Post on 15-Jan-2017
AUTOMATED CONSTRUCTION BY CONTOUR CRAFTING AND
RELATED ROBOTICS
2
CONTENTS
• INTRODUCTION
• DRAWBACKS OF CONVENTIONAL CONSTRUCTION METHODS
• CURRENT STATUS OF AUTOMATION IN CONSTRUCTION SITES
• CONTOUR CRAFTING
• FEATURES OF CONTOUR CRAFTING
• FEATURES OF AUTOMATED CONSTRUCTION
• EXTRATERRESTRIAL APPLICATIONS
• ADVANTAGES
• CONCLUSION
• REFERENCES
3
INTRODUCTION• Current “cast-in-place” construction process has been used in
the field since Roman ages
• It still remains labour intense
• Problems in the areas of productivity, quality, safety, and
skilled labour shortages
• To address these issues, various types of automation and
robotics technologies have been proposed and implemented
• Require a paradigm shift in process technology
4
DRAWBACKS OF CONVENTIONAL CONSTRUCTION METHODS
• Slow
• Labour-intensive and inefficient
• Wasteful and emission causing
• Corruption prone
• Costly and always over budget• hazardous
source: http://blog.willis.com/2012/05
5
CURRENT STATUS OF AUTOMATION IN CONSTRUCTION SITES
• Since 18 years, construction automation and robotics have
been implemented in the United States, Japan and China
• Japanese and Chinese construction companies have their own
research centers with sophisticated equipments
• Single task robots that replace activities are mainly used
• Introducing robots at construction sites has contributed to
productivity, safety, and quality improvements
6
CONTOUR CRAFTING
• Type of 3D printing technology
• “Addictive fabrication” technology using computer control
• Building layer by layer till 3D model is completed
• Combination of extrusion and filling processes
• Uses CAD-CAM
• Able to do automated plumbing, electrical network etc..
7
CONTOUR CRAFTING (contd…)
A CC machine for fabricating concrete wall source: http://www.rapidreadytech.com
8
A CC MACHINE Source: http://4.bp.blogspot.com/-tKlPqvV83gY/T5BhWyTTOA
9
APPLICATION IN CONSTRUCTION SITES
Construction of conventional buildings using CC source: http://3dprint.com
10
APPLICATION IN CONSTRUCTION SITES (contd…)
• Robotic system is installed at the site
• Colony of houses with different designs can be constructed on
a single run
• Conventional structures can built by integrating the CC
machine
• Foundation needs to be constructed conventionally
11
APPLICATION IN CONSTRUCTION SITES (contd…)
Construction of adobe buildings using CC source: https://calearth.org
12
FEATURES OF CONTOUR CRAFTING
• Design Flexibility: allows to design structures with functional
and exotic architectural geometries
• Multiple Materials: multiple materials can be fed through CC
nozzle whose quantity can be controlled
– hence building structures containing varying amount of
different compounds in different regions is possible
13
FEATURES OF CONTOUR CRAFTING (contd…)
• Utility Conduits: utility conduits may be built into the walls of a building
structure precisely as dictated by the CAD data
Complex wall section source: http://www.truelook.com/blog/category/construction-corner/
14
FEATURES OF CONTOUR CRAFTING (contd…)
• Paint-Ready Surfaces : Regardless of the choice of materials,
the surface quality in CC is such that no further surface
preparation would be needed for painting surfaces
– Indeed an automated painting system can be integrated
• Smart Materials: elements such as strain sensors, floor and
wall heaters can be built into the structure
15
FEATURES OF AUTOMATED CONSTRUCTION
• Automated Reinforcement: robotic modular embedding of steel mesh reinforcement into each layer may be devised
• Advanced materials such as fiber reinforced mortar can be used
Automated reinforcement in CC source: http://www.truelook.com/blog/category/construction-corner/
16
FEATURES OF AUTOMATED CONSTRUCTION (contd…)
• Automated tiling: robots can be used to spread the adhesive
material and place tiles accordingly– This robotics system can be attached to the CC structure
Automated tiling source: http://www.truelook.com/blog/category/construction-corner/
17
FEATURES OF AUTOMATED CONSTRUCTION (contd…)
• Automated plumbing and electrical work: presence of conduits in
the walls makes it possible to automate plumbing and electrical
works
source: http://www.truelook.com/blog/category/construction-corner/
18
19
source:http://inhabitat.com/12000-square-china/winsun-3dprint-mansion2/
20
Buildings constructed using CC source: http://www.dailymail.co.uk/sciencetech/article-2615076
21
EXTRATERRESTRIAL APPLICATIONS
• Ability to construct support less structures
• Ability to use in-situ materials
• The lunar regolith, may be used for the construction of
landing base on the moon
22
EXTRATERRESTRIAL APPLICATIONS (contd…)
Model of construction of lunar base using contour crafting source: http://sservi.nasa.gov
23
CONSTRUCTION COSTIf Automated by CC Portion Due To
Short project length 20% - 25% Financing
No wastage of materials 25% - 30% Materials
less labour 45% - 55% Labour
24
COMPETITIVE ADVANTAGE
25
COMPETITIVE ADVANTAGE
26
ADVANTAGES
• Economical
• Environmental friendly
• Great architectural flexibility
• High speed of construction
• No wastage of materials
27
CONCLUSION
• Application in low income housing
• Emergency shelter construction
• Construction of structures with exotic architectural designs
• High speed and efficiency
• Promising new method in construction industry
28
Source: http://www.fastcodesign.com/3043245
29
Source: http://www.thenational.ae/uae/tourism/vision-for-dubais-museum-of-the-future
30
Source: http://www.thenational.ae/uae/tourism/vision-for-dubais-museum-of-the-future
31
REFERENCES1. B. Khoshnevis and G. Bekey, “Automated Construction using Contour
Crafting – Applications on Earth and Beyond,” Proceedings of the 19th International Symposium on Automation and Robotics in Construction, Gaithersburg, Maryland (2002) 489-494. 14
2. B. Khoshnevis, innovative rapid prototyping process makes large sized, smooth surfaced complex shapes in a wide variety of materials, Materials Technology, 13:2 (1998) 52-63.
3. B. Khoshnevis, R. Russell, H. Kwon, & S. Bukkapatnam, Contour Crafting – A Layered Fabrication Technique, Special Issue of IEEE Robotics and Automation Magazine, 8:3 (2001-a) 33-42.
4. B. Khoshnevis, S. Bukkapatnam, H. Kwon, H., & J. Saito, Experimental Investigation of Contour Crafting using Ceramics Materials, Rapid Prototyping J., 7:1 (2001-b) 32-41
5. C. Balaguer, M. Abderrahim, S. et.al, Future Home: An Integrated Construction Automation Approach, IEEE Robotics & Automation Magazine (2002) 55-66.
32
THANK YOU