Post on 17-Jun-2020
KEITH® WALKING FLOOR® systems are available in a wide range of profiles and thicknesses to address the vast number of
applications that are in use worldwide. A general description of uses, applications, and benefits to each system is below.
- 21 slat system
- Lighter weight
- Fast install
- Available in aluminium & UHMW
- Excellent cleanout
- Original WALKING FLOOR® slat profile
- Wide range of profile types
- Interchangeable slat designs
- Used for shredded paper, MSW,
recyclables, biofuels, light to moderate
C&D and wood forest products
- Available in thicknesses ranging
from 1/8” to 3/4” triple ridge
STANDARD ALUMINUMSTAINLESS STEEL
PRESSURE SEAL® LITE
- Heavy abrasion applications
(Steel Slat only)
- Full length bearing support
- Full length hold-down
- Leak resistant
- Aluminum V-9 Slat typically
used for MSW, recyclables, and
light C&D
- Steel V-9 Slat designed for use
in heavy C&D, scrap metal,
aggregate, and asphalt
V-9 SERIES
- Designed for high moisture loads
- Can hold 12” of standing water
- Front mount drive
- Full length bearing support
- Used for MSW, medical waste and silage
LEAKPROOF
ALUMINUMSTEEL
1/8”
1/2” IMPACT
1/2” CWSIMPACT
REVISED 3.6.18
1/8” 3/16” 7/32” 1/4” UHMW
• Ideal for abrasive loads
• Very high wear resistance
• Capable of moving pallets
• Long flooring life
CHOOSING THE RIGHT FLOOR®
3/4” CWSIMPACT
* Check with your trailer manufacturer or local dealer to make sure your trailer is compatible with forklift traffic.
3/16”HORIZONTALSEAL
- For MSW
- Leak resistant
- No floor seal
V-18 SERIES
1/2” DoubleRidge
1/2” TripleRidge
COMMON FLOORING AND COMPONENTS
STANDARD 3.5” SLATS
MOBILE APPLICATIONS
(1/8")
2185(3/16")
2188(7/32")
2190(3/8")
2199(1/2" IMPACT™)
2295
(1/2" CWS IMPACT™)
2299
(3/4" IMPACT™)
2297(3/4" CWS IMPACT™)
2301
BEARINGS
LEAK PROOF (15 SLAT)
SEAL SUBDECK
3003 BEARING
3003WEARPAD
42045SPLASH GUARD
HOLD-DOWN
2468
SPLASH GUARDHOLD-DOWN
2469
3" WIDE"T" BLOCK
47674
BENT "Y"
1212HORIZONTAL 1"x1"
STEEL
3002
1"x1"ALUMINUM
2281
HOLD-DOWN
3004
V-9 SERIES
(19/32")
2145LP BEARING
2146
2167
www.keithwalkingfloor.com©2018 KEITH Manufacturing Co. All Rights Reserved. KEITH, KEITH logo and WALKING FLOOR are registered trademarks of KEITH Manufacturing Co. Equipment manufactured by KEITH Manufacturing Co. is protected by numerous patents both domestic and foreign.
KEITH Manufacturing Co.WORLD HEADQUARTERS(800) 547-6161(541) 475-3802(541) 475-2169 faxsales@keithwalkingfloor.com
®
(STAINLESS STEEL SLAT)
2824
PRESSURE SEAL® LITE
STANDARD or HIGH TEMP.J - BEARING
2446
COMPONENTS NOT SHOWN TO SCALE
ALU
M T
RAIL
ER W
ALL
WELD DOWN
WELD DOWN WITH STEEL INSERT
3/8" FLAT TOP
ALUMINUM
5/32”1/8”
FLAT TOPSTEEL
STEE
L TR
AIL
ER W
ALL
BOLT DOWN
STEEL SIDE SEAL18
"ALUM SIDE SEAL1
4"
BOLT DOWN BOLT DOWN
2502
5/8" ALUMINUM
V-PAN (ST)STEEL INSERT
5/32”1/8"
STEEL
STANDARD J-BEARING
(3/8")
2754(7/32")
2293(3/16")
2271
HORIZONTAL SEAL
V-18 SERIESJ - BEARING
265214
" ALUM SIDE SEAL
ALU
M T
RAIL
ER W
ALL
STEE
L TR
AIL
ER W
ALL
WELD DOWN
2653
1/2" IMPACT™
2654/2675
1/2" CWS IMPACT™
2692/2693
1/2" CWS IMPACT™
2692/2693
BOLT DOWN
2669
SUB-DECK INSERT
2670
BOLT DOWN
2672
18
" ALUM or STEEL SIDE SEAL
WELD DOWN 2650