Post on 12-Feb-2022
Chapter 9: Covalent Compounds
Ears contain lots of covalent bonds, because the main elements in their
manufacture like to share valence electrons.
http://commons.wikimedia.org/wiki/File:Earcov.JPG
Chapter 9: Covalent Bonding
If you go back in time or space1 you’ll see the octet rule, which states that all elements want to gain or
lose electrons to be like the nearest noble gas. Of course, if you could go back in time, you probably
wouldn’t care much about the octet rule, because you’d have a freakin’ time machine. I’d go back to be
the king of the Neandertals, but that’s just me.
Anyway, let’s see how the octet rule is related to covalent bonding.
Section 9.1: Covalent Bonding
Think back to the last chapter. Lithium is an element that wants to lose electrons while fluorine is an
element that wants to gain electrons (because of, you guessed it, the octet rule). Lithium transfers its
valence electron to fluorine, giving lithium a positive charge and fluorine a negative charge. These
opposite charges are then attracted to one another, forming an ionic compound that lives happily ever
after.
Now, let’s fast forward from the disgusting display that is LiF to the world of other elements. Let’s talk
about two fluorine atoms. Each fluorine atom has seven valence electrons and needs one more to be like
the nearest noble gas. Neither fluorine is going to give the other fluorine an electron, so an ionic
compound clearly won’t be formed.
But what will happen? Will our fluorine atoms be stuck without being like noble gases? Will they forever
feel the sting of being just a hair’s breadth from what they want?
Nope. They’ll form a covalent molecule. Let’s investigate how this happens, in cartoon form:
1 To the periodic table chapter
Image 9.1: Lithium and fluorine after the electron
transfer has been completed. The other compounds are
always telling them to “get a room.”
http://upload.wikimedia.org/wikipedia/commons/c/ca/Kiss_Briseis_Painter_
Louvre_G278.jpg
Figure 9.2: Two fluorine atoms form an F2 molecule via a single covalent bond.
(http://commons.wikimedia.org/wiki/File:Francesco_Hayez_008.jpg)
Sounding like an Official Chemical Person:
Figure 9.3: Shared electrons
in an ionic compound are
usually shown as lines
Though I showed a covalent bond as two
electron dots between the fluorine atoms
above, the usual convention is to draw
covalent bonds as lines. Single bonds are
shown as one line, double bonds as two lines,
and triple bonds as three lines.
We can form molecules with double bonds using the same principle (Figure 9.3):
Triple bonds are also formed when two atoms have three unshared electrons, but I didn’t feel like making
another cartoon so you’ll have to just imagine it.
A Couple of Good Things to Know:
Why does fluorine form ionic compounds with lithium while it forms covalent compounds with other
nonmetals? The answer: Electronegativity.
Recall from the periodic table chapter where I mentioned that electronegativity is a measure of how
much an atom grabs electrons from other atoms it has bonded with. Well, if two elements have very
different electronegativities, this means that one wants to lose electrons and the other wants to gain
electrons. In this case, an ionic compound is formed by the transfer of electrons.
However if you have two elements with similar electronegativities, both will want to pull electrons
from the other. As a result, if they want to fulfill their octet rule destinies, they’ll have to share
electrons rather than transfer them. That’s how covalent compounds are formed.
Also, always remember that while ionic compounds form crystal lattices, covalent compounds form
molecules. This very much explains the vast difference in properties between each.
Section 9.2: Naming Covalent Compounds
Unlike ionic compounds, which are a total pain in the butt to name, covalent compounds are pretty easy.
Let’s take a look at how easy these things are.
Naming Binary Covalent Compounds:
A binary compound is one that contains only two elements. If you’ve got more than two elements, then
it’s not binary, and this section doesn’t apply to you.
Basically to name these compounds, all you have to do is name the first element, name the second
element with “-ide” at the end, and then tell people how many of each atom you have.2
For example, let’s consider the case of P2O3. The name of this compound is “diphosphorous trioxide”, or
literally “two phosphorus atoms and three oxygen atoms.” No polyatomic ions or Roman numerals to
worry about!
For those of you who aren’t familiar with the prefixes that you’re supposed to know for this, here’s a big
chart o’ awesomeness:
Number of atoms Prefix you need
1
“mono-“ (but only
for oxygen if it’s
the second atom)
2 di-
3 tri-
4 tetra-
5 penta-
6 hexa-
7 hepta-
8 octa-
9 nona-
10 deca-
2 Some notable exceptions: Water is H2O, ammonia is NH3, and methane is CH4. There are lots of others, but these
are the ones you need to know right off the bat.
How do we know what naming system to use?
If the compound starts either with a metal ion or NH4, name it like an ionic compound.
If the compound contains only nonmetals and doesn’t start with H, name it like a covalent
compound.
If the compound starts with H, name it like an acid.
Naming Acids
Acids are compounds that give off H+ ions in water. Though there are fancy exceptions to this rule, the
formulas of acids usually start with “H”3, which makes them easy to identify. To name acids, do the
following:
If it doesn’t contain oxygen, the name of the acid is “hydro[something]ic acid.” For example, HF
is “hydrofluoric acid”, HCN is “hydrocyanic acid”, H2Se is “hydroselenic acid” and so forth.
If the acid contains oxygen, it’s named “[something][suffix] acid.” Because polyatomic ions are
what give these acids their oxygen, we need to know the names of these ions. If the name of the
ion ends with “-ate”, the suffix is “-ic” and if the name of the ion ends with “-ite”, the suffix is “-
ous.” Thus, H2SO3, which contains the sulfite ion, is called “sulfurous acid.” H3PO4, which
contains the phosphate ion, is named “phosphoric acid.”
3 You may have noticed that H2O starts with an H. As we’ll see later in the book, water can behave as an acid… or
a base. In any case, we always call it water, never oxilic acid or something crazy like that.
Figure 9.4: A bottle of hydrochloric acid on vacation in
Brazil. According to Wikipedia, “a lot” of hydrochloric
acid is used for “industrial stuff” every year.
http://commons.wikimedia.org/wiki/File:Acido_cloridrico.jpg
Those Wacky Elements!
Figure 9.5: Some of the elements have unusual formulas.
The halogens and hydrogen are all diatomic, so they have
the formula X2 (for example, chlorine is Cl2 and bromine
is Br2). Additionally, phosphorus has the formula P4 and
sulfur is S8.
http://commons.wikimedia.org/wiki/File:Sulfur-es67a.jpg
Section 9.3: Lewis Structures
Because covalent compounds do a lot of cool chemistry, and this chemistry is largely dependent on the
structures of these compounds, it’s important that we know how to find these structures. Though there
are a ton of different types of structures that you can draw for a compound, the one we will find most
useful is the Lewis structure.4
Anyhow, here’s how to draw a Lewis structure. We’ll use NH3 as our example.
Determine the number of valence electrons that are present in the compound. In NH3, we
have a total of eight valence electrons – five for nitrogen and one for each of the three hydrogen
atoms.5
Determine the number of “octet electrons” in the molecule – in our case, it’s 14 octet
electrons. How do we know this? Use the following information:
o Hydrogen has two octet electrons.
o Beryllium has four octet electrons.
o Boron has six octet electrons (or, if it’s in a polyatomic ion, eight octet electrons).
o All other elements have eight octet electrons.
Determine the number of bonding electrons in the compound. This is done by subtracting the
number of valence electrons from the number of octet electrons. In our example, this is 14-8 = 6
bonding electrons.
4 Organic chemists and biochemists have a lot of different ways to draw structural formulas; the particular type of
structure depends on the thing they’re studying at the time. 5 In case you’ve forgotten how to find valence electrons, it’s the number of s- and p-electrons since the last noble
gas. For example, calcium has two valence electrons, boron has three, and oxygen has six.
Great Men Named Lewis
Figure 9.6: Lewis Hamilton (1985-current) was the 2008
Formula One World Champion. Though he’s a great driver
on the track, his license was suspended for a month after he
was caught driving 122 miles an hour.
http://commons.wikimedia.org/wiki/File:Hamilton_2011_British_GP.jpg
Determine the number of bonds in the compound. This is done by dividing the number above
by two. In our example, 6/2 = 3 bonds.
Draw the compound. Because we love having rules for how to do stuff like this, use the
following guidelines:6
a. Hydrogen and the halogens always bond once.
b. Oxygen’s family and beryllium bond twice (unless it’s a polyatomic ion, in which case
they may bond once or twice).
c. Nitrogen’s family and boron bond three times (unless it’s a polyatomic ion, in which case
they may bond three or four times.
d. Carbon’s family bonds four times.
Add dots to represent “lone pair” or “unbonded pair” electrons. These are electrons which
aren’t involved in bonding, but are present on an atom so that it might have a full octet of valence
electrons. Basically, this is done by just adding pairs of dots representing electrons until each
element has the number of octet electrons we determined they needed earlier. In our example, we
find that hydrogen needs no electrons (it wants only two octet electrons and there are two in each
bond) and nitrogen needs a pair of electrons because it only has six octet electrons and wants
eight). You can see this in the diagram below:
For polyatomic ions, you need to figure out where the charged atoms are. To do this,
determine how many electrons each of them has around it (two per lone pair, one for each bond)
6 There are exceptions to these rules, but they’re pretty uncommon. We’ll just pretend they don’t exist, if that’s OK
with you.
Figure 9.7: As you can see, the three bonds that we said we
needed earlier are shown in this structure. Even better, we
followed the rules above, with nitrogen having three bonds and
each hydrogen bonded once.
Figure 9.8: Nitrogen wants a lone pair of electrons so it has a
total of eight octet electrons (two from each bond for a total of
six and two from the lone pair). The hydrogen atoms don’t
need lone pairs because they have their desired two electrons.
and compare that to the number of valence electrons each wants. If the number of electrons
around the atom is greater than the number of valence electrons, the atom is negatively charged.
If it’s less, then it’s positively charged. You can check this out in the example of the hydroxide
ion, OH-:
Resonance Structures
Sometimes it’s difficult to figure out where to put all of the bonds in a Lewis structure. In some cases this
is because you just don’t know what you’re doing, but in other cases you may look at a structure and say
to yourself “hey, this bond could go in several different places.” If this bond is a double bond, you may
be looking at the dreaded resonance structure.
Basically, resonance structures are a set of different Lewis structures, each of which show one of the ways
that the molecule can be arranged. When you combine all of these resonance structures, you get a real
idea of how the electrons in a molecule are actually arranged. Let’s check this out by using the example
of the nitrite ion, NO2-1
. Because it’s no fun to go through the math ugly step-by-step like we did above,
I’ll use the magic of embedded figures in the text to do that for me.
To avoid the problem of having to pick one N-O bond over the other, draw two Lewis structures: One
will correspond to the double bond being between one N-O bond and the other will correspond to the
double bond being between the other N-O bond. These are your resonance structures for the nitrite ion:7
7 As mentioned above, the actual structure of the nitrite ion is somewhere between the two, with 1 ½ bonds between
the nitrogen and –½ charge on each oxygen atom. Don’t worry about this too much – it probably won’t come up.
Figure 9.9: The hydroxide ion. The oxygen atom has the
negative charge, because it has 7 valence electrons
surrounding it (three lone pairs and one bond) whereas
neutral oxygen has six.
Figure 9.10: Your math should show that you need to have three
bonds. The problem: You can put the double bond between the
nitrogen and either oxygen. What does this mean? Both answers are
right, and you’ve got a bad case of resonance structures.
Figure 9.11: The two
resonance structures
for the nitrite ion.
Ain’t they cute?
Expanded Octets:
Every so often, we run into a chemical compound with a Lewis structure that can’t be solved using the
method above. That’s most likely because the central atom has an “expanded octet”, meaning that it has
more than eight valence electrons on it. This is caused because d-orbitals get involved in the bonding fun,
making following the octet rule a more annoying experience.
Here’s how you handle this sort of thing. Let’s use the example of XeF2:
Determine the number of valence electrons in the compound. In this case, xenon has 8 and
fluorine has 7 each (14 for both). The total valence electrons in the compound is 22.
Draw the molecule so that the central atom (usually the first thing in the formula) is bonded
once to each of the other atoms. In this case, Xenon will be bonded once to each of the fluorine
atoms:
Surround each of the outer atoms with pairs of electrons until they each have eight
electrons.
Add the remaining electrons to the central atom in pairs until you run out. Remember, the
remaining electrons will be equal to the total valence electrons minus two electrons for each bond
and lone pair:
Section 9.4: VSEPR Theory8
Believe it or not, chemists often find it useful to determine the shape of a molecule. This may seem like a
waste of time, but it turns out that if we know the structure of a compound, we can usually figure out its
properties and how it reacts when it meets other molecules.
8 Pronounced “vesper”.
Figure 9.12: What XeF2 looks like
denuded of valence electrons.
Figure 9.13: XeF2 after fluorine puts on
pants, so to speak.
Figure 9.14: The magical wonder that is
xenon difluoride.
The theoretical underpinning for determining the shape of a molecule is something known as VSEPR
theory, where VSEPR stands for “Valence Shell Electron Pair Repulsion.” Though this sounds like one
of those terms that chemists used to make themselves look smarter, it’s actually kind of a useful term.
The part that says “valence shell electron pair” refers to the fact that we’re dealing with the outer electron
pairs on an atom – in other words, the lone pairs and bonds that are stuck to the atom. The “repulsion”
part refers to the fact that electrons repel one another. When you put it all together, VSEPR theory tells
us that the shapes of molecules are determined by how the outer electrons repel one another and try to
move away from each other as much as possible.
For example, let’s consider the example of CO2. Depending on how we feel like drawing this molecule,
we might come up with one of the following structures:
VSEPR tells us that only one of these drawings is correct. In the one of the left, we can see that the
electrons in each C=O bond have retreated as far away from each other as possible, while in the drawing
on the right we can see that the C=O bonds are at a 90 degree angle from one another. Because the
electrons in each bond repel each other, the drawing on the left represents the actual structure of CO2.
Let’s go to another example of this to see what’s going on. Using one of the resonance structures of the
nitrite ion, we can see that VSEPR is followed:
Figure 9.15: Benedictine monks celebrating vespers in
Morristown, NJ.
Figure 9.16: Two
technically-correct Lewis
structures of carbon dioxide
Figure 9.17: The structure of the nitrite ion reflects the fact that
the three sets of electrons on the nitrogen atom (one lone pair,
one single bond, and one double bond) repel one another. This
is why they’re shown as being 1200 angles apart from one
another.
So, how do we find the shape and bond angle for various chemical compounds? I’m glad you asked! Use
the flowchart below to figure out what the bond angle and shape of your molecule of choice is:
Figure 9.18: A great big flow chart that tells you how to find bond angles and molecular shapes, VSEPR
style. Note that molecules with expanded octets aren’t included in this chart, because they’re really not
something you need to worry about much for a first-year chemistry class.
You’ll notice that when you compare the bond angles of CH4 with the bond angle of NH3, the angle
changes to be two degrees smaller in NH3. The reason for this is that the lone pair of electrons is a little
more out and about, shoving the other atoms closer together than normal. This is why H2O also has a
bond angle that’s three degrees smaller than NH3- it’s got another lone pair to jam those H-O bonds
together a little harder.
Spotlight On Something You’ll Never Need to Know In Real Life
Bonding in covalent molecules takes place in something called “hybrid orbitals”, which are just
regular s- and p-orbitals that have mixed together to form orbitals with properties somewhere in the
middle. Using Figure 9.18, anything with four things on the central atom is sp3 hybridized, anything
with three things on the central atom are sp2-hybridized, anything with two things on it is sp-hybridized,
and hydrogen just uses unhybridized s-orbitals.
Section 9.5: Polarity
Recall, if you will, the magical time when we discussed electronegativity.9 Assuming your memory is
good, you’ll recall that electronegativity is a measure of how much an atom tries to grab electrons from
other atoms it is bonded with. According to the octet rule10
, elements on the left side of the periodic table
(metals) have low electronegativities while those on the right (nonmetals) have high electronegativities.
Because nonmetals and metals have very dissimilar electronegativities, there is a transfer of electrons to
form an ionic compound. Because two nonmetals will have similar electronegativities, there’s a sharing
of electrons to form a covalent compound.11
But what happens when two nonmetals have similar, but not identical electronegativities. The more
electronegative atom will pull harder on the electrons than the less electronegative atom, causing an
imbalance in the distribution of electrons. This, in turn, leads to a partial negative charge on the more
electronegative atom because it has more than its share of electrons, and a partial negative charge on the
less electronegative atom because some of its share of electrons has been pulled away from it. This
situation is shown below in the case of an S-F bond.
In figure 9.19, there are a couple of things you should be aware of:
That funny arrow thing indicates the presence of a dipole. A dipole is what we call it when
there’s more negative charge in one place than another. In this case, the arrow points toward
fluorine because fluorine is pulling the electrons in the S-F bond toward it using the power of its
electronegativity.
That andstuff indicates the partial positive charge on the sulfur atom and the partial
negative charge on the fluorine atom.
Whenever we have a covalent bond between two atoms with dissimilar polarities, it’s referred to as a
polar covalent bond.
9 Specifically, during the magical chapter about the periodic table.
10 Which says that all elements want to gain or lose electrons to be like the nearest noble gas.
11 For those of you with bad memories, I talk about this very thing toward the beginning of this chapter, after the
cartoons.
Figure 9.19: I’m about to explain the
stuff on this figure in the text. Just
take a moment to enjoy my amazing
Microsoft Paint skills.
Did You Know?
If there’s an electronegativity difference between the two atoms in a bond, the bond will have some
degree of polarity. If this difference is greater than about 1.8 Pauling units, we usually think of it
as being an electrostatic attraction rather than a bond (i.e. ionic rather than covalent).
Molecular Polarity
So, we’ve talked about bonds being polar. Given that electrons can be unevenly distributed in a bond, can
they also be unevenly distributed in a molecule?
Of course they can! Do you really think I’d write a section about this topic if it was impossible? Get a
clue, buster.
Anyhow, a polar covalent molecule is any molecule where the electrons are unevenly distributed. This
occurs in any asymmetric molecule. How can you tell if something is symmetric? Just draw the Lewis
structure and look at the central atom – if any of the “things” stuck to it are different than each other, the
molecule is polar.
Let’s take a look at one famously polar molecule: water. If we draw the structure of water, we can see
that it looks like this:
As you can see, oxygen has four things stuck to it: Two lone pairs of electrons and two hydrogen atoms.
Because a lone pair of electrons is different from a hydrogen atom, this is a polar molecule. Likewise, if
we look at carbon dioxide (Figure 9.22):
Great Men Named Lewis
Figure 9.20: Lewis the cat is the first cat known to
have been put under house arrest, after previously
having had a restraining order put on him by animal
control officers in Connecticut. This picture is an
artist’s conception of what it would look like if Lewis
the cat fought a monkey.
http://commons.wikimedia.org/wiki/File:The_Monkey_and_the_Cat_by_Abr
aham_Hondius.jpg
Figure 9.21: Water, the wettest of the polar molecules.
We see that it’s totally symmetric around carbon (i.e. the two “things” that are stuck to it are both oxygen
atoms), so it’s a nonpolar molecule.
Section 9.6: The Properties of Covalent Compounds
Just as the properties of ionic compounds are determined by the fact that cations and anions are all
jammed together in one big stable block, the properties of covalent compounds are determined by the fact
that these compounds exist as molecules that more or less ignore one another.12
To imagine this in more concrete terms, let’s think about ionic compounds as being like big locked
chunks of Legu blocks13
(Figure 9.23) In such an arrangement, the blocks are going to be hard to pull
apart, which accounts for the hardness, brittleness, and high melting and boiling points of ionic
compounds.
12
The forces that hold them together are called “intermolecular forces”, but we won’t worry about that right now. 13
I use the term “Legu” because of a trademark dispute with another maker of toy blocks whom we won’t name.
Figure 9.22: Carbon dioxide.
Chemistry Fun(ish) Fact
A covalent molecule can be nonpolar even while having polar covalent bonds. Use the example of
carbon dioxide above – though the C=O bond is polar (oxygen is more electronegative than carbon),
the symmetry of the molecule makes it nonpolar overall.
A good rule of thumb (though not one that you see very often) is this: Molecules with lots of lone pairs
on the central atom are generally more polar than those with fewer lone pairs. For example, water
(which has two lone pairs on the oxygen) is more polar than ammonia (which has only one lone pair on
the nitrogen atom).
Figure 9.23: Legu blocks, all stuck together. It looks like they’re
making a house, or maybe a castle. I wish I had some Legu blocks
right now.
http://upload.wikimedia.org/wikipedia/commons/2/2e/LEGO-02.jpg
On the other hand, let’s think about covalent compounds as being like a great big sack of sticky ping-
pong balls.14
In this case, we would expect the following properties:
Covalent compounds have lower melting and boiling points than ionic compounds (often below
room temperature). This is because it doesn’t take much energy to pull these ping-pong ball
molecules apart from one another.
Covalent compounds tend to be less hard and brittle than ionic compounds. This is because those
ping-pong ball-molecules can shift around when hit with an external force.15
Covalent compounds are more likely to burn than ionic compounds. The reasoning is simple:
Carbon and hydrogen have nearly identical electronegativities, so they form a vast number of
covalent compounds with one another.16
Since carbon and hydrogen are required for a compound
to burn, we would expect for covalent compounds to be more likely to burn than ionic
compounds (Figure 9.24).
Covalent compounds don’t tend to conduct electricity. Electricity is conducted through the
movement of charges (either ions or electrons), and in a covalent compound there are no ions
present and electrons have no way to move around. This is why covalent compounds are almost
uniformly insulators off electricity.17
14
We’re saying that they’re sticky to account for the weak intermolecular forces that attract covalent molecules to
one another, as mentioned in footnote 12. 15
This isn’t to say that covalent compounds are objectively soft or squishy. For example, if I were to hit you in the
head with a big block of ice, you wouldn’t think of it as particularly soft, even though it isn’t quite as hard as you
would expect from an ionic compound. 16
These are called “organic compounds.” 17
Yes, even water, which is a covalent compound, isn’t a good conductor of electricity. So why will you fry when
you put the radio in the bathtub with you? It’s because the water in the bathtub contains dissolved ionic compounds,
which allow electricity to travel through water.
Figure 9.24: This flaming car contains
covalent compounds in the seats, gas
tank, and tire. In case you were worried,
the driver got out, so he’s not part of the
flaming debris seen here.
http://commons.wikimedia.org/wiki/File:Lightmatter_car
bq.jpg