTFCADTSM FC Through Adaptor, Single Mode
LC Through Adaptors
Part Number Description
MTSLCADTMM LC Simplex Through Adaptor, Phosphor Bronze sleeve, Multimode
MTSLCADTSM LC Simplex Through Adaptor, Ceramic sleeve, Single Mode
MTDLCADTSCMM LC Duplex Through Adaptor, Phosphor Bronze sleeve, SC-footprint, Multimode
MTDLCADTSCSM LC Duplex Through Adaptor, Ceramic sleeve, SC-footprint, Single Mode
MTQLCADTMM LC Quad Through Adaptor, Phosphor Bronze sleeve, DSC-footprint, Multimode
MTQLCADTSM LC Quad Through Adaptor, Ceramic sleeve, DSC-footprint, Single Mode
MTSLCADTMM MTDLCADTSCMM MTQLCADTMM
MTSLCADTSM MTDLCADTSCSM MTQLCADTSM
19
FO Dummy Plug
Part Number Description Quantity Dimensions
R30004-20 E-2000™/SSC/DLC 12 13 x 9 mm (W x H)
R30841 ST/FC 12 8.0 to 9.5 mm
R30842 E-2000™ Compact/SC-RJ 12 18.5 x 16.0 mm (W x T)
R30843 SC Duplex 12 26.4 x 9.8 mm (W x T)
Splice Organiser Trays
& Breakout Kits
Optic Fibre Splice Trays
Splice trays are available in capacities of 12 (R30) or 24 (R40) optical fibres per tray. The trays are supplied as a basic set or additional tray set to build the stack. Add splice combs to hold heat shrink fusion splice sleeves.
Part Number Description
R30393 R30 Splice Tray 12 Fibre Basic Set
R30394 R30 Splice Tray 12 Fibre Additional Set
R308445 R40 Splice Tray 24 Fibre Basic Set
R308444 R40 Splice Tray 24 Fibre Additional Set
R30393 R308445
R30394 R308444
Splice Protectors
Heat Shrink Splice Protector. Polyolefin outer sleeve. Ethylene vinyl acetate inner sleeve provides moisture resistant barrier after shrinkage. Strength member is stainless steel. Min shrink temperature is 90°C. Working temperature -55°C to 100°C.
Part Number Description Dimensions
MTHSFSPF45 45mm Heat Shrink Splice Protector 45mmL x 3mmD x 0.2mmT
MTHSFSPF60 60mm Heat Shrink Splice Protector 60mmL x 3mmD x 0.2mmT
Splice Combs
Part Number Description
MT30045 Splice Comb R30 (6 fibre)
R30039-06 Splice Comb R30/R40 (6 fibre)
R308448 Splice Comb R40 (12 fibre)
R30042 Splice Comb Mechanical (6 fibre)
Fan-out Kits
Madison Technologies Fan-out Kits can be used in optical fibre enclosures and housings to assist with the mechanical protection of field terminated fibres. The Fan-out kit can be used with 250um coated fibres to build up to 900um diameter for connector termination.
FeaturesAvailable for 4-24 fibres900um tubing, 1 metre length
Part Number Description
SPKL-04 Fan-out Kit for 4 Fibres
SPKL-06 Fan-out Kit for 6 Fibres
SPKL-08 Fan-out Kit for 8 Fibres
SPKL-12 Fan-out Kit for 12 Fibres
SPKL-24 Fan-out Kit for 24 Fibres
Breakout Kits
Madison Technologies Breakout Kits can be used to provide mechanical protection for the terminated ends of optical fibre cables. The Breakout Kit can be used with 250μm and 900μm coated fibres to build up to 3mm diameter for connector termination.
Features Available for 6 and 12 fibres3mm tubing, 1 metre length
Part Number Description
BRKT-06 Breakout Kit for 6 Fibres
BRKT-12 Breakout Kit for 12 Fibres
••
••
20
Wall Mount Optical Fibre Enclosures
Wall Mount Enclosures
Lockable wall mount enclosure for splicing and/or direct termination. Includes splice trays and combs for heat shrink fusion splice holders. Add appropriate Through Adaptors and pigtails.
MAX Port Dimensions (mm) H x W x D
ST/FC DSC SSC/DLC
12 Port 303 x 326 x 85 MT30612ST MT30612DSC MT30612SSC
48 Port 370 x 485 x 106 MT30648ST MT30648DSC MT30648SSC
MT30648
Rack Mount Enclosures
19” Fixed Rack Mount Enclosures
Cost effective enclosures let you add Through Adaptors, splice trays and pigtails to suit your installation.
MT30916 MT30924
ST/FCPart Number
DSCPart Number
SSC/DLC Part Number
Description Dimensions (mm) W x D x H
Cage Nuts & Screws
Cable GlandsM20
Cable Glands M16
Strain Relief Cable Guide Spools Splice Cassette Kit
MT30915 MT30916 MT30917 1RU 24 Port, With Lid 483 x 260 x 44 4 2 - 2 6 - Optional
MT30924ST MT30924DSC - 1RU 24 Port , Without Lid 483 x 260 x 44 4 - Optional Optional 5 - Optional
19” Hinged Rack Mount Enclosures
MT30901 MT30902
ST/FCPart Number
DSCPart Number
SSC/DLCPart Number
Description Dimensions (mm) W x D x H
Cage Nuts & Screws
Cable GlandsM20
Cable Glands M16
Strain Relief Cable Guide Spools Splice Cassette Kit
MT30901ST MT30901DSC MT30901SSC 1RU 24 Port 483 x 270 x 44 4 Optional Optional 1 6 Optional Optional
MT30902ST MT30902DSC MT30902SSC 2RU 48 Port 483 x 270 x 88 4 - - 2 5 2 4
Fibre Tray Gland Kits
Part Number Description
MT30901GK16MM M16 Cable Gland (Bore 5-10mm)
MT30901GK20MM M20 Cable Gland (Bore 10-14mm)
MT30648
21
Optical Fibre Patch Cords
& Pigtails
Optic Fibre Pigtails
The optical fibre pigtails include ST, SC and LC Multimode 900μm coated buffer fibres in individual 2.0 metre long pigtails for OM1 and OM3. Rainbow coloured 12 packs are also available on request, as are OM2 and G655 pigtails. All other connector types and configurations can be manufactured upon request. Contact Madison Technologies to discuss your specific optic fibre pigtail requirements.
OS1 Single Mode Pigtails
Part Number Description Length Colour Qty
MTPTSCSM2.0 Pigtail, SC, OS1 900um 2.0m Yellow 1
MTPTSCSM2.0-12PK Pigtail, SC, OS1 900um, set 12 2.0m EIA/TIA 12
MTPTSCAPCSM2.0 Pigtail, SCAPC, OS1 900um 2.0m Yellow 1
MTPTSCAPCSM2.0-12PK Pigtail, SCAPC, OS1 900um, set 12 2.0m EIA/TIA 12
MTPTLCSM2.0 Pigtail, LC, OS1 900um 2.0m Yellow 1
MTPTLCSM2.0-12PK Pigtail, LC, OS1 900um, set 12 2.0m EIA/TIA 12
OM1 62.5um Multimode Pigtails
Part Number Description Length Colour Qty
MTPTSTMM2.0 Pigtail, ST, OM1 900um 2.0m Orange 1
MTPTSTMM2.0-12PK Pigtail, ST, OM1 900um, set 12 2.0m EIA/TIA 12
MTPTSCMM2.0 Pigtail, SC, OM1 900um 2.0m Orange 1
MTPTSCMM2.0-12PK Pigtail, SC, OM1 900um, set 12 2.0m EIA/TIA 12
MTPTLCMM2.0 Pigtail, LC, OM1 900um 2.0m Orange 1
MTPTLCMM2.0-12PK Pigtail, LC, OM1 900um, set 12 2.0m EIA/TIA 12
OM3 50um Multimode Pigtails
Part Number Description Length Colour Qty
MTPTSCOM32.0 Pigtail, SC, OM3 900um 2.0m Aqua 1
MTPTSCOM32.0-12PK Pigtail, SC, OM3 900um, set 12 2.0m EIA/TIA 12
MTPTLCOM32.0 Pigtail, LC, OM3 900um 2.0m Aqua 1
MTPTLCOM32.0-12PK Pigtail, LC, OM3 900um, set 12 2.0m EIA/TIA 12
MTPTMTRJOM32.0 Pigtail, MTRJ, OM3 900um 2.0m Aqua 1
MTPTMTRJOM32.0-12PK Pigtail, MTRJ, OM3 900um, set 12 2.0m EIA/TIA 12
Note: Other lengths are available
Patch Cords
Madison Technologies offers an off the shelf range of optical fibre Patch Cords to suit most common applications. Other connector types, together with specific glass types such as OM2 and G655, may be available upon request. Please contact Madison Technologies for your specific Patch Cord requirements.
OS1 Single Mode Patch Cords
Part Number Description Lengths Available
MTPCSLCSLCSM** Simplex, LC-LC, OS1 1 2 5 10
MTPCSSCSSCSM** Simplex, SC-SC, OS1 1 2 5 10
MTPCSSCAPCSCAPC** Simplex, SCAPC-SCAPC, OS1 1 2 5 10
MTPCDLCDLCSM** Duplex, LC-LC, OS1 1 2 5 10
MTPCDSCDSCSM** Duplex, SC-SC, OS1 1 2 5 10
MTPCDSCAPCSCAPC** Duplex, SCAPC-SCAPC, OS1 1 2 5 10
Note:** Hybrid cords & other lengths are available on request.
OM1 62.5um Multimode Patch Cords
Part Number Description Lengths Available
MTPCDSTDSTMM** Duplex, ST-ST, OM1 1 2 5 10
MTPCDSCDSCMM** Duplex, SC-SC, OM1 1 2 5 10
MTPCDLCDLCMM** Duplex, LC-LC, OM1 1 2 5 10
MTPCMTRJMTRJMM** Duplex, MTRJ-MTRJ, OM1 1 2 5 10
Note:** Hybrid cords & other lengths are available on request.
OM3 50um Multimode Patch Cords
Part Number Description Lengths Available
MTPCDSCDSCOM3** Duplex, SC-SC, OM3 1 2 5 10
MTPCDLCDLCOM3** Duplex, LC-LC, OM3 1 2 5 10
MTPCMTRJMTRJOM3** Duplex, MTRJ-MTRJ, OM3 1 2 5 10
Note:** Hybrid cords & other lengths are available on request.
ts.
22
System Warranty
20 Year Cable Warranty System for Structured Cabling Systems
The Madison Technologies 20 Year Cabling System Warranty is designed to allow you to mix and match the very best features and benefits of
Madison, Garland, & Optimal branded voice, data, and optical product solutions.
The Warranty combines the performance and ease-of-installation strengths and benefits of a range of high quality products. The system
supports the operation of the standards based applications and protocols you specify, over the appropriate category of end-to-end cabling
performance – giving the customer ‘peace of mind’ that the whole solution is covered by a single 20 year warranty.
The Warranty is provided by Madison Technologies Pty Ltd (ABN 56 010 669 379) and covers each component product of a cabling solution
consisting of Madison, Garland, and/or Optimal branded products.
Subject to the terms and conditions of the Warranty, Madison Technologies will repair or replace any defective product for a period of 20 years if:
All installation work is undertaken by an ACMA Registered Cabler.
Only high quality UL verified and Australian Standards compliant products are used, and the installation is fully in accordance with
AS/NZ 3080-2003 installation & performance requirements.
Eligibility is also no-fuss; simply ensure compliance with the following criteria and Madison Technologies looks after the rest.
A Registration Form (MTF020) must be submitted prior to commencement and a complete set of final test results must be submitted at the
completion of installation verifying performance and compliance to all relevant standards and specifications.
Warranty Overview
The Madison Technologies products based system will be free from defects preventing the operation of standards based applications, protocols,
and performance for which the system has been certified. The applications and protocols are those recognised by standards bodies IEEE,
ANSI, ATM FORUM and ratified specifically for transmission over the class of cabling standard defined in TIA/EIA 568B, ISO IEC 11801, & AS/NZ
3080-2003.
Subject to the formal acceptance of the Registration Form submitted by the Cabler, Madison Technologies will warrant the Customer’s
agreed system for a period of 20 years to be free from defects preventing the operation of standards based applications and protocols over
the category of end-to-end cabling performance that the system has been certified. Madison Technologies Pty Ltd will repair or replace any
defective product for a period of 20 years.
The Customer is the owner, having title to the system being warranted.
The warranty covers all nominated permanent links or channels, provided they are entirely connected or cabled using Madison, Garland
and/or Optimal branded products.
Warranty Conditions
Madison Technologies’ obligations under this warranty are limited and conditional upon the following:
All installation work is undertaken by an ACMA Registered Cabler in accordance with the manufacturer’s installation specifications and in
accordance with the installation and system design requirements of AS/NZ 3080-2003 as applicable at the time of installation.
The Customer must register the system installation by completing and submitting within 15 business days of installation the Madison
Technologies warranty Registration Form. Madison Technologies will then supply a registration number to the Customer.
The Cabler must provide documentation showing the location and designation of all installed permanent links and channels.
The Cabler must provide complete electronic test results with a standard approved field tester for all links and channels for the category of
performance to be warranted.
Claims Procedure
In order to claim under this warranty the Customer must ensure that upon detection of any fault covered by this warranty:
The ACMA Registered Cabler is notified within 5 business days
Madison Technologies is notified within 10 days
All documentation relating to system design, purchase, installation and testing (but not limited to the aforementioned documentation),
held by the Customer be made available to Madison Technologies or its agents
Free and unfettered access to the site is available at all times to Madison Technologies or its agents.
i.
ii.
i.
ii.
iii.
i.
ii.
iii.
iv.
i.
ii.
iii.
iv.
23
System Warranty (Cont.)
Exclusions
This Warranty will not apply if the installation or products used therein are subject to any misuse, unauthorised alteration, abuse, neglect,
accidental damage, natural disaster or if it has not been designed, installed or tested in accordance with the terms of this Warranty.
Furthermore, this Warranty will not apply where:
Installation was performed by a non-accredited ACMA Cabler;
The system was not tested to comply with the requirements of AS/NZ 3080-2003 as applicable at the time of installation or testing as the
case may be;
The Customer’s existing system does not form part of this Warranty Agreement
Modifications, changes or alterations to the system have been performed without Madison Technologies formal authorisation
Components other than Madison Technologies approved products have been installed.
A Registration Form (MTF020) must be submitted prior to commencement and a complete set of final test results must be submitted at the
completion of installation verifying performance and compliance to all relevant standards and specifications.
Limitations
The following limitations apply subject to any contrary provision of the Trade Practices Act 1974 (Cth):
Repair or replacement of components in the Madison Technologies 20 Year Structured System Cable Warranty Program certified system
by Madison Technologies or its designated ACMA Registered Cabler is the exclusive remedy to be provided under this warranty.
The warranty is limited to the customer for whom it was installed and is not transferable.
This warranty provided by Madison Technologies is in lieu of all other warranties, express, implied or statutory, by Madison Technologies,
including without limitation, the warranties of merchantability or fitness for a particular purpose. Neither Madison Technologies nor the
ACMA Registered Cabler will be liable for down-time, inconvenience, business disruption, damage to property, punitive damages or any
other incidental or consequential damages caused by any failure of the Madison Technologies Certified Structured Cabling System or its
components.
This Warranty replaces any other previous warranty offered by Madison Technologies;
This Warranty and the remedies provided there under are intended to constitute the sole recourse that a Customer has against Madison
Technologies or its agents.
Madison Technologies will in no case be liable to the Customer for any special, indirect, incidental or consequential damages (whether in
contract, tort or otherwise) including, without limitation, lost profits or economic loss arising out of the failure of the system.
The liability of Madison Technologies in respect of any claim by the Customer against it is in every case limited to the cost of repairing or
replacing any defective product for 20 years.
Eligibility
The system to be certified must be entirely installed and commissioned by an authorised ACMA Registered Cabler.
Only high quality UL verified and Australian Standards compliant Madison, Garland, & Optimal branded products are used, and installed
in accordance with AS/NZ 3080-2003.
A Registration Form must be submitted prior to commencement and a complete set of final test results must be submitted at the completion
of installation verifying performance and compliance to all relevant standards and specifications.
Quality Assurance
Madison Technologies’ commitment to quality and safety is total in every respect. Madison is fully endorsed to ISO 9001:2000 standards and
has Australian Federal and State Government purchasing accreditation. We will continue to maintain the highest level of Quality Assurance
available.
i.
ii.
iii.
iv.
v.
i.
ii.
iii.
iv.
v.
vi.
vii.
•
•
•
24
25
Section 2
R&M Solutions
Company Introduction - 26
Cable - 27
Connection Modules - 28
Patch Panels - 30
Voice Integration - 34
Global Patch Panels - 35
Outlets - 36
Splice Trays - 40
Patch Cords - 43
Optical Fibre Pigtails and Patchcords - 45
Optical Fibre Pre-polished Connectors - 46
Security Systems - 47
Micro Splitter - 49
System Warranty - 50
26
Company Introduction
Reichle & De-Massari AG (R&M) is an independent family enterprise with 42 years of experience in the information and communication
technology market (ICT). R&M successfully concentrate on passive cabling solutions for communication networks (layer 1). As a result of the
copper and optical fibre products, outstanding quality and commitment to their customers and their requirements, R&M have acquired an
enviable reputation. Today, R&M sets standards in modularity, quality and ease of installation and maintenance. R&M have worked their way to
the market-leading position in Switzerland and are growing internationally. The company now has subsidiaries in eight countries and a global
network of qualified distributing partners.
R&M are committed to innovative solutions and invest nearly 10% of their turnover in research and development every year. With great
success! Today, 35% of their turnover is achieved with products less than 3 years old. A remarkable feature of R&M is a profound experience and
competence in connecting and distributive technology for copper and optical fibre networks. R&M supply convincing cabling solutions to the
segments of enterprise and carrier cabling on the basis of these technologies, while actively growing in markets of residential and industrial
cabling.
There is a general 5 year warranty for all R&M products published in this catalogue (except all active components).
Additionally some products are covered by the 20 year system warranty and lifetime application warranty.
27
Cable
Real10
R&M’s Real10 solutions provide excellent protection against alien crosstalk and the assurance of reaching true 10 Gigabit speeds. Real10 installation cable is suitable for voice, video and data transmissions for frequencies of up to 1200 MHz and complies with 10GBase-T requirements of IEEE802.3an.
Real10 Cat 7, S/FTP - Installation Cable
FeaturesReal10 Cat 7, S/FTP cableFoil and tin-plated copper braid shielding100 ohm impedanceData transmission frequency of up to 1200 MHz
Description Part Number
4 Pair, Real10 Cat 7, S/FTP, LSFRZH, Grey, 500m Reel
R306258
Real10 Cat 7, S/FTP - Industrial
R&M’s industrial cables are suitable for installation in extreme environmental conditions. It is water and oil repellent, and UV resistant. This cable is suitable for indoor and outdoor installations.
FeaturesReal10 Cat 7, FL.RET cableFoil and tin-plated copper braid shielding of pairs100 ohm impedanceData transmission frequencies of up to 900 MHzTemperature range: -20°C to +60°CHalogen-free and flame-retardantWater tight layer jacket
Description Part Number
4 Pair, Real 10 Cat 7, S/FTP, Grey, 500m Reel
R313683
Real10 Cat 6, S/FTP - Installation Cable
FeaturesReal10 Cat 6, S/FTP cableFoil and tin-plated copper braid shielding of pairs100 ohm impedanceData transmission frequencies of up to 650 MHz
Description Part Number
4 Pair, Real10 Cat 6, S/FTP, LSZH, Grey, 500m Reel
R305649
Real10 Cat 6, U/UTP - Installation Cable
FeaturesReal10 Cat 6, U/UTP cable100 ohm impedanceData transmission frequencies of up to 650 MHz
Description Part Number
4 Pair, Real10 Cat 6, U/UTP, LSZH, Blue 500m Reel
R312808
••••
•••••••
••••
•••
Category 6
Category 6 U/UTP - Installation Cable
R&M installation cable is suitable for voice, video and data transmissions for frequencies of up to 450 MHz. This cable is available with a PVC or LSZH sheath.
FeaturesReal10 Cat 6, U/UTP cable100 ohm impedanceData transmission frequencies of up to 450 MHz
Description Part Number
4 Pair, Cat 6, U/UTP, PVC, White, 500m Reel
R35056
4 Pair, Cat 6, U/UTP, LSZH, White, 500m Reel
R35057
Category 5e
Category 5e U/UTP - Installation Cable
R&M installation cable is suitable for voice, video and data transmissions for frequencies of up to 200 MHz. This cable is available with a PVC or LSZH sheath.
Description Part Number
4 Pair, Cat 5e, U/UTP, PVC, White, 305m Reel
R35291
4 Pair, Cat 5e, U/UTP, LSZH, White, 305m Reel
R35292
Category 5e F/UTP - Installation Cable
R&M installation cable is suitable for voice, video and data transmissions for frequencies of up to 200 MHz. This cable has an aluminium foil shield and tin-plated copper drain wire and is available with a PVC or LSZH sheath.
Description Part Number
4 Pair, Cat 5e, F/UTP, PVC, White, 500m Reel
R35048
4 Pair, Cat 5e, F/UTP, LSZH, White, 500m Reel
R35049
Category 5e S/FTP - Industrial
R&M’s industrial cables are suitable for installation in extreme environmental conditions. It is water and oil repellent, and UV resistant. This cable is suitable for indoor and outdoor installations.
FeaturesCat 5e, S/FTP cableFoil and tin-plated copper braid shielding of pairs100 ohm impedanceData transmission frequencies of up to 200 MHzTemperature range: -20°C to +60°C
Description Part Number
4 Pair, Cat 5e, S/FTP, LSFRZH, Grey, 500m Reel
R309319
•••
•••••
up to 1200 MHz
f up to 650 MHz
f up to 650 MHz
p to 450 MHz
f up to 200 MHz0°C
28
Connection Modules
Optical Fibre
GOF Adapter SC-RJ
The SC-RJ IP67 connector developed by R&M is a new optical fibre connector of protection class IP67 that unites a unique range of features, and supports applications of up to 10 Gigabit Ethernet. The connector system is a first of its kind for industrial applications, designed in small form factor and featuring 2.5mm ferrule technology, a safety system and double colour coding.
FeaturesAdapter SC-RJSupport plate fits R&M patch panels, faceplates and boxesSnap-In fits R&M 24 port patch panel and faceplatesIndustrial fits R&M IP67 housing
Description Alignment Sleeve Support plate Part Number
Snap-InPart Number
IndustrialPart Number
Black, Ceramic SM, C Zirconia Ceramic R308461 R312695 R311496
Black, PhBr MM, M Phosphor Bronze R308459 R312775 R309641
Universal Adaptors
R&M Universal Adaptors feature a mounting frame to fit R&M patch panels, surface mount boxes, outlets and faceplates. The Universal Adaptor allows for the appropriate connector to be fitted. R&M Universal Adaptors give you more flexibility in your choice of cabling media and mounting options.
FeaturesMounting Frame for R&M patch panels, surface mount boxes, outlets and faceplates Solution for mixed media environments
Description Part Number
Mounting Frame for BNC Connector R318746
Mounting Frame for F Connector R318741
Mounting Frame for SSC/DLC/E2000™ Through Adaptor R318742
Mounting Frame for ST Through Adaptor R318743
••
•
•
•
•
RJ45
Real10 Category 6
As part of a Real10 Category 6 channel, the Real10 connection module exceeds the minimum requirements of the IEEE 802.3an draft on 10GBASE-T performance. These connection modules exceed Cat 6 specifications according to ISO/IEC 11801, EN 50173 and TIA/EIA 568B in the entire admissible range and give maximum reliability through special contact design without internal transfer points. They feature capacitive and inductive compensation and are Delta, GHMT and 3P certified.
FeaturesRJ45 Real10 Cat 6 connection moduleShielded or unshieldedDust coverCable tie
DescriptionAdditional Features
Part Number
RJ45 Connection Module Real10 Cat 6, Unshielded
Mounting Plate, WARP Cover
R313083
RJ45 Connection Module Real10 Cat 6, Shielded
Mounting Plate, EMC Cover
R304327
RJ45 Connection Module Real10 Cat 6, Unshielded, Snap-in
Snap-in frame, WARP Cover
R313092
RJ45 Connection Module Real10 Cat 6, Shielded,
Snap-in
Snap-in adapter, EMC Cover
R308732
Category 6
FeaturesRJ45 Cat 6 connection module, unshieldedMounting plateWARP coverDust coverCable tie
Description Part Number
RJ45 Connection Module Cat 6, Unshielded R304328
RJ45 Connection Module Cat 6, Unshielded, Snap-in R308734
Category 5e
R&M connection modules are compliant with category 5e requirements of relevant cabling standards (ISO/IEC 11801, EN 50173 and TIA/EIA 568B). They reach category 5e values of IEC 60603-7 together with R&M category 5e patch cords of the R&Mfreenet cabling system, 3dB better NEXT values at 100 MHz than category 5 (1995). They are compatible with category 5e standard plugs and are SGS certified.
FeaturesRJ45 Cat 5e connection moduleMounting plateDust coverCable tie
OptionsUnshielded or shielded
Description Additional Features Part Number
RJ45 Connection Module Cat 5e, Unshielded Mounting plate R304326
RJ45 Connection Module Cat 5e, Shielded Mounting plate, EMC cover R304325
RJ45 Connection Module Cat 5e, Unshielded, Snap-in Snap-in adapter R308733
RJ45 Connection Module Cat 5e, Shielded, Snap-in Snap-in adapter, EMC Cover R308731
••••
•
••••
•
•••
•
29
Accessories
Colour Coding Clips
Colour coding clip to suit R&M Snap-in Connection Modules and 24 Port Patch Panel.
Description Part Number
Snap-in colour coding clip, Blue
R302152
Snap-in colour coding clip, Green
R302154
Snap-in colour coding clip, Red
R302155
Snap-in colour coding clip, Violet
R302156
Snap-in colour coding clip, White
R302157
Snap-in colour coding clip, Yellow
R302158
Dust Cover for RJ45 Jack
Protects RJ45 jack contacts from dirt and dust.
Part Number R925602
Hinged Dust Cover
Dust cover and colour coding for RJ45 outlets and patch panels fitted with smart holes.
Colour Part Number
Blue R305686
Green R305690
Red R305691
Violet R305692
Yellow R305688
Hand Terminated RJ45 Plug
FM-45 RJ45 Plug
FeaturesFirst tool-free, field-terminated Cat 5e/RJ45 plugWide range of applications, dependable solid constructionAccepts unshielded (UTP) and shielded (STP) cables up to 8 mm in diameter, and wires or strands up to 26 AWGLong-term stability, vibration resistance, strain relief and the possibility of repeated termination provided by IDC conductor contacting plus quick mounting techniqueCable shield EMC protection is 180°CAccepts larger overall diameter cables that may not fit normal crimp plugs
OptionsOptional colour coding clips
Part Number R312231
FM-45 Plug Colour Coding Clips
Colour coding clip to suit R&M field terminated plugs.
Description Part Number
Colour coding clip, Blue R311580
Colour coding clip, Green R311577
Colour coding clip, Red R311571
Colour coding clip, Violet R311575
Colour coding clip, Yellow R311579
•••
•
••
• s
30
Patch Panels
R&M patch panels are used for terminating horizontal or backbone installation cables and for serving as an interface to the various network
equipment. In horizontal cabling, the RJ45 ports of the patch panel are connected in a star topology by four pair installation cables to the
telecommunications outlets. In this way, network equipment such as host computers, concentrators, PABXs and so forth can be easily connected
to the desired telecommunications outlets by means of patch/line cables. All R&M patch panels and connection modules comply with the
standards of ISO/IEC 11801, EN 50173 and TIA/EIA 568B. The R&M patch panel range offers the industries most flexible and modular solution.
24 Port Patch Panel
Real10 Category 6
Real10 24 port patch panels are fully populated with RJ45 Real10 Cat 6 connection modules. Real10 solutions provide excellent protection against alien crosstalk and the assurance of reaching true 10 Gigabit speeds. The easy to read labelling is complemented by the use of optional colour coding clips.
FeaturesFully populated19” 1U 24 port metal patch panel, integrated cable tie shelf24 Real10 Cat 6 connection modules19” mounting kit4 labelling stripsCable ties
Description Part Number
Real10 Cat 6 Patch Panel, 1RU, 24 port, Unshielded R313087
Real10 Cat 6 Patch Panel, 1RU, 24 port, Shielded R305120
Category 6
FeaturesFully populated19” 1U 24 port metal patch panel, integrated cable tie shelfCat 6 connection modules, RJ45/U including dust covers19” mounting kit4 labelling stripsCable ties
Description Part Number
Cat 6 Patch Panel, 1RU, 24 port, Unshielded R305117
Category 5e
R&M patch panels provide high density results in a capacity of 24 shielded or unshielded RJ45 connections. Every module is individually terminated facilitating more effective moves and changes without the risk of compromising adjacent connections.
FeaturesFully populated19” 1U 24 port metal patch panel, empty, integrated cable tie shelf24 Cat 5e connection modules19” mounting kit4 labelling stripsCable ties
Description Part Number
Cat 5e Patch Panel, 1RU, 24 port, Unshielded R305118
Cat 5e Patch Panel, 1RU, 24 port, Shielded R305121
••••••
••••••
••••••
31
16 Port Patch Panel
Real 10 Category 6
Real10 16 Port patch panels are fully populated with RJ45 Real 10 connection modules. The 16 Port panel offers true flexibility, the smart holes allow the fitting of security, colour coding, and dust protection solutions.
FeaturesFully populated19” 1U 16 Port patch panel16 Real10 Cat 6 connection modules, including EMC covers and dust covers19” mounting kitIntegral cable management eliminates the need for separate management panels4 labelling stripsCable tiesInstallation instructionsAllows fibre connectors and splice cassettes to be fitted
Description Part Number
Real10 Cat 6, 19” 1U Patch Panel, 16 x RJ45 Unshielded R313086
Real10 Cat 6, 19” 1U Patch Panel, 16 x RJ45 Shielded R305887
Category 6
FeaturesFully populated19” 1U 16 Port patch panel, empty, unshielded16 Cat 6 connection modules, RJ45/u including dust covers19” mounting kit3 jumper brackets4 labelling stripsCable tiesInstallation instructions
Description Part Number
Cat 6, 19” 1U Patch Panel, 16 x RJ45 Unshielded R305888
Category 5e
FeaturesFully populated19” 1U 16 Port patch panel16 Cat 5e connection modules, including dust covers19” mounting kitIntegral cable management eliminates the need for separate management panels4 labelling stripsCable tiesInstallation instructions
Description Part Number
Cat 5e 19” 1U Patch Panel, 16 x RJ45 Unshielded R305885
Cat 5e 19” 1U Patch Panel, 16 x RJ45 Shielded R305886
•••••••••
••••••••
••••••••
R313086
R305887
32
16 Port Patch Panel (Cont.)
Empty
19” 1U patch panel with a capacity for optical fibre or RJ45 connection modules.
Features19” 1U 16 Port patch panel, empty, unshielded19” mounting kitIntegral cable management eliminates the need for separate management panels4 labelling stripsInstallation instructions
Description Suitable Part Number
Patch Panel, 16 Port, CM Tray, Empty RJ45 Unshielded & Fibre Modules R305890
Patch Panel, 16 Port, CM Tray, Empty RJ45 Shielded & Fibre Modules R305889
Optical Fibre To Fit 16 Port Panel
Splice Version
FeaturesFront plate with adaptors and connector pigtails4 connectors per moduleAdaptors with phosphorus bronze (PhBr) alignment sleevesCompatible with 1U 16 Port patch panels
R309132
Description Part Number
4 x SC-RJ, PC, M, OM1 (62.5μm) R309132
4 x SC-RJ, PC, M, OM3 (50μm) R309134
Breakout Version
FeaturesFour channel module with adaptorsOver length guardAdaptors with phosphorus bronze (PhBr) alignment sleevesCompatible with 1U 16 Port patch panels
Description Part Number
4 x SC-RJ, PC, M R309138
•••
••
•
••
•
•
••
•
Cable Management
Jumper Steel Ring Panel
For a neat, horizontal routing of patch cords between patching fields. Fast and tool-free assembly of jumper brackets.
Features19” mounting kit
R310765 R310774
Description No. of Jumpering Brackets (Metal) Part Number
19” 1U Jumper Ring Panel, Steel 4 R310765
19” 2U Jumper Ring Panel, Steel 8 R310774
19” Jumper Ring Panel
Plastic plate with four mounted jumpering brackets. For a neat, horizontal routing of patch cords between patching fields. The reinforced plastic plate and snap-in jumpering brackets provide additional stability and a quick mounting.
Features19” mounting kit
R306179 R306180
Description No. of Jumpering Brackets (Plastic) Part Number
19” 1U Jumper Ring Panel, Plastic 4 R306179
19” 2U Jumper Ring Panel, Plastic 8 R306180
19” Lateral Radius Guard
The radius guard guarantees compliance with admissible bending radii of copper and optical fibre cables. The guard is mounted to the front of 19” racks.
FeaturesLateral radius guard, leftLateral radius guard, rightVelcro fastening 19 x 400 mmColour- medium grey
Part Number R306181
•
•
••••
33
Patch Panel Accessories
Universal Blind Cover
FeaturesTo cover one unused connection module portSnaps into smartholesColour - light grey
Part Number R305766
Labelling Sheet, 24 Port Patch Panel
FeaturesSuitable for laser printersMaterial: paper, white, perforatedA4 sheet with 54 strips
Part Number R305090
•••
•••
ed
34
Voice Integration
Voice panels are neatly structured compact telephone connection interfaces designed to ensure flexible and efficient cabling of all telephone
applications. Their 19” design makes for straightforward integration into generic cabling systems. With a capacity for up to 50 two pair
communication services they cover analog as well as digital systems and thanks to their modular design and individual labelling possibilities
they can be smoothly integrated into generic cabling systems at any time.
Voice Panels
RJ45 Voice Panel
Features19” 1RU voice panel with up to 50 RJ45/u portsCategory 3 compliant in according to ISO/IEC 11801, EN 50173 & EIA/TIA 568ATool-free EASY Lock termination technology (IDC) for cables with wire Ø0.25 mm to 0.65 mm (30-22AWG). Stranded wires = 26/7AWG to 24/7AWGAdmissible insulation Ø 0.7 mm to 1.6 mmLabel holder with exchangeable labelling stripsCable guide for optimum pair routingPrepared for grounding connection
Description Part Number
19” 1RU Patch Panel, 50 x RJ45, Empty, Grey R35115
Connection Module, 10 x RJ45/u R35116
Blind Cover
To cover one unused port on the voice panel and global panel.
Description Part Number
Blind Cover, light grey R35117
•••
••••
R35115 R35116
35
Global Patch Panels
Global Patch Panels
Real 10 Category 6
Features
Fully populated 19” 3U Global patch panel/u including cable tie shelf15 connection module holders60 Real10 Cat 6 connection modules, including covers and dust coversLabelling strips19” mounting kitCable tiesInstallation instructions
Description Part Number
Real 10 Patch Panel, 19” 3U, 60 x RJ45, Unshielded R313089
Real 10 Patch Panel, 19” 3U, 60 x RJ45, Shielded R302362
Category 6
Features
Fully populated19” 3U Global patch panel/u including cable tie shelf15 connection module holders Global/U60 Cat 6 connection modules, RJ45/U including dust coversLabelling strips19” mounting kitCable tiesInstallation instructions
Description Part Number
Cat 6 Patch Panel, 19” 3U, 60 x RJ45, Unshielded R302363
Category 5e
FeaturesFully populated19” 3U Global patch panel/U including cable tie shelf15 connection module holders60 Cat 5e connection modules, including dust coversLabelling strips19” mounting kitCable tiesInstallation instructionsGrounding System (Shielded)
Description Part Number
Cat5e Patch Panel, 19” 3U, 60 x RJ45, Unshielded R35407
Cat5e Patch Panel, 19” 3U, 60 x RJ45, Shielded R35409
••••••••
••••••••
•••••••••
R35407
36
Global Patch Panels (Cont.)
Multimedia
3U 19” Rack mounting Global Patch Panel (15GU), holds up to 15 x Connection Module Holder (1GU), 6 x FO Adaptor Global (2.5GU), or 5 x Voice Adaptor Global (3GU).
Features19” 3U Global patch panel/U including cable tie shelf19” mounting kitInstallation instructionsGrounding System (Shielded) R35409
Description Part Number
Multimedia, Patch Panel, 15GU, 19” 3U, Empty, Unshielded R35409
Multimedia, Patch Panel, 15GU, 19” 3U, Empty, Shielded R35408
FO Adaptor, Global, 2.5GU (for Fibre Module) R30870
Connection Module Holder
To be mounted into 19” 3U Global patch panels.
Holding capacity4 x Connection Modules RJ45 or SC-RJ4 x Universal adaptors1 x Fibre Optic Module, Global
FeaturesConnection module holderIntegrated grounding plateLabelling stripInstallation instructions
Description Holding Capacity Part Number
Unshielded 4 Position, IGU R35403
Shielded 4 Position, IGU R35402
Blind Cover, Global
For use with 19” 3U Global patch panels, shielded and unshielded.
Description Part Number
1 GU R35401
0.5 GU R302149
Voice Adapter, Global
To be mounted into 19” 3U Global patch panels.Holding capacity for 3 connectionmodules 10xRJ45.
FeaturesGlobal Voice Adapter4 labelling strips
Description Part Number
3 x10 ports, 3 GU R310400
Connection Module, 10 x RJ45/u R35116
Cable Duct, Global
Recommended for multi-pair telephone cables. Mounted onto the cable tie shelf of the Global patch panel, the cable duct ensures optimum cable management.
FeaturesCable duct, length 420mmMounting kit
Description Part Number
420 mm R310401
•
•••
•••
••••
••
••
Fibre Optic Module, Global
Four-Channel Module, Splice Version
Features3U four-channel module, with 1 splice tray radius 30 mm, fastening material, labelling strips and installation manualFront panel equipped with adaptors (phosphor bronze alignment sleeve) and connector pigtails (colour coding standard code DIN VDE 0888)
Description Part Number
4 x SC-RJ, PC, M, OM1 (62.5μm) R309142
4 x SC-RJ, PC, M, OM3 (50μm) R309129
R309142
Four-Channel Module, Breakout Version
Features3U four-channel module, fastening material, labelling strips and installation manualFront panel equipped with adaptors (phosphor bronze alignment sleeve)
Description Part Number
4 x SC-RJ, PC, M R309145
Outlets
Flush Mount Faceplates
Clipsal Adaptor for RJ45 Connection Module
Description Part Number
Adaptor for fitting RJ45 to Clipsal faceplates
R100996
Horizontal, 2 Port
Suitable for RJ45 connection modules, connection module ISDN 2xRJ45 and optical fibre connectors with support plates.
Features
Faceplate, type 503, holding 2x1 portHidden screwsBlind cover (when used as a 1 port outlet)Label stripsDimensions: 118mm wide x 72mm highPlastic: PC, PC + ABSHalogen Free
Description Part Number
2x1 Port, White R925782
Horizontal, 4 Port
Suitable for RJ45 snap-in connection module.
Features
Faceplate, type 503, for RJ45 snap-in connection modulesHidden screws2 blind covers (when used as a 2 port outlet)Label stripsDimensions: 118mm wide x 72mm highPlastic: PC, PC + ABS
Description Part Number
4x1 Port, White R304275
•
•
•
•
•••••••
••••••
R35403 R35402
J
R35401 R302149
R310400
R35116
t)
utlet)
37
Flush Mount Faceplates (Cont.)
Vertical, 6 Port
FeaturesVertical faceplateFastening screwsHidden screws6 x RJ45 module holder2 label strips, blankDimensions: 72mm wide x 118mm highPlastic: PC, Fibre glass reinforcedHalogen Free
Description Part Number
6x1 Port, White R925822
Surface Mount Box for 6 Port Face plate
FeaturesBase plateSurface-mount housingDimensions: 72mm W x 118mm H x 50mm DPlastic: PC, Fibre glass reinforcedHalogen Free
Description Part Number
Pure white R925824
Blind Cover Universal
For covering one unused port on a connection module. Snapped-on instead of a coding system.
Description Part Number
Pure white R925719
Surface Mount Boxes
Mini Surface Mount Box
The compact mini surface box is suitable for RJ45 connection modules and optical fibre connectors with support plates. The two-part design consists of a self-locking housing and a base unit. Cable entry is possible from below or from the rear with knock out section.
1 Port
FeaturesPlastic: PC + ASAHousing & base unitBlind cover (when 2 Port is used as a 1 port outlet)Label strips, blank (2 Port only)Installation manual
Description Size Part Number
1x1 Port, Cream 24 x 29 x 58 R303901
2x1 Port, White 34 x 53 x 60 R925728
••••••••
•••••
•••
••
Surface Mount Boxes (Cont.)
Compact 6 Port Housing
This compact housing is suitable for surface mounting installations or as a consolidation point in hollow floors. It can be used with RJ45 connection modules, connection module ISDN 2xRJ45 and optical fibre connectors (with support plates).
FeaturesMultifunctional unitInstallation cables up to Cat. 7 can be usedBase features integral strain relief lugsCover features cable entry break-out points at the side and the backSuitable for 3 module holders 2xRJ45Accepts optical fibre componentsFire classification UL94: V-0 Plastic PC + ABS
Description Part Number
6 Port Compact Housing, White R308971
U-Box Product Range
The U-Box was developed for easy installation and planning. The platform is designed for power, data and communications connections. Built-in clever functions allow the installer fast and cost-effective installation. The exchanging of fronts enables a multitude of power and communications installations. The box meets maximum load and fire load requirements. The integrated additional part makes stacking, aligning, fixation and raising possible. The U-Box is to create added value for the R&Mfreenet solution.
Part Number Description
R317073
U-Box housing without installation front Box
with base, cover, cable passage front,
6 connectors
R317082 Empty U-Box housing Box with base, cover,
6 connectors
R317074Front 4x45x45 For all installations with
45x45 installation rack, power and data
R317091Power Italia front 4x45x45
For mosaic outlets Italia
R317075Front 3xFLF For all installations with
54x32mm FLF installation track
R317076Front 8xRJ45 snap-in For RJ45 snap-in
connection modules
R317078
Front 2x10RJ45 voice modules
with 4xKA30x6mm screw For 10RJ45
connection modules
•••••••
R303901
R925728
PC + ABS
38
Surface Mount Boxes (Cont.)
Part Number Description
R317077Front 8x power snap-in For snap-in
connector Wago, Wieland
R317079 Blind front For specialized applications
R317080Cable passage front For 4x cable gland
M20-M25 and 2x data passages with 5 levels
R317081Separation cover Internal cover to
separate power and data
R317083Plug-in terminal strip Plug-in
terminals 5x2.5mm2
R317084Screwed terminal strip screw
terminals 5x2.5mm2
R318804FO tray radius 60mm radius for
FO breakout version
R313330Mounting plate 45x45
Mounting plate 2x1 white
R313333Mounting plate 45x45
Mounting plate 2x1 black
FB COMBIbox
Data outlet for 6 RJ45 R&Mfreenet modules, featuring 2 cable entries with strain relief lugs. Excludes modules and module frames.
Description Part Number
6x RJ45 R&Mfreenet R307810
Mounting Adapters
Module Holder for RJ45/SCRJ Adaptor
Colour Part Number
RJ45/SCRJ Adaptor, White R307832
RJ45/SCRJ Adaptor, Black R307833
DIN Rail Adaptor
DIN rail adaptor suitable for RJ45 connection modules and optical fibre connectors with support plates.
Description Part Number
DIN Rail Adaptor R314000
Light Industrial Outlets
R&M’s range of light industrial outlets are suitable for surface and flush mounting in wet locations where outlets need protection from water and dust conditions in accordance with IP 54. They can be used in conditions where outlets need protection from steam, hot water, oils, condensation, salty water, dust and general air pollution.
Flush Mounted Housing
FeaturesFoam-rubber padded mounting frameCover frameRound central plate including O-ring and fastening screwsLabel stripsLabel windowInstruction manual
R307036
Description Part Number
1 Port Flush Mount Housing, White R307037
2 Port Flush Mount Housing, White R307036
Surface Mounted Housing
FeaturesBottom part surface-mounted housingFoam-rubber padded mounting frameCover frameRound central plate including O-ring and fastening screwsLabel stripsLabel windowInstruction manual
R307039
Description Part Number
1 Port Surface Mount Housing, White R307038
2 Port Surface Mount Housing, White R307039
•••
•••
••••
•••
39
Light Industrial Outlets (Cont.)
Splash Caps
Combined with a matching outlet, the R&M environment system offers IP54 protection against dust and water for plugged connections and closed ports.
FeaturesSplash capRubber seal
Description Part Number
Splash Cap, Blue R306058
Splash Cap, Green R306061
Splash Cap, Red R306062
Splash Cap, White R306063
Splash Cap, Yellow R306060
Patch Cord Environmental Protection
Combined with a matching outlet, the R&M environment system offers IP54 protection against dust and water for plugged connections and closed ports. Included is a 3-prong sleeve expander which lets you fit splash sleeves on site. They are transparent so that the colour coding remains visible. All components are made of halogen-free material in accordance with DIN/VDE 0472/815, and resist the majority of environmental factors. The R&M environment system can be cost effectively added on site since its design fits R&M Smartholes. Colour coding clip to suit R&M Field Terminated Connectors.
Splash Sleeve
FeaturesElastic, transparent rubber sleeve suitable for all RJ45 patch cords.Together the Splash sleeve and the Splash cap offer protection class IP54.
Description Part Number
Splash Sleeve, Transparent R306064
Splash Sleeve Mounting Tool
FeaturesSleeve expander for fitting Splash sleeves onto patch cords.The expander features a mechanical stop so as not to overstretch the sleeves.
Description Part Number
3 Prong Sleeve Expander R306057
Heavy Industrial Outlets
The RJ45 IP67 complies with IAONA requirementsfor heavy duty environments. IAONA stands for International Alliance of Manufacturers and Operators of Automation Systems, and among other things, they set up the industrial ethernet standards. By IAONA definition heavy duty means demanding production environments as defined in protection index IP67 and standard IEC 6029.
IP67 Mounting Frame
FeaturesCompatible with SC-RJ and RJ45 one-channel module.Mounting frameGasket
Part Number R309588
••
••
••
•
••
Heavy Industrial Outlets (Cont.)
Protective Cover for IP67 Mounting Frame
FeaturesCover protecting the contact insert in the adapter frame or the sleeve housing.
Part Number R309589
Surface Mount Outlet Housing
R311624 R311625
FeaturesUL approved surface mount housing made of polycarbonateHeat resistant from -50°C to +100°CProtection class IP66/67 according to EN 60529Recognized in compliance with: Germanischer Lloyd, UL, cUL, GOST, SGS Fimko EN 50298Impact strength: IK08 acc. to EN 50102
Description Dimensions Part Number
1 Port Surface Mount Outlet Housing 80 x 120 x 56 R311624
2 Port Surface Mount Outlet Housing 120 x 122 x 56 R311625
Note: Excludes IP67 mounting frame and M20 cable glands
FO Wall-Mount Distributor
Features6 mounting frames IP67 including protective covers6 mounting holes for M20 cable glands plus blind covers2 mounting holes for M32 cable glands plus blind covers1 mounting plate for splice trays R30/R40, pigtail holders or cable guides1 wall-mount fastening kitInstallation instructions
Description Dimensions Part Number
6 x 1 port 300 x 300 x 80 R310722
IP67 Cable Gland
FeaturesCable gland IP67Counter-nut
Description Part Number
M20 R310726
M32 R310727
•
••••
•
•
•
•
•
••
••
id
40
Splice trays
Wall Mount
GOF Venus FLA for Cable-to-Cable Splicing
The Venus box is designed for cable-to-cable splicing and cable termination. The box is suitable for direct wall or wood pole mounting and complies with IP43 or IP54 protection ratings. The snap lock feature prevents accidental opening of the cover in case of vibrations and the box can be sealed or locked with a cylinder lock or padlock.
FeaturesVenus BoxBase plateGrounding clamp1 splice tray R30 including cover2 L.E. (local exchange) entry plugs for cables of Ø 10 to 25 mm2 quick installer clamps for L.E. cablesCable entry plug for 5 cables of Ø 5 to 13 mmInstallation instructions
Description Part Number
Without cylinder lock R309493
With cylinder lock R310761
Rack Mount
19” Sliding Enclosures
The UniRack and Fibre Easy trays allow up to 24 connectors on one height rack unit, enabling simple patch panel mounting and dismounting for splicing. The unit has a mounting depth of 230mm and is universally compatible with cable entry from the rear or from the side.
19” 1U UniRack
19” 1U slide-in unit, splice tray plate with splice trays, fastening material, labelling strips and installation manual. The front panel is equipped with adaptors (phosphor bronze alignment sleeve) and connector pigtails.
Features19” 1U Slide-in unit Front panel equipped with adapters (phosphor bronze) Connector pigtailsSplice tray plate with 2 splice trays (R40)Fastening materialLabelling strips R308496
Description Part Number
6xSC Duplex, PC,M, OM3 (50.0μm) R308496
12xSC Duplex, PC, M, OM1 (62.5μm) R308493
12xSC-RJ, PC, M, OM1 (62.5μm) R308484
12xSC Duplex, PC, M, OM3 (50μm) R308066
12xSC-RJ, PC, M, OM3 (50μm) R308067
12xLC Duplex, PC, M, OM1 (62.5μm) R308513
24xLC Duplex, PC, M, OM1 (62.5μm) R308514
12xLC Duplex, PC, M, OM3 (50μm) R308517
24xLC Duplex, PC, M, OM3 (50μm) R308518
24xST, PC, M, OM1 (62.5μm) R308489
24xST, PC, M, OM3 (50μm) R308069
Note: Loose tubes of a diameter above 3.5 mm can cause mounting problems. Connector pigtails 100% tested and supplied with test report.
••••
•
•
•
•
••
••
••
Rack Mount (Cont.)
19” 1U Fibre Easy
Features19” 1U Slide-in unit Front panel equipped with adapters (zirconia ceramic alignment sleeve) Three 2 x 15mm radius guardsFastening materialLabelling stripsInstallation manual
Description Part Number
12xSC Duplex, PC, C, OS1 (9μm)
R30692-12
12xSC Duplex, PC, M R308501
12xLC Duplex, PC, M R309619
24xLC Duplex, PC, C, OS1 (9μm) R309610
24xLC Duplex, APC 8°, C, OS1 (9μm) R309611
24xST, PC, M R308502
FO Cable Guide
The Optical fibre cable guide provides radius protection and Velcro tie points for patch cables. The FO Cable Guide does not use additional rack units, and snaps in to the mounting holes on R&M FibreEasy and UniRack fibre enclosures.
FeaturesCable guideVelcro fastener 600mmMaterial: 1.5mm sheet steelColour - powder-coated medium grey
Size Part Number
75mm R30315
110mm R302003
Splice Trays
FO Splice Tray Basic Set R30
To splice and store the first 12 FO terminations.
Features1 splice tray R301 splice tray R30 cover2 film hinges for cover4 cable ties2 screws for splice holder
SpecificationsMaterial: ABSColour: WhiteDimensions: 92mm W x 10mm H x 155 mm D
Part Number R30393
FO Splice Tray Additional Set R30
For the modular stacking of additional 12FO terminations per set.
Features1 splice tray R304 film hinges, small,
for stacking4 cable ties2 screws for splice holder
SpecificationsMaterial: ABSColour: WhiteDimensions: 92mm W x 10mm H x 155mm D
Part Number R30394
••
••••
••••
•••••
•••
••
••
•••
R30692-12
H 155 D
um grey
ds
t Number
41
Splice Trays (Cont.)
GOF Splice Holder R30/R40 for Splice Protection Heat Shrink Type
FeaturesSplice holderM3 fastening screw plus plastic screw
SpecificationsMaterial: POMColour: BlackDimension: 27 mm W x 5 mm H x 37 mm D
Part Number R30039-06
FO 12 Strain Relief Ø 0.9-1.1mm for Splice Tray R30/R40
For the strain relief of 12 FO individual optical fibres of Ø 0.9 to 1.1 mm. To snap onto splice trays radius 30/40 mm.
FeaturesStrain relief
SpecificationsMaterial: macrolonColour: RedDimensions: 30mm W x 6mm H x 7.5mm D
Part Number R30203
FO Splice Tray Basic Set R40
To splice and store the first 24 FO terminations.
Features1 splice tray R401 splice tray cover4 cable ties2 screws for splice holder
SpecificationsMaterial: PC and ABS-FR 2000Colour: Medium greyDimensions: 116mm W x 12.5mm H x 188 mm D
Part Number R308445
FO Splice Tray Additional Set R40
For the modular stacking of additional 24 FO terminations per set.
Features1 splice tray R404 film hinges, small, for stacking4 cable ties2 screws for splice holder
SpecificationsMaterial: PC and ABS-FR 2000Colour: Medium GreyDimensions: 116mm W x 10.5mm H x 188 mm D
Part Number R308444
••
•••
•
•••
••••
•••
••
••
•••
Splice Trays (Cont.)
GOF Splice Holder R40 for Splice Protections sandwich and heat shrink type
A maximum capacity of 12 sandwich splice protections or 12 heat shrink type. Suitable for splice trays radius 40 mm.
FeaturesSplice holderM3 fastening screw plus plastic screw
SpecificationsMaterial: PC and ABS-FR 2000Colour: Medium GreyDimension: 30mm W x 4.5mm H x 72mm D
Part Number R308448
FO 24 Strain Relief Ø 0.9-1.1 mm for Splice Tray R40
FeaturesStrain relief, tool-free
SpecificationsMaterial: PC and ABS-FR 2000Colour: RedDimensions: 34mm W x 6mm H x 7.5mm D
Part Number R308456
FO Warning Sign Set DE/FR/IT/EN
To stick to the FO pigtail covers.
Features1 laser signet1 warning sign German1 warning sign French1 warning sign Italian1 warning sign English
SpecificationsMaterial: plastic, adhesiveColour: Yellow/BlackDimensions: 84mm W x 26mm H x 0.2 mm D
Part Number R30021
••
•••
•
•••
•••••
•••
42
Optical Fibre Modular System
FO 19” 1U Sub-Rack
Capacity of up to 3 Fibre Modules.
FeaturesRack4 jumpering bracket setsFastening kit
SpecificationsMaterial: sheet steel 1.5 mmColour: powder-coated, Medium GreyDimensions: 482.6mm W x 43.6mm H x 195.7 mm D
Part Number R30872
FO Cover for 19” 1U Sub-Rack R30872
Protection against external mechanical factors. Opened and closed without tools.
FeaturesCover
SpecificationsMaterial: Anodized Aluminium
Part Number R30873
19” 3U Global Rack for 144 Fibres
Capacity of twelve 19” 3U 7HP Fibreliner slide-in units (144 terminations).
FeaturesGlobal patch panelInsertion guideFastening kit
SpecificationsColour: Medium GreyDimensions: 3U, 84HP
Part Number Description
R319101 3U Global Rack FO 144 Fibres
Accessories
Part Number Description
R318522 FibreModule Mounting Adaptor set 3HP Global
R318523 Mounting plate for FO cable guide set
R318527 FibreModule front plate 1TE, blind
R318528 FibreModule front plate 7TE, blind
R30871 Labelling sheet 7TE
R318522 R318523 R318527 R318528
•••
••
•
•
•
•••
••
Optical Fibre Modular System (Cont.)
FO 19” 1U Contact Drawer
For storing loose tubes, cable excess. Fitted underneath FO 3U Global Rack.
Features19” 1U contact drawerFastening materialExcluding FO baffle guides
SpecificationsMaterial: sheet steelColour: Medium GreyDimensions: 482.6mm W x 43.6mm H (1U) x 230 mm D
Part Number R305374
FO 19” 1U Patch Cord Tray
Patch cord deposit on one height unit to store excess patch cord. One patch cord tray accommodates 50 m of excess length.
Features19” 1U patch cord tray without radius guardFastening material
SpecificationsMaterial: sheet steelColour: Medium GreyDimensions: 482.6 mm W x 43.6mm H (1U) x 230 mm D
Part Number R305758
FibreModule Splice Version
FibreModule, Splice, 12 x ST Simplex
Part Number Description
R318281 OM1, PC, PhBr, M/4
R318337 OM3, PC, PhBr, M/4
R318943 OS1, PC, PhBr, D/3
FibreModule, Splice, 12 x SC Simplex
Part Number Description
R318951 OS1, PC, Ceramic, C/2
R318952 OS1, APC, Ceramic, C/1
FibreModule, Splice, 6 x SC Duplex
Part Number Description
R318285 OM1, PC, PhBr, M/4
R318343 OM3, PC, PhBr, M/4
R318946 OS1, PC, PhBr, D/3
R318955 OS1, PC, Ceramic, C/2
R318965 OS1, APC, Ceramic, C/1
FibreModule, Splice, 6 x LC Duplex
Part Number Description
R318890 OM1, PC, PhBr, M/4
R318555 OM3, PC, PhBr, M/4
R318953 OS1, PC, Ceramic, C/2
R318963 OS1, APC, Ceramic, C/1
•••
•••
•
•
•••
hanical factors. Opened and
um
dules.
s
mm
43
Optical Fibre Modular System (Cont.)
FibreModule, Breakout, 12 x ST Simplex
Part Number Description
R318289OM1/OM2/OM3,
PC, PhBr
R318990 OS1, PC, PhBr
FibreModule, Breakout, 12 x SC Simplex
Part Number Description
R318988 OS1, PC, Ceramic
R318989 OS1, APC, Ceramic
FibreModule, Breakout, 6 x SC Duplex
Part Number Description
R318288OM1/OM2/OM3, PC,
PhBr
R318998 OS1, PC, Ceramic
R318999 OS1, APC, Ceramic
FibreModule, Breakout, 6 x LC Duplex
Part Number Description
R318771OM1/OM2/OM3,
PC, PhBr
R318993 OS1, PC, Ceramic
R318780 OS1, APC, Ceramic
Patch Cords
Real 10 Category 6
Patch Cord, Real 10, Cat 6, S/FTP, 4P, LSFRZH, RJ45/s-RJ45/s
R&M’s Real10 solutions provide excellent protection against alien crosstalk and the assurance of reaching true 10 Gigabit speeds. Real10 installation cable is suitable for voice, video and data transmissions for frequencies of up to 650 MHz.
SpecificationsCable Identification: S/FTPOuter Jacket: LSFRZHColour: GreyConductor Diameter Copper Strand: 26/7AWGScreened in Pairs: Aluminium FoilOverall Screen: Copper BraidOuter Diameter: 6 mm
Length Part Number
0.5m R302331
1.0m R302332
2.0m R302334
3.0m R302335
5.0m R302336
10.0m R302338
•••••••
Real 10 Category 6 Consolidation Point Cable
Consolidation point cables are used in horizontal cabling applications of open cabling systems. They are the link between the central distributor and the work place outlet. Consolidation point flex cables are available in shielded and unshielded versions. Their installation is simple and saves a lot of time. Connection 1:1 between connector and RJ45 module.
CP Cable, Real 10 Cat 6, S/FTP, 4, LSFRZH, RJ45/s-RJ45/s
SpecificationsCable Identification: S/FTPOuter Jacket: LSFRZHColour: GreyConductor Diameter Copper Strand: 26/7AWGScreened in Pairs: Aluminium/Polyester FoilOverall Screen: Copper BraidOuter Diameter: 6 mm
Length Part Number
7.5 m R307092
10.0 m R307093
15.0 m R307094
Category 6
Patch Cord, Cat 6, U/UTP, 4P, LSZH, RJ45/u-RJ45/u
SpecificationsCable Identification: U/UTPOuter Jacket: LSZHColour: GreyConductor Diameter Copper Strand: 26/7AWGScreened in Pairs: noOverall Screen: noOuter Diameter: 5.6 mm
Length Part Number
0.5 m R302309
1.0 m R302310
2.0 m R302312
3.0 m R302313
5.0 m R302314
10.0 m R302316
•••••••
•••••••
lex
ex
d
44
Category 6 Consolidation Point Cable
CP Cable, Cat 6, U/UTP, 4P, LSZH, RJ45/u-RJ45/u
RJ45/u connector + Category 6 connection module
SpecificationsCable identification: U/UTPOuter Jacket: LSZHColour: GreyConductor Diameter Copper Strand: 26/7AWGScreened in Pairs: noOverall Screen: noOuter Diameter: 5.6mm
Length Part Number
7.5m R307089
10.0m R307090
15.0m R307091
Category 5e
Patch Cord, Cat 5e, U/UTP, 4P, PVC, RJ45/u - RJ45/u
R&M’s Category 5e patch cords are suitable for voice and data transmissions for frequencies of up to 200 MHz. They are compliant with Category 5e requirements: ISO/IEC 11801 2, EN50173, EN 50168 and EIA/TIA 568A/B.
SpecificationsCable Identification: U/UTPOuter Jacket: PVCColour: GreyConductor Diameter Copper Strand: 26/7AWGScreened in Pairs: NoOverall Screen: NoOuter Diameter: 5.1mm
Length Part Number
0.5m R305014
1.0m R305015
2.0m R305020
3.0m R305021
5.0m R305022
10.0m R305024
Patch Cord, Cat 5e, SF/UTP, 4P, LSFRZH, RJ45/s-RJ45/s
SpecificationsCable Identification: SF/UTPOuter Jacket: LSFRZHColour: GreyConductor Diameter Copper Strand: 26/7AWGScreened in Pairs: NoOverall Screen: Copper Braid + Aluminium FoilOuter Diameter: 5.5mm
Length Part Number
1.0m R305040
2.0m R305042
3.0m R305043
5.0m R305044
10.0m R305046
•••••••
•••••••
•••••••
Category 5e Consolidation Point Cable
Consolidation point cables are used in horizontal cabling applications of open cabling systems. They are the link between the central distributor and the work place outlet. Consolidation point flex cables are available in shielded and unshielded versions. Their installation is simple and saves a lot of time. Connection 1:1 between connector and RJ45 module.
CP Cable, Cat 5e, SF/UTP, 4P, LSFRZH, RJ45/s-RJ45/s
SpecificationsCable Identification: SF/FTPOuter Jacket: LSFRZHColour: GreyConductor Diameter Copper Strand: 26/7AWGScreened in Pairs: NoOverall Screen: Copper Braid + Aluminium FoilOuter Diameter: 5.5mm
Length Part Number
7.5m R307086
10.0m R307087
15.0m R307088
CP Cable, Cat 5e, U/UTP, 4P, PVC, RJ45/u-RJ45/u
RJ45/u connector and Category 5e connection module
SpecificationsCable Identification: U/UTPOuter Jacket: PVC Colour: GreyConductor Diameter Copper Strand: 26/7AWGScreened in Pairs: NoOverall Screen: NoOuter Diameter: 5.1mm
Length Part Number
7.5m R307083
10.0m R307084
15.0m R307085
Harsh Environment Real10 Category 6
R&M’s heavy environment patch cords are equiped with PUR jackets, ideal for use in harsh environments. They are available in different combinations and lengths, IP20 up to IP67. They are compliant with Category 6 standard ISO/IEC 11801.
Patch Cord, Real10 Cat 6, S/FTP, PUR, RJ45/s, IP67-IP67
Length Part Number
2.5m R313641
5.0m R313642
7.5m R313643
10.0m R313640
Patch Cord, Real10 Cat 6, S/FTP, PUR, RJ45/s, IP67-IP20
Length Part Number
2.5m R313637
5.0m R313638
7.5m R313639
10.0m R313636
••••
••
•
••••
•••
+ Aluminium Foil
45
Optical Fibre Pigtails
and Patchcords
SC Simplex, SC Duplex, SC-RJ
GOF Pigtail, SC
FeaturesOne side fitted with SC plugPigtail sheath colour: SM G 652.D OS1 = Yellow MM OM1 = Blue MM OM3 = Turquoise (semi-buffer)Plug colour: SM PC = Blue SM APC 8° = Green MM OM1 = Beige MM OM3 = Beige
Description Length Part Number
APC 8°, Green, OS1 (9μm), C 2.5m R31015
PC, Blue, OS1 (9μm), C 2.5m R31014
PC, Beige, OM1 (62.5μm), M 2.5m R301462
PC, Beige, OM3 (50μm), M 2.5m R307388
GOF Patch Cord 3 mm, SC APC
FeaturesBoth sides fitted with SC APC 8° plugSM G 652.D (OS1), 9μm, YellowPlug colour: Green
Length Part Number
2m R31026
3m R31027
5m R31029
GOF Patch Cord 3 mm, SC PC
FeaturesBoth sides fitted with SC PC plugSM G 652.D (OS1), 9μm, YellowPlug colour: Blue
Length Part Number
2m R30602
3m R30603
5m R30605
GOF Patch Cord 2.7x5.4 mm, SC Duplex PC
FeaturesBoth sides fitted with SC Duplex PC plugSM G 652.D (OS1), 9μm, YellowPlug colour: Blue
Length Part Number
2m R303343
3m R303344
5m R303346
••
•
•••
•••
•••
SC Simplex, SC Duplex, SC-RJ (Cont.)
GOF Patch Cord 2.7x5.4 mm, SC-RJ PC, black/black - SC-RJ PC, black/black, M
FeaturesBoth sides fitted with SC-RJ PC plugMM (OM1) and MM (OM3), OrangePlug colour: Black
Length OM1 (62.5μm)
OM3 (50μm)
1m R30581 R310819
2m R30582 R310820
3m R30583 R310821
5m R30585 R310822
GOF Patch Cord 2.7x5.4 mm, SC Duplex PC, SC Duplex PC
FeaturesBoth sides fitted with SC Duplex PC plugMM (OM1), OrangePlug colour: Beige
Length OM1 (62.5μm) OM3 (50μm)
1m R303985 R312877
2m R303986 R307527
3m R303987 R307528
5m R303989 R307529
•••
•
••
ellow
ug
w
emi-buffer)
5.4 mm,plex PC
M3), Orange
C Duplex PC plugYellow
PC plugYellow
46
LC
GOF Pigtail, LC
FeaturesOne side fitted with LC plugPigtail sheath colour: SM G 652.D OS1 = Yellow MM OM1 = Blue MM OM3 = Turquoise (semi-buffer)Plug colour: SM PC = Blue SM APC 8° = Green MM OM1 = Beige MM OM3 = Beige
Description Part Number
APC 8°, Green, OS1 (9μm), C, 2.5m R308899
PC, Blue, OS1 (9μm), C, 2.5m R308898
PC, Beige, OM1 (62.5μm), M, 2.5m R308900
PC, Beige, OM3 (50μm), M, 2.5m R308902
GOF Patch Cord 2.0x4.1 mm, LC Duplex APC 8°
FeaturesBoth sides fitted with LC Duplex APC 8° plugSM G 652.D (OS1), 9μm, YellowPlug colour: Green
Length Part Number
2m R308916
3m R308917
5m R308918
GOF Patch Cord 2.0x4.1 mm, LC Duplex PC
FeaturesBoth sides fitted with LC Duplex PC plugSM G 652.D (OS1), 9μm, YellowPlug colour: Blue
Length Part Number
2m R308903
3m R308904
5m R308905
GOF Patch Cord 2.0x4.1 mm, LC Duplex PC
FeaturesBoth sides fitted with LC Duplex PC plugMM (OM1) and MM (OM3), 9μm OrangePlug colour: Beige
LengthOM1
(62.5μm)OM3
(50μm)
1m R310296 R310288
2m R308926 R308950
3m R308927 R308951
5m R308928 R308952
••
•
•••
•••
•••
ST
GOF Pigtail, ST
FeaturesOne side fitted with ST plugPigtail sheath colour: SM G 652.D OS1 = Yellow MM OM1 = blue MM OM3 = turquoise (semi-buffer)
Description Part Number
PC, OS1 (9μm), D, 2.5m R313152
PC, OM1 (62.5μm), M, 2.5m R307300
PC, OM3 (50μm), M, 2.5m R307387
GOF Patch Cord 2.7x5.4 mm, 2xST PC
FeaturesBoth sides fitted with 2xST PC plugMM (OM1), orange
Length OM1 (62.5μm) OM3 (50μm)
1m R30640 R307521
2m R30641 R307522
3m R30642 R307523
5m R30644 R307524
Optical Fibre
Pre-Polished Connectors
Field Terminated
SC
FeaturesSC field-terminated
Description Part Number
OS1 (9μm) blue R305178
OM1 (62.5μm) beige R305180
OM3 (50μm) turquoise R314448
ST
FeaturesST field-terminated
Description Part Number
OS1 (9μm) blue R305181
OM1 (62.5μm) beige R305183
OM3 (50μm) turquoise R314449
LC
FeaturesLC field-terminated
Description Part Number
OS1 (9μm) blue R310561
OM1 (62.5μm) beige R310560
OM3 (50μm) turquoise R314447
••
••
•
•
•
47
Field Terminated (Cont.)
SC-RJ, IP67
FeaturesNut plus strain reliefGasketConnector housing IP67/V06SC-RJ field terminatedIP67 protection cap
Part Number Description Quantity
R314388 50μm 10
R314387 62.5μm 10
Security Systems
Security - Level 1 (Visual Colour Coding)
Visual colour coding supports correct connection of the respective copper cables. The colour coding clips are easily clipped to connection cables and ports (outlets, patch panels). When applications are reassigned within the network, the colour coding elements are simply moved or replaced and no tools needed.
Hinged Dust Cover
Dust cover and colour coding for RJ45 outlets and patch panels. Fits smartholes.
FeaturesHinged dust covers
Description Part Number
Hinged Dust Cover, Anthracite R305685
Hinged Dust Cover, Blue R305686
Hinged Dust Cover, Brown R305687
Hinged Dust Cover, Green R305690
Hinged Dust Cover, Grey R305689
Hinged Dust Cover, Red R305691
Hinged Dust Cover, Violet R305692
Hinged Dust Cover, White R305693
Hinged Dust Cover, Yellow R305688
Colour Coding
Colour coding can be used on R&M’s RJ45 patch cords and consolidation points.
Description Part Number
Colour Coding, Anthracite R302342
Colour Coding, Blue R302343
Colour Coding, Brown R302344
Colour Coding, Green R302348
Colour Coding, Grey R302347
Colour Coding, Red R302349
Colour Coding, Violet R302420
Colour Coding, Yellow R302345
•••••
•
Security - Level 1 (Visual Colour Coding) (Cont.)
Snap-in Coding Clip
Colour coding clip for snap-in adaptors and the multimedia outlet.
FeaturesSnap-in colour coding clip
Description Part Number
Snap-in Coding Clip, Anthracite R302151
Snap-in Coding Clip, Blue R302152
Snap-in Coding Clip, Brown R302153
Snap-in Coding Clip, Green R302154
Snap-in Coding Clip, Red R302155
Snap-in Coding Clip, Violet R302156
Snap-in Coding Clip, White R302157
Snap-in Coding Clip, Yellow R302158
FO Coding Frame for SC-RJ Adapter
Description Part Number
Colour coding frame R310216
Colour Clip
Colour coding for SC-RJ patch cord, fibre guard, coding frame and patch guard.
Description Part Number
Colour Clip, Anthracite R310145
Colour Clip, Blue R310143
Colour Clip, Green R310141
Colour Clip, Orange R310148
Colour Clip, Red R310144
Colour Clip, Turquoise R310146
Colour Clip, Violet R310147
Colour Clip, Yellow R310142
•
48
Security - Level 2Mechanical - Visual Plug-in Protection
Security level 2 (mechanical-visual plug-in protection) The mechanical-visual coding elements provide additional security on a mechanical level. They simply and effectively prevent cables from being pluggedinto the wrong ports. Undefined network states are avoided and sensitive network cards protected from destruction.
Coding “A” for RJ45 connectors
Colour code: blue, red, green, anthracite. Suitable for RJ45 patch cords.
FeaturesCoding elementMiddle elementHousing
Colour Part Number
Anthracite R25432
Coding “A” for RJ45 Jacks
Colour code: blue, red, green, anthracite. Fits smartholes.
FeaturesCoding clipCoding frame
Colour Part Number
Anthracite R25107
Coding “B” for RJ45 Connectors
Colour code: yellow, brown, violet, white. Suitable for RJ45 patch cords.
FeaturesCoding elementMiddle elementHousing
Colour Part Number
White R25677
Coding “B” for RJ45 Jacks
Colour code: yellow, brown, violet, white. Fits smartholes.
FeaturesCoding clipCoding frame
Colour Part Number
White R25676
•••
••
•••
••
Security - Level 3 Mechanical Plug-out / Plug-in Protection
These products introduce future-proof level 3 security to network connections. Only trained and authorized staff can release copper connections. Copper connectors can also be lock-protected for authorized plug-in only.
Plug Guard
RJ45 connection protection for outlets and patch panels.
Description Part Number
Plug Guard, Green R304825
Plug Guard, Red R304826
Plug Guard, White R304827
Jack Guard
RJ45 connection protection for outlets and patch panels. Fits Plug Guard.
FeaturesJack Guard1 key per packing unit
Description Part Number
Jack Guard R307199
FO Fibre Guard for SC-RJ Adapter
SC-RJ connection protection for outlets and patch panels. Fits smartholes.
FeaturesFibre Guard1 key per packing unit
Part Number R310218
FO SC-RJ Adapter Guard
SC-RJ plug-in protection for outlets and patch panels. Fits Fibre Guard.
Description Part Number
Adapter Guard R313816
Key to Plug Guard
Key to suit the R&M Plug Guard.
Description Part Number
Key and Key-ring R304828
Safe Clip
Safe clip is a locking element for R&M standard RJ45 patch cords, protecting connections from being unplugged by mistake.
Description Part Number
Safe Clip (Pack of 20) R304807
••
••
.
49
Security - Level 3 Mechanical Plug-out / Plug-in Protection (Cont.)
Patch Guard for RJ45 Patch Cords
Patch guard is a lockable plug-out protection for R&M standard RJ45 patch cords.
FeaturesPatch Guard, top partPatch Guard, bottom part1 key per pack
Description Part Number
Patch Guard (Pack of 20) R313814
Key to Patch Guard
This patch guard key releases locked RJ45 connectors.
Description Part Number
Patch Guard Key R313815
Micro Splitter
Micro Splitter
The RMS45 assortment
consists of one Micro
splitter and field
mountable plugs for
patch cords. The splitter
insert is zinc casting
alloy and can be simply
plug and play. The
RMS45 is compatible to
most RJ45 jacks and
fits to the R&Mfreenet
LAN Cabling System.
RMS45 supports the
expanded use of RJ45
outlets for TV, telephony, and fast Ethernet requirements.
Pre-terminated cords are available for standard configurations as
well as plugs for custom requirements.
RMS45 Insert Shielded
Matching on all R&Mfreenet RJ45 connection modules Category 5e and Category 6, both in patch panel and in outlets. Make an extension for cable sharing up to four service applications of RMS45 plugs. Tool free assembling.
SuppliedRMS45 Insert Colour-coding (green and yellow) Installation guide
Description Part Number
RMS45 Insert Shielded R319034
RMS45 Plug 1 pair unshielded
Unshielded 1 pair plug. Field mountable, fast and simple termination.
Cable Range:Telephone-Flat Cable 2.5x5mmRound Cable till 3.4mm øWire 2x0.5mmInstallation and patch cord 26-24AWGWire-Isolation maximum 1.1mm ø
Description Part Number
RMS45 Plug 1 pair unshielded R319035
•••
•••
•••••
Micro Splitter (Cont.)
RMS45 Plug 2-Pairs shielded
Shielded 2-Pairs plug. Field mountable, fast and simple termination
FeaturesRound Cable 3.2mm ø - 5.5mm øInstallation and patchcord 26-24AWGWire-Isolation maximum 1.1mm ø
Description Part Number
RMS45 Plug 2-Pairs shielded R319036
RMS45 ColorCoding
Suitable to RMS45 insert and RMS45 plugs 1-Pair and 2-Pairs. Four colorcodings in one Block.
Colour Part Number
Anthracite R319031
Blue R319024
Brown R319025
Green R319028
Grey R319027
Red R319029
Violet R319030
Yellow R319026
Patch cord RMS 1P-RJ45 (4-5)
Patch cord Category 3.
Length Part Number
1m R319041
2m R319042
3m R319043
5m R319044
Patch cord RMS 2P-RJ45/s (1-2,3-6)
Shielded Category 5e patch cord for Fast Ethernet (100 Base-T).
Length Part Number
1m 319049
2m 319050
3m 319051
5m 319052
Patch cord RMS 2P-RJ45/u (1-2,3-6)
Unshielded Category 5e patch cord for Fast Ethernet (100 Base-T).
Length Part Number
1m 319053
2m 319054
3m 319055
5m 319056
Balun-Cable, RMS/s 2P-Coax IEC
The CATV Balun Cable makes the adaptation from Coaxial 75 ohms signals (CATV) and 100 ohms Twisted Pair cables.
Length Part Number
2.5 m 319065
5m 319066
•••
ectors.
50
System Warranty
ONE-OF-A-KIND: R&MFREENET WARRANTY PROGRAM
The R&M warranty program from Reichle & De-Massari provides its end users with comprehensive warranties through certified
R&Mfreenet partners.
R&M THREE-STEP SYSTEM WARRANTY
End users must be assured that their network will still fulfil its purpose in the future. The selection of a cabling system represents a
long-term investment. The individual components must be compatible with future technologies, standards and performance requirements.
The network must function error-free for years. R&M ensures this for the future. In the capacity of a certified R&M partner you can pass on the
warranty in three steps – as a real added value.
5-YEAR PRODUCT WARRANTY
This warranty guarantees that passive R&Mfreenet components are defect-free during this period of time and that they exceed any relevant
cabling standard. Anyone acquiring passive R&Mfreenet components enjoys this protection.
20-YEAR SYSTEM WARRANTY
This warranty covers the entire R&Mfreenet cabling system and protects the end user against component failure and installation problems.
The warranty is accorded if the LAN cabling consists exclusively of passive R&Mfreenet components and if a certified R&Mfreenet installer
(or one through the QPP higher trained entity) carried out the entire installation.
LIFETIME APPLICATION WARRANTY
The condition for this warranty performance is that a certified designer has planned the passive R&Mfreenet cabling system. The warranty
promises that during the lifetime of the system, all protocols supported by industry standards will be functioning. Regardless of what
requirements end users demand – you can trust the R&Mfreenet certified partners. For more information on certified partners, training,
warranty performances and service programs contact Madison Technologies.
51
Section 3
Belden IBDN Solutions
Company Introduction - 52
Copper Cable - 53
Termination Kits - 54
IDC Connectors - 55
Mounting Frames - 55
Connection Modules - 57
Patch Panels - 58
BixPatch Cords - 59
RJ45 Patch Cords - 60
Fibre Cable - 61
Optimax Optical Fibre Connectors - 63
Optical Fibre Splice Trays & Field Breakout Kits - 64
Rack Mount Fibre Enclosures - 64
Fibre Patch Cords & Pigtails - 65
FibreExpress Backbone System - 65
Fibre & Copper Multimedia - 66
Tools & Test Equipment - 67
System Certification & Warranty Program - 67
52
Company Introduction
Belden has been an industry leader in providing reliable cabling products for over a century. Belden creates
specific signal transmission solutions using product lines, technologies and resources.
The Belden brand is built on four pillars:
1- We identify customer needs.
2- We innovate technology solutions to meet those needs.
3- We draw from a very broad product resource set to identify the various products or systems for your individual application.
4- We provide you with local product access and support through our global networks.
Belden’s Solution ProcessBelden’s Solution Process, is a never-ending cycle of bringing more resources and innovation to provide reliable solutions for our customers.
Constant InnovationWe’re continually evolving with state-of- the-art optical fibre, copper and wireless solutions to provide the best signal transmission
performance. We support our core cabling solutions with related products such as Power over Ethernet (PoE) equipment, enclosures, racks,
cable management and more. Belden’s history of innovation continues at a stronger-than-ever pace.
Broad Product Resources Belden has a broader and deeper selection of signal transmission products than anyone else. Collectively, they represent hundreds of
thousands of possible combinations in which that one “right signal solution” for you resides.
Global AvailabilityBelden global distribution centres, networks and strong logistics combine with our worldwide sales and customer service teams, and our vast
dealer and installation resources, to provide the availability and service you need around the world. This local access to Belden products and
support anywhere in the world is unequalled by any other company.
Solutions for Our CustomersCustomer-Centric Design® is more than product development. Our focus on customer needs involves ongoing discussions, identifying
customers’ product or technology needs, staying at the top of our craft and providing continuous support throughout the product life cycle.
As a result, innovation at Belden never rests and service is our priority.
53
Copper Cable
GigaBIX Cross-Connect Wire
GigaBIX Cross-Connect Wire is intended for use between GigaBIX cross-connect fields in a Telecommunications Room or in a Main Cross-Connect Frame. Using GigaBIX Cross-Connect Wire allows for very flexible and cost-effective installations. The cut-to-length jumper eliminates need for slack management and guarantees permanent installation aesthetics. The GigaBIX Cross-Connect Wire offers transmission performance that goes beyond Category 6 providing additional margin to support gigabit applications.
Description Part Number
4 pair, Wh/Bl/Wh/Or/Wh/Gr/Wh/Br, 305 m, Reel
24570521
4 pair, Wh/Bl/Wh/Or/Wh/Gr/Wh/Br, 305 m, Reel-in-Box
24577B15
B-Plus Cross-Connect Wire
B-Plus Cross-Connect Wire is intended primarily for use between incoming cables and station equipment in a Telecommunications Room or at a Main Cross-Connect.
Description Part Number
24 AWG, 1 pair, Wh/Bl, 305 m, K-Carton 22208250
24 AWG, 1 pair, Wh/Bl, 305 m, Reel (S77) 22208253
24 AWG, 2 pair, Wh/Bl/Wh/Or, 305 m, K-Carton 22208260
24 AWG, 2 pair, Wh/Gr/Wh/Or, 305 m, K-Carton 22208231
24 AWG, 3 pair, Wh/Bl/Wh/Or/Wh/Gr, 152 m, K-Carton 22208265
24 AWG, 3 pair, Wh/Bl/Wh/Or/Wh/Gr, 200 m, K-Carton 22208235
24 AWG, 4 pair, Wh/Bl/Wh/Or/Wh/Gr/Wh/Br, 152 m, K-Carton
22208270
Z Cross-Connect Wire
Z Cross-Connect Wire is intended primarily for use in voice applications such as cross-connecting PBX or Key Telephone system equipment to backbone or horizontal distribution cables.
Description Part Number
Z Cross-Connect Wire, 24 AWG, 1 pair, Bl/Ye, 300 m, Reel 22208010
Z Cross-Connect Wire, 24 AWG, 1 pair, Bl/Rd, 300 m, Reel 22208067
10GX
The 10GX cables are 4 pair 23AWG U/UTP cables designed to be used within the Belden IBDN System 10GX. The GX cable incorporates the use of patent-pending SpiralFlex™ technology, which improves the ANEXT coupling by increasing and randomizing the distance between a cable and the neighbouring cables surrounding it. The unmatched Beyond 10G™ performance exceeds all parameters specified in the proposed Augmented Category 6 standard. All performance characteristics including ANEXT, NEXT, FEXT, Insertion Loss and Return Loss have been set to guarantee channel transmission performance up to 625Mhz.
10GX Cable, Bonded Pairs, U/UTP
Description White
4 pair, 23AWG, 305m, Reel 24826395
10GX Cable, Nonbonded Pairs, U/UTP
Description White
4 pair, 23AWG, 305m, Reel 24816395
Enhanced Category 6
MediaTwist Series
MediaTwist® is engineered to exceed the ANSI/TIA/EIA-568-B.2-1 Category 6 requirements. The exceptional physical uniformity of MediaTwist translates into premier electrical performance benefits for users. Available in plenum and non-plenum versions, MediaTwist has taken Bonded-Pair technology a step further. Its unique crescent shape design ensures that pair-to-pair movement is minimized during installation. The innovative design of MediaTwist provides stable crosstalk and impedance performance both before and after installation. This results in improved signal integrity and reduced signal radiation, making MediaTwist an excellent choice for your Category 6 cable.
MediaTwist, CMR, Bonded Pairs, U/UTP
Description White Light Blue
4 pair, 23 AWG, 305 m, Reel 1872A 0091000 1872A 0061000
4 pair, 23 AWG, 305 m, Reel-in-a-Box 1872A 009A1000 1872A 006A1000
Alternative colours, lengths and packaging are available, please contact Customer Service for more details.
54
Category 6
7814A, CMR, Nonbonded Pairs, U/UTP
Belden 7814A cable consists of 4 pair U/UTP cables that exceed Category 6 requirements as per ANSI/EIA/TIA-568B.2-1. The permanent link or channel can be tested for operation at 250 Mhz.
Description Purple
Cable, CMR, Nonbonded Pairs, U/UTP 7814A
GigaFlex 2400 Series
GigaFlex 2400 Cable Series consists of 4 pair U/UTP cables that exceed Category 6 requirements as per ANSI/TIA/EIA-568-B.2-1. When used as the horizontal cable in the Belden IBDN System 2400, the channel provides at least 250 MHz of bandwidth and a data-rate of 2.4 Gb/s.
GigaFlex 2412 Cable, CMR, Nonbonded Pairs, U/UTP
Description White Blue
4 pair, 24 AWG, 305m, Reel-in-Box 24566315 24566915
4 pair, 24 AWG, 30 m, 11-3/4N Reel 24566345 24566945
GigaFlex 2424 Cable, LSZH, Nonbonded Pairs, U/UTP
Description Purple
4 pair, 24 AWG, 305m, 11-3/4N Reel 24568005
Note: Alternative colours, lengths and packaging are available, please contact Customer Service for more details.
Category 5e
GigaFlex 1200 Series
GigaFlex 1200 Cable Series consists of 4 pair U/UTP cables that exceed the Category 5e requirements as per ANSI/TIA/EIA-568-B.2 standard. When used as the horizontal cable in the Belden IBDN System 1200, the channel provides 160 MHz of bandwidth and a data-rate of up to 1.2 Gb/s.
GigaFlex 1212 Cable, CMR, Nonbonded Pairs, U/UTP
Description Blue
4 pair, 24 AWG, Cat 5e, 305m, Box 24570161
Data Twist 5e Series
DataTwist® 5e Cables are easy to install and offer all the performance you need to meet ANSI/TIA/EIA 568-B.2 Category 5e standards. DataTwist 5e Cables are available in plenum and non-plenum versions and several colour and packaging options to ease installation, handling, and identification. Made to the highest quality standards in the industry, DataTwist 5e Cables support all applications that operate using Category 5e standards.
DataTwist 5e, CMR, U/UTP
Description Light Blue White
4 pair, 24 AWG, Cat 5e, 305m, Reel 1583A 0061000 1583A 0091000
4 pair, 24 AWG, Cat 5e, 305m, Box 1583A 006U1000 1583A 009U1000
Note: Alternative colours, lengths and packaging are available, please contact Customer Service for more details.
Category 5e
IBDN Plus 25 Pair Cat5e Series
Available in plenum and non-plenum versions, IBDN Plus 25 pair Cat 5e backbone cables are designed for high-speed applications. These cables meet and exceed the Category 5e transmission characteristics including the Power Sum Near End Crosstalk (NEXT) requirements of ANSI/TIA/EIA-568-B.2 Standard for Commercial Building Telecommunications Wiring.
IBDN Plus Multi-pair, Cat 5e, U/UTP
Description Part Number
Riser, 25 pair, 24 AWG, CMR, Cat 5e, Grey, 305m, 21N Reel 24576125
Alternative colours, lengths and packaging are available, please contact Customer Service for more details.
Category 3
D-Series are multi-pair plenum and riser rated backbone cables that meet and exceed ANSI/TIA/EIA-568-A and CSA T529-95 specifications for Category 3 transmission characteristics.
D-Inside Riser, Multi-pair, 24 Awg, CMR, Category 3, U/UTP
Description Part Number
25 pair, Olive Grey, 305m, Reel 24501858
50 pair, Olive Grey, 305m, Reel 24501877
100-pair, Olive Grey, 480m, Reel 24501897
200-pair, Olive Grey, 275m, Reel 24501906
Termination Kits
GigaBIX Termination Kits
The GigaBIX Termination Kits contain all components required to terminate cables in a GigaBIX Cross-Connect or Interconnect System. The Termination Kits allow for the most cost-effective Category 6 cross-connect or interconnect installations using GigaBIX Cross-Connect Wire or GigaBIX PS6+ Patch Cords. The GigaBIX Mount is designed to accommodate high-performance cables. The GigaBIX Connectors have colour-coded edges, separation marks and a keying feature that prevents connector insertion in the wrong orientation. Each kit also contains Wire Guards, Designation Strips, Designation Labels, Velcro ties and a detailed installation guide.
Description Part Number
GigaBIX Termination Kit, 72 port AX101470
GigaBIX Termination Kit, 300 pair AX101471
GigaBIX Rack Mount Termination Kit, 48 port, NEW AX101985
55
10GX Termination Kits
The 10GX Module is a revolutionary punch down UTP connector designed to be used within the new Belden IBDN System 10GX. Belden has designed the 10GX module based on three revolutionary module technologies making the 10GX Module the most advanced 10G module available. The 10GX termination kits allow for wall mount installation of 10G cabling in 72 port format. The 10GX modules allow for cross-connect operation using 10GX nonbonded cross-connect cable. The unmatched Beyond 10G™ performance exceeds all parameters specified in the proposed Augmented Category 6 standard. All performance characteristics including ANEXT, NEXT, FEXT, Insertion Loss and Return Loss have been set to guarantee channel transmission performance up to 625Mhz.
10GX 72 Port Termination Kits and Accessories
Description Part Number
10GX Termination Kit, 72 port, with Mount
AX102674
10GX Termination Kit, 72 port, without Mount
AX102675
10GX Connecting Block, 4 pair
AX102676
10GX Connecting Block Holder
AX102677
10GX Vertical Cross-connect Manager and
Labeling KitAX102666
10GX Horizontal Cross-connect Cable Manager
AX102667
10GX Cross-connect Cable 4 pair UTP, nonbonded
23370115
IDC Connectors
GigaBIX Connector
The GigaBIX Connector is the core component of the GigaBIX Multi System. Its symmetrical construction allows termination of high-performance cables on one side and GigaBIX Cross-Connect Wires or GigaBIX Patch Cords on the other. Each GigaBIX Connector is equipped with 50 double-ended Insulation Displacement Connection (IDC) clips for terminating plastic insulated solid copper conductors without stripping. The connector is built with two staggered rows of IDC clips enclosed in a three-layer construction of fire-retardant plastic wafers. The GigaBIX Connectors have colour-coded edges, separation marks and a keying feature that prevents connector insertion in the wrong orientation. The GigaBIX Connector offers exceptional performance that goes Beyond Category 6 which makes it the ideal choice for gigabit cabling networks.
Description Part Number
GigaBIX Connector, 6 port AX101447
GigaBIX Connector, 25 pair AX101448
BIX Connector
The BIX Distribution Connector is a 25 pair connector. The connector’s symmetrical construction allows termination of cables on one side and cross-connect jumper wires or BIX Patch Cords on the other. Each BIX connector is equipped with 50 double-ended Insulation Displacement Connection (IDC) clips for terminating plastic insulated solid copper conductors without stripping and pair splitters on each side of the connector to facilitate wire insertion.
Description Part Number
Bix Connector, 5 pair Marking A0266828
Bix Connector, 4 pair Marking A0393146
19” Bix Wire Retainer P0660798
Mounting Frames
GigaBIX Mounting Frames
GigaBIX Mount
The GigaBIX Mount is one of the basic components of the GigaBIX Multi System. The GigaBIX Mount for wall installations holds 12 GigaBIX Connectors and is designed to accommodate up to 144 high-performance cables when used in a top-to-bottom cross-connect layout. The GigaBIX Rack Mount Panel allows for customising rack mount installations for data, voice or multimedia installations. This panel can accommodate up to 8 GigaBIX Connectors, for a total of 48 terminations of 4 pair UTP cables, or up to 4 GigaBIX/MediaFlex Adaptors for a total of 48 multimedia ports.
Description Part Number
GigaBIX Mount, 12 connector
AX101472
GigaBIX Rack Mount Panel,
48 portAX101986
GigaBIX Wire Guard
The GigaBIX Wire Guards are plastic strips that snap behind the GigaBIX Connectors after termination to provide strain relief to the twisted pairs. They come as part of the GigaBIX Termination Kits and can also be ordered separately as replacement components.
Part Number AX101486
GigaBIX Designation Strip
The GigaBIX Designation Strips are plastic strips that snap between the GigaBIX Connectors to apply the designation labels. They come as part of the GigaBIX Termination Kits and can also be ordered separately as replacement components.
Part Number AX101483
BIX Designation Strip
The BIX Designation Strip is designed to be used in conjunction with all BIX Mounts and BIX Connectors. It snaps in between two connectors and provides space for self adhesive BIX labels. The strip is made of white fire-retardant plastic, with ridges on the top and bottom for easy alignment and placement of designation labels.
Part Number A0270169
56
GigaBIX Cable Management Accessories
GigaBIX Coloured Service Clips
The GigaBIX Coloured Service Clip is a single-pair plastic clip that snaps on the GigaBIX connectors to visually identify various services when using GigaBIX Cross-Connect Wire.
Colour Part Number
Almond AX102147
Black AX102149
Blue AX102154
Brown AX102156
Green AX102153
Grey AX102146
Orange AX102150
Purple AX102155
Red AX102151
White AX102148
Yellow AX102152
GigaBIX Cable Management Module
The GigaBIX Cable Management Module is designed to be used with a wall mount solution. The accessory allows all terminated cables to be brought from the same side (top or bottom) in a high-density GigaBIX installation (4 mount stack). The modules are stackable side-to-side and top-to-bottom with alignment features to ease installation. The modules can be used horizontally to create a horizontal management channel for more flexibility in a side-to-side patching layout using GigaBIX Patch Cords.
Part Number AX101469
GigaBIX Patch Cord Organiser
The GigaBIX Patch Cord Organiser is designed to be used with a wall mount solution. The Patch Cord Organiser is a metal trough that interlocks with GigaBIX Mounts to create a vertical management channel for GigaBIX Patch Cords. The Patch Cord Organiser has 6 openings per side to nicely dress the patch cords while clearing the labeling area on the GigaBIX Mount. The Organiser can be assembled over Cable Management Modules in large patch cord installations. A Patch Cord Organiser Cover can be purchased separately to hide the patch cords and give a very professional and high-tech look to the installation.
Description Part Number
GigaBIX Patch Cord Organiser AX101468
GigaBIX Patch Cord Organiser, Cover AX101521
Horizontal Channel Plate
Horizontal Channel Plates are metal plates that attach to the Patch Cord Organisers to create a horizontal management channel for GigaBIX Patch Cords. The plates are used in pairs and are designed to keep patch cords inside the horizontal channel.
Part Number AX101520
GigaBIX Cable Management Accessories (Cont.)
GigaBIX Management Ring
The GigaBIX Management Ring is a plastic ring that interlocks with the GigaBIX Mounts to create a high-density wall mount cross-connect system. The rings are assembled in systems when using cross-connect wire and have a capacity of 450 GigaBIX Cross-Connect Wires (1800 pairs total).
Part Number AX101478
BIX Wire Management Accessories
Distribution Ring
The Distribution Ring is used in wall mount installations providing a cross-connect channel for jumper wires, patch cords and cables. The Distribution Ring interlocks with the QMBIX12E or QMBIX10A mounts, providing proper spacing and alignment.
Part Number A0270168
BIX Mount
250 & 300 Pair
BIX Mounts are basic components used in building a cross-connect system. They can accept BIX Distribution, Multiplying or Modular Jack Connectors. The 300 and 250 pair mounts can be wall-mounted or installed on BIX Frames. These mounts feature an interlocking design allowing them to be stacked for larger cross-connect installations.
Description Part Number
QMBIX12E (300 pair) A0340836
QMBIX10A (250 pair) A0270164
19” Bix Mount Brackets A0352331
50 Pair
The BIX 50 pair Mount is typically used in small cross-connect installations. Also available is a 50 pair mount with cover that is sold as an assembly and is typically used in small cross-connect installations where security and/or dust protection is required.
Mount with Locking Cover Mount
Description Part Number
BIX Mount, 50 pair A0284798
BIX Mount with Locking Cover, 50 pair A0277853
BIX Mount with Snap-on Cover, 50 pair A0277854
57
BIX Mount (Cont.)
BIX Cover
BIX Covers can be used to restrict access of cross-connect installations for better protection and security. Two sizes are available, to suit either the QMBIX12E 300 pair mount or the QMBIX10A 250 pair mount. The two locking covers used in wall or frame-mounted installations are moulded with translucent plastic allowing visual inspection. Also available are two covers used exclusively in stand-alone QMBIX10A 250 pair mount installations; one locking, the other non-locking, both have four cable entries, one at each corner.
Description Part Number
BIX Locking Cover,for QMBIX12E (300 pair)
A0340838
BIX Locking Cover, for QMBIX10A (250 pair)
A0285986
BIX Cover, QMBIX10A, Stand-alone Installation, locking
A0276396
BIX Cover, QMBIX10A, Stand-alone Installation,
non-locking
A0276394
LabelFlex Automated Labeling Solution
The LabelFlex solution is aimed at simplifying network management. Using the labeling system (software and label types), the installer can rapidly produce quality, application specific labels for the BIX and GigaBIX Belden IBDN products in a fraction of the time taken by traditional methods.
Labels for BIX and Gigabix
Includes 15 labels/sheet, 5 sheets/pack
Colour Part Number
Blue AX101538
Brown AX101540
Green AX101537
Grey AX101532
Orange AX101534
Purple AX101539
Red AX101535
Silver AX101541
White AX101533
Yellow AX101536
Labels for Flex, HD and GigaFlex PS6+
Labels to suit Colour Includes Part Number
Flex Patch Panels White 28 labels/sheet, 5 sheets/pack AX101551
HD Patch Panels White 18 labels/sheet, 5 sheets/pack AX101554
GigaFlex PS6+ Patch Panels White 28 labels/sheet, 5 sheets/pack AX101626
Software
Automated Labelling Software, 1 CD/pack
Part Number AX101569
Connection Modules
10GX Modules
The 10GX Module is a revolutionary punch down UTP connector designed to be used within the new Belden IBDN System 10GX. Belden has designed the 10GX module based on three revolutionary module technologies making the 10GX Module the most advanced 10G module available. It is designed to work in existing hardware including the Flex Modular Patch Panel and MediaFlex Outlet Series. It can also be mixed and matched with a wide variety of adaptors and boxes to suit practically any installation configuration for workstation outlet, consolidation point and telecommunications closet applications. The unmatched Beyond 10G™ performance exceeds all parameters specified in the proposed Augmented Category 6 standard. All performance characteristics including ANEXT, NEXT, FEXT, Insertion Loss and Return Loss have been set to guarantee channel transmission performance up to 625Mhz.
Colour MDVO-Style
White AX102271
Black AX102272
Blue AX102277
Green AX102276
Red AX102274
Yellow AX102275
Category 6 Modules
GigaFlex PS6+ Module
The GigaFlex PS6+ Module is a punch down UTP connector based on a patented Encapsulated Lead Frame technology ensuring excellent long-term reliability as well as extremely stable transmission performance. The unmatched Beyond Category 6 performance exceeds all parameters specified in the Category 6 standard. All performance characteristics have been set to guarantee transmission performance up to 300 MHz and a data-rate of up to 4.8 Gb/s.
Colour Clipsal-Style
White AX101342
Black AX101343
Blue AX101348
Green AX101347
Red AX101345
Yellow AX101346
Category 5e Modules
EZ-MDVO PS5E Modules
The EZ-MDVO Module is built with a patented lead frame design and encapsulated insulation displacement contacts, ensuring reliable connections and performance well above Category 5e standards. The EZ-MDVO module termination cap is what is so unique about this product. It allows for a simple and fast “press-fit” installation while ensuring consistent wire termination every time it is snap-locked. The module termination cap is colour-coded to facilitate wire arrangement and speed up installation time. The termination cap is printed with the T568A/B colour-codes. The EZ-MDVO Modules can be mixed and matched with a wide variety of MediaFlex, Interface and MDVO-style faceplates, adaptors and boxes to suit practically any installation configuration for workstation outlet installations.
Colour Clipsal-Style
White AX100680
Black AX100681
Blue AX100686
Green AX100685
Red AX100683
Yellow AX100684
Bix Cover - Stand-alone
Locking Cover
58
Category 5e Modules (Cont.)
GigaFlex PS5E Module
The GigaFlex PS5E Module is a punch down UTP connector based on a patented Encapsulated Lead Frame technology ensuring excellent long term reliability as well as extremely stable transmission performance. The PS5E-rated performance exceeds all requirements specified in the Category 5e standard. All performance parameters including NEXT, FEXT, Attenuation and Return Loss have been set to guarantee transmission performance up to 160 MHz and a data-rate of up to 1.2 Gb/s. The GigaFlex PS5E is the module of choice for terminating UTP cables into the MediaFlex and Interface Outlet Series. It can also be mixed and matched with a wide variety of MDVO adaptors, boxes and patch panels to suit practically any installation configuration for workstation outlet, consolidation point and telecommunications room applications.
Colour MDVO-Style
White AX101046
Black AX101047
MDVO Adaptors
All MDVO Adaptors are compatible with GigaFlex, EZ-MDVO and MDVO Multimedia Modules. The MDVO Side Entry Box can be easily mounted directly on the wall, as well as on modular furniture panels, baseboards and utility poles. The compact size of the box allows secure installation in confined areas such as behind a desk or underneath a workstation.
Description Part Number
2 port, White A0645273
MDVO Faceplates
MDVO Faceplates flush combine ease of use and aesthetics in work area installations. The single gang faceplates are available in 1 port and 8 port configurations, Double gang faceplates are configured for 12 ports. The Single gang faceplates can fit over the Interface Surface Adapter Boxes for surface mount installations.
MDVO faceplates are suitable for use with EZ-MDVO and MDVO Multimedia Modules.
Colour 1 port 2 port 4 port
Almond A0405256 AX101432 AX101436
Black A0405258 AX101434 AX101438
Grey A0405255 AX101431 AX101435
Ivory AX102585 AX102582 AX102583
White A0405257 AX101433 AX101437
Patch Panels
10GX Patch Panel
The 10GX Patch Panel is a fully loaded patch panel designed to be used within the Belden IBDN System 10GX. The 10GX Patch Panel features the revolutionary 10GX Module, specifically designed to meet the difficult challenges of 10 Gb/s transmission. 10GX Patch Panels are available in high-density options such as 24 ports in 1U or 48 ports in 2U, but the phenomenal ANEXT performance of the 10GX Module has allowed Belden to also support an ultra high-density option offering the 10GX Ultra High-Density Patch Panel supporting 48 ports in 1U. The unmatched Beyond 10G™ performance exceeds all parameters specified in the proposed Augmented Category 6 standard. All performance characteristics including ANEXT, NEXT, FEXT, Insertion Loss and Return Loss have been set to guarantee transmission performance up to 625 MHz.
10GX Ultra High-Density Patch Panel, Augmented Category 6
Description Part Number
1U, 48 port, Titanium AX102488
10GX Patch Panel, Augmented Category 6
Description Part Number
1U, 24 port, Titanium AX102293
2U, 48 port, Titanium AX102296
Category 6
GigaFlex PS6+
The GigaFlex PS6+ Patch Panel is a fully loaded patch panel using black GigaFlex PS6+ Modules. The unmatched performance of the GigaFlex PS6+ Module exceeds all parameters specified in the Category 6 standard. All performance characteristics including NEXT, FEXT, Attenuation and Return Loss have been set to guarantee transmission performance up to 300 MHz and a data-rate of up to 4.8 Gb/s.
Description Grey Black
GigaFlex PS6+ Patch Panel, 1U, 24 port AX101612 AX101611
GigaFlex PS6+ Patch Panel, 2U, 48 port AX101614 AX101613
59
PS5E HD Patch Panels Category 5e
PS5E HD Patch Panel
The Universal PS5E HD Patch Panels Series includes a variety of product styles, sizes and wiring configurations. PS5E HD Patch Panels are robust and installer-friendly products by design, combining punch down connectors with standard modular jacks. A colour-coded icon labeling system can be used to tag each patch panel port and simplify network management (ordered separately). PS5E HD Patch Panels offer Category 5e performance.
Description Black
PS5E HD-110 Patch Panel, 1U, 24 port, T568B/A AX100452
PS5E HD-110 Patch Panel, 2U, 48 port, T568B/A AX100454
Flex Patch Panel
Flex Patch Panels provide a flexible and versatile termination solution for telecommunications room rack-mounted installations. The panel can be custom configured in the field to suit practically any particular configuration. Flex Patch Panels are compatible with GigaFlex and EZ-MDVO modules as well as MDVO-style Multimedia modules. Modules are ordered separately.
Description Part Number
Flex Patch Panel, 1U, 24 port, Black AX101456
PS5E HD Patch Box
The PS5E HD Patch Box is available in 110 configurations and hold one 12 port universal connector module in a compact and robust metal enclosure. The patch box features a hinged cover and support brackets to secure cables and maintain patch cord bend radius. A colour-coded icon labeling system can be used to tag each patch panel port and simplify network management (ordered separately). All performance parameters, including NEXT, Attenuation and Return Loss are designed to meet the Category 5e cabling standard.
Description Part Number
PS5E HD-110 Patch Box, 12 port, Black, T568B/A
AX100491
MDVO Patch Box
An MDVO Patch Box is also available that can be custom configured in the field using up to 12 GigaFlex, EZ-MDVO or MDVO Multimedia Modules.
Description Part Number
MDVO Patch Box, 12 port, Black
AX100282
BIX Patch Cords
Patch Cords
GigaBIX Patch Cords allow for high-density connections, coupled with flexibility for cost-effective installation and administration. Plug-and-go installation and rearrangement of patch cords do not require any special tools or training. GigaBIX Patch Cords are available in two different configurations; BIX-BIX patch cord configurations for easy cross-connection between equipment and distribution fields, and BIX-8MOD patch cord configurations to easily interconnect equipment utilizing 8-position modular jacks directly into GigaBIX Connectors in the distribution field.
GigaBix PS6+ Patch Cords
The GigaBIX PS6+ Patch Cords are 4 pair 23 AWG UTP cords. They are used in the GigaBIX Multi System as part of a Belden IBDN System 2400 and System 4800LX, providing a channel bandwidth of 250 MHz and 300 MHz respectively.
BIX-BIX BIX-8MOD
Type 1.2m (4ft) 1.8m (6ft) 2.4m (8ft) 3.0m (10ft) 4.6m (15ft) 7.6m (25ft)
BIX-BIX AX101945 AX101946 AX101947 AX101948 AX101949 AX101950
BIX-8MOD T568A-ISDN
AX101951 AX101952 AX101953 AX101954 AX101955 AX101956
BIX-8MOD T568B-ALT
AX101957 AX101958 AX101959 AX101960 AX101961 AX101962
GigaBIX PS5E Patch Cords
The GigaBIX PS5E Patch Cords are used in the GigaBIX Multi System as part of a Belden IBDN System 1200, providing outstanding channel bandwidth of 160 MHz.
BIX-BIX BIX-8MOD
Type 1.2m (4ft) 1.8m (6ft) 2.4m (8ft) 3.0m (10ft) 4.6m (15ft) 7.6m (25ft)
BIX-BIX AX101963 AX101964 AX101965 AX101966 AX101967 AX101968
BIX-8MOD T568A-ISDN
AX101969 AX101970 AX101971 AX101972 AX101973 AX101974
BIX-8MOD T568B-ALT
AX101975 AX101976 AX101977 AX101978 AX101979 AX101980
ion and
60
BIX Patch Cord
BIX Patch Cords allow for high-density connections, coupled with flexibility for cost-effective installation and administration. Installation and rearrangement of patch cords do not require any special tools or training. BIX Patch Cord plugs terminate directly into QCBIX1A/1A4 connectors.
Description 1.2m (4ft) 2.1m (7ft) 3.0m (10ft) 4.6m (15ft) 7.6m (25ft)
1 pair A0410469 A0410471 A0410473 A0410475 A0410493
2 pair A0410494 A0410495 A0410496 A0410497 -
Note: For 4 pair connections, please see the GigaBIX Patch Cord section.
RJ45 Patch Cords
10GX Modular Cords
The 10GX Modular Cords are 4 pair 23AWG U/UTP modular cords designed to be used within the Belden IBDN System 10GX. Belden has designed the 10GX Modular Cord based on a patent-pending management bar design which allows for very good control of the internal plug NEXT. The patch cable design offers very good Alien crosstalk performance, while maintaining the important mechanical characteristics such as flexibility. The 10GX Modular Cords’ design, with a very small footprint, makes them fully compatible with the highest density network hardware that utilize RJ45 jack connections. Open ended cords are available for applications such as equipment cabling and consolidation point cabling. The unmatched performance exceeds all parameters specified in the proposed Augmented Category 6 standard. All performance characteristics have been set to guarantee transmission performance up to 625Mhz.
10GX Modular Cord, CMR (T568A/B – T568A/B)
Colour 2.1m (7ft) 3.0m (10ft) 4.6m (15ft) 7.6m (25ft)
Blue AX360015 AX360016 AX360017 AX360018
Green AX360021 AX360022 AX360023 AX360024
Grey AX360027 AX360028 AX360029 AX360030
Red AX360045 AX360046 AX360047 AX360048
White AX360051 AX360052 AX360053 AX360054
Yellow AX360057 AX360058 AX360059 AX360060
10GX Modular Cord, CMR (T568A – open)
Colour 4.6m (15ft) 7.6m (25ft) 10.6m (35ft) 15.0m (50ft)
Grey AX360265 AX360266 AX360267 AX360268
Enhanced Category 6 Modular Cords
GigaFlex PS6+ Modular Cord
The GigaFlex PS6+ Modular Cords are 4 pair 23 AWG U/UTP modular cords designed for use with the Belden IBDN Systems 2400 and 4800LX, providing channel bandwidths of 250 MHz and 300 MHz, respectively. The GigaFlex PS6+ Modular Cords have been designed to provide a mated-connection performance that exceeds the Category 6 requirements. The GigaFlex PS6+ Modular Cord’s patented design, with a very small footprint, makes them fully compatible with any of the highest density hubs with RJ45 jack connections.
GigaFlex PS6+ Modular Cord, CMR (T568A/B-T568A/B)
Colour0.5m
(1.6 ft.)1.0m
(3.3 ft.)2.0m
(6.6 ft.)3.0m
(10 ft.)5.0m
(16.4 ft.)10.0m (33 ft.)
Blue AX350037 AX350038 AX350039 AX350040 AX350041 AX350042
White AX350043 AX350044 AX350045 AX350046 AX350047 AX350048
Green AX350055 AX350056 AX350057 AX350058 AX350059 AX350060
Grey AX350049 AX350050 AX350051 AX350052 AX350053 AX350054
Red AX350061 AX350062 AX350063 AX350064 AX350065 AX350066
Yellow AX350067 AX350068 AX350069 AX350070 AX350071 AX350072
GigaFlex PS6+ Modular Cord, CMR (T568A/B-open)
Colour 4.6m (15ft) 7.6m (25ft) 10.6m (35ft) 15.0m (50ft)
Grey AX350160 AX350161 AX350162 AX350163
Category 5e Modular Cords
GigaFlex PS5E Modular Cord
The GigaFlex PS5E Modular Cords are 4 pair 24 AWG UTP modular cords that are designed for use with the Belden IBDN Plus Cabling System and the Belden IBDN System 1200 providing channel bandwidths of 100 MHz and 160 MHz, respectively. The GigaFlex PS5E Modular Cord’s patented design features a very small footprint, making them fully compatible with the highest density hubs which use RJ45 jack connections. The GigaFlex PS5E Modular Cords have been designed to provide a mated-connection performance that exceeds the Category 5e standard.
GigaFlex PS5E Modular Cord, CMR (T568A/B-T68A/B)
Colour 0.6m (2ft) 1.2m (4ft) 2.1m (7ft) 3.0m (10ft) 4.6m (15ft) 7.6m (25ft)
Blue AX350001 AX350002 AX350003 AX350004 AX350005 AX350006
White AX350007 AX350008 AX350009 AX350010 AX350011 AX350012
Green AX350019 AX350020 AX350021 AX350022 AX350023 AX350024
Grey AX350013 AX350014 AX350015 AX350016 AX350017 AX350018
Red AX350025 AX350026 AX350027 AX350028 AX350029 AX350030
Yellow AX350031 AX350032 AX350033 AX350034 AX350035 AX350036
GigaFlex PS5E Modular Cord, CMR (T568A/B – open)
Colour 4.6m (15ft) 7.6m (25ft)
Grey AX350149 AX350093
61
Fibre Cable
Today’s advanced networks are diverse and varied and almost always complex. The right way ahead is to future-proof these networks and take
precautions to protect them against anything that will create problems, damage or disrupt. That means matching the right hardware with the
right cabling to guarantee performance – and that means choosing optical fibre cable. This type of cable has become essential for bringing
light-speed communication to hospitals, corporate campuses, educational facilities and other projects.
Part Number Coding
1 2 Product 3 Type 4 Construction 5 Quality 6 Fibre Count (mm) 7 Fibre Count
G A Messenger figure 8 A Aramid A CLT T12 [1x12] 1 62.5/125-OM1 A Simplex Duplex 1.6 mm
B Outdoor Dry MLT B Breakout B CLT T24 [1x24] 2 50/125-OM2 B Simplex Duplex 1.8 mm
C Universal Dry MLT C CST Single sheath C MLT T48 [6x8] (helical) 3 50/125-OM3 C Simplex Duplex 2.0 mm
D Outdoor Filled MLT D CST Double Sheath D MLT T72 [6x12] 4 50/125-OM2e D Simplex Duplex 2.4 mm
E Universal Filled MLT F FRP E MLT T96 [8x12] 5 50/125-OM2 E Simplex Duplex 2.8 mm
I Indoor L AL/PE Sheath F MLT T144 [12x12] 6 50/125-OM3+ F Simplex Duplex 3.0 mm
M Mobile M Mini-Breakout G MLT T36 [6x6] 7 9/125-G655 0-9 Part of Fibrecount 0-9 Part of Fibrecount
O Outdoor Dry O Pigtail H MLT T24 [6x4] 8 9/125-G652D
U Universal Dry P Patchcord I MLT T192 [8x24] 9 9/125-G652B
R Improved RP J MLT T288 [12x24] 0 No Fibre, APF
S Standard RP K Semi-Tight (dry)
X Mini-BO+RP L MLT T432 [18x24]
W SWA M MLT T216 [18x12]
S Semi-Tight (Jelly-Filled)
T Tight
RP = Rodent Protection SWA = Galvanised Steel Wire Armor CST = Corrugated Steel Tape FRP = Fibre Reinforced Plastic Armor
To specify Part Number
1. Example: GIBT412
1 2 3 4 5 6 7
G I B T 4 1 2
Fibre Indoor Breakout Tight Buffer 50/125-OM2e 12
2. Example: GDDF744
1 2 3 4 5 6 7
G D D F 7 4 4
Fibre MLT Outdoor Filled SZ CST Double Sheath MLT144 (12 x 12) 9/125-G655 144
Optical Characteristics
Characteristics (Cabled) Single-Mode – Matched-Cladded Optical Fibres according to ITU-G.652
EuropeanPart Number
Coding (position 5)
Fibre-Type Mode-FieldDiameter/Cladding
Diameter (μm)
Wavelength(nm)
Dispersion(ps/(nm•km))
PMD(ps/Ãkm)
Cable Cut-offWavelength
(nm)
RefractiveIndex
Attenuation
Loose Tube Cablesaverage/maximum
(dB/km)
(Semi-) Tightaverage/maximum
(dB/km)
8 9/125-OS1 ITU-G.652D
9.2 ± 0.4 125 ± 0.7
1310 1550
≤ 3.5 ≤ 18 ≤ 0.2 ≤ 1260
1.467 1.467
0.32/0.40.21/0.3
0.35/0.5 0.21/0.3
Characteristics (Cabled) Single-Mode – Matched-Cladded Optical Fibres According to ITU-G.655
EuropeanPart Number
Coding (position 5)
Fibre-Type Mode-FieldDiameter/Cladding
Diameter (μm)
Wavelength(nm)
Dispersion(ps/(nm•km))
PMD(ps/Ãkm)
Cable Cut-offWavelength
(nm)
RefractiveIndex
Attenuation
Loose Tube Cablesaverage/maximum
(dB/km)
(Semi-) Tightaverage/maximum
(dB/km)
7 9/125 8.4 ± 0.6/125 ± 1 1550 3.5 - 8.5 ≤ 0.1A ≤ 1260 1.470 0.25/0.3 0.25/0.28
Note A: Link design value
62
Optical Characteristics (Cont.)
Characteristics (Cabled) Multimode – Graded-Index Optical Fibres According to IEC 60793
European Part NumberCoding (position 5)
Fibre-Type Core/CladdingDiameter (μm)
Wavelength(nm)
Bandwidth(MHz•km)
Ethernet Performance(m)
NumericalAperture (μm)
RefractiveIndex
Attenuation
1GbE 10GbE Loose Tube Cables average/maximum
(dB/km)
(Semi-) Tightaverage/maximum
(dB/km)
1 62.5/125 OM1
62.5 ± 2.5 125 ± 1
850 1300
≤ 200≤ 600
275 550
33 N.A.
0.275 ± 0.015 1.495 1.490
2.7/3.2 0.6/1.1
3.0/3.2 0.7/0.9
5 50.0/125 OM2
50.0 ± 2.5 125 ± 1
850 1300
≤ 500 ≤ 500
600 600
82 N.A.
0.200 ± 0.015 1.481 1.476
2.4/3.0 0.7/1.0
2.6/2.8 0.6/0.9
2 50.0/125 OM2
50.0 ± 2.5 125 ± 1
850 1300
≤ 600 ≤ 1200
600 600
82 N.A.
0.200 ± 0.015 1.481 1.476
2.3/2.8 0.6/0.9
2.6/2.8 0.6/0.9
4 50.0/125 OM2e
50.0 ± 2.5 125 ± 1
850 1300
≤ 600 ≤ 1200
750 2000
110 N.A.
0.200 ± 0.015 1.481 1.476
2.3/2.8 0.6/0.9
2.6/2.8 0.6/0.9
3 50.0/125 OM3
50.0 ± 2.5 125 ± 1
850 1300
≤ 1500 ≤ 500
900 550
300 N.A.
0.200 ± 0.015 1.482 1.477
2.5/3.0 0.5/1.0
2.6/2.8 0.6/0.9
6 50.0/125 OM3+
50.0 ± 2.5 125 ± 1
850 1300
≤ 3500 ≤ 500
900 550
550 N.A.
0.200 ± 0.015 1.482 1.477
2.5/3.0 0.5/1.0
2.6/2.8 0.6/0.9
Cable Finder Guide Optical Fibres
Intex, Indoor and Mobile Cables with Semi- Tight-Buffered Optical Fibres
Mini-Breakout Cables (Distribution)
Part Number Description Buffer Construction Remarks Cladding Size μm Application
GIMT 2-24 Fibres Tight Dry FRNC/LSZH 280 Indoor
GUMT 4-24 Fibres Tight Dry FRNC/LSZH 280 In/Outdoor
GUXT 4-24 Fibres Tight Dry FRNC/LSZH, Improved Rodent Protection 280 In/Outdoor
GMMT 4-8 Fibres Tight Dry Intex Mobile, PUR 280 In/Outdoor
Universal and Outdoor Cables with Loose Tubes
Central Loose Tube Cables (CLT)
Part Number Description Buffer Construction Remarks Cladding Size μm Application
GOSA 2-12 Fibres – Dry PE, Standard Rodent Protection 250 Outdoor
GOSB 24 Fibres – Dry PE, Standard Rodent Protection 250 Outdoor
GOFB 2-24 Fibres – Dry PE, Full Rodent Protection, Armored (FRP) 250 Outdoor
GOWB 2-24 Fibres – Dry Double PE, Full Rodent Protection, Armored (SWA) 250 Outdoor
GOCB 2-24 Fibres – Dry PE, Full Rodent Protection, Armored (CST) 250 Outdoor
GUSA 2-12 Fibres – Dry FRNC/LSZH, Standard Rodent Protection 250 In/Outdoor
GUSB 2-24 Fibres – Dry FRNC/LSZH, Standard Rodent Protection 250 In/Outdoor
GUCB 2-24 Fibres – Dry FRNC/LSZH, Full Rodent Protection, Armored (CST) 250 In/Outdoor
Multi Loose Tube Cables (MLT)
Part Number Description Buffer Construction Remarks Cladding Size μm Application
GDA 36-432 Fibres – Filled HDPE 250 Outdoor
GDR 36-432 Fibres – Filled HDPE, Improved Rodent Protection 250 Outdoor
GDD 36-432 Fibres – Filled HDPE, Full Rodent Protection, Armored (CST) 250 Outdoor
GDW 36-432 Fibres – Filled HDPE, Full Rodent Protection, Armored (SWA) 250 Outdoor
GEA 36-432 Fibres – Filled LSZH 250 In/Outdoor
GER 36-432 Fibres – Filled LSZH, Improved Rodent Protection 250 In/Outdoor
GED 36-432 Fibres – Filled LSZH, Full Rodent Protection, Armored (CST) 250 In/Outdoor
GEW 36-432 Fibres – Filled LSZH, Full Rodent Protection, Armored (SWA) 250 In/Outdoor
63
Optimax Optical Fibre
Connectors
Field Installable Connector
The Optimax Connectors are reliable field installable optical fibre connectors that are easy to install. They do not require epoxy, curing or polishing. Their unique design incorporates a factory polished fibre stub in a splice mechanism which provides a fast, secure, and reliable termination on optical fibre cables.
All critical steps are performed in the factory, ensuring a superior-quality connection every time. Only simple tools are required for installation, making Optimax a cost effective field termination. Optimax Connectors are high-quality LC, SC and ST compatible connectors that use a ceramic ferrule with a physical contact (PC) polish for Multimode and super physical contact (SPC) polish for Singlemode that ensures the best possible mating of optical fibres. Connectors are available for 62.5 or 50/125 μm Multimode fibre and Singlemode fibre installations.
LC Connector
SC Connector
ST Compatible Connector
Description Part Number
LC 62.5 μm, Multimode, for 900 μm buffered fibre only AX101981
LC 50 μm, Multimode, for 900 μm buffered fibre only AX101982
LC, Singlemode, for 900 μm buffered fibre only AX101983
SC 62.5 μm, Multimode, for 900 μm buffered fibre only AX100029
SC 50 μm, Multimode, for 900 μm buffered fibre only AX101077
SC, Singlemode, for 900 μm buffered fibre only AX101792
ST Compatible 62.5 μm, Multimode, for 900 μm buffered fibre only A0408835
ST Compatible 50 μm, Multimode, for 900 μm buffered fibre only AX101075
ST Compatible, Singlemode, for 900 μm buffered fibre only AX101791
LC Accessory Kit for jacketed fibre, contains a 2 mm boot and a crimp sleeve AX101984
SC Accessory Kit for jacketed fibre, contains 3 mm boot, crimp sleeves and a cord adapter
AX101794
ST Accessory Kit for jacketed fibre, contains 3 mm boot, crimp sleeves AX101793
Field Installable Connector (Cont.)
Tool Kit
The Optimax Tool Kit is packaged in a small convenient carrying case and includes an LC, SC and ST compatible installation and training video (CD), installation instructions and all the tools required to terminate 900 μm buffered optical fibre and jacketed optical fibre.
The Optimax installation kit has all the tools and supplies required to install the Optimax LC, SC or ST compatible Multimode and Singlemode connectors. Certain tool kit items can be purchased separately to accommodate installers already possessing basic optical fibre installation tools.
Description Part Number
LC/SC/ST Compatible (includes installation tools, fibre cleaver, crimping tool, instruction manual, microscope, tweezers, alcohol wipes, marker, scissors, waste
bottle, fibre stripper, cable stripper and Training Video)
AX100947
Optimax Tool Kit, Basic (excludes fibre stripper & cleaver) AX100949
Optimax LC Tool Kit Upgrade (includes LC installation tool, instruction manual, foam for the case)
AX102061
Individual Components
Description Part Number
Fibre Cleaver A0408829
Installation Tool LC (does not include tool-clamp) AX102062
Installation Tools ST Compatible and SC (includes tool-clamp) A0403634
Microscope AX100910
Refurbishing Materials (includes 80 alcohol wipes and a black felt tip marker) AX100951
Installation Instruction Manual, LC AX102063
Installation Instruction Manual, SC PX101318
Installation Instruction Manual, ST Compatible PX101317
Installation & Training Video, CD NOT0580
Crimp Tool complete with die A0403641
Epoxy Field Installable Connectors
Epoxy Field Installable Connectors are available as Multimode and Singlemode ST compatible and SC field installable connectors. They require heat-cured epoxy and polishing. Both types have a ceramic ferrule. Each connector comes complete with all the parts necessary for termination of tight buffered fibres as well as jacketed fibres. Parts include crimp sleeves, boots, cord adapter and dust cap.
SC Connector
ST Compatible Connector
Description Part Number
Epoxy Field Installable Connector, Multimode, ST Compatible A0390851
Epoxy Field Installable Connector, Multimode, SC Simplex AX100919
Epoxy Field Installable Connector, Multimode, SC Duplex AX100929
Epoxy Field Installable Connector, Singlemode, ST Compatible AX101412
Epoxy Field Installable Connector, Singlemode, SC Simplex AX101411
64
Optical Fibre Splice Trays
and Field Breakout Kits
Splice Organiser Kit & Breakout Kits
Optical Fibre Field Breakout Kit
The Field Breakout Kit is designed to attach to one tube of a loose-tube cable. Each kit has either six or twelve 900 μm tubes that hold each of the coated fibres. For each end of the cable, one kit is needed for every tube. For example, a 12-fibre 62.5 μm cable contains two 6-fibre tubes. This cable would require four kits, two for each end.
Description Part Number
Optical Fibre Field Breakout Kit, 6 fibres, 1/pack AX101100
Optical Fibre Field Breakout Kit, 12 fibres, 1/pack AX101101
Optical Fibre Splice Organiser Kits
Optical Fibre Splice Organiser Kits provide the accessories necessary for installing the FibreExpress Fibre Patch Panels, as well as other fibre terminals that accommodate the standard Optical Fibre Organiser Tray.
Description Part Number
Optical Fibre Splice Organiser Kit, Splice kit, tray, 203mm (8 in.) A0649869
Optical Fibre Splice Organiser Kit, Splice kit, tray, 305mm (12 in.) A0318904
Optical Fibre Splice Tray, Fusion, 203mm (8 in.) A0335015
Optical Fibre Splice Tray, Fusion, 305mm (12 in.) A0316446
Optical Fibre Splice Tray, Universal (mechanical or fusion), 203mm (8 in.) AX100079
Optical Fibre Splice Tray, Universal (mechanical or fusion), 305mm (12 in.) A0394328
Optical Fibre Splice Tray, Tray cover, 203mm (8 in.) A0394331
Optical Fibre Splice Tray, Tray cover, 305mm (12 in.) A0394330
Rack Mount Fibre
Enclosures
Rack Mount Patch Panels 1U & 2U
FibreExpress Rack Mount Patch Panel 1U
The FibreExpress 1U Rack Mount Patch Panels are equipped with a special hinge that allow easy access to the rear of the patch panel without disturbing the optical fibre cable. A specially designed front panel allows connector protection and easy routing of optical fibre patch cords. The FibreExpress Rack Mount Patch Panels are also compatible with our 203mm Splice Organiser Trays. This allows for choice of direct connector termination or the installation of optical fibre pigtails. The 1U FibreExpress Rack Mount Patch Panel can accept up to 2 adaptor strips for a capacity of up to 48 fibres using high density LC adaptors. An optional smoked plexiglass front cover and side cable entry bracket are also available.
Description Part Number
FibreExpress Rack Mount 1U, Black AX100041
Front Cover, Smoked Plexiglass, 1U AX100045
Right Side Cable Entry Bracket, 1U AX100047
Rack Mount Patch Panels 1U & 2U (Cont.)
FibreExpress Rack Mount Patch Panel 2U
The FibreExpress 2U Rack Mount Patch Panel offers a high fibre capacity, 96 if using high capacity LC adaptor strips. The FibreExpress 2U Rack Mount Patch Panel comes equipped with a smoked plexiglass front cover that protects fibre connections while allowing for quick visual inspection. The 2U can accept up to 4 adaptor strips.
Description Part Number
FibreExpress Rack Mount 2U, Black
AX100068
FibreExpress Rack Mount Patch Panel 3U
The FibreExpress 3U Rack Mount Patch Panel features a sliding drawer for easy access to the rear of the panel. The FibreExpress Rack Mount Patch Panels are also compatible with our 203mm Splice Organiser Trays. This allows for choice of direct connector termination or the installation of optical fibre pigtails. The 3U FibreExpress Rack Mount Patch Panel can accept up to 4 adaptor strips for a capacity of up to 96 fibres using high density LC adaptors.
Description Part Number
FibreExpress Rack Mount 3U, Black
AX100077
FibreExpress Rack Mount Patch Panel 4U
The FibreExpress 4U Rack Mount Patch Panel features a hinged drawer for easy access to the rear of the panel. The FibreExpress Rack Mount Patch Panels are also compatible with our 203mm Splice Organiser Trays. This allows for choice of direct connector termination or the installation of optical fibre pigtails. The 4U FibreExpress Rack Mount Patch Panel can accept up to 8 adaptor strips for a capacity of up to 192 fibres using high density LC adaptors.
Description Part Number
FibreExpress Rack Mount 4U, Black
AX100115
Universal Optical Fibre Adaptor Strips
Optical Fibre Adaptor Strips
Universal Optical Fibre Adaptor Strips are pre-loaded with six (single density) or 12 (double density) adaptor sleeves. Two types of adaptor sleeves are available; Phosphor Bronze and Zirconia Ceramic. Adaptor sleeves are used as the connecting interface between two optical fibre connectors.
Description (Colour is Black) Multimode Single Mode
Adaptor Strip , loaded with 3xSC Duplex (6 fibre) AX100094 AX101407
Adaptor Strip, loaded with 12xSC Simplex (12 fibre) AX100084 AX100532
Adaptor Strip, loaded with 6xLC Duplex (12 fibre) AX101729 AX101731
Adaptor Strip, Blank AX100066 AX100066
65
Fibre Patch Cords
and Pigtails
Fibre Patch Cords & Pigtails
FibreExpress Duplex Patch Cord Assemblies are of the highest quality available. They are assembled and 100 percent optically tested in our factory prior to shipment. All patch cords are built with high-quality connectors and cables which guarantees superior performance and excellent reliability.
Duplex Patch Cord
Description
Part Number
MULTIMODE FX300
62.5 μm
MULTIMODE FX60050 μm
MULTIMODE FX200050 μm
SINGLEMODE SPC
ST-ST, 2m (6 ft.) 70102419 AX200341 AX200799 AX200090
ST-ST, 3m (10 ft.) 70102420 AX200459 AX200795 AX200091
ST-ST, 5m (16 ft.) 70102447 AX200413 AX200800 AX200092
568SC-568SC, 2m (6 ft.) AX200056 AX200084 AX200603 AX200094
568SC-568SC, 3m (10 ft.) AX200057 AX200082 AX200589 AX200095
568SC-568SC, 5m (16 ft.) AX200058 AX200280 AX200624 AX200096
LC duplex-LC duplex, 2m (6 ft.) AX200517 AX200527 AX200664 AX200507
LC duplex-LC duplex, 3m (10 ft.) AX200518 AX200528 AX200665 AX200508
LC duplex-LC duplex, 5m (16 ft.) AX200519 AX200529 AX200666 AX200509
Hybrid Patch Cord
Description
Part Number
MULTIMODE FX300
62.5 μm
MULTIMODEFX60050 μm
MULTIMODE FX200050 μm
SINGLEMODE SPC
568SC-ST, 3m (10 ft.) AX200060 AX200196 AX200900 AX200421
LC duplex-ST, 3m (10 ft.) AX200699 AX200695 AX200809 AX200698
LC duplex-568SC, 3m (10 ft.) AX200580 AX200581 AX200668 AX200667
Single-ended (Pigtails)
Description
Part Number
MULTIMODE FX300
62.5 μm
MULTIMODE FX60050 μm
MULTIMODE FX200050 μm
SINGLEMODE SPC
ST-open, 2 m (6 ft.) 70100390 AX200458 AX200811 AX200097
SC-open, 2 m (6 ft.) 70101714 AX200192 AX200653 AX200098
LC-open, 2 m (6 ft.) AX200657 AX200658 AX200660 AX200659
Note: Also available as Simplex Patch Cords or custom assemblies, please contact Customer Service for more details.
FibreExpress
Backbone System
An inadequate or improperly installed network backbone
can severely limit overall network performance and, therefore,
your business’ productivity and efficiency. In today’s environment,
cabling network backbones are typically designed using a
combination of both multimode and singlemode fibre cables.
Configuring the right fibre backbone for your unique premise
or campus application is a complex process. Fortunately, selecting
the right fibre backbone cabling solution is comparatively
easy when you specify Belden IBDN FibreExpress Systems.
Many factors will influence the design of your specific optical
fibre backbone infrastructure and the appropriate mix of
singlemode and multimode fibre products and technologies.
FibreExpress Rack Mount Enclosure
The FibreExpress Manager 1U Rack Mount Patch Panel is a low-cost, compact assembly designed for interconnection or splicing of optical fibre cables, using up to three Fibre Express Manager Modules. The low-profile design minimizes rack space to only 45 mm (1.75 in.). An optional FibreExpress Manager 1U CableManagement Accessory is also available.
Description Part Number
FibreExpress Manager 1U, Black, 19 in., 5 Kg (11 lb) AX101943
FibreExpress Cable Management Accessory, Black, 19 in., 1 Kg (2 lb) AX102032
FibreExpress Manager Connector Module
The Connector Module is the basic building block of the Fibre Express Manager. It is designed with a unique release mechanism that allows it slide from the shelf like a PC card, easing management of patch cords.
DescriptionMULTIMODE
62.5 μm MULTIMODE
50 μm SINGLEMODE
MPO(m)-ST type, 12 pre-terminated AX101189 AX101190 AX101188
MPO(m)-SC Duplex, 12 pre-terminated AX101091 AX101114 AX101090
MPO(m)-MT-RJ(m), 12 pre-terminated AX101525 AX101526 AX101524
MPO(m)-LC, 12 pre-terminated AX101530 AX101531 AX101529
MPO(m)-LC, 24 pre-terminated AX102309 AX102308 AX102307
rd
66
MPO Cable Assembly
MPO Cable Assemblies are multi-fibre cables using single MPO connectors 6, 8 and 12-fibre that are used to interconnect pre-terminated devices such as Fibre Express Pre-terminated Modules and FibreExpress Bars. Depending on the application, MPO Cable Assemblies can use Ribbon Cables, or Loose Tube cables. MPO cables are available in lengths of up to 500 meters with a pulling-eye for ease of deployment.
MPO CABLE ASSEMBLYFOMC, MPO(F)-MPO(F)1 PULLING EYE, OFNP
MULTIMODEFX300
62.5 μm
MULTIMODEFX60050 μm
MULTIMODE FX200050 μm
SINGLEMODE
12 fibres, 10m AX250021 AX250345 AX250457 AX250224
12 fibres, 20m AX250105 AX250376 AX250412 AX250106
12 fibres, 50m AX250349 AX250065 AX250387 AX250071
12 fibres, 75m AX250060 AX250066 AX250413 AX250072
12 fibres, 100m AX250061 AX250067 AX250458 AX250073
Fibre & Copper Multimedia
Multimedia Boxes
MDVO Multimedia Outlet Box
The MDVO Multimedia Outlet Box brings unique versatility for multimedia work area installations. The box design provides cable management and helps maintain cable bend radius. The outlet box’s low profile design and side-entry offers better protection for patch cords. The outlet box can accept up to six EZ-MDVO, GigaFlex or MDVO Multimedia Modules or three SC Duplex adaptors. The MDVO Multimedia Outlet Box can be mounted directly on the wall or attached to standard electrical boxes. Included with the MDVO Multimedia box are three SC Duplex Mounting bezels and three MDVO Adaptors.
Part Number Description
A0643205 6-port, Grey
A0643206 6-port, Almond
A0643207 6-port, White
A0643208 6-port, Black
AX102595 6-port, Ivory
AX101988 6-port, Clear
Multimedia Boxes (Cont.)
MDVO Multimedia Modules
MDVO Multimedia Modules address audio/video and fibre applications. Fibre modules are available for LC Duplex, SC Simplex, ST Compatible multimode and MT-RJ multimode and single mode connections. The SC Duplex Adaptor is a fibre adaptor sleeve with flanges that mount into the SC Duplex mounting bezel (included in the MDVO Multimedia Outlet box). Audio/video modules are available for SVHS, RCA, BNC and Video F connections.
DescriptionPart Number
Grey Almond White Black Ivory
LC Duplex, Multimode AX102209 AX102210 AX102211 AX102619 -
LC Duplex, Single Mode AX102213 AX102214 AX102215 AX102216 -
SC Simplex, Multimode A0407003 A0407004 A0407005 A0407006 AX102596
SC Duplex Adaptor, Multimode
- A0649254 - - -
ST Compatible, Multimode A0407007 A0407008 A0407009 A0407010 AX102597
MT-RJ, Multimode - AX101467 - - -
MT-RJ, Single Mode AX101466 - - - -
MDVO Blank - - A0405538 A0405339
Custom multimedia connectors are also available, please contact Madison Technologies for more details. These products are in the process of being assessed for RoHS compliance. Please check our Web Site for the most current RoHS status.
A0649254 A0649254 A0407010
AX101467 A0406997 A0406999
Description
Part Number
Grey Holder
Almond Holder
White Holder
Black Holder
Ivory Holder
Coaxial, BNC A0406995 A0406996 A0406997 A0406998 AX102598
Coaxial, Video F A0406999 A0407000 A0407001 A0407002 AX102599
RCA, feed through, White insert
AX101823 AX101824 AX101825 AX101826 AX102601
RCA, feed through, Yellow insert
AX101827 AX101828 AX101829 AX101830 AX102602
RCA, feed through, Red insert
AX101831 AX101832 AX101833 AX101834 AX102603
RCA, feed through, Black insert
AX101835 AX101836 AX101837 AX101838 AX102604
SVHS, feed through AX101839 AX101840 AX101841 AX101842 AX102605
3.5mm Stereo AX102624 AX102625 AX102626 AX102627 AX102628
67
Multimedia Boxes (Cont.)
GigaFlex PS6+ Module
Workstation Outlets
Part Number Description
AX101063 T568A/B, Grey
AX101064 T568A/B, Almond
AX101065 T568A/B, White
AX101066 T568A/B, Black
AX101067 T568A/B, Orange
AX101068 T568A/B, Red
AX101069 T568A/B, Yellow
AX101070 T568A/B, Green
AX101071 T568A/B, Blue
AX101072 T568A/B, Purple
AX101073 T568A/B, Brown
EZ-MDVO PS5E Module
Workstation Outlets
Part Number Description
AX100645 T568A/B coded, Grey
AX100646 T568A/B coded, Almond
AX100647 T568A/B coded, White
AX100648 T568A/B coded, Black
AX100649 T568A/B coded, Orange
AX100650 T568A/B coded, Red
AX100651 T568A/B coded, Yellow
AX100652 T568A/B coded, Green
AX100653 T568A/B coded, Blue
AX100654 T568A/B coded, Purple
AX100655 T568A/B coded, Brown
Tools & Test Equipment
BIX Connecting Tool
The BIX Connecting Tool is the only tool required to terminate cables, pigtails or jumper wires on all GigaBIX and BIX connection products. The BIX Connecting Tool is a spring-activated hand tool. A single forward movement will seat the wire into the BIX IDC clip and cut off the excess wire. The tool will terminate 22-26-AWG plastic insulated solid copper conductors. A seperate leather BIX Tool Pouch to carry and protect the BIX Tool can be ordered.
Description Part Number
BIX Connecting Tool A0270165
Giga Flex Connecting Tool AX100749
Tool Pouch C0054642
BIX Testing
The BIX Test Probe is a single-pair probe that clips onto the termination clip of BIX Distribution or BIX Modular Jack Connectors to facilitate testing.
Part Number A0270166
Preperation Tool
Bonded-Pair Cable Preparation Tool
The Bonded-Pair Cable Preparation Tool makes it faster and easier to prepare cables for connector termination. This tool is ideal for use with Belden IBDN’s DataTwist® 350, MediaTwist®, and DataTwist®600e Bonded-Pair cables, providing special features that help separate twisted pairs. It can also be used to prepare any unbonded-pair cable for installation.
Description Part Number
Bonded-Pair Cable Preparation Tool
1797B
Termination Station
The Termination Station is an ergonomically designed holder that provides stability to the GigaFlex Module during the termination process. The station has pockets with locking features that steadily holds either MDVO-style or Keystone-style GigaFlex Modules or MediaFlex Inserts during pair placement and wire termination. Cable retainers on each end of the station will secure and hold cables during the pair placements process. The flat bottom surface will provide the required stability to safely terminate the modules. The tool is made of very durable plastic and its low profile makes it an easy tool to use and carry.
Description Part Number
Termination Station AX101852
System Certification
& Warranty Program
System Certification and Warranty Program
The Belden IBDN Certification Program is a rigorous process that ensures that your Belden IBDN ‘Certified’ System is composed of Belden IBDN components and that it has been designed and installed by a factory-trained Certified System Vendor. Belden IBDN ‘Certified’ Systems are supported by a series of warranties that surpass conventional product warranties.Certification adds important end-to-end system performance guarantees and ensures full compliance with cabling industry standard specifications — even after system installation (Installable Performance). A 25-year Product Warranty and a Lifetime Application Assurance program accompany each Belden IBDN ‘Certified’ System installation. These warranty programs include coverage for both parts and labor.
Quality Installation and ServiceBelden IBDN systems are designed, installed and field-tested by full trained and certified system contractors and integrators to further assure superior systems performance. They are also backed by a strict System Certification and Warranty Program.
68
69
Section 4
Racks & Cabinets
Open Rack Frames - 70
Q, S, C Series Cabinet - 70
Q, S, C Series Cabinet Accessories - 71
BP, CP, MR Series Cabinets - 72
BP, CP, MR Series Cabinet Accessories - 74
Wall Mount Cabinets - 77
Cable Management - 77
Wall Mount Frames - 78
70
Open Rack Frames
Patch Rack Open Rack Frames
Designed for situations where cable management is imperative, the brand new Patch Rack is fantastic value for money.
The superior Vertical Cable Management solutions ensure that there is no need for horizontal cable managers.
This means that every rack unit can be utilised for patch panel switching, this gives full use of the racks, fewer racks required and a smaller footprint on your office floor space.
FeaturesReduce real estate costs with smaller footprintInnovative and patented vertical cable management fingers ensure correct bend radius and eliminate the need for horizontal cable managersComplete solution protects cables from strain and protects bend radius and support requirements of all cable including fibreFlexibility of design ensures a solution can be tailored to fit budget and functionality
Type Size (H) Part Number
Patch Rack Frame Tapped holes 45RU (2100mm) 11340007
Patch Rack Cable Management Troughs 45RU (2100mm) 11340008
•
•
•
•
Q, S, C Series Cabinets
Q Series
Server Cabinet
The ‘Q’ Series cabinet is a high quality server and communications cabinet designed to be installed in equipment rooms or office environments where aesthetics, strength and functionality are important.
The cabinet is made from extruded aluminium joined together with aluminium corner pieces. The cabinet frame consists of steel sides, top and rear door with a toughened safety glass front door.
The ‘Q’ Cabinets offer a range of sizes and options designed to provide a flexible total solution.
Type Size (H) W x D Part Number
19” x 600 Q Cabinet Series 18RU
(900) 600 x 600 11412001
(900) 600 x 800 11412002
(900) 600 x 1000 11412006
19” x 600 Cabinet Series 25RU
(1200) 600 x 600 11412003
(1200) 600 x 800 11412004
(1200) 600 x 1000 11412005
19” x 600 Cabinet Series 38RU
(1800) 600 x 600 11412007
(1800) 600 x 800 11412008
(1800) 600 x 1000 11412011
19” x 600 Cabinet Series 45RU
(2100) 600 x 600 11412009
(2100) 600 x 800 11412010
(2100) 600 x 1000 11412012
(2100) 600 x 1200 11412013
19” x 800 Cabinet Series 38RU
(1800) 800 x 800 11412079
(1800) 800 x 1000 11412083
(1800) 800 x 1200 11412187
19” x 800 Cabinet Series 45RU
(2100) 800 x 800 11412095
(2100) 800 x 1000 11412099
(2100) 800 x 1200 11412103
71
S Series
Seismic Server Cabinet
The ‘S’ Series Server Cabinet is a heavy duty cabinet produced to the very highest levels of quality and design. Product development was driven by the need to provide a cabinet that will withstand the rigours of an earthquake and afford maximum protection to the valuable IT equipment inside.
Extensive consultation with Data Centre professionals has ensured that this enclosure meets industry best practice.
Features3 point lockingHeavy duty convex doors front and rear that are perforated for superior heat transferReinforced heavy duty side panels for increased strength and securityPre-drilled holes in steel frame to secure cabinet to floor
Typical Applications Data centresBroadcasting environmentsHigh security situationsHigh seismic activity areas
Product Type Size (H) W x D Part Number
S Cabinet Series 45RU (2100) 600 x 1000mm 11010001
S Cabinet Series 45RU (2100) 600 x 1200mm 11010002
S Cabinet Series 45RU (2100) 800 x 1000mm 11010010
C Series
Communication Cabinet
The new Communications Cabinet is designed to be cost effective and aesthetically appealing. It provides an enhancement to the range of cabinets and a total solution offering to our customers. A key element to the design of all the cabinets is the strong robust construction combined with sleek design and smart good looks. Comes complete with 2 shelves, fan kit and castors.
Typical Applications• Data centres• Communications rooms• Office environments• Small/medium server installation
Product Type Size (H) W x D Part Number
19” C Cabinet Series 25RU (1200) 600 x 800mm 31110009
19” C Cabinet Series 38RU
(1800) 600 x 600mm
(1800) 600 x 800mm
(1800) 600 x 960mm
31110018
31110019
31110020
19” C Cabinet Series 45RU
(2100) 600 x 600mm
(2100) 600 x 800mm
(2100) 600 x 960mm
(2100) 800 x 600mm
(2100) 800 x 800mm
(2100) 800 x 960mm
31110028
31110029
31110030
31110033
31110034
31110035
••
•
•
••••
Q, S, C Cabinet
Accessories
Shelves
Standard Shelves
Standard shelves 1RU standard 19” variantshelf designed to fit Server. Can support up to 45kg.
Type Size Part Number
19” Standard Shelf 340mm (for 600mm deep cabinet) 11820028
19” Standard Shelf 540mm (for 800mm deep cabinet) 11820027
19” Standard Shelf 600mm (for 800 / 1000mm deep cabinet) 11280047
C Series Shelves
These shelves are designed exclusively for the new range of C Series Communications Cabinets.
Type Size Part Number
19” C Series Shelf 350mm (for 600mm deep cabinet) 31180013
19” C Series Shelf 550mm (for 800mm deep cabinet) 31180014
19” C Series Shelf 710mm (for 960mm deep cabinet) 31180015
Strengthened Shelves
These shelves can be mounted in any Server Cabinet. Can support up to 90kg.
Type Size Part Number
19” Strengenthed Shelf 400mm (600x800mm cabinet) 11820020
19” Strengenthed Shelf 600mm (800x1000mm cabinet) 11820041
Sliding Shelves
These shelves can be mounted in any Server Cabinet. They offer the option of either Standard to support up to 45kg or Strengthened to support up to 100kg in weight.
Type Size Part Number
19” Sliding Shelf 45kg 400mm (all cabinets) 11820016
19” Sliding Shelf 100kg 400mm (all cabinets) 11820031
19” Sliding ShelfFor C Cabinets ONLY
(Brackets required for cabinets over 600 deep)11820017
KVM Sliding Shelf
Cyberview 8 port KVM Keyboard sliding shelf combines a rackmount LCD monitor, PS/2 keyboard, and touchpad mouse in a space-saving 1RU industrial strength drawer. Available with 15” LCD flat panel monitor.
Part Number Type
35800022 15” 8 port KVM
Vertical Power Rails
The 9 outlet power panel mounts in any Server or communications cabinet. The 18 outlet power panel mounts in any Server or Communications cabinet where the cabinet height is 1800mm or 2100mm.
These units come with a 2m cord-set and are equipped with10A sockets and a 10A B Curve MCB.
Type Part Number
Vertical 9 Outlets 11290007
Vertical 18 Outlets 11290008
d
72
Fan
Fan kits
The 230V two fan kit can be mounted in any Server cabinet.
Type Part Number
Two Fan Kit 11920001
Four Fan Shelf 11920006
HiPerCooler Fan Unit
The HiPerCooler is a brand new innovation designed to solve potentially disastrous overheating issues in server racks that have been loaded with a high density of equipment.
Type Part Number
3 speed twin fans with LED 11920022
Fan Filter
Filter packs for vents on 600mm or 800mm cabinets respectively. The 600 filters can be used on the 350mm and 450mm P cabinets.
Part Number Type
11280032 Fan Filter 600
11280034 Fan Filter 800
11480024 Fan Filter 1000
Chimney
This bolts over the vent in the top panel of any Server cabinet. This provides a tidy, clean solution to hiding cable entry from the ceiling and ensures cables are hidden neatly out of sight.
Type Part Number
1m high Chimney 11890005
Bases
Multipurpose Base Wheels
Combining a multipurpose base with the wheel set provides a mobile base for a cabinet.
Type Part Number
Base Wheels 11180111
Bases
Multipurpose bases allow cabinets to be raised 80mm off the floor to allow cable access under the cabinet frame.
Type Size Part Number
Multipurpose Base 19” 600 x 600mm 11180108
Multipurpose Base 19” 600 x 800mm 11180109
Multipurpose Base 19” 600 x 1000mm 11180120
Multipurpose Base 19” 600 x 1200mm 11180121
Multipurpose Base 25” 800 x 800mm 11180122
Multipurpose Base 25” 800 x 1000mm 11180123
Multipurpose Base 25” 800 x 1200mm 11180124
BP, CP, MR Series Cabinets
BP Series
The BP series of cabinets are designed to provide maximum functionality and versatility with varied depths available between 600mm and 1000mm. This range gives you a cost effective cabinet for most applications. Ideally suited for computer raised flooring installations, the BP series makes it simple for computer room planning with the 600mm footprint.
Features and BenefitsRigid all-welded steel constructionRequires no costly ‘on-site’ assemblyFully adjustable to suit any application or requirementExtensive range of optional fittings & accessoriesFully complies with International Standard IEC 297Cabinet top panel is an integral part of the frame which comes inclusive with cable entry knockouts (200x200mm)
Standard Cabinet
FeaturesFrame with Integrated Top Panel - 200x200mm knockouts & 270x270mm openingAccess Panel - Unvented 4 off 50x50 Knock-outsFront Door - Acrylic - Key LockableRear Door - Steel - Key LockableSide Panels - 2 off - Unvented - LockableMounting Angles - 4 off - Mounted at Front and RearCabinet finish - Powder Coated
Usable Rack Units Cabinet Depth Cabinet Height Part Number
BP Cabinet Series 27 RU
600mm 1304mm MTCAB27A600C
800mm 1304mm MTCAB27A800C
900mm 1304mm MTCAB27A900C
BP Cabinet Series 40 RU
600mm 1881mm MTCAB40A600C
800mm 1881mm MTCAB40A800C
900mm 1881mm MTCAB40A900C
BP Cabinet Series 45 RU
600mm 2104mm MTCAB45A600C
800mm 2104mm MTCAB45A800C
900mm 2104mm MTCAB45A900C
Note: Usable depth = Cabinet depth minus 50mm
Frame Only
FeaturesFrame with Integrated Top Panel - 200x200mm knockout with 270x270mm openingMounting Rails - 4 off - Mounted at Front and RearFrame Finish - Powder Coated
Usable Rack Units Cabinet Depth Cabinet Height Part Number
27 RU 600mm 1304mm MTCAB27A600F
27 RU 800mm 1304mm MTCAB27A800F
27 RU 900mm 1304mm MTCAB27A900F
40 RU 600mm 1881mm MTCAB40A600F
40 RU 800mm 1881mm MTCAB40A800F
40 RU 900mm 1881mm MTCAB40A900F
45 RU 600mm 2104mm MTCAB45A600F
45 RU 800mm 2104mm MTCAB45A800F
45 RU 900mm 2104mm MTCAB45A900F
45 RU 1000mm 2104mm MTCAB45A1000F
••••••
•
••••••
•
••
y Server cabinet.
73
CP Series
The CP range of cabinets gives you a cost effective product with varied depth options. The roomy 800mm wide cabinet allows the installer to choose either 19”, 21” or 23” spacing. The CP Series allows for large and easy management of cable runs either in the rear or down the cabinet sides. These cabinets give a broader range of equipment and cable management options, making this series very economically worthwhile. For 19”, 21” and 23” applications, order brackets separately.
Features and BenefitsRigid all-welded steel constructionRequires no costly ‘on-site’ assemblyFully adjustable to suit any application or requirementExtensive range of optional fittings & accessoriesFully complies with International Standard IEC 297
Complete Cabinet
FeaturesFrame with integrated top panel200x200mm knockouts & 270x270mm openingAccess Panel: unvented 4 off 50x50 knock-outsFront Door: Acrylic key lockableRear Door: Steel key lockableSide Panels: 2 off unvented, key lockableMounting Rails: 4 off Mounted at Front and RearCabinet Finish: Powder Coated
Usable Rack Units Cabinet Depth Cabinet Height Part Number
45 RU 800mm 2104mm MTCAB45B800C
45 RU 900mm 2104mm MTCAB45B900C
Cabinet width 800mmUsable depth = Cabinet depth minus 50mm
Frame Only
FeaturesIntegrated Top Panel200x200mm knockouts with 270x270mm openingMounting Rails: 4 off - Mounted at Front and RearFrame Finish: powder coated
Usable Rack Units Cabinet Depth Cabinet Height Part Number
45 RU 800mm 2104mm MTCAB45B800F
45 RU 900mm 2104mm MTCAB45B900F
•••
•
•
••
•
•••••
••••
MR Series
The MR series, with improved cable management access, from the top and bottom of the cabinet and also front and rear of the base, allows additional access points which broaden the option of cabinet placement and cable management.
Features and BenefitsRobust fully welded construction (load tested to 600Kg)Installer friendly fittings and adjustabilityFlush fitting doors and side panelsExtensive range of optional fittings & accessories
Complete Cabinet
FeaturesFrameRoof Panel with 200x200mm knockouts & 270x270mm openingAccess Panel: unvented 4 off 50x50 knock-outs Front Door: Acrylic key lockableRear Door Steel: key lockableSide Panels: 2 off unvented key lockableMounting Rails: 4 off mounted at front and rearCable access ports: front & rear, 6 off 100x50mm OvalCentre braces: 2 offCabinet finish: powder coated
Usable Rack Units Cabinet Depth Cabinet Height Part Number
45 RU 850mm 2173mm MTCAB45C850C
45 RU 900mm 2173mm MTCAB45C900C
45 RU 1000mm 2173mm MTCAB45C41000C
Note: Cabinet width 600mm Usable depth = Cabinet depth minus 50mm
Frame Only
FeaturesCentre Braces: 2 offMounting Rails: 4 off mounted at front and rearFrame finish: powder coated
Usable Rack Units Cabinet Depth Cabinet Height Part Number
45 RU 850mm 2173mm MTCAB45C850F
45 RU 900mm 2173mm MTCAB45C900F
45 RU 1000mm 2173mm MTCAB45C1000F
•
•••
••
•
•••••
••
•••
74
BP, CP, MR Series
Cabinet Accessories
Doors
Perforated Doors
Cabinet Height Part Number
BP 27RU MTCABDP27A
BP 40RU MTCABDP40A
BP 45RU MTCABDP45A
CP 45RU MTCABDP45B
MR 45RU MTCABDP45C
Acrylic Doors
Cabinet RU Part Number
BP 27RU MTCABDA27A
BP 40RU MTCABDA40A
BP 45RU MTCABDA45A
CP 45RU MTCABDP45B
MR 45RU MTCABDP45C
Steel Doors
Cabinet Height Part Number
BP 27RU MTCABDS27A
BP 40RU MTCABDS40A
BP 45RU MTCABDS45A
CP 45RU MTCABDS45B
MR 45RU MTCABDS45C
Castors
Cabinet Part Number
Standard BP , CP, MR MTCABCKS
Heavy Duty BP, CP, MR MTCABCKHD
Access Panels
FeaturesFor all freestanding cabinets370mm x 310mm with 4 off 50 x 50 knockouts
Description Part Number
Unvented MTCABAPRU
Vented MTCABAPRV
Unvented Vented
••
Plinths
FeaturesProvides cable entry at rear of cabinetLoad capacity to 250kg maximum (UDL)50mm HighMatching colour (textured grey nurse)
Cabinet Depth BP Part Number CP Part Number
600mm MTCABPLA600 -
800mm MTCABPLA800 MTCABPLB800
900mm MTCABPLA900 MTCABPLB900
1000mm MTCABPLA1000 -
NoteComes IndividuallyRaises cabinet 50mm off floorCP and 1000mm deep available upon
Roof Mount Cable Duct
Description Part Number
Telescopic Chimney
APO Grey MTCABRMCD
Centre Braces
Cabinet Cabinet Depth Part Number
BP 600mm MTCABCB600A
BP 800mm MTCABCB800A
BP 900mm MTCABCB900A
Levelling Feet Kit
For all freestanding cabinets
Description Part Number
Adjustable - Standard MTCABLK
Adjustable - Plinth MTCABLKPL
••••
•••
75
Fan Trays
Compact Fan Trays
Fans Flow Rate Colour Part Number
4 0.11m3/s Black MTCABFAN4C
2 0.05m3/s Black MTCABFAN2C
Note: Required vented access panel
Rack Mounted Fan Tray
FeaturesFor all floor and freestanding cabinetsMounting 19” Rack mountingCable Length - 2.5m
Fans Flow Rate Colour Part Number
4 0.11m3/s Black MTCABFANRKM4
Shelves
Fixed Shelves
FeaturesShelves are designed to carry up to 100kgFitted into racks and cabinets it provides a rigid storage facilityIdeal for mounting of components such as modems and non 19” equipment
Depth Vented
600mm MTCABFS600
800mm MTCABFS800
900mm MTCABFS900
1000mm MTCABFS1000
Cantilever Shelves
FeaturesMay be fixed at either the front or the rear of the cabinetDesigned to carry up to 25kgFront fold on shelf is 15mm deep
Description 19”
1RU x 300mm Deep 2019-CLSH-1U300
2RU x 300mm Deep 2019-CLSH-2U300
2RU x 350mm Deep 2019-CLSH-2U350
2RU x 400mm Deep 2019-CLSH-2U400
2RU x 450mm Deep 2019-CLSH-2U450
3RU x 300mm Deep 2019-CLSH-3U300
3RU x 350mm Deep 2019-CLSH-3U350
3RU x 400mm Deep 2019-CLSH-3U400
Cantilever Shelf Bracket ACC-CANT/SH-BKT
Note: Cantilever bracket secures product to prevent sliding back on shelf
•••
•••
•••
Shelves (Cont.)
Telescopic Shelves
FeaturesOccupies 1RU of panel space
Sliding shelves are used to support equipment requiring
frequent access
Supplied with slides designed to carry up to 40kg
Depth 19”
400mm 2019-SH-400TEL
450mm 2019-SH-450TEL
700mm 2019-SH-700TEL
Sliding-Swivel Keyboard Shelves
FeaturesOccupying 2RU of panel space
Designed to hold keyboard in place
Pivoting on shelf through 360 degrees so as to slide the
keyboard past the vertical members for storage
Includes heavy duty slides extending to 400mm or 700mm
19”
2019-SH-KBRD
Console Drawer
FeaturesAvailable in 3 sizes for storage space
Description 19”
2RU x 400mm Drawer 2019-DRW-2RU400
3RU x 400mm Drawer 2019-DRW-3RU400
4RU x 400mm Drawer 2019-DRW-4RU400
Note: Cantilever bracket secures product to prevent sliding back on shelf
•
•
•
•
•
•
•
•
old on shelf is 15mm deep
pace
00
00
00
signed to carry up to 40kg
76
Shelves (Cont.)
Blank Panels
FeaturesBlack powder coated finishAvailable in six different sizesPlain or ventedCustom sizes available on request
Plain
Size (RU) Part Number
1RU BPNL-19-01U
2RU BPNL-19-02U
3RU BPNL-19-03U
4RU BPNL-19-04U
5RU BPNL-19-05U
6RU BPNL-19-06U
Vented
Size (RU) Part Number
1RU BPNL-19V-01U
2RU BPNL-19V-02U
3RU BPNL-19V-03U
Fixing Hardware
Cage Nuts and Bolts
Necessary for mounting of equipment into racks and cabinets.
Description Part Number
Cage Nut MT190CN
Bolt to suit Cage Nut, with Washer
MT190CB
Fixing Kit (Includes Nut, Bolt and Washer)
ACC-FIX-KIT
Fixing Kit (Includes Black Nut, Bolt and Washer)
ACC-FIX-KIT-BLACK
Cooling Options
1RU Panel Fan Trays
FeaturesOccupies 1RU of space, useful where there are isolated “hot spots” or for general coolingUp to 6 fans may be installed in each traySupplied fully wired for 240V AC
Description Part Number
1RU Fan Tray - 6 Fans
2019-FANTR-1U/6
••••
•
••
Cooling Options
Fan Panel Unit
FeaturesOccupies 3RU of vertical rack spaceUsed where front to back air movement is requiredFully wired for 240V AC
Description Part Number
Horizontal Fan Panel 3RU - 3 Fan
FTR-HOR-343F
Horizontal Fan Panel 1RU - 4 Fan
2019-FAN-1RU
Power Rails
FeaturesFan units can be fitted either to top or bottom of framesFull range of vertical and horizontal power rails are availableWired for a maximum total load of 10 ampSupplied with 2 metres of flexible cable, and a 10A 3 pin plugEnergy Office Approval number CS6003N applies
Options10 amp and 15 amp plug on lead10 amp captive plug15 amp captive plug20 amp captive plug - round or flat pinNeon light10, 15 and 20 amp circuit breakersOn/off switchExtra lead length
Horizontal
Description Height Part Number
Horizontal 6 Outlet 10A 50mm PB-HOR6-10A
Horizontal 12 Outlet 10A 140mm PB-HOR12-10A
Horizontal 12 Outlet IEC 50mm PB-HOR12-IEC
Horizontal 16 Outlet IEC 50mm PB-HOR16-IEC
Vertical
Description Part Number
Vertical 10 Outlet 10A MTCABVPR10
Vertical 20 Outlet 20A MTCABVPR20
••
•
•••••
••••••••
CS6003N applies
d
flat pin
77
Wall Mount Cabinets
WF Series
The WF Series of Cabinets are designed as medium sized yet strong units, that provide versatility for wall and floor mounting.
Features and BenefitsOption to be floor mounted or wall mountedEasy wall mount installation with Bracket KitRigid all-welded steel constructionAvailable with either ‘see through’ Acrylic Door or more secure Steel DoorFront mounted 19” Rack Mounting Angles can be easily repositioned
Complete Cabinet
FeaturesFront Door: acrylic key lockableMounting Angles: 2 off mounted at front Wall Mount Bracket Kit: allows for ease of installationCabinet Finish: powder coated
Usable Rack Units Cabinet Depth Cabinet Height Part Number Part Number (Steel)
6 RU 350mm 380mm MTCABWM6350 MTCABWM6350S
6 RU 500mm 380mm MTCABWM6500 MTCABWM6500S
12 RU 350mm 600mm MTCABWM12350 MTCABWM12350S
12 RU 500mm 600mm MTCABWM12500 MTCABWM12500S
18 RU 500mm 870mm MTCABMW18500 MTCABMW18500S
Note: * For steel door, replace 02 with 01Standard cabinet width 535mmUsable depth = Cabinet depth minus 20mm
Frame Only
FeaturesMounting Rails: 2 off mounted at frontFrame Finish: powder coated
Usable Rack Units Cabinet Depth Cabinet Height Part Number
6 RU 350mm 380mm MTCABWM6350F
6 RU 500mm 380mm MTCABWM6500F
12 RU 350mm 600mm MTCABWM12350F
12 RU 500mm 600mm MTCABWM12500F
18 RU 500mm 870mm MTCABWM18500F
Cable Management
Cable Trays
Height Width Part Number
27RU 102mm MTCABCT27102
27RU 152mm MTCABCT27152
40RU 102mm MTCABCT40102
40RU 152mm MTCABCT40152
45RU 102mm MTCABCT45102
45RU 152mm MTCABCT45152
••••
•
••••
••
Cable Management
FeaturesFitted horizontally in either back or front of rack for cable management1RU or 2RU high to fit 19” racksBlack powder coated zincannealPlastic cable clips
Description Type Part Number
4 Ring, 1RU Horizontal MT2401BK
5 Ring, 1RU Horizontal MT2401-5BK
5 Ring, 2RU Horizontal MT2405
FeaturesFlexible and modular designsSuits optical fibre and copper cablingFibre friendly cable trayCable Clips on Horizontal Unit: 5 off, pre-attachedCable Clips on Vertical Unit: 5 off, looseBrackets on Horizontal Unit: not applicableBrackets on Vertical Unit: 3 off with fastenersPowder Coated: textured black finish
Height Type Part Number
27 RU Vertical MTCABCMV27
40 RU Vertical MTCABCMV40
45 RU Vertical MTCABCMV45
Closed Cover Cable Management
FeaturesFitted horizontally in either back or front of rack for cable management1RU or 2RU high to fit 19” racksBlack powder coated zincanneal with slotted finger ducts fitted to base plate
Description Part Number
1RU MT2401-CV
2RU MT2405-CV
Cable Management Rings
FeaturesUsed for vertical management of cables to rack frame1RU or 2RUBlack powdercoated steel
Height (RU) Dimensions (W x D) Part Number
1RU 58mm x 79mm MT2407
1RU 58mm x 89mm MT2417
1RU 86mm x 78mm MT2418
2RU 108mm x 78mm MT2406
2RU 80mm x 78mm MT2408
2RU 40mm x 81mm MT2409
•
•••
••••••••
•
••
•
••
cksneal
78
Velcro Ties
Features200mm and 300mm lengths in BlackSupplied in packs of 25
Length Part Number
200mm MT8100-200
300mm MT8100-300
Wall Mount Frame
Wall Mount Swing Frame
Swing frames are an alternative to wall mount cabinets when extra depth is not required, and space is tight.
FeaturesBlack powder coat finishSupplied with fixing kits for mounting of equipment
Height (RU) Depth Width Part Number
2RU 100mm 552mm MT19021
2RU 100mm 552mm MT19022
2RU 100mm 552mm MT19023
4RU 200mm 552mm MT19041
4RU 200mm 552mm MT19042
4RU 200mm 552mm MT19043
6RU 300mm 552mm MT19061
6RU 300mm 552mm MT19062
6RU 300mm 552mm MT19063
••
••
f 25
79
Section 5
Active Equipment
Company Introduction - 80
Pluggable Modules - 81
Media Conversion - 81
Switches - 83
Network Management Software - 85
Fibre Network Interface Cards - 85
Global Service & Support Program - 86
80
Company Introduction
Allied Telesis is a world class leader in delivering IP/Ethernet network solutions to the global marketplace.
They create innovative, standards-based IP networks that connect users with their voice, video and data services.
They are an international company headquartered in Japan with major divisions in Europe, Asia and North and South America. Their partners
include the world’s largest distributors, integrators, solution providers and resellers to assure you receive immediate local service and support.
Allied Telesis worldwide research and development centres work to bring you innovative products that help your company succeed. They also
operate state-of-the art production facilities manufacturing more than 600 different products every month, which are shipped globally.
As a major industry manufacturer and importer, Allied Telesis is committed to providing you with products designed and built to the highest
possible quality. Their manufacturing conforms to appropriate ISO 9000 standards, and all of their facilities adhere to the strict ISO 14001
standard to ensure a healthy world environment.
81
Pluggable Modules
6BIC, SFP, XFP Pluggable Module
The Allied Telesis range of Pluggable
Modules provides a wide range of fibre and copper connectivity
modules. These include Gigabit Interface Converter (GBIC), Gigabit
Small Form Pluggable (SFP), and 10Gbps Small Form Pluggable
(XFP) modules.
The Pluggable Optical Modules are designed to fit pluggable slots
fitted to:
Media Converters
Switches
Routers
DescriptionGBIC Part Number
SFP Part NumberXFP Part Number
Distance
Copper 1000T AT-G8T - - 100m
Copper 10/100/1000T - AT-SPTX - 100m
Multimode 100FX - AT-SPFX/2 2km
Single Mode 100FX - AT-SPFX/15 - 15km
Single Mode 100FX (1310nm TX, 1550nm RX)
- AT-SPXBD-LC-13 - 15km
Single Mode 100FX (1550nm TX, 1310nm RX)
- AT-SPXBD-LC-15 - 15km
Multimode 1000SX AT-G8SX-01 AT-SPSX - 550m
Single Mode 1000LX AT-G8LX10 AT-SPLX10 - 10km
Single Mode 1000LX (1310nm TX, 1490nm RX)
AT-G8BD13 AT-SPBD10-13 - 10km
Single Mode 1000LX (1490nm TX, 1310nm RX)
AT-G8BD14 AT-SPBD10-14 - 10km
Multimode 10Gbps - - AT-XPSR 300m
Single Mode 10Gbps - - AT-XPLR 10km
AT-XPSR AT-G8T
AT-SPSX AT-SPZX80
AT-SPFX2 AT-SPBD10-13
•
•
•
Media Conversion
Allied Telesis is the World’s largest media converter manufacturer.
The vast range of products provides connectivity solutions for almost
all the needs of Carrier, Enterprise, and Small Business customers.
Allied Telesis media converters enable connection of disparate
cabling types in networks where many cabling types exist. Network
segments may also operate at different speeds and media converters
can be used to convert between one speed and another.
Typically, media converters are used to connect copper and optical
fibre cabling that coexist in a network. Converters exist in a variety
of stand-alone, multi-port and modular form factors. These different
physical forms address the need for different applications and
conversion densities.
Converteon Managed Media Conversion
The Converteon family provides the next-generation of managed media conversion. Expandable from a single unit to a modular 18 slot chassis, Converteon provides Fast Ethernet and Gigabit rate media conversion with expansion capabilities to other protocols in the future. Current support for IEEE.802.3ah EFM makes Converteon ideal for both service providers and Enterprise.
Converteon 18 Slot Chassis – Managed Media Conversion
FeaturesIntermixable redundant AC-DC chassis Optional Telnet and SNMP management Hot-swappable blades Field serviceable power supplies and fans
AT-CV5000
Description Part Number
18 Slot Rack Mount Chassis AT-CV5000
Telnet and SNMP Management Module AT-CV5M01
Fan Tray AT-CVFAN
240V Power Supply AT-PWR14
48VDC Power Supply AT-PWR15
Converteon Standalone Chassis – Managed Media Conversion
FeaturesExternal AC Power Adaptor
AT-CV1200 AT-CV1000
Description Part Number
1 Slot Standalone Chassis AT-CV1000
2 Slot Standalone Chassis AT-CV1200
Optional Redundant Power for AT-CV1200 AT-CV1200PSU
•
•
••
•
AT SPSX AT SPZX80
82
Converteon Managed Media Conversion (Cont.)
Converteon Hot Swappable Blades
FeaturesHot swappable blade Support for Small Form Pluggable (SFP) modules Bidirectional single fibre conversion Speed and media conversion
AT-CVIKKS AT-CM2K0S
Converts From Converts To Distance Part Number
SFP SFP - AT-CV1KSS
Copper 100TX SC Fibre Multimode 100FX 2km AT-CV102
Copper 100TX SC Fibre Single Mode 100FX 15km AT-CV102/1
Copper 10/100/1000 1000X SFP - AT-CM2K0S
Copper 10/100SC Single Fibre Single Mode 100FX
(1310nm TX, 1550nm RX)15km AT-CM212A/1
Copper 10/100SC Single Fibre Single Mode 100FX
(1550nm TX, 1310nm RX)15km AT-CM212B/1
Copper 4x E1/T1 100X SFP - AT-CM70S
Copper RS232/RS422/RS485 100X SFP - AT-CV81S
Multi-channel Media Converter
The AT-MCF2000 provides ultra high-density, modular, multi-channel media conversion. The units can be unmanaged or SNMP managed with the installation of the optional management module.
FeaturesSmall 1RU Chassis High density conversion with up to 24 fast Ethernet channels Hot swappable media blades Hot swappable power supply modules
AT-MCF2000 AT-MCF2000M
Product Distance Part Number
2 Slot Chassis - AT-MCF2000
12 channel 10/100 to 100FX LC Multimode 2km AT-MCF2012LC
12 channel 10/100 to 100FX LC Single Mode 15km AT-MCF2012LC/1
SNMP Management Module - AT-MCF2000M
Redundant AC Power Module - AT-MCF2000AC
••••
••••
Standalone Media Converters & Media Converting Switches
The family of unmanaged media converters consists of standalone media converters, media converting switches and mounting products. The standalone media converters have the option to be fitted with rubber feet to allow the product to be desktop mounted. Standalone media converters can be fitted to trays for 19” rack mounting and be fitted to a chassis for internal and redundant power supply.
Mounting Products
Features19” Mounting of standalone media converters and media converting switches Economy mounting trays 12 slot chassis offers internal and redundant power supply option 12 slot chassis has 48VDC power supply option
Holds Converters Features Part Number
1 Standalone 1RU 19” Mounting Tray AT-TRAY1
4 Standalone 1RU 19” Mounting Tray AT-TRAY4
12 Standalone 3RU 19” Chassis with internal power supply AT-MCR12
- Redundant AC Power Supply for AT-MCR12 AT-PWR4
- Redundant 48VDC Power Supply for AT-MCR12 AT-PWR9
Standalone Media Converters
FeaturesSupport for multimode and single mode fibre Mounting options in chassis or tray Half and full duplex operation
AT-MC116XL AT-MC1008/SP
Converts From Converts To DistanceMedia Converter Part
Number
Copper 10T SC Fibre Multimode 10FL 2km AT-MC14
Copper 10/100 SC Fibre Multimode 10/100 300m AT-MC116XL
Copper 100T SC Fibre Multimode 100FX 2km AT-MC102XL
Copper 100T SC Fibre Single Mode 100FX 15km AT-MC103XL
SC Fibre Multimode 100FX SC Fibre Single Mode 100FX 15km AT-MC104XL
Copper 1000T SC Fibre Multimode 1000SX 220m-550m AT-MC1004
Copper 1000T GBIC - AT-MC1008/GB
Copper 1000T 1000X SFP - AT-MC1008/SP
SC Fibre Multimode1000SX SC Fibre Single Mode 1000LX 10km AT-MC1001
•
•••
•••
AT-TRAY1
AT-TRAY4
AT-MCR12
AT-PWR4 AT-PWR9
83
Standalone Media Converters & Media Converting Switches (Cont.)
Standalone Speed/Media Converting Switches
FeaturesConvert speed as well as media typeAuto MDI/MDI-X crossover Store and forward switching modeMounting options in chassis or trayMissingLink support
AT-FS202
AT-FS238A/1 AT-FS238B/1
Switches From Switches To Distance Part Number
Copper 10/100 SC Fibre Multimode 100FX 2km AT-FS202
Copper 10/100 SC Fibre Single Mode 100FX 15km AT-FS202SC/FS1
Copper 10/100SC Single Fibre Single Mode 100FX
(1310nm TX, 1550nm RX)15km AT-FS238A/1
Copper 10/100SC Single Fibre Single Mode 100FX
(1550nm TX, 1310nm RX)15km AT-FS238B/1
Copper 10/100/1000 SFP - AT-GS2002/SP
Switches
Allied Telesis’ extensive switch product line provides high
performance, cost effective solutions for your business networking
needs. Ideal for connecting computers, servers, storage devices
and VoIP phones in businesses of all sizes, Allied Telesis switches
are available in managed, Websmart and unmanaged models with
a variety of Gigabit and Fast Ethernet port densities designed to
provide optimum network configurations.
Unmanaged Switches
Desktop and Rack Mounting Unmanaged Swtiches
The GS900 series is an unmanaged Gigabit Ethernet switch family, designed for power workers in a small office environment. The FS700 series is an unmanaged Fast Ethernet switch family, designed for the small office environment or for smaller workgroups connected over optical fibre uplinks.
FeaturesLarger switches feature internal Power Supply Unit (PSU)Some models include 19” rack mounting kitsPower over Ethernet (PoE) models1RU form factorAuto MDI/MDI-X on all ports
AT-FS705EFC
AT-FS708/POE
•••••
•••••
Unmanaged Switches (Cont.)
AT-FS716L
AT-GS900/5E
Distribution Ports Uplink Ports Mounting Part Number
8 x 10/100TX 1 x SC Fibre Multimode 100FX Rack Mount, Internal PSU AT-FS709FC
16 x 10/100TX - Rack Mount, Internal PSU AT-FS716L
24 x 10/100TX - Rack Mount, Internal PSU AT-FS724L
16 x 100/100TX 1 x SC Fibre Multimode 100FX Rack Mount, Internal PSU AT-FS717FC
8 x 10/100TX,Power over Ethernet
1 x SFP 1000X Rack Mount, Internal PSU AT-FS708/POE
5 x 10/100/1000T - Desktop, Internal PSU AT-GS900/5
8 x 10/100/1000T - Desktop, Internal PSU AT-GS900/8
16 x 10/100/1000T - Rack Mount, Internal PSU AT-GS900/16
24 x 10/100/1000T - Rack Mount, Internal PSU AT-GS900/24
8 x 10/100/1000T, Power over Ethernet
1 x SFP 1000X Rack Mount, Internal PSU AT-GS900/8POE
Managed Switches
Websmart Managed Switches
The GS950 series is a Gigabit Ethernet Websmart switch family designed as a cost effective alternative to SNMP managed devices at the network edge. Supporting many capabilities such as Quality of Service (QoS) and packet prioritization, these switches can be used in networks transporting voice, data, and video. The FS750 series is a family of Fast Ethernet Websmart switches.
Features1RU form factor Small Form Pluggable (SFP) uplink ports Auto MDI-MDI/X on all copper ports Trunk linking aggregation Port mirroring Spanning Tree Protocol (STP) Supports 64 port based VLANs Web browser and local RS232 configuration 19” Rack Mounting
AT-FS750/16
AT-FS750/48
AT-FS750/24POE
AT-GS950/16
•••••••••
84
Managed Switches (Cont.)
Distribution Ports Uplink Ports Part Number
16 x 10/100TX 2 x 10/100/1000T & SFP 1000X Combo AT-FS750/16
24 x 10/100TX 2 x 10/100/1000T & SFP 1000X Combo AT-FS750/24
48 x 10/100TX 4 x 10/100/1000T & SFP 1000X Combo AT-FS750/48
24 x 10/100TX, Power over Ethernet
2 x 10/100/1000T & SFP 1000X Combo AT-FS750/24POE
8 x 10/100/1000T 2 x SFP 1000X AT-GS950/8
16 x 10/100/1000T 2 x SFP 1000X AT-GS950/16
24 x 10/100/1000T 2 x SFP 1000X AT-GS950/24
48 x 10/100/1000T 4 x SFP 1000X AT-GS950/48
SNMP Managed Switches – Layer 2
The 8000 series is an entry level SNMP managed switch family targeted towards the office environment. The wide range of port densities and uplink options ensures that the majority of network designs can be cost effectively built. Stackability allows simpler network management, whilst the Power over Ethernet models are ideal for use in Voice over IP (VoIP) installations.
Features1RU form factor Non-blocking wire speed forwarding VLAN support Port security IGMP snooping Web-based management and SNMP Stackable up to six devices DSCP (DiffServ) for Layer 3 QoS 19” Rack Mounting
AT-8000S/24
AT-8000S/48POE
Distribution Ports Uplink Ports Part Number
24 x 10/100TX 2 x 10/100/1000T & SFP 1000X Combo AT-8000S/24
48 x 10/100TX 2 x 10/100/1000T & SFP 1000X Combo AT-8000S/48
24 x 10/100TX, Power over Ethernet
2 x 10/100/1000T & SFP 1000X Combo AT-8000S/24POE
48 x 10/100TX, Power over Ethernet
2 x 10/100/1000T & SFP 1000X Combo AT-8000S/48POE
24 x 10/100/1000T 4 x 10/100/1000T & SFP 1000X Combo AT-8000GS/24
48 x 10/100/1000T 4 x 10/100/1000T & SFP 1000X Combo AT-8000GS/48
24 x 10/100/100T, Power over Ethernet
4 x 10/100/1000T & SFP 1000X Combo AT-GS8000/24POE
•••••••••
Managed Switches (Cont.)
SNMP Managed Switches – Layer 3
A versatile and highly featured Gigabit and Fast Ethernet Layer 3 switch family, ideally suited as a core solution for small to medium networks, in the aggregation tier of large networks, or for server farm and data centre aggregation.
Features1RU form factor, 3RU on AT-SBx908 Internal redundant modular power options VLAN support and double tagging Memory socket on front panel XFP and XEM modules Request details for full features and specifications for each model
AT-9924SP
AT-x900-24XS
AT-10408XP
AT-PWR01-80
Distribution Ports Uplink Ports Features Part Number
24 x SFP 1000X- Wirespeed Layer 3 IPv4 Routing, 48Gbps
Switching FabricAT-9924SP
24 x 10/100/1000T4 x SFP 1000X Wirespeed Layer 3 IPv4 Routing, 48Gbps
Switching FabricAT-9924T
24 x SFP 1000X2 x XEM Bays Wirespeed Layer 3 IPv4 Routing, 154Gbps
Switching FabricAT-x900-24XS
24 x 10/100/1000T2 x XEM Bays Wirespeed Layer 3 IPv4 Routing, 154Gbps
Switching FabricAT-x900-24XT
48 x 10/100TX4 x SFP 1000X Wirespeed Layer 3 IPv4 and IPv6 Routing,
37.6Gbps Switching FabricAT-x900-48FE
48 x SFP 100X4 x SFP 1000X Wirespeed Layer 3 IPv4 and IPv6 Routing,
37.6Gbps Switching FabricAT-x900-48FS
8 x XFP 10Gbps- Wirespeed 10Gbps Switching, 192Gbps
Switching FabricAT-10408XP
8 x XEM Bays2 high-speed
stackingWirespeed Layer 3 IPv4 and IPv6 Routing,
480Gbps Switching FabricAT-SBx908
1 x XFP 10Gbps XEM Module
- Fits XEM Bay AT-XEM-1XP
12 x SFP 1000X XEM Module
- Fits XEM Bay AT-XEM-12S
12 x 10/100/1000T XEM Module
- Fits XEM Bay AT-XEM-12T
2 x 15Gbps Stacking XEM Module
- Fits XEM Bay AT-XEM-STK
DC - 48VDC Hot Swappable PSU AT-PWR01-80
AC - AC Hot Swappable PSU AT-PWR01-00
••••••
85
Network Management
Software
AlliedView Network Management Software
For today’s complex networks,AlliedView-NMS allows users to manage all network components from the one user friendly screen. The AlliedView-NMS meets today’s business requirements for the control and operation of Allied Telesis family of routers, switches and media converters. The AlliedView-NMS will substantially decrease the time required for new deployments by having the ability to create and apply templates to devices and flow through provisioning. Using the extensive fault management and provisioning features of AlliedView-NMS, operators can easily monitor, maintain and secure the network through policy and audit trails.
FeaturesNetwork discovery and topology One touch installation Security management Fault management Configuration management Performance monitoring Inventory management VLAN provisioning and monitoring HP OpenView integration Database support – MySQL Oracle Network service provisioning
Description Part Number
Software, CD, NMS, release 9.0, single server, (evaluation only, requires license key)
AT-TN-NMS-R9-S
Software, CD, NMS, release 9.0, distributed server, (evaluation only, requires license key)
AT-TN-NMS-R9-D
License Key, NMS, single server AT-TN-NMS-SK
License Key, NMS, distributed server AT-TN-NMS-DK
License Key, NMS, upgrade from single to distributed server AT-TN-NMS-UK
License Key, NMS, 5000 node upgrade AT-TN-NMS-5K-UK
•••••••••••
Fibre Network
Interface Cards
Fibre NIC’s
Allied Telesis has the industry’s most comprehensive range of Network Interface Cards (NICs) enabling clients to connect over copper or fibre media to etworks running up to Gigabit speeds. The fibre interface cards are widely used in Government and Military sectors where the inherent security characteristics of optical fibre communications are highly valued.
FeaturesReliable, proven fibre Ethernet technology Scalable PCI interface provides dedicated I/O bandwidth for networking Selection of single and dual port Network Interface Cards Request details for other connector types MT-RJ, ST
AT-2931SX AT-2972SX/2
Description Bus Connectors Part Number
10Mbps Fibre PCI 1 x SC Fibre 10FL, 1 x Copper RJ45 10/100T
AT-2451FTX/SC
100Mbps Fibre PCI 1 x SC Fibre 100FX AT-2701FX/SC
100Mbps Fibre PCMCIA 1 x SC Fibre 100FX AT-2801FX/SC
100Mbps Fibre PCI-Express 1 x SC Fibre 100FX AT-2711FX/SC
1000Mbps Fibre PCI-x 1 x SC or LC Fibre 1000SX AT-2931SX
1000Mbps Fibre PCI-Express 1 x LC Fibre 1000SX AT-2972SX
1000Mbps Fibre Dual PCI-Express 2 x LC Fibre 1000SX AT-2972SX/2
••
••
86
Global Service & Support Program
Net.Cover® Service and Support Programs
Allied Telesis offers service and support programs to protect your network infrastructure investment. These services are designed to augment the coverage offered by Allied Telesis’ warranties.
Net.CoverNet.Professional Services Allied CampusLEEP ProgramStrategic Services
These service and support programs may not be available in all regions. Contact your local sales office for more information.
Net.Cover
Allied Telesis’ Net.Cover is a comprehensive service and support program designed to protect vital network systems from unscheduled downtime. This comprehensive service array includes features such as multi-level technical phone support, priority queuing, and advanced product replacement.
Net.Cover services include:24x7x365 phone support and priority queuing and escalationOnline knowledge base and Configuration assistanceSoftware updates with proactive change notification No out-of-warranty expensesNext business day advanced product replacement
Renewable Net.Cover contracts run for one, three or five years. Custom contracts are available upon request. Contact your local sales office for more information.
Allied Campus
Allied Telesis creates a wealth of training material designed to help its customers to better design, implement and maintain their networks. Courses are designed to cater for a range of technical ability and networking experience. Anyone who sells, installs, maintains or troubleshoots and supports Allied Telesis products will find these courses invaluable.
Each course incorporates a hands-on laboratory session with instructor led training in a comfortable environment that simulates real network issues. When you pass each course, you will receive a certificate that allows you to attend the more advanced courses or specialist courses, and gain easy access to Allied Telesis’ internal support engineers.
LEEP Program
The Legacy Enhanced Exchange Program (LEEP) lets customers keep up with emerging technologies and renew their warranty on End-of-Life equipment. Users with older, End-of-Life products who want to upgrade to the most current, compatible version should contact Allied Telesis’ services department to request a LEEP quote. Allied Telesis will replace your End-of-Life product with the newest release of fully-tested and certified refurbished hardware. This replacement comes with the full factory warranty, as well as a complimentary year of Net.Cover support.
Net.Professional Services
Allied Telesis has assembled a team of highly trained, experienced network engineers and project managers to help you design, integrate, deploy, and manage increasingly complex converged IP networks. Our engineering services encompass all aspects of network development, from network design and deployment, to management and integration. They use proven, tested gate and acceptance processes that ensure a smooth initial deployment, error free integration, and seamless change management.
Strategic Services
Because Allied Telesis own and control its own manufacturing facilities, they are able to offer a wide range of strategic services at a very reasonable cost.
Consignment Inventory
Consignment inventory is ideal if you have a very time sensitive roll-out schedule and cannot afford a long lead time and potential inventory outages.
Engineering Change Notifications
This service provides you with advanced notice of any component level change that may affect the qualification status of Allied Telesis products within your network.
Pre-delivery Configuration Services
By commissioning Allied Telesis to pre-load customized configurations at the factory level, they can dramatically reduce installation time in the field. This service is ideal if you anticipate a uniform configuration for your Allied Telesis equipment.
Custom Labelling and Insertions
Allied Telesis can apply custom labelling to your equipment and packaging. They can also include additional items such as custom installation guides, patch cables and marketing support material.
Firmware Revision Control
Allied Telesis offers firmware revision control if you want to keep all deployed units at the same code level. This is particularly necessary if network staff are trained on a specific version of firmware, or if you run customized configurations.
•••••
•••••
87
Section 6
Residential Cabling System
Residential Cabling System - 88
Network Distribution Enclosures - 88
Network Distribution Modules - 88
Network Distribution Cables & Connectors - 89
Patch Leads - 90
88
Residential Cabling System
The Madison Technologies Homeworx range of domestic intelligent cabling products has been designed to improve your lifestyle and provide you with more free time to do the things you enjoy by automating your most important investment – your home.
Homeworx is a complete centrally located residential structured cabling system that supports broadband internet, computer networking, telephone, analogue or digital television, video and security. Structured cabling also allows for the distribution of wireless access points for better coverage.
Madison Technologies provides you with flexibility to choose from a range of accessories designed to switch or extend the operational distances for analogue and digital entertainment products, and give you the ability to maximise your investment in structured cabling by making available a wide range of adaptors to run audio and video over your twisted pair wiring.
Small Office Home Office (SOHO) cabling facilities are well catered for by the Homeworx product range with central distribution enclosures and wall outlet configurations available to suit many requirements, whether it be at home or in the office.
The Network Distribution Enclosure is the heart of the Homeworx system and can be installed in almost any convenient location. Modules and cabling can then be added as desired, for structured cabling with RJ45, coaxial cabling, or specific cabling for today’s modern digital home entertainment systems. Installation of conduit within the home can further add value and allow for future upgrade of new cable type and connection media.
Network distribution
enclosures
Network Distribution Enclosures
Madison Technologies Homeworx Residential Cabling System offers 2 standard models of Network Distribution Enclosure. These allow modules to be fitted as needed to allow for varying customer needs and home layouts. For large installations multiple enclosures can be used.
FeaturesTwo sizesFlush or surface mountingCable or conduit entry portsHinged doorLockableMounting Plate option for special equipment
Part Number Description
MTSWB14 Network Distribution Enclosure 355mm (W) x 355mm (H) x 89mm (D)
MTSWB28 Network Distribution Enclosure 355mm (W) x 710mm (H) x 89mm (D)
MTSWP Universal Mounting Plate
••••••
Network distribution
Modules
Network Distribution Modules
Madison Technologies Homeworx Cabling System allows you to select from a number of Network Distribution Modules to fit in the Network Distribution Enclosure. These include switches for Ethernet Data Communications, RF video, Audio, Infra-red control and more. Custom modules can be arranged for newer digital video distribution technologies and connector types such as USB, DVI, HDMI and Optical Fibre.
Telephone Module
Part Number Description
MT101-302Distribution module for 6 telephones
and up to 4 incoming lines.
RJ45 Module
Part Number Description
MT101-303RJ45 Category 5e
8 port wiring module
MT101-603RJ45 Category 6
8 port wiring module
Ethernet Switch Module
Part Number Description
MT101304 5 Port 10/100 Ethernet switch
Powered Video Splitter Module
Part Number Description
MT101-314 Powered RF video splitter with
2 inputs and 6 outputs
Passive RF Splitter Module
Part Number Description
MT101-319Passive RF Splitter with 1 input and 4 outputs
RF Modulator Module
Part Number Description
MT101-306Composite Audio/Video input to RF
video output, single channel (ch 14-32)
DC Power Module
Part Number Description
MT101-308 15VDC input splits power to terminal blocks and F connectors
IR Receiver Distribution Module
Part Number Description
MT101310 Splits IR and power to 8 outputs
IR Hub Amplified
Part Number Description
MT101-309 Supplies power and IR signals to 4 emitter outputs
entry ports
89
Network Distribution Modules (Cont.)
IR Coax Emitter
Part Number Description
MT101-342 Powered coaxial to IR emitter
MT101-343 Passive coaxial to IR emitter
IR Emitter & Receiver
Part Number Description
MT101-340 Tabletop IR receiver
MT101-341 Dual IR emitter with self adhesive pads
Network distribution
Cables & Connectors
Category 5e
Category 5e Data Cable
For installation of premise type cabling requiring Category 5e type cables.
Part Number
No. of Pairs
Stranding Insulation Jacket Nom. OD
(mm)Max. Cap.
Unbal. pF/m
UTPL5E 4 Pair UTP 24AWG Solid BC Polyethylene F.R PVC 5.2 33
RJ45 Jacks
Suitable for Category 5e Data Cable
Suits White Black
Clipsal MT54501C MT54501CBK
HPM MT54501H MT54501HBK
Category 6
Category 6 Data Cable
For installation of premise type cabling requiring Category 6 type cables.
Part NumberNo. of Pairs
Stranding Insulation Jacket Nom. OD
(mm)Max. Cap.
Unbal. pF/m
UTPL6305RB 4 Pair UTP
Solid 23 AWGBC
Polyethylene PVC 7.0 100
RJ45 Jacks
Suitable for Category 6 Data Cable.
Suits White Black
Clipsal MT64501C MT64501CBK
HPM MT64501H MT64501HBK
RG6/U RG6/U Coaxial Cable - Quad Screen
Part Number
No. of Coax
Stranding Shielding Materials
Nom. OD (mm)
Nom. Imp. Ω
Nom. Vel. of Prop. %
Nom. Cap. pF/m
CC6QS 1 18 AWG
Solid
Bond Al Foil + Dual Al
Foil 7.56 75 84 53.2
RG6/U, Connector, Quad Screen
Suitable for RG6/U Coaxial Cable.
Part Number Connector Type These Connectors Suit
RWCF6Q F Type Male Garland CC6QS
RG59/U RG59/U, Analogue Coaxial Cable
Part Number
No. of
CoaxStranding Insulation
Shielding & Sheath Materials
Nom. OD
(mm)
Nom. Imp.
Ω
Nom. Vel. of
Prop. %
Nom. Cap.
pF/m
RW410123 1 23 AWG
SolidPE
BC Braid 95%
Shield & Black PVC
Jacket
6.15 75 66 67
RG59/U, Connector, Analogue only
Suitable for RG59/U Analogue Cable.
Part Number
Connector TypeThese
Connectors Suit
RWCF59 F Type Male Roadworx RW410123
Wall Plates
Description Part Number
Single 05DWP01
2 Gang 05DWP02
3 Gang 05DWP03
4 Gang 05DWP04
6 Gang 05DWP06
90
Wall Plate Inserts
Description Part Number
Wall Plates - Speaker Binding Post 05BCBP*
Blank Insert 05BCBL
RCA to ‘F’ 05BCFR
RCA to RCA 05BCSRR*
RCA to Solder Terminal 05BCRS*
‘F’ to ‘F’ Pay TV Approved 05BCFF3
‘F’ Female To Pal Female 05BCFPS
BNC TO BNC 05BCBBB
SVHS Female to SVHS Female 05BCSVHS
BNC Female to ‘F’ Female 05BCBF
Note: Replace * with Colour
Colour CodeRD = RedBK = Black WH = White BL = Blue G N= Green YL = Yellow
Speaker Cables
Part NumberNo. of Cond.
Stranding Conductor Max
DCR Ω/km Jacket
Nom. OD (mm)
RW500214 2 14 AWG Stranded 9.7 PVC
Black4.05 x 6.7
RW500216 2 16 AWG Stranded 15.7 PVC
Black3.65
x 5.95
RW500218 2 18 AWG Stranded 24.63 PVC
Black White
3.3 x 5.4
RW520213 2 13 AWG Stranded 7.7 PVC Clear 4.5 x 9.0
RW530214 2 14 AWG Stranded 7.98 PVC Black 9.0
RW510414 4 14 AWG Stranded 7.98 PVC Black 9.6
RW510412/14 4 2 x 12 AWG Stranded
and 2 x14 AWG Stranded4.98 PVC Black 10.6
Figure 8 Connecting Wires
For the wiring of electronic and allied equipment, extension speakers, security systems etc.
Part Number
Conductor(mm)
Area(mm2)
CurrentRating (A)
NominalO/D (mm)
Colours
TCW128 1/0.65 0.33 2.0 3.6 x 1.5 White
TCW138 138/0.20 4.34 25.0 9.0 x 4.5 Black
TCW1414 14/0.14 0.16 1.0 3.6 x 1.8 White with Black Trace
TCW14xx 14/0.20 0.44 2.5 4.0 x 1.8White with Black Trace, Grey
with Black Trace
TCW24xx 24/0.20 0.75 7.5 5.7 x 2.83 Plain & 14 Trace Colours
(240VAC Rated) ACA Approved
TCW350 350/0.20 11.00 50.0 13.0 x 6.5 Red with Black Trace
TCW84 84/0.20 2.64 15.0 9.0 x 4.3 Black with White Trace
TAW163 16/0.30 1.13 8.5 5.7 x 3.0 Black with White Trace
TAW263 26/0.30 1.84 10.0 6.5 x 3.0 White with Black Trace
TSCW24Twin Sheath
24/0.20.75 7.5 3.3 x 5.4 Blue or Black
Note: To nominate colour, replace xx with colour code. Contact customer service for other cable types and custom faceplate options.
Patch Leads
RJ45 Patch Leads
Madison Technologies category 5e and category 6 RJ45 patch leads are for interconnection between patch panels, outlets and equipment.
Length (m) Cat 5e Cat 6
0.5 MTEL45450.5XX* MT6L45450.5XX*
1.0 MTEL45451.0XX* MT6L45451.0XX*
1.5 MTEL45451.5XX* MT6L45451.5XX*
2.0 MTEL45452.0XX* MT6L45452.0XX*
3.0 MTEL45453.0XX* MT6L45453.0XX*
5.0 MTEL45455.0XX* MT6L45455.0XX*
10.0 MTEL454510.0XX* MT6L454510.0XX*
*Note: Replace XX in part number with one of the following for cable colour: BL=Blue, WH=White, RD=Red, YL=Yellow, GN=Green, GY=Grey
91
General Purpose Audio & AV Cables
Roadworx offers a range of pre assembled moulded style RCA cable assemblies for Audio and A/V applications.
Standard lengths are: 1m, 1.5m, 2m, 3m, 5m, and 10m
Part Number Description
RWCARCARCA**N Single RCA to Single RCA, Nickel
RWCARCARCA2**N Single RCA to 2 x RCA, Nickel
RWCARCARCAF20.3N Single RCA plug to 2 x RCA Socket, 0.3m, Nickel
RWCARCA2RCA2**N 2 x RCA Plugs to 2 x RCA Pugs, Nickel
RWCARCA2RCA2**G 2 x RCA Plugs to 2 x RCA Plugs, Gold
RWCARCA2TRS35**G 2 x RCA Plugs to 3.5mm Stereo TRS Plug, Gold
RWCARCA3RCA3**N 3 x RCA Plugs to 3 x RCA Plugs, Nickel
RWCARCA3RCA3**G 3 x RCA Plugs to 3 x RCA Plugs, Gold
RWCATRS35TRS35**N 3.5mm TRS Stereo Plug to 3.5mm TRS Stereo Plug, Nickel
Note: ** Denotes length in metres (Example: RWCARCARCA10)Please specify the length of cable when ordering
VGA
HD15 to HD15
Length Male to Female Male to Male
2m RWCAHD15MHD15F2.0G RWCAHD15MHD15M2.0G
3m RWCAHD15MHD15F3.0G RWCAHD15MHD15M3.0G
5m RWCAHD15MHD15F5.0G RWCAHD15MHD15M5.0G
10m RWCAHD15MHD15F10.0G RWCAHD15MHD15M10.0G
15m RWCAHD15MHD15F15.0G RWCAHD15MHD15M15.0G
20m RWCAHD15MHD15F20.0G RWCAHD15MHD15M20.0G
HD15 Male to 3 RCA Plugs
Length Gold
5m RWCAHDI5MRCA35.0G
HD15 to 5 x BNC type
Type Length Part No
HD15 Female to BNC Jacks 0.2m RWCAHD15FBNCF0.2G
HD15 Female to BNC Jacks 0.3m RWCAHD15FBNCF0.3G
HD15 Male to BNC Jacks 0.3m RWCAHD15MBNCF0.3G
HD15 Male to BNC Jacks 0.9m RWCAHD15MBNCF0.9G
HD15 Male to BNC Jacks 1.5m RWCAHD15MBNCF1.5G
HD15 Male to BNC Jacks 3.0m RWCAHD15MBNCF3.0G
HD15 Male to BNC plugs 0.3m RWCAHD15MBNCM0.3G
HD15 Male to BNC plugs 0.9m RWCAHD15MBNCM0.9G
HD15 Male to BNC plugs 1.8m RWCAHD15MBNCM1.8G
HD15 Male to BNC plugs 3.0m RWCAHD15MBNCM3.0G
HD15 Male to BNC plugs 5.0m RWCAHD15MBNCM5.0G
HDMI Cables
High definition multimedia interface cables
Type Length Part No
HDMI Male to Male, 19 Pin 1.5m RWCAHDMIM1.5
HDMI Male to Male, 19 Pin 3m RWCAHDMIM3.0
HDMI Male to Male, 19 Pin 5m RWCAHDMIM5.0
HDMI Male to Male, 19 Pin 10.0m RWCAHDMIM10.0
For Professional Broadcastor Audio & Video Solutions please refer to the Madison Technologies Broadcast & AV Solutions Guide or visit www.madisontech.com
Broadcast & AV Solutions Guide or v
92
93
Section 7
Tools, Test Equipment
& Consumables
Cleaning Products - 94
Epoxy - 94
Lapping Film - 94
Syringe - 94
Curing Oven - 94
Strippers - 94
Cutting Tools - 94
Strippers - 95
Optical fibre Scribe - 95
Slitters - 96
Crimpers - 96
Hand Polish Jigs - 98
Fusion Splicer - 98
OTDR - 98
Cleavers - 99
Cleaver Blades - 99
Fault Locators - 99
94
Termination Tools,
Consumables & Accessories
Cleaning Products
Connector Cleaners
Part Number Description Additional Details
MT8313 Connector Cleaner Optipop Connector Reel Cleaner c/w 14m tape
MT8314 Connector Cleaner Cartridge Optipop Connector Reel Cleaner Cartridge (14m)
MT8311 Connector Cleaner F1-7020C Connector Cleaner (20 ft.) Universal
MT8311RC Connector Cleaner Cartridge F1-7021C Replacement Cartridge
MT8313 MT8311
Kimwipes
Part Number Description Box Qty
MT8309 Kimwipes 280 Per Box
Iso Propyl Alcohol
Part Number Description Size
MT8308Iso Propyl
Alcohol500ml Bottle
Epoxy
Part Number Description Additional Details
MT8307 EpoxyHeat cure two-part blue Epoxy - 2gm package will prepare approx
25-45 connectors. Cure time is approx 1 Hr @ 65° C. (For hand polish only, 6-9 months shelf life)
MT8307C EpoxyHeat cure two part clear Epoxy - 2gm
(For machine polish - 6 months shelf life)
MT8306 Epoxy Loctite 680 - Anerobic Adhesive Hardener
MT8306P Epoxy Loctite 7649 - Primer
MT8307 MT8306 & MT8306P
Lapping Film
Part Number Description Additional Details
MT8305-003 A4 Lapping FilmF1-0109-03 Aluminium
Oxide 0.3μm Pk 25 sheets
MT8305-010 A4 Lapping FilmF1-0109-1 Aluminium
Oxide 1μm Pk 25 sheets
MT8305-030 A4 Lapping FilmF1-0109-3 Aluminium
Oxide 3μm Pk 25 sheets
MT8305-050 A4 Lapping FilmF1-0109-5 Silicon Carbide
5μm Pk 25 sheets
MT8305-150 A4 Lapping FilmF1-0109-15 Silicon Carbide
15μm Pk 25 sheets
Syringe
Part Number Description Additional Details
MT8315 Syringe/needlesPk of 5 x 3cc syringe / 0.9mm
FLAT TIPPED needle. Suits all popular connector types
Curing Oven
Part Number Description Additional Details
MT8326 Curing Oven
FP024 220V 150°C max Curing Oven. 24 Connector Capacity: FC, SC, ST, LC, MU. Dimensions 135W x 180D x 75H mm.
Reversible Block. Excludes Thermostat.
Strippers
Part Number Description Additional Details
MT8300 Clauss Fibre Stripper
WO-1225 Clauss Stripping Tool. Strips 900um buffer;
250um acrylate;Cuts 3mm jacket.
MT8301RDPrecision No-Nik Fibre
Stripper
NN203 No-Nik 200μm (Red Handle) Strips 250μm or 500μm Coating & 900μm
Buffer
MT8301BLPrecision No-Nik Fibre
StripperNN254 No-Nik 250μm (Blue Handle) Strips Loose Tube
Cutting Tools
Kevlar Cutter
Cut protective Kevlar strands in Optical fibre cable.
Features Hard-chromed serrated edges to easily cut through Kevlar Comfortable handles with large finger openings
Technical
Weight 57g
Length 197mm
Part Number Description Additional Details
1511 Kevlar Scissors Paladin 1511 Kevlar Scissors. Hard Chromed Serrated Edges
1510 Ceramic Blade Suits Paladin 1511 Kevlar Scissors
•• rge finger openings
95
Strippers
FiverOptic™ Stripper
Multi-functional Optical fibre stripper removes outer jacket, buffer only or buffer and acrylate from 2.0-3.0 mm cable.
Features Separate stripping cavities for each separate function Strips outer jacket from 2.0-2.4 mm, 2.8-3.0 mm and 2.0-3.0 loose tube Fibre Strips 900um buffer from loose buffer without removing acrylate Strips buffer and acrylate from 900/125um and 250/125um Fibre Rubber-embedded handles Locking handle for safe transport
Advantages Ergonomic design ensures optimum comfort, ease of use and prevents awkward wrist bends Precision, CNC-formed stripping areas for reliable, accurate strips Factory calibrated and locked so that it stays set
Technical
Weight 114g
Length 164.5mm
Part Number 1163
Economy Optical fibre Stripper
Handy stripper for 2-3 mm Optical fibre cable with a 125 um cladded core glass Fibre.
Features
Strips 2.0-3.0 mm Fibre jacket Strips 900 um buffer Strips 250 um acrylate
Technical
Weight 86g
Length (L x W x D) 127mm x 44mm x 13mm
Part number 1162 .1
Adjustable Jacket Stripper
Perfect tool for cutting jackets from a variety of Optical fibre cable.
Features V-opening in blade Adjust blades with a screwdriver for various size cables
Advantages
Economical tool for multiple cables Works with standard 30-10 AWG (.05-6mm2) wire in addition to Optical fibre cable
Technical
Weight 86 g
Length 127 mm
Part number 1161
••
••••
•
•
•
•••
••
••
Strippers (Cont.)
Part Number Description Additional Details
MT8300 Clauss Fibre Stripper
WO-1225 Clauss Stripping Tool. Strips 900um buffer;
250um acrylate;Cuts 3mm jacket.
MT8301RDPrecision No-Nik Fibre
Stripper
NN203 No-Nik 200μm (Red Handle) Strips 250μm or 500μm Coating & 900μm
Buffer
MT8301BLPrecision No-Nik Fibre
StripperNN254 No-Nik 250μm (Blue Handle) Strips Loose Tube
Same image as above except with Blue handle
Optical Fibre Scribe
Carbide tip Optical fibre scribe.
Features Pen-type scribe with screw-in carbide tip (non-reversible) Pocket clip Value-pricedOne-year warranty
Technical
Weight 57g
Length 133.4mm
Part number 1922.1
Part Number Description
MT8303Carbide Scribe CB-02 Carbide Scribe with reversable blade & blade cover
••••
96
Slitter
AM 25 and 35 Slitters
The original tool for slitting cable insulation from PVC, Teflon & THHN insulations. (Note: Not for polyethelene, polypropylene or XLP insulations).
Features Adjustable cutting depth for insulation up to .18” (4.5 mm) thick Blade storage in handle
Advantages
Laser-trimmed, stainless steel blade ensures precise slits and long use Blade swivels but remains centered for circular, longitudinal & spiral cutsIncludes two blades
Technical
Technical AM 25 AM 35
Weight 133g 141g
Length 135mm 140mm
Cable Diameter 4.5-25mm 25-35mm
Product Name Part Number
AM25 1820
AM35 1821
Replacement Blade 2109
Universal Slitter - 1822
Slit & strip round cables with .18” - 1.4” (4.5-35 mm) diameter.
Features
Adjustable cutting depth Laser-trimmed, stainless steel blades
Advantages
Eliminates need for 2 tools - works with .18” - 1.4” (4.5 - 35 mm) including 500-1200 MCM (240-600 mm2) power cables Cable supported during use Cable support arm can be used to pry off thick insulation Spare blade included Great tool for mid-point taps
Technical
Weight 200g
Length 145mm
Part Name Part Number
Universal Slitter 1822
Replacement Blade 2109
••
•
•
•
••
•
••
••
Crimpers
The 1600 Series is Paladin’s premium crimper family designed for theprofessional that demands superior quality & reliability. It is the most widely used tool amongst broadcast engineers and professional cable assembly companies. It supports more optical fibre, HDTV, industrial & electrical applications than the larger, more expensive tools.
FeaturesPrecision-calibrated crimp profilesFinest-quality tool steelLong-lasting tool that delivers over 75,000 crimp cyclesUltra-smooth, advanced ratcheting system with built-in safety releaseRugged, double-plated jaw design for increased life spanLifetime warranty
AdvantagesSmallest grip hand tool on the market with the longest life span availableTrue ergonomic rubber handles that are soft & won’t quickly wear out or breakLowest hand-force of the long-life crimp tools on the market without compromising superior crimp forceNo breakover hand force - the effort required by most crimpers to make the last click at the end of the cycle to complete the crimp - the tool does the work, not the brute force of your handInterchangeable die sets for coax, fibre optics and wire ferrules
Description Part Number
Crimp tool frame 1600
Replacement handles 1600.9
Thumb Screw (2) 2307
Fibre Die Sets for 1600
Tool and Die Part Number
Die Only Part Number
DescriptionCrimp Sizes (mm)
Connector Manuf.
1606 2044STII
4383/2.67/2.3Lucent ferrules & sleeves
(not for use on STII+ connectors)
1614 2664SMA/SMB/FC/BICONIC Fibre
5.41/4.52/3.83SMA/SMB/FC BICONIC/SC/ST
1668 2668SC & ST
3.05/3.48/4.833m, Suncall Fibre Source
•
••
•
•
•
•
•
•
•
•
s over
heting system
esign for increased
97
Crimpers (Cont.)
CrimpALL®/8000 Series Crimper
The 8000 Series CrimpALL® is designed with user satisfaction in mind. This world-class crimp tool is designed for superior comfort and east of use. It is an exceptional value and uses the same die sets as our 1300 Series crimpers.
FeaturesUltra-smooth, fully ratcheting crimp cycle with built-in safety releaseInterchangeable die sets of heat-treated steel for long lifeSoft, rubber-embedded handlesLong-lasting tool that delivers over 50,000 crimp cyclesRugged, double-plated jaw design to increase life span1o-year warranty
AdvantagesAngled head to prevent akward wrist bending during operationReduced hadle grip distance makes it easy for both small and large handsHigher crimp force produced with less hand force so hand doesn’t tire as quicklyNo breakover hand force - the effort required by most crimpers to make the last click at the end of the cycle to complete the crimp - the CrimpALL® does the work!Manufactured using the newest fine blanking technologiesEZI-Change™ die screws make changing dies quick and easy - no screwdriver required
Technical
Technical Weight Length
CrimpALL® Tool Frame 600g 250mm
Die Set 57g -
Product Name Part Number
CrimpAll ® Tool Frame 8000
Replacement EXI-Change die screws (2) 2303
Replacement fixed die screws 2306
Replacement Handles 8000.9
Fibre Die Sets for CrimpALL®/8000 Series Crimper
Tool and Die Part Number
Die Only Part Number
DescriptionCrimp Sizes (mm)
Connector Manuf.
8017 2652SMA/SMB/SFR/ST/SC
3.2/3.83/5.46/5.0/4.52Universal for sleeves and ferrules,
SC, FC, SMA
8018 2043SMA/FC
5.46/4.52/3.83Crimps ferrules and sleeves only,
SMA, FC
8019 2030SRF and SMF
4.83/4.06/3.35Crimps ferrules and sleeves AMP
(Tyco)
8020 2654Lucent Technologies ST II
4.83/2.67/2.3Crimps ferrules and sleeves Lucent
ST II
8037 26693M SC/FC-2
3.05/3.48/4.83Connectors with round crimp
3m SC/FC Type Fibre
8039 2685FC/SC/ST/LC/SMA/MT-RJ
3.83/4.52/LC/4.83
Crimps 3m, SC/ST & Lucent/Krone LC, SMA, FC, MT-RJ
LC RND dimension proprietary
8050 2695 AMP SC 2.0/2.5/3.0Connectors with round
crimp AMP SC
•
•
••
••
••
•
•
••
Crimpers (Cont.)
1300 Series Crimper
Paladin’s 1300 Series is the original interchangeable-die crimping system- all the rest are mere copies of our innovation. It continues to be the answer fr precision-crimping at an affordable price with over 45 dies sets available for the most popular connectors.
FeaturesFully-ratcheting cycle with built-in safety releaseInterchangeable die sets of heat-treated steel for long lifeEasy to use and maintainAvailable as complete tool with die set inserted or separate tool frame and individual dies setsFoam-lined case availabe to hold frame and 6 die sets together5-year warranty
AdvantagesEZI-Change™ die screws make changing dies quick and easy - no screwdriver requiredMost precise and tightest tolerances on die sets in the industrySix ratchet gear settings for optimum crimp performance.
Technical
Technical Weight Length
Crimp Tool Frame 296g 225mm
Die Set 57g -
Product Name Part Number
Crimp Tool Frame 1302
Replacement EXI-Change die screws (2) 2306
Replacement fixed die screws 2305
Replacement Handles 1300.9
1300 Crimp Case 901013
Fibre Die Sets for 1300 Series Crimper
Tool and Die Part Number
Die Only Part Number
DescriptionCrimp Sizes (mm)
Connector Manuf.
1362 2652SMA/SMB/SFR/ST/SC
3.2/3.83/5.46/5.0/4.52Universal for sleeves and ferrules,
SC, FC, SMA
1330 2043SMA/FC
5.46/4.52/3.83Crimps ferrules and sleeves only,
SMA, FC
1331 2030SRF and SMF
4.83/4.06/3.35Crimps ferrules and sleeves AMP
(Tyco)
1364 2654Lucent Technologies ST II
4.83/2.67/2.3Crimps ferrules and sleeves Lucent
ST II
1369 26693M SC/FC-2
3.05/3.48/4.83Connectors with round crimp
3m SC/FC Type Fibre
1375 2685FC/SC/ST/LC/SMA/MT-RJ
3.83/4.52/LC/4.83
Crimps 3m, SC/ST & Lucent/Krone LC, SMA, FC, MT-RJ
LC RND dimension proprietary
1390 2695 AMP SC 2.0/2.5/3.0Connectors with round crimp
AMP SC
••••
••
•
••
98
Hand Polish Jigs
Part Number Description Additional Details
MT8304-STSC Hand Polish Jigs
ST-PC & SC-PC PC Hand Polish Disk, (2.5
mm Dia) Free floating hard wearing stainless steel hand polishing pucks to suit most of the common connector
types
MT8304-MULC Hand Polish JigsS-MULC
MULC Hand Polish Disk, (1.25mm dia)
MT8304-MTRJ Hand Polish JigsS-MTRJ
MTRJ Hand Polish Disk
MT8304-AFC Hand Polish JigsS-AFC
FC/APC Hand Polish Disk
MT8304-ASC Hand Polish JigsS-ASC
SC/APC Hand Polish Disk
MT8304-ALC Hand Polish JigsS-ALC
LC/APC Hand Polish Disk
Fusion Splicer
Part Number Description Additional Details
MT8323Auto Core Alignment
Fusion Splicer
The OPT-4105 Fusion Splicer is an automatic core alignment splicer designed to handle most types of optical fibre with a minimum of user intervention. Extremely quick with a typical splice time of 9 secs the OPT-4105 is the perfect choice for both occasional user and the busy full time
operator. Includes Cleaver and Carry case.
OTDR
An optical time domain reflectometre (OTDR) is an optoelectronic instrument used to characterise an optical fibre.
An OTDR injects a series of optical pulses into the fibre under test. It also extracts, from the same end of the fibre, light that is scattered back and reflected back from points in the fibre where the index of refraction changes. (This is equivalent to the way that an electronic TDR measures reflections caused by changes in the impedance of the cable under test). The intensity of the return pulses is measured and integrated as a function of time, and is plotted as a function of fibre length. An OTDR may be used for estimating the fibre’s length and overall attenuation, including splice and mated-connector losses. It may also be used to locate faults, such as breaks.
Part Number Description Additional Details
MT8324.1Single Mode 24/24dB
PALM OTDR
The OPT-3302-A is full featured Single Mode 1310/1550 24/24dB palm sized OTDR. Being extremely small and lightweight makes this the ideal choice when size is important. With an excellent list of features
and specifications the 3302 OTDR is suited to both the occasional user and full time use applications.
MT8324.2Single Mode 32/32dB
PALM OTDR
The OPT-3302-C is full featured Single Mode 1310/1550 32/32dB palm sized OTDR. Being extremely small and lightweight makes this the ideal choice when size is important. With an excellent list of features
and specifications the 3302 OTDR is suited to both the occasional user and full time use applications.
MT8323.3Multimode 18/22dB
PALM OTDR
The OPT-3302-M is full featured Multimode 850/1300 18/22dB palm sized OTDR. Being extremely small and lightweight makes this the ideal choice when size is important. With an excellent list of features
and specifications the 3302 OTDR is suited to both the occasional user and full time use applications.
MT8325High Performance
Mini OTDR SM
Full featured portable SM OTDR. 3532 Single Mode module to 32/30dB Dynamic Range. USB Interface.
8-hour battery life. Touch Screen. 16000 sampling points. Read/Write Bellcore GR196 Format.
MT8325.1High Performance
Mini OTDR MM
Full featured portable Multimode OTDR. 8332 MM module to 32/24dB Dynamic Range. USB Interface.
8-hour battery life. Touch Screen. 16000 sampling points. Read/Write Bellcore GR196 Format.
PALM OTDR Mini OTDR
99
Cleavers
Part Number Description Additional Details
MT8318Manual Action Cleaver
CI-01-A Optical fibre Cleaver Multi-Action Version
MT8319Single Action
Cleaver
CI-02 Optical fibre Cleaver Single Action Version, Manual
Fibre Collector
MT8320Single Action MINI Cleaver
CI-03-B Optical fibre Cleaver Fibre Collector Attached
MT8321
Manual Action Angled Cleaver
CI-08 Optical fibre Angled Cleaver 6° - 8°. For Low
Optical Return Loss (ORL) Minimization
Cleaver Blades
Manufactured with the highest quality materials the Ilsintech range of replacement blades are designed and manufactured with long life in mind meaning more reliable and cost effective production for the operators.
Part Number Description Additional Details
MT8322Replacement
Cleaver BladesSuits the FUJIKURA CT
Series Cleavers
MT8322.1Replacement
Cleaver BladesSuits the FURUKAWA S
Series Cleavers
MT8322.2Replacement
Cleaver BladesSuits the SUMITOMO FC
Series Cleavers
MT8322.3Replacement
Cleaver BladesSuits the ILSINTECH
Cleavers
Fault Locators
Part Number Description Additional Details
MT83161mW Visual Fault Locator
VFL-250 1mw Visual fault locator - pen style - 8km range. WARNING: Dangerous light source. Includes Batteries.
MT831710mW Visual Fault Locator
VFL-1000 10mw Visual fault locator - pen style - 28 km range. WARNING: Dangerous Light Source. Includes Batteries
100
101
Section 8
Technical Reference
Cabling System Standards - 102
Limits to observe in Class D/Class E - 102
New Standard Cable Definitions - 106
Bending Radius - 107
Test Equipment Settings - 107
102
Cabling System Standards
The following lists the current standards in the field of cabling and their status.
Standard Description Status
ISO/IEC 11801 2nd edition: September 2002 , Class D2002 , Class E/F Information Technology – Generic Cabling for Customer Premises ratified
EN 50173-1: November 2002, Class D2002, Class E/F Information Technology – Generic Cabling Systems
Part 1: General Requirements and Office Areas ratified
ANSI/TIA/EIA 568B.1: December 2000 General Requirements ratified
ANSI/TIA/EIA 568B.2: May 2001, Cat 5e Balanced Twisted Pair Cabling Components ratified
ANSI/TIA/EIA 568B.2-1: June 2002 Category 6 Cabling ratified
ANSI/TIA/EIA 568B.3: April 2000 Telecommunications Cabling Standard
Optical Fibre Cabling Components Standard ratified
IEEE 802.3an 10G Base-T Task Force ratified
ISO/IEC 11801, ANSI/TIA/EIA 568B Category 6A, Category 7A Standard in draft JAN 2008
The standards listed above can be ordered online at the following website: www.cablingstandards.com
Today the only stable standard is IEEE. As soon as the standards ISO/IEC, EN or EIA/TIA have become stable drafts, they will be the reference.
Differences between class and category in today’s standards
ISO/IEC 11 801 2nd ed. and EN 50173 2nd ed. ( 2002 ) TIA/EIA B 568B.2 and TIA/EIA 568B.2 -1 ( 2002 )
Class D (100 MHz) Category 5e
Class E (250 MHz) Category 6
10GBase-T (500 MHz) Draft Category 6
Class F (600 MHz) N/A
Fibre channels have been divided in three classes of performance depending on minimum length over which applications are
supported: OF-300m, OF-500m, OF-2000m.
It is assumed that every single channel within an installation includes fibres of the same specification.
Component selection will be made based on channel length, application and possibly life of installation. Performance of a channel is based on
a single wave length.
Limits to observe in Class D / Class E
Class D2002 ISO/IEC 11801 2nd Edition: Sept. 2002
Permanent Link or CP Link Measured values at max. configuration
Frequency MHz] Return loss [dB] Attenuation [dB] NEXT [dB] PS NEXT [dB] ELFEXT [dB] PS ELFEXT [dB] ACR [dB] PS ACR [dB]
1 19 4.0 60.0 57.0 60.0 57.0 56.0 53.0
4 19 4.0 54.8 51.8 51.8 48.8 50.8 47.8
10 19 6.1 48.5 45.5 43.8 40.8 42.4 39.4
16 19 7.7 45.2 42.2 39.7 36.7 37.5 34.5
20 19 8.7 43.7 40.7 37.8 34.8 35.0 32.0
31.25 17.1 10.9 40.5 37.5 33.9 30.9 29.6 26.6
62.5 14.0 15.8 35.7 32.7 27.9 24.9 19.8 16.8
100 12.0 20.4 32.3 29.3 23.8 20.8 11.9 8.9
DC loop resistance [Ohm]: < 21Propagation delay: Frequency [MHz]: 1 ≤ f ≤ 100 Value [μs]: < (L/100)*(0.534 + 0.036/sqrt (f))+n*0.0025Delay skew: Frequency [MHz]: 1 ≤ f ≤ 100 Value [μs]: < (L/100)*0.045+n*0.00125Parameter: L = 90 m n = 3 plug connectors
103
Class D2002 ISO/IEC 11801 2nd Edition: Sept. 2002
Channel
Frequency [MHz] Return loss [dB] Attenuation [dB] NEXT [dB] PS NEXT [dB] ELFEXT [dB] PS ELFEXT [dB] ACR [dB] PS ACR [dB]
1 17.0 4.0 60.0 57.0 57.4 54.4 56.0 53.0
4 17.0 4.5 53.5 50.5 45.4 42.4 49.0 46.0
10 17.0 7.2 47.0 44.0 37.4 34.4 39.8 36.8
16 17.0 9.1 43.6 40.6 33.3 30.3 34.5 31.5
20 17.0 10.2 42.0 39.0 31.4 28.4 31.8 28.8
31.25 15.1 12.9 38.7 35.7 27.5 24.5 25.8 22.8
62.5 12.0 18.6 33.6 30.6 21.5 18.5 15.0 12.0
100 10.0 24.0 30.1 27.1 17.4 14.4 6.1 3.1 DC loop resistance [Ohm]: < 25Propagation delay: Frequency [MHz]: 1 ≤ f ≤ 100 Value [μs]: < 0.534 + 0.036/sqrt (f)+ 4*0.0025Delay skew: Frequency [MHz]: 1 ≤ f ≤ 100 Value [μs]: < 0.05
Class E ISO/IEC 11801 2nd Edition: Sept. 2002
Permanent Link or CP Link Measured values at max. configuration
Frequency [MHz] Return loss [dB] Attenuation [dB] NEXT [dB] PS NEXT [dB] ELFEXT [dB] PS ELFEXT [dB] ACR [dB] PS ACR [dB]
1 21.0 4.0 65.0 62.0 65.0 62.0 61.0 58.0
4 21.0 4.0 64.1 61.8 55.8 52.8 60.1 57.8
10 21.0 5.6 57.8 55.5 47.8 44.8 52.2 49.9
16 20.0 7.1 54.6 52.2 43.7 40.7 47.5 45.1
20 19.5 7.9 53.1 50.7 41.8 38.8 45.1 42.7
31.25 18.5 10.0 50.0 47.5 37.9 34.9 40.0 37.5
62.5 16.0 14.4 45.1 42.7 31.9 28.9 30.7 28.2
100 14.0 18.5 41.8 39.3 27.8 24.8 23.3 20.8
125 13.0 20.9 40.3 37.7 25.9 22.9 19.4 16.8
155 12.1 23.5 38.7 36.2 24.0 21.0 15.2 12.6
175 11.6 25.1 37.9 35.3 22.9 19.9 12.7 10.1
200 11.0 27.1 36.9 34.3 21.8 18.8 9.9 7.2
250 10.0 30.7 35.3 32.7 19.8 16.8 4.7 2.0
DC loop resistance [Ohm]: < 21Propagation delay: Frequency [MHz]: 1 ≤ f ≤ 250 Value [μs]: < (L/100)*(0.534 + 0.036/sqrt (f))+n*0.0025Delay skew: Frequency [MHz]: 1 ≤ f ≤ 250 Value [μs]: < (L/100)*0.045+n*0.00125Parameter: L = 90 m n = 3 plug connector
Class E ISO/IEC 11801 2nd Edition: Sept. 2002
Channel
Frequency [MHz] Return loss [dB] Attenuation [dB] NEXT [dB] PS NEXT [dB] ELFEXT [dB] PS ELFEXT [dB] ACR [dB] PS ACR [dB]
1 19.0 4.0 65.0 62.0 63.3 60.3 61.0 58.0
4 19.0 4.2 63.0 60.5 51.2 48.2 58.9 56.4
10 19.0 6.6 56.6 54.0 43.3 40.3 50.0 47.4
16 18.0 8.3 53.2 50.6 39.2 36.2 44.9 42.3
20 17.5 9.3 51.6 49.0 37.2 34.2 42.3 39.7
31.25 16.5 11.7 48.4 45.7 33.4 30.4 36.7 34.0
62.5 14.0 16.9 43.4 40.6 27.3 24.3 26.5 23.7
100 12.0 21.7 39.9 37.1 23.3 20.3 18.2 15.4
125 11.0 24.5 38.3 35.4 21.3 18.3 13.8 10.9
155.52 10.1 27.6 36.7 33.8 19.4 16.4 9.0 6.1
175 9.6 29.5 35.8 32.9 18.4 15.4 6.3 3.4
200 9.0 31.7 34.8 31.9 17.2 14.2 3.1 0.1
250 8.0 35.9 33.1 30.2 15.3 12.3 -2.8 -5.8
DC loop resistance [Ohm]: < 25Propagation delay: Frequency [MHz]: 1 ≤ f ≤ 250 Value [μs]: < 0.534 + 0.036/sqrt (f)+ 4*0.0025Delay skew: Frequency [MHz]: 1 ≤ f ≤ 250 Value [μs]: < 0.05
Limits to observe in Class D / Class E (Cont.)
104
New parameters needed for generic cabling
for the support of 10GBASE-T
Return loss limits for a channel at key frequencies
Frequency (MHz) 1.0 16.0 100.0 250.0 500.0
Minimum Return Loss (dB) 19.0 18.0 12.0 8.0 6.0
Note: Values of return loss at frequencies for which the measured channel insertion loss is below 3.0 dB are for information only.
Insertion loss limits for a channel at key frequencies
Frequency (MHz) 1.0 16.0 100.0 250.0 500.0
Maximum Insertion Loss (dB) 4.0 8.3 21.7 35.9 53.4
NEXT limits for a channel at key frequencies
Frequency (MHz) 1.0 16.0 100.0 250.0 500.0
Minimum NEXT (dB) 65.0 53.2 39.9 33.1 22.0
Note: Values of NEXT at frequencies for which the measured channel insertion loss is below 4.0 dB are for information only.
PSNEXT limits for a channel at key frequencies
Frequency (MHz) 1.0 16.0 100.0 250.0 500.0
Minimum PSNEXT (dB) 62.0 50.6 37.1 30.2 20.4
Note: Values of PSNEXT at frequencies for which the measured channel insertion loss is below 4.0 dB are for information only.
ACR limits for a channel at key frequencies
Frequency (MHz) 1.0 16.0 100.0 250.0 500.0
Minimum ACR (dB) 61.0 44.9 18.2 -2.8 -31.4
PSACR limits for a channel at key frequencies
Frequency (MHz) 1.0 16.0 100.0 250.0 500.0
Minimum PSACR (dB) 58.0 42.3 15.4 -5.8 -33.0
ELFEXT limits for a channel at key frequencies
Frequency (MHz) 1.0 16.0 100.0 250.0 500.0
Minimum ELFEXT (dB) 63.3 39.2 23.3 15.3 9.3
PSELFEXT limits for a channel at key frequencies
Frequency (MHz) 1.0 16.0 100.0 250.0 500.0
Minimum PSELFEXT (dB) 60.3 36.2 20.3 12.3 6.3
PSANEXT limits for a channel at key frequencies
Minimum PSANEXT dB
Frequency (MHz) 1.0 16.0 100.0 250.0 500.0
IL(250) = 35,9 dB; L=100m 82.0 70.0 62.0 56.0 51.5 For every pair
PSAELFEXT limits for a channel at key frequencies and lengths
Minimum PSAELFEXT dB
Frequency (MHz) 1.0 16.0 100.0 250.0 500.0
IL(250) = 35.9 dB; L=100m 77.9 53.8 37.9 29.9 23.9 For every pair
Propagation delay limits for a channel at key frequencies
Frequency (MHz) 1.0 16.0 100.0 250.0 500.0
Maximum Propagation Delay (μs) 0.580 0.553 0.548 0.546 0.546
Delay skew limits for a channel
Frequency (MHz) Maximum Delay Skew μs
1>f>500 0,050a
Note: a Calculation is based upon 0.045 + 4 × 0.00125
105
Optical Characterisitcs
Single Mode Fibres
G652 G652.d
(zero water peak)G655
(non-zero dispersion shifted)
Typical mode field diameter @1310nm @1550nm
9.2 ± 0.4μm 10.4 ± 0.5μm
9.2 ± 0.4μm 10.4 ±0.5μm
-8.4 ±0.6μm
Cladding diameter 125 ± 2 μm 125 ± 0.7μm 125 ± 0.7μm
Max mode field concentricity error 0.8 μm 0.5 μm 0.5 μm
Cladding non-circularity < 1% ≤ 1% ≤ 0.7%
Fibre coating diameter 250±10 μm 250±10 μm 250±10 μm
Attenuation @ 1310/1383/1550 nm (dB/km)
Zero dispersion Wavelength (nm)
Slope @ Zero Dispersion Wavelength (ps/nm2.km)
PMD (ps/km)
G652 0.35/NA/0.22 1300 -1324 0.092 0.1
G652.d (Zero Water Peak) 0.34/0.31/0.21 1302 -1322 0.090 0.1
G655 (NZDS) <0.4/<0.4/<0.22 0.05 (@ 1550 nm) 0.1
Multimode Fibres
62.5 μm (OM1) 50 μm (OM2) 50 μm (OM3)
Typical Core diameter (μm) 62.5 ± 2.5 50.0 ± 2.5 50.0 ± 2.5
Max Core-Clad Conc Error (μm) 1.5 1.5 1.5
Cladding diameter (μm) 125 ± 1 125 ± 1 125 ± 1
Fibre Coating Diameter (μm) 250 ± 10 250 ± 10 250 ± 10
Min G-Ethernet transmission distance at 850/1300 nm (m) 275/550 550/550 970/600
Fibre Type Attenuation
850 nm (dB/km) Attenuation
1300 nm (dB/km) Min Overfilled Bandwidth
850 nm (MHz.km) Min Overfilled Bandwidth
1300 nm (MHz.km) Numerical Aperture
62.5 μm (OM1) 3.0 1.0 200 500 0.275 ± 0.015
50 μm (OM2) 3.0 1.0 500 500 0.200 ± 0.015
50 μm (OM3) 3.0 1.0 1500 500 0.200 ± 0.015
106
New Standard Cable Definitions
International cabling standards will now expand the definitions for twisted pair data cables to better describe the actual construction of cable.
In the past data cables that were unshielded were simply known as Unshielded Twisted Pair (UTP) and shield cables known as either Foiled
Twisted Pair (FTP) or Screened Twisted Pair (STP, ScTP, PiMF or SSTP). Since it possible for a cable to have an overall screen or a foil (around
all the pairs) or an individual screen or foil (on each pair), or even a combination of either OR both, confusion existed about the real cable
description and construction. A shield can be made of a foil and/or a braided screen.
To simply the description of cables the expanded acronym for cables is now described in two parts; (XX define the cable/YYY define the pair)
Some examples of cable construction definitions on cable data sheets are:
U/UTP Data cable unshielded overall around the cable and unshielded on the pairs.
F/UTP Data cable foil shielded overall around the cable and unshielded on the pairs.
U/FTP Data cable unshielded overall around the cable and foil shielded on the pairs.
S/FTP Data cable braid screen shielded overall around the cable and foil shielded on the pairs.
SF/UTP Data cable braid screen plus foil shielded overall around the cable and unshielded on the pairs.
Some examples of sheath descriptions on cable data sheets are:
PVC Polyvinyl Chloride general purpose sheath typically for indoor applications.
PP Polypropylene material with higher strength characteristic. Can also be UV stable. Typically for outdoor applications.
PE Polyethylene material with strength and moisture resistance characteristic. Can also be gel filled. Typically for under
ground applications.
PUR Polyurethane material with resistance to humidity, oils & fats, non-alcoholic fuels, sea and waste water. Typically for
industrial applications.
LSZH Low Smoke Zero Halogen to limit toxins during combustion. Also can be known as LSOH or Halogen Free (HF)
FR Flame Retardant to resist combustibility.
LSFRZH Low Smoke Flame Retardant Zero Halogen to limit toxins during combustion and to resist combustion.
107
Bending Radius
In data sheets of cable manufacturers the bending radius is defined as a multiple of the outside cable diameter. (See extract from a data sheet
of a data cable below.) There are two relevant minimum bending radii: one for the laying of the installation cable and one for the installation
cable once it is installed (without mechanical load).
Recommended tempearture and cable tensile strenght are also in the example extract from a data sheet of a cable below.
Copper cable characteristics Temperature range
Radius In operation [°C] – 20 to + 75
Minimum bending radius during installation 8 x D Installation [°C] 0 to + 50
Minimum bending radius, installed 4 x D PVC IEC 60332-1
Copper cable tensile strength LSOH IEC 61034, IEC 60754-1, IEC 60332-1
Maximum tensile strength during installation [N] 100 @ (10 kg) Maximum tensile strength during installation Real10 [N] 80 @ (8 kg)
Fire load (Siamese cable)
Maximum tensile strength, installed no tension PVC [MJ/km] 276 (554)
Refer to cable manufacturer’s datasheet LSOH [MJ/km] 639 (1293)
The following bending radius result for copper installation cables:
Rule of thumb for the minimum bending radius
Category Installation Installed
Cat 5 50 mm 25 mm
Cat 6 60 mm 50 mm
Cat 7 70 mm 50 mm
Real10 U/UTP 70 mm 60 mm
108
Test Equipment Settings
Test equipment settings – appropriate test adapter for Class D2002/E/10 GbE
Fluke DSP 4000 Series:
Permanent Link: in principle, any one of the following three standards may be selected to test a Category 5e and 6 installation:
Class D2002/Cat 5e Class E/Cat 6
ISO 11801 Channel Class D2002 ISO 11801 Channel Class E
TIA Cat 5e Channel TIA Cat 6 Channel
EN 50173 Channel Class D2002 EN 50173 Channel Class E
10 GBase-T:
10 GBase-T Channel Class E 55-100[m]
10 GBase-T Channel Class E 0-55[m]*
* 10 GBase-T for existing Class E cabling up to 55 [m], no indication of PSANEXT conformity.
Fibre Measurement Settings:
ISO 11801 Optical fibre channel FTA 420 (OF-300/OF-500/OF-2000)
For MM 50/125um and 62,5/125um
ISO 11801 Optical fibre channel FTA 430 (OF-300/OF-500/OF-2000)
For SM 9/125um
Channel:
Class D2002/Cat 5e Class E/Cat 6ISO 11801 Channel Class D2002 ISO 11801 Channel Class ETIA Cat 5e Channel TIA Cat 6 ChannelEN 50173 Ch Class D2002 EN 50173 Ch Class E
Length restrictions for fixed cabling links
Length calculations for various generic cabling systems
The following table can be used to calculate the maximum length for fixed cable installations. The length of cable calculated
by the planner or installer for fixed cable installations must not be exceeded under any circumstances, even
for possible expansions. Note that if any maintenance work is required, different lengths of patch cables or connection
cables must not be used, otherwise error-free operation of the previously calculated transmission links cannot be
guaranteed.
When an optional consolidation point or a cross-connect panel or both are present, the 4 different cabling systems
must be differentiated.
System Figure Class D Channel using Cat 5e components Class E Channel using Cat 6 components Class F Channel using Cat. 7 components
Interconnect-TO A H = 109 – F X H = 107 – 3a - F X H = 107 – 2a - F X
Cross-Connect-TO B H = 107 – F X H = 106 – 3a - F X H = 106 – 3a - F X
Interconnect – CP-TO C H = 107 – F X – C Y H = 106 – 3a - F X – C Y H = 106 – 3a - F X – C Y
Cross-Connect – CP-TO D H = 105 – F X – C Y H = 105 – 3a - F X – C Y H = 105 – 3a - F X – C Y
H = maximum length for the fixed horizontal cabling (m)
F = combined length for the patch/connection cables, equipment/workplace side (m)
C = length of the CP cable (CP = consolidation point) (m)
X = the cable attenuation factor between stranded cable (UTP = 1.2 and STP = 1.5) and solid-conductor cable (installation
cables)
Y = the cable attenuation factor between stranded cable (CP – cable UTP = 1.2 and STP = 1.5) and solid-conductor cable
(installation cables)
When ambient temperature during operation is above 20°C, H must be reduced by 0.2% per °C for screened installations; for unscreened
installations the value is 0.4% for above 20°C – 40°C and 0.6% for > 40°C – 60°C a; this length reduction is to be used to provide a margin for
attenuation differences at high frequencies.
Flexible cables have a higher attenuation (UTP = multiplication factor 1.2 and STP = multiplication factor 1.5) than installation cables.
109
Restrictions:The physical length of the permanently installed (if no CP cable is present) installation cable, permanent link, may not exceed the maximum length of 90m.The physical length of the channel may not exceed the maximum length of 100 m.The consolidation point (CP) must be at least 15m away from the floor distributor.If a MUTO (multi-user terminal outlet) is used, the workplace connection cables must not be longer than 20m.Patch and connection cables may not be longer than 5 m.
Sample calculations for a permanently installed cabling link:
Screened Cat 5e installation (STP) at normal temperature
Figure A H = 109 - FX -> 109 m – ( 5m + m ) x 1.5 = 94m
The maximum allowed fixed cable link would theoretically be 94m, but must be reduced to 90m to comply with the
standards.
Unscreened Cat 6 installation (UTP) at 35°C ambient temperature
Figure C H = 106 – 3 a –FX – CY -> 106m – 3 m- (5m+ 5m) x 1.2) – (15m x 1.2) = 73m
35°C – 20°C = 15°C
15 x 0.4% = 6%
73m x (1- 0.06) = 69 (68.7m)
For this project a maximum length of 69m of fixed cabling is permitted, with a maximum 15m CP cable and a connection
cable length of maximum 5m.
Optical fibre Channel Attenution
Class OF-300 Channel supports a defined application over a minimum length of 300m
Class OF-500 Channel supports a defined application over a minimum length of 500m
Class OF-2000 Channel supports a defined application over a minimum length of 2000m
Channel Attenuation (dB)
Channel Multimode Singlemode
850 nm 1300 nm 1310 nm 1550 nm
OF 300 2,55 1,95 1,80 1,80
OF 500 3,25 2,25 2,00 2,00
OF 2000 8,50 4,50 3,50 3,50
•
••••
•
•
•
•
•
110
FO channel 1
“Direct“ combined channel add test interface points
FO channel 2
“Direct“ combined channel add test interface points
FO channel 3
“Patched” combined channel
Optical Fibre Power Loss Budget
Question: How do I calculate the power loss budget for my fibre channel?
Solution: The link attenuation (Optical Power Loss) must be calculated for each fibre cabling run. Copper testing is much
easier as the limit line is the same regardless of length.
Allowable lossConnector : 0.75 dBSplice : 0.3 dBCable @ 850nm : 3.5 dB / kmCable @ 1300nm : 1.0 dB / km
Assuming a 50m link had two connectors and a splice and we decide to measure at 850nm, the affordable power
loss budget would be calculated in the following way.
Connector 0.75 dB
Cable @ 850nm 0.175 dB (3.5dB/km)
Splice 0.3 dB
Connector 0.75 dB
Power Loss Budget 1.975 dB
Gigabit Ethernet, which has a loss requirement of 3.25 dB, assumes that the connector loss is less than 0.75 dB, and
hence the standard reflects typical losses of 0.5 dB for the connector.
Summary:
Do not accept a Power Loss Reading without a calculated Power Loss Budget. For certification to ANSI/TIA/EIA 568-
B, ISO/IEC 11801 and EN50173, you must test at both wavelengths in one direction and record the allowable loss
budget.
Mandrel Wraps
Mandrel wraps are recommended for multimode optical fibre measurements. You will eliminate the high order modes
coming from the LED light source and thus measure only the low order modes which run in the centre of the fibre.
This measurement will be repeatable. Find below the correct mandrel wrap to choose for the various multimode fibres.
Fibre core size Mandrel diameter for buffered fibre (mm) Mandrel diameter for 3mm jacked fibre (mm)
50/125um 25 22
62.5/125um 20 17
••••
111
112
Glossary Of Terms
Acceptance Angle — Angle over which the core of an optical fibre accepts incoming light; usually measured from the fibre axis. Related to numerical aperture (NA).
ACR — Attenuation Crosstalk Ratio. The difference between attenuation and crosstalk, measured in dB, at a given frequency. Important characteristic in networking transmission to assure that signal sent down a twisted pair is stronger at the receiving end of the cable than are any interference signals imposed on that same pair by crosstalk from other pairs.
Adaptor — A device enabling different sizes or types of plugs to mate with one another or to fit into a telecommunications outlet.
Aerial Cable — Cables strung outside and overhead.
Analogue Signal — An electrical signal which varies continuously, not having discrete values. Analogue signals are copies or representations of other waves in nature. An analogue audio signal, for instance, is a representation of the pressure waves which make up audible sound.
Armouring — Protective layer, usually metal, wrapped around a cable.
Aramid Yarn — A strength element added to cable to provide strength, support and protection to fibre bundles.
Attenuation — Reduction or loss of signal energy occurring during transmission over telecommunications lines and equipment. Normally measured in decibels. With respect to a LAN, attenuation prevents successful communication when cable lengths exceed their maximum allowable distance. Optical fibre attenuation (“dimming” of the light) is usually measured in decibels per kilometre.
Attenuation Crosstalk Ratio (ACR) — the difference between attenuation and crosstalk, measured in decibels (dB), at a given frequency. Important characteristic in networking transmission to assure that signal sent down a twisted pair is stronger at the receiving end of the cable than are any interference signals imposed on that same pair by crosstalk from other pairs.
Attenuator — Optical element that reduces (attenuates) the intensity of light passing through it.
AWG — American Wire Gage. A wire diameter specification. The smaller the AWG number, the larger the wire diameter.
Axis (Optical Fibre) — Centre of an optical fibre.
Backbone Cabling — The portion of a Structured Cabling System that interconnects the entrance facilities, equipment rooms and telecommunications rooms.
Backbone Network — Transmission network carrying high-speed telecommunications between branching points of a LAN.
Backscattering — Scattering of light in a direction opposite to the direction in which the light was originally travelling.
Bandwidth — The capacity of available frequencies of a telecommunication channel. The greater the bandwidth, the greater the information-carrying capacity in a given period of time. Frequency is measured in cycles per second (Hertz).
Bend Radius — The smallest bend that may be put into a cable under a stated pulling force.
Braid — A group of textile or metallic filaments interwoven to form a tubular flexible structure which may be applied over one or more wires or flattened to form a strap.
Breakout Cable — Optical Fibre cable where each fibre is protected with an additional plastic coating for protection.
Broadband — The technique used to multiplex multiple networks on a single cable without interfering with each other. Technologies that allow you to transmit or receive higher volumes of data at higher speeds.
Cable — An assembly of one or more conductors (copper or optical fibre) within a surrounding sheath used for transmission of information.
Cable Assembly — A completed cable and its associated hardware (e.g. connector).
Calibration — To ensure proper results, the calibration is a way of verifying test equipment against a reference.
Campus Environment — A multiple building environment.
Capacitance — The ability of a dielectric material between conductors to store energy when a difference of potential exists between the conductors. The unit of measurement is the farad. Cable capacitance is usually measured in picofarads (pF).
Chromatic Dispersion — Dispersion of the receiving light caused by a range of wavelengths reaching the receiver at various times.
Cladding — Layer of glass (or other transparent material) surrounding the light-carrying core of an optical fibre. Has a lower refractive index than the core, thus confining the light.
Cleaver — A device that cuts an optical fibre in a flat, smooth and perpendicular manner.
Conductor — A substance, usually metal, used to transfer electrical energy from point to point.
Connector (Optical Fibre) — Device mounted on the end of an optical fibre cable, light source, receiver or housing to mate to a similar device in order to couple light into and out of optical fibres. Joins two optical fibre ends or one fibre end and light source or detector.
Converter — An active equipment that changes and regenerates the signal received from one media type and transmitted onto a different media type.
Core — Central part of an optical fibre that carries light.
Coupling — The transfer of light into or out of an optical fibre.
Crimp — Act of compressing (deforming) a connector ferrule around a cable in order to make an electrical connection.
Critical Angle — Angle at which light undergoes total internal reflection.
Cross Talk — A magnetic or electrostatic coupling which causes the unwanted transfer of energy from one circuit (disturbing circuit) to another circuit (disturbed circuit).
Cut-Off Wavelength — The shortest wavelength at which a single-mode fibre carries only one mode.
Dark Fibre — Fibre installed but not in use, often to offer expansion for future growth. May or may not be terminated.
Decibel (dB) — A standard unit for expressing transmission gain or loss and relative power levels. Logarithmic comparison of power levels. One tenth of a Bel.
Demarcation Point — It is a point where the ownership changes. Usually, it is the point where the service provider service end and the customer service starts.
Digital Signal — An electrical signal which possesses two distinct states (on/off, positive/negative).
Diode — Electronic device allowing current to flow in only one direction. Includes light emitters (LEDs and lasers) and detectors (photodiodes).
Dispersion-Shifted — Optical fibre designed to have its nominal zero-dispersion point at 1550 nm rather than 1300 nm in step-index single-mode optical fibre.
Drain Wire — A non-insulated wire in contact with parts of a cable, usually the shield, and used in the termination to that shield and as a ground connection.
Duplex — Transmission in either direction, at the same time.
Duplex Cord — Two fibre patch lead or cord.
EMI (Electromagnetic interference) — Noise generated when stray electromagnetic fields induce currents in electrical conductors.
Equipment Cable — Cable that interconnects telecommunications equipment and distribution or feeder connection hardware.
Erbium-Doped Fibre Amplifier — Optical fibres doped (treated) with the rare-earth element erbium, and able to amplify light in the 1550 nm region when pumped by an external light source.
F/UTP — Data cable foil shielded overall around the cable and unshielded on the pairs.
Ferrule — Tube with an optical fibre connector with a central hole that contains and aligns a fibre.
FDDI (Fibre Distributed Data Interface) — A standard for a 100 Mb/s optical fibre Local Area Network.
Fibre To The Curb — Optical fibre service to a node that is connected by wires to several nearby homes, typically on a block.
Flame Resistance — The ability of a material not to fuel a flame once the source of heat is removed.
FR — Flame Retardant to resist combustibility.
Frequency — The number of alternations (cycles) completed by an alternating current in one second.
Full Duplex — Simultaneous sending and receiving of signal in the same medium.
Fusion Splice — It is a permanent joint created by applying sufficient heat to fuse or melt the end of two optical fibres together.
Graded-Index Fibre — Optical fibre in which the refractive index changes gradually with distance from the fibre axis.
Gigabit Ethernet — Ethernet LAN operating at 1000 Mb/s.
Ground — An electrical connection or common conductor that, at some point, connects to the earth.
Half Duplex — A circuit designed for data transmission in both directions but not at the same time.
Hertz — A unit of frequency equals to one cycle per second.
IDC — Insulation Displacement Connector. Type of connector where contact is made to the cable conductor(s) by cutting through the individual conductor’s insulation. The conductor does not need to have its insulation removed prior to connection. Flat cable often uses IDCs to simultaneously connect all conductors.
Impedance — The total opposition that a circuit offers to the flow of alternating current or any other varying current at a particular frequency.
Index-Matching Gel — A gel or fluid with a refractive index close to that of glass, reducing refractive-index discontinuities that may cause reflective losses in optical fibre systems.
Insertion Loss Deviation — It is the total power of the reflection of the reflected signal added to the total mismatch losses of a signal. This affects the signal at high frequencies (> 200 MHz).
Insulation — A material that does not conduct electricity and is suitable for use in coating or surrounding conductors to prevent the loss of current.
Interconnection — A connection method that directly connects different cabling without the use of a cross-connection.
113
Jack — A connecting device into which a plug can be inserted to make circuit connections. The jack may also have contacts which open or close to perform switching functions when the plug is inserted or removed.
Jacket — The protective and insulating housing of a cable.
Kevlar — Strong synthetic material used in cable strength members. Trademark of the DuPont Company.
LAN — Local Area Network. A data network connecting any number of users, intended to serve a small area. A group of computers and associated devices that shares a common communications line and typically shares the resources of a single processor or server within a small geographic area.
Laser — Device generating coherent electromagnetic radiation as ultraviolet, visible or infrared regions of the spectrum.
Laser light is directional, covering a narrow range of wavelengths and is more coherent than ordinary light. Semiconductor diode lasers are the standard. (Light Amplification by Stimulated Emission of Radiation).
Launch Cable — Optical fibre cable used to condition the launch of the optical time domain reflect meter test signal so that the correct results will be obtained.
Light — Strictly speaking, electromagnetic radiation visible to the human eye at 400 to 700 nm. Commonly, electromagnetic radiation with properties similar to visible light, including the invisible near-infrared radiation in most optical fibre systems.
LED (Light Emitting Diode) — Semiconductor diode used for light emission in optical fibre systems.
Loose Tube — Protective tube loosely surrounding a cabled fibre, often filled with gel.
Loss — Drop in signal between two points on a network. Attenuation of the signal normally measured in decibels.
Loss Budget — An accounting of overall attenuation in an optical fibre system.
LSFRZH — Low Smoke Flame Retardant Zero Halogen to limit toxins during combustion and to resist combustion.
LSZH — Low Smoke Zero Halogen to limit toxins during combustion. Also can be known as LSOH or Halogen Free (HF).
Macrobending — Large bends in an optical fibre allowing light to leak out and leading to large losses. Corrected by straightening the fibre.
Margin — Allowance for attenuation in addition to that explicitly accounted for in the system design.
Material Dispersion — Dispersion in optical fibre transmissions caused by variation of a material’s refractive index with wavelength.
Mechanical Splice — Splice where optical fibres are joined mechanically (glued or crimped in place) but not fused together.
Microbending — Tiny bends or kinks in a fibre allowing light to leak out and increase losses.
Modal Dispersion — Dispersion of the receiving light caused by the light taking different paths to reach the receiver.
Mode (Optical Fibre) — The path taken by a light wave as it travels through multimode optical fibre.
Mode Field Diameter — Diameter of the one mode of light in a single-mode fibre, typically slightly larger than the core diameter.
Mode Stripper — Device that removes high-order modes in multi-mode fibre to give standard measurement conditions. Removes modes that would otherwise disappear along a longer length of the fibre.
Multimode — Transmits or emits multiple modes of light.
Multiplex — Simultaneous transmission of two or more signals over a signal channel.
Nanometre (nm)— A measure of length equaling 10-9 m. One billionth of a meter.
Network — System of cables and/or other connections linking multiple computing devices that can communicate and share resources with each other.
Numerical Aperture — The light gathering ability of an optical fibre. The maximum angle to the optical fibre axis at which light will be accepted and propagated through the fibre.
Ohm — The unit of electrical resistance. The value of resistance through which a potential difference of one volt will maintain a current of one ampere.
Ohm’s Law — Stated E=IR, I=E/R or R=E/I. The current I in a circuit is directly proportional to the voltage E, and inversely proportional to the resistance R.
OM1 — Classification for standard grade 62.5/125 multimode fibre.
OM2 — Classification for standard grade 50/125 multimode fibre.
OM3 — Classification for laser optimised 50/125 multimode fibre.
Optical Amplifier — Device amplifying an input optical signal without converting it into electrical form.
Optical Fibre — Any filament or fibre made of dielectric materials (in the telecommunications field, often made of glass) and used to transmit laser- or LED-generated light signals. Usually consists of a core, which carries the signal, and cladding, which surrounds the core and serves to reflect the light back into the core.
Optical Fibre Cable — An assembly consisting of one or more optical fibres with strengthening material and an outer jacket.
Optical Cross-Connect — A cross-connect system used for circuit administration. It provides for the connection of any equipment fibre to any distribution fibre using fibre patch cords.
Optical Interconnect — An optical administration field that provides for the direct connection of equipment Fibres to distribution fibres.
OS1 — Classification for standard grade 9/125 singlemode fibre.
OTDR (Optical Time Domain Reflectometer) — Instrument measuring transmission characteristics by sending a short light pulse down a fibre and observing backscattered light.
Patch Cord — A length of stranded copper wire (or optical fibre) cable with connectors at each end to join telecommunications circuits at a cross-connect point.
Photodiode — Diode that produces an electrical signal proportional to the amount of light falling on it.
Pigtail — A cable with a connector on one end only. Also known as Modular Cord single ended.
Polyethylene (PE) — A thermoplastic material having excellent electrical properties. Low dielectric constant, a stable dielectric constant over all frequencies, very high insulation resistance. In terms of flexibility, polyethylene can be rated stiff to very hard, depending on molecular weight and density — low density being the most flexible and the high-density, high-molecular weight formulation being very hard. Moisture resistance is rated excellent.
Polypropylene (PP) — A thermoplastic similar to polyethylene but stiffer and having a higher softening point (temperature). This material is primarily used as an insulation material. Typically, it is harder than polyethylene. This makes it suitable for thin wall insulations. The dielectric constant is 2.25 for solid and 1.55 for cellular designs.
Polyvinyl Chloride (PVC) — A general purpose thermoplastic used for wire and cable insulation and jackets.
Preform — Cylindrical rod of specially prepared and purified glass from which an optical fibre is drawn.
Pulling Tension — The force that can be applied to a cable without affecting the mechanical or transmission performance of the cable.
Pulse Dispersion — The spreading out of pulses as they travel along an optical fibre.
PUR — Polyurethane material with resistance to humidity, oils & fats, non-alcoholic fuels, sea and waste water. Typically for industrial applications.
Rack Unit (RU) — A rack unit is a measurement of height equal to 1.75”or 44.5mm.
Radiation-Hardened — Specially treated optical fibre made insensitive to the effects of nuclear radiation, usually for military applications.
Rays — Straight lines that represent the path taken by light.
Receiver — A device that receives signals.
Reflection — It is when a signal changes direction as it travels from one material into a dissimilar material.
Refraction — Bending of light as it passes between materials of different refractive index.
Refractive Index — Ratio of the speed of light in a vacuum to the speed of light in a material.
Resistance — In DC circuits, the opposition a material offers to current flow, measured in ohms. In AC circuits, resistance is the real component of impedance, and may be higher than the value measured at DC.
Return Loss — It is a ratio of the power of the outgoing signal to the power of the reflected signal.
Riser Cable — Main distribution cable segments running between floors or sections of a building. More correctly known as backbone cable.
RJ45 — Modular telecommunications connector.
S/FTP — Data cable braid screen shielded overall around the cable and foil shielded on the pairs.
SF/UTP— Data cable braid screen plus foil shielded overall around the cable and unshielded on the pairs.
Sheath — Outer protective layer of a cable.
Shield — A tape, serve or braid (usually copper, aluminum or other conductive material) placed around or between electric circuits or cables or their components, to prevent signal leakage or interference.
Shield Effectiveness — The relative ability of a shield to screen out undesirable interference or prevent signal leakage out of the cable. Frequently confused with the term shield coverage.
Simplex — Operating a channel in one direction only with no ability to operate in the other direction.
Simplex Cord — Single fibre patch lead or cord.
Single Mode — An optical fibre that allows transmission of light at only one wavelength or mode.
Splice — A “permanent” junction between two of the same type media.
Step-Index — Abrupt change in refractive index between core and cladding of an optical fibre.
STP — Shielded Twisted Pair(s).
114
Index
Part Number Page
05BCBBB 90
05BCBF 90
05BCBL 90
05BCBP* 90
05BCFF3 90
05BCFPS 90
05BCFR 90
05BCRS* 90
05BCSRR* 90
05BCSVHS 90
05DWP01 89
05DWP02 89
05DWP03 89
05DWP04 89
05DWP06 89
11010001 71
11010002 71
11010010 71
11180108 72
11180109 72
11180111 72
11180120 72
11180121 72
11180122 72
11180123 72
11180124 72
11280032 72
11280034 72
11280047 71
11290007 71
11290008 71
11340007 70
11340008 70
11412001 70
11412002 70
11412003 70
11412004 70
11412005 70
11412006 70
11412007 70
11412008 70
11412009 70
11412010 70
11412011 70
11412012 70
11412013 70
11412079 70
11412083 70
11412095 70
11412099 70
11412103 70
11412187 70
11480024 72
1161 95
1162 .1 95
Part Number Page
1163 95
11820016 71
11820017 71
11820020 71
11820027 71
11820028 71
11820031 71
11820041 71
11890005 72
11920001 72
11920006 72
11920022 72
1300.9 97
1302 97
1330 97
1331 97
1362 97
1364 97
1369 97
1375 97
1390 97
1510 94
1511 94
1583A 0061000 54
1583A 006U1000 54
1583A 0091000 54
1583A 009U1000 54
1600 96
1600.9 96
1606 96
1614 96
1668 96
1797B 67
1820 96
1821 96
1822 96
1872A 0061000 53
1872A 006A1000 53
1872A 0091000 53
1872A 009A1000 53
1922.1 95
2019-CLSH-1U300 75
2019-CLSH-2U300 75
2019-CLSH-2U350 75
2019-CLSH-2U400 75
2019-CLSH-2U450 75
2019-CLSH-3U300 75
2019-CLSH-3U350 75
2019-CLSH-3U400 75
2019-DRW-2RU400 75
2019-DRW-3RU400 75
2019-DRW-4RU400 75
2019-FAN-1RU 76
2019-FANTR-1U/6 76
2019-SH-400TEL 75
Part Number Page
2019-SH-450TEL 75
2019-SH-700TEL 75
2019-SH-KBRD 75
2030 97
2043 97
2044 96
2109 96
2109 96
22208010 53
22208067 53
22208231 53
22208235 53
22208250 53
22208253 53
22208260 53
22208265 53
22208270 53
2303 97
2305 97
2306 97
2307 96
23370115 55
24501858 54
24501877 54
24501897 54
24501906 54
24566315 54
24566345 54
24566915 54
24566945 54
24568005 54
24570161 54
24570521 53
24576125 54
24577B15 53
24816395 53
24826395 53
2652 97
2654 97
2668 96
2669 97
2685 97
2695 97
31110009 71
31110018 71
31110019 71
31110020 71
31180013 71
31180014 71
31180015 71
319049 49
319050 49
319051 49
319052 49
319053 49
Part Number Page
31110028 71
31110029 71
31110030 71
31110033 71
31110034 71
31110035 71
319054 49
319055 49
319056 49
319065 49
319066 49
35800022 71
6417-2-055-01 15
70100390 65
70101714 65
70102419 65
70102420 65
70102447 65
7814A 54
8000 97
8000.9 97
8017 97
8018 97
8019 97
8020 97
8039 97
8050 97
901013 97
A0266828 55
A0270164 56
A0270165 67
A0270166 67
A0270168 56
A0270169 55
A0276394 57
A0276396 57
A0277853 56
A0277854 56
A0284798 56
A0285986 57
A0316446 64
A0318904 64
A0335015 64
A0340836 56
A0340838 57
A0352331 56
A0390851 63
A0393146 55
A0394328 64
A0394330 64
A0394331 64
A0403634 63
A0403641 63
A0405255 58
A0405256 58
115
Part Number Page
A0405257 58
A0405258 58
A0405339 66
A0405538 66
A0406995 66
A0406996 66
A0406997 66
A0406998 66
A0406999 66
A0407000 66
A0407001 66
A0407002 66
A0407003 66
A0407004 66
A0407005 66
A0407006 66
A0407007 66
A0407008 66
A0407009 66
A0407010 66
A0408829 63
A0408835 63
A0410469 60
A0410471 60
A0410473 60
A0410475 60
A0410493 60
A0410494 60
A0410495 60
A0410496 60
A0410497 60
A0643205 66
A0643206 66
A0643207 66
A0643208 66
A0645273 58
A0649254 66
A0649869 64
ACC-CANT/SH-BKT 75
ACC-FIX-KIT 76
ACC-FIX-KIT-BLACK 76
AT-10408XP 84
AT-2451FTX/SC 85
AT-2701FX/SC 85
AT-2711FX/SC 85
AT-2801FX/SC 85
AT-2931SX 85
AT-2972SX 85
AT-2972SX/2 85
AT-8000GS/24 84
AT-8000GS/48 84
AT-8000S/24 84
AT-8000S/24POE 84
AT-8000S/48 84
AT-8000S/48POE 84
AT-9924SP 84
AT-9924T 84
Part Number Page
AT-CM212A/1 82
AT-CM212B/1 82
AT-CM2K0S 82
AT-CM70S 82
AT-CV1000 81
AT-CV102 82
AT-CV102/1 82
AT-CV1200 81
AT-CV1200PSU 81
AT-CV1KSS 82
AT-CV5000 81
AT-CV5M01 81
AT-CV81S 82
AT-CVFAN 81
AT-FS202 83
AT-FS202SC/FS1 83
AT-FS238A/1 83
AT-FS238B/1 83
AT-FS708/POE 83
AT-FS709FC 83
AT-FS716L 83
AT-FS717FC 83
AT-FS724L 83
AT-FS750/16 84
AT-FS750/24 84
AT-FS750/24POE 84
AT-FS750/48 84
AT-G8BD13 81
AT-G8BD14 81
AT-G8LX10 81
AT-G8SX-01 81
AT-G8T 81
AT-GS2002/SP 83
AT-GS8000/24POE 84
AT-GS900/16 83
AT-GS900/24 83
AT-GS900/5 83
AT-GS900/8 83
AT-GS900/8POE 83
AT-GS950/16 84
AT-GS950/24 84
AT-GS950/48 84
AT-GS950/8 84
AT-MC1001 82
AT-MC1004 82
AT-MC1008/GB 82
AT-MC1008/SP 82
AT-MC103XL 82
AT-MC102XL 82
AT-MC104XL 82
AT-MC116XL 82
AT-MC14 82
AT-MCF2000 82
AT-MCF2000AC 82
AT-MCF2000M 82
AT-MCF2012LC 82
AT-MCF2012LC/1 82
Part Number Page
AT-MCR12 82
AT-PWR01-00 84
AT-PWR01-80 84
AT-PWR14 81
AT-PWR15 81
AT-PWR4 82
AT-PWR9 82
AT-SBx908 84
AT-SPBD10-13 81
AT-SPBD10-14 81
AT-SPFX/15 81
AT-SPFX/2 81
AT-SPLX10 81
AT-SPSX 81
AT-SPTX 81
AT-SPXBD-LC-13 81
AT-SPXBD-LC-15 81
AT-TN-NMS-5K-UK 85
AT-TN-NMS-DK 85
AT-TN-NMS-R9-D 85
AT-TN-NMS-R9-S 85
AT-TN-NMS-SK 85
AT-TN-NMS-UK 85
AT-TRAY1 82
AT-TRAY4 82
AT-x900-24XS 84
AT-x900-24XT 84
AT-x900-48FE 84
AT-x900-48FS 84
AT-XEM-12S 84
AT-XEM-12T 84
AT-XEM-1XP 84
AT-XEM-STK 84
AT-XPLR 81
AT-XPSR 81
AX100029 63
AX100041 64
AX100045 64
AX100047 64
AX100066 64
AX100066 64
AX100068 64
AX100077 64
AX100079 64
AX100084 64
AX100094 64
AX100115 64
AX100282 59
AX100452 59
AX100454 59
AX100491 59
AX100532 64
AX100645 67
AX100646 67
AX100647 67
AX100648 67
AX100649 67
Part Number Page
AX100650 67
AX100651 67
AX100652 67
AX100653 67
AX100654 67
AX100655 67
AX100680 57
AX100681 57
AX100683 57
AX100684 57
AX100685 57
AX100686 57
AX100749 67
AX100910 63
AX100919 63
AX100929 63
AX100947 63
AX100949 63
AX100951 63
AX101046 58
AX101047 58
AX101063 67
AX101064 67
AX101065 67
AX101066 67
AX101067 67
AX101068 67
AX101069 67
AX101070 67
AX101071 67
AX101072 67
AX101073 67
AX101075 63
AX101077 63
AX101090 65
AX101091 65
AX101100 64
AX101101 64
AX101114 65
AX101188 65
AX101189 65
AX101190 65
AX101342 57
AX101343 57
AX101345 57
AX101346 57
AX101347 57
AX101348 57
AX101407 64
AX101411 63
AX101412 63
AX101431 58
AX101432 58
AX101433 58
AX101434 58
AX101435 58
AX101436 58
116
Part Number Page
AX101437 58
AX101438 58
AX101447 55
AX101448 55
AX101456 59
AX101466 66
AX101467 66
AX101468 56
AX101469 56
AX101470 54
AX101471 54
AX101472 55
AX101478 56
AX101483 55
AX101486 55
AX101520 56
AX101521 56
AX101524 65
AX101525 65
AX101526 65
AX101529 65
AX101530 65
AX101531 65
AX101532 57
AX101533 57
AX101534 57
AX101535 57
AX101536 57
AX101537 57
AX101538 57
AX101539 57
AX101540 57
AX101541 57
AX101551 57
AX101554 57
AX101569 57
AX101611 58
AX101612 58
AX101613 58
AX101614 58
AX101626 57
AX101729 64
AX101731 64
AX101791 63
AX101792 63
AX101793 63
AX101794 63
AX101823 66
AX101824 66
AX101825 66
AX101826 66
AX101827 66
AX101828 66
AX101829 66
AX101830 66
AX101831 66
AX101832 66
Part Number Page
AX101833 66
AX101834 66
AX101835 66
AX101836 66
AX101837 66
AX101838 66
AX101839 66
AX101840 66
AX101841 66
AX101842 66
AX101852 67
AX101943 65
AX101945 59
AX101946 59
AX101947 59
AX101948 59
AX101949 59
AX101950 59
AX101951 59
AX101952 59
AX101953 59
AX101954 59
AX101955 59
AX101956 59
AX101957 59
AX101958 59
AX101959 59
AX101960 59
AX101961 59
AX101962 59
AX101963 59
AX101964 59
AX101965 59
AX101966 59
AX101967 59
AX101968 59
AX101969 59
AX101970 59
AX101971 59
AX101972 59
AX101973 59
AX101974 59
AX101975 59
AX101976 59
AX101977 59
AX101978 59
AX101979 59
AX101980 59
AX101981 63
AX101982 63
AX101983 63
AX101984 63
AX101985 54
AX101986 55
AX101988 66
AX102032 65
AX102061 63
Part Number Page
AX102062 63
AX102063 63
AX102146 56
AX102147 56
AX102148 56
AX102149 56
AX102150 56
AX102151 56
AX102152 56
AX102153 56
AX102154 56
AX102155 56
AX102156 56
AX102209 66
AX102210 66
AX102211 66
AX102213 66
AX102214 66
AX102215 66
AX102216 66
AX102271 57
AX102272 57
AX102274 57
AX102275 57
AX102276 57
AX102277 57
AX102293 58
AX102296 58
AX102307 65
AX102308 65
AX102309 65
AX102488 58
AX102582 58
AX102583 58
AX102585 58
AX102595 66
AX102596 66
AX102597 66
AX102598 66
AX102599 66
AX102601 66
AX102602 66
AX102603 66
AX102604 66
AX102605 66
AX102619 66
AX102624 66
AX102625 66
AX102626 66
AX102627 66
AX102628 66
AX102666 55
AX102667 55
AX102674 55
AX102675 55
AX102676 55
AX102677 55
Part Number Page
AX200056 65
AX200057 65
AX200058 65
AX200060 65
AX200082 65
AX200084 65
AX200090 65
AX200091 65
AX200092 65
AX200094 65
AX200095 65
AX200096 65
AX200097 65
AX200098 65
AX200192 65
AX200196 65
AX200280 65
AX200341 65
AX200413 65
AX200421 65
AX200458 65
AX200459 65
AX200507 65
AX200508 65
AX200509 65
AX200517 65
AX200518 65
AX200519 65
AX200527 65
AX200528 65
AX200529 65
AX200580 65
AX200581 65
AX200589 65
AX200603 65
AX200624 65
AX200653 65
AX200657 65
AX200658 65
AX200659 65
AX200660 65
AX200664 65
AX200665 65
AX200666 65
AX200667 65
AX200668 65
AX200695 65
AX200698 65
AX200699 65
AX200795 65
AX200799 65
AX200800 65
AX200809 65
AX200811 65
AX200900 65
AX250021 66
AX250060 66
117
Part Number Page
AX250061 66
AX250065 66
AX250066 66
AX250067 66
AX250071 66
AX250072 66
AX250073 66
AX250105 66
AX250106 66
AX250224 66
AX250345 66
AX250349 66
AX250376 66
AX250387 66
AX250412 66
AX250413 66
AX250457 66
AX250458 66
AX350001 60
AX350002 60
AX350003 60
AX350004 60
AX350005 60
AX350006 60
AX350007 60
AX350008 60
AX350009 60
AX350010 60
AX350011 60
AX350012 60
AX350013 60
AX350014 60
AX350015 60
AX350016 60
AX350017 60
AX350018 60
AX350019 60
AX350020 60
AX350021 60
AX350022 60
AX350023 60
AX350024 60
AX350025 60
AX350026 60
AX350027 60
AX350028 60
AX350029 60
AX350030 60
AX350031 60
AX350032 60
AX350033 60
AX350034 60
AX350035 60
AX350036 60
AX350037 60
AX350038 60
AX350039 60
Part Number Page
AX350040 60
AX350041 60
AX350042 60
AX350043 60
AX350044 60
AX350045 60
AX350046 60
AX350047 60
AX350048 60
AX350049 60
AX350050 60
AX350051 60
AX350052 60
AX350053 60
AX350054 60
AX350055 60
AX350056 60
AX350057 60
AX350058 60
AX350059 60
AX350060 60
AX350061 60
AX350062 60
AX350063 60
AX350064 60
AX350065 60
AX350066 60
AX350067 60
AX350068 60
AX350069 60
AX350070 60
AX350071 60
AX350072 60
AX350093 60
AX350149 60
AX350160 60
AX350161 60
AX350162 60
AX350163 60
AX360015 60
AX360016 60
AX360017 60
AX360018 60
AX360021 60
AX360022 60
AX360023 60
AX360024 60
AX360027 60
AX360028 60
AX360029 60
AX360030 60
AX360045 60
AX360046 60
AX360047 60
AX360048 60
AX360051 60
AX360052 60
Part Number Page
AX360053 60
AX360054 60
AX360057 60
AX360058 60
AX360059 60
AX360060 60
AX360265 60
AX360266 60
AX360267 60
AX360268 60
BPNL-19-01U 76
BPNL-19-02U 76
BPNL-19-03U 76
BPNL-19-04U 76
BPNL-19-05U 76
BPNL-19-06U 76
BPNL-19V-01U 76
BPNL-19V-02U 76
BPNL-19V-03U 76
BRKT-06 19
BRKT-12 19
C0054642 67
CC6QS 89
F30Z1.5 WH 7
F30Z1.5BK 7
F30Z1BK 7
F30Z1WH 7
F30Z2BK 7
F30Z2WH 7
FTP5EBL 5
FTP5EGY 5
FTR-HOR-343F 76
GDA 62
GDD 62
GDR 62
GDW 62
GEA 62
GED 62
GER 62
GEW 62
GIMT 62
GMMT 62
GOCB 62
GOFB 62
GOSA 62
GOSB 62
GOWB 62
GUCB 62
GUMT 62
GUSA 62
GUSB 62
GUXT 62
ISDN10 8
ITC10 8
ITC100 8
ITC12 8
ITC20 8
Part Number Page
ITC200 8
ITC4 8
ITC40 8
ITC50 8
ITC6 8
MT101-302 88
MT101-303 88
MT101304 88
MT101-306 88
MT101-308 88
MT101-309 88
MT101310 88
MT101-314 88
MT101-319 88
MT101-340 89
MT101-341 89
MT101-342 89
MT101-343 89
MT101-603 88
MT110100WBA 13
MT110100WBL 13
MT110192RM 13
MT110200RM 13
MT110288WBA 13
MT110288WBL 13
MT110300 14
MT110300CTD 14
MT110300CTS 14
MT110300WBA 13
MT110300WBL 13
MT110900 14
MT110900CTD 14
MT110900CTS 14
MT11096WBA 13
MT11096WBL 13
MT110C4 14
MT110C5 14
MT110C64 14
MT110JTA 13
MT110JTL 13
MT110PCC1 14
MT110PCC2 14
MT110PCC5-4 14
MT110PCC6-4 14
MT19021 78
MT19022 78
MT19023 78
MT19041 78
MT19042 78
MT19043 78
MT19061 78
MT19062 78
MT19063 78
MT190CB 76
MT190CN 76
MT192509 13
MT192515 13
118
Part Number Page
MT24000-010i 10
MT24000-010M 10
MT24000-020i 10
MT24000-030i 10
MT24000-050M 10
MT24000-100M 10
MT2401-5BK 6, 77
MT2401BK 6, 77
MT2401-CV 6, 77
MT24030-230 9
MT24030-350 9
MT24040 9
MT24041 9
MT24042 9
MT2405 6, 77
MT24050 9
MT24051 9
MT2405-CV 6, 77
MT2406 6, 77
MT24060 10
MT24061 10
MT2407 6, 77
MT2408 6, 77
MT24080 10
MT24081 10
MT24082 10
MT24083 10
MT2409 6
MT2409 77
MT2417 6, 77
MT2418 6, 77
MT24840 9
MT24841 9
MT24842 9
MT27000-020 11
MT27000-020E 11
MT27000-100 11
MT27000-100E 11
MT27000-250 11
MT27000-250E 11
MT27000-500 11
MT27000-500E 11
MT27002-02 13
MT27002-03 13
MT27002-06 13
MT27002-11 13
MT27002-27 13
MT27002-55 13
MT27060 13
MT27061 13
MT27101-110 12
MT27101-270 12
MT27702 12
MT27703 12
MT27704 12
MT27901-110 12
MT27901-270 12
Part Number Page
MT27990 11
MT27991 11
MT27992 11
MT27993 11
MT27995 11
MT28060 13
MT28101-110 12
MT28101-270 12
MT28901-110 12
MT28901-270 12
MT30045 19
MT30612DSC 20
MT30612SSC 20
MT30612ST 20
MT30648DSC 20
MT30648SSC 20
MT30648ST 20
MT30901DSC 20
MT30901GK16MM 20
MT30901GK20MM 20
MT30901SSC 20
MT30901ST 20
MT30902DSC 20
MT30902ST 20
MT30915 20
MT30916 20
MT30917 20
MT30924DSC 20
MT30924ST 20
MT370020i 12
MT370030i 12
MT370030M 11
MT370040i 12
MT370050M 11
MT4550 6
MT54501C 7, 89
MT54501CBK 7, 89
MT54501H 7, 89
MT54501HBK 7, 89
MT54524EM 6
MT5801UA-BK 7
MT5801UA-WH 7
MT64501C 7, 89
MT64501CBK 7, 89
MT64501H 7, 89
MT64501HBK 7, 89
MT64524E 6
MT64524M 6
MT6801UA-BK 7
MT6801UA-WH 7
MT6A801UA-BK 7
MT6A801UA-WH 7
MT6L45410.0XX* 7
MT6L45450.5XX* 7, 90
MT6L45451.0XX* 7, 90
MT6L45451.5XX* 7, 90
MT6L454510.0XX* 90
Part Number Page
MT6L45452.0XX* 7, 90
MT6L45453.0XX* 7, 90
MT6L45455.0XX* 7, 90
MT8100-200 6, 78
MT8100-300 6, 78
MT8201 7
MT8210 6
MT8300 95
MT8301BL 94, 95
MT8301RD 94, 95
MT8303 95
MT8304-AFC 98
MT8304-ALC 98
MT8304-ASC 98
MT8304-MTRJ 98
MT8304-MULC 98
MT8304-STSC 98
MT8305-003 94
MT8305-010 94
MT8305-030 94
MT8305-050 94
MT8305-150 94
MT8306 94
MT8306P 94
MT8307 94
MT8307C 94
MT8308 94
MT8309 94
MT8311 94
MT8311RC 94
MT8313 94
MT8314 94
MT8315 94
MT8316 99
MT8317 99
MT8318 99
MT8319 99
MT8320 99
MT8321 99
MT8322 99
MT8322.1 99
MT8322.2 99
MT8322.3 99
MT8323 98
MT8323.3 98
MT8324.1 98
MT8324.2 98
MT8325 98
MT8325.1 98
MT8326 94
MTADCBK 7
MTADCBL 7
MTADCRD 7
MTADCWH 7
MTADCYL 7
MTADHBK 7
MTADHBL 7
Part Number Page
MTADHRD 7
MTADHWH 7
MTADHYL 7
MTCAB27A600C 72
MTCAB27A600F 72
MTCAB27A800C 72
MTCAB27A800F 72
MTCAB27A900C 72
MTCAB27A900F 72
MTCAB40A600C 72
MTCAB40A600F 72
MTCAB40A800C 72
MTCAB40A800F 72
MTCAB40A900C 72
MTCAB40A900F 72
MTCAB45A1000F 72
MTCAB45A600C 72
MTCAB45A600F 72
MTCAB45A800C 72
MTCAB45A800F 72
MTCAB45A900C 72
MTCAB45A900F 72
MTCAB45B800C 73
MTCAB45B800F 73
MTCAB45B900C 73
MTCAB45B900F 73
MTCAB45C1000F 73
MTCAB45C41000C 73
MTCAB45C850C 73
MTCAB45C850F 73
MTCAB45C900C 73
MTCAB45C900F 73
MTCABAPRU 74
MTCABAPRV 74
MTCABCB600A 74
MTCABCB800A 74
MTCABCB900A 74
MTCABCKHD 74
MTCABCKS 74
MTCABCMV27 77
MTCABCMV40 77
MTCABCMV45 77
MTCABCT27102 77
MTCABCT27152 77
MTCABCT40102 77
MTCABCT40152 77
MTCABCT45102 77
MTCABCT45152 77
MTCABDA27A 74
MTCABDA40A 74
MTCABDA45A 74
MTCABDP27A 74
MTCABDP40A 74
MTCABDP45A 74
MTCABDP45B 74
MTCABDP45C 74
MTCABDS27A 74
119
Part Number Page
MTCABDS40A 74
MTCABDS45A 74
MTCABDS45B 74
MTCABDS45C 74
MTCABFAN2C 75
MTCABFAN4C 75
MTCABFANRKM4 75
MTCABFS1000 75
MTCABFS600 75
MTCABFS800 75
MTCABFS900 75
MTCABLK 74
MTCABLKPL 74
MTCABMW18500 77
MTCABMW18500S 77
MTCABPLA1000 74
MTCABPLA600 74
MTCABPLA800 74
MTCABPLA900 74
MTCABPLB800 74
MTCABPLB900 74
MTCABRMCD 74
MTCABVPR10 76
MTCABVPR20 76
MTCABWM12350 77
MTCABWM12350F 77
MTCABWM12350S 77
MTCABWM12500 77
MTCABWM12500F 77
MTCABWM12500S 77
MTCABWM18500F 77
MTCABWM6350 77
MTCABWM6350F 77
MTCABWM6350S 77
MTCABWM6500 77
MTCABWM6500F 77
MTCABWM6500S 77
MTDLCADTSCMM 18
MTDLCADTSCSM 18
MTDLCMM 18
MTDLCSM 18
MTDSCADTMM 18
MTDSCADTSM 18
MTDSCAPCADTSM 18
MTEL45450.5XX* 7, 90
MTEL45451.0XX* 7, 90
MTEL45451.5XX* 7, 90
MTEL454510.0XX* 7, 90
MTEL45452.0XX* 7, 90
MTEL45453.0XX* 7, 90
MTEL45455.0XX* 7, 90
MTFCADTSM 18
MTFCSM 18
MTHSFSPF45 19
MTHSFSPF60 19
MTMTRJ 18
MTPCDLCDLCMM** 21
Part Number Page
MTPCDLCDLCOM3** 21
MTPCDLCDLCSM** 21
MTPCDSCAPCSCAPC** 21
MTPCDSCDSCMM** 21
MTPCDSCDSCOM3** 21
MTPCDSCDSCSM** 21
MTPCDSTDSTMM** 21
MTPCMTRJMTRJMM** 21
MTPCMTRJMTRJOM3** 21
MTPCSLCSLCSM** 21
MTPCSSCSSCSM** 21
MTPTLCMM2.0 21
MTPTLCMM2.0-12PK 21
MTPTLCOM32.0 21
MTPTLCOM32.0-12PK 21
MTPTLCSM2.0 21
MTPTLCSM2.0-12PK 21
MTPTMTRJOM32.0 21
MTPTMTRJOM32.0-12PK 21
MTPTSCAPCSM2.0 21
MTPTSCAPCSM2.0-12PK 21
MTPTSCMM2.0 21
MTPTSCMM2.0-12PK 21
MTPTSCOM32.0 21
MTPTSCOM32.0-12PK 21
MTPTSCSM2.0 21
MTPTSCSM2.0-12PK 21
MTPTSTMM2.0 21
MTPTSTMM2.0-12PK 21
MTQLCADTMM 18
MTQLCADTSM 18
MTRJ11FSTR 7
MTRJ11RSOL 7
MTRJ11RSTR 7
MTRJ12FSTR 7
MTRJ12RSOL 7
MTRJ12RSTR 7
MTRJ456RSTR 7
MTRJ45FSOL 7
MTRJ45FSTR 7
MTRJ45RSOL 7
MTRJ45RSTR 7
MTRJ45RSTRSC 7
MTSCAPC 18
MTSCMM 18
MTSCSM 18
MTSLCADTMM 18
MTSLCADTSM 18
MTSLCMM 18
MTSLCSM 18
MTSSCADTMM 18
MTSSCADTSM 18
MTSSCAPCADTSM 18
MTSTADTMM 18
MTSTADTSM 18
MTSTMM 18
MTSTSCADTMM 18
Part Number Page
MTSTSCADTSM 18
MTSTSM 18
MTSWB14 88
MTSWB28 88
MTSWP 88
MTTUBE 12
NOT0580 63
OCAP1CAA0**OE 16
OCAP53AA001AQ 16
OCAP62AA0**OE 16
OCCP1CAA0**BK 16
OCCPP62AA0**BK 16
OCYP1CAA001YW 16
OCYP50AA001OE 16
OCYP62AA001GY 16
OEYP1CAA002YW 16
OEYP50AA002OE 16
OEYP53AA002AQ 16
OEYP62AA002GY 16
OK7U1CPA0**BK 17
OKDU1CPA0**BE 17
OKDU62PA0**BE 17
OKHU1CPA0**BK 17
OKHU62PA0**BK 17
OKPU1CPA0**BK 17
OKPU62PA0**BK 17
OKTU1CEA0**BK 17
OKTU62EA0**BK 17
OM7U1CPA0**BK 17
OMDU1CPA0**BE 17
OMHU1CPA0**BK 17
OQ7U1CEA0**BK 17
OQCU1CEA0** 16
OQCU53EA0** 16
OQCU62EA0** 16
OQDU1CEA0** 16
OQDU53EA0** 16
OQDU62EA0** 16
OQPU1CEA0**BK 17
OQPU53EA0**BK 17
OQPU62EA0**BK 17
OQTU1CEA0**BK 17
OQTU53EA0**BK 17
OQTU62EA0**BK 17
OWAP1CAA0** 16
OWAP53AA0** 16
OWAP62AA0** 16
OWBP1CAA0** 16
OWBP53AA0** 16
OWBP62AA0** 16
P0660798 55
PB-HOR12-10A 76
PB-HOR12-IEC 76
PB-HOR16-IEC 76
PB-HOR6-10A 76
PX101317 63
PX101318 63
Part Number Page
R100996 36
R25107 48
R25432 48
R25676 48
R25677 48
R30004-20 19
R30021 41
R30039-06 19, 41
R30042 19
R301462 45
R302003 40
R30203 41
R302149 36
R302151 47
R302152 29, 47
R302153 47
R302154 29, 47
R302155 29, 47
R302156 29, 47
R302157 29, 47
R302158 29, 47
R302309 43
R302310 43
R302312 43
R302313 43
R302314 43
R302316 43
R302331 43
R302332 43
R302334 43
R302335 43
R302336 43
R302338 43
R302342 47
R302343 47
R302344 47
R302345 47
R302347 47
R302348 47
R302349 47
R302362 35
R302363 35
R302420 47
R30315 40
R303343 45
R303344 45
R303346 45
R303901 37
R30393 19, 40
R30394 19, 40
R303985 45
R303986 45
R303987 45
R303989 45
R304275 36
R304325 28
R304326 28
120
Part Number Page
R304327 28
R304328 28
R304807 48
R304825 48
R304826 48
R304827 48
R304828 48
R305014 44
R305015 44
R305020 44
R305021 44
R305022 44
R305024 44
R305040 44
R305042 44
R305043 44
R305044 44
R305046 44
R305090 33
R305117 30
R305118 30
R305120 30
R305121 30
R305178 46
R305180 46
R305181 46
R305183 46
R305374 42
R305649 27
R305685 47
R305686 29, 47
R305687 47
R305688 29, 47
R305689 47
R305690 29, 47
R305691 29, 47
R305692 29, 47
R305693 47
R305758 42
R305766 33
R30581 45
R30582 45
R30583 45
R30585 45
R305885 31
R305886 31
R305887 31
R305888 31
R305889 32
R305890 32
R30602 45
R30603 45
R30605 45
R306057 39
R306058 39
R306060 39
R306061 39
Part Number Page
R306062 39
R306063 39
R306064 39
R306179 32
R306180 32
R306181 32
R306258 27
R30640 46
R30641 46
R30642 46
R30644 46
R30692-12 40
R307036 38
R307037 38
R307038 38
R307039 38
R307083 44
R307084 44
R307085 44
R307086 44
R307087 44
R307088 44
R307089 44
R307090 44
R307091 44
R307092 43
R307093 43
R307094 43
R307199 48
R307300 46
R307387 46
R307388 45
R307521 46
R307522 46
R307523 46
R307524 46
R307527 45
R307528 45
R307529 45
R307810 38
R307832 38
R307833 38
R308066 40
R308067 40
R308069 40
R30841 19
R30842 19
R30843 19
R308444 19, 41
R308445 19, 41
R308448 19, 41
R308456 41
R308459 28
R308461 28
R308484 40
R308489 40
R308493 40
Part Number Page
R308496 40
R308501 40
R308502 40
R308513 40
R308514 40
R308517 40
R308518 40
R30870 36
R30871 42
R30872 42
R30873 42
R308731 28
R308732 28
R308733 28
R308734 28
R308898 46
R308899 46
R308900 46
R308902 46
R308903 46
R308904 46
R308905 46
R308916 46
R308917 46
R308918 46
R308926 46
R308927 46
R308928 46
R308950 46
R308951 46
R308952 46
R308971 37
R309129 36
R309132 32
R309134 32
R309138 32
R309142 36
R309145 36
R309319 27
R309493 40
R309588 39
R309589 39
R309610 40
R309611 40
R309619 40
R309641 28
R31014 45
R310141 47
R310142 47
R310143 47
R310144 47
R310145 47
R310146 47
R310147 47
R310148 47
R31015 45
R310216 47
Part Number Page
R310218 48
R31026 45
R31027 45
R310288 46
R31029 45
R310296 46
R310400 36
R310401 36
R310560 46
R310561 46
R310722 39
R310726 39
R310727 39
R310761 40
R310765 32
R310774 32
R310819 45
R310820 45
R310821 45
R310822 45
R311496 28
R311571 29
R311575 29
R311577 29
R311579 29
R311580 29
R311624 39
R311625 39
R312231 29
R312695 28
R312775 28
R312808 27
R312877 45
R313083 28
R313086 31
R313087 30
R313089 35
R313092 28
R313152 46
R313330 38
R313333 38
R313636 44
R313637 44
R313638 44
R313639 44
R313640 44
R313641 44
R313642 44
R313643 44
R313683 27
R313814 49
R313815 49
R313816 48
R314000 38
R314387 47
R314388 47
R314447 46
121
Part Number Page
R314448 46
R314449 46
R317073 37
R317074 37
R317075 37
R317076 37
R317077 38
R317078 37
R317079 38
R317080 38
R317081 38
R317082 37
R317083 38
R317084 38
R317091 37
R318281 42
R318285 42
R318288 43
R318289 43
R318337 42
R318343 42
R318522 42
R318523 42
R318527 42
R318528 42
R318555 42
R318741 28
R318742 28
R318743 28
R318746 28
R318771 43
R318780 43
R318804 38
R318890 42
R318943 42
R318946 42
R318951 42
R318952 42
R318953 42
R318955 42
R318963 42
R318965 42
R318988 43
R318989 43
R318990 43
R318993 43
R318998 43
R318999 43
R319024 49
R319025 49
R319026 49
R319027 49
R319028 49
R319029 49
R319030 49
R319031 49
R319034 49
Part Number Page
R319035 49
R319036 49
R319041 49
R319042 49
R319043 49
R319044 49
R319101 42
R35048 27
R35049 27
R35056 27
R35057 27
R35115 34
R35116 34, 36
R35117 34
R35291 27
R35292 27
R35401 36
R35402 36
R35403 36
R35407 35
R35408 36
R35409 35, 36
R925602 29
R925719 37
R925728 37
R925782 36
R925822 37
R925824 37
RW410123 89
RW500214 90
RW500216 90
RW500218 90
RW510412/14 90
RW510414 90
RW520213 90
RW530214 90
RWCAHD15FBNCF0.2G 91
RWCAHD15FBNCF0.3G 91
RWCAHD15MBNCF0.3G 91
RWCAHD15MBNCF0.9G 91
RWCAHD15MBNCF1.5G 91
RWCAHD15MBNCF3.0G 91
RWCAHD15MBNCM0.3G 91
RWCAHD15MBNCM0.9G 91
RWCAHD15MBNCM1.8G 91
RWCAHD15MBNCM3.0G 91
RWCAHD15MBNCM5.0G 91
RWCAHD15MHD15F10.0G 91
RWCAHD15MHD15F15.0G 91
RWCAHD15MHD15F2.0G 91
RWCAHD15MHD15F20.0G 91
RWCAHD15MHD15F3.0G 91
RWCAHD15MHD15F5.0G 91
RWCAHD15MHD15M10.0G 91
RWCAHD15MHD15M15.0G 91
RWCAHD15MHD15M2.0G 91
RWCAHD15MHD15M20.0G 91
Part Number Page
RWCAHD15MHD15M3.0G 91
RWCAHD15MHD15M5.0G 91
RWCAHDI5MRCA35.0G 91
RWCAHDMIM1.5 91
RWCAHDMIM10.0 91
RWCAHDMIM3.0 91
RWCAHDMIM5.0 91
RWCARCA2RCA2**G 91
RWCARCA2RCA2**N 91
RWCARCA2TRS35**G 91
RWCARCA3RCA3**G 91
RWCARCA3RCA3**N 91
RWCARCARCA**N 91
RWCARCARCA2**N 91
RWCARCARCAF20.3N 91
RWCATRS35TRS35**N 91
RWCF59 89
RWCF6Q 89
SPKL-04 19
SPKL-06 19
SPKL-08 19
SPKL-12 19
SPKL-24 19
TAW163 90
TAW263 90
TCW128 90
TCW138 90
TCW1414 90
TCW14xx 90
TCW24xx 90
TCW350 90
TCW84 90
TSCW24 90
UPTL5EMPTBK 5
UPTL5EMTPBL 5
UPTL5EMTPGN 5
UTPL5E 89
UTPL5EBL 5
UTPL5EGN 5
UTPL5EGY 5
UTPL5EHF 5
UTPL5EJF 5
UTPL5EMTPRD 5
UTPL5EMTPVT 5
UTPL5EMTPYE 5
UTPL5EPP 5
UTPL5ERD 5
UTPL5EYE 5
UTPL6305RB 5, 89
122
NOTES
123
NOTES
124
NOTES
125
NOTES
126
NOTES
127
NOTES
128
NOTES
129
NOTES
130
NOTES
131
NATIONAL SALES ENQUIRIES
Ph: 1800 66 99 99
SYDNEY
149 Beaconsfield StSilverwater NSW 2128
Ph: 612 9748 1911 | Fax: 612 9737 9615
MELBOURNE
124 Weston StBrunswick East VIC 3056
Ph: 613 9387 1933 | Fax: 613 9387 4696
BRISBANE
75 Proprietary StTingalpa QLD 4173
Ph: 617 3890 1733 | Fax: 617 3890 1156
PERTH
56 Clavering RdBayswater WA 6053
Ph: 618 9262 8100 | Fax: 618 9262 8199
CANBERRA
Unit 2, 57 Tennant St Fyshwick ACT 2609
Ph: 612 6280 5056 | Fax: 612 6228 1070
DUBAI
P.O. Box 8735Dubai, United Arab Emirates
Ph: 971 50 457 2976 | Fax: 971 4 333 1480
WWW.MADISONTECH.COM