Post on 30-Mar-2016
description
DANIEL HULLINDUSTRIAL DESIGN
email: hulld2@gmail.com
TULI HEATER
TULI HEATER
Tulipalo means heat in Finnisht
The form of the Tuli
reflects the intended use
of the object. A heater
is supposed to be warm
and friendly, hence
the gentle curves on
the sides make it look
inviting and touchable.
Overall, the Tuli heater
is used more as a piece
of movable furniture
than an appliance.
DEVELOPMENT
HEATER OPERATIONCold air is drawn in through
the bottom, heated as it
crosses over the coil and
vents out the top and into the
room.
With its flat top and
warm air rising from the unit,
the Tuli makes an excellent
heated footrest or stool.
HEATER OPERATION
Cool air intake
Heater coil
Heat pack tray
HEAT PACKS
HEAT PACKS
Heat packs are made
from naturally fire
resistant felt and are
stored within the Tuli
on the upper shelf. They
are heated as the hot air
rises around them. They
then can be taken out
and wrapped around
the colder parts of the
body.
TULI HEATER
TULI HEATER
VENA TURBINE
The Vena is a device
designed to harness
the power of streams
and rivers, and to
convert it to electrical
energy. It is portable
and designed to be
quickly installed and
removed from moving
water for instant power
generation. The flexible
fabric blades of the
propeller allow the
turbine to be rolled up
and stored for transit.
SYSTEM SETUPHere we see the system
as it would be installed.
The anchor provides
a firm grip onto the
bottom of the river. It
is based on traditional
river anchors, while
adding the feature of
being collapsible when
not in use.
TurbinePropeller
SYSTEM SETUP
Battery pack / holding case
Anchor
TURBINE
TURBINE
Inspired by kites and pinwheels, the
propellers blades can be rolled up for
transport. The generator in the front turns
the mechanical energy into electrical
energy.
BATTERY/CARRYING CASEThe case holds all the
other components
when in transit, while
also acting as electrical
storage and distribution
for the whole
system. This allows
independence from
the power grid with
an renewable energy
source.
Shoulder strap
Inverter
Power In/Out ports
Battery
Shoulder strap
Cable management
GRILLA BARBECUE
Made from laser cut sheet
metal, the Grilla is a charcoal
barbecue with an emphasis
on portability and simplicity.
Its curved body keeps it
strong while remaining
light. Portability is achieved
through the folding legs
and moveable dual purpose
handle.
GRILLA BARBECUE
DEVELOPMENT
DEVELOPMENT
PORTABILITY
When in transport mode the legs are
folded and stored inside. The lid and
bottom are locked together with the
carrying handle.
The carry handle is detached from the
front and the legs are retrieved from
inside.
The legs are unfolded and the body fits
snugly into the leg cradle. The carry
handle is latched on the top half to
become the lid handle.
LUMINAIREIN 3 BRANDS
For this project, lighting
fixtures were explored
in the style of three
distinct brands. The
focus of the project was
to ensure the brand
DNA was evident in the
designs.
DEVELOPMENT
DEVELOPMENT
BRAND SELECTION
BRAND SELECTION
Half way through the
design process one
concept was selected
for further development.
The other two concepts
are shown here.
BRAUN LIGHT DEVELOPMENT
Physical full scale
mock-ups were
developed from foam
models. Once the
preferred design was
refined, a digital CAD
model was computer
milled for a vacuum
form mold.
BRAUN LANTERN
This lantern/desklamp hybrid was
inspired by classic Braun design.
Care was taken to keep the overall
form simple and proportionally
appropriate. When sitting on its
base, the light is powered through
a wall plug while simultaneously
recharging the batteries inside.
When lifted off its charging base,
the light becomes a portable,
modern LED lantern.
Adidas soccerball house World Cup promotion 2010Melbourne, VIC, Australia
MOTHERS ART PRODUCTIONS
Bendigo flowersBendigo city council 2010
Bendigo, VIC, Australia
Through an internship program I
worked as an industrial designer for Mothers Art
Productions. Mothers Art was a company that
designed and manufactured a wide variety of
large scale, one-off items, such as public art and
corporate advertising.
PROJECTS
Davey St. Bridge conceptFrankston city council 2010 Frankston, VIC, Australia
I worked on concept
development, budget and
billing for city councils and
companies all the way through
construction drawings and
installations.
Scienceworks wayfindingScienceworks 2010
Melbourne, VIC, Australia
80615
58
738
838
663
510
750
CASEY FIELDS
80615
58
738
838
663
510
750
My experience included this project
for Casey Fields sports park. My
role was design assistant and
included site design and sculpture
drawings. I saw the project through
to construction. It was completed
in October 2010 in Casey, Victoria,
Australia.
DIGITAL SHOWCASE
Junior Product Designer - Award winning designer that creates user friendly products with a combination of beauty and sustainability. Was part of large projects featuring multi-disciplinary and cross-cultural teams. Experience in working from concept to prototype. Multi-national designs for products, public art and museum installations including India, Australia and New Zealand.
Accomplishments
Awarded Most Outstanding Industrial Designer, at the Swinburne University graduate exhibition in 2011.
Graduate of the Year Award nomination for the state of Victoria and Tasmania in 2011. Winner of Annobooks student design competition in 2010 for the Vena turbine project.
Featured in Monument magazine’s finest emerging Australian graduate work in January 2012.
Projects featured in dozens of websites.
Bachelors degree in Industrial Design with honours. Knowledge, Skills and abilities
Experienced in taking projects from concept to completion.
Prototyping through fabrication with computer assistance or by hand.
Rapid development of physical and digital models.
Computer knowledge in Adobe Photoshop, Illustrator, InDesign, Rhinoceros 3D, Solidworks, 3Ds MAX, Mental ray, V-ray, Keyshot and Z-brush.
Daniel Hull Product innovation through user experience
Team and Individual Contributions
Mothers Art Productions - specializes in Public Art, Advertising and museum installations. Mothers Art uses a combination of digital fabrication and handmade artistry. January 2010 - June 2011 Melbourne, VIC, Australia
Ten month internship through Swinburne University and afterwords a freelance designer for large projects including work for the Melbourne City Council and Adidas. Proven and welcomed contributions to multi-disciplinary teams working with art directors, designers, city councils, engineers, fabricators and contractors. I also worked to create imagery to sell projects through 3D and 2D computer programs, in addition to sketches and physical models.
ACR services - works include maintenance and installation of heating and cooling systems for many Seattle highrises and cold storage warehouses.
October 2008- January 2011 (intermittent) Bellevue, WA, USA
Temporary work while on school breaks with some remote assignments while overseas completing my degree program. Updated half century old engineering schematics to accurately reflect renovated pipe system. Worked independently while meeting time requirements.
Swinburne University of Technology - 2009- 2011Melbourne, Australia, Graduated December 2011
Bachelor of Industrial Design with honors