Post on 31-Mar-2021
CERNIERE PER STRUTTURE METALLICHEHinges for metal structures
SECONDA EDIZIONE • 2020Second edition • 2020
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
176
SERIE 001 • Series 001 Cerniere esterne in lamiera grezza da 12/10 con alette in asse Ø6 x 25mmExternal hinges in 12/10 rough steel sheet with center Ø6 pivot and mm25 winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 001 001/6
L 18 –
B – 18
PACK 2000 2000
OPTIONALBugne per puntatura Welding Bosses
OPTIONALBugne per puntatura Welding Bosses
25
L
1,2
15
B
2
6ø
Art. 001Item 001
Art. 001/6Item 001/6
SERIE 089 • Series 089 Cerniere esterne in lamiera grezza da 12/10 con alette fuori asse Ø6 x 25mm External hinges in 12/10 rough steel sheet with offset Ø6 pivot and mm25 winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 089 091 090 092
L 19 19 – –
B – – 19 19
PACK 2000 2000 2000 2000
Art. 089Item 089
Art. 090Item 090
Art. 091Item 091
Art. 092Item 092
25
L L
1,2
15
Ø 6
25
B
Ø 6
B
2
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
177
SERIE 049 • Series 049 Cerniere esterne in lamiera grezza da 12/10 con alette in asse Ø 6,6 x 25mmExternal hinges in 12/10 rough steel sheet with center Ø6,6 pivot and mm25 winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 049 049/66
L 18 –
B – 18
PACK 2000 2000
Art. 049Item 049
Art. 049/66Item 049/66
25
L
1,2
15
B
3
Ø 6,6
OPTIONALBugne per puntaturaWelding Bosses
OPTIONALBugne per puntatura Welding Bosses
SERIE 047 • Series 047 Cerniere esterne in lamiera grezza da 12/10 con alette fuori asse Ø 6,6 x 25mm External hinges in 12/10 rough steel sheet with offset Ø6,6 pivot and mm25 winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 047 066 048 067
L 22 22 – –
B – – 22 22
PACK 2000 2000 2000 2000
Art. 048Item 048
Art. 047Item 047
Art. 067Item 067
Art. 066Item 066
25
L L
1,2
15
Ø 6,6
25
B
Ø 6,6
B
3
3
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
178
ARTICOLO Item 086 086/25 006 006/25 087 087/25 088 088/25
L 18 25 18 25 – – – –
B – – – – 18 25 18 25
PACK 1000 1000 1000 1000 1000 1000 1000 1000
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
30
18
L
1,5
9øB
3
OPTIONALBugne per puntatura Welding Bosses
OPTIONALBugne per puntatura Welding Bosses
30
L
B B
L
1,5
30
1,5
Ø 9
Ø9
18
30
L
B B
L
1,5
30
1,5
Ø 9
Ø9
18
SERIE 152 • Series 152 Cerniere esterne in lamiera grezza e acciaio inox da 15/10 con alette in asse Ø 9 x 30mmExternal hinges in 15/10 rough steel sheet or S/S sheet with center Ø9 pivot and mm30 winglets
Cerniere da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 152 152/9 156 156/9
L 18 – 18 –
B – 18 – 18
FINITURA Finishing
LamieraRough sheet
LamieraRough sheet
InoxS/S sheet
InoxS/S sheet
PACK 1000 1000 1000 1000
Art. 152 e 156Item 152 e 156
Art. 152/9 e 156/9Item 152/9 and 156/9
SERIE 006 • Series 006 Cerniere esterne in lamiera grezza da 15/10 con alette fuori asse Ø 9 x 30mm External hinges in 15/10 rough steel sheet with offset Ø9 pivot and mm30 winglets
Art. 086 e 086/25Item 086 and 086/25
Art. 087 e 087/25Item 087 and 087/25
Art. 006 e 006/25Item 006 and 006/25
Art. 088 e 088/25Item 088 and 088/25
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
179
SERIE 151 • Series 151
SERIE 563 • Series 563
Cerniere esterne in lamiera grezza da 15/10 con alette in asse Ø 9 x 30mm forateExternal hinges in 15/10 rough steel sheet with center Ø 9 pivot and mm30 holed winglets
Cerniere esterne in lamiera grezza da 15/10 con alette fuori asse Ø 9 x 30mm forateExternal hinges in 15/10 rough steel sheet with offset Ø 9 pivot and mm30 holed winglets
Cerniere in lamiera grezza da applicare tramite viti o rivetti alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by screws or rivets to the structure of the cabinet. 180° opening.
Cerniere in lamiera grezza da applicare tramite viti o rivetti alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by screws or rivets to the structure of the cabinet. 180° opening.
ARTICOLO Item 151 151/9
L 18 –
B – 18
PACK 1000 1000
ARTICOLO Item 564 563 564/9 563/9
L 18 18 – –
B – – 18 18
PACK 1000 1000 1000 1000
30 16
18
1,5
11
L5ø
ø
ø
30
3
5
9
11
16
B
Art. 151Item 151
Art. 564Item 564
Art. 564/9Item 564/9
Art. 563Item 563
Art. 563/9Item 563/9
Art. 151/9Item 151/9
L L B BØ 9
16
11
16115ø
30
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
180
SERIE 005 • Series 005
SERIE 002 • Series 002
Cerniere esterne in lamiera grezza da 15/10 con alette fuori asse Ø 9 x 30mm External hinges in 15/10 rough steel sheet with offset Ø 9 pivot and mm30 winglets
Cerniere esterne in lamiera grezza da 15/10 con aletta sagomata Ø 9 x 30mmExternal hinges in 15/10 rough steel sheet with Ø9 pivot and 30mm shaped winglet
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
Cerniere in lamiera grezza da applicare tramite puntatura sulla fiancata del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 004 005 004/9 005/9
L 31 31 – –
B – – 31 31
PACK 2000 2000 2000 2000OPTIONALBugne per puntatura Welding Bosses
1,5
1,8
B 9ø
30
3
1,8 1,5
30Ø 9
18
L
Art. 004/9 Item 004/9
Art. 004Item 004
Art. 005Item 005
Art. 002Item 002
3
30
18
1,5
Ø 9
18
10
8,5
Art. 199Item 199
Art. 005/9 Item 005/9
ARTICOLO Item 002 199
PACK 1000 1000
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
181
SERIE 010 • Series 010
SERIE 281 • Series 281
Cerniere esterne in lamiera grezza da 15/10 con alette sagomate fuori asse Ø 9 x 30mmExternal hinges in 15/10 rough steel sheet with offset Ø9 pivot and 30mm shaped winglets
Cerniere esterne in lamiera grezza da 15/10 con alette in asse Ø 10 x 35mmExternal hinges in 15/10 rough steel sheet with center Ø 10 pivot and mm35 winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 010 011 010/9 011/9
L 19 19 – –
B – – 19 19
PACK 1000 1000 1000 1000
ARTICOLO Item 283 281 283/10 281/10
L 21 49 – –
B – – 21 49
PACK 500 500 500 500
OPTIONALBugne per puntatura Welding Bosses
B B9ø
8
30
3
Art. 011/9 Item 011/9
Art. 281 e 283 Item 281 and 283
Art. 011Item 011
Art. 010/9 Item 010/9
Art. 281/10 e 283/10 Item 281/10 and 283/10
Art. 010Item 010
L L
1,5
8
30
18
3
BL
35
22
4
1,5
1ø 0
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
182
OPTIONALBugne per puntaturaWelding Bosses
SERIE 094 • Series 094 Cerniere esterne in lamiera grezza da 15/10 con alette fuori asse Ø 10 x 35mmExternal hinges in 15/10 rough steel sheet with offset Ø10 pivot and mm 35 winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 094 095 097 096
L 27 27 – –
B – – 27 27
PACK 500 500 500 500
B
35
1ø0 B
4
Art. 094Item 094
Art. 097Item 097
Art. 095Item 095
Art. 096Item 096
35
Ø 10
22
1,5
4
L L
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
183
21Ø 10 1,
5
12
13
35
224
SERIE 280 • Series 280 Cerniere esterne in lamiera grezza da 15/10 con alette sagomate fuori asse Ø 10 x 35mmExternal hinges in 15/10 rough steel sheet with offset Ø 10 pivot and mm35 shaped winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 280 282
PACK 500 500
25,5
35
10 9
1,5
4
Ø
SERIE 068 • Series 068 Cerniere esterne in lamiera grezza da 15/10 con alette sagomate fuori asse Ø 10 x 35mmExternal hinges in 15/10 rough steel sheet with offset Ø 10 pivot and mm35 shaped winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 068 069 068/10 069/10
PACK 500 500 500 500
Art. 068/10Item 068/10
Art. 068Item 068
Art. 069/10Item 069/10
Art. 069Item 069
Art. 282Item 282
Art. 280Item 280
9
Ø 10
16,5 21,5
35
422
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
184
SERIE 561 • Series 561 Cerniere esterne in lamiera grezza da 15/10 con alette sagomate fuori asse Ø 10 x 35mmExternal hinges in 15/10 rough steel sheet with offset Ø10 pivot and mm35 shaped winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 561 562
PACK 500 500
SERIE 008 • Series 008 Cerniere esterne in lamiera grezza da 15/10 con alette in asse Ø 10 x 50mmExternal hinges in 15/10 rough steel sheet with center Ø10 pivot and mm50 winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 008 130 009 130/10
L 25 28 – –
B – – 25 28
PACK 500 500 500 500
OPTIONALBugne per puntatura Welding Bosses
3
7
35
224
14
1,5
1817,5
Ø 10
Ø
Art. 561Item 561
Art. 008 e 130Item 008 and 130
Art. 562Item 562
Art. 009 e 130/10Item 009 and 130/10
314
50
Ø 10
L
4
B
1,5
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
185
35
Ø 14
16
29
33
60°
35
37
39
SERIE 404 • Series 404 Cerniere esterne in lamiera grezza da 20/10 con alette sagomate fuori asse Ø 14 x 35mmExternal hinges in 20/10 rough steel sheet with offset Ø14 pivot and mm35 shaped winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 404/1 404/2 405 405/1
PACK 500 500 500 500
OPTIONALBugne per puntatura Welding Bosses
SERIE 128 • Series 128 Cerniere esterne in lamiera grezza da 15/10 con alette fuori asse Ø 10 x 50mmExternal hinges in 15/10 rough steel sheet with offset Ø10 pivot and mm50 winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura a 180°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. 180° opening.
ARTICOLO Item 128 129 128/10 129/10
L 31 31 – –
B – – 31 31
PACK 500 500 500 500
1,5
L L50
314
2,2
10
Ø 14
28
2
28
3539
Ø
50
4
1,5
2,2
1ø0
B B
Art. 128Item 128
Art. 404/1Item 404/1
Art. 405Item 405
Art. 405/1Item 405/1
Art. 128/10Item 128/10
Art. 129Item 129
Art. 404/2Item 404/2
Art. 129/10Item 129/10
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
186
ARTICOLO Item 109 110/08 111/08 112/08 110/10 111/10 112/10
SPESSORE MAXLAMIERA DI APPLICAZIONE
Max steel sheet thick0,6 0,7/0,8 0,7/0,8 0,7/0,8 1,0/1,5 1,0/1,5 1,0/1,5
H 28,5 32 32 32 32 32 32
PACK 1000 1000 1000 1000 1000 1000 1000
Cerniere da applicare ad innesto sulla porta oppure direttamente sulla struttura del mobile.Il perno di rotazione è realizzato in acciaio ad alta velocità (AVP) con finitura zincata.Interlocking hinges to be applied on the door or directly on the structure of the cabinet.Rotation pivot is made of high machinability Steel (AVP) with galvanized finishing.
SERIE 110 • Series 110 Cerniere Esterne ad innesto in PA6 • PA6 interlocking external hinges
FINITURAFinishing
NeroBlack09004
Grigio chiaroLight grey07035
Grigio scuroDark grey07040
ArgentoSilver09006
Standard Altri disponibili/Other available
Ø 6
9
H
2
16
16
12
12
6,00
max
3,00
min
2
Asola d’incastro Housing slot
Art. 110Cerniera con molla
Item 110Hinge with spring
Art. 111Cerniera con perno fisso
Item 110Hinge with fixed pin
Art. 112Cerniera sfilabile con molla
Item 112Take-off hinge with spring
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
187
SERIE 018 • Series 018 Cerniere esterne in lamiera grezza da 15/10 con alette fuori asse Ø 7 x 60mm External hinges in 15/10 rough steel sheet with offset Ø7 pivot and mm60 winglets
Cerniere in lamiera grezza da applicare alla struttura del mobile tramite puntatura nella versione grezza o tramite viti nella versione zincata. Apertura a 180°.Hinges in rough steel sheet to be applied to the structure of the cabinet by spot-welding in the raw version or through screws in the galvanized version. 180° opening.
ARTICOLO Item 018 018/00001
FINITURA Finishing
Lamiera grezzaRough sheet
Lamiera zincataGalvanized sheet
PACK 500 50060
5,220
33
13
42
40 20
Ø
Ø
7
1,5
Femmina da applicare ad innesto sul fianco del mobile, maschio da fissare tramite viti sull’anta del mobile. Apertura circa 80°Interlocking female to be inserted on the side of the cabinet, maleto be screwed on the cabinet door. Opening approx. 80 °
SERIE 569 • Series 569 Cerniere interne in PA6 • PA6 internal hinges
ARTICOLO Item 569 570
PACK 500 500
16
19,6
4
55,5
30
17
10,3
18
14
14
0,8
20
4,5
30
6
4
M. 4
10,2
30
21
75
15
20
36
16
19,6
44ø
Art. 569Item 569
Art. 570Item 570
Art. 569Item 569
FINITURAFinishing
NeroBlack09004
Grigio chiaroLight grey07035
Grigio scuroDark grey07040
Standard Altri disponibili/Other available
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
188
SERIE 540 • Series 540 Cerniere interne in lamiera grezza da 15/10 con alette Ø9 x 30mmInternal hinges in 15/10 rough steel sheet with Ø9 pivot and mm30 winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura circa 75°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. Opening approx. 75 °.
ARTICOLO Item 540 540/1 554 554/1 540/40 554/51
L 48 48 45 45 – –
B – – – – 40 51
PACK 1000 1000 1000 1000 1000 1000
30
1,5
Ø 9
B
24
12,5
L 4,4
8,8
1,5
30
18
9
3
Ø
60
14
2030
75°
Asola su fiancataSlot on the side
Art. 540 e 554Item 540 and 554
Art. 540/1 e 554/1Item 540/1 and 554/1
Art. 540/40 e 554/51Item 540/40 and 554/51
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
189
SERIE 025 • Series 025 Cerniere interne in lamiera grezza da 12/10 con alette Ø6,6 x 25mmInternal hinges in 12/10 rough steel sheet with Ø6,6 pivot and mm25 winglets
Cerniere in lamiera grezza da applicare tramite puntatura alla struttura del mobile. Apertura circa 130°.Hinges in rough steel sheet to be applied by spot-welding to the structure of the cabinet. Opening approx. 130 °.
ARTICOLO Item 025 026 027 028
PACK 1000 1000 1000 1000
Art. 027Item 027
Art. 025Item 025
Art. 028Item 028
Art. 026Item 026
25
36,3
15,3 1,
2
65°
162,
5
1428
16
9,2
Ø 6,6
1,2
25
19,1
18
1,2
25
Ø 6,6
12,7 14,7
21
18
130°
48
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
190
Cerniera in lamiera grezza da applicare tramite puntatura alla fiancata del mobile.Hinge in rough steel sheet to be applied by spot-welding to the side of the cabinet.
ARTICOLO Item 381
PACK 500
ARTICOLO 381 • Item 381 Cerniera interna maschio in lamiera grezza da 10/10 • Internal male hinge in 10/10 rough steel sheet
ARTICOLO Item 240
PACK 500
ARTICOLO 240 • Item 240 Cerniera interna femmina in lamiera zincata da 20/10 • Internal female hinge in 20/10 galvanized steel sheet
Cerniera in lamiera zincata da applicare tramite viti alla porta del mobile.Da accoppiare all’art.381, precedentemente applicato tramite puntatura alla fiancata del mobile. Apertura circa 90°.Hinge in galvanized steel sheet to be screwed on the cabinet door.To be coupled with item 381, previously applied by spot-welding on the side of the cabinet. Opening approx.90°.
18
7,4
16
16
5ø,9
86
30,841
,8
90°
28
3
302
35
23Ø 10
12,5
6,5
22,6
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
191
3
10 100°
20
3015
10°Ø
Ø
6
20
2
11
45°5,3
2432
ARTICOLO Item 543
PACK 500
ARTICOLO 543 • Item 543 Cerniera interna femmina in lamiera zincata da 20/10 • Internal female hinge in 20/10 galvanized steel sheet
Cerniera in lamiera zincata da applicare tramite viti alla porta del mobile.Da accoppiare all’art. 010 e 011, precedentemente applicato tramite puntatura alla fiancata del mobile.Apertura circa 75°.Hinge in galvanized steel sheet to be screwed on the cabinet door.To be coupled with item 010 and 011, previously applied by spot-welding on the side of the cabinet.Opening approx.75°.
ARTICOLO Item 098
PACK 500
ARTICOLO 098 • Item 098 Cerniera interna femmina in lamiera zincata da 20/10 • Internal female hinge in 20/10 galvanized steel sheet
Cerniera in lamiera zincata da applicare tramite viti alla porta del mobile.Da accoppiare all’art.381, precedentemente applicato tramite puntatura alla fiancata del mobile.Apertura circa 85°.Hinge in galvanized steel sheet to be screwed on the cabinet door.To be coupled with item 381, previously applied by spot-welding on the side of the cabinet. Opening approx.85°.
Art. 011Item 011
Art. 381Item 381
4
15
95°
25
2
19
24
27,5
1669
39
15,5
1030
30
20
39
Ø 6
Asola da 12,5 e 6,5mm12,5 and 6,5mm slot
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
192
ARTICOLO Item 406
PACK 500
ARTICOLO 406 • Item 406 Cerniere interna femmina in lamiera zincata da 20/10 • Internal female hinge in 20/10 galvanized steel sheet
Cerniera in lamiera zincata da applicare tramite viti alla porta del mobile.Da accoppiare all’art.381, precedentemente applicato tramite puntatura alla fiancata del mobile. Apertura circa 85°.Hinge in galvanized steel sheet to be screwed on the cabinet door.To be coupled with item 381, previously applied by spot-welding on the side of the cabinet. Opening approx.85°.
ARTICOLO Item 546
PACK 500
ARTICOLO 546 • Item 546 Cerniera interna femmina in lamiera zincata da 20/10 • Internal female hinge in 20/10 galvanized steel sheet
Cerniera in lamiera zincata da applicare tramite viti alla porta del mobile.Da accoppiare all’art.381, precedentemente applicato tramite puntatura alla fiancata del mobile. Apertura circa 85°Hinge in galvanized steel sheet to be screwed on the cabinet door.To be coupled with item 381, previously applied by spot-welding on the side of the cabinet. Opening approx.85°.
2
23,5
41,6
66 16
26
22
Ø 6
15
3610 20
30
25 3
895
°
Art. 381Item 381
Art. 381Item 381
Asola da 12,5 e 6,5mm12,5 and 6,5mm slot
Asola da 12,5 e 6,5mm12,5 and 6,5mm slot
25 4
2295
°
30
212
28
28
1673
47
Ø 6
2010 43
15
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
193
Art. 381Item 381
Art. 381Item 381
Asola da 12,5 e 6,5mm12,5 and 6,5mm slot
ARTICOLO Item 106
PACK 500
ARTICOLO 106 • Item 106 Cerniera interna femmina in lamiera zincata da 25/10 • Internal female hinge in 25/10 galvanized steel sheet
Cerniera in lamiera zincata da applicare tramite viti alla porta del mobile.Da accoppiare all’art.381, precedentemente applicato tramite puntatura alla fiancata del mobile. Apertura circa 85°.Hinge in galvanized steel sheet to be screwed on the cabinet door.To be coupled with item 381, previously applied by spot-welding on the side of the cabinet. Opening approx.85°.
ARTICOLO Item 275
PACK 500
ARTICOLO 275 • Item 275 Cerniera interna femmina in lamiera zincata da 25/10 • Internal female hinge in 25/10 galvanized steel sheet
Cerniera in lamiera zincata da applicare tramite viti alla porta del mobile.Da accoppiare all’art.381, precedentemente applicato tramite puntatura alla fiancata del mobile. Apertura circa 85°.Hinge in galvanized steel sheet to be screwed on the cabinet door.To be coupled with item 381, previously applied by spot-welding on the side of the cabinet. Opening approx.85°.
30 3
9
95°
2,5
37
42
73,5 21
40
55
30
8 20 45,5
15,5
Ø 6
Asola da 8x5mm8x5 mm slot
2,5
17,5
72 2246
36,5
38
Ø 6
15 30
20 4210
32 3
2285
°
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
194
ARTICOLO Item 265
PACK 500
ARTICOLO 265 • Item 265 Cerniera interna femmina in lamiera zincata da 20/10 • Internal female hinge in 20/10 galvanized steel sheet
Cerniera in lamiera zincata da applicare tramite viti alla porta del mobile.Da accoppiare all’art.381, precedentemente applicato tramite puntatura alla fiancata del mobile. Apertura circa 85°Hinge in galvanized steel sheet to be screwed on the cabinet door.To be coupled with item 381, previously applied by spot-welding on the side of the cabinet. Opening approx.85°
ARTICOLO Item 429
PACK 2000
ARTICOLO 429 • Item 429 Cerniera esterna maschio ad innesto in ferro zincato con esagono da 10mmGalvanized steel external, clutching, male hinge with mm10 hexagon
Cerniera da inserire sulla parte superiore e inferiore della porta e fissare tramite dado da M.5. Predisporre foro da Ø 6 sulla parte superiore ed inferiore del mobile.Hinge to be inserted on the top as well as on the bottom of the door and to be fastened with an M5 nut. Prepare a Ø 6 hole on the top as well as on the bottom of the cabinet.
Art. 381Item 381
211
,5
12 38,5
30
50,5
20
27
14 Ø 6
15,5
9525 3
13
76,
5
M.5
10
6
3
Ø
Asola da 12,5 e 6,5mm12,5 and 6,5mm slot
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
195
ARTICOLO Item 019
PACK 500
ARTICOLO 019 • Item 019 Occhiello in lamiera grezza da 20/10 • 20/10 rough steel sheet eyelet
Occhiello da saldare sulla struttura del mobile. Da accoppiare con art. 029.Eyelet to be applied by spot-welding to the structure of the furniture. To be coupled with item 029.
ARTICOLO Item 029
PACK 500
ARTICOLO 029 • Item 029 Cerniera ad occhiello in lamiera grezza da 20/10 • 20/10 rough steel sheet hinge with eyelet
L’occhiello viene saldato sulla struttura e l’aletta più corta sulla parte da far ruotare. Il perno è fissato direttamente sulle ali della cerniera per permettere la rotazione completa.The eyelet is welded on the structure and the shortest winglet on the side to be rotated. The pivot is fixed directly on the wings of the hinge to allow full rotation.
3756
2
28
6
14
Ø 25
67,5 21
3828
30
23,8
16
99 30
R11
Ø
CERNIERE PER STRUTTURE METALLICHEHINGES FOR METAL STRUCTURES
196
ARTICOLO Item 024
PACK 500
ARTICOLO 024 • Item 024 Cerniera in lamiera grezza da 20/10 • 20/10 rough steel sheet hinge
La cerniera viene saldata sulla struttura e sulla parte da far ruotare. Il perno è fissato direttamente sulle ali della cerniera per permettere la rotazione completa.The hinge is welded on the structure as well as on the side to be rotated. The pivot is fixed directly on the wings of the hinge to allow full rotation.
SERIE 363 • Item 363 Distanziali per cerniere in PA6 • PA6 spacers for hinges
Distanziali da frapporre fra la cerniera maschio e la cerniera femmina per ridurre la frizione fra le due alette.Spacers to be placed between the male hinge and the female hinge to reduce the friction between the two winglets.
ARTICOLO Item 363 364 365
Ø D 9 10,5 13
Ø D2 5,5 6,5 9,5
S 1,5 2 2
PACK 2000 2000 2000
16 30
283,4
94 30
38R1
92
Ø
Ø D2
S
Ø D