Post on 05-Jun-2018
Product Specifications
P r o c e s s Te c h n o l o g i e s D i v i s i o n
Clear Edge™ Dust Collector Bags
Materials of Construction: Polyester, Polypropylene, Aramid (Nomex), Acrylic (HAN), Polyamide (P84),Teflon PS (Ryton), Cotton, Fiberglass
Optical Image of Nylon Felt with PTFE Membrane
Standard Finishes
Process Technologies Division Headquarters 11607 E. 43rd Street N Tulsa, OK 74116
918.984.6000 phone 918.437.6780 fax
info@clear-edge.com www.clear-edge.com
Finish Benefit Heat Setting Provides dimensional stability Singeing Improves cake discharge removing protruding fibers
from the surface of the bag Calendaring Improves bag efficiency and cake discharge during
backflush cycles Moisture Repellant (Hydrophobic / Oleophobic) Provides a protective barrier for the filter media
which improves cake discharge Microporous Increases bag efficiency Fluoropolymer Coating improves cake discharge and protects the
bag against moisture PTFE Membrane Expanded PTFE coating increases collection
efficiency, cake discharge and protects the filter against chemical attack.. Improves blinding resistance.
• 9 different materials of construction-wide temperature & chemical compatibility
• Ultrasonic welded seam for increased efficiency and reinforced mechanical strength
• High temperature options available (PPS, PTFE, Aramid, Polyamide)
• Custom designs to meet the unique needs of your bag house installation
• FDA compliant materials available to meet food grade applications
• Testing and analytical laboratory services available • A wide range of accessories available •
Dimensions (nominal) Diameter: 4 5/8” – 11 ¾” Length: 12” – 144” CE is capable of providing lesser and greater dimensions if necessary.
Temperature/Chemical Compatibility
Accessories
P r o c e s s Te c h n o l o g i e s D i v i s i o n
Fibre Temp Limit (ºC) Acid Alkaline Abrasion Hydrolosis
Polyester 150 (180) Good Poor Excellent Poor
Acrylic - CA 125 (135) Excellent Fair Good Excellent
Acrylic - HA 130 (140) Excellent Fair Good Excellent
Polypropylene 95 (105) Excellent Excellent Good Good
Aramid 200 (230) Fair Good Excellent Fair
Polyimide (P84) 240 (260) Good Fair Good Good
PPS 190 (210) Excellent Excellent Good Excellent
Glass 260 (300) Good Good Low Good
PTFE 260 (300) Excellent Excellent Fair Excellent
Resistance
Clear Edge™ Dust Collector Bags
This table serves only as a guide for the selection of engineering materials and filter media. Factors such as temperature, pH, concentration, exposure time, and system differential pressure can have a material effect on these recommendations. Testing in accordance with the end user’s safety guidelines is recommended. Due to the multitude of factors effecting chemical compatibility, the user is responsible for making final selection of products and materials for an application.
The information supplied is accurate to the best of our knowledge and is based upon current data. Properties quoted are typical and do not therefore constitute a specification. Customers are recommended to make their own assessment of our products under their own conditions. Clear Edge is a registered trademark. ©2015 Clear Edge Filtration
• Stainless Steel/Copper Ground Wires • V-Groove Snap Band • Super Seal Snap Band • Tuff Cuff Bottom • Carbon Steel Cages • Galvanized Cages • Stainless Steel Cages • Venturis • Quick Release Clamps • Leak Detection Powder