Post on 20-Jan-2018
description
Date: 23/5/14File: SSP1_A1C.1
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
案例分析、指导
Date: 23/5/14File: SSP1_A1C.2
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 4.2: 生成一个项目
Date: 23/5/14File: SSP1_A1C.3
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 4.3: 插入一个 S7 程序
Date: 23/5/14File: SSP1_A1C.4
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 4.4: 插入一个 S7 块
Date: 23/5/14File: SSP1_A1C.5
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 4.5: CPU 存储器复位
Date: 23/5/14File: SSP1_A1C.6
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 5.1: 上载并修改实际组态
Date: 23/5/14File: SSP1_A1C.7
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 5.2: 时钟存储器参数分配和测试
Date: 23/5/14File: SSP1_A1C.8
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 7.1: 选择助记符
Date: 23/5/14File: SSP1_A1C.9
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 7.2: 打开并编辑 FC 1
Date: 23/5/14File: SSP1_A1C.10
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 7.3: 改变编程语言
Date: 23/5/14File: SSP1_A1C.11
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 7.4: 保存 FC 1
Date: 23/5/14File: SSP1_A1C.12
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 7.5: 下装块到 PLC 中
Date: 23/5/14File: SSP1_A1C.13
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 7.6: 在 OB1 中调用 FC 1
Date: 23/5/14File: SSP1_A1C.14
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 7.7: 测试 FC1( 用 LAD)
Date: 23/5/14File: SSP1_A1C.15
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 7.8: 在 FC1 中扩展程序
Date: 23/5/14File: SSP1_A1C.16
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 8.1: 常开和常闭触点任务 : 在所有三个例子中当 S1 动作且 S2 不动作时指示灯亮 !
I 1.0 I 1.1 Q 4.0 I 1.0 I 1.1 Q 4.0
A I 1.0AN I 1.1= Q 4.0
Q 4.0
I 1.0
I 1.1
&
Q 4.0
I 1.0
I 1.1
&
Q 4.0
I 1.0
I 1.1
&
A I1.0A I1.1= Q 4.0
AN I 1.0A I 1.1= Q 4.0
Software
I1.0
S1
I1.1
S2
I1.0
S1
I1.1
S2
I1.0
S1
I1.1
S2
Q 4.0Programmable controller
LightLight Light
Q 4.0Programmable controller
Q 4.0Programmable controller
FDB
STL
LAD
Hardware
I 1.0 I 1.1 Q 4.0
I 1.0 I 1.1 I 1.0 I 1.1 I 1.0 I 1.1
Date: 23/5/14File: SSP1_A1C.17
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
Exercise8.3: Program for a Bottling Plant (Mode Section)
Date: 23/5/14File: SSP1_A1C.18
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 9.1: 测试定时器
T4S_PEXT
STVR
BIBCD
Q
I 0.7S5T#5s
I 0.5 Q 4.0
I 0.7
I 0.5
Q4.0
T4S_PULSE
STVR
BIBCD
Q
I 0.7S5T#5s
I 0.5 Q 4.0
I 0.7
I 0.5
Q4.05s
T4S_ODT
STVR
BIBCD
Q
I 0.7S5T#5s
I 0.5 Q 4.0
I 0.7
I 0.5
Q4.0
T4S_ODTS
STVR
BIBCD
Q
I 0.7S5T#5s
I 0.5 Q 4.0
I 0.7
I 0.5
Q4.0
I 0.7
I 0.5
Q4.0
T4S_OFFDT
STVR
BIBCD
Q
I 0.7S5T#5s
I 0.5 Q 4.0
Date: 23/5/14File: SSP1_A1C.19
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
Exercise 9.6: Program for a Bottling Plant (Filling Cycle and Bottle Count)
Date: 23/5/14File: SSP1_A1C.20
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
Exercise 9.8: Program for a Bottling Plant (Production Data)
Date: 23/5/14File: SSP1_A1C.21
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 9.9: 瓶子灌装生产线程序(包装单元的数量)
Date: 23/5/14File: SSP1_A1C.22
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 10.1: 为 FC15 建立符号表
Date: 23/5/14File: SSP1_A1C.23
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 11.1: 监视和修改变量
Date: 23/5/14File: SSP1_A1C.24
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 11.2: 在停机状态下监视和修改变量
Date: 23/5/14File: SSP1_A1C.25
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 11.3: 设置监视和修改变量工具的触发点
(Q 4.6)
在 S7 程序“ My Program” 的 OB1 中增加一段程序
Date: 23/5/14File: SSP1_A1C.26
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 11.4: 强制
Date: 23/5/14File: SSP1_A1C.27
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 11.5: 同时显示程序状态和监视变量
Date: 23/5/14File: SSP1_A1C.28
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
练习 12.2: 瓶子灌装生产线程序 - 数据存储 (1)
Date: 23/5/14File: SSP1_A1C.29
SIMATIC S7Siemens AG 2000. All rights reserved.
Information and Training CenterKnowledge for Automation
Exercise12.2: Program for a Bottling Plant (Data Storage(2))