Post on 16-Aug-2015
TELEHANDLERS
INDUSTRIAL COMPLETE PRODUCT LINE
1
PARTS AVAILABILITYParts for Dieci products are availablefrom strategic distribution centerslocated in both Canada and the UnitedStates. From original parts such asjoysticks and cab windows to commonparts such as oil filters and belts.You can get what you need quicklyand easily. When equipmentgoes down, getting partsand service is critical. Ourparts distributioncenters arelocated sothat accessto all majortrade routes,highways,and interstatesare possible.In addition, major couriercompanies have scheduled dailypick-up and deliveries to and from thedistribution centers. Each distributioncenter being located near airports alsoprovides for rush air freight shipmentsfor both outgoing and incomingimportant items.
EASY ACCESSExperienced heavy equipment ownersunderstand the importance of regularpreventative maintenance. Imaginea piece of equipment whereyou can get at all of themaintenance and mechanicalpoints as easy as openingthe hood of your truck. DieciTelehandlers are designedfor quick access: simplyunlatching or unbolting apanel provides access toall major maintenanceor mechanical points.Dieciservicepoints,including the combinedhydrostatic transmission/hydraulic oil filter arereadily accessible andmajor components areeasy to reach from groundlevel due to the overall machine design.The engine hood swings wide openfor access to oil filters, oil fill, drain,radiator fluids and belts. Overriding thetwo gas struts on the head permits a90 opening, allowing unencumbered
engine access.Hydraulic control blocks,valves, cable trays and electricalsystems are easy to access for inspectionand maintenance. Dieci telehandlers aredesigned to reduce time and costs byusing only the very best components andproviding easy access to most servicepoints from ground level. Hydraulicdiagnostic ports are standard on pumps,motors and major hydraulic blocks.SERVICEThe Dieci Service Teams have manycombined years of mechanical, electrical,hydraulic and engine experience. Peoplelocated in both Canada and the UnitedStates work closely with the Dieci FactoryEngineers to solve issues that may arisefrom time-to-time with Dieci products.
PRODUCT SUPPORT
PARTS & SERVICE
2
3
SAFE, EASY OPERATIOND
Standard ANSI/ITSDF B56.6-2005,FOPS and ROPS. All elevated workplatforms have also been tested andcertified to CSA Standard B354.4-02.
ATP-BEYOND LOAD CHARTSImagine the potential consequencesof tipping a telehandler. Diecis ATP(Anti Tipping Protection) automatedoverload protection system bringspiece of mind. Dieci telehandlers areused in the construction rental marketand must be easy and safe to use evenfor inexperienced operators.ATPinsures that operators cannot tip themachine and loads are well withinthe operational parameters of themachine. Load cells located in theaxles take load measurements60 times per second. A signalis sent to a microprocessorthat automatically controlsHIGHLYand over rides the hydraulicMANEUVERABLEcylinders. As the operator movesIts not uncommon forhis load away from the centre ofCRABSTEERINGtelehandlers to encountergravity, a visual LED indicatorditches and other obstaclesbar displays the current loadin areas where they need toparameters. An additional safetyapproach walls and raiseaudible alarm will also warnand deliver supplies. Joboperators as they approachsites have become moremaximum lift. If the operatorcongested with multiplemoves past the safety envelopecontractors working on sites at thethe telehandlers hydraulic controls shutsame time. With a Dieci, you canflip the micro lever to skate aroundvirtually any obstacle with threesteering modes: Four-WheelSteer, the most common, turnsthe machine twice as fast.Front-Wheel Steer is fornormal all-around andhigh speed use. CrabSteer moves the machinediagonally to tack closerto structures and aroundobstacles. And all withfour-wheel drive traction.down until the load is retracted to a safeA rear axle oscillates toposition. ATP is standard on every Diecismooth out the bumps.telehandler.Anoptionalsteeringindicator is available tohelp align the wheels.SMOOTH JOYSTICK CONTROLSALL-WHEELSTEERINGControl is light, nimble and responsive.There are minimal levers, knobs andSAFETY CERTIFIEDswitches. Dieci telehandlers are designedAll Dieci telehandlers arefor precise handling and excellentCE certified and certifiedcontrol. The single loader lever combinesto the American Nationalraise/lower and crowd/dump functions
for easy single-handed operation. Firsta red dead man lever is deployed toactivate the joystick or thumb switch.This is important if you have a load liftedoverhead and the joystick is accidentallybumped. The joystick movements areintuitive and easy to understand. The flowsharing/ proportional joystick is top ofthe line, silky smooth and a pleasure tooperate. Coupled withan attachment tool,
POWER & CONTROL
DRIVING SIMPLICITYieci telehandlers are easy tooperate with basic functionsthat can be learned in seconds. Thedashboard and control layout is logical.The single joystick controls of the fixedarm telehandlers are intuitive. The pilotoperated joystick allows three boomfunctions to operate simultaneously. Athumb button operatestheauxiliaryhydraulicfunctions for work toolsrequiringmultiplehydraulicfunctions.Move the Switchgearforwardandstepon the pedal. Andchanging the twospeed transmission is apush of a button. That isas simple as it gets.
there is noend to what you cando. Up to three separateFRONT WHEELSTEERINGfunctions can be activatedat once. Extend the boomout. Lift the load. Dump thebucket. An example of howone motion can save time.The speed of the joystickdetermines the speed of thetool. Operators run Dieci telehandlers forlonger periods of time with less fatigueand operator inputs.
4
FIXED-ARM MODEL ENGINE:
HERCULES & ROTATIONAL BODY ENGINE:
STANDARD: IVECO NEF F4GE0454A - 101 HP - TCOPTIONAL: IVECO NEF F4GE0484A - 127 HP -TA
STANDARD: PERKINS 1104D-ETA - 144 HP - TAPERKINS 1106D-ETA - 196 HP
I
veco (Fiat) made diesel engines are Diecisprimary power source. Iveco is one of thelargest truck, bus, and diesel engine manufacturersin the world and renowned for reliability. Ivecoengines are used extensively in North America bysuch companies as New Holland, Case IH andMcCormick. For simplicity, Dieci uses one Ivecoengine available in Turbo-charged at 101 HP orTurbo After-Cooled at 127 HP. Iveco enginesadopt the most advanced technologies availableon the market today: innovative architecture, multivalve systems, turbo-compressors with fixed andvariable geometry, latest-generation mechanicalinjection systems, high pressure common railinjection.
5
T
he Perkins Turbo After-cooled engine is reservedfor the higher horsepower Dieci Hercules andRotational machines. The 144 HP engine is usedfor Hercules 120.10, Pegasus 40.25, 50.21, and60.16. The 196 HP engine is used for the Hercules160.10 and 210.10 models. For more than 75 yearsPerkins Engines Company has manufactured dieselengines and power solutions with the highest levelsof performance and reliability. Perkins parts areavailable from coast to coast with a distributor anddealer network in over 100 locations. The TurboAfter-cooled Perkins engine in Hercules and rotatingPegasus is the ultimate power solution. Increase inpower, lower fuel consumption and a minimal risein heat rejection. Noise is also minimized at thesource - engine sound levels have been reduced byup to 1 dBA. Perkins also have a low operating costwith low service intervals.
APOLLO ENGINE:STANDARD: YANMAR 4TNV98 - 71 HP
Y
anmar is renowned for building extremelyreliable compact diesel engines and is theperfect match for the Super Compact Apollo.This Yanmar 71 HP engine has one of the highestpower densities in its class and simply one of themost reliable compact diesel engines available.The TNV Series is a four-cylinder vertical, in-line,4-cycle, water-cooled diesel engine that utilizesindirect fuel injection. Common parts are readilyavailable through a North American wide Yanmardealer network.
POWERTRAIN & TRANSMISSIONFIXED-ARM MACHINE
ROTATIONAL BODY MACHINE
PEG
A40 SUS.25
GA
SU
S
IC4A0.1R7 TCUS
DANA & REXROTHMAXIMUM TRACTION &MAXIMUM CONTROLiecisopen-centerhydrostaticsystem working with Spicer axlesand drive shafts puts the power to theground. Try to get it stuck. The powerfuland efficient drive system enables a Diecitelehandler to work flexibly and preciselyin the most demanding situations. Danadrives are used by virtually every majoroff highway vehicle manufacturer. Danahas a track record for traction, steeringand reliability in rough terrain. Thetransmission is hydrostatically poweredby a8
D
9
premium Rexroth variable displacementpump and motor.Two-speed gearchanging and reverse is smooth andautomatic - provided by a servocontrolled electric-over hydraulic system.The planetary reduction provides amplefour-wheel drive traction.
The front axle is rigid and the rear axleoscillates to smooth out the bumps onjob sites. An inching pedal provideseven more control moving forward withprecision placement. The parkingbrake is a two wheel oil bathsystem with a manualoverride. Both front andback axles are steeringaxles allowing theoperator front-wheel, diagonal orfour wheel steering modes.
7
7
LOWER PIVOT POINTHIGHER PUSHING FORCETelehandlers with a lower pivot pointare designed to push more and can beused with a wide scope of attachments.Dieci telehandlers are designed with highmount cabs and side-mounted enginesthat provide excellent 360 visibility yetprovide a lower boom pivot. The toolhandling capabilities of Dieci telehandlersis a must on todays demanding highproductivity construction sites.
Telehandlers have evolved from simplepick and place machines to all aroundversatile work horses. With the rightmachine you can move, lift, level andplace snow, dirt, pallets, gravel, manure,bales, lumber and silage.
8
TransaxelDriveshaft2-speed transmissionHydraulic motorDiesel engineVariable displacement pumpHoses
8 Steering cylinder9 Planitary final drive
9
HIGH PERFORMANCE
PE
6
MODEL - ZEUS 33.11
7
TOP OF THE LINE HYDRAULICSFAST, CAPABLE HYDRAULICShe heart of a superior telehandler issuperior hydraulics. Dieci use top ofthe line hydraulics: variable displacementpumps, variable displacement motors, avariety of joysticks, solenoids, and controlblocks. The hydraulic focus was not onthe single hydraulic component but on thewhole machine function. Components are
T
made for each other; perfectly adjusted toeach other with a minimum of interfaces.Electrical, cable trays and hydrauliclines are neatly detailed and organized.This efficient hydrostatic drive system isreliable, economically efficient and theease of operation creates a superiortelehandler. Dieci pioneered the workinghydraulics, electric proportional pumpcontrol systems and the flow sharingcontrol. All joystick controls are preciseand smooth. Boom control is straightforward; telescope and lift functionsperform smoothly and precisely. The postspool pressure compensating on the mainimplement valve ensures three-functionflow sharing even when valve demandexceeds pump output. Flow sharing isachieved regardless of loading on eachcircuit, making smooth boom movementseasy even for inexperienced operators.Higher capacity hydraulic pumps areavailable.
The same concept holds true forthe use of other attachments. Manycontractors no longer feel the needto add backhoes or skid-steerloaders to their fleets to operateattachments, understanding theirtelehandlers can now handleaugers, sweepers and even smallhammers and breakers when notlifting heavy payloads.
STABILIZERS (OPTIONAL)
HYDRAULICS AT A GLANCE
At the flip of a switch, stabilizers arequickly deployed, levelling the machineand dramatically increasing the workinglift and reach envelope. Regardless of themachine being a fixed arm unit with twostabilizers or a rotational body unit withfour stabilizers, setting the side outriggersis fast. One or all four stabilizers can bedeployed at the same time to furtherincrease productivity.
Precise and smooth flow sharing/proportional joystick controls
AUXILIARY HYDRAULICS.A WORLD OF POSSIBILITIES.
Fast change of direction through variable displacement pump reversal
To get the most of your Dieci machine,optional multiple hydraulic ports arerecommended. The Dieci hydraulicsystem has 3300 psi of auxiliary pressureand up to 26 GPM of flow. At leastone single auxiliary hydraulic systemon telehandlers is preferred. Auxiliaryhydraulics allows the use of poweredattachments such as sweepers,augers and rotating andswing carriages. If themachine will be usedin cleanup work, adual-flow hydraulicsystem can actuatea grapple armor thumb on abucket to facilitateremovingbulkytrash and debris.
High handling capacity
Dieci telehandlersexcel at material-handling. The availableauxiliary hydraulic system opens up newpossibilities that tackle a wider variety ofjobs. Dieci telehandlers are a productivealternative to using a small wheel-loaderor backhoe. As long as operatorsavoid being overly aggressive andkeep the boom retracted when rootingand extracting material, a whole newdimension of productivity can be added
Hydrostatic four-wheel drive allows automotive steering with four-wheel drive traction Inching Pedal for sensitive load placements Wear-free braking and jerk- free acceleration
Diagnostic ports on all major hydraulic components
Additionally, to keep palletsparallel to the ground traditionaltelehandlers use secondary mastercylinders of equal displacement as theboom head cylinder. This second cylinderadds unnecessary frequently moving partsand often blocks the view of the operator.Dieci incorporates a patented design usinga cylinder within a cylinder to increasevisibility, longevity and reduce unnecessarycomponents.
HYDRAULIC SYSTEMS
without compromising the telehandlersoriginal strengths.
8
25
14
1
3
4
13
7
8
10
12
1011FIXED ARM CAB: STANDARD CAB FOR ALL MODELS,
9
VARIETY OF OPTIONS AVAILABLE
SPACIOUS MODERN CABSD
From the quiet climate controlled cabto the right side ergonomic armrest, tiltsteering column, rubberized controls,this cab is as good as they get. A wideswing-a-way door and 180 split windowswing and lock into place for enhancedcommunication between the operatorand ground crew. An overhead sunroofopens for fresh air. A chart holder putsoperating information within easy reach.The engine throttle and foot brake pedalsare positioned for comfortable use.Everything about the Dieci telehandlercab is designed with the operator inmind.
15 16
8
hours, comfort is important. Not only aretelehandlers in general enjoyable tooperate, the Dieci machines are a greatexperience. Quiet. Ergonomic. Modern.Operators will have less fatigue.INTUITIVE CONTROL LAYOUTSwitches have been grouped on thedashboard ahead of the joystick. Controls
9
are logical, visible and functional.The operator is simply pampered.Every function is neatly organizedwith unmatched automotive fit andfinish: oversized controls, rubberizedbuttons and an ergonomic proportionaljoystick all to maximize productivity.
6
7
1 Forward / Reverse Lever2Dash (Fuel Gauge/EngineTachometer w/Hour Meter/Temperature Gauge)3 Assortment of control switches4 Hi/Low Range SelectorSwitch (2-speed drive)5 ATP (Anti-tipping Protection)6 Transverse (SWAY) LevellingSwitch7 ATP (Anti-tipping Protection)Override Button
13
8Flow Sharing/ProportionalJoystick Control (4 in 1 shown)9 Stabilizer Raise/Lower Switch10 Adjustable Deluxe SuspensionSeat (Air-ride Optional)11 Tilt Steering Column12 Steering Mode Selector13 Boom Attachment Selector14 Emergency Stop15 Boom In/Out Control16 Auxiliary Control
52
1
13
12PRODUCTIVE OPERATORSA comfortable work environment canreduce operator turnover while allowingoperators to work more comfortably forlonger hours. Operators can sometimesbe difficult to find. While putting in longer
8APOLLO CAB
FIXED ARM CAB
ieci cabs are comfort redefined.This is not an after thought cab. Itis roomy, modern and it is not surprisingthat Dieci cabs are designed by an Italiancar designer. They are the most driverfocused telehandler cab on the market.The fully adjustable suspension seat is ascomfortable as it gets. A nicely paddedarm rest and steering wheel that tilts tofit the operator makes for an easier workday. All of the normal creature comfortsare standard and a Winter Comfort Kitis available.
10
APOLLO 25.6
M
ade for general construction, landscaping, lumber yards, nursery,industrial, agricultural and concrete work applications. Gorgeouscomfortable cab. Easy low-profile side access and an over-sized window.Unlike skid steer loaders, the operator does not have to step over the topof the attachment. Interchange skid steer attachments with a skid steeradapter. Dieci Apollo was designed with a very low machine height,tight turning radius, compact footprint and a side mounted Yanmardiesel engine with power to burn. The four-wheel drive traction will allow
11
operators to walk over a snow pile. Low-access buildings, barns,quonsets and parking garages are not a problem. When the jobsite is crowded, the last thing needed is another big machine tomanoeuvre. The Dieci Super Compact Apollo gets the job done.This machine is not only manoeuvrable with its three steeringmodes, but it can also lift, dump, place and reach. Ready forthe most crowded of job sites, these machines are the perfectcombination of agility, comfort and versatility.
Apollo 25.619 / 5,500lbs
APOLLO 25.62-10
3-3
6-4/6-6*/6-2**
10.6/12.5*/9**
7-92-611-7/11-9*/11-5**13-5
4-116
1
R14-1
-10
R4
R11
-8
*With 18 tires**With Mining tires
MAX 5,500 lbs20
6660
4030
10
0ft
2,900 lbs
10
2,200 lbs
5
1,800 lbs
20
0
10
10.7 ft
5
0
ON TIRES
SUPER COMPACT
0 B703,0 A604,050,5
50
15
19 ft
C
PERFORMANCEENGINEMaximum lifting capacity................................5,500 lbsYANMAR - 71 hp - Natural AspiratedMaximum lifting height ....................................19.0 ftMaximum power.......................................72 hp at 2,500 rpmMaximum reach...................................................11 ftType........................................four-stroke direct injection dieselFork angle..........................................................130Cylinders number and layout...........................4, vertical in lineTowing Force..................................................9,891 lbfDisplacement..........................................................203 cu.in.Maximum allowable slope....................................40%Cooling system...............................................................liquidTotal empty weight........................................10,560 lbsOPTIONAL EQUIPMENTMax speed (18 tire)...................................16mph (26 km/hr)Air conditioningSkid Steer Adapter BracketDRIVE SYSTEMHydraulic Quick AttachHydrostatic Transmission with variable displacement pumpAdditional Lighting PackagesHydraulic engine with.........................Automatic AdjustmentFront Glass GuardGear reversing..........................................Electro hydraulicAdditional hydraulics on boom headInching pedal for controlled movementAir ride seatSingle Speed TransmissionSTANDARD DEVICESElectronic Throttle Governor (3 speed settings)CE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02Closed soundproof cab ROPS - FOPS, with heating.HYDRAULIC CIRCUIThydraulic coupler on boom headGear pump at full capacity....................................21gal/minSelf-locking differential (limited slip 45%) on front axleMax working pressure......................................2901 PSIATP (Anti Tipping Protection) with block for hazardous movements3 in 1 Flow Sharing/Proportional joystick controls........optional 4 in 1DIFFERENTIAL AXLESSteering axles........................2, with planetary reduction gearsType of steering.................................4 wheel / crab / 2 wheelFront axle.......................................................................RigidRear axle................................................................OscillatingElectric Park BrakeTANK CAPACITYHydraulic circuit.......................................18 gallons / 70 litersFuel tank.................................................21gallons / 80 liters
TIRESStandard (INDUSTRIAL LUG)........12-16.5 N.H.S.
Optional (INDUSTRIAL LUG)....12.0/75-18 TR-03
Optional (MINING TIRE)....................28x12.5-15
12
Dedalus 26.620 / 5,800lbs
Dedalus 28.721 / 6,200lbs
Dedalus 28.929 / 6,200lbs
Dedalus 30.721 / 6,600lbs
Dedalus 30.929 / 6,600lbs
DEDALUS 28.7
T
he Dedalus Family is a step up from the Apollo exceeding it in lift height, capacity andhorsepower while maintaining a low profile. Like all Dieci telehandlers, they are multifunction machines and can be used for many operations.Operators who own the Dedalus do not know what they would do without them. They handlean endless number of tasks that no other tool can handle. Telehandlers are also a commonworkhorse on many European job sites and farms and North Americans are starting to see why.
13
The Dedalus machines can lift as high as 21 feet twice the height of a tractor. The machine isnimble and can move in directions normally not possible and with the four-wheel drive power.Dedalus makes quick use of attachments from pallet forks to buckets all with a slick hydraulicQuick-Tach system so you can stay in the cab while changing attachments, any attachment.There are also adaptors available to convert the Dedalus for Skid Steer attachments as well.
DEDALUS 28.7
3'-0"R16'-1"
-6"
R5'
R13'-1
"
6'-7"
1'-2"
9'-2"
5'-3"
12'-11"
6'-7"
15'-4"
MAX 6,200 lbs60
64
B4,400 lbs
50
15
4030
10
21 ft
CA6,180
20
6,200
20
0
ft 15
10
3,300 lbs5
0
12 ftON TIRES
LOW PROFILE
0
2,200 lbs
10
1,550 lbs
5
PERFORMANCEENGINEMaximum lifting capacity.........................................6,200 lbsPERKINS Turbo-charged 1104D-44TMaximum lifting height..................................................21 ftMaximum power.....................................101 hp at 2,200 rpmMaximum reach...........................................................12 ftType........................................four-stroke direct injection dieselFork angle.................................................................130Cylinders number and layout...........................4, vertical in lineTowing Force........................................................16,410 lbfDisplacement..........................................................274 cu.in.Breakout Force.....................................................12,814 lbfCooling system...............................................................liquidMaximum allowable slope..........................................40%Total empty weight................................................13,200 lbsOPTIONAL EQUIPMENTMax speed.................................................22mph (35 km/hr)Air conditioningSkid Steer Adapter BracketDRIVE SYSTEMHydraulic Quick AttachHydrostatic Transmission with variable displacement pumpAir-Ride SeatHydraulic engine................................Automatic adjustmentAdditional Lighting PackageGear reversing..........................................Electro hydraulicSun ScreenInching pedal for controlled movementFront Glass GuardServo controlled 2 speed gearboxAdditional Hydraulics on Boom HeadHYDRAULIC CIRCUITSTANDARD DEVICESGear pump at full capacity...................................23 gal/minMax working pressure.....................................3,336 PSICE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02Flow Sharing/Proportional joystick controls......................4 in 1Closed soundproof homologated cab ROPS - FOPS, with heatingHydraulic coupler on boom headDIFFERENTIAL AXLESSelf-locking differential (LIMITED SLIP 45%) on front axleSteering axles....................2, with planetary reduction gearsATP(Anti-tipping Protection) with block for hazardous movementsType of steering............................4 wheel / crab / 2 wheelFront axle...................................................................RigidTIRESRear axle...........................................................OscillatingStandard (INDUSTRIAL LUG).................12.5/18Electric Park BrakeTANK CAPACITYHydraulic circuit.....................................34 gallons / 130 litersFuel tank...............................................26gallons / 100 liters
14
ZEUS 33.11
Z
Zeus 33.1136 / 7,300lbs
Zeus 37.724 / 8,200lbs
eus machines are nimble and small enough to work around tight job sites with an insideturning radius of just 48 ideal for both Agricultural and Construction applications. Zeus33.11 lifting capacity of 7,300 lbs with a lift height of 36 feet equipped with very compact
15
Zeus 37.826 / 8,200lbs
Zeus 35.1032 / 7,700lbs
Zeus 38.1032 / 8,400lbs
designed front stabilizers that when deployed do not exceed 76. If youre looking to work intight confines and still need excellent lift capacity, the Zeus can do the job for you with its shortwheel base giving it a tighter turning radius and ample lifting power.
3'-0"
R16'-7"
R12'-
7"
7'-6" / 7'-8" *
1'-5" / 1'-7" *
R4'-1"
ZEUS 33.11
8'-6"13'-4" / 13'-6" *17'-3"
MAX 7,300 lbs
70
35
25
30
ED
20
3015
A
30
BA
20
24 ft
15
10
5,300 lbs
3,750 lbs
2,650 lbs
2,000 lbs
880 lbs
1,300 lbs
440 lbs
220 lbs
4,850 lbs
4,000 lbs
3,300 lbs
2,650 lbs
1,800 lbs
2,200 lbs20
10
5
0 0
5
0
WITH STABILIZERS
ft
24 ft
20
15
10
PERFORMANCEMaximum lifting capacity................................... .....7,300lbsMaximum lifting height....................................................36 ftMaximum reach..............................................................24 ftFork angle.....................................................................130Towing force.........................................................16,410 lbfBreakout Force......................................................12,814 lbfMaximum allowable slope...............................................40%Total empty weight................................................18,260 lbsMax speed.................................................19 mph (30km/hr)(on request 25 mph (40km/hr) with TA engine)DRIVE SYSTEMHydrostatic Transmission with variable displacement pumpHydraulic engine.........................................Automatic changeGear reversing..............................................Electro hydraulicInching pedal for controlled movementServo controlled 2 speed gearbox
5
0
ON TIRES
MULTITASKING
ft
C
10
1,300 lbs
0 0
D
15
10
10
E
20
20
5
F
40
B
35 ft
G
50
25
C
7,300 lbs
40
70
35
60
F
6,000 lbs
50
36 ft
G
6030
*Height varieswith tire option
7,300 lbs
MAX 7,300 lbs
5'-10"7'-3"
ENGINEIVECO NEF F4GE0454A - Turbo-chargedMaximum power.....................................101 hp at 2200 rpmType......................................four-stroke direct injection dieselCylinders number and layout..........................4, vertical in lineDisplacement.........................................................274 cu. in.Cooling system..............................................................liquidIVECO NEF F4GE0484C - Turbo After Cooler (Optional)Maximum power....................................127 hp at 2,200 rpmOperating principle............................four-stroke engine dieselCylinders number and layout..........................4, vertical in lineDisplacement...............................................................274 cu. in.Cooling system..............................................................liquidTANK CAPACITYHydraulic circuit.....................................37gallons / 140 litersFuel tank..................................................25gallons / 95 liters
STANDARD DEVICESCE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02Hydraulic coupler on boom headC losed soundproof homologated cab ROPS - FOPS, with heatingSelf-locking differential (LIMITED SLIP 45%) on front axleATP (Anti-tipping protection) with block for hazardous movements
HYDRAULIC CIRCUITGear pump at full capacity......................................26gal/minMax working pressure...............................................3336PSI3 in 1 Flow Sharing/Proportional joystick controlTIRESDIFFERENTIAL AXLESStandard (INDUSTRIAL LUG).................16/70x20 Steering axles......................2, with planetary reduction gearsType of steering............................4 wheels / crab / 2 wheelsFront axle......................................Rigid (levelling on request)Rear axle..............................................................OscillatingOptional (INDUSTRIAL LUG)..............405/70x24Electric Park BrakeOptional (OVERSIZED)...................445/65-22.5
16
Runner 40.1341 / 9,000lbs
Runner 35.724 / 7,700lbs
Runner 35.1239 / 7,700lbs
RUNNER 40.13
T
he Runner is a contractors best tool and an all around workhorse for most buildingapplications. They are the perfect rough terrain telehandler used in the rental market fortheir capacities, simple boom, durability and ease of use. They have the best lift and capacityfor most midrange construction applications. With a lift capacity of 9,000 LBS and 41 footreach of smooth two-section maintenance free boom, this machine performs at any jobsite.Day in. Day out.
17
Equipped with twin front axle-mounted stabilizers, sway control, ATP Anti Tipping Protection aswell as a panoramic view cab. Productivity will increase as operators are safe and comfortableduring long work days. Features such as three steering modes, four-wheel drive and fourin-one proportional joystick control offer smooth, reliable performance for rugged work siteconditions. Runners are not just strictly pick and place tools either. They can be used to cleanup job sites with a dozer blade or bucket with its low pivot point boom. Most attachments areavailable on a Runner providing total versatility.
RUNNER 40.133'-0"
1'-5" / 1'-7" *
R4 '
R14'-11
R12'-10
MAX 9,000 lbs
41 ft
70
20
A
5,300 lbs
3,750 lbs
1,800 lbs
10
B
9,000
20
660 lbs
9,000
5
0-5ft
30
10
6,600 lbs
5,750 lbs
4,850 lbs
3,750 lbs
2,650 lbs
2,200 lbs
10
1,650 lbs
5
25
15
10
C
A
1520
D
40
1,100 lbs
30
B
E
50
330 lbs
20
7,700 lbs
40
25
60
30
C
F
6,000 lbs
D
41 ft
70
35
E
50
30
40
F
60
35
MAX 9,000 lbs
2,650 lbs
40
*Height varieswith tire option
0
29 ft
25
20
15
10
5
0
WITH STABILIZERS
-5
ft
29 ft
25
20
15
PERFORMANCEMaximum lifting capacity...........................................9,000lbsMaximum lifting height......................................................41ftMaximum reach................................................................29ftFork angle.....................................................................134Towing force...........................................................16,410 lbfBreakout Force........................................................12,814 l bfMaximum allowable slope...............................................40%Total empty weight..................................................22,220 lbsMax speed...................................................19mph (30km/hr)(on request 25 mph (40km/hr) with TA engine)DRIVE SYSTEMHydrostatic Transmission with variable displacement pumpHydraulic engine....................................Automatic adjustmentGear reversing..............................................Electro hydraulicInching pedal for controlled movementServo controlled 2 speed gearbox
10
5
0
ON TIRES
CONTRACTOR / RENTAL
8'-1" / 8'-2" *
-2
6'-3"7'-7"8'-2"
8'-6"13'-0" / 13'-2" *18'-3"
ENGINEIVECO NEF -Turbo-chargedMaximum power......................................101 hp at 2,200 rpmType........................................four-stroke direct injection dieselCylinders number and layout..........................4, vertical in lineDisplacement.........................................................274 cu. in.Cooling system..............................................................liquidIVECO NEF F4GE0484C- Turbo After-Cooled (Optional)Maximum power......................................127 hp at 2,300 rpmType......................................four-stroke direct injection dieselCylinders number and layout...........................4, vertical in lineDisplacement......................................................... 2 74 cu. in.Cooling System...............................................................liquidTANK CAPACITYHydraulic circuit.......................................................44gallonsFuel tank..................................................................28gallons
STANDARD DEVICESCE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02HYDRAULIC CIRCUITATP (Anti-tipping protection) with block for hazardous movementsGear pump at full capacity......................................26gal/minHydraulic coupler on boom headMax working pressure...............................................3,336PSIC losed soundproof homologated cab ROPS - FOPS, with heatingSelf-locking differential (LIMITED SLIP 45%) on front axle3 in 1 Flow Sharing/Proportional joystick control (optional)Stabilizers with independent hydraulic tiltingFront StabilizersDIFFERENTIAL AXLESTransverse (Sway) levelingSteering axles.......................2, with planetary reduction gearsType of steering.............................4 wheels / crab / 2 wheelsTIRESFront axle.......................................Rigid (levelling on request)Standard (INDUSTRIAL LUG)..................16/70x20OPTIONAL EQUIPMENTAir Conditioning72 Fork CarriageHooks/Jibs/Man basketsSide-shift for fork carriage
Optional (INDUSTRIAL LUG).................405/70x24
Optional (OVERSIZED)......................445/65-22.5
18
ICARUS 45.17
I
Icarus 45.1756 / 10,000lbs
Icarus 35.1342 / 7,700lbs
carus is all about height and reach. With a 10,000 LB lift capacity and a lift height of 56 feet,these machines are versatile at any worksite. Man and material placement is fast, smoothand easy. Icarus telehandlers are used for normal multitasking jobs and are suited for work thatrequires extraordinary lift heights. Hydraulic self levelling lift action automatically keeps the loadlevel as the three-section boom is raised and extended. Icarus safely works in harmony with a manbasket or material basket nearly six stories in the air thanks to Diecis ATP (Anti Tipping Protection).
19
Icarus 38.1444 / 8,400lbs
Icarus 40.1444 / 9,000lbs
Icarus 40.1756 / 8,800lbs
Icarus is equipped with twin front axle-mounted stabilizers, sway control for rough terrain anda modern panoramic view cab. Visibility for tall projects is excellent with floor to ceiling heatresistant glass. Icarus has three steering modes with a four-wheel drive hydrostatic two speedtransmission for rugged terrain. The four-in-one proportional joystick provides the operatorwith silky smooth safe movements.
ICARUS 45.173'-1"
R5
'-7
"
R14'-5"
8'-4" *
R16'-1"
1'-5" *
6'-4"7'-8"
20'-6"
10'-9"
MAX 10,000 lbs
MAX 10,000 lbsI
60
F
40
CB
30
A
20
ED
3030
25
40
30
25
20
15
10
BA
5,500 lbs6,600 lbs7,700 lbs
4,400 lbs
4,000 lbs
3,300 lbs
2,900 lbs
2,200 lbs
10
1,800 lbs
5
C
20
10
10,000 lbs
6,600 lbs
4,400 lbs
3,300 lbs
2,200 lbs
660 lbs
35
38 ft
1,100 lbs1,550 lbs
10
15
0-5ft
F
40
1,300 lbs
20
105
G
20
220 lbs
15
56 ftIH
50
35
D
3025
60
40
E
35
2,5
45
G
50
70
50
H
45
55
05
0
ON TIRES
-5ft
40
42 ft
35
30
25
20
PERFORMANCEMaximum lifting capacity........................................10,000 lbsMaximum lifting height.....................................................56 ftMaximum reach...............................................................42 ftFork angle.......................................................................134Towing Force.......................................16,410 lbf (7,300 daN)Breakout Force....................................12,814 lbf (5,700 daN)Maximum allowable slope................................................40%Total empty weight..................................................26,455 lbsMax speed.................................................19 mph (30 km/hr)(on request 25 mph (40 km/h) with TA engine)
15
10
5
0
WITH STABILIZERS
HIGH REACH
70
50
56 ft
10,000 lbs
55
40
* Height varieswith tire option
9'-8"16' *
ENGINEIVECO NEF - Turbo-chargedMaximum power.....................................101 hp at 2,200 rpmType.......................................Four stroke direct injection dieselCylinders number and layout...........................4, vertical in lineDisplacement.........................................274 cu.in. (4485 cm)Turbo CompressorLiquid Cooling System
IVECO NEF - Turbo After -Cooled (Optional)Maximum power.....................................127 hp at 2,200 rpmDRIVE SYSTEMType.......................................Four stroke direct injection dieselHydrostatic Transmission.........with variable displacement pumpCylinders number and layout...........................4, vertical in lineHydraulic engine..............................with automatic adjustmentDisplacement.........................................274 cu.in. (4485 cm)Gear reversing............................................electro - hydraulicLiquid Cooling SystemInching pedal for controlled movementServo controlled 2 speed gearboxTANK CAPACITYHydraulic circuit........................................42gallons/160 litresHYDRAULIC CIRCUITFuel tank..................................................28gallons/105 litresGear pump at full capacity....................29 gal/min (110 l/min)Max working pressure...............................3,336 PSI (230 bar)STANDARD DEVICES3-in-1 Flow Sharing/Proportional joystick controlsCE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02Soundproof closed cab, ROPS - FOPS approved, with heatingDIFFERENTIAL AXLESSteering axles........................2, with planetary reduction gearsHydraulic coupler for any accessories on the boom headType of steering.................................4 wheel / crab / 2 wheelSelf-locking differential (LIMITED SLIP 45%) on front axleFront axle.........................................Rigid (leveling on request)Front Stabilizers. Transverse (Sway) LevelingRear axle................................................................OscillatingATP (Anti Tipping Protection) with block for hazardous movementsService brake......Oil bath on the four wheels with double hydraulic systemElectric parking brake.TIRESStandard (INDUSTRIAL LUG)...............405/70-24OPTIONAL EQUIPMENTAir Conditioning72 Fork CarriageHooks/Jibs/Man basketsSide-shift for fork carriage
Optional (OVERSIZED)............................18-22.5
20
SAMSON 45.8
T
his machine has been a favorite among equipment dealers and manufacturers withintheir own operation. When muscle is more important than height, the Samson 45.8 is theanswer. The machine is designed to have ample lift capacity without the use ofstabilizers. Samson models use the simplicity and strength of a single boom.Designed for heavy lifting requirements the Samson also offers stabilityand power. The visibility is fantastic for the operator and the cab andcontrol functions are both comfortable and easy to use.
Samson 45.826 / 10,000lbs
21
Samson 40.1136 / 9,000lbs
3'-1"
R12'-10"
8'-1" *
R4
R13'-5"
'-2"
SAMSON 45.8
1'-5" *
6'-3"7'-7"
8'-6"13'-1" *16'-2"
* Height varieswith tire option
MAX 10,000 lbs26 ft
70
2560
BA
50
2040
1530
10
7,700 lbs
10,000 lbs
6,000 lbs
10
4,850 lbs
5
3,550 lbs
20
0
15 ft
10
5
0
ON TIRES
PERFORMANCEMaximum lifting capacity........................................10,000 lbsMaximum lifting height....................................................26ftMaximum reach...............................................................15ftFork angle.....................................................................134Towing fore.............................................................16,410 lbfBreakout Force........................................................12,814 l bfMaximum allowable slope...............................................40%Total empty weight..................................................16,060 lbsMax speed.................................................19 mph (30km/hr)(on request 25 mph (40km/hr) with TA engine)DRIVE SYSTEMHydrostatic Transmission with variable displacement pumpHydraulic engine....................................Automatic adjustmentGear reversing..............................................Electro hydraulicInching pedal for controlled movementServo controlled 2 speed gearbox
ENGINEIVECO NEF -Turbo-ChargedMaximum power....................................101 hp at 2,200 rpmType.......................................four-stroke direct injection dieselCylinders number and layout...........................4, vertical in lineDisplacement..........................................................274 cu. in.Cooling system...............................................................liquid
HEAVY LIFT
ft 15
IVECO NEF F4GE0484C Turbo After-Cooled (optional)Maximum power......................................127 hp at 2,300 rpmType........................................four-stroke direct injection dieselCylinders number and layout...........................4, vertical in lineDisplacement..........................................................274 cu. in.Cooling system..............................................................liquidTANK CAPACITYHydraulic circuit......................................41gallons / 155 litersFuel tank................................................28gallons / 105 liters
HYDRAULIC CIRCUITSTANDARD DEVICESGear pump at full capacity.....................................26gal/minCE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02Max working pressure..............................................3,336PSIHydraulic coupler on boom head3 in 1 Flow Sharing/Proportional joystick control (optional)C losed soundproof homologated cab ROPS - FOPS, with heatingSelf-locking differential (LIMITED SLIP 45%) on front axleDIFFERENTIAL AXLESATP (Anti-tipping Protection) with block for hazardous movementsSteering axles........................2, with planetary reduction gearsType of steering.............................4 wheels / crab / 2 wheelsFront axle.......................................Rigid (levelling on request)TIRESRear axle...............................................................OscillatingOPTIONAL EQUIPMENTAir Conditioning72 Fork CarriageHydraulic Quick AttachmentHydraulic fork positioningSide-shift for fork carriageTransverse (sway) leveling
Standard (INDUSTRIAL LUG)................16/70x20Optional (INDUSTRIAL LUG)...............405/70x24Optional (OVERSIZED)....................445/65-22.5
22
SAMSON 65.8
D
esigned for heavy lifting requirements, up to 14,350 LB lift capacity and a liftheight of 25, the Samson 65.8 offers stability, power and reach. The visibility isfantastic for the operator and the cab and control functions are both comfortable andeasy to use.
Samson 65.825 / 14,350lbs
23
Samson 60.929 / 13,200lbs
SAMSON 65.83-1
3-10
9-214-7 *16-5
3-5
-7
R58-2 *
1-4 *
R15
R14
-6
6-49-7
MAX 14,350 lbs69
25
60
40
15
30
20
10
0
0-2
ft
15
10
13.8 ft
5
0
ON TIRES
PERFORMANCETIRESMaximum lifting capacity.......................................14,350 lbsStandard (INDUSTRIAL LUG)...........17.5 - 22.5Maximum lifting height................................................25.2ftMaximum reach..........................................................13.8ftENGINEFork angle..................................................................144IVECO NEF F4GE0484C - Turbo After-CooledTowing force..........................................................16,410 lbfMaximum power.....................................127 hp at 2,200 rpmBreakout Force.......................................................12,814 lbfType........................................four-stroke direct injection dieselMaximum allowable slope....................................................40%Cylinders number and layout...........................4, vertical in lineTotal empty weight.................................................23,980 lbsDisplacement..........................................................274 cu. in.Max speed............................. ..................24 mph (38 km/hr)Cooling system...............................................................liquidDRIVE SYSTEMTANK CAPACITYVS Vario System Hydrostatic TransmissionHydraulic circuit..................................................42 gallons3 Dive Modes (Automotive, Loader, Creeper)Fuel tank.............................................................33 gallonsElectro-Hydraulic ReversingSTANDARD DEVICESElectronic Inching PedalCE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02-orClosed soundproof homologated cab ROPS - FOPS, with heating2-Speed HydrostaticVariable Displacement PumpHydraulic coupler on boom headAutomatic Variation on Hydrostatic MotorSelf-locking differential (LIMITED SLIP 45%) on front axleElectro-Hydraulic ReversingRoad Light Package (head lights, tail lights, signal flashers, brakeInching Pedallights and the flashing strobe)Servo Controlled 2 Speed Gear box Power WindowsATP(Anti-tipping Protection) with block for hazardous movementsHYDRAULIC CIRCUITOPTIONAL EQUIPMENTGear pump at full capacity....................................26gal/minAir ConditioningMax working pressure.....................................3,336 PSIRear Hydraulics4 in 1 Flow Sharing/Proportional joystick controls (optional)Hydraulic Reversing FanHydraulic Quick AttachDIFFERENTIAL AXLESSteering axles........................2, with planetary reduction gearsEasy Ride Boom SuspensionType of steering..............................4 wheels / crab / 2 wheelsAir-Ride SeatFront axle........................................Rigid (levelling on request)Assorted Degelman-made Buckets & AttachmentsRear axle................................................................OscillatingAdditional Lighting PackagesElectric Park BrakeSun Screen
HEAVY LIFT
5
4,400 lbs5,100 lbs6,200 lbs7,500 lbs9,250 lbs11,700 lbs
10
25.2 ft
114 3,25,350 0 lbslbs
50
20
EDCBA
24
SAMSON 70.10
T
he Samson 70.10 features a 15,500 LB lift capacity witha single section extending boom and can lift and reach31 feet out. The carriage is a heavier design and the forksare also deeper and wider to accommodate the bigger loads.Optional twin front axle-mounted stabilizers provide evengreater lifting capacities and stability to the Samson 70.10.
25
Samson, like all Dieci telehandlers, uses ATP Anti TippingProtection technology for safe worry-free operations. Domore in a day with the traction, manoeuvrability and heavylifting capacity from the comfort of a modern spacious cab.
Samson 70.1031 / 15,500lbs
R14'-5"
8'-2" *
R5
R15'-6"
'-7
3'-1"
"
SAMSON 70.10
1'-5" *
6'-4"7'-9"8'-10"
9'-8"15'-10" *19'-5"
* Height varieswith tire option
MAX 15,500 lbs70
30
31 ft
ED
60
C
25
B
50
s
A
lb
20
15
9,000 lbs11,000 lbs
10
6,600 lbs
20
5,500 lbs
5
30
4,400 lbs
10
15,500
13
,2
50
40
0
18 ft
15
10
5
0
ON TIRES
PERFORMANCEENGINEMaximum lifting capacity.......................................15,500 lbsIVECO NEF F4GE0484C - Turbo After-cooledMaximum lifting height...................................................31ftMaximum power.....................................127 hp at 2,200 rpmMaximum reach............................................................18ftType........................................four-stroke direct injection dieselFork angle..................................................................134Towing force..........................................................16,410 lbfCylinders number and layout...........................4, vertical in lineBreakout Force.......................................................12,814 lbfDisplacement..........................................................274 cu. in.Maximum allowable slope....................................................40%Cooling system...............................................................liquidTotal empty weight.................................................24,860 lbsMax speed............................. ..................19 mph (30 km/hr)TANK CAPACITY(on request 25 mph (40 km/hr) with TA engine)Hydraulic circuit..................................................42 gallonsFueltank.............................................................28 gallonsDRIVE SYSTEMHydrostatic Transmission with variable displacement pumpSTANDARD DEVICESHydraulic engine................................Automatic adjustmentCE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02Gear reversing..........................................Electro hydraulicHydraulic coupler on boom headInching pedal for controlled movementClosed soundproof homologated cab ROPS - FOPS, with heatingServo controlled 2 speed gearboxSelf-locking differential (LIMITED SLIP 45%) on front axleATP(Anti-tipping Protection) with block for hazardous movementsHYDRAULIC CIRCUITGear pump at full capacity....................................26gal/minTIRESMax working pressure.....................................3,336 PSIStandard (INDUSTRIAL LUG)...........445/65-22.53 in 1 Flow Sharing/Proportional joystick control (optional)DIFFERENTIAL AXLESSteering axles........................2, with planetary reduction gearsOptional (INDUSTRIAL ROAD)......445/65 R 22.5Type of steering..............................4 wheels / crab / 2 wheelsFront axle........................................Rigid (levelling on request)Rear axle................................................................OscillatingElectric Park BrakeOPTIONAL EQUIPMENTAir ConditioningFront StabilizersTransverse (Sway) LevelingHydraulic Fork PositioningSide-Shift for Fork Carriage
HEAVY LIFT
ft
26
HERCULES 120.10
E
xtreme lifting capacity in a telehandler. The 120.10 Hercules model can impressivelylift up to 26,400 lbs. and reach up to 31ft with its strong single boom. With thissize of machine, we need all the controls from the cab with features like Quick-Tach, ForkPositioning and Side Shift. The Hercules is outfitted with the same new style cab as thePegasus complete with anti-tipping as well. Loading and positioning is safe as the ATP antitipping protection protects the machine from over-loading.The Hercules 120.10 is powered by a 4 cylinder - 144 horsepower Perkins engine.New model Hercules 100.10 is powered by a 4 cylinder - 175 horsepower Iveco engine.
27
New Model Available
Hercules 120.1031 / 26,400lbs
Hercules 100.1031 / 22,000lbs
R5'-11"
HERCULES 120.103'-3"
9'-5" *
RR1 15'-15'- 1"5"
1'-9" * 11'-0"18'-3" *20'-3"
4'-3"
5'-0"
6'-6"7'-11"
* Height varieswith tire option
MAX 26,400 lbs30
60
0 D,5015 00 C5,16s Blb50 s A,7lb8100,022
50
25
ft 20
10
0-3
15
16 ft
10
5
0
ON TIRES
EXTREME LIFT
0
20
6,600 lbs7,700 lbs9,700 lbs11,500 lbs13,900 lbs
5
26
30
1510
,4
00
lb
s
40
20
31 ft
PERFORMANCEMaximum lifting capacity.......................................26,400 lbsMaximum lifting height....................................................31 ftMaximum reach..............................................................16 ftFork angle......................................................................120Breakout Force..................................25,630 lbf (11,400 daN)Maximum allowable slope................................................39%Total empty weight..................................................36,820 lbsMax speed.................................................17 mph (28 km/h)
ENGINEPERKINS 1104D ETA -Turbo After-CooledMaximum power.....................................144 hp at 2,200 rpmType.....................4 stroke direct injection diesel, Common-RailCylinders number and layout..........................4, vertical in lineDisplacement........................................268 cu.in. (4,399 cm)Cooling System.............................................................LiquidElectronic acceleratorEngine glow plugs for cold climates
DRIVE SYSTEMHydrostatic Transmission with variable displacement pumpHydraulic engine..............................with automatic adjustmentGear reversing............................................electro - hydraulicInching pedal for controlled movementServo controlled 2 speed gearbox
TANK CAPACITYOil tank..................................................79 gallons/300 litresFuel tank.................................................71 gallons/270 litersSTANDARD DEVICESCE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02Soundproof closed cab, ROPS - FOPS approved, with heating.Engine air pre-filter.Hydraulic coupler on the boom head.Self-locking front axle differential (limited slip 45%).ATP (Anti Tipping Protection) with block for hazardous movements.
HYDRAULIC CIRCUITGear pump...............14 gal/min-2,900 PSI (53 l/min-200bar)Variable delivery pump....42 gal/min-4,060 PSI (160 l/min-280 bar)Distributor control with joystick.......................................4-in-1OPTIONAL EQUIPMENTSimultaneous movements......................................................4Air ConditioningProportional control distributor Load Sensing with Flow SharingAir ride seatDIFFERENTIAL AXLESTIRESSteering axles........................2, with planetary reduction gearsStandard (INDUSTRIAL)...............16-R25 x XR-B Type of steering................................4 wheel / crab / 2 wheelFront axle.......................................................................RigidRear axle...............................................................OscillatingService brake.................................Oil bath on the four wheelsElectric parking brake
28
HERCULES 160.10
I
ntroducing the ultimate lifting capacity in a telehandler, the NEWHercules models. The 160.10 model Hercules can lift up to 35,200lbs. and reach up to 33ft with its strong single boom.With this size of machine, we need all the controls from the cab withQuick-Tach, Fork Positioning and Side Shift. The Hercules is outfittedwith the same new style cab as the Pegasus complete with anti-tipping
29
as well. Loading and positioning is safe as the ATPanti tipping protection protects the machine fromover-loading.The Hercules 160.10 is powered by a 6 cylinder 196 horsepower Perkins engine.
Hercules 160.1033 / 35,200lbs
HERCULES 160.10R8
'-8
"
3'-3"
R1
9'-6"
R8'- 19'2"
1'-9"
4'-4"
12'-2"20'-4"21'-8"
5'-2"
6'-7"8'-2"
MAX 35,250 lbs60
3050
25
33.5 FT
lb
s
40
EDCs Blb05s A,5lb27 50,803,2
50
20
35
30
15
ft 20
24,250 lbs
19,400 lbs
15,900 lbs
0-3
15
16.9 FT
10
5
0
ON TIRES
PERFORMANCEMaximum lifting capacity.......................................35,200 lbsMaximum lifting height....................................................31 ftMaximum reach..............................................................17 ftFork angle......................................................................120Breakout Force..................................36,420 lbf (16,200 daN)Maximum allowable slope................................................35%Total empty weight..................................................52,250 lbsMax speed..............................................16 mph / (25 km/h)DRIVE SYSTEMHydrostatic Transmission with variable displacement pumpHydraulic engine..............................with automatic adjustmentGear reversing............................................electro - hydraulicInching pedal for controlled movementServo controlled 2 speed gearbox
EXTREME LIFT
0
13,200 lbs
10
5
11,000 lbs
20
10
ENGINEPERKINS 1106D ETA - Turbo After-CooledMaximum power.....................................196 hp at 2,200 rpmType.....................4 stroke direct injection diesel, Common-RailCylinders number and layout..........................6, vertical in lineDisplacement........................................402 cu.in. (6,598 cm)Turbo CompressorCooling System.............................................................LiquidElectronic acceleratorGlow plugs for cold climatesTANK CAPACITYOil tank..................................................79 gallons/300 litresFuel tank.................................................71 gallons/270 litersSTANDARD DEVICESCE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02Soundproof closed cab, ROPS - FOPS approved, with heating.Engine air pre-filter .Deluxe, suspension, cloth seat.Hydraulic couple on the boom head.ATP (Anti Tipping Protection) with block for hazardous movements.
HYDRAULIC CIRCUITGear pump...............14 gal/min-2,900 PSI (53 l/min-200bar)Variable delivery pump....45 gal/min-5,076 PSI (170 l/min-350 bar)Distributor control with joystick.......................................4-in-1Simultaneous movements......................................................4OPTIONAL EQUIPMENTProportional control distributor Load Sensing with FlowAir ConditioningSharingAir ride seatDIFFERENTIAL AXLESTIRESSteering axles........................2, with planetary reduction gearsStandard (INDUSTRIAL)...............18-R25 x XR-B Type of steering................................4 wheel / crab / 2 wheelFront axle......................................................................RigidRear axle...............................................................OscillatingService brake.................................Oil bath on the four wheelsElectric parking brake.
30
HERCULES 210.10
I
ntroducing the ultimate lifting capacity in a telehandler, the NEW Herculesmodels. The 210.10 model Hercules can lift up to 46,200 lbs. and reach upto 33ft with its strong single boom.With this size of machine, we need all the controls from the cab withQuick-Tach, Fork Positioning and Side Shift. The Hercules is outfittedwith the same new style cab as the Pegasus complete with anti-tipping
31
as well. Loading and positioning is safe as the ATPanti tipping protection protects the machine fromover-loading.The Hercules 210.10 is powered by a 6 cylinder 196 horsepower Perkins engine.
Hercules 210.1033 / 46,200lbs
HERCULES 210.10R9
'-3
"
3'-3"
9'-7"
RR1 19'-19'- 01"
1'-9"
4'-4"
12'-4"20'-4"22
5'-4"
6'-11"8'-11"
MAX 46,200 lbs33.5 FTED00,0s Clb320B0s,3lbA3500,840
60
3050
25
00
lb
s
40
slb
46
,2
20
30
15
ft 20
25,400 lbs
21,000 lbs
0-3
15
16.9 FT
10
5
0
ON TIRES
EXTREME LIFT
0
17,650 lbs
10
5
15,400 lbs
20
10
PERFORMANCEMaximum lifting capacity.......................................46,200 lbsMaximum lifting height....................................................33 ftMaximum reach..............................................................17 ftFork angle......................................................................120Breakout Force..................................42,500 lbf (18,900 daN)Maximum allowable slope................................................35%Total empty weight..................................................60,400 lbsMax speed................................................16 mph (25 km/hr)
ENGINEPERKINS 1106D ETA - Turbo After-CooledMaximum power.....................................196 hp at 2,200 rpmType.....................4 stroke direct injection diesel, Common-RailCylinders number and layout..........................6, vertical in lineDisplacement........................................402 cu.in. (6,598 cm)Cooling System.............................................................LiquidElectronic acceleratorGlow plugs for cold climates
DRIVE SYSTEMHydrostatic Transmission with variable displacement pumpHydraulic engine..............................with automatic adjustmentGear reversing............................................electro - hydraulicInching pedal for controlled movementServo controlled 2 speed gearbox
TANK CAPACITYOil tank..................................................79 gallons/300 litresFuel tank.................................................74 gallons/280 liters
STANDARD DEVICESCE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02Soundproof closed cab, ROPS - FOPS approved, with heating.High efficiency cyclone air filter.Deluxe, suspension, cloth seat.Hydraulic coupler on the boom head.ATP (Anti Tipping Protection) with block for hazardous movements.
HYDRAULIC CIRCUITGear pump...............14 gal/min-2,900 PSI (53 l/min-200bar)Variable delivery pump..... 45 gal/min-5,076 PSI (170 l/min-350 bar)Distributor control with joystick.......................................4-in-1OPTIONAL EQUIPMENTSimultaneous movements......................................................4Air ConditioningProportional control distributor Load Sensing with Flow Sharing.Air ride seatLifting piston with oil regeneration system.TIRESDIFFERENTIAL AXLESStandard (INDUSTRIAL)...............23.5-R25 x XHA Steering axles........................2, with planetary reduction gearsType of steering................................4 wheel / crab / 2 wheelFront axle.......................................................................RigidRear axle...............................................................OscillatingService brake.................................Oil bath on the four wheelsElectric parking brake.
32
RADIO REMOTE CONTROLProductivity at your fingertips
T
he optional but highly recommended Radio RemoteControl System allows an operator to control boomfunctions using a compact, wireless remote controlpendant from outside the cab or from within a personnelwork area.The remote can raise, lower, extend, rotate and retractthe boom as well as start and control the R.P.M. or stopthe engine.
33
Contractors can do more in a day with less people. Theremote operator can manoeuvre materials to differentelevations all from the elevated work area or wherethere is better visibility and slowly and precisely placethe loads. The transmitter is water and impact resistant.Controls are proportional for smooth and safe delivery.The ATP (Anti Tipping Protection) remains employedgiving you safe operation of the machine. The Radioremote control option can be added to both Dieci FixedArm and Rotational body telehandlers.
ROTATIONAL BODY MACHINES360
C
Pegasus machines start with a patentedrotating control spindle combined withunparalleled lift heights, capacities,and a wide range of attachments.Rotational units are fitted with anadvanced ATP (Anti Tipping Protection)system. ATP tells operators when they
are approaching maximum capacitylift height, boom angle, forward reach,degree of rotation, weight of load liftedand the position of the outriggers.Calculationsareperformedseamlessly so theoperator cansee at
0
040
360 CONTINUOUSROTATIONAL
a glance the load and lifting position.The Pegasus works as a full functionrotating telehandler, an access platformand a crane. This internally-developedmoment indicator is programmed tomanage the load charts of differentattachments. ATP analyzes the positionof the load in three dimensions whilesimultaneously monitoring the workconfiguration of the machine. Theprogrammed loads are comparedagainst data sent using pressuretransducers and limit switches. Whenthe telehandler reaches an overloadedposition, the system locks out any noncompliant movement automatically anda visual and audible alarm will go off.It is the wide variety of attachmentsthat make Diecis rotating telescopicPegasus so desirable. When using forks,material is lifted and placed fast whennot perfectly squared up as the Pegasuscan rotate to safely land the load.Utilizing a variety of jibs and winchesprovides the contractor with the abilityto set trusses, I-beams, panels or glass,without having to rent a crane. Thiscan be a huge time and cost savings.What the rotating telescopic handlerlacks in capacity, compared to mostcranes, it makes up for in rough terrainmobile capability. Get closer to the siteand eliminate the need for a greatercapacity.
400 ROTATIONAL
Whether your business is highway,mining, construction, steel erection, cranerental, demolition, plant maintenance,quarry or civil work, roadwork, industrialhandling or the waste industry, thePegasus saves time and money.
PEGASUS FEATURES
onsider all the features andbenefits of a rotating Pegasus. Itcan rotate 360 continuously or up to400 without having to relocate to theload pick site. Expect time saving tobe cut in half. Imagine the ability todrive down narrow rows and tightquarters, rotate the boom 90 todeliver materials on the spot. Thelow mounted boom also meansthat the telehandler can be used witha light material bucket. With the rightattachment the possibilities are endless.
34
2
3
14
8
PEGASUS CAB: NEW CAB DESIGN FOR THESE ROTATING MODELS, VARIETY OF OPTIONS AVAILABLE
107
35
11
A ROOM WITH A VIEW
9
36
8
1 Forward /Reverse Lever
T
he view is spectacular. You can see your worksite. Youcan see your work tool. And you can see whatyou are doing. The spacious cab is largely made offloor to ceiling heat-resistant glass and containedin a safe ROPS and FOPS approved curvaceousframe. After all, an unobstructed view is crucialfor operators landing loads 40 feet or morein the air. Given the amount of time thesemachines spend in transit on crowdedjobsites, the importance of all-aroundvisibility cannot be overstressed. Diecivisibility is superb due to the highmount cab, narrow profile, minimalobstructed design, low-mount boom,side-mountedengine,slopingengine hood and a patented uniquelift cylinder.
2 Dash (Fuel Gauge/EngineTachometer w/Hour Meter/Temperature Gauge)3 Assortment of Controls4 Hi/Low Range Selector Switch (2-speed drive)5 ATP (Anti-tipping Protection)6 Transverse (SWAY) Levelling Switch7 Anti-tipping Over-Ride Button8 Flow Sharing/Proportional 5-Function Joystick Control9 Stabilizer raise/lower switch bank and joystick10 Fully Adjustable Deluxe Cloth Seat (Air-Ride Optional)11 Tilt Steering Column
ROTATIONAL CAB
5
36
PEGASUS 38.16 400 DEGREE NON-CONTINUOUS ROTATION
T
he rotating telescopic Pegasus is truly a unique product and can be afast return on the investment. An economic, entry level Rotational BodyTelehandler with all the features of a Continuous Rotational Body machine,except the price. This machine features a powerful Iveco 101 hp Turbocharged Diesel engine. Its 2-speed hydrostatic, 20 mph road speed getsit around to various locations quickly. The ATP (Anti Tipping Protection)safety feature along with stabilizers all around ensures both operator
37
comfort and safety. The Pegasus 38.16 features alifting capacity of 8,400 lbs with a 52 foot reachmaking it ideal for most construction and buildingapplications. Add air conditioning and thesemachines are a delight to operate.
Pegasus 38.1652 / 8,400lbs
PEGASUS 38.16 - 400 DEGREE3'-3"7"
5'-
10'
17'-3"
3'-10"
MAX 8,400 lbs
25
15
-5
45.3 ft
35
30
25
4,400 lbs6,600 lbs
3,300 lbs
2,450 lbs
880 lbs
ft 45 40
1,850 lbs
0
0
1,300 lbs
10
5
20
15
10
10
5010
5
0
STANDARD FORK ATTACHMENTON TIRES (0 Rotation)
-5
0
ft 45 40
45.3 ft
30
25
20
15
10
10
5
10
5
0
STANDARD FORK ATTACHMENTON STABILIZERS
-5
BA
3020
20
15
0
035
C
40
15
15
550 lbs
10
20
D
20
6,400 lbs7,700 lbs
20
20
46.6 ft
E
50
25
0 A408,
5,000 lbs
0408,
60
30
B
30
GF
35
C
3,750 lbs
A
D
2,900 lbs
25
30
B
30
70
40
E
40
1,550 lbs
30
35
C
2,000 lbs
D
5045
F
50
40
E
40
50.1 ft
G
60
1,100 lbs
35
70
5045
F
50
40
50.2 ft
G
60
45
20
55
5570
50
5,500
55
MAX 5,500 lbs
4,000 lbs
MAX 8,400 lbs
6'-4"7'-10"13'-0"
2,900 lbs
9'-8"16'-0"21'-6"
7"
-7"
1,300 lbs
8'-0"4'-11"
15'-
14'
ft 45 40
35
30
25
25.6 ft
10
5
0
STANDARD FORK ATTACHMENTON TIRES (Rotating)
ECONOMIC ROTATIONAL
1'-1"
PERFORMANCEENGINEMaximum lifting capacity...........................................8,400 lbsIVECO NEF - Turbo ChargedMaximum lifting height.....................................................52 ftMaximum power.....................................101 hp at 2,200 rpmMaximum reach...............................................................45 ftType..........................................four-stroke direct injection dieselFork angle.......................................................................134Towing Force..........................................................20,232 lbfCylinders number and layout..........................4, vertical in lineBreakout Force........................................................12,814 lbfDisplacement........................................268 cu. in. (4399 cm) Maximum allowable slope.................................................40%Cooling system...............................................................liquidTotal empty weight..................................................28,820 lbsManual acceleratorMax speed (18 tire)..................................20 mph (30 km/hr)Air pre-heater for cold climatesDRIVE SYSTEMHydrostatic Transmission with variable displacement pumpTANK CAPACITYHydraulic Engine....................................Automatic AdjustmentHydraulic circuit (total)...........................71 gallons / 270 litresGear reversing...............................................Electro HydraulicFuel tank...............................................48 gallons / 180 litresInching pedal for controlled movementServo controlled 2 speed gearboxSTANDARD DEVICESCE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02HYDRAULIC CIRCUIT400 Non-Continuous Turret rotationSingle Gear pump with capacity at max speed.........30 gal/minOscillation block on rear axle.12 gal/min at end of boomHydraulic coupler on boom head.Max working pressure..............................................3,336 PSIsingle 5 Function joystickROPS-FOPS approved closed soundproof cab, with heating andProportional control distributor Load Sensing with Flow Sharingopening roof.Independent stabilizers with joystick control.DIFFERENTIAL AXLESDeluxe, suspension, cloth seat.Steering axles.........................2, with planetary reduction gearsEngine air pre-filter.Type of steering.................................4 wheel / crab / 2 wheelSelf-locking rear axle (LIMITED SLIP)Front axle..................................................................LevellingATP (Anti Tipping Protection) with block for hazardous movements.Rear axle................................................................OscillatingTIRESOPTIONAL EQUIPMENTStandard (INDUSTRIAL LUG)...............405/70x20Air ConditioningRadio ControlMan Baskets (Various Sizes)Hooks/Jibs/Winches/Truss Booms (Various Sizes)2-speed engine accelerator switchDouble joystick controls
38
Positivejib
39
SYMBOLS KEY
Negativejib
Extendablethree-sided basket
Jib(Measurements)
Centeringhandler jib
Continuousrotation
Frontposition
Stabilizersraised
Forks
Three-sidedfixed basket
Winch(Capacity)
Fork-carryingplate hook
Non-continuousrotation
Do not workon tires
Stabilizerslowered
Do not maneuverif the machineis not levelled
PEGASUS 38.16 - 400 DEGREE59.4 ft
55
41 ft660 LBS - EXTENDABLE & FIXEDROTATING MAN-BASKETS ON STABILIZERS
-5
-5
1,300
20
54.8 ft
5
0
15 FT JIB EXTENSIONON STABILIZERS
MAX 8,400 lbs5570
50
8,400 lbs
BA
6,400 lbs5,500 lbs7,700 lbs
3,300lbslbs3,6504,850lbslbs5,000
1,550lbslbs2,1002,200lbslbs2,750
660 lbslbs1,1001,100lbslbs1,650
10
5
-5
C
20
15
0
D
30
25
10
E
40
30
20
F
50
40
50.5 ft
G
60
45
0
ft 45 40
43.9 ft
35 30 25 20 15 10
5
0
FORK-CARRYING PLATE HOOKON STABILIZERS
660 lbs
880 lbs
ft 55 50 45 40 35 30 25 20 15 10
35
10
50
20
ft 45 40
44.6 ft
lbs10
5
0
035 30 25 20 15 10
5
0
5,500 LB WINCHON STABILIZERS
-5
CB
0 A408,
20
1510
D
30
25
20
15
-5
A
E
40
30
B
F
50
35
C
30
25
A
D
1,100 lbs
lbs
B
0
49.9 ft
G
60
660 lbs
C
70
50
40
E
40
30
5
8 FT JIB EXTENSIONON STABILIZERS
45
5,500 lbs
D
10
440 lbs
0 0
35
49.9 ftF
50
1,550 lbs
E
30
5
4540
F
40
10 10
51.8 ft
55G
60
1,100 lbs
60
50
4,850 lbs
49.2 ft
G
50
20
ft 55 50 45 40 35 30 25 20 15 10
(8,400 lbs)
3,300 lbs
70
50
25 30
0
MAX 8,400 lbs
70
2,200 lbs
55
35
0
4.25 FT JIB EXTENSIONON STABILIZERS
55
40
5
-5
(5,500 lbs)
(15 ft)
45
0
ft 55 50 45 40 35 30 25 20 15 10
47.9 ft
10
5
MAX 5,500 lbs
MAX 1,300 lbs
15
4,400
0
00
5
20
1510
A
6,400 lbs7,700 lbs
0-5ft 50 45 40 35 30 25 20 15 10
20
B
2,000 lbs
5
A
2,650
lbs10
10
C
4,850 lbs
5
20
15
D
30
25
2,650 lbs3,750 lbs
10
E
40
30
B
2,000 lbs
15
20
35
C
30
25
70605040302010
20
D
30
A
35
50
40
E
40
F
3,300 lbs
B
3025
35
C
49.5 ft
G
60
45
F
50
40
D
45
1,550 lbs
35
660 lbs
53
40
70
50
1,550 lbs
E
G
60
45
49.5 ft
2,200 lbs
F
45
70
50
G
0
ft 45 40
44.6 ft
35 30 25 20 15 10
5
0
8,400 LB WINCHON STABILIZERS
PEGASUS 38.16
55
50
20
(8 ft)
1,550 lbs
55
660 lbs
60
(4.25 ft)
1,100 lbs
4
MAX 2,650 lbs
MAX 4,400 lbs
65
7
7.9/13.84
1,100 lbs
MAX 660 lbs
40
PEGASUS 40.25 360 DEGREE CONTINUOUS ROTATION
I
f high reach is your concern, the Pegasus 40.25 is the unit for you.Featuring 9,000 lbs of lift capacity and a very impressive reach of81 feet, the Pegasus 40.25 is excellent at any worksite that requires manand material placement at extreme heights. The newly designed machinefeatures a powerful Perkins 144 hp Turbo After-Cooled Diesel engine.Hydraulic self levelling lift action automatically keeps the load level as the3-section boom is raised and extended, perfect for machines equipped with
41
work platforms (man baskets) ormaterial baskets.Operatorsremain comfortable all day withair conditioning and doubleproportional joysticks.
Pegasus 40.2581 / 9,000lbs
PEGASUS 40.255'-7"
3'-3"1'-2"9-11
3"20'-
MAX 9,000 lbs
MAX 7,100 lbs
-5
45
0
2010
15PEGASUS40.25
105
0
0
-6
ft 50 45 40 35 30 25 20 15 10
5
0
43 ftSTANDARD FORK ATTACHMENTON TIRES (0 Rotation)
-5
ft
-6
60 ft
9,000 lbs
20
6,600 lbs
30
4,650 lbs
35
2,900 lbs
30
40
80 ft
50
30
HGFEDCBA
55 50 45 40 35 30 25 20 15 10 5
C
25
10
10
040.25
0
STANDARD FORK ATTACHMENTON STABILIZERS (Rotating)
PEGASUS40.25
-6
ft 30
0
A
20
5PEGASUS
B
30
2015
39 ft
D
40
-5
PERFORMANCEMaximum lifting capacity.........................................9,000 lbsMaximum lifting height...................................................81ftMaximum reach............................................................61ftFork angle.................................................................120 Towing force..........................................................21,131 lbfBreakout Force......................................................12,814 lbfMaximum allowable slope..............................................40%Total empty weight.................................................38,060 lbsMax speed..................................................25mph (40km/hr)DRIVE SYSTEMHydrostatic Transmission with variable displacement pumpHydraulic engine....................................Automatic AdjustmentGear reversing...............................................Electro hydraulicInching pedal for controlled movementServo controlled 2 speed gearboxHYDRAULIC CIRCUITDouble Gear pump with capacity at max speed.......36 gal/min12 gal/min at end of boomMax working pressure............................................3,336 PSISingle 5 function joystickProportional control distributor Load Sensing with Flow SharingDIFFERENTIAL AXLESSteering axles....................2, with planetary reduction gearsType of steering..........................4 wheels / crab / 2 wheelsFront axle..............................................................LevellingRear axle...........................................................OscillatingOPTIONAL EQUIPMENTAir ConditioningRadio ControlMan Baskets (Various Sizes)Hooks/Jibs/Winches/Truss Booms (Various Sizes)Digital speedometer/odometerDouble joystick controls
55
4035
7,700 lbs
0
50
5,750 lbs
5
10
PONMLI
40
55
5,500 lbs
10
60
25
3,300 lbs
15
50
65
20
880 lbs
20
7,100 lbs
25
4,400 lbs
30
2,000 lbs
30
1,550 lbs
35
2,650 lbs
40
40
HGFEDCBA
3,750 lbs
45
70
2,200 lbs
50
60
880 lbs
55
50
70
75
1,800 lbs
60
69 ft
MLI
440 lbs
60
1,300 lbs
70
65
MAX 5,100 lbs
5,100
26'-3"
29 ft
25
20
15
10
5
0
STANDARD FORK ATTACHMENTON TIRES (Rotating)
HIGHEST ROTATIONAL
6'-4"7'-10"16'-8
3,300 lbs
5'-6"
2,200 lbs
9'-8"17'-4"
"
-7"
1,100 lbs
11'-1"7'-2"
15'-9
14'
ENGINEPERKINS 1104D ETA- Turbo After-CooledMaximum power.....................................144 hp at 2,200 rpmType..................four-stroke direct injection diesel, Common RailCylinders number and layout...........................4, vertical in lineDisplacement..........................................................268 cu. in.Cooling system...............................................................liquidElectronic acceleratorGlow plugs for cold climates
TANK CAPACITYHydraulic circuit..................................................71 gallonsFuel tank.............................................................48 gallonsSTANDARD DEVICESCE certified, ANSI/ITSDF B56.6.205, CSA Standard B354.4-02360 Continuous Turret RotationOscillation block on rear axleHydraulic coupler for possible accessories on boom headROPS-FOPS approved closed soundproof cab with heating andopening roofIndependent stabilizers with joystick controlDeluxe, suspension, cloth seat.Engine air pre-filterSelf-locking Rear axle (LIMITED SLIP)ATP (Anti-tipping Protection) with block for hazardous movementsTIRESStandard........................................445/65-22.5
Optional (INDUSTRIAL ROAD)......445/65 R 22.5
42
Positivejib
43
SYMBOLS KEY
Negativejib
Extendablethree-sided basket
Jib(Measurements)
Centeringhandler jib
Continuousrotation
Frontposition
Stabilizersraised
Forks
Three-sidedfixed basket
Winch(Capacity)
Fork-carryingplate hook
Non-continuousrotation
Do not workon tires
Stabilizerslowered
Do not maneuverif the machineis not levelled
PEGASUS 40.25MAX 660 lbs
MAX 1,750 lbs
HGFEDCBA
30
70
40.25
0
00
5045
3025
20
20
60
45
0
0
-6
ft
40
403530
30
2520
15PEGASUS40.25
10
59 ft
-5
8 FT TRUSS BOOMON STABILIZERS
50
6055
40
50
55 50 45 40 35 30 25 20 15 10 5
-5 ft -6
554540
PONMLIHGFEDCB
5040
30
35
A
3025
20
2015
10
10PEGASUS40.25
50-5
50 45 40 35 30 25 20 15 10 5
56 ft
7060
50
7,700 lbs
5,300 lbs
1,550 lbs
3,100 lbs
4,000 lbs
0
0
75
60
6,600 lbs
5
2,200 lbs
10
220 lbs
15 10
1,100 lbs
20
660 lbs
40 303525 20
0
15 FT TRUSS BOOMON STABILIZERS
65HGFEDCB
0
8,400 LB WINCHON STABILIZERS
0-6ft 60
20
10
5
0
0
70
8,400 lbs
45
30
30
40.25
5,500 lbs
65
79 ft
E
35
PEGASUS
660 lbs
70
40
F
10
220 lbs
60
PONMLI
79 ft
A
PEGASUS40.25
50 45 40 35 30 25 20 15 10 5
56 ft
G
30
20
(5,500 lbs)
7075
45
15
(8,400 lbs)
H
40
50
MAX 5,500 lbs
MAX 8,400 lbs
LI
55
25
59 ft
M
50
60
-5
-6
ft
ON
65
0
00
80 ft
P
60
70
10
5
55 50 45 40 35 30 25 20 15 10 5
75
HGFEDCBA
50
2,200 lbs
5
50
55
20
440 lbs
10
-5
65
10
1,300 lbs
15
2,650 lbs
30
880 lbs
35
1,800 lbs
40
70
HGFEDCBA
40
60
70
78 ft
PONMLI
0
5,500 LB WINCHON STABILIZERS
ft
-6
DCBA
55 50 45 40 35 30 25 20 15 10 5
59 ft
PEGASUS40.25
0
TRUSS BOOMON STABILIZERS
PEGASUS 40.25
55
70
75
9,000 lbs
50
60
MAX 9,000 lbs
(15 ft)
6,600 lbs
65
0
1,750 LBS - EXTENDABLE & FIXEDROTATING MAN-BASKET ON STABILIZERS
79 ft
PONMLI
60
70
ft 40 35 30 25 20 15 10 535
7,700 lbs
70
75
40.25
MAX 1,300 lbs
MAX 2,650 lbs(8 ft)
PEGASUS
4,650 lbs
660 LBS - EXTENDABLE & FIXEDROTATING MAN-BASKETS ON STABILIZERS
0-5
10
5,750 lbs
40 35 30 25 20 15 10 5
0-6
5,300 lbs
ft
44
5
3,100 lbs
-5
20
10
PEGASUS
2,900 lbs
10
5
30
15
20
10
40
20
30
15
706050
35
25
5040
20
3,750 lbs
60
25
44
35
32
30
50
40
4,000 lbs
35
54
45
2,200 lbs
41
40
880 lbs
47,5
45
58
50
1,550 lbs
50
HGFEDCBA
61
55
1,800 lbs
52,5
2,200 lbs
55
60
1,100 lbs
60
66
65
75 ft
NMLI
70
440 lbs
6157
O
70
1,300 lbs
64,5
72
7.9/13.84
75
1,300 lbs
67,5
65
82 ft
PONMLI
880 lbs
70
4
440 lbs
7
7.9/13.84
44
PEGASUS 50.21 360 DEGREE CONTINUOUS ROTATION
T
his is the best machine for a combination of lifting capacity and reach.Featuring a lift capacity of 11,000 lbs and a smooth reach of 67feet with a 3-section boom, this machine really performs at any jobsite.Equipped with twin front axle-mounted stabilizers, transverse (sway)levellin