Post on 25-Jul-2016
description
Light Boxby
Wave Riders
1.5 ¥51.5 1.5
Basel1.5
35.5Top zo Back
1.5
1.5 6 1.5 1.5 6 1.5
:o Side
33
Front1.5
1.5 6 1.5
37.59
Items to prepare1
. 1.5cm xl . 5cm Wood Rod X 6 pcs .
2 . White Hard - Plastic Board × Ipc .
3.
Clear Plastic Board
4. FoggyPlastic Sheet × Zpcs
5 . white Color Spay
6.
Glue,
staples7 . Hammer & nails
8.
2- sides Adhesive tqpl9
.
Hand Saw.
lo.
Cutter& Scissors
step to do .
1. Cut White Plastic Board
to be Base of box.
2. cut wood Rods
49 cm× I
46 cm x 3
37 cm X 2
35.5 cm x z
30 cm × 4
Any size x 1
3 . spray white color oh Wood Rods
4 .46 cm x I
,355cm ×2
wood Rods and White Plastic Board.
t Assembly with glue , stapleand nails
1.5 ¥5
35.5 Base
1.5 61 . 5
5. Assembly All Wood Rods together
1.5 if30 Back
1. :5 6 1.5
:oSid5 6 1.5
6. Cut foggy Plastic Sheets For sidebox
..
cut the corner edgeto fit with the box
.
1
7 .Attached Plastic Sheets withadhesive tape
8. Assembly the hanging bar on the back side
Hanging Bar
^
9. staple wood Rod and Clear White Plastic Board
to be hang in d background.
we can attach any pictureto be background
10 . Use adhesive tape attached the foggyPlastic sheet on the top ofboxtop
10 . cut the plain white Paper and insert
the paper into the gap between hanging bar.
:
Finish ! DIY Lisht Box