Post on 09-Mar-2021
DX340LCAEngine Power : SAE J1349, net 185kW(247HP)@1,800rpm
Operational Weight : 34,400kg(75,839 lb) - STD.
Bucket capacity(SAE) : 1.25 ~ 2.35m3
The new DX340LCA hydraulic excavator has all the advantages of the previous model, and now offers additional added value to the operator. The new DX340LCA was developed with the concept of “providing optimum value to the end user.” In concrete terms, this translates into : Improved ergonomics, increases comfort and excellent all round visibility ensuring a safe and pleasant working environment. Improved reliability is achieved through the use of high performance materials combined with new methods of structural stress analysis, and leads to increased component life expectancy, thus reducing running costs. Reduced maintenance increases the availability and reduces operating costs of the excavator.
Hydraulic Excavator DX340LCA
A New Model Doosan DX340 LCA Hydraulic Excavator :
Performance
Swing Drive
Shocks during rotation are
minimized, while increased
torque is available to
ensure rapid cycles.
Hydraulic Pump
The Main pump has a capacity of
2x247 /min reducing cycle time
while a high capacity gear pump
improves pilot line efficiency.
DX340LCA is designed for tough and heavy work
environments where need massive force.
The performance of the DX340LCA has a direct
effect on its productivity.
Advanced hydraulic circuit seperates the oil flow for travel
and boom function to allow precise and safe operation
when handling loads during travel.
The circuits for the boom, arm, and bucket have been
improved to assure smooth and confident control during
combination.
New technologically advanced control valve and joystick
valves have been installed to allow speedy, smooth and
responsive control.
DOOSAN DX340LCA ENGINE
Maker & Model
Performance Standard
Power (Max , Rated)
Max. Torque
Fuel Consumption (Max , Rated)
DOOSAN DE12TIS
DIN 6271, SAE J1349
195 kW (265 PS) @ 1800 rpm (DIN 6271)
185 kW (247 HP) @ 1800 rpm (SAE J1349)
114 kg.m/ 1400 rpm
155 g/ps.h @ RATED SPEED (TIER-II)
The brains of the hydraulic excavator, the e-EPOS, have been
improved, through a CAN(Controller Area Network)
communication link, enabling a continuous exchange of
information between the engine and the hydraulic system.
These units are now perfectly synchronised.
The advantages of the new e-EPOS impacts at several levels,
Ease of operation and user-friendliness:
· The availability of a power mode and standard mode
guarantee maximum efficiency under all conditions.
· The automatic deceleration mode enables fuel saving.
· Regulation and precise control of the flow rate required
by the equipment are available as standard.
· A self-diagnosis function enables technical problems to
be resolved quickly and efficiently.
· An operational memory provides a graphic display of
the status of the machine.
· Maintenance and oil change intervals can be displayed.
T
im
c
in
T
T
E
·
·
·
·
·
·
Excavator controlNew e-EPOS system (Electronic Power Optimizing System)
Comfort
Control lever
Very precise control of the equipment increases versatility, safety
and facilitates tricky operations requiring great precision.
Leveling operations and particularly the movement of suspended
loads are made easier and safer. The control levers have additional
electrical buttons for controlling other additional equipment
(for example, grabs, crushers, grippers, etc.)
The work rate of the hydraulic excavator is directly linked to
the performace of its operator. DOOSAN designed the DX 340
LCA by putting the operator at the center of the development
goals. The result is significant ergonomic value that improves
the efficiency and safety of the operator.
Air suspension seat (Opt.)
Equipped with various functions of
adjustment forth and back and, and
lumbar support, it reduces the vibration
of equipment transmitted during work
in an effective way.
Also for considering winter
working environment,
Seat warmer functions
equipped.
Control stand (Telescopic Function)Comfortable 2-stage sliding seat
1. Warning lights
2. Control panel
3. Operation modes
1
2
3
Control panelWith color LCD display
Standard screen Theft prevention
function
Filter/oil information Operation history Flow rate control Contrast control
More space, better
visibility, air conditioning,
a very comfortable seat.
These are all elements
that ensure the operator
can work for hours and
hours in excellent
conditions.
1. Cellular phone box2. 12V Power socket3. Cigarette lighter4. Glass antenna
1. 2.
3. 4.
The high performance air conditioning provides
an air flow which is adjusted and electronically
controlled for the conditions. Five operating
modes enable even the most demanding
operator to be satisfied.
Rear Camera (Opt.)
Power mode - Standard : uses 88% engine power for all work
- Power : uses 100% engine power for heavy work
- Economy : 76% engine power
Choice of operating modes
Reliability & Maintenance
Strengthened Boom
The shape of the boom has been optimized by finite
elements design, allowing uniform load distribution
throughout the structure. This combined with
increased material thickness means improved
durability and reliability by limiting element fatigue.
Strengthened Arm
In the arm assembly greater strength has been gained
by using cast elements and reinforcement around the
bosses to give it an increased lifetime.
Bushing
A highly lubricated metal is used for the boom
pivot in order to increase the lifetime and
extend the greasing intervals to 250 hours.
Ultra-hard wear-resistant disc
New have been used in order to increase the wear
resistance and to increase the service intervals.
Bucket Highly wear-resistant materials are used for the most
susceptible elements such as the blades, teeth, rear and lateral
reinforcement plates and corners of the bucket.
Doosan uses computer- assisted design techniques,
highly durable materials and a quality engineered
structure. Our research and development engineers test
all product under the most extreme conditions.
Durability,reliability and product longevity are Doosan's
top priorities.
The reliability of a product contributes to its
overall lifetime operating costs.
The X-chassis frame section has been
designed using finite element and 3-dimensional
computer simulation
Designed using advanced technology 3D
CAD and FEM analysis.
Integrated Track Spring and Idler
The track spring and the idler have been joined directly
to achieve high durability and improved maintenance
convenience.
Tracks
The chain is composed of self-lubricating
sealed links isolated from all external
contamination. The tracks are locked by
mechanically bolted pins.
Improve the pilot hose material
· Resins Rubber
· Decrease curve angle of hose
Apply CORG type · Captive O-Ring Groove
· Narrow groove hold O-ring in more effective way.
· This will prevent leaking by O-Ring damage.
Convenient Fuse Box
The fuse box is conveniently located in a
section of the storage compartment behind
the operator's seat providing a clean
environment and easy access.
PC Monitoring (DMS)
A PC monitoring function enables
connection to the e-EPOS system, allowing
various parameters to be checked during
maintenance.
· Change Tooth design
· Increase Thickness
of Tooth
Prevent Popping
Increase more Thickness
and Durability of Tooth
Track Link
Reinforce thickness on Stressed region.
S340LC DX340LCA
Strengthened Boom
Strengthened Arm
Advanced Track Frame Advanced Main Frame
Centralized grease inlets for easy maintenance
The arm grease inlets are grouped
for easy access.
Technical Specification
Weight
(STD)600G mm
(OPT)700G mm
(OPT)800G mm
(OPT)850G mm
(OPT)900G mm
(OPT)600DG mm
Shoe width
0.66 kgf/cm2
0.56 kgf/cm2
0.50 kgf/cm2
0.47 kgf/cm2
0.45 kgf/cm2
0.67 kgf/cm2
Ground pressure
TRIPLE GROUSER
Engine
MODELDoosan DE12TIS
TYPE4-Cycle ATA Intercooler in-Line
NUMBER OF CYLINDERS6
RATED HORSE POWER195 kW (265 PS) @ 1,800 rpm (DIN 6271)
185 kW (247 HP) @ 1,800 rpm (SAE J1349)
MAX TORQUE114 kgf.m @ 1,400 rpm
PISTON DISPLACEMENT11,051cc
BORE & STROKE123mm x 155 mm
STARTING MOTOR24 V x 6.0 kW
BATTERIES12 V x 2/150 AH
AIR CLEANERDouble element
Hydraulic System
The heart of the system is the e-EPOS (Electronic Power Optimizing
System). It allows the efficiency of the system to be optimized for all
working conditions and minimizes fuel consumption. The new e-EPOS
is connected to the engine electronic control via a data transfer link to
harmonize the operation of the engine and hydraulics.
The hydraulic system enables independent or
combined operations.
Two travel speeds offer either increased torque or
high speed tracking.
Cross-sensing pump system for fuel savings.
Auto deceleration system.
Two operating modes, two power modes.
Button control of flow in auxiliary equipment circuits.
Computer-aided pump power control.
MAIN PUMPSParallel, Bentaxis, Piston
max flow : 2x274 /min
Displacement : 157 cc/rev
weight : 180kg
PILOT PUMPGear pump - max flow : 22.5 /min
Pilot pump : 11.86 cc/rev
Relief valve pressure : 40 kgf/cm2
MAIN RELIEF PRESSUREBoom/Arm/Bucket
Working, Travel - 330 [+10~0] kg/cm2
Pressure up - 350 [+10~0] kg/cm2
Hydraulic Cylinders
The piston rods and cylinder bodies are made of high-strength
steel. A shock absorbing mechanism is fitted in all cylinders to
ensure shock-free operation and extend piston life.
Swing Mechanism
High-torque, axial piston motor with planetary reduction gear
bathed in oil. Swing circle is singlerow, shear type ball bearing
with induction-hardened internal gear. Internal gear and pinion
gear immersed in lubricant.
SWING SPEED - 0 to 8.9 rpm
MAX. SWING TORQUE - 11660 kgf.m (EFF.=0.863)
Bore x Rod diameter x stroke150 X 100 X 1,430mm
170 X 120 X 1,805mm
150 X 100 X 1,300mm
Quantity2
1
1
CylindersBoom
Arm
Bucket
34.4 ton
34.5 ton
34.8 ton
35.0 ton
35.2 ton
34.9 ton
Machine Weight
Hydraulic oil return filter
The protection of the hydraulic system
is more effective,using glass fiber filter
technology in the main oil return filter.
Air cleaner
The large capacity forced air cleaner
removes over 99% of airborne particles,
reducing the risk of engine contamination
and making the cleaning and cartridge
change intervals greater.
Easy maintenance
Access to the various radiators and coolers
is very easy, making cleaning easier. Access
to the various parts of the engine is from
the top and via side panels.
DOOSAN has developed the DX 340 LCA profitability with end-user
in mind. Easy maintenance operations at long intervals increase the
availability of the equipment on site.
Fuel pre-filter
High efficiency fuel filtration is attained
by the use of multiple filters, including
a fuel pre-filter fitted with a water
separator that removes most moisture
from the fuel.
Undercarriage
Chassis are of very robust construction, all welded structures
are designed to limit stresses.High-quality material used for
durability.Lateral chassis welded and rigidly attached to the
undercarriage. Track rollers lubricated for life, idlers and
sprockets fitted with floating seals.Tracks shoes made of
induction-hardened alloy with triple grousers.Heat-treated
connecting pins.Hydraulic track adjuster with shock-absorbing
tension mechanism.
Upper rollers(Standard shoe) - 2Lower rollers - 9Track shoes - 48
Overall track length - 4,940mm
Drive
Each track is driven by an independent, high-torque, axial piston
motor through planetary reduction gear. Two levers or foot pedal
control provide smooth travel or counter-rotation upon demand.
TRAVEL SPEED (HIGH/LOW) - 3.1/4.7 km/h (EFF.=99.0/95.2%)
MAXIMUM TRACTION FORCE - 27.0 / 15.1 ton (EFF.=75.7/68.8%)
GRADEABILITY - 70%
Refill Capacities
FUEL TANK - 550
COOLING SYSTEM (RADIATOR CAPACITY) - 34
ENGINE OIL - 28
SWING DRIVE (=SWING DEVICE = SWING MOTOR + SWING REDUCTION GEAR) - 6
FINAL DRIVE (=TRAVEL DEVICE = TRAVEL MOTOR + TRAVEL REDUCTION GEAR) - 2x5.5
HYDRAULIC TANK (FULL) - 380
Bucket
SAEheaped
Capacity
Bucket
G.P
H.D
Boom
(6,500mm)
Boom
(6,200mm)Width
CECEheaped W/Cutter W/O Cutter
WeightArm
(2,600mm)Arm
(3,200mm)Arm
(2,600mm)
1.10m3
1.30m3
1.41m3
1.60m3
1.09m3
1.29m3
1.48m3
1.60m3
1.80m3
2.35m3
1.25m3
1.49m3
1.61m3
1.83m3
1.20m3
1.42m3
1.65m3
1.79m3
2.01m3
2.35m3
1228mm
1410mm
1500mm
1668mm
1068mm
1220mm
1372mm
1460mm
1610mm
1800mm
1278mm
1460mm
1550mm
1718mm
1134mm
1286mm
1438mm
1526mm
1676mm
1760mm
A
A
A
A
A
A
A
A
B
D
A
A
A
B
A
A
B
B
C
D
A
A
A
A
A
A
A
A
B
C
1,249kg
1,344kg
1,392kg
1,522kg
1,290kg
1,414kg
1,512kg
1,596kg
1,692kg
1,870kg
Based on ISO 10567 and SAE J296, arm length without quick change clamp
A. Suitable for materials with density of 2,100 kg m
3 (3,500 lb/yd
3) or less
B. Suitable for materials with density of 1,800 kg m
3 (3,000 lb/yd
3) or less
C. Suitable for materials with density of 1,500 kg m
3 (2,500 lb/yd
3) or less
D. Suitable for materials with density of 1,200 kg m
3 (2,000 lb/yd
3) or less
Digging forces (ISO)
STD. Arm
Short Arm
G.P
H.D
3200mm
2600mm
[SAE] 16.3 / 17.3 , [ISO] 16.9 / 17.9
[SAE] 20.0 / 21.2 , [ISO] 20.7 / 22.0
[SAE] 20.4 / 21.7 , [ISO] 23.1 / 24.5
[SAE] 21.5 / 22.8 , [ISO] 23.4 / 24.8
Arm Bucket
Diggingforce
(Nom./Press.up, ton)
Diggingforce
(Nom./Press.up, ton)Length
Dimensions Working Range
Boom Type (One Piece)
Arm Type
Bucket Type (pcsa)
MAX. digging reach
Max. digging reach ( ground )
MAX. digging depth
Max. loading height
Min. loading height
Max. digging height
Max. bucket pin height
Max.vertical wall depth
Max. radius vertical
Max. digging depth 8'line
Min. radius 8'line
Min. digging reach
Min.swing radius
Bucket angle
(mm)
(mm)
(m3)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(deg)
A
B
C
D
E
F
G
H
I
J
K
L
M
d
6,200
2,600
2.01
10,200
9,990
6,635
6,695
3,245
9,510
8,315
2,185
9,265
6,400
3,085
1,950
4,275
178
3,200
1.49
11,168
10,975
7,533
7,196
2,704
10,345
8,898
5,916
7,713
7,361
3,393
723
4,413
178
6,500
2,600
1.83
10,586
10,382
6,931
6,882
3,355
9,994
8,584
5,121
7,711
6,719
3,345
2,180
4,438
178
Boom Type (One Piece)
Arm Type
Bucket Type (pcsa)
Tail Swing Radius
Shipping Height (Boom)
Shipping Height (Hose)
Shipping Lengh
Shipping Width (Std.)
Shipping Width (Narrow)
C/Weight Clearance
Height Over Cab.
House Width
Cab. Height Above House
Cab. Width
Tumbler Distance
Track Length
Undercarriage Width (Std.)
Shoe Width
Track Height
Car Body Clearance
(mm)
(mm)
(m3)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
(mm)
A
B
C
D
E
E*
F
G
H
I
J
K
L
M
N
O
P
3,200
1.49
3,500
3,220
3,360
11,280
3,280
3,000
1,195
3,125
2,990
845
1,010
4,040
4,940
3,280
600
1,048
510
6,500
2,600
1.83
3,475
3,592
11,380
6,200
2,600
2.01
3,620
3,720
11,080
Standard
Dimensions (6,500mm(21'4")Boom, 3,200mm(10'6")Arm, 600mm(24")shoe)
Lifting Capacity
Standard
1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm.
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities.
5. The Least Stable Position is Over the Side.
: Rating Over Front
: Rating Over Side or 360 Degree
Metric
Boom : 6,500mm(21'4") Arm : 3,200mm(10'6") Bucket : Without Bucket Shoe : 600mm(24")Standard Track : 3,280mm(10'9")
A(m)
B(m)
Max. Reach
A(m)
* 7.71
* 7.62
7.58
7.10
6.95
7.11
7.64
* 8.45
* 8.35
6.97
5.73
5.06
4.70
4.57
4.65
4.98
5.72
7.36
7.71
8.59
9.14
9.42
9.45
9.23
8.76
7.97
6.76
Unit : 1,000kg
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
6.0 7.5 9.01.5
* 16.70 * 16.79
* 14.10
* 21.31
* 17.23
* 14.10
* 21.31
* 17.23
* 11.99
* 15.08
* 17.22
* 17.80
* 17.27
* 15.81
* 13.14
* 11.99
* 14.22
* 13.24
* 12.83
* 12.76
* 12.90
* 13.10
* 9.58
* 11.03
* 12.28
* 12.95
* 12.91
* 12.07
* 9.96
* 9.58
* 9.33
* 8.81
* 8.48
* 8.35
* 8.39
* 8.63
* 7.68
* 7.78
* 8.33
* 9.07
* 9.76
9.62
9.52
* 9.30
7.33
7.26
7.02
6.71
6.43
6.22
6.13
6.18
* 7.68
7.64
7.49
7.38
5.20
5.07
4.92
4.82
3.0 4.5
Feet
A(ft)
B(ft)
Max. Reach
A(ft)
* 17.04
* 16.81
16.79
15.69
15.33
15.68
16.88
* 18.63
* 18.36
15.67
12.76
11.21
10.39
10.08
10.26
11.01
12.69
16.51
25.01
28.04
29.92
30.88
31.00
30.30
28.69
26.03
21.92
Unit : 1,000ld
25
20
15
10
5
0
-5
-10
-15
5 10 15 20 25 30
* 37.58 * 37.58
* 31.86
* 46.30
* 37.09
* 31.86
* 46.30
* 37.09
* 25.78
* 32.42
* 37.17
* 38.57
* 37.46
* 34.25
* 28.22
* 25.78
30.70
28.55
27.63
27.46
27.75
* 28.22
* 20.75
* 23.86
* 26.57
* 28.05
* 27.98
* 26.07
* 21.20
16.44
16.12
15.90
10.90
10.60
10.40
* 20.75
20.14
19.01
18.29
17.99
18.09
18.64
* 17.04
* 17.03
* 18.15
* 19.71
* 21.17
20.72
20.51
19.94
15.68
15.60
15.11
14.47
13.86
13.42
13.22
13.35
1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm.
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities.
5. The Least Stable Position is Over the Side.
Option 1
Boom : 6,500mm(21'4") Arm : 3,200mm(10'6") Bucket : Without Bucket Shoe : 700mm(28")Standard Track : 3,200mm(10'6")
Unit : 1,000kgMetric
A(m)
B(m)
Max. Reach
A(m)
* 7.71
* 7.62
7.64
7.16
7.01
7.17
7.71
* 8.45
* 8.35
7.01
5.77
5.10
4.74
4.61
4.69
5.02
5.77
7.42
7.71
8.59
9.14
9.42
9.45
9.23
8.76
7.97
6.76
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
6.0 7.5 9.01.5
16.79 16.79
14.10
21.31
17.23
14.10
21.31
17.23
11.99
15.08
17.22
17.80
17.27
15.81
13.14
11.99
14.32
13.34
12.93
12.86
13.00
13.14
* 9.58
11.03
12.28
12.95
12.91
12.07
* 9.96
* 9.58
9.40
8.88
8.55
8.41
8.45
8.69
* 7.68
* 7.78
* 8.33
* 9.07
* 9.76
9.70
9.60
* 9.30
7.38
7.31
7.07
6.76
6.48
6.27
6.18
6.23
* 7.68
7.70
7.55
7.44
5.24
5.11
4.96
4.86
3.0 4.5
Unit : 1,000ldFeet
A(ft)
B(ft)
Max. Reach
A(ft)
* 17.04
* 16.81
* 16.87
15.82
15.46
15.81
17.03
* 18.63
* 18.36
15.78
12.85
11.29
10.47
10.17
10.34
11.10
12.79
16.64
25.01
28.04
29.92
30.88
31.00
30.30
28.69
26.03
21.92
25
20
15
10
5
0
-5
-10
-15
5 10 15 20 25 30
* 37.58 * 37.58
* 31.86
* 46.30
* 37.09
* 31.86
* 46.30
* 37.09
* 25.78
* 32.42
* 37.17
* 38.57
* 37.46
* 34.25
* 28.22
* 25.78
30.70
28.55
27.63
27.46
27.75
* 28.22
* 20.75
* 23.86
* 26.57
* 28.05
* 27.98
* 26.07
* 21.20
16.57
16.25
16.03
10.98
10.69
10.49
* 20.75
20.14
19.01
18.29
17.99
18.09
18.64
* 17.04
* 17.03
* 18.15
* 19.71
* 21.17
20.90
20.68
* 19.94
15.79
15.71
15.22
14.58
13.97
13.52
13.33
13.46
: Rating Over Front
: Rating Over Side or 360 Degree
Feet Unit : 1,000ld
A(ft)
B(ft)
Max. Reach
A(ft)
* 18.93
* 18.48
* 18.46
17.34
16.94
17.41
19.02
* 19.94
* 18.93
18.37
14.45
12.49
11.51
11.17
11.42
12.42
14.72
* 18.93
22.58
25.90
27.93
28.96
29.09
28.34
26.62
23.72
19.10
25
20
15
10
5
0
-5
-10
-15
10 15 20 25
* 32.52
* 40.99
* 30.87
* 32.52
* 40.99
* 30.87
* 28.69
* 38.48
* 36.37
* 32.24
* 24.70
* 28.69
27.73
27.80
28.26
* 24.70
* 20.01
* 22.42
* 25.31
* 27.59
* 28.48
* 27.72
* 24.89
* 18.56
* 19.39
* 20.73
21.20
20.82
20.74
15.36
14.97
14.40
13.87
13.53
13.45
* 20.01
21.08
19.88
18.90
18.34
18.21
18.46
Metric
Boom : 6,500mm(21'4") Arm : 2,600mm(8'6") Bucket : Without Bucket Shoe : 600mm(24")Standard Track : 3,200mm(10'6")
Option 3
A(m)
B(m)
Max. Reach
A(m)
* 8.56
* 8.38
* 8.38
7.85
7.68
7.90
8.61
* 9.05
* 8.64
8.13
6.47
5.64
5.21
5.07
5.18
5.62
6.63
* 8.64
6.98
7.95
8.53
8.83
8.87
8.64
8.12
7.26
5.91
Unit : 1,000kg
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
7.53.0
18.82
14.37
18.82
14.37
13.37
17.72
16.74
14.88
11.56
13.37
12.89
12.93
13.14
11.56
* 9.20
10.36
11.71
12.75
13.14
12.79
11.54
* 9.20
9.77
9.21
8.76
8.51
8.44
8.56
*8.46
* 8.90
* 9.55
9.84
9.67
9.62
7.15
6.95
6.68
6.43
6.27
6.23
4.5 6.0A(m)
B(m)
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
Lifting Capacity
1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm.
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities.
5. The Least Stable Position is Over the Side.
: Rating Over Front
: Rating Over Side or 360 Degree
Metric
Boom : 6,500mm(21'4") Arm : 3,200mm(10'6") Bucket : Without Bucket Shoe : 600mm(24")Narrow Track : 3,000mm(9'8")
Unit : 1,000kg
Feet Unit : 1,000ld
Option 2
1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm.
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities.
5. The Least Stable Position is Over the Side.
: Rating Over Front
: Rating Over Side or 360 Degree
A(m)
B(m)
Max. Reach
A(m)
* 7.71
* 7.62
7.55
7.08
6.93
7.08
7.61
* 8.45
* 8.35
6.25
5.12
4.51
4.18
4.05
4.11
4.40
5.06
6.51
7.71
8.59
9.14
9.42
9.45
9.23
8.76
7.97
6.76
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
6.0 7.5 9.01.5
16.79 16.79
14.10
21.31
17.23
14.10
21.31
17.23
11.99
15.08
17.22
17.80
17.27
15.81
13.14
11.99
12.46
11.53
11.14
11.07
11.20
11.52
* 9.58
11.03
12.28
12.95
12.91
12.07
* 9.96
8.87
8.28
7.78
7.46
7.33
7.37
7.60
* 7.68
* 7.78
* 8.33
* 9.07
* 9.76
9.59
9.48
* 9.30
6.58
6.51
6.27
5.98
5.70
5.50
5.40
5.45
* 7.68
7.61
7.46
7.35
4.63
4.50
4.36
4.26
3.0 4.5
Feet
A(ft)
B(ft)
Max. Reach
A(ft)
* 17.04
* 16.81
16.73
15.62
15.27
15.61
16.82
* 18.63
* 18.36
14.06
11.41
9.98
9.22
8.93
9.07
9.73
11.22
14.59
25.01
28.04
29.92
30.88
31.00
30.30
28.69
26.03
21.92
25
20
15
10
5
0
-5
-10
-15
5 10 15 20 25 30
* 37.58 * 37.58
* 31.86
* 46.30
* 37.09
* 31.86
* 46.30
* 37.09
* 25.78
* 32.42
* 37.17
* 38.57
* 37.46
* 34.25
* 28.22
* 25.78
26.95
24.89
24.00
23.84
24.12
24.84
* 20.75
* 23.86
* 26.57
* 28.05
* 27.98
* 26.07
* 21.20
16.37
16.05
15.83
9.68
9.39
9.19
19.13
17.89
16.79
16.09
15.80
15.89
16.43
* 17.04
* 17.03
* 18.15
* 19.71
21.13
20.64
20.43
* 19.94
14.06
13.99
13.51
12.89
12.29
11.85
11.66
11.79
Feet Unit : 1,000ld
A(ft)
B(ft)
Max. Reach
A(ft)
* 18.93
* 18.48
* 18.46
17.28
16.87
17.35
18.94
* 19.94
* 18.93
16.48
12.93
11.15
10.24
9.91
10.12
10.99
13.03
18.18
22.58
25.90
27.93
28.96
29.09
28.34
26.62
23.72
19.10
25
20
15
10
5
0
-5
-10
-15
10 15 20 25
* 32.52
* 40.99
* 30.87
* 32.52
* 40.99
* 30.87
* 28.69
* 38.48
* 36.37
* 32.24
* 24.70
* 28.69
24.10
24.18
24.62
* 24.70
* 20.01
* 22.42
* 25.31
* 27.59
28.48
* 27.72
* 24.89
* 18.56
* 19.39
* 20.73
21.12
20.74
20.66
13.76
13.37
12.82
12.30
11.97
11.90
19.81
18.81
17.64
16.68
16.15
16.02
16.26
Metric
Boom : 6,500mm(21'4") Arm : 2,600mm(8'6") Bucket : Without Bucket Shoe : 600mm(24")Narrow Track : 3,000mm(9'8")
Option 5
A(m)
B(m)
Max. Reach
A(m)
* 8.56
* 8.38
* 8.38
7.82
7.65
7.87
8.58
* 9.05
* 8.64
7.29
5.79
5.03
4.64
4.50
4.59
4.98
5.87
* 8.06
6.98
7.95
8.53
8.83
8.87
8.64
8.12
7.26
5.91
Unit : 1,000kg
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
7.53.0
18.82
14.37
18.82
14.37
13.37
17.72
16.74
14.88
11.56
13.34
11.19
11.23
11.43
11.56
* 9.20
10.36
11.71
12.75
13.14
12.79
11.54
9.19
8.71
8.16
7.73
7.48
7.42
7.53
* 8.46
* 8.90
* 9.55
9.81
9.63
9.59
6.41
6.21
5.94
5.70
5.54
5.51
4.5 6.0A(m)
B(m)
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
Lifting Capacity
1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm.
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities.
5. The Least Stable Position is Over the Side.
: Rating Over Front
: Rating Over Side or 360 Degree
Boom : 6,500mm(21'4") Arm : 2,600mm(8'6") Bucket : Without Bucket Shoe : 700mm(28")Standard Track : 3,200mm(10'6")
Option 4
1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm.
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities.
5. The Least Stable Position is Over the Side.
: Rating Over Front
: Rating Over Side or 360 Degree
Feet Unit : 1,000ld
A(ft)
B(ft)
Max. Reach
A(ft)
* 18.93
* 18.48
* 18.46
17.48
17.08
17.56
19.18
* 19.94
* 18.93
18.49
14.55
12.59
11.60
11.26
11.52
12.52
14.84
* 18.93
22.58
25.90
27.93
28.96
29.09
28.34
26.62
23.72
19.10
25
20
15
10
5
0
-5
-10
-15
10 15 20 25
* 32.52
* 40.99
* 30.87
* 32.52
* 40.99
* 30.87
* 28.69
* 38.48
* 36.37
* 32.24
* 24.70
* 28.69
27.94
28.02
28.47
* 24.70
* 20.01
* 22.42
* 25.31
* 27.59
* 28.48
* 27.72
* 24.89
* 18.56
* 19.39
* 20.73
21.37
21.0
20.92
15.47
15.07
14.50
13.98
13.63
13.56
* 20.01
21.23
20.02
19.04
18.49
18.35
18.61
Metric
A(m)
B(m)
Max. Reach
A(m)
* 8.56
* 8.38
* 8.38
7.92
7.75
7.96
8.68
* 9.05
* 8.64
8.19
6.52
5.68
5.25
5.11
5.22
5.67
6.69
* 8.64
6.98
7.95
8.53
8.83
8.87
8.64
8.12
7.26
5.91
Unit : 1,000kg
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
7.53.0
18.82
14.37
18.82
14.37
13.37
17.72
16.74
14.88
11.56
13.37
12.98
13.03
13.23
11.56
* 9.20
10.36
11.71
12.75
13.14
12.79
11.54
* 9.20
9.84
9.27
8.82
8.57
8.51
8.62
*8.46
* 8.90
* 9.55
9.92
9.75
9.70
7.2
7.0
6.73
6.48
6.32
6.28
4.5 6.0A(m)
B(m)
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
Feet Unit : 1,000ld
A(ft)
B(ft)
Max. Reach
A(ft)
* 19.88
* 19.36
* 19.35
18.61
18.18
18.74
20.62
* 21.11
* 19.85
* 19.88
15.74
13.51
12.40
12.03
12.34
13.50
16.26
* 19.85
21.27
24.78
26.89
27.96
28.10
27.31
25.53
22.49
17.53
25
20
15
10
5
0
-5
-10
-15
10 15 20 25
* 40.41
* 42.73
* 30.82
* 40.41
* 42.73
* 30.82
* 28.61
* 34.59
* 38.66
* 39.18
* 37.19
* 32.74
* 23.94
* 28.61
30.92
29.13
28.49
28.49
28.93
* 23.94
* 19.80
* 20.34
* 22.57
* 25.44
* 27.82
* 28.84
* 28.08
* 24.84
* 19.88
* 21.12
21.63
21.27
21.23
15.22
14.72
14.22
13.90
13.86
* 19.80
* 20.34
21.52
20.40
19.44
18.86
18.71
18.98
Metric
Boom : 6,200mm(20'4") Arm : 2,600mm(8'6") Bucket : Without Bucket Shoe : 700mm(28")Standard Track : 3,200mm(10'6")
Option 7
A(m)
B(m)
Max. Reach
A(m)
* 8.98
* 8.78
* 8.78
8.43
8.24
8.50
9.33
* 9.58
* 9.07
* 8.98
7.05
6.09
5.61
5.46
5.60
6.11
7.31
* 9.07
6.58
7.61
8.22
8.53
8.56
8.32
7.79
6.89
5.44
Unit : 1,000kg
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
7.53.0
17.81
19.66
14.42
17.81
19.66
14.42
13.09
16.08
17.89
18.06
17.13
15.13
11.28
13.09
14.32
13.51
13.24
13.24
13.44
11.28
* 8.96
* 9.33
10.41
11.75
12.85
13.31
12.96
11.54
* 8.96
* 9.33
9.98
9.45
9.01
8.75
8.68
8.79
* 8.78
* 9.11
* 9.71
10.04
9.87
9.84
7.22
7.07
6.83
6.60
6.44
6.41
4.5 6.0A(m)
B(m)
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
Lifting Capacity
Boom : 6,200mm(20'4") Arm : 2,600mm(8'6") Bucket : Without Bucket Shoe : 600mm(24")Standard Track : 3,200mm(10'6")
Option 6
Feet Unit : 1,000ld
A(ft)
B(ft)
Max. Reach
A(ft)
* 19.88
* 19.36
* 19.35
18.46
18.03
18.59
20.46
* 21.11
* 19.85
* 19.88
15.63
13.41
12.30
11.94
12.24
13.39
16.14
* 19.85
21.27
24.78
26.89
27.96
28.10
27.31
25.53
22.49
17.53
25
20
15
10
5
0
-5
-10
-15
10 15 20 25
* 40.41
* 42.73
*30.82
* 40.41
* 42.73
* 30.82
* 28.16
* 34.59
* 38.66
* 39.18
* 37.19
* 32.74
* 23.94
* 28.16
30.71
28.91
28.27
28.27
28.72
* 23.94
* 19.80
* 20.34
* 22.57
* 25.44
* 27.82
* 28.84
* 28.08
* 24.84
*19.88
* 21.12
21.46
21.10
21.05
15.12
14.61
14.12
13.79
13.75
* 19.80
* 20.34
21.38
20.26
19.29
18.72
18.57
18.84
Metric
A(m)
B(m)
Max. Reach
A(m)
* 8.98
* 8.78
* 8.78
8.36
8.18
8.43
9.26
* 9.58
* 9.07
8.98
7.0
6.05
5.57
5.42
5.55
6.06
7.26
* 9.07
6.58
7.61
8.22
8.53
8.56
8.32
7.79
6.89
5.44
Unit : 1,000kg
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
7.53.0
17.81
19.66
14.42
17.81
19.66
14.42
13.09
16.08
17.89
18.06
17.13
15.13
11.28
13.09
14.22
13.41
13.14
13.14
13.34
11.28
* 8.96
* 9.33
10.41
11.75
12.85
13.31
12.96
11.54
* 8.96
* 9.33
9.91
9.39
8.94
8.68
8.61
8.73
*8.78
* 9.11
* 9.71
9.96
9.79
9.76
7.17
7.02
6.78
6.55
6.39
6.36
4.5 6.0A(m)
B(m)
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm.
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities.
5. The Least Stable Position is Over the Side.
: Rating Over Front
: Rating Over Side or 360 Degree
1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm.
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities.
5. The Least Stable Position is Over the Side.
: Rating Over Front
: Rating Over Side or 360 Degree
Lifting Capacity
1. Lifting Capacities are in Compliance with ISO 10567
2. Loading Point is The End of The Arm.
3. Capacities Marked with an Asterisk (*) are Limited by Hydraulic Capacities.
4. Lifting Capacities Shown Do Not Exceed 75% of Minimum Tipping Loads or 87% of Hydraulic Capacities.
5. The Least Stable Position is Over the Side.
: Rating Over Front
: Rating Over Side or 360 Degree
Boom : 6,200mm(20'4") Arm : 2,600mm(8'6") Bucket : Without Bucket Shoe : 600mm(24")Narrow Track : 3,000mm(9'8")
Option 8
Feet Unit : 1,000ld
A(ft)
B(ft)
Max. Reach
A(ft)
* 19.88
* 19.36
* 19.35
18.39
17.96
18.52
20.38
* 21.11
* 19.85
18.24
14.01
11.98
10.96
10.61
10.86
11.88
14.30
* 19.85
21.27
24.78
26.89
27.96
28.10
27.31
25.53
22.49
17.53
25
20
15
10
5
0
-5
-10
-15
10 15 20 25
* 40.41
* 42.73
* 30.82
* 40.41
* 42.73
* 30.82
* 28.16
* 34.59
* 38.66
* 39.18
* 37.19
* 32.74
* 23.94
* 28.16
26.96
25.25
24.64
24.63
25.06
* 23.94
* 19.80
* 20.34
* 22.57
* 25.44
* 27.82
* 28.84
* 28.08
* 24.84
*19.88
* 21.12
21.38
21.02
20.97
13.52
13.03
12.55
12.23
12.19
* 19.80
19.98
19.10
18.01
17.07
16.52
16.37
16.63
Metric
A(m)
B(m)
Max. Reach
A(m)
* 8.98
* 8.78
* 8.78
8.33
8.15
8.40
9.22
* 9.58
* 9.07
8.06
6.27
5.40
4.96
4.81
4.93
5.38
6.43
* 9.07
* 6.58
* 7.61
* 8.22
* 8.53
* 8.56
* 8.32
* 7.79
* 6.89
* 5.44
Unit : 1,000kg
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
7.53.0
17.81
19.66
14.42
17.81
19.66
14.42
13.09
16.08
17.89
18.06
17.13
15.13
11.28
13.09
12.47
11.70
11.44
11.44
11.63
11.28
* 8.96
* 9.33
10.41
11.75
12.85
13.31
12.96
11.54
* 8.96
9.27
8.85
8.34
7.91
7.66
7.59
7.70
*8.78
* 9.11
* 9.71
9.93
9.76
9.73
6.43
6.28
6.04
5.82
5.67
5.64
4.5 6.0A(m)
B(m)
7.5
6.0
4.5
3.0
1.5
0
-1.5
-3.0
-4.5
DX340LCAHydraulic Excavator
Doosan Infracore Korea Office 27/F, Doosan Tower 18-12, Euljiro-6Ga, Jung-Gu
Seoul 100-730 Korea
Tel : 82 2 3398 8114
Doosan Infracore Europe S.A. Add 1A, Rue Achille Degrace Frameries B7080 Belgium
Tel : 32 478295266
Doosan Infracore U.K. Unit 6.3- Nantgarw Park Treforest Ind. Estate Cardiff
CF157QU U.K .
Tel : 44 1443 845650
Doosan Infracore Europe S.A. Germany Heinrich von stephan Strasse 2 Langenfeld-Fuhrkamp
DE-40764 Germany
Tel : 49 2173 2035218
Doosan Infracore France ZAC de la Clef Saint Pierre - Buroplus 2 1a,
avenue Jean d’ Alembert Elancourt F78990 France
Tel : 33 1 3016 2151
Doosan Infracore America Corporation2905 Shawnee Industrial Way, Suwanee, Georgia 30024, U. S. A
Tel : 770 831 2236
Doosan Infracore China Co., Ltd.No.28 Wuzhishan Road, Eco&Tech. Development Area,
Yantai Shandong 264006 China
Tel : 135 0535 2797
Doosan Infracore Russia123610, MOSCOW / Russia Fed., Kransnopresnenskaya quay 12,
Office No. 1503
Tel: 7 495 258 1837
Doosan Infracore Middle East Center (Dubai)P.O. Box 262688, Jebel Ali, Dubai - UAE
Tel : 971 4 8864660, 8855828
Doosan Infracore do Brasil ServiÇos de Suporte Comercial Ltda.Alameda Santos 2222 CJ52, 5a andar, Cerqueria Cesar
CEP 01418.200 Sao Paulo Brazil
Tel : 55 11 3061 3227
Doosan Infracore India Pvt.Ltd3rd Floor, TNPL Building No.67, Mount Road,
Guindy Chennai 600032 India
Tel : 91 99 4064 8687
Doosan Infracore Europe S.A. Doosan
Infracore France Doosan Infracore America Corporation
Doosan Infracore do Brasil ServiÇos de Suporte Comercial Ltda.
Doosan Infracore Europe S.A. Germany
Doosan Infracore Middle East Center (Dubai)
Doosan Infracore India Pvt.Ltd
Doosan Infracore Russia
Doosan Infracore China Co., Ltd.
Doosan Infracore Korea Office
Doosan Infracore U.K.
www.doosaninfracore.com/ce/ae/en