Post on 31-Dec-2015
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Unit 7
Hand Tools, Fasteners, and Hardware
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Hand Tools
• Essential for work in design, construction, maintenance, and repair
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Classification of Tools
- Chisels and punches- Screwdrivers- Clamps- Wrecking tools- Digging tools
- Layout tools- Saws- Boring tools- Hammers - Pliers
- Wrenches
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Layout Tools• Used to measure or mark materials• Examples
– rules– square– level– chalk line– tapes– plumb bob
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Saws
• Used to cut wood or metal• Examples
– crosscut saw– ripsaw– dovetail saw– hacksaw– coping saw– bow saw
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Boring Tools
• Used to make or change the size or shape of holes
• Examples– drill bits– power/hand drills– countersink
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Hammers
• Rely on their weight and/or speed to move another tool or object
• Examples– claw hammers– sledges – peen hammers– mallets
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Pliers
• Used to grip wood, metal, plastic, and other materials
• Examples– slip joint pliers – linesman’s pliers– locking pliers
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Wrenches
• Used to turn nuts, bolts, or screws• Examples
– wrenches– sockets– ratchets
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Chisels and Punches
• Used to cut or align materials as a result of being struck by a hammer
• Examples– cold chisel– wood chisel– center punch
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Screwdrivers
• Used to turn screws or other fasteners• Examples
– flat head screwdriver– Phillips head screwdriver– torx screwdrivers– nut drivers
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Clamps
• Used to draw and hold objects together• Examples
– C clamp– bar clamp– vise
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Wrecking Tools
• Used to take apart existing structures and materials
• Examples– pry bar– wrecking bar
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Digging Tools
• Used to turn, loosen, or remove earth• Examples
– shovel– mattock– hoe/trowel– rakes– posthole digger
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Fasteners
• Any device used to hold two or more pieces of material together or in place
• Examples– nails– screws – nuts and bolts– washers
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Nails
• Driven into the material to be held• Classified by use or form• Length measured by the “penny”• Generally made of steel or aluminum
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Types of Nails
• Common—construction• Cut—tongue-and-groove flooring• Box—light household construction• Finishing—interior finishing• Shingle—nailing wood and shingles• Roofing—rolled roofing and composition shingles• Plasterboard—attach plasterboard to studs• Hinge—fasten hinges on doors and cabinets• Duplex—construction of concrete forms or electric fencing
insulators on wooden posts• Wire staple—wire fence construction• Lead head—galvanized steel roofing and siding
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Screws
• Fastener with threads that bite into the material it fastens
• Classified according to the material to be held, the metal they are made from, the shape of the head, or the type of tool needed to turn them
• Size specified by the diameter and length of shank
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Bolts
• Fastener used with a threaded nut• Usually straight with a round, square, or
hex head• Examples
– machine bolt– cap screw– stove bolt– plow bolt– carriage bolt
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Important Terms
• Tool: instrument used in doing work• Hand tool: powered by hand• Power tool: operated by a power source other
than human power• Laminate: two or more flat pieces fastened
together with an adhesive• Adhesive: sticky substance• Diameter: distance across the center of a round
object• Shank: long stem part of a nail or screw
Copyright © 2010 Delmar, Cengage Learning. ALL RIGHTS RESERVED.
Important Terms (continued)• Head: enlarged top of a fastener• Galvanized: coated with zinc• Washer: flat disk with a hole in the center• Hardware: special fasteners• Hinge: pivots and permits a door or other object
to swing back and forth/up and down• Gussets: used to reinforce joints in wood and
metal• Flush plates: used to strengthen corners of frames
and doors