COMPANY INTRODUCTION Macel Plin d.o.o.

Malešnica 3c,Zagreb

Tel:00385013484 451

Fax:0038513484455

macel.plin@zg.t-com.hr

OIB 36043571166

About us...

Our scope of service

•SERVICE

complete maintenance program for natural gas reduction stations and CNG

filling stations

•REPRESENTATION, INPORT AND SALES

of natural gas reduction equipment and finished stations with all annexed

material

History MACEL PLIN d.o.o.

Established in 2002 as the official representative for sales & service of natural gas reduction equipment Tartarini

During our business history, expanded product representation, sales & service of other manufacturers in connection to natural gas transport needs:

• Galli &Cassina - plug valves

• Perar - ball valves

• MDM - filters & heat exchangers

• Forain i Peco Facet - filter cartridges & separators

• Tehnofiltri - filter cartridges

• Tecnoindustria piping - piping material

Manufacturers of

CNG stations:

• Idromeccanica Srl

• Aspro Italy

• Fornovogas

• Fuel Maker

REFERENCES

DISTRIBUTERI

GPZ,Zagreb

Energo, Rijeka

Plinara Pula

Koprivnica plin d.o.o.

Konjšćina plin d.o.o

Vrbovec plin d.o.o.

Montcogim, Sv. Nedjelja

Radnik, Križevci

Energo Metan, Samobor

Humkom, Hum na Sutli and

more

Plinacro d.o.o., Zagreb-TRANSPORTER

MONTERSKE FIRME

Monter – Strojarske Montaže,Zagreb

STSI d.d., Zagreb

Montmontaža plinovodovod,Zagreb

ZM Montag d.o.o. Zagreb

Specijalna oprema d.o.o ,Lučko,Zagreb

Montmontaža NEP,ZAGREB

Montmontaža PIM,Zagreb

Elektrocentar Petek

Metalac PNT Krapina

Bimont d.o.o.,Rijeka

SCAN ;Zagreb

REFERENCES PROIZVODNE FIRME Kraš d.d., Zagreb

Pliva d.d. , Hospira Savski Marof

Ciglana, Wienerberger, Karlovac

Finag,ciglana ,Garešnica

HEP – Proizvodnja d.o.o.,Pogon EL-TO, Zagreb, Zagorska 1

HEP – Proizvodnja d.o.o., Pogon TE-TO, Zagreb, Kuševačka

HEP – Proizvodnja d.o.o., KTE Jertovec

Siemens,Zagreb

IGM ,Sladojevci

Sipro,Umag

Aluflexpack,Umag

Fasek Wiena i Zagreb

Pik Rijeka

Rockwool Adriatic,Potpićan

Gizzoni,Italy

Feromihin Novoselac

Istravino,Rijeka

TPK Oroslavlje

Berhe Zagreb

What we do

Maintenance

Annual check-up

Of reduction lines (twice a year).

Regular service of reduction equipment

For low pressure regulation every 7 years

High-pressure regulation every 3 years.

Regular service is composed of replacement of

all soft parts and parts that can deteriorate

during use.

We also provide

Setting and calibration of safety devices: safety relief valves

according to – AHH 17020- Croatian accreditation Agency,

Issuance of calibration and inspection reports and calibration lists

Filtering

Filter cartridge replacement and procurement

We also provide

Process connection of regulation equipment

Set up of equipment to requested pressure levels

Testing of equipment

Start-up of

reduction stations

For all above noted services Macel Plin has obtained

manufacturer’s authorizations and training certificates

Education of our staff All our technical support staff regulary attends training and

workshops at the manufacturer location to sharpen their skills and

learn about new product lines, providing the feed-back from the

field.

Sale of regulators, shut-off valves, safety releave valves, filters, filter

separators and heat exchanges for local distributors and transport

systems

Import & sales of natural gas

reduction equipment

Reduction stations, and all annexed equipment like insulating

joints, ball or plug valves, e.t.c.

Sales of piping material

Sale of steel piping, flanges, L-bows and T-pieces, fittings and other

meterial

Design, manufacturing and delivery of completed natural gas

reduction stations that suit your needs, with or without metering.

Offering complete solution for your natural gas

consumption needs/TYPE: MP -m3/BAR

MRS TARTARINI/MACEL PLIN

proposal,design and sizing of reduction stations

P&D diagram and bill of material (BOM) included in each proposal

Drawing of MRS

Example of typical MRS TARTARINI/MACEL PLIN

TYPE MRS MP-2-MBN-B

Two reduction lines

Turbine flow meter with bypass

Inlet pressure range: 1 to 20 bar

Outlet pressure range:0,01 to 6 barg

Flow rates up to 4000 Stm3/h

Standard MRS TARTARINI/MACEL PLIN

TYPE: MRS MP-2-MBN-B

Two reduction lines

Rotary piston flow meter with by-pass

Inlet pressure range: 0,5 to 5 bar

Outlet pressure range: 15 to 300 mbarg

Flow rates up to 900 Stm3/h

Standard MRS TARTARINI/MACEL PLIN

TYPE MRS MP-2-A-B

Single line with rotary flow meter

Inlet pressure range: 0,5 to 5 bar

Outlet pressure range:15 do 300 mbarg

Flow rates up to 900 Stm3/h

Standard MRS TARTARINI/MACEL PLIN

TYPE MRS MP-1-A

TYPE: MP/Pu=1-4 bar,Pi=200-500 mb,Q=790 m3

Standard MRS TARTARINI/MACEL PLIN

TYPE: MRS MP-2-MBN-B

fast and easy installation

foundation drawing

Standard MRS TARTARINI/MACEL PLIN

Stainless steel containers that protect

your equipment:

- standard version

- for windy enwironment

- with additional noise insulation

Standard MRS TARTARINI/MACEL PLIN

Macel Plin delivered and installed MRS /

REFERENCES

FOR THE PERIOD- 2008-2011

Commercial users / clients Capacity: 600-2000m3, BAR 1-4/100 -.500 mBAR

ISTRAVINO,RIJEKA

PIK RIJEKA,RIJEKA

MRS ALUFLEXPACK,UMAG

MRS SIPRO UMAG

MRS HOSPIRA/PLIVA,N.MAROF

Local Distributors

Capacity: CCA1000-2000 m3, BAR 4-16/1-4

FOR ENERGO RIJEKA d.o.o.

MRS MLAKA,RIJEKA

MRS KOSTRENA

MRS RIJEKA3

NATURAL GAS TRANSPORT: PLINACRO L.T.D. STANDARD CONTAINERS:.Capacity: 2X4000m3 , BAR 75-50/4-16

MRS POREČ,MRS KOVRI,MRS UMAG,MRS ROVINJ

MRS ZADAR,MRS TISNO,MRS TROGIR,MRS DRNIŠ

Thank you for your attention