Post on 01-Jan-2016
description
Schematic Diagrams of Circuits: Symbols
*Copy Table 20-1 page 731
Symbol Conventions for Circuits.Schematic
map keys for electronic components.
emf The source of potential difference and electrical
energy is the circuit emf. (ie. Battery or outlet)The emf is the energy per unit charge supplied by
a source of electric current. (ie. Charge Pump)The terminal voltage is actually slightly less than
the emf. Unless otherwise stated , any reference in this book to potential difference across a battery should be thought of as the potential difference measured across the battery terminals. (ie. Potential difference across a load equals the terminal voltage.)
Resistors in Series Circuits
Resistors in SeriesPage 737 Figure 20-11
Req = R1 + R2 + R3 …
Equivalent resistance equals the total individual resistances in series
*Example 20A page 738
Resistors in Parallel Circuits
Resistors in ParallelPage 741-742 Fig. 20-14
1 = 1 + 1 + 1 Req R1 R2 R3
Equivalent resistance of resistors in parallel can be calculated
using a reciprocal relationship
* Example 20B page 743
Homework Chp. 20 Chp. 20 BK
20A 1- 4 2. a. 24Ω b. 1A c. C.1A 4. a) 11.28 Ω =Req I= .798 A
b) V= 5.79 V V= 3.22 V
• 20B 1,3,4 4. a) 2.99Ω b)36V c)2A= I 6A=I3
Chp. 20 WKBK 20A 1,2,4,5 1. 2000 kΩ 2. 4.1 x 108 Ω
4. V= 20000 V 5. R 12 =8.5 Ω
R13 = 20.5 Ω
R23 = 20 Ω
• 20B 1,4 1. Req = 1.3 Ω 4. R= .1Ω