Post on 15-Aug-2020
CURRICULUM VITAE
PERSONAL DATA
1 FULL NAME: EGBE-NGU NTUI OGORK
2 DATE OF BIRTH: 3RD MARCH, 1964
3 PLACE OF BIRTH: EWELLE-MAMFE, CAMEROON
4 NATIONALITY: CAMEROONIAN
5 CONTACT ADDRESS: DEPT. OF CIVIL ENGINEERING
BAYERO UNIVERSITY,
PMB 3011 KANO, NIGERIA
E-MAIL:egbenguogork@yahoo.com,
enogork.civ@buk.edu.ng
TEL: 08038464283
6 MARITAL STATUS: MARRIED
7 STATE OF HEALTH: GOOD (NO DISABILITY)
8 QUALIFICATIONS: B.Sc (HONS) BUILDING TECHNOLOGY
(1989)
M.Sc (ENG) STRUCTURAL ENGINEERING (1990)
PhD CIVIL ENGINEERING (STRUCTURAL
ENGINEERING) (2015)
9 EDUCATIONAL HISTORY:
a) EDUCATIONAL INSTITUTIONS ATTENDED WITH DATES;
PRIMARY: C.B.C. SCHOOL, EWELLE-CAMEROON
(1971-1978)
SECONDARY: GOVT. HIGH SCHOOL, MAMFE-CAMEROON (1978-
1983)
C.C.A.S., KUMBA-CAMEROON (1983-1985)
TERTIARY: THE VICTORIA UNIVERSITY OF MANCHESTER,
ENGLAND (1986-1989)
THE UNIVERSITY OF LIVERPOOL, ENGLAND (1989-
1990)
BAYERO UNIVERSITY, KANO, NIGERIA (2009-2014)
b) ACADEMIC QUALIFICATIONS WITH DATES:
i FIRST SCHOOL LEAVING CERTIFICATE, 1978
ii GENERAL CERTIFICATE OF EDUCATION (GCE)
ORDINARY LEVEL, 1983
iii GENERAL CERTIFICATE OF EDUCATION (GCE) ADVANCED
LEVEL, 1985
iv B.Sc (HONS) DEGREE IN BUILDING TECHNOLOGY, 1989
v M.Sc (ENG) DEGREE IN STRUCTURAL ENGINEERING, 1990
v PhD CIVIL ENGINEERING (STRUCTURAL ENGINEERING) (2015)
10 EMPLOYMENT HISTORY:
a) Project Manager in the construction of a three storey, eight apartment block, Biyem
Assi, Yaounde, Cameroon (1991-1992)
b) Structural Engineer with Toni Astel and Associates, Zaria, Nigeria
(1993)
c) Lecturer II, Dept. of Civil Engineering, Bayero University, Kano, Nigeria (1994 –
1997)
d) Lecturer I, Dept. of Civil Engineering, Bayero University, Kano, Nigeria (1997 –
2009)
e) Senior Lecturer, Dept. of Civil Engineering, Bayero University, Kano, Nigeria
(2009 – 2015)
f) Associate Professor, Dept. of Civil Engineering, Bayero University, Kano, Nigeria
(2015 – Till Date)
g) Part time Structural Engineer with COBAG PRIME NIGERIA LTD, Kano,
Nigeria. (2002 – 2007)
11 WORKING EXPERIENCE
a) Supervision of the construction of a three storey, eight apartment block, Biyem
Assi, Yaounde, Cameroon (1991-1992)
b) Design of some medium rise buildings with Toni Astel and Associates, Zaria,
Nigeria (1993)
c) Supervision of many Under Graduate, Post Graduate Diploma and Master in Civil
Engineering projects and dissertations in structural Engineering and Civil
Engineering materials (1994 – till date)
d) Design of some residential apartment buildings, over head steel tanks and towers,
culverts, etc. in Kano and its environs with COBAG PRIME NIGERIA LTD, Kano,
Nigeria. (2002 – 2007)
12 COURSES TAUGHT
CIV 3309: STUCTURAL ANALYSIS I 1994-2002
CIV 3307: DESIGN OF STRUCTURAL ELEMENTS I 1994-1999,2006/2007
CIV 4202: STRUCTURAL ANALYSIS II 1994-2014
CIV 5306: DESIGN OF TIMBER STRUCTURES 1994-TILL DATE
CIV 5405: DESIGN OF STRUCTURAL ELEMENTS III 2007- TILL DATE
TEC 3302: COMPUTATIONAL TECHNIQUES 2005-2013
CIV 8315: ADVANCED REINFORCED CONCRETE STRUCTURES
1999-TILL DATE
CIV 8316: ADVANCED STEEL DESIGN 1999-TILL DATE
CIV 7314 (7306): REINFORCED CONCRETE DESIGN 2000- TILL DATE
CIV 7316: STRUCTURAL STEEL DESIGN 2000-2007
CIV 7308: THEORY OF STRUCTURES 2006-2007
CIV 7304: STRUCTURAL ANALYSIS I 2007-2015
CIV 7305: STRUCTURAL ANALYSIS II 2007-2015
13 RESEARCH INTEREST
Has undertaken and supervised researches in construction materials, and in structural
engineering. This include researches in locally available waste materials for use in
construction of low cost housing, reliability assessment of civil structures, and various
kinds of analytical research in structural engineering.
14 BACHELOR OF ENGINEERING (CIVIL ENGINEERING) PROJECTS SUPERVISED
1) Mohammed Hamisu Garba (1995): Effect of Partial Replacement of Cement with
Makuba on the Strength Properties of Concrete
2) Mahmoud Ahmed Mannir (1996): Properties of Laterized Makuba as a Rendering
Material
3) Nuruddeen Muhammad Musa (1997): An Assessment of the Structural use of Azara
as a Composite Beam in Low Cost Housing
4) Vincent I. Tyoager (1997): Effect of Partial Replacement of Cement with Laterite
on the Characteristic Compressive Strength of Concrete and Water Cement Ratio
Moderation
5) Nasiru Sani Inuwa (1999): Design of Reinforced Concrete Bridge over River
Tatswarki in Dawakin-Kudu Local Government Area, Kano State
6) Mu’azu Mohammed Abdullahi (1999): Design of an indoor Swimming Pool and
Recycling Plant for Water Treatment at Bayero University Sports Complex, Old
Campus
7) Sadiq Rilwan Kadara (1999): An Investigative Study of Improving the Properties
of Laterite with Rice Husk Ash in th Construction of Low Cost Building Blocks
8) Nafiu Hassan Hanga (2000): Design of a Braced Steel Tower supporting an
Elevated Water Tank proposed at Kabuga Housing Estate, Kano
9) Nuhu Mustapha (2000): Design of Pedestrial Timber Bridge at the Bush Canteen
at Mallam Aminu Kano International Airport, Kano
10) Mohammed Hadi Ibrahim (2000): Design of a Structural Steel Warehouse and Bill
of Engineering Measuremnts and Evaluation proposed for Kaduna North Local
Government.
11) Michael Onimisi Salami (2000): Design of the proposed Reinforced Concrete
Dome Mosque at Zango Dakata, Kano State
12) Nurudddeen Yusuf (2001): Analysis and Design of Reinforced Concrete Sub-
surface Water Reservoir at Sabon Gari Market, Kano
13) Jimoh Omoh Sule (2002): Design of Reinforced Concrete Swimming Pool at Sport
Arena, FCE Kano
14) Morou Adam (2003): Analysis and Design of a Reinforced Concrete Double Cell
Box Culvert on Road Niamey-Say, Niger Republic
15) Adamu Hussaini and Ahmed Saleh Hassan (2005): An Investigative Study of the
Influence of Ground Kargo Fruit on the Engineering Properties of Lateritic Soils
(A Case Study of Kano Laterites)
16) Zakari Umar Farouq and Ahmed M. Osman (2005): Design and Performance of a
Modified Septic Tank and Soak Away Sewage System
17) Nasiru Badamasi (2007): Computer Aided Design of a proposed Three Storey
Office Complex for National Union of Teachers (NUT) Kaduna
18) Isyaka Abdulkadir (2008): An Investigation into the Use of Coconut Shell as
Coarse Aggregate in Lightweight Concrete
19) Zainab Ango Murtala (2008): The Bond Strength of Rice Husk Ash Concrete
20) Muhammad Kabir Is’haq (2008): Software Development for the Analysis and
Design of Reinforced Concrete Hollow Block Slab using VISUAL BASIC 6.0
Programming language
21) Haruna Garba Pasali (2008): An Investigation into the use of Katsi as an Admixture
in Mortar
22) Abubakar Alhassan Abubakar (2008): Assessment of the Strength of
Reinforcement Bars used in Nigeria
23) Hassan Ali (2008): Design of proposed Three Storey Shopping Mall at Utako
District, Abuja
24) Abdulkadir Usman Mohammed (2010): Effect of Rice Husk Ash/ Katsi as a
Pozzolana in Mortar
25) Nasir Kabir (2010): Effect of Rice Husk Ash and Katsi as Partial Replacement of
Cement in Cement-Sand Mortar
26) Auwalu Yusuf (2010): Effect of Katsi and Rice Husk Ash as Partial Replacement
of cement in Sandcrete Blocks
27) Abdulqadir Bala Adamu (2010): Effect of Rice Husk Ash/Katsi as a Pozzolana in
Concrete
28) Salisu Abba (2010): Effect of Groundnut Shell Ash and Steel Slag on the Properties
of Mortar
29) Abdurrauf Mukhtar Gora (2011): The use of Calcium Carbide Waste as Admixture
in Mortar
30) Mustapha Nasir Said (2011): The Effect of Corn Cob Ash as Partial Replacement
of Cement in Mortar
31) Abba Lawan Isah and Murtala Sani (2012): The Effect of Sawdust Ash on the
Compressive Strength of Sandcrete Blocks
32) Hafiz Ibrahim (2012): Properties of Corn Cob Ash as Admixture in Sandcrete
Blocks
33) Muhammed Mubarak Haruna and Muhammad Lawal Abdullahi (2012): Properties
of Groundnut Shell Ash Concrete Improved with Bagasse Ash
34) Muhammad Bashir Yusuf and Mohammed Shamsudeen Usman (2012): The use of
Quary Dust as a Partial Replacement of Cement in Concrete
35) Adam Muhammad Sharu and Jibril Nuhu Jibril (2013): Experimental Study of the
Effect of Nominal Size of Coarse Aggregate on the properties of concrete
36) Muda’im Inuwa Dandago (2013): Effect of Guinea Corn Chaff Ash as Partial
Replacement of Cement in Mortar
37) Mubarak Salisu and Usman Ahmad Aliyu (2013): Properties of Laterized Concrete
with Rice Husk Ash as Pozzolana
38) Abubakar Dauda Yahaya and Ahmad Umar Turaki (2013): Properties of Laterized
Concrete with Rice Husk Ash as Pozzolana
39) Mustapha Garba Jama’a and Balarabe Yusuf Mohammed (2014): Effect of
Watermelon Waste Ash as Admixture on the Properties of Concrete
40) Bello Adavize Abel and Ikemefune Mohanye (2014): The Use of Calcium Carbide
Waste as Admixture in Sandcrete Blocks
41) Sadiq Yau (2014): Structural Steel Warehouse Design for Storage
42) Shittu Usman Chidawa (2014): Software Development for Structural Design of
Box Culvert using VISUAL BASIC
43) Luqman Yusuf and Abdullahi Abdulaziz (2014): Reliability Based Assessment of
Timber Beam in Fire
44) Lonping Tazou Olivier and Femi Tosin Lawal (2015): Effect of Aggregate Size on
Rice Husk Ash Concrete
45) Isah Salihu Adeku (2015): Effect of Partial Replacement of Natural Coarse
Aggregate with Coconut Shell Aggregate on the Tensile Strength of Concrete.
15 POSTGRADUATE DIPLOMA IN CIVIL ENGINEERING PROJECTS SUPERVISED
1) Adediran Akinade David (2001): Structural Design and Detailing of a Three Cell
Box Culvert on Karaye-Kwanyawa Road, Kano State
2) Nuhu Mohammed Otohinoyi (2002): A Comprehensive Design and Detailing of a
Two Storey Office Complex to be situated in Abuja, FCT
3) Thomas Akata Ibu (2002): Reinforced Concrete Design of Bayero University Kano
Shopping Complex
4) Aiyegoro Olalere Frank (2002): Structural Design of an Overhead Steel Tank with
supporting Steel Tower for Senior Staff Quarter, Nigeria Railway Corporation,
Nassarawa, Kano
5) Fadeyi Lawrence Olaniyi (2002): Structural Design and Detailing of a Residential
Building (Duplex) making use of Flat Slab
6) Onuigbo Callistus Chibueze (2002): Design and Analysis of a Two Storey Hostel
Building to BS 8110 (1985) at Bayero University Kano New Site
7) Apeh Ocholi Adejoh Samuel (2002): Structural Design and Detailing of a Lecture
Theatre in Reinforced Concrete to BS 8110 for Federal Polytechnic Idah
8) Isayinka Daniel Olusegun (2002): Design and Detailing of a Storey Building Office
Development
9) Bala Garba Miringa (2003): The Quality of Concrete Mixed with Turbid, Saline
and Non Turbid Water, respectively
10) Mukaila Adejare Adepoju (2003): Reinforced Concrete Design, Detailing and Bill
of Quantities of a Three Storey Training Centre for NNPC at Kaduna to BS 8110
11) Bawa Muhammad Tuga (2003): Computerized Spreadsheet Program for Design of
Simple Beams and Slabs
12) Muhammad Inuwa (2003): Computer Aided Design of One Storey Reinforced
Concrete Residential Building Estate
13) David Adamu Balami (2003): Utilization of Sawdust as Replacement of Sand in
Lightweight Concrete
14) Bilyaminu Usman Abdullbaki (2003): The Quality of Sandcrete Hollow Block for
Floor Production in Kano
15) Popoola S. Raymond (2003): Design of a Reinforced Concrete Bridge Across River
Odo-Otin, Inisa-Ikirun Way, Osun State
16) Gabriel Aderemi Adaramoye (2003): Design, Detailing and Bill of Quantities of a
Three Storey Sixteen Flats Residential Building, Staff Quarter at Federal College
of Education, Kano
17) Samson Kunle Fasein (2005): Analysis and Design of a Two Storey Office
Complex for of Engineering, Kano University of Technology, Wudil Kano State
18) Usman Mohammed Bakundi (2005): Analysis, Design and Detailing of a Ten
Storey Office Complex for Nigerian National Petroleum Corporation (NNPC)
Lagos
19) Abdulai Fatai Ajibade (2005): Structural Design and Detailing of a Two Storey
Shopping Complex on a Water Logged Soil at Garki District, Abuja
20) Abdulazeez Seidu Suleiman (2005): Design of a Cylindrical Reinforced Concrete
Surface Water Reservoir for Lokoja, Kogi State
21) Awosika Olawale (2005): Analysis and Design of a Two Storey Building for NECO
Regional Office, Kano
22) Kalli Mallam Baba (2006): Structural Design of a Three Storey Reinforced
Concrete Office Block at Sharada, Kano
23) Minkailu Mohammed Ibrahim (2006): Structural Design of Overhead Steel Water
Storage Tank for Lokogwoma Housing Estate, Ganaja Road, Lokoja, Kogi State
24) Kabiru Salisu Kiru (2006): Design of a Reinforced Concrete Bridge Across River
Kamanda in Kiru Local Government Area, Kano State
25) Alhaji Aliyu Umar (2006): Design of a Reinforced Concrete Bridge over River
Musa along Bida-Lemu Road, Niger State
26) Rabiu Abdullahi (2006): Design of Flood Control Measures for River Gagare at
(Yarkuka) Area, Isa Town
27) Yusuf Danladi Bello (2006): Design of Two Storey Building at Nigerian Law
School Campus Bagauda, Kano
28) Amamat O. Adeyemi (2006): Design of Overhead Steel Tank Tower for Kabala
West, Kaduna
29) Ijituji Olabanji Henry (2008): Analysis and Design of a Reinforced Concrete Single
Cell Box Culvert along Jikwoyi- Karshi Road, Abuja, FCT
30) Abubakar Salisu (2008): The use of Quarry Dust as a Partial Replacement of Sand
in Concrete
31) Kamaru Kareem (2008): Design of proposed Water Storage Tank on 10 m high
Tower at Bayero University Kano, New Campus
32) Ajayi Oluwarotimi Paul (2008): Design of a Football Stadium of 2000 Seating
Capacity, Bayero University Kano, New Campus
33) Auwal Abubakar Yar’adua (2008): Redesign of Reinforced Concrete Bridge across
River Dannakola along Katsina-Daura Road, Daura Local Government Area,
Katsina State
34) Ahmed Abdullahi (2008): Structural Design and Detailing of a Three Cell Box
Culvert on Garo-Godiya Road, Kabo Local Government Area, Kano State
35) Jimoh Sanusi (2008): Design of Reinforced Concrete Bridge across River Kaduna
in Rafin-Guza, Kawo Kaduna
36) Nura Usman (2008): Design of a Reinforced Concrete Bridge across River Muduru
along Katsina-Daura Road, Katsina State
37) Ikeh Josephine (2008): Characteristic Strength of Indigenous Steel Bars Produced
in Nigeria
38) Amina Ebimari Saidu (2008): Investigation on Coconut Shell as Coarse Aggregate
in Lightweight Concrete
39) Suleiman Lawal (2008): Design of a Reinforced Concrete Bridge at Makurda along
Katsina-Daura Road, Katsina State
40) Umar Olushola Wahab (2008): Design of Telecommunication Steel Tower (Mast)
Station at Gwarzo village, Kano State (A Complete Cell Site 50 m high Tower)
41) Saka Abdul Fatai (2008): Redesign of a Reinforced Concrete Bridge across River
Oyun, Offa Local Government Area, Kwara State
42) Idris Shuaibu (2008): Computer Aided Reinforced Concrete Design of Three
Storey Secondary School Building at Okene, Kogi State
43) Kabiru Rogo Usman (2010): An Investigation on the use of Stone Dust as Partial
Replacement of Laterite in Block
44) Ashhabu Elkaseem (2010): An Investigation in the use of Poliostigma Thonningi
(Kalgo) Pod Ash as an Admixture in Mortar
45) Ogunlade Musibau Oladele (2011): The Impact of Performance Bonds on
Construction Projects Successful Delivery in Nigeria (A case study of FCT and
neighbouring States)
46) Abdullahi Abubakar (2011): Effect of Dyeing Waste Water on the Quality of
Concrete
47) Igboro Kayode Olu (2011): Properties of Groundnut Husk Ash Concrete with
Ground Granulated Blast Furnace Slag as Improver
48) Owabor Iguodeyala Michaelking (2012): Performance of Crushed Palm Kernel
Shell as Partial Replacement for Sharp Sand in Sandcrete Blocks
49) Yakubu Nuhu Danja (2012): Effect of Guinea Corn Chaff Ash (GCA) as Partial
Replacement of Cement on the Properties of Concrete
50) Ogbonna Nnamdi P. (2012): Software Development for Analysis and Design of
Reinforced Concrete Beams
51) Aliyu Idris Ibrahim (2012): Software Development for the Design of Reinforced
Concrete Rectangular Solid Slab
52) Babangida Mainasara (2012): Effect of Burnt Tyre Ash on the Quality of Sandcrete
Blocks
53) Momoh Imoudu (2013): Investigation of the Properties of Recycled Asphaltic
Concrete Aggregate Concrete
54) Adebayo Sumola Elizabeth (2013): Effect of Partial Replacement of Sand with
Laterite on the Properties of Sandcrete Blocks
55) Nura Adamu (2013): Effect of Guinea Corn Chaff Ash (GCA) as Admixture on the
Properties of Concrete
56) Yakubu Ali (2014): An Investigation on the causes of cracks in the T-Block
Building, Faculty of Engineering, Bayero University Kano.
57) Gbolahan Oluwashola Samuel (2015): An Investigation into the causes of cracks in
Building: A case study of Resurrection power building Kano
58) Abdulaziz Dayyabu (2015): Reliability Based Assessment of Expansion Joints in
Reinforced Concrete Slabs under the Effect of loads and Temperature Variations.
59) Akpe-Ekanem Ekanem (2016): Properties of Concrete made with Coconut Husk
Fibre as Additives.
60) Mohammadu Iliyas (2016): Properties of Concrete made with Silica Sand.
16 MASTER IN CIVIL ENGINEERING (STRUCTURAL ENGINEERING)
DISSERTATIONS SUPERVISED
1) Muhammad Kabir Rimi (June, 2005): An Investigation into the Admixture
Properties of Kargo (Poliostigma Thonningi) Fruits Powder in Concrete.
2) Bilyaminu Usman Abdulbaki (March, 2008): Properties of Gum Arabic Mixed
Laterite.
3) Nura Mu’azu (December, 2008): Probabilistic Limit State Design Format for Hot-
Rolled Steel Beam-Column to BS 5950 (1985)
4) David Adamu Balami (November, 2008): Investigation on Rice Husk Ash Concrete
Properties.
5) Thomas Akata Ibu (November, 2008): The Effect of Curing Medium on Makuba
Concrete.
6) Hassan Othman Mohammed (December, 2008): Software Development for Design
of Timber Slab Formwork, Wall Formwork and Falsework in Accordance with BS
5268 (1991) and BS 5975 (1984).
7) Muhammed Tuga Bawa (December, 2008): Software Development for Analysis of
some Structural Elements using Finite Element Method (FEM).
8) John Wasiu (December, 2008): Reliability Based Design Format for Hollow Block
Floor.
9) Nasir Mohammed Sala Koko (November, 2008): Investigation on Katsi Residue as
Admixture in Concrete.
10) Usman Mohammed Bakundi (November, 2009): Computer Model of Beam-
Masonry Wall Interaction.
11) Jibrin Abubakar Suleiman (June, 2009): Effect of Curing Methods on Quality of
Concrete.
12) Suleiman Mohammed Laya (May, 2009): Properties of Recycled Concrete
Aggregate Concrete in Aggressive Environment.
13) Ifeolorun Monyomi Olofin (June 2009): Computer-Aided Analysis and Design of
a Simply Supported Long Span Highway Reinforced Concrete Bridge Deck/Beam
System.
14) Godwin Omofonma (March, 2010): Effects of Polypropylene Fibres on Properties
of High Strength Concrete.
15) Vincent Emhotso Michael Audu (July, 2010): Cocoa Pod Husk Ash as Admixture
in Concrete.
16) Najiyu Abubakar (August, 2010): Development of Software for the Analysis and
Design of Composite Steel Beam and Concrete Floor.
17) Muazu Bawa Samaila (August, 2010): Software Development for the Analysis,
Design and Detailing of Reinforced Concrete Slabs Based on BS 8110 (1997).
18) Araga Adamu Odovidi (July, 2010): Cassava Peel Powder as Admixture in
Concrete.
19) Modibbo Mohammed Tahir (August, 2010): Reliability Based Assessment of
Composite Steel Beam and Concrete Floor.
20) Shakir-Deen Adeshina Akinloye (August, 2010): Reliability Assessment of
Telecommunication Towers in Northen Nigeria.
21) Kudu Mohammed (August, 2010): Reliability Based Design Format of Waffle
Floor Slab to BS 8110 (1997).
22) Tsamiya Sani Ibrahim (March, 2012): Properties of Concrete made with Calcium
Carbide Waste as Admixture.
23) Isah Musa Safana (May, 2012): Reliability Based Assessment of Reinforced
Concrete Shear Wall to BS 8110 (1997).
24) Nuhu Otohinoyi Mohammed (May, 2012): An Investigation into the use of Cow
Bone Ash as Admixture in Concrete.
25) Mara Wazumtu (November, 2014): Groundnut Shell Ash as Admixture in
Concrete.
26) Solomon Ayuba (May, 2015): Properties of Concrete with Sawdust Ash as
Admixture.
27) Isyaka Abdulkadir (May, 2015): Properties of Scrap Tyre Steel Fibre Reinforced
High Performance Concrete with Rice Husk Ash.
28) Abubakar Mohammed (May, 2015): Development of a Design Program for
Reinforced Concrete Foundations using JAVA.
29) Murtala Zainab Ango (September, 2015): Reliability –Based Assessment of Timber
Footbridge Truss to Eurocode 5 (2005).
30) Abdurrazaq Kamal Nakore (September, 2015): Reliability–Based Assessment of
Timber Floor System.
31) Abdulkarim Muhammad Auwal (October, 2016): Effects of Corn Cob Ash in Self-
Compacting Concrete (SCC).
32) Haruna Daud Gussau (October, 2016): The Effect of Partial Replacement of Coarse
Aggregate with Waste Metal Bottle Caps on the Properties of Concrete
33) Aminu Maiyama Musa (June, 2017): Investigation of Ironstone Gravel as Coarse
Aggregate in Concrete
34) Rabiu Shehu Bilyaminu (June, 2017): Effect of Ironstone chippings as Substitute
for Fine Aggregate in Sandcrete Block Production
35) Nurudeen Isah Yakubu (On going): Reliability Based Evaluation of Reinforced
Concrete Bridge Columns Subjected to Dynamic Load
36) Jibrin Ishaka Jibrin (On going): Truss design optimization using Harmony Search
Method
37) Emmanuel Arubi (On going): The behavior of High Performance Polypropylene
Fibre Reinforced Cement Composite Containing Rice Husk Ash (RHA)
38) Mustapha Garba Jama’a (On going): Effect of Coconut Shell Ash as Admixture on
the Properties of Concrete
39) John Smith Abutu Simon (On going): Suitability of Date Palm Seed Ash (DPSA)
for Concrete Production
40) Usman Ahmad Aliyu (On going): Properties of Laterized Concrete using Neem
Seed Husk Ash as Admixture
41) Safiyanu Ishaq Muhammad (On going): Properties of Particle Board Produced from
Mahogany Leaves
17 PhD IN CIVIL ENGINEERING (STRUCTURAL ENGINEERING) THESIS SUPERVISED
a) Abubakar Mohammed (On going): Properties of polypropylene fibre reinforced self
compacting concrete modified with millet husk ash
18 INTERNAL EXAMINER OF MASTER IN CIVIL ENGINEERING (STRUCTURAL
ENGINEERING) DISSERTATIONS
1) Peter W. Ominijei (2003): Gum Arabic as an Admixture in Concrete.
2) Alhassan Ibrahim Marke (Sept, 2003): Strength Assessment of Colcrete
3) Taiye W.E. Adejumo (Aug, 2004): Torsional Analysis of Shear Core, Frame Tube
and Tube-in Tube Structures
4) Akilu Muhammad (Dec, 2005): Reinforced Concrete Detailing Software
Development using Autolisp.
5) Aliyu Yau Muhammad (2005): An Investigation into the Effect of Industrial Waste
Contaminated Fine Aggregate on Concrete (A case study of Rivers Challawa, Kano
and Tatsawarki Fine Aggregates)
6) Adekia Abiola (2005): Two Dimensional Modeling of Minimum Energy Loss
Culverts using Finite Elements Method
7) Mamman Mas’udu (April, 2008): Influence of Fine Aggregate Zones on the
Compressive Strength of Concrete
8) Gabriel Aderemi Adaramoye (Feb, 2009): Three Dimensional Modeling of
Minimum Energy Loss Culverts using Finite Elements Method
9) Aaron Aboshio (Feb, 2009): Dynamic Study of Communication Masts in Northern
Nigeria
10) Musa Abdul (Feb, 2009): Development of Computer Aided Design Environment
11) Mustapha Muhammad Lawan (May, 2010): Evaluation of the Effect of Type of
Water on the Compressive Strength of Concrete
12) Pam Billy Fom (May, 2010): Evaluation of the Compressive Strength of Cement-
Cow Dung Stabilized Bricks
13) Bishir Kado (2011): Probabilistic Design for steel Beam-Column Bolted End Plate
Connection
14) Ahmed Ahmed (2012): Reliability Based Assessment of steel Plate Girder Design
to BS 5950
15) Mukhtar Mustapha Jogana (2012): Computer-Aided Analysis, Design and
Detailing of Reinforced Concrete Beam to BS 110 (1997)
16) Muhammad Idris Haruna (2012): Reliability Based Assessment of Composite
Beam under fire using Euro code 4
17) Mohammed Lawan Magaji (2012): An Investigation into the effect of Temperature
variation on the compressive Strength of Concrete.
18) Ogu Caleb Ikechukwu (May, 2015): An Investigation of the Flexural Strength of
Compressed Stabilized Reinforced Earth Beam
19) Asumba Sylvia Ozulu (May, 2015): An Investigation on the Engineering Properties
of higher and Lesser Known Timber Species in Kano market.
20) Garba Suleiman (September, 2015): Properties of Millet Husk Ash-Bitumen
Stabilized Lateritic Block.
21) Barambu Abubakar Umar (June, 2016): Reliability Based Calibration of safety
factors for the Design of a Simply Supported Steel Beam based on BS 5950 (2000)
22) Naziru Muhsin Inuwa (October, 2016): Artificial Neural Network Based Model for
Analysis of Non-Prismatic Fixed End Beams and Cantilevers using Simple
Prismatic Beams
23) Hildi Gideon Shuaibu (June, 2017): Investigation on Rice Husk Ash Concrete with
Periwinkle Shell as Coarse Aggregate
24) Mohammed Sani Abdullahi (June, 2017): Reliability Analysis of Reinforced
Concrete Bridge Deck Strengthened with Carbon Fibre Reinforced Polymer
(CFRP) subject to Corrosion.
19 RESPONSIBILITIES
a) Level Coordinator 1995-2002
b) Departmental Examination Officer 1997-1999, 2003
c) Faculty Examination Officer 2004-2006
d) Departmental PGD Coordinator 2006-2012
e) Departmental PG (M.Eng/Ph.D) Coordinator 2014/2015- Till date
f) Faculty Representative to University Committee on Examination Malpractice
and Leakages 2007-2011
g) Faculty Representative to University Committee on Qualification Irregularities
2014-Till date
20 COMMUNITY SERVICE
a) Financial Secretary Cameroon Community Association Kano, Nigeria 2001
b) President Cameroon Community Association Kano, Nigeria 2002-2006
c) Patron Cameroon Community Association Kano, Nigeria 2007-Till date
d) Member of Council St Stephen Catholic Chaplaincy Bayero University Kano,
Nigeria 2011-2012
e) Adviser Justice and Peace Committee St Peter Military Chaplaincy Janguza Barrack
Kano, Nigeria 2016- Till date
21 SEMINARS
i) Egbe-Ngu Ntui Ogork (2014): Effects of Groundnut Husk Ash (GHA) in Cement
Paste and Mortar. Ph.D Seminar presented in the Department of Civil Engineering,
Bayero University Kano, 9th April, 2014
ii) Egbe-Ngu Ntui Ogork (2014): Influence of Groundnut Husk Ash (GHA) on
Concrete Properties. Ph.D Seminar presented in the Department of Civil
Engineering, Bayero University Kano, 14th May, 2014
iii) Egbe-Ngu Ntui Ogork (2014): Influence of Groundnut Husk Ash (GHA) Admixed
with Rice Husk Ash (RHA) on Concrete in Normal and Aggressive Environments.
Ph.D Seminar presented in the Department of Civil Engineering, Bayero University
Kano, 24th July, 2014
22 CONFERENCE PROCEEDINGS
i) Rufai, I.A.; Uche, O.A.U. and Ogork, E.N. (2012): Biosilica from rice husk ash as
a new engineering raw material in Nigeria. The Nigeria Society of Engineer,
National Engineering Conference Exhibition and Annual General Meeting,
“HARMONY 2012”, pp. 1-20
ii) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2014):
Multiple Regression Models for Strength Prediction of Groundnut Shell Ash
(GSA)-Rice Husk Ash (RHA) Concrete. Proceedings of the National Conference
on Bridging the Gap between Academia and Industry in Nigeria-Refocusing the
Engineering Discipline, Organized by Faculty of Engineering, Bayero University,
Kano, 9th – 11th November 2014, pp. 78-88
iii) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2015):
Characterization of Groundnut Husk Ash (GHA) Admixed with Rice Husk Ash in
Cement Paste and Concrete. Proceedings of the International Conference on Key
Engineering Materials V, Singapore, 21st – 23rd March 2015. Published in
Advanced Materials Research, vol. 1119, pp. 662-671, (2015) Trans Tech
Publications, Switzerland, www.scientific.net
iv) Abubakar Mohammed and Egbe-Ngu Ntui Ogork (2015): Development of JAVA
Application Software for Design of Concrete Foundations. Book of Proceedings of
1st Annual International Conference on ‘Science and Technology: Tools for
Achieving National Development’, Faculty of Science, Northwest University,
Kano, Nigeria, 8th – 12th November, 2015, pp. 50-55, www. Nwusciaic.com
v) Isyaka Abdulkadir and Egbe-Ngu Ntui Ogork (2015): Properties of Scrap Tyre
Steel Fibre Reinforced High Performance Concrete (STSFRHPC). Proceedings of
1st International Conference on Green Engineering for Sustainable Development
(IC-GESD2015), Faculty of Engineering, Bayero University, Kano, Nigeria, in
collaboration with the Faculty of Engineering, Tanta University, Egypt, 8th – 10th
December, 2015, pp. 49-53.
vi) Isyaka Abdulkadir and Egbe-Ngu Ntui Ogork (2015): Effects of Rice Husk Ash on
the Properties of Scrap Tyre Steel Fibre Reinforced High Performance Concrete.
Proceedings of 1st International Conference on Green Engineering for Sustainable
Development (IC-GESD2015), Faculty of Engineering, Bayero University, Kano,
Nigeria, in collaboration with the Faculty of Engineering, Tanta University, Egypt,
8th – 10th December, 2015, pp. 66-70
vii) E.N. Ogork and A.M. Auwal (2016): Mechanical Properties of Self Compacting
Concrete (SCC) made with Corn Cob Ash (CCA). Book of Proceedings of the 15th
Annual International Conference/ Nigerian Materials Congress (NIMACON 2016),
Ahmadu Bello University, Zaria, Nigeria, 21st – 25th November, 2016, pp. 379-383
viii) Aboshio A., Uche O.A.U. and Ogork E.N. (2016): Reliability Based Calibration of
Safety Factors for Reinforced Concrete Staircase Designed to BS 8110 (1997).
Proceedings of 2nd National Engineering Conference on Bridging the Gap between
Academia and Industry in Nigeria-Refocusing the Engineering Discipline- 2,
Organized by Faculty of Engineering, Bayero University, Kano, Nigeria 6th – 8th
December 2016, pp. 14-18
ix) Egbe-Ngu N. Ogork and Daud G. Haruna (2016): Mechanical Properties of
Concrete made from Waste Metal Bottle Caps as Partial Replacement for Coarse
Aggregate. Proceedings of 2nd National Engineering Conference on Bridging the
Gap between Academia and Industry in Nigeria-Refocusing the Engineering
Discipline- 2, Organized by Faculty of Engineering, Bayero University, Kano,
Nigeria 6th – 8th December 2016, pp. 290-296
23 PEER REVIEWED JOURNAL ARTICLES
1) Ogork, E.N. and Rimi, M.K. (2007): ‘Kargo’ (Poliostigma thonningi) fruits powder
as admixture in concrete. Journal of Engineering and Technology, vol. 2, No. 1, pp.
9-15, Faculty of Technology, Bayero University, Kano, Nigeria.
2) Ogork, E.N. (2008): A modified septic/soak-away system with available local
materials as filters. Journal of Engineering and Technology, vol. 3, No. 1, pp. 113-
119, Faculty of Technology, Bayero University, Kano, Nigeria.
3) Ogork, E.N. and Ibu, T.A. (2009): Properties of powdered locust bean pod
(‘Makuba’) concrete. Journal of Engineering and Technology, vol. 4, No. 2, pp. 32-
37, Faculty of Technology, Bayero University, Kano, Nigeria.
4) Gambo, A.H.; Ogork, E.N. and Aboshio, A. (2009): Wind-induced dynamic study
of communication masts in northern Nigeria. Journal of Engineering and
Technology, vol. 4, No. 2, pp. 67-78, Faculty of Technology, Bayero University,
Kano, Nigeria.
5) Aboshio, A.; Ogork, E.N. and Balami, D.A. (2009): Rice husk ash as admixture in
concrete. Journal of Engineering and Technology, vol. 4, No. 2, pp. 97-103, Faculty
of Technology, Bayero University, Kano, Nigeria.
6) Ogork, E.N. and Koko, N.M.S. (2010): ‘Katsi’ (dye residue ash) as an admixture
in concrete. Journal of Engineering and Technology, vol. 5, No. 1, pp. 81-89,
Faculty of Technology, Bayero University, Kano, Nigeria.
7) Ogork, E.N.; Aboshio, A. and Balami, D.A. (2010): Durability assessment of
concrete made with rice husk ash as admixture. Journal of Engineering and
Technology, vol. 5, No. 1, pp. 90-98, Faculty of Technology, Bayero University,
Kano, Nigeria.
8) Ogork, E.N. and Wasiu, J. (2010): Reliability-based assessment of simply
supported hollow-pot slabs. Journal of Engineering and Technology, vol. 5, No. 2,
pp. 85-94, Faculty of Technology, Bayero University, Kano, Nigeria.
9) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2014):
A study on groundnut husk ash (GHA) -concrete under acid attack, International
Journal of Modern Engineering Research (IJMER), vol. 4, Iss. 7, July 2014, pp. 30-
35, www.ijmer.com
10) Ogork, E.N.; Uche, O.A.U. and Elinwa, A.U. (2014): Strength prediction models
of groundnut husk ash (GHA) concrete, American Journal of Civil and Structural
Engineering, vol. 1, no. 4, pp. 104-110, www.sciknow.org
11) Egbe-Ngu Ntui Ogork and Okorie Austine Uche (2014): Effect of particle size of
groundnut husk ash (GHA) in cement paste and mortar, International Journal on
Recent and Innovation Trends in Computing and Communication (IJRITCC), vol.
2, Iss. 9, September 2014, pp. 2764-2769, http://www.ijritcc.org
12) Egbe-Ngu Ntui Ogork and Okorie Austine Uche (2014): Effects of groundnut husk
ash (GHA) in cement paste and mortar, International Journal of Civil Engineering
and Technology (IJCIET), vol. 5, Iss. 10, October 2014, pp. 88-95,
www.iaeme.com/Ijciet.asp
13) Egbe-Ngu Ntui Ogork and Solomon Ayuba (2014): Influence of Sawdust Ash
(SDA) as Admixture in Cement Paste and Concrete. International Journal of
Innovative Science, Engineering & Technology, vol. 1, Iss. 10, December 2014,
pp. 736-743, www.ijiset.com
14) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2014):
Performance of groundnut husk ash (GHA) - Rice husk ash (RHA) modified
concrete in acidic environment, International Journal of Engineering Research and
Application (IJERA), vol. 4, Iss. 11, November 2014, pp. 71-77, www.ijera.com
15) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa 2015):
Characterization of Groundnut Husk Ash (GHA) Admixed with Rice Husk Ash in
Cement Paste and Concrete. Advanced Materials Research, vol. 1119, pp. 662-671,
(2015) Trans Tech Publications, Switzerland, www.scientific.net
16) Mara Wazumtu and Egbe-Ngu Ntui Ogork (2015): Assessment of Groundnut Shell
Ash (GSA) as Admixture in Cement Paste and Concrete. International Journal of
Innovative Science, Engineering & Technology, vol. 2, Iss. 2, February 2015, pp.
77-86, www.ijiset.com
17) Olekwu Benjamin Elah, Gabriel Amode and Egbe-Ngu Ntui Ogork (2015):
Strength prediction models for Laterized Concrete Incorporating Used Engine Oil
as Admixture. American Journal of Civil and Structural Engineering, vol. 2, No. 2,
pp. 11-15, www.sciknow.org
18) Egbe-Ngu Ntui Ogork, Okorie Austine Uche and Augustine Uche Elinwa (2015):
Hydrochloric Acid Aggression in Groundnut Shell Ash (GSA)-Rice Husk Ash
(RHA) Modified Concrete. Scholars Journal of Engineering and Technology
(SJET), vol. 3, Iss. 2A, pp. 129-133, www.saspuplisher.com
19) Ogork, E.N. and Araga, A.O. (2015): Potentials of cassava peel powder (CPP) as
admixture in concrete. Bayero Journal of Engineering and Technology, vol. 10, No.
1, pp. 7-15, Faculty of Engineering, Bayero University, Kano, Nigeria,
www.bayerojet.com
20) Ogork, E.N. and Audu, V.E.M. (2015): Cocoa Pod Husk Ash (CPHA) Concrete in
Aggressive Environment. Bayero Journal of Engineering and Technology, vol. 10,
No. 1, pp. 35-43, Faculty of Engineering, Bayero University, Kano, Nigeria,
www.bayerojet.com
21) Egbe-Ngu Ntui Ogork and Suleiman Mohammed Laya (2015): Effect of Recycled
Concrete Aggregates on Concrete. Nigerian Journal of Engineering, vol. 22, No. 1,
pp. 26-35, Faculty of Engineering, Ahmadu Bello University, Zaria, Nigeria
22) Egbe-Ngu Ntui Ogork and Godwin Omofonma (2015): Mechanical Properties of
High Strength Polypropylene Fibre Concrete. Nigerian Journal of Engineering, vol.
22, No. 1, pp. 64-71, Faculty of Engineering, Ahmadu Bello University, Zaria,
Nigeria
23) Ogork, Egbe-Ngu Ntui and Omofonma, Godwin (2016): Durability assessment of
polypropylene high strength concrete in marine environment. Bayero Journal of
Engineering and Technology, vol. 11, No. 1, pp. 40-48, Faculty of Engineering,
Bayero University, Kano, Nigeria, www.bayerojet.com
24) E.N. Ogork and Z M. Ango (2016): Reliability Assessment of a Timber Pinned
Jointed Footbridge Truss. Nigerian Journal of Engineering, vol. 23, No. 1, pp. 35-
43, Faculty of Engineering, Ahmadu Bello University, Zaria, Nigeria
25) E.N. Ogork and A. K. Nakore (2016): Reliability Estimates of a Simply Supported
Timber Floor. Nigerian Journal of Engineering, vol. 22, No. 2, pp. 50-57, Faculty
of Engineering, Ahmadu Bello University, Zaria, Nigeria
26) E.N. Ogork and A K. Nakore (2017): Reliability Analysis of a Two Span Floor
Designed According to Eurocode 5. Nigerian Journal of Technology (NIJOTECH),
vol. 36, No. 1, pp. 18-25, Faculty of Engineering, University of Nigeria, Nsukka,
Nigeria
27) E. N. Ogork and T. S. Ibrahim (2017): Properties of Cement Paste and Concrete
Containing Calcium Carbide Waste as Additive. Nigerian Journal of Technology
(NIJOTECH), vol. 36, No. 1, pp. 26-31, Faculty of Engineering, University of
Nigeria, Nsukka, Nigeria
28) Ogork, E.N. and Suleiman, J.A. (2017): Assessment of the Effectiveness of Various
Curing Methods on the Quality of Concrete. Bayero Journal of Engineering and
Technology, vol. 12, No. 1, pp. 21-27, Faculty of Engineering, Bayero University,
Kano, Nigeria
29) Ogork, E.N. and Dayyabu, A. (2017): Safety Level Assessment of Expansion Joints
in Reinforced Concrete Slabs to Temperature Variations. Bayero Journal of
Engineering and Technology, vol. 12, No. 1, pp. 44-51, Faculty of Engineering,
Bayero University, Kano, Nigeria
30) Egbe-Ngu Ntui Ogork and Abdulkarim Muhammad Auwal (2017): Durability
Characteristics of Self-Compacting Concrete Incorporating Corn Cob Ash. CARD
International Journal of Engineering and Emerging Scientific Discovery (IJEESD),
vol. 2, No. 1, pp. 29-41, Centre for Advanced Research and Development, Rivers
State University of Science and Technology, Port Harcourt, Nigeria
31) Egbe-Ngu Ntui Ogork and Daud Gussau Haruna (2017): Durability of Waste Metal
Bottle Caps Aggregate Concrete. CARD International Journal of Engineering and
Emerging Scientific Discovery (IJEESD), vol. 2, No. 1, pp. 1-14, Centre for
Advanced Research and Development, Rivers State University of Science and
Technology, Port Harcourt, Nigeria
32) E. N. Ogork and T. S. Ibrahim (Accepted May 2017): Effects of Calcium Carbide
Waste (CCW) on the Durability of Concrete. Bayero Journal of Engineering and
Technology, Faculty of Engineering, Bayero University, Kano, Nigeria
33) E. N. Ogork and Y.N. Danja (Accepted May 2017): Evaluation of Properties of of
Cement and Concrete Containing Sorghum Chaff Ash. Bayero Journal of
Engineering and Technology, Faculty of Engineering, Bayero University, Kano,
Nigeria
24 REFEREES
1) Engr. Dr. M.O.A. Mtallib
Head, Department of Civil Engineering
Bayero University,
Kano, Nigeria
Tel: 08037019138
2) Engr. Prof. M.H. Bichi
Department of Civil Engineering
Bayero University,
Kano, Nigeria
Tel: 08036353001
3) Engr. G.A. Bichi
M.D. COBAG PRIME NIGERIA LTD
334 Aminu Kano Way, Kano, Nigeria
Tel: 064-641347