DC7000 - Low Energy Swing Door Operator

A Few Applications:BanksUrgent Care FacilitiesPatient FacilitiesPatient RoomsDoctor’s OfficesRest roomsColleges & UniversitiesSchools & Libraries

Single Door Application (Dual Application Available)

Features & Benefits:• Three zone opening with independent open, check, and hold values• Adjustable open acceleration and deceleration rates• Two zone closing with built in close speed adjustment• On/off/hold open switch• Two digit display with three button interface for adjustments• Built in strike interface with dedicated relay and connector for lock• Adjustable Torque Limiting – allows faster door operation without compromising safety• Adjustable Obstruction Sensing – if obstruction is encountered during door opening, stalls temporarily, then switches to an independently adjustable seek speed to complete cycle• Selectable Close Recycle – if obstruction is encountered during door closing, recycles door open, with independently adjustable time delay. • Selectable Push To Open – automatically cycles door if a cycle is initiated manually, with independently adjustable time delay• 24VDC accessory output for powering accessories up to 0.5 ampere total load• Built in power supply• Easy installation and adjustment• Optional length header available, Standard 39”.• Available in clear or dark bronze anodized finish.• Push plate switches available. See Reverse Side For Details

888-833-7857 ext. 308 • estimating@doorcontrolservices.com

888-833-7857 ext. 308 • estimating@doorcontrolservices.com 052615ADADC