CSIS3600 Systems Analysis and Design Systems Implementation: Installation.

CSIS3600 Systems Analysis and Design

Systems Implementation:

Installation

Implementation Phase

• After maintenance and continuing support, the implementation phase of the systems development life cycle is the most resource intensive and time-consuming phase of the entire life cycle.

• It is resource intensive because so many people are involved in the process.

• Implementing a new information system into an organizational context is shaped and reshaped by the people who work in the organization.

Major Activities

Six major activities of System Implementation: – Coding– Testing– Installation– Documentation– Training– Support

Coding

• Coding is the process whereby the physical design specifications are turned into working computer code.

Coding in Teams

• A team of programmers normally works on program development.

• Using multiple programmers compresses the development schedule by allowing many portions of the system to be developed simultaneously.

• Component architectures are supported well by a team approach to programming

Issues in Using Teams

• Organization of the team

• Task assignment to specific teams or members

• Member and team communication and coordination

Team Type Characteristics Project Type

Collaborating Peers

Equal Skill Level

Overlapping specialties

Consensus-based

• Experimentation

• Creative problem solving

Chief Developer • Organized as a military platoon or squad

• One leader makes all important decisions

• Well-defined objectives

• Well-defined path to completion

Collaborative Specialist

• Wide variation in skill and experience

• Minimal overlapping technical specialties

• Leader is primarily an administrator

• Consensus–based

• Diagnosis or experimentation

• Creative and integrative problem solving

• Wide range of technology

Moving to a New System

• Transitioning to new systems involves managing change from pre-existing norms and habits.

• Change management involves:– Unfreezing -- loosening up peoples’ habits and norms– Moving -- transition from old to new systems– Refreezing -- institutionalize and make efficient the

new way of doing things

PowerPoint Presentation for Dennis, Wixom & Tegarden Systems Analysis and Design

Implementing Change

Migration Planning

• What activities will be performed when and by whom– Technical aspects

• Installing hardware and software

• Converting data

– Organizational aspects• Training users on the system

• Motivating employees to use the new system to aid in their work

Elements of a Migration Plan

Installation or Conversion

• Installation is the stage where the system is moved into production.

• It can be a very difficult stage. • There is much documentation about system

implementation failures. • Installation often means replacing an existing

system be it another computer system or a manual system

• Implementation as an organizational change process is not always successful.

Factors of Success

Factors contributing to successful implementation of a computer system– management support of the system, – involvement of the users in the development of the

system,– organizational commitment to change, – strong leadership, – system characteristics such as ease of use – users perception of how the system helps them do their

Factors for Success

• On the other hand, research has also shown that even when these factors exist, system implementations sometimes fail.

• So while these factors may help, there are no sure recipes you can follow to guarantee success.

Approaches to Conversion

The four basic approaches to installation, the one chosen will depend on: – the current organizational environment, – the scope of the project, – the complexity of the change that the

new system represents – and the organization's risk aversion.

Key Factors in Selecting a Conversion Strategy

• Risk

– Seriousness of consequences of remaining bugs

• Cost

– Parallel requires paying for two systems for a period of time

– Simultaneous requires more staff to support all locations

• Time

– Parallel, phased, and modular require more time

Conversion Styles

• Direct conversion– The new system instantly replaces the old

• Parallel conversion– For a time both old and new systems are

used. The old is abandoned when the new is proven fully capable

Conversion Location

• Pilot conversion– One or more locations are converted to work out

bugs before extending to other locations

• Phased conversion– Locations are converted in sets

• Simultaneous conversion– All locations are converted at the same time

Conversion Modules

• Whole system conversion– All modules converted in one step

• Modular conversion– When modules are loosely associated, they can

be converted one at a time

Direct Conversion

• The old system is 'turned off' and replaced by the new system, all at one time

• Sometimes called the 'cold turkey' approach • It can be very risky because the abruptness of the

change may not be well received. • On the other hand, it is usually the least costly

approach and in some cases, where the old system cannot co-exist with the new system, the only plausible approach available.

Parallel Conversion

• This is the least risky approach. • The old system is left in place and the new system

turned on. • Both systems are running alongside each other until

end users feel comfortable and confident with the new system.

• The main problem with this approach is the cost of running dual systems and ensuring the stay in sync.

• It is not usually practical with large systems.

Single Location (Pilot) Conversion

• Often referred to as the 'pilot approach.' • Rather than converting the entire organization, a

single location is selected and the current system in replaced with the new system at that location

• The key advantage is that it limits potential damage and potential cost by providing the opportunity to assess the impact of the new system.

• The primary roadblock is when data must be shared between systems as extra programs would be required to keep the data in sync.

Phased Conversion• The new system is brought on-line in functional

components; different parts of the old and new systems are used in cooperation until the whole new system is installed.

• The benefit, just like that for single location installation, is reduced exposure to risk.

• The main drawbacks are extra focus on insuring synchronization and a long period of time for complete installation.

• Not workable when the old system and new system are completely incompatible.

Simultaneous Conversion

• All sites are converted at the same time

CHANGE MANAGEMENT

Key Roles in Change Management

• The sponsor is the business person who initiated the request for the new system

• The change agent is the person(s) who lead the change effort

• The potential adopter(s) are the people who must change.

Understanding Resistance to Change

• What is good for the organization, is not necessarily good for the individuals who work there

• Cost versus benefit of transition as well as of to-be system

• Adapting to new work processes requires effort, for which there may be no additional compensation

Costs and Benefits of Change

Revising Management Policies

• No computer system will be successfully adopted unless management policies support its adoption

• Management tools for supporting adoption– Standard operating procedures (SOPs)– Measurements and rewards– Resource allocation

Motivating Adoption

• The information strategy aims to convince adopters that change is better

• The political strategy uses organizational power to motivate change

• Differentiate between ready adopters, reluctant adopters, and resistant adopters

Training

• Every new system requires new skills

• New skills may involve use of the technology itself

• New skills may be needed to handle the changed business processes

Training and User Documentation

• Training and user documentation are important factors that contribute to the success of system implementation and use.

• It is through training and user documentation that

users gain exposure to the system. System implementation plans must account for how training and user documentation will be developed and delivered to the end user.

What to Train

• Should focus on helping users accomplish their tasks

• Use cases provide an outline for common activities and a basis to plan training

Types of Training

• Use of the system

• General computer concepts

• Information system concepts

• Organizational concepts

• System management

• System installation

Methods of Training

• Tutorial – one person taught at a time• Course – several people taught at a time

(instructor lead)• Computer- aided – CBT, etc.• Interactive Training Manuals – combination of

tutorial and course• Resident Expert• Software help components• External sources – such as vendors

Project Failure

If you want to investigate examples of project failure, visit:

• http://www.scit.wlv.ac.uk/~cm1995/cbr/cbrquest.html

CSIS3600 Systems Analysis and Design Systems Implementation: Installation.

Documents

Transcript of CSIS3600 Systems Analysis and Design Systems Implementation: Installation.

MANAGING ENTERPRISE SYSTEMS POST IMPLEMENTATION …

MIS4596: Information Systems Implementation

State evaluation systems: Implementation challenges

Component, Deployment and Package Diagrams CSIS3600.

Design Strategy - Distributed Systems Part 2 New Architectures CSIS3600 Systems Analysis and Design.

Implementation and Post Implementation Student Systems at Purdue

File Systems Implementation

File Systems Topics –File –Directory –File System Implementation Reference: Chapter 5: File Systems Operating Systems Design and Implementation (Second.

Datacasting: Houston Super Bowl LI Video Systems ... · Video Systems Integration, Implementation, Deployment, and Evaluation ... LI Video Systems Integration, Implementation, Deployment,

File Systems: Design and Implementation

FPGA Implementation of Digital Systems == Practical ... · FPGA Implementation of Digital Systems – Practical ... FPGA Implementation of Digital Systems – Practical Activities

ERP Systems Implementation

File Systems Security File Systems Implementation.

Rath Communication Systems Implementation

New Approaches: RAD, Agile and eXtreme Programming CSIS3600.

Computer Studies Systems Development. Systems investigation Systems analysis Systems design Systems implementation Systems testing Systems evaluation.

Microcomputer Systems 1 Implementation Considerations.

000402824 Managing Systems Implementation Projects

“Airport Safety Management Systems Implementation”

ERP Systems Implementation Michael Lang