Post on 09-Sep-2018
ECSS-DOC-001/ES Issue 7.1 15 October 2014
ECSS ECSS Document Tree and Status (ST, HB, TM) - Overview
ECSS Secretariat ESA-ESTEC
Requirements & Standards Division Noordwijk, The Netherlands
ECSS-DOC-001/ES Issue 7.1 15 October 2014
Change log
ECSS-DOC-001/ES Issue 7
13 October 2014
Update to account for the new published ECSS documents:
- ECSS-Q-ST-20-07C
- ECSS-Q-ST-20-08C, and
- ECSS-E-AS-11C
ECSS-DOC-001/ES Issue 7.1
15 October 2014
Update to account for the new published ECSS documents:
- ECSS-Q-ST-70C Rev.1
- ECSS-Q-ST-70-71C, and
- ECSS-E-ST-32-08C Rev.1
Table of contents
Change log ................................................................................................................. 2
1 Introduction ........................................................................................................... 3
2 ECSS Disciplines ................................................................................................... 4
3 Standards ............................................................................................................... 5
3.1 Management branch: Standards ............................................................................... 5
3.2 Product assurance branch: Standards ...................................................................... 6
3.3 Engineering branch: Standards................................................................................. 8
3.4 Sustainability branch ............................................................................................... 10
4 Handbooks and Technical Memoranda ............................................................. 11
4.1 Product assurance branch: Handbooks and TMs ................................................... 11
4.2 Engineering branch: Handbooks and TMs .............................................................. 12
5 ECSS Policy and Configuration and information mangement documents .... 13
2
ECSS-DOC-001/ES Issue 7.1 15 October 2014
1 Introduction This document is targeting ECSS users and developers to be used as a dashboard to summarize the status of published documents, documents in the ongoing Work-plan (new and to be updated), and identifies potential documents to be updated (e.g. because CRs where provided and not yet closed).
The ECSS standards are organized in three branches: Management, Engineering and Product Assurance, and each branch is organized in disciplines (see section 2).
The identification of the different standards published, under production (i.e. to be updated or to be issued for the first time), or later to be modified is provided in section 3.1 for the Management standards, in section 3.2 for the Product Assurance standards, and in section 3.3 for the Engineering standards. On the figures the situation for each standard is identified as follows:
Standard published where no update is ongoing (valid issue of standard identified)
Published standard that will be modified due to near term
publication of other standard
Standard published where an update is ongoing (will be
republished as per Work-plan)
Note: Updates are done based on dispositioned document Change Requests
New standard under drafting (will be published as per Work-plan)
The identification of the different Handbook and TMs published or under production is provided in section 4.1 for the Product Assurance standards, and in section 4.2 for the Engineering standards.
Finally, section 5 lists the active version of the ECSS standards, section 3.2 lists the standards under update or drafting, and section 3.3 lists all previous version superseded.
LEGEND:
• ST – Standard
• AS – Adopted Standard
• HB – Handbook
• AH – Adopted Handbook
• TM – Technical Memorandum
3
ECSS-DOC-001/ES Issue 7.1 15 October 2014
2 ECSS Disciplines ECSS-S-ST-00C
System descriptionECSS-S-ST-00-01C
Glossary of terms
Space project management branch
Space product assurance branch
Space engineering branch
M-10 disciplineProject planning and implementation
M-40 disciplineConfiguration and information management
M-60 disciplineCost and schedule management
M-70 disciplineIntegrated logistic support
M-80 disciplineRisk management
Q-10 disciplineProduct assurance management
Q-20 disciplineQuality assurance
Q-30 disciplineDependability
Q-40 disciplineSafety
Q-60 disciplineEEE components
Q-70 disciplineMaterials, mechanical parts and processes
E-10 disciplineSystem engineering
E-20 disciplineElectrical and optical engineering
E-30 disciplineMechanical engineering
E-40 disciplineSoftware engineering
E-50 disciplineCommunications
E-60 disciplineControl engineering
E-70 disciplineGround systems and operations
Q-80 disciplineSoftware product assurance
LEGENDLEGEND
Ongoing update of an existing document
U
Space sustainability branch
U-10 disciplineSpace debris
U-20 disciplinePlanetary protection
(as of 6 May 2014)
U-30 disciplineSpace situation awareness
4
ECSS-DOC-001/ES Issue 7.1 15 October 2014
3 Standards 3.1 Management branch: Standards
M-10 disciplineProject planning and implementation
M-40 disciplineConfiguration and information management
M-60 disciplineCost and schedule management
M-70 disciplineIntegrated logistic support
M-80 disciplineRisk management
Space project management branch
ECSS-M-ST-10C Rev.1Project planning and implementation
ECSS-M-ST-40C Rev.1Configuration and information management
ECSS-M-ST-60CCost and schedule management
ECSS-M-70AIntegrated logistic support
ECSS-M-ST-80CRisk management
ECSS-M-ST-10-01COrganization and conduct of reviews
Published
LEGENDLEGEND
Ongoing update of an existing document
New document in production NU
(as of 25 March 2010)
Document affected by update of other doc.
M
5
ECSS-DOC-001/ES Issue 7.1 15 October 2014
3.2 Product assurance branch: Standards
Q-10 disciplineProduct assurance management
Q-20 disciplineQuality assurance
Q-30 disciplineDependability
Q-40 disciplineSafety
Q-60 disciplineEEE components
Q-70 disciplineMaterials, mechanical parts and processes
Q-80 disciplineSoftware product assurance
Space product assurance branch
ECSS-Q-ST-10C Product assurance management
ECSS-Q-ST-60-13CCommercial electrical, electronic and electromechanical (EEE) components
ECSS-Q-ST-10-04CCritial-item control
ECSS-Q-ST-30-09CAvailability analysis
ECSS-Q-ST-40-12CFault tree analysis - Adoption notice ECSS/IEC 61025
ECSS-Q-ST-60-02CASIC and FPGA development
ECSS-Q-ST-60-05C Rev.1Generic procurement requirements for hybrids
ECSS-Q-ST-60-12CDesign, selection, procurement and use of die form monolithic microwave integrated circuits
ECSS-Q-ST-60C Rev.2Electrical, electronic and electromechanical (EEE) components
ECSS-Q-ST-10-09CNonconformance control system
ECSS-Q-ST-20C Rev.1Quality assurance
ECSS-Q-ST-30-02CFailure modes, effects (and criticality) analysis
ECSS-Q-ST-30CDependability
ECSS-Q-ST-40-02CHazard analysis
ECSS-Q-ST-40CSafety
ECSS-Q-ST-80CSoftware product assurance
ECSS-Q-ST-60-14CRelifing procedure – EEE components
NOTE: Q-70 discipline is detailed in the next chart
NOTE: Q-70 discipline is detailed in the next chart
ECSS-Q-ST-20-10COff-the-shelf items utilization in space systems
ECSS-Q-ST-20-07CQuality and safety assurance for space test centres
ECSS-Q-ST-60-15CRadiation hardness assurance – EEE components
(as of 13 October 2014)
Published
LEGENDLEGEND
Ongoing update of an existing document
New document in production NU
Document affected by update of other doc.
M
ECSS-Q-ST-20-08CStorage, handling and transportation of spacecraft hardware
ECSS-Q-ST-30-11C Rev.1Derating - EEE components
ECSS-Q-ST-10C Rev.1 U
ECSS-Q-ST-20C Rev.2
ECSS-Q-ST-30C Rev.1
ECSS-Q-ST-40C Rev.1U U ECSS-Q-ST-80C
Rev.1U U
6
ECSS-DOC-001/ES Issue 7.1 15 October 2014
ECSS-Q-ST-70-03CBlack-anodizing of metals with inorganic dyes
ECSS-Q-ST-70-06CParticle and UV radiation testing for space materials
Q-70 disciplineMaterials, mechanical parts and processes
ECSS-Q-ST-70-09CMeasurements of thermo-optical properties of thermal control materials
ECSS-Q-ST-70-20CDetermination of the susceptibility of silver-plated copper wire and cable to "red-plague" corrosion
ECSS-Q-ST-70-22CControl of limited shelf-life materials
ECSS-Q-ST-70C Rev.1 Materials, mechanical parts and processes
ECSS-Q-ST-70-26CCrimping of high-reliability electrical connections
ECSS-Q-ST-70-28CRepair and modification of printed circuit board assemblies for space use
ECSS-Q-ST-70-30CWire wrapping of high-reliability electrical connections
ECSS-Q-ST-70-38CHigh-reliability soldering for surface-mount and mixed technology
ECSS-Q-ST-70-45CMechanical testing of metallic materials
ECSS-Q-ST-70-46C Rev.1Requirements for manufacturing and procurement of threaded fasteners
ECSS-Q-ST-70-01CCleanliness and contamination control
ECSS-Q-ST-70-02CThermal vacuum outgassing test for the screening of space materials
ECSS-Q-ST-70-04CThermal testing for the evaluation of space materials, processes, mechanical parts and assemblies
ECSS-Q-ST-70-05CDetection of organic contamination surfaces by IR spectroscopy
ECSS-Q-ST-70-08CManual soldering of high-reliability electrical connections
ECSS-Q-ST-70-10CQualification of printed circuit boards
ECSS-Q-ST-70-11CProcurement of printed circuit boards
ECSS-Q-ST-70-13C Rev.1Measurements of the peel and pull-off strength of coatings and finishes using pressure-sensitive tapes
ECSS-Q-ST-70-18CPreparation, assembly and mounting of RF coaxial cables
ECSS-Q-ST-70-21CFlammability testing for the screening of space materials
ECSS-Q-ST-70-29CDetermination of offgassing products from materials and assembled articles to be used in a manned space vehicle crew compartment
ECSS-Q-ST-70-31CApplication of paints and coatings on space hardware
ECSS-Q-ST-70-36CMaterial selection for controlling stress-corrosion cracking
ECSS-Q-ST-70-37CDetermination of the susceptibility of metals to stress-corrosion cracking
ECSS-Q-ST-70-07CVerification and approval of automatic machine wave soldering
ECSS-Q-ST-70-71CMaterials, processea and their data selection
ECSS-Q-ST-70-50CParticle contamination monitoring for spacecraft systems and cleanrooms
ECSS-Q-ST-70-12CDesign rules for printed circuit boards
Cleanliness Material testing Material processes Assembling processes Parts
(as of 15 October 2014)
Published
LEGENDLEGEND
Ongoing update of an existing document
New document in production NU
Document affected by update of other doc.
M
Planetary protection
ECSS-Q-ST-70-53CMaterials and hardware compatibility tests for sterilization processes
ECSS-Q-ST-70-55CMicrobiological examination of flight hardware and cleanrooms
ECSS-Q-ST-70-58CBioburden control in cleanrooms
ECSS-Q-ST-70-56CVapour phase bioburden reduction for flight hardware
ECSS-Q-ST-70-57CDry heat bioburden reduction for flight hardware
ECSS-Q-ST-70-54CUltra cleaning of flight hardware N
ECSS-Q-ST-70-38C Rev.1 UECSS-Q-ST-70-39CProcessing and quality assurance requirements for welding of metallic materials for flight hardware N
ECSS-Q-ST-70-10C Rev.1
ECSS-Q-ST-70-11C Rev.1
U
U
ECSS-Q-ST-70-26C Rev.1 U
ECSS-Q-ST-70-15CNon-destructive testing or non-destructive inspectionN
ECSS-Q-ST-70-14CCorrosion
N
7
ECSS-DOC-001/ES Issue 7.1 15 October 2014
3.3 Engineering branch: Standards Space engineering
branch
E-10 disciplineSystem engineering
E-20 disciplineElectrical and optical engineering
E-30 disciplineMechanical engineering
E-40 disciplineSoftware engineering
E-50 disciplineCommunications
E-60 disciplineControl engineering
E-70 disciplineGround systems and operations
ECSS-E-ST-10-09CReference coordinate system
ECSS-E-ST-10-11CHuman factors engineering
ECSS-E-ST-20-06CSpacecraft charging
ECSS-E-ST-20-07C Rev.1Electromagnetic compatibility
ECSS-E-ST-20-08C Rev.1Photovoltaic assemblies and components
ECSS-E-ST-20CElectrical and electronic
ECSS-E-ST-50-01CSpace data links - Telemetry synchronization and channel coding
ECSS-E-ST-50-02CRanging and Doppler tracking
ECSS-E-ST-50-03CSpace data links - Telemetry transfer frame protocol
ECSS-E-ST-50-04CSpace data links - Telecommand protocols, synchronization and channel coding
ECSS-E-ST-50-05C Rev.2Radio frequency and modulation
ECSS-E-ST-50-12C (see NOTE 1)SpaceWire - Links, nodes, routers and networks
ECSS-E-ST-50-14CSpacecraft discrete interfaces
ECSS-E-ST-50CCommunications
ECSS-E-ST-60-20C Rev.1Star sensor terminology and performance specification
ECSS-E-ST-70-11CSpace segment operability
ECSS-E-ST-70-31CGround systems and operations - Monitoring and control data definition
ECSS-E-ST-70-32CTest and operations procedure language
ECSS-E-ST-70CGround systems and operations
ECSS-E-ST-10-02CVerification
ECSS-E-ST-10-03CTesting
ECSS-E-ST-10-04CSpace environment
ECSS-E-ST-10-06CTechnical requirements specification
ECSS-E-ST-10-12CMethod for the calculation of radiation received and its effects, and a policy for design margins
ECSS-E-ST-10CSystem engineering general requirements
ECSS-E-ST-40CSoftware general requirements
ECSS-E-ST-50-13CInterface and communication protocol for Mil std 1553B
ECSS-E-ST-60-10CControl performances
ECSS-E-ST-10-24CInterface management
ECSS-E-ST-60-21CGyros terminology and performance
Note: E-30 discipline is detailed in the next chart
Note: E-30 discipline is detailed in the next chart
ECSS-E-ST-70-01COn-board control procedures
E-20-01A Rev.1Multipaction design and test
ECSS-E-ST-50-15CCAN bus extension protocol
N
N
ECSS-E-70-41ATelemetry and telecommand packet utilization
ECSS-E-ST-70-41C U
NOTE 1: At next issue, the document might be renumbered to: ECSS-ECSS-E-ST-50-50
ECSS-E-ST-50-52CSpaceWire - Remote memory access protocol
ECSS-E-ST-50-53CSpaceWire - CCSDS packet transfer protocol
N
ECSS-E-ST-50-51CSpaceWire protocol identification
(as of 13 October 2014)
Published
LEGENDLEGEND
Ongoing update of an existing document
New document in production NU
Document affected by update of other doc.
M
MECSS-E-ST-50-12C Rev.1 U
M
ECSS-E-ST-20-20CInterface requirements for electrical power N
ECSS-E-ST-60-30CAttitude and orbit control systems (AOCS) requirements
ECSS-E-ST-10C Rev.1
ECSS-E-ST-10-02C Rev.1
U
U
ECSS-E-ST-20C Rev.1 UECSS-E-AS-11CAdoption Notice of ISO 16290 – Definition of TRLs and their criteria of assessment
8
ECSS-DOC-001/ES Issue 7.1 15 October 2014
E-30 disciplineMechanical engineering
ECSS-E-ST-32-02C Rev.1Structural design and verification of pressurized hardware
ECSS-E-ST-32-03CStructural finite element models
ECSS-E-ST-32-08C Rev.1Materials
ECSS-E-ST-32-10C Rev.1Structural factors of safety for spaceflight hardware
ECSS-E-ST-32-11CModal survey assessment
ECSS-E-ST-32C Rev.1Structural general requirements
ECSS-E-ST-33-11CExplosive systems and devices
ECSS-E-ST-34CEnvironmental control and life support
ECSS-E-ST-35-06C Rev.1Cleanliness requirements for spacecraft propulsion hardware
ECSS-E-ST-31CThermal control general requirements
ECSS-E-ST-32-01C Rev.1Fracture control
ECSS-E-ST-33-01CMechanisms
ECSS-E-ST-35-01CLiquid and electric propulsion for spacecraft
ECSS-E-ST-35-10CCompatibility testing for liquid propulsion systems
ECSS-E-ST-35C Rev.1Propulsion general requirements
ECSS-E-ST-31-02CTwo-phase heat transport equipment
ECSS-E-ST-35-02CSolid propulsion for spacecraft and launchers
ECSS-E-ST-35-03CLiquid propulsion for launchers
(as of 15 October 2014)
Published
LEGENDLEGEND
Ongoing update of an existing document
New document in production NU
Document affected by update of other doc.
M
ECSS-E-ST-33-11C Rev.1
ECSS-E-ST-33-01C Rev.1
U
U
ECSS-E-ST-31-02C Rev.1U
ECSS-E-ST-31-04CExchange of thermal model data for space applications N
9
ECSS-DOC-001/ES Issue 7.1 15 October 2014
3.4 Sustainability branch
Space sustainability branch
U-10 disciplineSpace debris
Published Document affected by update of other doc.
M
Ongoing update of an existing document
UNew document in production N
ECSS-U-AS-10CAdoption Notice of ISO 24113: Space systems - Space debris mitigation requirements
(as of 13 October 2014)
U-20 disciplinePlanetary protection
ECSS-U-ST-20CPlanetary protection
N
U-30 disciplineSpace situation awareness
10
ECSS-DOC-001/ES Issue 7.1 15 October 2014
4 Handbooks and Technical Memoranda 4.1 Product assurance branch: Handbooks and TMs
Q-10 disciplineProduct assurance management
Q-20 disciplineQuality assurance
Q-30 disciplineDependability
Q-40 disciplineSafety
Q-60 disciplineEEE components
Q-70 disciplineMaterials, mechanical parts and processes
Q-80 disciplineSoftware product assurance
Space product assurance branch
LEGENDLEGEND
ECSS-Q-HB-80-01AReuse of existing software
ECSS-Q-HB-80-02 Part 1ASoftware process assessment and improvement – Part 1: Framework
ECSS-Q-HB-80-03AMethods and techniques to support the assessment of software dependability and safety
ECSS-Q-HB-80-04ASoftware metrication programme definition and implementation
ECSS-Q-TM-30-12AEnd-of-life parameters drifts – EEE components
ECSS-Q-TM-70-52AKinetic outgassing of materials for space
TM made availableHB Published(as of 4 February 2014)
ECSS-Q-TM-70-51ATermination of optical fibres
ECSS-Q-TM-40-04 Part 1ASneak analysis – Part 1: Principles and requirements
ECSS-Q-TM-40-04 Part 2ASneak analysis – Part 2: Clue list ECSS-Q-HB-80-02 Part 2A
Software process assessment and improvement – Part 2: Assessor instrument
ECSS-Q-HB-30-01AWorst case analysis
ECSS-Q-HB-30-08AComponent reliability data sources and their use
ECSS-Q-HB-30-03AHuman error analysis handbook
ECSS-Q-HB-60-02ATechnique for radiation effects mitigation in ASICs and FPGAs handbook
Ongoing update of an existing document
New document in production NU
NN
11
ECSS-DOC-001/ES Issue 7.1 15 October 2014
4.2 Engineering branch: Handbooks and TMs Space engineering
branch
E-10 disciplineSystem engineering
E-20 disciplineElectrical and optical engineering
E-30 disciplineMechanical engineering
E-40 disciplineSoftware engineering
E-50 disciplineCommunications
E-60 disciplineControl engineering
E-70 disciplineGround systems and operations
ECSS-E-TM-10-21ASystem modelling and simulation
ECSS-E-HB-50ACommunications guidelines
ECSS-E-HB-10-02AVerification guidelines
ECSS-E-HB-40ASoftware engineering handbook
ECSS-E-HB-20-07ASpacecraft electromagnetic compatibility handbook
ECSS-E-TM-10-20AProduct data exchange
ECSS-E-TM-10-23ASpace system data repository
ECSS-E-HB-10-12ACalculation of radiation and its effects, and margin policy handbook
ECSS-E-HB-20-05AHigh voltage engineering and design handbook
ECSS-E-HB-32-20AStructural design data handbook (8 parts)
ECSS-E-HB-31-01AThermal design data handbook (16 parts)
ECSS-E-HB-32-24ABuckling handbook
ECSS-E-HB-32-21AAdhesive bonding handbook
ECSS-E-HB-32-22AInsert design handbook
ECSS-E-HB-32-23AThreaded fasteners handbook
ECSS-E-HB-60AControl engineering handbook
ECSS-E-HB-60-10AControl performance guidelines
ECSS-E-TM-40-07ASimulation modelling platform (5 volumes)
ECSS-E-HB-32-26ASpacecraft mechanical loads analyses handbook
(as of 4 February 2014)
ECSS-E-TM-10-10ALogistics engineering
ECSS-E-TM-10-25AEngineering design model data exchange
ECSS-E-HB-32-25AShock analysis and testing handbook
ECSS-E-HB-20-02A Li-ion battery handbook
ECSS-E-HB-20-03A Magnetic cleanliness handbook
ECSS-E-HB-10-03A Testing handbook
ECSS-E-HB-31-03A Thermal analysis handbook
LEGENDLEGEND
Ongoing update of an existing document
New document in production NU
HB Published TM made available
N N
N N
N
12
ECSS-DOC-001/ES Issue 7.1 15 October 2014
5 ECSS Policy and Configuration and information mangement documents
P-00 disciplineECSS Policy
D-00 disciplineConfiguration and information
management
ECSS Documentation
ECSS-P-00CStandardization objectives, policies and organization
ECSS-D-00AECSS processes
Published
LEGENDLEGEND
Ongoing update of an existing document
New document in production NU
(as of 20 May 2014)
Document affected by update of other doc.
M
ECSS-D-00C UECSS-D-00-01CDrafting rules and template for ECSS Standards
ECSS-D-00-02ADrafting rules and template for ECSS Handbooks
ECSS-D-00-11ACriteria for acceptance for Public Review and Criteria for Handbook relase for publication
13