Post on 07-Jul-2018
> DUAL PUMP SUBMERSIBLE CONTROLLER
For more information give us a call on +613 9525 3844 for all your expert needs
Easy to install, Dual sump pump protection
The Auto Alternating Dual Submersible Pump Controller is specifically designed for use in sewerage, waste and storm water pumping stations.
Designed to be added to larger domestic, commercial and industrial dual pump pits. The system monitors the level of your pit by auto alternating (swapping) the pumps to get a regular run in low flow, and operating both pumps at times of high flow.
PumpmatiX’s Dual Submersible Pump Control Panel is engineered to ensure the state-of-the-art technology is extremelyreliable, coming with numerous pump protection and alarm features.
Note: Control panel recommended to be installed by a licensed electrician
Dual PumpOperation
In Peak Demands
Made to Australian Standards for Plumbing
and Electrical
Pump OverloadProtection
Auto/Off/ManualPump Selection
High & Low LevelAlarm
LED FunctionIndicators
Single PumpAlternatingOperation
7 Day Anti-SeizeProtection
The Pumpmatix Dual Pump Controller is a simplified system that requires minimum connections to ensure easy use.
LOW LEVEL ALARM
SINGLE PUMP AUTO ALTERNATING
BOTH PUMPS
HIGH LEVEL ALARM
Float Voltage (Low): 5V DC Internally Supplied
Voltage Free Contacts: (BMS)NO/C Rated 240V Max 10amps
Power SupplyVoltage Op ons: 240V/415V/480V - 50Hz
Visual DisplayLED: Power On, High or Low Level AlarmPump 1 & 2 Run, Auto/Off/ManualSingle Pump Alterna ng Opera ngDual Pumps Opera ng Flashing Strobe on all faults
Audible Alarm FeaturesScreamer: 95dB on all faultsManual mute bu onAutoma cally mutes in five minutesChirps every one hour
Technical Data
Op onal ExtrasHydrosta c Level Control, So Starters
EnclosureType:Material:Dimensions:
Supplied in a IP55 enclosureABS Plas c (Indoor use only)
290 x 290 x 180mmMaterial:Dimensions:
Metal Enclosure400 x 500 x 250mm
Overload Protec on: Electronic or Themal Overloads
> HYDROSTATIC LEVEL PROBES
DTB’s submersible hydrostatic level probes are engineered to ensure the state-of-the art technology is extremely reliable, coming with numerous pump protection and alarm features.
PROGRAMMABLELEVEL SETTINGS
WORKINGLEVEL DISPAY
RE - TRANSMIT4 to 20ma
(BMS)
RELIABLE INCOMMERCIAL
INSTALLATIONS
CAN BE USED IN :GREASY + HIGH TEMP
INSTALLATIONS
CAN BE USED IN :CONCENTRATED SEWERAGE
SOLIDS INSTALLATIONS
CAN BEINTEGRATED IN TO
SUBMERSIBLE SEWERAGECONTROLLERS
VERY ACCURATE LEVEL READING
DTB INTERNATIONAL PUMPING PTY. LTD.
DTB International Pumping manufactures award winning pump systems and engineering products to meet yourspecialised needs. With years of experience DTB prides itself on high quality reliable products that you can trust. To prve our commitment to our customers we provide 24 hour on site service and support for the life of the system.
For more information get in touch with us at www.dtbpumps.com.auor give us a call on +613 9525 3844 for all your expert needs
Hydrostatic Probe :
The pressure transmitter of the probe converts the level proportional hydrostatic pressure to a standard 4 to 20mA signal.
Standard Features :
> Accuracy 0.3%> Long-term stability 0.2% / 12 months> Corrosion - resistant materials> Stainless steel housing> PE / FEP halogen free sheath cabling> Measuring range from 2 to 20m
<<
HYDROSTATIC LEVEL PROBES FEATURES
> SINGLE SUBMERSIBLE PUMP CONTROLLER
Easy to install, single sump pump protection
The Single Submersible Pump Controller is specifically designed for use in sewerage, waste and stormwater pumping stations.
Designed to run commercial or industrial single pump pits. Operating your pump and monitoring the pump pit for a high level of liquid and for pump faults to ensure damage is prevented.
It combines automatic level control, level indication, pump protection and level alarms with a simple operator interface.
PumpmatiX’s submersible pump control panels are engineered to ensure the state-of-the-art technology is extremelyreliable, coming with numerous pump protection and alarm features.
ABS /Metal Enclosure
OptionalSoft Starter
Pump Overload Protection
Auto/Off/Manual Pump Selection
High Level Alarm
LED FunctionIndicators
Optional Hydrostatic Probe
7 Day Anti-Seize Protection
The Pumpmatix Single Pump Controller is a simplified system that requires minimum connections to ensure easy use.
HIGH LEVEL ALARM
SINGLE PUMP OPERATION
Note: Control panel recommended to be installed by a licensed electrician
Float Voltage (Low): 5V DC Internally Supplied
Voltage Free Contacts: (BMS)NO/C Rated 240V Max 10amps
Power SupplyVoltage Op ons: 240V/415V/480V - 50Hz
Visual DisplayLED: Power On, High Level AlarmPump Run, Auto/Off/ManualFlashing Strobe on all faults
Audible Alarm FeaturesScreamer: 95dB on all faultsManual mute bu onAutoma cally mutes in five minutesChirps every one hour
Technical Data
Op onal ExtrasHydrosta c Level Control, So Starters
EnclosureType:Material:Dimensions:
Supplied in a IP55 enclosureABS Plas c (Indoor use only)
240 x 190 x 140mmMaterial:Dimensions:
Metal Enclosure300 x 400 x 250mm
Overload Protec on: Electronic or Themal Overloads
For more information get in touch with us at www.dtbpumps.com.au or give us a call on +613 9525 3844 for all your expert needs
> HIGH LEVEL ALARM
For more information give us a call on +613 9580 3449 for all your expert needs
Easy to install, indoor or outdoor high level alarm
The pump pit high level alarm monitors water levels in pump pits, storm water drains, tanks, pump chambers, sewerage and other types of water pump systems.
Designed to be added to simple pump pits with a small automatic pump to detect a high level of liquid in your pit. It will automatically alert you of problems with the system through an audio-visual alarm.
It combines automatic level control, level indication and level alarms with a simple operator interface.
Power Supply
Display
Enclosure
Voltage Range
Current:
LED Power On:Flashing LED
Type:Material:Dimensions:
: 240V/50Hz(double insulated)
300mA
Indica on: High Level
Supplied in a IP55 enclosureABS
140 x 150 x 75mm
Technical Data
The PumpmatiX high level alarmis a simple and easy to install
system with a plug in and play controller.
Typical High LevelFloat Switch
Water Level
Wall MountedHigh Level AlarmPanel
PumpmatiX’s submersible pump control panels are engineered to ensure the state-of-the-art technology is extremelyreliable, coming with numerous pump protection and alarm features.
Note: Control panel recommended to be installed by a licensed electrician
Plug In an Play
Automatic Alarm Mute
Hourly Alarm Chirp240V Power Supply
High Level Alarm
ABS Enlosure
Function Indicators (LED)Flashing Strobe (LED)
Float Voltage (Low): 5V DC Internally Supplied
Voltage Free Contacts: (BMS)NO/C Rated 240V Max 10amps
Audible Alarm FeaturesScreamer: 95dBManual mute bu onAutoma cally mutes in five minutesChirps every one hour